NEC DTL-8LD-1 Manuale utente

Tipo
Manuale utente

Questo manuale è adatto anche per

NDA-30917
ISSUE 1.0
UNIVERGE Terminal
DT300 Series
USER’S GUIDE
NEC Infrontia Corporation
2008 July
1.
KEYS AND PARTS
KEYS AND PARTS ON DTL-8LD-1
Here, explanations are given by taking DTL-8LD-1 as
an example.
(1)
(2)
(3)
(4)
Exit Help
(5)
(6)
Scroll
(7)
1 2 3 (8)
ABC DEF
Recall Feautre
4 5 6 (9)
GHI JKL MNO Answer Mic
(1) Call Indicator Lamp
Lamp at top corner of DT Series Display flashes
when a call terminates to the terminal. Also, when
using Voice Mail service, the Lamp lights steadily
when a message has been left.
(2) LCD
LCD (Liquid Crystal Display) provides DT Series
activity information plus data, time and Soft Key
Operation.
(3) Exit
To exit from the Menu or Help mode and go back
to the time display.
(4) Soft Keys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is displayed
on the screen according to the call handling pro-
cess.
(5) Help
Explanations of the Soft Keys can be called up on
the LCD by pressing this key.
(6) Programmable Keys
7 8 9
PQRS TUV WXYZ Menu
0 #
Redial
HOLD Transfer Speaker
(13) (14) (15)
(10)
(11)
(12)
These keys can be programmed as Flexible Line
key/Programmable Feature Key by Telephony
Server Administrator.
When Telephony Server Administrator sets “One-
Touch Speed Dial key on the programmable keys,
users can assign any numbers (ex. Telephone
number, etc.) to the key (up to 24 digits).
1.
* For the assignment of the keys, confirm to the
Telephony Server Administrator.
(7) Recall
Press key to finish the call and hear the dial tone.
(8) Feature
Used to activate any features as terminal setup
functions, etc. and to program One-Touch Speed
Dial Keys.
(9) Answer
When LED on this key is lit, press key to answer a
waiting call.
(10) Mic
Press key to respond hands free. LED on this key
lights during speakerphone operation.
(11) Menu
To access the local menu of DT310/DT330, such
as Call History, Directory or Terminal Setting.
(12) Cursor
By using this key, DT Series user can access to
various features with simple operation.
Details on Cursor key
(a) Volume (UP) key (d) Enter Key
(4-way Scroll UP key)
(b) Redial key (c) Directory key
(4-way Scroll LEFT key) (4-way Scroll RIGHT key)
(a) Volume (DOWN) key
(4-way Scroll DOWN key)
(a) Up/Down
( DOWN UP)
Used to adjust LCD contrast, speaker/receiver
volume, and ringer volume.
• LCD Contrast:
Press ( ) or ( ) key while idle.
Speaker/Receiver Volume:
Press ( ) or ( ) key during conversation.
• Ringer Volume:
Press ( ) or ( ) key during ringing.
(b) Redial
(Last Number Call, Speed Calling-Station/
Group)
Press key to activate redial feature. Press redi-
al and scroll back through numbers that have
been dialed. When the desired number is dis-
played,
press the or # key to activate dialing.
Note: A-law Countries [Australia, Russia, Latin America,
UK, Middle near East, other Asian nations]: #
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:
N/A
N/A
1.
(d) Enter
(15)Speaker
DT330 Series has shortcut menu for frequently-
used features. Use this key to display the short-
cut menu (see SHORTCUT MENU) and deter-
mine the selected item in the menu.
Also, this key is used as cursor-movement key on
the Menu screen.
UP Move the highlighted area one line up
Controls the built-in speaker which can be used for
Hands Free dialing/monitoring.
LED on key lights when key is active.
* All TDM enabled versions are half duplex hands-
free mode.
THE OTHER KEYS AND PARTS
DOWN
the screen.
Move the highlighted area one line
down the screen.
Redial (only for DTL-2E-1 and DTL-6DE-1)
(Last Number Call, Speed Calling-Station/Group)
Press key to activate redial feature. Press redial
and scroll back through numbers that have been
dialed.
LEFT
RIGHT
Enter
Go back to the previous screen.
Go to the screen that corresponds to
the highlighted menu item.
Go to the screen that corresponds to
the highlighted menu item.
When the desired number is displayed,
press the or # key to activate dialing.
