NEC DT300 Series Manuale utente

NDA-30917

ISSUE 1.0

UNIVERGE Terminal

DT300 Series

USER’S GUIDE

NEC Infrontia Corporation

2008 July

1.

KEYS AND PARTS

• KEYS AND PARTS ON DTL-8LD-1

Here, explanations are given by taking DTL-8LD-1 as

an example.

(1)

(2)

(3)

(4)

Exit Help

(5)

(6)

Scroll

(7)

1 2 3 (8)

ABC DEF

Recall Feautre

4 5 6 (9)

GHI JKL MNO Answer Mic

(1) Call Indicator Lamp

Lamp at top corner of DT Series Display flashes

when a call terminates to the terminal. Also, when

using Voice Mail service, the Lamp lights steadily

when a message has been left.

(2) LCD

LCD (Liquid Crystal Display) provides DT Series

activity information plus data, time and Soft Key

Operation.

(3) Exit

To exit from the Menu or Help mode and go back

to the time display.

(4) Soft Keys

Any feature shown at the bottom of the LCD is

available. The appropriate feature key is displayed

on the screen according to the call handling pro-

cess.

(5) Help

Explanations of the Soft Keys can be called up on

the LCD by pressing this key.

(6) Programmable Keys

7 8 9

PQRS TUV WXYZ Menu

0 #

Redial

HOLD Transfer Speaker

(13) (14) (15)

(10)

(11)

(12)

These keys can be programmed as Flexible Line

key/Programmable Feature Key by Telephony

Server Administrator.

When Telephony Server Administrator sets “One-

Touch Speed Dial key” on the programmable keys,

users can assign any numbers (ex. Telephone

number, etc.) to the key (up to 24 digits).

1.

* For the assignment of the keys, confirm to the

Telephony Server Administrator.

(7) Recall

Press key to finish the call and hear the dial tone.

(8) Feature

Used to activate any features as terminal setup

functions, etc. and to program One-Touch Speed

Dial Keys.

(9) Answer

When LED on this key is lit, press key to answer a

waiting call.

(10) Mic

Press key to respond hands free. LED on this key

lights during speakerphone operation.

(11) Menu

To access the local menu of DT310/DT330, such

as Call History, Directory or Terminal Setting.

(12) Cursor

By using this key, DT Series user can access to

various features with simple operation.

Details on Cursor key

(a) Volume (UP) key (d) Enter Key

(4-way Scroll UP key)

(b) Redial key (c) Directory key

(4-way Scroll LEFT key) (4-way Scroll RIGHT key)

(a) Volume (DOWN) key

(4-way Scroll DOWN key)

(a) Up/Down

( DOWN UP)

Used to adjust LCD contrast, speaker/receiver

volume, and ringer volume.

• LCD Contrast:

Press ( ) or ( ) key while idle.

• Speaker/Receiver Volume:

Press ( ) or ( ) key during conversation.

• Ringer Volume:

Press ( ) or ( ) key during ringing.

(b) Redial

(Last Number Call, Speed Calling-Station/

Group)

Press key to activate redial feature. Press redi-

al and scroll back through numbers that have

been dialed. When the desired number is dis-

played,

press the or # key to activate dialing.

Note: A-law Countries [Australia, Russia, Latin America,

UK, Middle near East, other Asian nations]: #

µ-law Countries [North America, Japan, Hong

Kong, Taiwan]:

N/A

1.

(d) Enter

(15)Speaker

DT330 Series has shortcut menu for frequently-

used features. Use this key to display the short-

cut menu (see SHORTCUT MENU) and deter-

mine the selected item in the menu.

Also, this key is used as cursor-movement key on

the Menu screen.

UP Move the highlighted area one line up

Controls the built-in speaker which can be used for

Hands Free dialing/monitoring.

LED on key lights when key is active.

* All TDM enabled versions are half duplex hands-

free mode.

• THE OTHER KEYS AND PARTS

DOWN

the screen.

Move the highlighted area one line

down the screen.

Redial (only for DTL-2E-1 and DTL-6DE-1)

(Last Number Call, Speed Calling-Station/Group)

Press key to activate redial feature. Press redial

and scroll back through numbers that have been

dialed.

LEFT

RIGHT

Enter

Go back to the previous screen.

Go to the screen that corresponds to

the highlighted menu item.

Go to the screen that corresponds to

the highlighted menu item.

When the desired number is displayed,

press the or # key to activate dialing.

