Asus Q470EI-IM-A Manuale utente

Industrial Motherboard

Q470EI-IM-A

ii

E21947

Revised Edition v5

April 2023

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any

means, except documentation kept by the purchaser for backup purposes, without the express written

permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE,

AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO

RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS

MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Chapter 1 Product overview

1.1 Package contents......................................................................... 1-1

1.2 Features ........................................................................................ 1-1

1.3 Specifications ............................................................................... 1-2

Chapter 2 Motherboard information

2.1 Before you proceed ..................................................................... 2-1

2.2 Motherboard layout ...................................................................... 2-2

2.3 Central Processing Unit (CPU) ................................................... 2-4

2.3.1 CPU installation .............................................................. 2-5

2.3.2 CPU heatsink and fan assembly installation ................... 2-7

2.4 System memory ........................................................................... 2-9

2.5 Jumpers ...................................................................................... 2-10

2.6 Connectors ................................................................................. 2-14

2.6.1 Rear panel connectors .................................................. 2-14

2.6.2 Internal connectors ....................................................... 2-16

Chapter 3 BIOS setup

3.1 BIOS Setup program .................................................................... 3-1

3.2 Main menu .................................................................................... 3-2

3.2.1 System Date [Day MM/DD/YYYY] .................................. 3-2

3.2.2 System Time [HH:MM:SS] .............................................. 3-2

3.3 Advanced menu ........................................................................... 3-2

3.3.1 LVDS Conguration ........................................................ 3-2

3.3.2 PCH-FW Conguration ................................................... 3-4

3.3.3 Trusted Computing ......................................................... 3-4

3.3.4 CPU Conguration .......................................................... 3-5

3.3.5 Graphics Conguration ................................................... 3-6

3.3.6 PCI Express Conguration .............................................. 3-6

3.3.7 AMT Conguration .......................................................... 3-8

3.3.8 CSM Conguration .......................................................... 3-8

3.3.9 Super IO Conguration ................................................... 3-9

3.3.10 Serial Console Redirection ........................................... 3-10

3.3.11 SATA And RST Conguration ....................................... 3-12

3.3.12 Network Stack Conguration ........................................ 3-13

3.3.13 USB Conguration ........................................................ 3-13

iv

3.3.14 NVMe Conguration ...................................................... 3-14

3.3.15 Onboard Devices Conguration .................................... 3-14

3.3.16 EZ-Flash ....................................................................... 3-15

3.3.17 APM Conguration ........................................................ 3-15

3.3.18 Watchdog Timer ............................................................ 3-16

3.3.19 Miscellaneous ............................................................... 3-16

3.4 Hardware Monitor menu ............................................................ 3-17

3.4.1 Smart Fan Mode ........................................................... 3-17

3.4.2 Smart Fan Function ...................................................... 3-17

3.5 Security menu ............................................................................ 3-17

3.5.1 Administrator Password ................................................ 3-17

3.5.2 User Password .............................................................. 3-18

3.5.3 Secure Boot .................................................................. 3-18

3.6 Boot menu .................................................................................. 3-19

3.7 Exit menu .................................................................................... 3-20

Appendix

Notices .......................................................................................................A-1

Service and Support .................................................................................A-5

1-1

Chapter 1: General information

1.1 Package contents

Check your industrial motherboard package for the following items.

1 x ASUS Q470EI-IM-A Motherboard

2 x Serial ATA 6.0 Gb/s cables

2 x M.2 screw packages

1 x ASUS I/O Shield

NOTE: If any of the above items is damaged or missing, contact your

distributor or sales representative immediately.

1.2 Features

• Intel® socket 1200 for 10th Gen Intel® Core™ i9/ i7/ i5/ i3, Pentium®, and

Celeron® processors

• Two Dual Channel DDR4 2933/2666/2400/2133 MHz SO-DIMMs up to 64GB

• 3 x SATA 6.0 Gb/s, 3 x USB 3.2 Gen 2, 4 x USB 3.2 Gen 1, 6 x USB 2.0, 5 x

COM ports

• 1 x PCIe x16 slot, 1 x M.2 (Key E, 2230) for WiFi/BT device, 1 x M.2 (Key M,

2242/2260/2280) with PCIe and SATA modes for SSD

• Multi-display: 2 x DisplayPorts, 1 x DVI-D, LVDS/eDP

Chapter 1

Product overview

Q470EI-IM-A

1-2

1.3 Specifications

(continued on the next page)