Note: A-law Countries [Australia, Russia, Latin America,
UK, Middle near East, other Asian nations]: #
µ-law Countries [North America, Japan, Hong
Kong, Taiwan]:
(13)Hold
Press this key to place an internal or external call
on hold.
(14)Transfer
Allows the station user to transfer established calls
to another station, without attendant assistance.
Conf (only for DTL-2E-1 and DTL-6DE-1)
Press key to establish a conversation. LED on key
lights when key is active.
Directory (only for DTL-2E-1 and DTL-6DE-1)
Press key to activate speed calling - system fea-
ture.
Message (only for DTL-2E-1 and DTL-6DE-1)
Press key to access the voice mail system.
1.
Up/Down (only for DTL-2E-1 and DTL-6DE-1)
( DOWN UP)
Used to adjust LCD contrast, speaker/receiver vol-
ume, and ringer volume.
• LCD Contrast:
Press ( ) or ( ) key while idle.
Speaker/Receiver Volume:
Press ( ) or ( ) key during conversation.
• Ringer Volume:
Press ( ) or ( ) key during ringing.
Directory (only for DTL-2E-1 and DTL-6DE-1)
Press key to activate speed calling - system fea-
ture.
8LD Display (only for DTL-8LD-1)
32 (8 keys x 4 pages) additional programmable
keys (Flexible Line/Programmable Feature key)
are provided. Also, information set to each pro-
grammable key is displayed on 8LD display. For
setting of the programmable key, contact Tele-
phony Server Administrator.
When Telephony Server Administrator sets “One-
Touch Speed Dial keyon the programmable keys,
users can assign any numbers (ex. Telephone
number, etc.) to the key (see TO ORIGINATE A
CALL USING SPEED CALLING (ONE-TOUCH
GHI
(a) (b) (C) (b) (a)
Rachel 1 Julia
Ben 2 FDA
Hannah 3 FDN
James 4 Paul
Scroll
(a) Icon
Status information on the Line key such as Call ter-
mination, Call Hold or Busy can be indicated as fol-
lowing Icons.
Flashing
SPEED CALLING KEYS) and TO REGISTER
NAME ON ONE-TOUCH SPEED CALLING KEY).
User’s Status Icon
Idle No Icon
Pattern
* For the assignment of the keys, confirm to the
Telephony Server Administrator.
1.
User’s Status
• Call Hold
(Individual Hold/Individual Hold on
Call Park Group)
• Call Hold
(Other Party Hold/Other Party Hold on
Call Park Group)
Recall (Individual Hold/Exclusive
Call Hold/Call Transfer/Individual
Hold on Call Park Group)
Recall (Other Party Hold/Other Par-
ty Hold on Call Park Group)
Icon
Flashing
Pattern
Blink
(The icon
will blink
per one
second
cycle.)
Feature Key - Feature Name 6 digits
(c) Page Icon
8LD display has four pages (8 programmable keys
per page). Page Icon key indicates currently dis-
played page. The user can switch the programma-
ble key display from page 1 to 4 by using Scroll
key.
Programmable Key Black background indicates
1 1-8 currently displayed page.
Programmable Key
• Incoming Call
• During Conversation (Individual
Use)
• Call Transfer
• Conference
• During Conversation (Other Party
2
3
4
Steady Lit
9-16
Programmable Key Flashing indicates page with
17-24 event happening.
Programmable Key
17-24
Use)
• Active Feature (Under a setting of
feature key like a “Call Forwarding”)
(b) Programmable Key Information
Programmable Key Information displays the fol-
lowing.
Maximum
Key Description digits to be
displayed
- Name and Number informa-
Note: The icon flashes during events such as call termi-
nation to a line key or call back.
Line Key
One-Touch
Speed Dial Key
tion 8 digits
- Speed Dial Name Informa-
tion 8 digits
- Number Information
1.
Example: Page Turning by Scroll Key
Page 1
Key No. 1 Rachel 1 nglia Key No. 5
Appropriate icons are displayed according to the
feature. These displays cannot be changed by
user.
Key No. 2 Ben
Key No. 3 Hannah
Key No. 4 012345
Switch Page
Page 3
Key No. 17 Peter
Key No. 18 Michael
Key No. 19 Powell
Key No. 20 James
Flashi
2 FDA Key No. 6
3 FDN Key No. 6
4 Paul Key No. 8
Scroll Press twice.