Note: A-law Countries [Australia, Russia, Latin America,

UK, Middle near East, other Asian nations]: #

µ-law Countries [North America, Japan, Hong

Kong, Taiwan]:

(13)Hold

Press this key to place an internal or external call

on hold.

(14)Transfer

Allows the station user to transfer established calls

to another station, without attendant assistance.

Conf (only for DTL-2E-1 and DTL-6DE-1)

Press key to establish a conversation. LED on key

lights when key is active.

Directory (only for DTL-2E-1 and DTL-6DE-1)

Press key to activate speed calling - system fea-

ture.

Message (only for DTL-2E-1 and DTL-6DE-1)

Press key to access the voice mail system.

1.

Up/Down (only for DTL-2E-1 and DTL-6DE-1)

( DOWN UP)

Used to adjust LCD contrast, speaker/receiver vol-

ume, and ringer volume.

• LCD Contrast:

Press ( ) or ( ) key while idle.

• Speaker/Receiver Volume:

Press ( ) or ( ) key during conversation.

• Ringer Volume:

Press ( ) or ( ) key during ringing.

Directory (only for DTL-2E-1 and DTL-6DE-1)

Press key to activate speed calling - system fea-

ture.

8LD Display (only for DTL-8LD-1)

32 (8 keys x 4 pages) additional programmable

keys (Flexible Line/Programmable Feature key)

are provided. Also, information set to each pro-

grammable key is displayed on 8LD display. For

setting of the programmable key, contact Tele-

phony Server Administrator.

When Telephony Server Administrator sets “One-

Touch Speed Dial key” on the programmable keys,

users can assign any numbers (ex. Telephone

number, etc.) to the key (see TO ORIGINATE A

CALL USING SPEED CALLING (ONE-TOUCH

GHI

(a) (b) (C) (b) (a)

Rachel 1 Julia

Ben 2 FDA

Hannah 3 FDN

James 4 Paul

Scroll

(a) Icon

Status information on the Line key such as Call ter-

mination, Call Hold or Busy can be indicated as fol-

lowing Icons.

Flashing

SPEED CALLING KEYS) and TO REGISTER

NAME ON ONE-TOUCH SPEED CALLING KEY).

User’s Status Icon

• Idle No Icon

Pattern

* For the assignment of the keys, confirm to the

Telephony Server Administrator.

1.

User’s Status

• Call Hold

(Individual Hold/Individual Hold on

Call Park Group)

• Call Hold

(Other Party Hold/Other Party Hold on

Call Park Group)

• Recall (Individual Hold/Exclusive

Call Hold/Call Transfer/Individual

Hold on Call Park Group)

• Recall (Other Party Hold/Other Par-

ty Hold on Call Park Group)

Icon

Flashing

Pattern

Blink

(The icon

will blink

per one

second

cycle.)

Feature Key - Feature Name 6 digits

(c) Page Icon

8LD display has four pages (8 programmable keys

per page). Page Icon key indicates currently dis-

played page. The user can switch the programma-

ble key display from page 1 to 4 by using Scroll

key.

Programmable Key Black background indicates

1 1-8 currently displayed page.

Programmable Key

• Incoming Call

• During Conversation (Individual

Use)

• Call Transfer

• Conference

• During Conversation (Other Party

2

3

4

Steady Lit

9-16

Programmable Key Flashing indicates page with

17-24 event happening.

Programmable Key

17-24

Use)

• Active Feature (Under a setting of

feature key like a “Call Forwarding”)

(b) Programmable Key Information

Programmable Key Information displays the fol-

lowing.

Maximum

Key Description digits to be

displayed

- Name and Number informa-

Note: The icon flashes during events such as call termi-

nation to a line key or call back.

Line Key

One-Touch

Speed Dial Key

tion 8 digits

- Speed Dial Name Informa-

tion 8 digits

- Number Information

1.

Example: Page Turning by Scroll Key

Page 1

Key No. 1 Rachel 1 nglia Key No. 5

Appropriate icons are displayed according to the

feature. These displays cannot be changed by

user.

Key No. 2 Ben

Key No. 3 Hannah

Key No. 4 012345

Switch Page

Page 3

Key No. 17 Peter

Key No. 18 Michael

Key No. 19 Powell

Key No. 20 James

Flashi

2 FDA Key No. 6

3 FDN Key No. 6

4 Paul Key No. 8

Scroll Press twice.

