ATV EXS-2 Guida Rapida

Marca: ATV

Modello: EXS-2

Categoria: Tamburi musicali

Tipo: Guida Rapida

Quick Start Guide

aDrums EXS-2

aDrums EXS-1

Contents

Setup

................................................................... 3

Package Contents (aDrums EXS-1) ............................................ 3

Package Contents (aDrums EXS-2) ............................................ 4

Assembly Guide ...........................................................5

Top Panel ............................................................... 10

Rear Panel .............................................................. 11

1 Getting Ready

.........................................................

Connecting Audio Equipment ................................................ 12

Connecting the Pads ...................................................... 12

Zones supported by the xD3's trigger inputs .................................... 13

Power On / O ........................................................... 13

Turning the power o automatically (auto power-o) ...............................13

Trigger settings ........................................................... 14

Cross-talk Cancel Wizard ................................................... 15

2 Performing

............................................................

Home Screen ............................................................ 16

Performing .............................................................. 16

Corresponding styles of playing ..............................................16

Changing the Drum Kit ..................................................... 17

Selecting a drum kit from the list.............................................. 17

3 Detailed Information

....................................................

Details of functions ........................................................ 18

Specications ............................................................ 18

Support ................................................................ 18

4 Important Notice

......................................................

Important Safety Information................................................. 19

Important Information about Use ............................................. 20

Before using aDrums EXS-1/2 be sure to read ‘4 Important Notices’ p.19.

Welcome.

Setup

Package Contents (aDrums EXS-1)

This product includes the following items.

xD3 drum sound

instrument

Multi-trigger cable

Tom Pad Arms x3

Quick Start Guide (this booklet)

Drum key

Cable tie

SD memory card

Kick Pad

Tom Pads x3Snare Pad

Crash Cymbal Pad

Tube A x2

Tube B x2

Tube D

Tube E

Tube F

Tube C

Ride Cymbal Pad

Hi-hat pad

Spurs for Kick Pad

AC adapter

Hi-hat Controller

Drum Rack

Cymbal arms x2Hi-Hat Arm Snare Pad Arm

Package Contents (aDrums EXS-2)

This product includes the following items.

xD3 drum sound

instrument

Multi-trigger cable

Snare Pad /

Tom Pad arms x4

Quick Start Guide (this booklet)

Drum key

Cable tie

SD memory card

Kick Pad

Tom Pads x3Snare Pad

Crash Cymbal Pad

Tube A x2 Tube B x2

Tube D

Tube E

Tube F

Tube C

Ride Cymbal Pad

Hi-hat pad

Spurs for Kick Pad

AC adapter

Hi-hat Controller

Drum Rack

Cymbal Arms x2

Hi-hat Arm

Setup

Assembly Guide

Connect tubes A to F as the gure right shows.

*A corresponding label (A to F) is attached to each tube.

Insert tube A into the tube C clamp

Insert tube A and tube B into the clamps at the ends of tube D

Tube A

Stand L

*Securely tighten the

clamp bolts

*Securely tighten the clamp bolt

Tube B

Tube D

Tube C

Setup

Insert tube A and tube B into the clamps at the ends of tube F

*Securely tighten the

clamp bolts

Stand L

Tube A

Tube B

70mm

Stand R

Attach tube E clamps to stands L and R

Tube E

Tube F

Setup

Attach the cymbal arms

Attach the L-arm to the clamp (1) and the snare to the L-arm (2)

aDrums EXS-1 aDrums EXS-2

*Adjust the tension of the pad head using the

included tuning key.

*Securely

tighten all bolts

Setup

Attach the tom L-arms to the clamps (1) and the toms to the L-arms (2) as shown

Attach the cymbal pads

aDrums EXS-1

aDrums EXS-2

xD-C12B

2 outputs

xD-C12A

1 output

aDrums EXS-1

xD-C12A

Pentagon

Hole

aDrums EXS-2

*Securely tighten all bolts.

*Adjust the tension of the head using the tuning

key included in the package.

Setup

Spur

Attach the spurs to the kick drum pad

*Tighten the knobs

*A kick pedal is not included.

*The tip of the spur can adjusted so it protrudes from the rubber

stopper.

*Note that the spikes can damage oors.

*Note that the spikes can damage your body.

*After completing the assembly verify that all the bolts are securely tightened.