Call on Hold
1 Key No. 21
2 Julia Key No. 22
3 Key No. 23
4 Key No. 24
Scroll
Press Feature Key 2 on Page 3
to answer incoming call.
The following shows each LCD indication when
One-Touch Speed Dial key is set to Programmable
key.
When Station line/Trunk line are assigned.
OR
No icons are displayed.
Note: For example, when an incoming call is terminated
to a line key on Page 3 while Page 1 is being dis-
played on the screen, the screen is not automati-
cally switched from Page 1 to Page 3. The user
must display Page 3 manually and then answer the
incoming call.
The following shows LCD indication of Program-
mable keys.
OR
* Users can register name on each One-Touch
Speed Dial key. For the procedures, see TO REG-
ISTER NAME ON ONE-TOUCH SPEED CALLING
KEY.
When any features using feature access code
are assigned.
Icons turn black.
* Users can register name on each One-Touch
Speed Dial key. For the procedures, see TO REG-
ISTER NAME ON ONE-TOUCH SPEED CALLING
KEY.
1.
(3) Scroll Key
This key is used to turn over the page of 8LD dis-
play.
MENU KEY
From the
Menu
Key, the user can use various
application features such as Directory and Call History.
To Display Menu List
Press Menu key while indicating the current time
on LCD. The Menu List is displayed in LCD. Use
Cursor Key to select desired Menu Item.
Main Menu for DT330 Series
[Menu]
Note: Unavailable Menu items are grayed out.
SIMPLE OPERATION BY MENU KEY
AND CURSOR KEY
By using Menu key and key, DT Series user can
access to Call History, Directory and terminal settings
with simple operation.
As an example, the following shows the operations how
to access to Directory menu.
Press Menu key
[Menu]
1 Hisotry
GHI Answer Mic
1
2
3
Menu Item
1 Call History
2 Directory
3 Setting
Call History
Directory
Settings
Back OK
Description
To view Call History. For details, see
6.1FOR DT330 SERIES in chapter 6 Call
History Operation.
To use Phonebook function. For details,
see PHONEBOOK in chapter 5.
To set up the terminal such as ringing
volume control, LCD display setting and
download of Music on Hold. For details, see
SETUP WITH MENU KEY FOR DT300
SERIES.
9
WXYZ Menu
#
Redial
Speaker
2 Directory
3 Tool
Up Down Back OK
[Directory]
1 Personal
2 System
Up Down Back OK
Press Directory key
Note: DTL-6DE-1/DTL-2E-1 does not have Menu key.
N/A
1.
ICON DISPLAY
The LCD of DT330 Series displays Desktop Icons
which provide notification when events (such as missed
call and voice mail) occur.
Icon Display
4:26 PM TUE 13 APR 2007
SHORTCUT MENU
As shown in the figure below, DT330 Series has
Shortcut Menu for frequently-used features. The user
can access to Shortcut Menu by pressing (Enter)
key.
GHI Press Enter Key
Answer Mic
9
WXYZ Menu
# [Shortcut Menu]
1 Missed Calls
Redial 2 Voice Mail
Speaker
3
MIC DND >>>
Receive IM
Back OK
Feature Icon
Missed Call
Voice Mail
Cursor
Description
This icon appears when there is a
missed call. Once the user has
checked the missed call, this icon will
disappear.
This icon provides notification of
incoming Voice Mail. Once the user
has checked the mail, this icon will
disappear.
This icon indicates the currently
available direction of the Cursor key.
Note: DT310 Series does not support the Shortcut
Menu.
Shortcut Menu includes the following features.
Note: Unavailable Menu items are grayed out.
Shortcut Menu for DT330 Series
Feature Description
1 Missed Calls Access to history of Missed Call.
2 Voice Mail Access to history of incoming Voice Mail.
3 Bluetooth Currently Not Used (grayed out).
1.
PROGRAMMABLE FEATURE KEYS
These are examples of DT Series features available by
pressing the programmable keys. Some features using
feature access code may be programmed by the user.
Others must be programmed by the telephone system
administrator.
AICM:
Press key to activate “Automatic Intercom”.
DICM:
Press key to activate “Dial Intercom”.
DND (Do Not Disturb):
Press key to activate or cancel “Privacy” feature.
FDA:
Press key to activate or cancel “Call Forwarding - All
Calls” feature.
FDN:
Press key to activate, verify or cancel “Call Forwarding
Ŕ Busy Line” feature.
SPD:
One Touch Speed Calling.