Call on Hold

1 Key No. 21

2 Julia Key No. 22

3 Key No. 23

4 Key No. 24

Scroll

Press Feature Key 2 on Page 3

to answer incoming call.

The following shows each LCD indication when

One-Touch Speed Dial key is set to Programmable

key.

When Station line/Trunk line are assigned.

OR

No icons are displayed.

Note: For example, when an incoming call is terminated

to a line key on Page 3 while Page 1 is being dis-

played on the screen, the screen is not automati-

cally switched from Page 1 to Page 3. The user

must display Page 3 manually and then answer the

incoming call.

The following shows LCD indication of Program-

mable keys.

OR

* Users can register name on each One-Touch

Speed Dial key. For the procedures, see TO REG-

ISTER NAME ON ONE-TOUCH SPEED CALLING

KEY.

When any features using feature access code

are assigned.

Icons turn black.

* Users can register name on each One-Touch

Speed Dial key. For the procedures, see TO REG-

ISTER NAME ON ONE-TOUCH SPEED CALLING

KEY.

1.

(3) Scroll Key

This key is used to turn over the page of 8LD dis-

play.

MENU KEY

From the

Menu

Key, the user can use various

application features such as Directory and Call History.

To Display Menu List

Press Menu key while indicating the current time

on LCD. The Menu List is displayed in LCD. Use

Cursor Key to select desired Menu Item.

Main Menu for DT330 Series

[Menu]

Note: Unavailable Menu items are grayed out.

SIMPLE OPERATION BY MENU KEY

AND CURSOR KEY

By using Menu key and key, DT Series user can

access to Call History, Directory and terminal settings

with simple operation.

As an example, the following shows the operations how

to access to Directory menu.

Press Menu key

[Menu]

1 Hisotry

GHI Answer Mic

1

2

3

Menu Item

1 Call History

2 Directory

3 Setting

Call History

Directory

Settings

Back OK

Description

To view Call History. For details, see

6.1FOR DT330 SERIES in chapter 6 Call

History Operation.

To use Phonebook function. For details,

see PHONEBOOK in chapter 5.

To set up the terminal such as ringing

volume control, LCD display setting and

download of Music on Hold. For details, see

SETUP WITH MENU KEY FOR DT300

SERIES.

9

WXYZ Menu

#

Redial

Speaker

2 Directory

3 Tool

Up Down Back OK

[Directory]

1 Personal

2 System

Up Down Back OK

Press Directory key

Note: DTL-6DE-1/DTL-2E-1 does not have Menu key.

N/A

1.

ICON DISPLAY

The LCD of DT330 Series displays Desktop Icons

which provide notification when events (such as missed

call and voice mail) occur.

Icon Display

4:26 PM TUE 13 APR 2007

SHORTCUT MENU

As shown in the figure below, DT330 Series has

Shortcut Menu for frequently-used features. The user

can access to Shortcut Menu by pressing (Enter)

key.

GHI Press Enter Key

Answer Mic

9

WXYZ Menu

# [Shortcut Menu]

1 Missed Calls

Redial 2 Voice Mail

Speaker

3

MIC DND >>>

Receive IM

Back OK

Feature Icon

Missed Call

Voice Mail

Cursor

Description

This icon appears when there is a

missed call. Once the user has

checked the missed call, this icon will

disappear.

This icon provides notification of

incoming Voice Mail. Once the user

has checked the mail, this icon will

disappear.

This icon indicates the currently

available direction of the Cursor key.

Note: DT310 Series does not support the Shortcut

Menu.

Shortcut Menu includes the following features.

Note: Unavailable Menu items are grayed out.

Shortcut Menu for DT330 Series

Feature Description

1 Missed Calls Access to history of Missed Call.

2 Voice Mail Access to history of incoming Voice Mail.

3 Bluetooth Currently Not Used (grayed out).

1.

PROGRAMMABLE FEATURE KEYS

These are examples of DT Series features available by

pressing the programmable keys. Some features using

feature access code may be programmed by the user.

Others must be programmed by the telephone system

administrator.

AICM:

Press key to activate “Automatic Intercom”.

DICM:

Press key to activate “Dial Intercom”.

DND (Do Not Disturb):

Press key to activate or cancel “Privacy” feature.

FDA:

Press key to activate or cancel “Call Forwarding - All

Calls” feature.

FDN:

Press key to activate, verify or cancel “Call Forwarding

Ŕ Busy Line” feature.

SPD:

One Touch Speed Calling.

