Behringer ULTRA OCTAVER UO100 Manuale utente
- Categoria
- Accessori per chitarra
- Tipo
- Manuale utente
ULTRA OCTAVER UO100
Thank you for showing your confidence in us by purchasing the BEHRINGER ULTRA
OCTAVER UO100. This high-quality effects pedal creates a monster sound by adding
two additional tones using your guitarone and two octaves below the original tone.
Thanks to its high-performance features youll get natural, clear octave sounds with
constant pitch, even for staccato playing.
Octave effect is possible due to a circuitry that generates signals one or more octaves
below the input signal.
1. CONTROLS
Top view
The TRACK selector allows you to optimize the effect pedal for HI, MID and LOW
frequencies and use instruments with different frequency ranges (guitar, bass
guitar, keyboards etc.).
The DIRECT control adjusts the level of the original input signal.
The OCT 1 control adjusts the level of the generated signal one octave below the
original signal.
The OCT 2 control adjusts the level of the generated signal two octaves below the
original signal.
The ON/BATT LED illuminates when the effect is activated. It also serves as a
battery level indicator.
Use the footswitch to activate/deactivate the effect.
Use this 1/4" TS IN connector to plug in the instrument cable.
The 1/4" TS OUT connector sends the signal to your amp.
Use the DC IN connection to plug in a 9 V power supply (not included).
The BATTERY COMPARTMENT is located underneath the pedal cover. To install or
replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. Be
careful not to scratch the unit.
ULTRA OCTAVER UO100
+ The UO100 has no on/off switch. As soon as you insert the jack into the IN
connector, the UO100 begins running. When not using the UO100, remove
the jack from the IN connector. This extends the life of the battery.
The SERIAL NUMBER is located at the bottom.
2. WARRANTY
For our current warranty terms, please refer to our website at http://www.behringer.com.
3. SPECIFICATIONS
In
Connector 1/4" TS
Impedance 500 kW
Out
Connector 1/4" TS
Impedance 1 kW
Power supply 9 V, 100 mA DC regulated
PSU-SB-CN BEHRINGER 220 VAC adaptor China
PSU-SB-EU BEHRINGER 230 VAC adaptor Europe
PSU-SB-JP BEHRINGER 100 VAC adaptor Japan
PSU-SB-SAA BEHRINGER 240 VAC adaptor Australia
PSU-SB-UK BEHRINGER 240 VAC adaptor UK
PSU-SB-UL BEHRINGER 115 VAC adaptor USA
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 30 mA
Dimensions (H x W x D) approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5")
Weight approx. 0.33 kg (0.73 lbs)
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made
from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown.
4. SAFETY INSTRUCTIONS
Do not use near water, or install near heat sources. Use only authorized attachments/accessories. Do not service product yourself.
Contact our qualified servicing personnel for servicing or repairs, especially when power supply cord or plug is damaged.
No utilizar cerca de agua o instalar cerca de fuentes de calor. Utilice sólo accesorios y aditamentos autorizados. No intenté
reparar el producto usted mismo. Contacte a nuestro personal técnico cualificado para servicio y reparaciones, especialmente
cuando la fuente o el cable de alimentación estén dañados.
Technical specifications and appearance subject to change without notice. The information contained herein is correct at the time
of printing. The names of companies, institutions or publications pictured or mentioned and their respective logos are registered
trademarks of their respective owners. Their use neither constitutes a claim of the trademarks by BEHRINGER
®
nor affiliation of
the trademark owners with BEHRINGER
®
. BEHRINGER
®
accepts no liability for any loss which may be suffered by any person
who relies either wholly or in part upon any description, photograph or statement contained herein. Colours and specification may
vary slightly from product. Products are sold through our authorised dealers only. Distributors and dealers are not agents of
BEHRINGER
®
and have absolutely no authority to bind BEHRINGER
®
by any express or implied undertaking or representation.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including
photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle
Studiotechnik GmbH. BEHRINGER
®
is a registered trademark. ALL RIGHTS RESERVED. © 2005 BEHRINGER Spezielle
Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany. Tel. +49 2154 9206 0,
Fax +49 2154 9206 4903
Die deutsche Anleitung ist erhältlich @ www.behringer.com
Manuel francophone en téléchargement sur www.behringer.com
Manual en español disponible en www.behringer.com
Manuali italiani disponibili @ www.behringer.com
Nederlandse handleiding beschikbaar @ www.behringer.com
Suomenkielinen käyttöohje saatavilla osoitteesta www.behringer.com
Svensk manual finns tillgänglig på www.behringer.com
Dansk vejledning findes på @ www.behringer.com
Manual português disponível @ www.behringer.com
Åëëçíéêü åã÷åéñßäéï õðÜñ÷åé äéáèÝóéìï óôç äéåýèõíóç www.behringer.com
-
1
-
2
Behringer ULTRA OCTAVER UO100 Manuale utente
- Categoria
- Accessori per chitarra
- Tipo
- Manuale utente
in altre lingue
Documenti correlati
-
Behringer BOD100 Manuale utente
-
-
-
-
Behringer BLE100 Manuale utente
-
-
-
Behringer ULTRA PHASE SHIFTER UP100 Manuale utente
-
Behringer NR300 Noise Reducer Manuale utente
-