MW-SET:
Press key to leave message waiting indication on
boss’ station from secretary’s station.
MW-OFF:
Press key to cancel message waiting indication on
boss’ station from secretary’s station.
P-RLS:
Press key to release “Privacy” feature.
S&R (Save and Repeat):
Press key to store a number or redial a stored number.
SIG:
Press key to cause chime at predetermined station.
NAME:
Press key to register name for the key to One-Touch
Speed Calling key.
N/A
N/A
1.
SOFT KEYS
The Soft Keys on the DT Series provide a set of
functions on the LCD that adapts to the changing state
of the telephone. While default Soft Key settings are
provided, desired functions can be assigned to
individual stations as required. The Soft Keys, at the
bottom of the LCD, can display the names of available
functions, names of user-assigned functions and
names of functions assigned by a specific Soft Key
pattern. Displayed Soft Keys can vary, depending on
the state of the phone and/or when the Next/Previous
button is pressed.
4051
7:35 AM MON 18 JUL 2002
MIC DND >>>
Exit Help
Note:
Soft Key function is available for the terminals
with LCD.
Exit Key
Press to exit from the Menu or Help mode and go back
to the time display.
Help Key
Press the Help Key, then desired Soft Key for helpful
information about that key.
MIC (Microphone)
Press the Soft Key below "
MIC
" to activate or
deactivate the Microphone. LED on Mic key will
illuminate when Mic is on.
Default Displays for Each Status
Default Soft Key settings are provided corresponding to
particular functions. Different Soft Key settings are
displayed at the bottom of the LCD depending on the
status, as shown below.
Different patterns of Soft Key settings can be registered
for individual call status and assigned to individual
terminals as required.
IDLE
4:26 PM TUE 13 APR 2004
NAME HSET MIC >>>
DIAL TONE/DIALING
(1) 4:26 PM TUE 13 APR 2004
RLS HSET PICK >>>
Push >>>
(2) 4:26 PM TUE 13 APR 2004
VOICE HSET RLS >>>
RINGING
4:26 PM TUE 13 APR 2004
CONF HSET RLS >>>
1.
The following shows the default display patterns of
BUSY
BUSY 2000
(1) 4:26 PM TUE 13 APR 2004
MUTE HSET RLS >>>
Push >>>
BUSY 2000
(2) 4:26 PM TUE 13 APR 2004
S&R >>>
CONNECTION
2000
4:26 PM TUE 13 APR 2004
MIC DND >>>
CONSULTATION HOLD
TRANSFER 2000
4:26 PM TUE 13 APR 2004
MIC CONF >>>
Soft Key Features
When the Soft Key corresponding to a desired feature
name is operated, the selected feature name starts to
blink on the LCD. The blinking display of available
features takes precedence over the display of features
specified by the Soft Key pattern.
Note:
The Soft Keys can be programmed in System
Data to blink, remain steady, have no indication,
or display a character when either in use or idle.
main features.
PICK (Call Pickup Group)
Permits a station user to answer any calls directed to
other lines in the user’s preset Call Pickup Group.
CONF (Three-way Calling)
Enables a station user to establish a three-way
conference by connecting an additional party to an
already existing conversation.
VOICE (Voice Call)
Enables the user to make a call to the called party’s
built-in speaker. If the called party’s MIC is on, the
called party can converse on hands-free.
MIC (Microphone On/Off)
Allows the user to turn the microphone on and off for
use with the speakerphone.
HSET (Headset)
Allows the user to go off-and on-hook when using the
headset.
RLS (Release Key)
Allows the user to release the current call when using the
headset, without waiting for the party to hang up.
S&R (Save and Repeat)
Allows a station to save a specific dialed number and
then redial that number later.
1.
MWSET (Message Waiting - Set)
Allows a station to set a Message Waiting indication or
lamp.
HOLD (Call Hold)
Permits a station user to hold a call in progress and to
return to the previously held call.
MWOFF (Message Waiting - Cancel)
Allows a station to cancel a Message Waiting indication
or lamp.
FDB (Call Forwarding Busy Line)
Permits a call to a busy station to be immediately forwarded
to a predesigned station.
FDA (Call Forwarding All Calls)
Permits all calls designated for a particular station to be
routed to another station regardless of the busy or idle
status of the called station.
FDL (Logged Out IP Station Call Destination)
Enables a system to transfer the call to appropriate
station when Dterm whose LOGGED OUT IP STATION
Ŕ CALL DESTINATION has already been registered is
in logout status.