MW-SET:

Press key to leave message waiting indication on

boss’ station from secretary’s station.

MW-OFF:

Press key to cancel message waiting indication on

boss’ station from secretary’s station.

P-RLS:

Press key to release “Privacy” feature.

S&R (Save and Repeat):

Press key to store a number or redial a stored number.

SIG:

Press key to cause chime at predetermined station.

NAME:

Press key to register name for the key to One-Touch

Speed Calling key.

N/A

1.

SOFT KEYS

The Soft Keys on the DT Series provide a set of

functions on the LCD that adapts to the changing state

of the telephone. While default Soft Key settings are

provided, desired functions can be assigned to

individual stations as required. The Soft Keys, at the

bottom of the LCD, can display the names of available

functions, names of user-assigned functions and

names of functions assigned by a specific Soft Key

pattern. Displayed Soft Keys can vary, depending on

the state of the phone and/or when the Next/Previous

button is pressed.

4051

7:35 AM MON 18 JUL 2002

MIC DND >>>

Exit Help

Note:

Soft Key function is available for the terminals

with LCD.

Exit Key

Press to exit from the Menu or Help mode and go back

to the time display.

Help Key

Press the Help Key, then desired Soft Key for helpful

information about that key.

MIC (Microphone)

Press the Soft Key below "

MIC

" to activate or

deactivate the Microphone. LED on Mic key will

illuminate when Mic is on.

Default Displays for Each Status

Default Soft Key settings are provided corresponding to

particular functions. Different Soft Key settings are

displayed at the bottom of the LCD depending on the

status, as shown below.

Different patterns of Soft Key settings can be registered

for individual call status and assigned to individual

terminals as required.

IDLE

4:26 PM TUE 13 APR 2004

NAME HSET MIC >>>

DIAL TONE/DIALING

(1) 4:26 PM TUE 13 APR 2004

RLS HSET PICK >>>

Push >>>

(2) 4:26 PM TUE 13 APR 2004

VOICE HSET RLS >>>

RINGING

4:26 PM TUE 13 APR 2004

CONF HSET RLS >>>

1.

The following shows the default display patterns of

BUSY

BUSY 2000

(1) 4:26 PM TUE 13 APR 2004

MUTE HSET RLS >>>

Push >>>

BUSY 2000

(2) 4:26 PM TUE 13 APR 2004

S&R >>>

CONNECTION

2000

4:26 PM TUE 13 APR 2004

MIC DND >>>

CONSULTATION HOLD

TRANSFER 2000

4:26 PM TUE 13 APR 2004

MIC CONF >>>

Soft Key Features

When the Soft Key corresponding to a desired feature

name is operated, the selected feature name starts to

blink on the LCD. The blinking display of available

features takes precedence over the display of features

specified by the Soft Key pattern.

Note:

The Soft Keys can be programmed in System

Data to blink, remain steady, have no indication,

or display a character when either in use or idle.

main features.

PICK (Call Pickup – Group)

Permits a station user to answer any calls directed to

other lines in the user’s preset Call Pickup Group.

CONF (Three-way Calling)

Enables a station user to establish a three-way

conference by connecting an additional party to an

already existing conversation.

VOICE (Voice Call)

Enables the user to make a call to the called party’s

built-in speaker. If the called party’s MIC is on, the

called party can converse on hands-free.

MIC (Microphone On/Off)

Allows the user to turn the microphone on and off for

use with the speakerphone.

HSET (Headset)

Allows the user to go off-and on-hook when using the

headset.

RLS (Release Key)

Allows the user to release the current call when using the

headset, without waiting for the party to hang up.

S&R (Save and Repeat)

Allows a station to save a specific dialed number and

then redial that number later.

1.

MWSET (Message Waiting - Set)

Allows a station to set a Message Waiting indication or

lamp.

HOLD (Call Hold)

Permits a station user to hold a call in progress and to

return to the previously held call.

MWOFF (Message Waiting - Cancel)

Allows a station to cancel a Message Waiting indication

or lamp.

FDB (Call Forwarding – Busy Line)

Permits a call to a busy station to be immediately forwarded

to a predesigned station.

FDA (Call Forwarding – All Calls)

Permits all calls designated for a particular station to be

routed to another station regardless of the busy or idle

status of the called station.

FDL (Logged Out IP Station – Call Destination)

Enables a system to transfer the call to appropriate

station when Dterm whose LOGGED OUT IP STATION

Ŕ CALL DESTINATION has already been registered is

in logout status.