CPU

Intel® socket 1200 for 10th Gen Intel® Core™ i9/ i7/ i5/ i3,

Pentium®, and Celeron® processors

Supports Intel® 14nm CPU

Supports up to 65W TDP

Chipset Intel® Q470E Chipset

Memory 2 x SO-DIMM, max. 64GB, DDR4 2933/2666/2400/2133

MHz SDRAM

Graphics

Integrated graphics processor - Intel® HD Graphics support

Multi-VGA output support: DP/DVI-D/LVDS ports

- Supports 2x DisplayPort 1.4a outputs with a maximum

resolution of 4096 x 2160 @60 Hz

- Supports DVI-D output with a maximum resolution of

1920 x 1200 @60Hz

- Supports LVDS output with a maximum resolution of

1920 x 1200 @60Hz

- 4 lanes Embedded Display Port output with a maximum

resolution of 3840 x 2160 @60Hz (co-lay with LVDS)

Expansion slots

1 x PCI Express 3.0/2.0 x16 slot*

1 x M.2 socket 1 (Key E, 2230) with PCIe and CNVI modes

for WiFi/BT device

1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and

SATA modes

* Supports PCIe bifurcation (16x to 8x+8x / 8x+4x+4x).

Storage

3 x SATA 6.0 Gb/s ports

1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and

SATA modes

LAN Dual Intel® Lan: 1 x Intel® I219LM, 1 x Intel® I210AT

Audio

Realtek ALC887 / ALC897 High Denition Audio CODEC*

* The audio codec may vary between motherboards, please

consult your sales window for the motherboard’s exact codec

type.

Rear panel I/O ports

1 x DVI-D port

2 x DisplayPorts

3 x USB 3.2 Gen 2 ports (2 x Type-A + 1 x Type-C®)

1 x USB 3.2 Gen 1 port

4 x USB 2.0 ports

2 x LAN (RJ45) ports

1 x P/S2 keyboard port

1 x P/S2 mouse port

1 x COM port (RS232/422/485)

2 x Audio jacks

1-3

Chapter 1: General information

(continued on the next page)

Internal I/O ports

4 x COM Port headers (1 x RS232/422/485, 3 x RS232)

1 x USB 3.2 Gen 1 connector supports additional 2 USB 3.2

Gen 1 ports

1 x USB 3.2 Gen 1 stick socket

1 x USB 2.0 connector supports additional 2 USB 2.0 ports

1 x CPU Fan connector with PWM mode

1 x Chassis Fan connector with PWM mode

1 x Disable ME connector

1 x LVDS/eDP Signal connector

1 x LVDS/eDP Backlight panel connector

1 x I2C connector

1 x LCD panel monitor switch header

1 x Front panel audio header (AAFP)

1 x System panel header

1 x S/PDIF connector

1 x Chassis intrusion header

1 x Speaker connector

1 x Clear CMOS header

1 x LPC Debug header

1 x AT/ATX mode selection header

1 x 24-pin ATX power connector

1 x 8-pin ATX power connector

1 x Display panel VCC power selection header

1 x M.2 socket 1 (Key E, 2230) with PCIe and CNVI modes

for WiFi/BT device

1 x M.2 socket 3 (Key M, 2242/2260/2280) with PCIe and

SATA modes

1 x WDT Enable header

3 x SATA 6.0Gb/s connectors

1 x TPM connector

1 x RTC Battery connector

1 x LVDS/eDP Panel Enable Signal Selection header

GPIO 1 x 8-bit GPIO header

Manageability WfM 2.0, DMI 2.0, WOL by PME

Watch dog timer Yes

Power requirement ATX mode

12V DC-IN (Supported by an additional cable)

Operation Temperature 0~60°C

Non-Operation

Temperature -40~85°C

Q470EI-IM-A

1-4

NOTE: Specications are subject to change without notice. Please refer to the

ASUS website for the latest specications.

Relative Humidity 0%~85%

OS support

Windows® 10 (64-bit)

Windows® IoT Enterprise

Ubuntu

RedHat Enterprise

Fedora Workstation

OpenSUSE

Certification CE, FCC, UL

Form Factor Mini-ITX Form Factor, 6.7”x 6.7” (17.0cm x 17.0cm)

2-1

Chapter 2: Motherboard information

Chapter 2

Motherboard information

2.1 Before you proceed

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

CAUTION!

• Unplug the power cord from the wall socket before touching any

component.

• Before handling components, use a grounded wrist strap or touch a safely

grounded object or a metal object, such as the power supply case, to avoid

damaging them due to static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic

pad or in the bag that came with the component.