S-SPD (Speed Calling - System)
Allows a station user to call certain frequently dialed
numbers using fewer digits (abbreviated call codes)
than would normally be required.
CAS (CAS-Switch Hook Flash)
Allows the user to send a switchhook flash while on an
outside trunk.
UCDBO (UCD Busy Out)
Allows a station user to block UCD calls and to cancel
Busy Out.
FLASH (Flash)
Provides the station with a switchhook flash.
FDN (Call Forward - No Answer)
Permits a call to an unanswered station to be forwarded
to a predesignated station if the called station does not
answer within a predetermined period of time.
C-RPT (ISDN Malicious Call Trace)
Allows the user to initiate a Call Trace on ISDN calls
only.
G-SPD (Speed Calling - Group)
Allows a station user to share a set of common Speed
Calling numbers with other station users in the group.
P-RLS (Privacy Release)
Allows another station to depress a busy line button
and enter the conversation of a station already
engaged in communication.
DND (Do Not Disturb)
Allows a station user to deny access to the station line
for incoming calls.
E-OVR (Executive Override)
Enables selected stations users, upon encountering a
busy condition at an internal station, to bridge into the
busy connection.
PAGE (Button Page)
Allows the user to toggle between pages when two
numbers are registered on One-Touch Speed Calling
key.
CW (Call Waiting)
Enables a busy station to receive a second incoming call.
N/A
1.
A camp-on indication tone is sent to the busy station, and
the user can use a switchhook flash to answer the second
call.
CB (Call Back)
Provides the ability for a calling station to set a CALL
BACK. The calling station will be rung as soon as the
busy station becomes available.
SIG (Manual Signaling)
Permits station users to send a one-second ring to a
predetermined station. If the signaled station is ringing
from another call, the manual intercom signal will
interrupt that ringing.
CKEEP (Eight-Party Conference Retrain)
Allows all outside parties to stay on a conference when
all internal parties hang up.
SCALL (Serial Call)
Allows the user to set Serial Call for the caller before
extending the call, allowing the caller to receive an
announcement at the end of the call guiding the caller
to dial the next number and subsequent numbers.
IZP (Internal Zone Paging)
Allows a user to make a voice call through the speakers
of the designated group.
IDCHG (Call ID Change Display)
Allows the user to toggle between standard display and
an alternate display.
GPICK (Call Pickup - Group Enhancement)
Allows the user to answer any ringing station within the
user's expanded call pickup group.
CHCNF (Call Hold - Conference)
Allows a station user to establish a conference
connection by adding a third party, who is held on
another line, to the existing two-party connection.
VISIT (Survivable Remote MGC)
Allows a station to indicate a status: when a user is in
remote office, VISIT will be blinking. After recovering
the main office, VISIT will return to light.
RMUTE (Ringer Mute)
Allows a station user to mute or recover station ringing.
>>> (Display Function Next Page)
Allows the user to scroll to the next screen.
<<< (Display Function Previous Page)
Allows the user to scroll to the previous screen.
N/A
SETUP WITH UP/DOWN KEY
TO ADJUST RINGER TONE
DT300 Series
TO ADJUST HANDSET RECEIVER Press Up/Down ( or / ) key during ringing.
VOLUME
DT300 Series
Press Up/Down ( or / ) key in the off-hook
status or during the call.
RING
LCD indication for North America, Latin America, Asia,
Middle East and Russia
TO ADJUST LCD CONTRAST
DT300 Series
HANDSET
Press Up/Down ( or / ) key in the on-hook
status.
LCD indication for Australia
HANDSET LCD
TO ADJUST SPEAKER VOLUME
DT300 Series
Press Up/Down ( or / ) key during
speakerphone operation or during the call.
SPEAKER
SETUP WITH FEATURE KEY
MICROPHONE ON/OFF DT300 Series
LED on Mic
key shows the status of the built-in
microphone.
Press soft key associated with the MIC Display or
press Feature and 1 key.
TO CHANGE HANDSET RECEIVER
VOLUME DT300 Series
Press Feature and 3 key. The LCD displays the
selected tone number (n=1 ~ 17).
RINGER TONE n
4:26 PM TUE 13 APR 2004
No. Frequency (Hz) Modulation (Hz)
1 520/660 16
2 520/660 8
3 1100/1400 16
Handset receiver volume can be changed.