Attach the xD3 drum sound instrument

Setup

担当

生産図

葉数： 1 / 1

図面番号：

名称：

色調：

設計：承認：

発行：ATV株式会社

eD3 TOP PANEL

HR08-****

改定履歴

Mori

2017.3.27

承認日付

公差：±0.3

Gray (C0M0Y0K50)

担当

生産図

葉数： 1 / 1

図面番号：

名称：

色調：

設計：承認：

発行：ATV株式会社

eD3 TOP PANEL

HR08-****

改定履歴

Mori

2017.3.27

承認日付

公差：±0.3

Gray (C0M0Y0K50)

Power Button

Long-press this button to

turn the power on/o.

Value Knob

Use to change and select

dierent settings and menu

items.

PHONES

Audio jack for headphones.

[ENTER/MENU] Button

Use to determine / select

parameters and values.

On the home screen,

“Menu” is displayed.

Drum Kit Buttons[1]--[5]

[1]—[5] Use to select registered

drum kits.

Press button [1] to return to the Home

screen.

[

VOLUMESONG

HOME

TRACK

CLICK

HOME

CLICK

HOME

VARIATION

SONG

1 2 3 4 5

ENTER

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

1 2 3 4 5

ENTER

LIST

HOME

](BACK)Button

Return to the previous screen.

[LIST]Button

Press to display the list of

drum kits for selection.

VOLUME [+][–]Buttons

Use to adjust the

headphone and output volume.

SONG [ ](PLAY/STOP)Button

Use to start and stop the song.

An SD memory card is necessary

for song playback.

Only the buttons being operated light up.

Metronome[

VOLUMESONG

HOME

TRACK

CLICK

HOME

CLICK

HOME

VARIATION

SONG

1 2 3 4 5

ENTER

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

1 2 3 4 5

ENTER

LIST

HOME

]Button

Use to turn on / o the

built-in metronome.

VOLUMESONG

HOME

TRACK

CLICK

HOME

CLICK

HOME

VARIATION

SONG

1 2 3 4 5

ENTER

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

1 2 3 4 5

ENTER

LIST

HOME

Buttons for which there are no

corresponding menu items are unlit. .

About the Function Buttons

Aside from the "Home" screen, buttons

[2] [3] [4] [5] are used to select displayed

menu functions.

For example, as shown on the screen

(right):

[2] Button = DELETE

[4] Button = HELP

[5] Button = LOAD

xD3 Top Panel

Setup

担当

生産図

葉数： 1 / 1

図面番号：

名称：

色調：

設計：承認：

発行：ATV株式会社

eD3 BOTTOM CASE

HR08-****

改定履歴

Mori

2017.3.27

承認日付

公差：±0.3

Gray (C0M0Y0K50)

CRASH 2

Connect an additional

cymbal pad to

expand the drum set.

MIDI OUT

Connect MIDI devices

and send MIDI signals.

USB

The xD3 can be connected to a

Mac or Windows PC, allowing MIDI

messages to be transmitted and

received. Use a USB 2.0 cable.

OUTPUT

These jacks output the

audio signal. Connect

them to a powered

speaker, mixer or audio

interface.

SD CARD

Insert the included SD card that contains

song data. Additional songs can also be

stored and loaded. The SD card is also used

to back-up and import xD3 sound data. The

xD3 is only compatible with SD /SDHC cards

from 2 GB up to 32 GB.

DC IN

Connect the included

AC adapter here.

AUDIO IN

Connect a music player here

so you can play along with the

input audio. The AUDIO IN signal

is routed to main OUTPUT and

PHONES.

MULTI TRIGGER IN

Connect the included multi-trigger

cable here to input trigger signals

from the pads.

About the AC adapter

The AC adapter can be used worldwide.

Attach the included plug that is suitable for the type of outlet in your

country.

*You must use only the included AC adapter and plug.

xD3 Rear Panel

1 Getting Ready

AUDIO IN

USB

SD CARD

DC IN

AUX

ATV LINK

MULTI TRIGGE R

TRIGGER INPUT

R OUTPUT L

L R

Stereo 1/4” jack

for headphones

Mono 1/4” jack outputs

Stereo 3.5mm

mini jack

Connecting Audio Equipment

In order to hear sounds generated by the xD3, one of the following (commercially available items)

is required.

• Headphones, powered speakers, etc.

• You can play along with your own songs and loops by connecting your computer/tablet

headphone output to the xD3’s AUDIO IN jack.

Connecting the pads

First connect the multi-trigger cable to the xD3’s rear panel and then to each pad. Note the

connection destination labeled on each jack plug and connect them as shown in the illustration.

After completing all connections, x the cables onto the stands using the included cable ties.