S-SPD (Speed Calling - System)

Allows a station user to call certain frequently dialed

numbers using fewer digits (abbreviated call codes)

than would normally be required.

CAS (CAS-Switch Hook Flash)

Allows the user to send a switchhook flash while on an

outside trunk.

UCDBO (UCD Busy Out)

Allows a station user to block UCD calls and to cancel

Busy Out.

FLASH (Flash)

Provides the station with a switchhook flash.

FDN (Call Forward - No Answer)

Permits a call to an unanswered station to be forwarded

to a predesignated station if the called station does not

answer within a predetermined period of time.

C-RPT (ISDN Malicious Call Trace)

Allows the user to initiate a Call Trace on ISDN calls

only.

G-SPD (Speed Calling - Group)

Allows a station user to share a set of common Speed

Calling numbers with other station users in the group.

P-RLS (Privacy Release)

Allows another station to depress a busy line button

and enter the conversation of a station already

engaged in communication.

DND (Do Not Disturb)

Allows a station user to deny access to the station line

for incoming calls.

E-OVR (Executive Override)

Enables selected stations users, upon encountering a

busy condition at an internal station, to bridge into the

busy connection.

PAGE (Button Page)

Allows the user to toggle between pages when two

numbers are registered on One-Touch Speed Calling

key.

CW (Call Waiting)

Enables a busy station to receive a second incoming call.

N/A

1.

A camp-on indication tone is sent to the busy station, and

the user can use a switchhook flash to answer the second

call.

CB (Call Back)

Provides the ability for a calling station to set a CALL

BACK. The calling station will be rung as soon as the

busy station becomes available.

SIG (Manual Signaling)

Permits station users to send a one-second ring to a

predetermined station. If the signaled station is ringing

from another call, the manual intercom signal will

interrupt that ringing.

CKEEP (Eight-Party Conference Retrain)

Allows all outside parties to stay on a conference when

all internal parties hang up.

SCALL (Serial Call)

Allows the user to set Serial Call for the caller before

extending the call, allowing the caller to receive an

announcement at the end of the call guiding the caller

to dial the next number and subsequent numbers.

IZP (Internal Zone Paging)

Allows a user to make a voice call through the speakers

of the designated group.

IDCHG (Call ID Change Display)

Allows the user to toggle between standard display and

an alternate display.

GPICK (Call Pickup - Group Enhancement)

Allows the user to answer any ringing station within the

user's expanded call pickup group.

CHCNF (Call Hold - Conference)

Allows a station user to establish a conference

connection by adding a third party, who is held on

another line, to the existing two-party connection.

VISIT (Survivable Remote MGC)

Allows a station to indicate a status: when a user is in

remote office, VISIT will be blinking. After recovering

the main office, VISIT will return to light.

RMUTE (Ringer Mute)

Allows a station user to mute or recover station ringing.

>>> (Display Function Next Page)

Allows the user to scroll to the next screen.

<<< (Display Function Previous Page)

Allows the user to scroll to the previous screen.

N/A

SETUP WITH UP/DOWN KEY

• TO ADJUST RINGER TONE

DT300 Series

• TO ADJUST HANDSET RECEIVER Press Up/Down ( or / ) key during ringing.

VOLUME

DT300 Series

Press Up/Down ( or / ) key in the off-hook

status or during the call.

RING

LCD indication for North America, Latin America, Asia,

Middle East and Russia

• TO ADJUST LCD CONTRAST

DT300 Series

HANDSET

Press Up/Down ( or / ) key in the on-hook

status.

LCD indication for Australia

HANDSET LCD

• TO ADJUST SPEAKER VOLUME

DT300 Series

Press Up/Down ( or / ) key during

speakerphone operation or during the call.

SPEAKER

SETUP WITH FEATURE KEY

• MICROPHONE ON/OFF DT300 Series

LED on Mic

key shows the status of the built-in

microphone.

Press soft key associated with the MIC Display or

press Feature and 1 key.

• TO CHANGE HANDSET RECEIVER

VOLUME DT300 Series

Press Feature and 3 key. The LCD displays the

selected tone number (n=1 ~ 17).

RINGER TONE n

4:26 PM TUE 13 APR 2004

No. Frequency (Hz) Modulation (Hz)

1 520/660 16

2 520/660 8

3 1100/1400 16

Handset receiver volume can be changed.