4 660/760 16
5 Melody 1
Press
Feature
and 2 key. The LCD displays the
6 Melody 2
current volume status.
7 Melody 3
8 Melody 4
RCV VOL. SMALL
9 Melody 5
4:26 PM TUE 13 APR 2004
10 Melody 6
Press Feature and 2 key to alternate between
Large and Small volume.
RCV VOL. LARGE
4:26 PM TUE 13 APR 2004
TO SELECT RINGER TONE DT300 Series
DT Series has 10 kinds of ringer tones that you can
select.
Note: Tone number 5, 6, 8~10 (Melody 1, 2, 4~6) will
sound continuously.
TO ADJUST TRANSMISSION/RECEIV-
ING VOLUME DT300 Series
Handset volume can be changed.
Press Feature and 4 key. The LCD displays the
current volume.
T/R VOL. SMALL
4:26 PM TUE 13 APR 2004
Press Feature and 4 key again to alternate
between Small and Large volume.
T/R VOL. LARGE
4:26 PM TUE 13 APR 2004
TO ACTIVATE HANDS-FREE DT300 Series
To set hands-free on:
Press Feature and 5 key. The LCD displays:
HANDS FREE ON
4:26 PM TUE 13 APR 2004
To Set Hands-Free Off:
Press Feature and 6 key. The LCD displays:
HANDS FREE OFF
4:26 PM TUE 13 APR 2004
CALL INDICATOR LAMP ON/OFF
DT300 Series
The user can choose to turn the call indicator lamp
either on or off during ringing.
Press Feature and 7 key. The LCD displays:
INDICATOR ON
4:26 PM TUE 13 APR 2004
INDICATOR OFF
4:26 PM TUE 13 APR 2004
Note:
The call indicator lamp lights when used as a
Message Waiting Lamp, even when it is turned
off by the above operation.
DYNAMIC DIAL PAD ON/OFF
DT300 Series
The user can originate a call at first hand without lifting
handset or pressing Speaker key.
Press Feature and 8 key. The LCD displays:
Direct Dial Pad ON
4:26 PM TUE 13 APR 2004
Direct Dial Pad OFF
4:26 PM TUE 13 APR 2004
Note: When this feature is ON, the user may initiate a
call by immediately dialing the number and the
station will go hands-free off-hook automatically.
Please note when the features on the following
pages are used in conjunction with Dynamic Dial
Pad, that the user does not have to press the
Speaker key or lift the handset to receive dial
tone.
SETUP WITH MENU KEY FOR
DT300 SERIES
TO CHANGE RINGER TONE VOLUME
DT300
The procedure below shows how to change the volume
of ringer tone.
While indicating the current time on LCD, press
Menu key to open the Menu screen.
Select 3 Setting and then press (Enter),
(Right-cursor) or OK soft key. (or press 3 key.)
[Menu]
1 Call History
2 Directory
3 Settings
Back OK
Select 1 Ring Volume and then press
(Enter), (Right-cursor) or OK soft key. (or
press 1 key.)
[Settings]
1 Ring Volume
2 Offhook Ring
3 Back Light
4 Headset Ring
5 Peripherals
Back OK
Ring Volume can be set in 13 levels (0 - 12). Adjust
the ringer tone volume by using key and then
press (Enter) or OK soft key.
Turn the volume up.
Turn the volume down.
[Ring Volume]
[ ]
Back OK
TO ENABLE/DISABLE OFF-HOOK
RINGING DT300
The procedure below shows how to
While indicating the current time on LCD, press
Menu key to open the Menu screen.
Select 3 Setting and then press (Enter),
(Right-cursor) or OK soft key. (or press 3 key.)
[Menu]
1 Call History
2 Directory
3 Settings
Back OK
Select 2 Offhook Ring and then press
(Enter), (Right-cursor) or OK soft key. (or
press 2 key.)
[Settings]
1 Ring Volume
2 Offhook Ring
3 Back Light
4 Headset Ring
5 Peripherals
Back OK
To disable/enable the off-hook ringing, select
1 Disable or 2 Enable. Then, press (Enter)
or OK soft key.
[Offhook Ring]
1 Disable
2 Enable
Back OK
Note: Default setting is 2 Enable.
Note: The currently enabled item is highlighted.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

NEC DTL-8LD-1 Manuale utente

Tipo
Manuale utente
Questo manuale è adatto anche per

in altre lingue

Documenti correlati