T1 T2

RDCUP

(BELL)

CTL

1 Getting Ready

Zones supported by the xD3’s trigger inputs

xD3 trigger

input

Supported zone

Choke

method

Notes

KICK Head N/A Input hardware is only single-trigger capable.

SNARE Head,Rim N/A

Side stick sound function can be enabled, see the user’s manual.

(Only available on the snare input.)

TOM 1 Head N/A Input hardware is only single-trigger capable.

TOM 2 Head N/A Input hardware is only single-trigger capable.

TOM 3 Head N/A Input hardware is only single-trigger capable.

HI-HAT Bow,Edge YES

CRASH Bow,Edge YES

RIDE Bow,Edge,Cup YES Three-zone input requires two pad cables.

CRASH 2 Bow,Edge YES

Power On / O

Turning the power on

Lower the volume of the connected amp or speakers.

Long-press the power button of the xD3.

The power turns on.

Turning the power o

Lower the volume of the connected amp or speakers.

Long-press the power button of the xD3.

The power turns o.

All settings are saved.

*Disconnecting the AC adapter without turning o the power can cause malfunctions. Always turn o the power

by pressing the power button.

Turning the power o automatically (auto power-o)

If the xD3 has not been played or operated for 30 minutes, it automatically turns o the power in

order to conserve electricity. This function can be disabled.

For details, please refer to the User’s Manual.

*The power of the hi-hat is not automatically turned o.

1 Getting Ready

Trigger Settings

These settings are used to optimize the performance of the xD3 by calibrating the unit’s triggering

sensitivity in response to signals from the pad sensors.

Setting up the sensitivity of triggers is important when using the equipment for the rst time or

when changing the type of pad.

Help Screen Display

Target Pad Display

Utility Tab

Trigger Ta b

System Tab

Press the [3] (TRIGGER) button and select the trigger tab.

Use the value knob to select an item and press the [ENTER] button.

*These general settings are applied to all drum kits.

Total Pad Response

Increasing the sensitivity of all pads will produce a powerful sound even when

playing with soft taps. This may be suitable for younger children or players who

have a softer playing style. The sensitivity increases as you increase the plus [+]

value.

Pad Model

Use to set the type of pad connected to each trigger input.

*Please use the default setting.

Sensitivity

Use to adjust the sensitivity of each pad. The sensitivity increases as you

increase the value.

Head-Rim Adjust

Use to adjust the balance sensitivity between the head sound and the rim-shot

sound of the snare drum pad.

If the rim-shot sounds consistently when you hit the snare pad head, try

adjusting the slider position more towards the ‘H’ side to nd a balance.

If you nd it dicult to play the rim-shot, try adjusting the slider more to the ‘R’

side.

Pedal HH Sens Use to adjust the volume of the foot-close and foot-splash hi-hat sounds.

HH Close Adjust

Use to adjust the closed position of the hi-hat. If the hi-hat does not sound

suciently ‘closed’ when pressing on the pedal with normal pressure, adjust

this setting to the plus [+] side. If the hi-hat does not sound suciently ‘open’

when the pedal pressure is relaxed or released, adjust this setting to the minus [-]

side.

Cross-Talk Cancel

Wizard

Use to eliminate “cross-talk”, which is an unwanted signal transmission between

pads.

Simply hit each pad according to the Cross-talk Cancel Wizard instructions and

the appropriate settings will be made automatically.

For detailed instructions, please refer to the section about using the "Cross-talk

Cancel Wizard" (p.15).

*Execute this wizard when installing the drum kit for the rst time.

*Cross-talk may reoccur if you change a pad or a pad’s mount location.

*In such cases, please re-execute the wizard.

Use the value knob to change the item and conrm by pressing the [ENTER] button.

1 Getting Ready

Cross-talk Cancel Wizard

Press the [5] (NEXT) button.

To cancel, press the [2] (CANCEL) button.

Follow the instructions on the screen and strike the indicated pad 3 times with powerful

hits.

Indicated Pad

OK Display

*If you press [RETRY], the strikes you made so far will be erased and you can start over.

When "OK" is displayed, press the [5] (NEXT) button to advance to the next step.

Repeat step 1 and step 2 in the same way.

The xD3 measures the cross-talk condition of all connected pads.

KICK > SNARE > TOM 1 > TOM 2 > TOM 3 > HI-HAT > CRASH 1 > RIDE > CRASH 2

*If the indicated pad is not connected, press [SKIP].

When the screen below is displayed, play the drum set and check if there are any remaining

cross-talk problems, then press the [5] (OK) button.

*If you still detect a cross-talk problem, press the [2] (RETRY) button and repeat the wizard again.