• Before you install or remove any component, always remove the AC power

by unplugging the power cord from the power outlet. Failure to do so may

cause severe damage to the motherboard, peripherals, or components.

Q470EI-IM-A

2-2

17.0cm(6.7in)

EATXPWR

DDR4 SO-DIMM_A1* (64bit, 260-pin module)

DDR4 SO-DIMM_B1* (64bit, 260-pin module)

M.2(SOCKET3)

PCIE SATA IRST

X4 V V

LPC_DEBUG

I2C

SPDIF_OUT

VCC_PWR_SEL

BKLTEN_SEL

AT_ATX_SEL

WDT_EN DIS_ME

CHASSIS

F_PANEL

SPEAKER

LCD_BLKT_PANEL

USB_213

COM3

COM4

COM5

COM2

SATA6G_3SATA6G_2SATA6G_1

CLRTC

AAFP

DP_12

AUDIO

Super

I/O

LAN2_U32G1_3

LAN1_U32G2_45

U32G2_C1

U32G1_6

COM2_SEL

COM1_SEL

KBMS

128Mb

BIOS

LGA1200

BATTERY LVDS_EDP

U32G1_78

Intel®

Q470E

ALC887

ALC897

PCIEX16

CPU_FAN CHA_FAN

USB_9~12

PANEL_SW

GPIO_CON

TPM

WGI

219LM

WGI

210AT

DVI

COM1

M.2(WIFI)

2280 2260 2242

EATX12V

18

19

17

16

15

5

6

21

22

23 20

242526

29

30

31

32

27

28

8 9 1 11 12 13 141032 76541

2.2 Motherboard layout

Place this side

towards the rear

of the chassis

NOTE: Place four screws into the holes indicated by circles to secure the

motherboard to the chassis.

CAUTION! Do not overtighten the screws! Doing so can damage the

motherboard.

2-3

Chapter 2: Motherboard information

Connectors/Jumpers/Slots Page

1. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) 2-18

2. Display panel VCC power selection (6-pin VCC_PWR_SEL) 2-10

3. LVDS/eDP Backlight panel connector (5-pin LCD_BLKT_PANEL) 2-23

4. Intel® LGA1200 CPU socket 2-4

5. ATX power connectors (24-pin EATXPWR, 8-pin EATX12V) 2-25

6. COM1/2 Ring/+5V/+12V selection jumpers (6-pin COM1_SEL, COM2_SEL) 2-10

7. General purpose input/output connector (10-pin GPIO_CON) 2-17

8. AT/ATX mode selection (3-pin AT_ATX_SEL) 2-11

9. WDT Enable jumper (2-pin WDT_EN) 2-11

10. Serial port connectors (10-1 pin COM2, COM3, COM4, COM5) 2-23

11. Disable ME connector (3-pin DIS_ME) 2-12

12. Chassis Intrusion header (4-1 pin CHASSIS) 2-12

13. Speaker connector (4-pin SPEAKER) 2-20

14. System panel connector (10-1 pin F_PANEL) 2-19

15. DDR4 SO-DIMM slots 2-9

16. USB 3.2 Gen 1 connector (20-1 pin U32G1_78) 2-16

17. M.2 socket 3 2-21

18. SATA 6.0Gb/s connectors (7-pin SATA6G_1-3) 2-20

19. USB 2.0 connector (10-1 pin USB_213) 2-17

20. I2C connector (6-pin I2C) 2-22

21. LPC debug header (10-1 pin LPC_DEBUG) 2-22

22. Digital audio connector (4-1 pin SPDIF_OUT) 2-24

23. PCI Express 3.0/2.0 x16 slot

24. Clear CMOS header (2-pin CLRTC) 2-13

25. Front panel audio connector (10-1 pin AAFP) 2-24

26. M.2 Wi-Fi 2-21

27. TPM connector (14-1 pin TPM) 2-18

28. USB 3.2 Gen 1 port (U32G1_6) 2-16

29. RTC Battery header (2-pin BATTERY) 2-21

30. LCD panel monitor switch header (2-pin PANEL_SW) 2-16

31. LVDS/eDP Signal connector (LVDS_EPD) 2-20

32. LVDS/eDP Panel Enable Signal Selection header (3-pin BKLTEN_SEL) 2-13

Q470EI-IM-A

2-4

IMPORTANT! Unplug all power cables before installing the CPU.

CAUTION!

• Upon purchase of the motherboard, ensure that the PnP cap is on

the socket and the socket contacts are not bent. Contact your retailer

immediately if the PnP cap is missing, or if you see any damage to the

PnP cap/socket contacts/motherboard components. The manufacturer will

shoulder the cost of repair only if the damage is shipment/transit-related.