4 660/760 16

5 Melody 1

Press

Feature

and 2 key. The LCD displays the

6 Melody 2

current volume status.

7 Melody 3

8 Melody 4

RCV VOL. SMALL

9 Melody 5

4:26 PM TUE 13 APR 2004

10 Melody 6

Press Feature and 2 key to alternate between

Large and Small volume.

RCV VOL. LARGE

4:26 PM TUE 13 APR 2004

• TO SELECT RINGER TONE DT300 Series

DT Series has 10 kinds of ringer tones that you can

select.

Note: Tone number 5, 6, 8~10 (Melody 1, 2, 4~6) will

sound continuously.

• TO ADJUST TRANSMISSION/RECEIV-

ING VOLUME DT300 Series

Handset volume can be changed.

Press Feature and 4 key. The LCD displays the

current volume.

T/R VOL. SMALL

4:26 PM TUE 13 APR 2004

Press Feature and 4 key again to alternate

between Small and Large volume.

T/R VOL. LARGE

4:26 PM TUE 13 APR 2004

• TO ACTIVATE HANDS-FREE DT300 Series

To set hands-free on:

Press Feature and 5 key. The LCD displays:

HANDS FREE ON

4:26 PM TUE 13 APR 2004

To Set Hands-Free Off:

Press Feature and 6 key. The LCD displays:

HANDS FREE OFF

4:26 PM TUE 13 APR 2004

• CALL INDICATOR LAMP ON/OFF

DT300 Series

The user can choose to turn the call indicator lamp

either on or off during ringing.

Press Feature and 7 key. The LCD displays:

INDICATOR ON

4:26 PM TUE 13 APR 2004

INDICATOR OFF

4:26 PM TUE 13 APR 2004

Note:

The call indicator lamp lights when used as a

Message Waiting Lamp, even when it is turned

off by the above operation.

• DYNAMIC DIAL PAD ON/OFF

DT300 Series

The user can originate a call at first hand without lifting

handset or pressing Speaker key.

Press Feature and 8 key. The LCD displays:

Direct Dial Pad ON

4:26 PM TUE 13 APR 2004

Direct Dial Pad OFF

4:26 PM TUE 13 APR 2004

Note: When this feature is ON, the user may initiate a

call by immediately dialing the number and the

station will go hands-free off-hook automatically.

Please note when the features on the following

pages are used in conjunction with Dynamic Dial

Pad, that the user does not have to press the

Speaker key or lift the handset to receive dial

tone.

SETUP WITH MENU KEY FOR

DT300 SERIES

• TO CHANGE RINGER TONE VOLUME

DT300

The procedure below shows how to change the volume

of ringer tone.

While indicating the current time on LCD, press

Menu key to open the Menu screen.

Select 3 Setting and then press (Enter),

(Right-cursor) or OK soft key. (or press 3 key.)

[Menu]

1 Call History

2 Directory

3 Settings

Back OK

Select 1 Ring Volume and then press

(Enter), (Right-cursor) or OK soft key. (or

press 1 key.)

[Settings]

1 Ring Volume

2 Offhook Ring

3 Back Light

4 Headset Ring

5 Peripherals

Back OK

Ring Volume can be set in 13 levels (0 - 12). Adjust

the ringer tone volume by using key and then

press (Enter) or OK soft key.

Turn the volume up.

Turn the volume down.

[Ring Volume]

[ ]

Back OK

• TO ENABLE/DISABLE OFF-HOOK

RINGING DT300

The procedure below shows how to

While indicating the current time on LCD, press

Menu key to open the Menu screen.

Select 3 Setting and then press (Enter),

(Right-cursor) or OK soft key. (or press 3 key.)

[Menu]

1 Call History

2 Directory

3 Settings

Back OK

Select 2 Offhook Ring and then press

(Enter), (Right-cursor) or OK soft key. (or

press 2 key.)

[Settings]

1 Ring Volume

2 Offhook Ring

3 Back Light

4 Headset Ring

5 Peripherals

Back OK

To disable/enable the off-hook ringing, select

1 Disable or 2 Enable. Then, press (Enter)

or OK soft key.

[Offhook Ring]

1 Disable

2 Enable

Back OK

Note: Default setting is 2 Enable.

Note: The currently enabled item is highlighted.

La pagina sta caricando ...

NEC DT300 Series Manuale utente

Questo manuale è adatto anche per

NEC DT300 Series Manuale utente

in altre lingue

Documenti correlati

Altri documenti