*Cross-talk problems may not be completely prevented in all cases.

2 Performing

Home Screen

The Home screen is displayed after turning on the power.

Press the [1] (HOME) button from any screen to return to the Home Screen.

The Home Screen is displayed when playing the drums.

VOLUMESONG

HOME

TRACK

CLICK

HOME

CLICK

HOME

VARIATION

SONG

1 2 3 4 5

ENTER

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

2 3 4 5

ENTER

LIST

HOME

What is an xD3 Drum Kit?

The xD3 patch that assigns sounds to each pad is called a "drum kit". Changing the drum kit

patch to Jazz or Rock changes the sound of each pad to a sound suitable for that genre.

Performing

When you hit the pad, it resounds.

The sound changes naturally according to the strength of the hit.

Use VOLUME [+][–] to adjust the volume.

*Adjust the volume to an appropriate level for natural playing.

If the output volume is too low, it may cause you to exert

unnecessary force when playing, which may cause pain and

possibly injury to your hands and arms. Please avoid setting the

output volume too loud as this may damage your hearing and

the hearing of others around you, especially young children.

It is possible to set a maximum volume limit for the xD3 (Refer to

User’s Manual).

Corresponding styles of playing

Snare drum head shot, rim shot, side stick

Hi-hat bow, edge, open-close, foot close, foot splash

Crash cymbal bow, edge

Ride cymbal Bow, edge, cup

Drum Kit Number

Song Number

Song Playback Icon

Drum Kit Name

Song Name

Metronome Tempo

Visualizer:

Visually displays the

dynamics and timing of the

shots (see User’s Manual)

2 Performing

Changing the Drum Kit

Press one of drum kit buttons [1]—[5].

VOLUMESONG

HOME

TRACK

CLICK

HOME

CLICK

HOME

VARIATION

SONG

1 2 3 4 5

ENTER

–––––––––––––––––––––––––– DRUM KIT ––––––––––––––––––––––––––

1 2 3 4 5

ENTER

LIST

HOME

The drum kit saved for each button is loaded.

*It takes several seconds to load the drum kit.

When the drum kit name is displayed, you can start playing.

Selecting a drum kit from the list

Use this function to select and load a drum kit other than those already assigned to buttons [1]—[5].

Press the [LIST] button.

The list of drum kits will be displayed.

Select the drum kit with the value knob.

Press the [ENTER] button.

The selected drum kit will be loaded.

3 Detailed Information

Details of functions

The xD3 has many other functions.

For detailed information and a detailed explanation of the functions, please refer to the User’s

Manual that you can download from the following URL:

http://www.atvcorporation.com/en/products/drums/exs-2_1/support.html

Specications

Electronic Drum Sound Module

Model: xD3

Item Specication

Terminals and Jacks

AUDIO OUTPUT: L/R, mono ¼ inch (6.35mm) jack x2

PHONES: stereo ¼ inch phone type

AUDIO INPUT: stereo, 3.5mm TRS jack

MULTI-TRIGGER INPUT: dedicated multi-connector, 25 PIN D-sub to individual ¼ inch TRS plugs

CRASH 2 TRIGGER INPUT: ¼ inch TRS jack

USB: 2.0 Type B, for MIDI in/out via USB

MIDI OUT: 5-pin DIN

SD Card: SD/SDHC card (2-32GB only)

DC IN: Only for the included AC adapter

Power supply DC 12 V

Power consumption 600 mA

*Specications and appearance of this product are subject to change without notice for

improvement.

Support

Refer to the following URL for frequently asked questions, rmware updates, and other

information:

http://www.atvcorporation.com/en/products/drums/exs-2_1/support.html

4 Important Notices

Important safety information

Always follow the basic precautions listed below to avoid the possibility of serious injury from re,

electrical shock or other hazards, and serious damages to the aDrums EXS-1/2, instrument or

other goods and assets. Before using aDrums EXS-1/2, be sure to read all the safety information

below.

About the symbols

"Caution": Calls your attention to a point of

caution

"Do not ...": Indicates a prohibited action

"You must ...": Indicates a required action

About warnings and cautions

WARNING

Indicates a hazard that could

result in death or serious injury

CAUTION

Indicates a hazard that could

result in injury or property

damage

WARNING

Do not disassemble or modify

Do not disassemble or modify this product.

Do not use or store in the following

locations

• Locations of high temperature (in direct

sunlight, near heating equipment)

• Moist or humid locations (near a bath or

shower, or on a wet oor)

• Locations subject to salt damage

• Locations subject to water or rain

• Excessively dusty locations

Do not damage the power cord

Do not excessively bend the power cord or

damage it. Do not place heavy objects on top

of the power cord. Doing so may damage the

power cord, causing re or electric shock.