• Keep the cap after installing the motherboard. The manufacturer will

process Return Merchandise Authorization (RMA) requests only if the

motherboard comes with the cap on the LGA1200 socket.

• The product warranty does not cover damage to the socket contacts

resulting from incorrect CPU installation/removal, or misplacement/loss/

incorrect removal of the PnP cap.

2.3 Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1200 socket designed for

the Intel® 10th Generation Intel® Core™ i9 / Core™ i7 / Core™ i5 / Core™ i3,

Pentium®, and Celeron® processors.

LGA1200

2-5

Chapter 2: Motherboard information

2.3.1 CPU installation

1

A

B

2 3

Q470EI-IM-A

2-6

A

B

C

4

5

2-7

Chapter 2: Motherboard information

2.3.2 CPU heatsink and fan assembly installation

CAUTION! Apply the Thermal

Interface Material to the CPU

heatsink and CPU before you

install the heatsink and fan if

necessary.

To install the CPU heatsink and fan assembly

B

A

B

1

2

3 4

Q470EI-IM-A

2-8

A

B

A

To uninstall the CPU heatsink and fan assembly

2

1

2-9

Chapter 2: Motherboard information

2.4 System memory

This motherboard comes with two Double Data Rate 4 (DDR4) Small Outline Dual Inline

Memory Module (SO-DIMM) sockets. The gure below illustrates the location of the DDR4

SO-DIMM sockets:

Channel Sockets

Channel A SO-DIMM_B1*

Channel B SO-DIMM_A1*

Installing a DIMM

SO-DIMM_B1*

SO-DIMM_A1*

1 2

To remove a DIMM

B

A

B

A

DIMM_B1*

DIMM_A1*

DIMM_B1*

Recommended memory configuration

Q470EI-IM-A

2-10

2.5 Jumpers

Setting Pins

3V (Default) 1-2

5V 3-4

12V 5-6

1. Display panel VCC power selection (6-pin VCC_PWR_SEL)

5

12V

3

5V

1

246

3V

(Default)

VCC_PWR_SEL

Connector type

HEADER 2 x 3p, 2.54mm pitch, S/T

2. COM1/2 Ring/+5V/+12V selection (6-pin COM1_SEL, COM2_SEL)

Setting Pins

+12V 1-2

+5V 3-4

Ring (Default) 5-6

RI

(Default)

+5V+12V

COM1_SEL

COM2_SEL

12 34 56

RI

(Default)

+5V+12V

1

2

3

4

5

6

A

B

Connector type

HEADER 2x3p, 2.54mm pitch, S/T

2-11

Chapter 2: Motherboard information

3. AT/ATX mode selection (3-pin AT_ATX_SEL)

Pins

1-2 (Default) ATX mode

2-3 AT mode

21 2 3

ATX mode

(Default)

AT mode

AT_ATX_SEL

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

4. WDT Enable jumper (2-pin WDT_EN)

A watchdog timer is an electronic timer that is used to detect and recover

from computer malfunctions. The HW WDT (watchdog timer) Enable jumper

allows the HW watchdog resets the system automatically even when the

system crashes.

WDT_EN

PIN 1

NOTE: By default, this jumper is set to HW WDT enabled with a jumper cap

attached.

Connector type

HEADER 1x2p, 2.54mm pitch, S/T

Q470EI-IM-A

2-12

6. Chassis intrusion header (4-1 pin CHASSIS)

This header is for a chassis-mounted intrusion detection sensor or switch. Connect

one end of the chassis intrusion sensor or switch cable to this connector. The

chassis intrusion sensor or switch sends a high-level signal to this connector when

a chassis component is removed or replaced. The signal is then generated as a

chassis intrusion event.

By default, the pin labeled “Chassis Signal” and “Ground” are shorted with jumper

caps. Remove the jumper caps only when you intend to use the chassis intrusion

detection feature.

PIN 1

+5VSB_MB

Chassis Signal

GND

CHASSIS

Connector type

HEADER 4p, K2, 2.54mm pitch

5. Disable ME jumper (3-pin DIS_ME)

This jumper allows you to enable or disable the Intel® ME function. Set this

jumper to pins 1-2 to enable (default) the Intel® ME function and to pins 2-3 to

disable it.

21 2 3

DIS_ME

Disable intel

ME function

Normal

(Default)

Connector type

HEADER 1x3p, 2.54mm pitch, S/T

La pagina si sta caricando...