Use the included AC adapter

Use only the included AC adapter. Use the

adapter with the voltage that it species.

Turn o the power if an abnormality or

accident occurs

In the following situations, immediately turn o

the power, disconnect the AC adapter from the

AC outlet, and contact your dealer or ATV for

servicing.

• If the AC adapter, power cord, or plug is

damaged

• If smoke is emitted or an abnormal odor is

noticed

• If liquid or a foreign object enters the unit

• If an abnormality or malfunction occurs in the

unit

Do not drop or subject to strong impact

Do not drop this product or subject it to strong

impact.

Do not plug or unplug the AC adapter with

wet hands

You risk electric shock by doing so.

CAUTION

Grasp the power plug when connecting or

disconnecting

When connecting or disconnecting the AC

adapter from the unit, you must grasp the plug

rather than pulling the power cord.

Don’t use AC outlet multipliers

Doing so will cause the outlet to become hot,

causing a re hazard.

If the power plug is dusty, wipe it o

Dust on the power plug can cause electric shock

or short circuits.

Disconnect the power plug from the AC

outlet if not using the unit for an extended

time, or if lightning is expected

Failure to do so may cause electric shock, re, or

malfunction.

Disconnect all connections before moving

the unit

Failure to do so may cause damage to the power

cord or cables, or may cause people to trip over

the cables.

Don’t place the unit in an unstable location

Doing so may cause the unit to overturn, causing

personal injury.

Don’t sit or stand on the unit, or place

heavy objects on it

Doing so may damage the unit.

You should also avoid applying excessive force

to the buttons, knobs, and input/output jacks.

Doing so will cause malfunctions.

Don’t use the unit at high volume for an

extended time

Using speakers or headphones at high volume

for an extended time will damage your hearing.

Handle the unit with care

Take care that your hands or ngers are not

injured by corners or openings in the unit.

Place small parts out of reach of children

Place small parts out of reach of children who

might accidentally swallow them.

4 Important Notices

Important Information about Use

Installation

• Do not use the instrument in the vicinity of a TV, radio,

stereo equipment, mobile phone, or other electric devices.

Otherwise, the instrument, TV or radio may generate noise.

• Do not expose the instrument to excessive dust or vibrations,

or extreme cold or heat (such as in direct sunlight, near a

heater, or in a car during the day) to prevent the possibility of

panel dis-guration, damage to the internal components or

unstable operation.

• The sensor of the hi-hat is exposed to extremely strong light,

it may cause error.

Power Supply

• Even when the power switch is turned o, electricity is still

owing to the product at the minimum level. When you are

not using the product for a long time, make sure to unplug

the power cord from the wall AC outlet.

Cleaning

• When cleaning the equipment, be sure to use a clean, dry

cloth. Cleaning products that contain organic solvents, paint

thinner, detergents, and chemicallytreated cleaning cloths can

cause discoloration and/or warping and should not be used.

• Do not dirty the reection plate of the hi-hat. Otherwise the

response of the instrument may get worse. When getting

dirty, clean the instrument by using a wet towel.

Data

• The company can not be held responsible for damage

caused by improper use or modications to the instrument or

data that is lost or destroyed.

• The stored contents may be lost due to malfunction of

equipment or incorrect operation. Please backup important

data.

About copyrights

• This product incorporates audio / sound data contents in

which ATV and third parties own copyrights. Using and

copying these materials without permission (except for

personal and other uses permitted by the copyright law) is

prohibited.

• ATV owns copyrights of the contents embedded or attached

to this product. Such copyrighted materials include, without

limitation, all computer software, sound / audio les, style /

image data les, etc. Any unauthorized use of such programs

and contents outside of personal use is not permitted under

relevant laws.

• Do not make, resell, redistribute, or republish the

abovementioned contents attached or aliated to the

product.

About this manual

• The illustrations as shown in this manual are for instructional

purposes only, and may appear somewhat dierent from

those on your instrument.

• The company names and product names in this manual are

the trademarks or registered trademarks of their respective

companies.

La pagina si sta caricando...

ATV EXS-2 Guida Rapida

Marca: ATV

Modello: EXS-2

Categoria: Tamburi musicali

Tipo: Guida Rapida

Scarica PDF

rapporto

in altre lingue

English: ATV EXS-2 Quick start guide

ATV EXS-2 Guida Rapida

ATV EXS-2 Guida Rapida

in altre lingue

Altri documenti