UC232B USB to RJ-45 (RS-232) Console Adapter Adaptador de consola UC232B USB a RJ-45 (RS-232)
Adaptateur USB vers Console RJ-45 (RS-232) UC232B Adattatore console USB - RJ-45 (RS-232) UC232B
USB-zu-RJ-45 (RS-232)-Konsolenadapter UC232B UC232B Консольный адаптер USB - RJ-45 (RS-232)
www.aten.com www.aten.com
www.aten.com www.aten.com
www.aten.com www.aten.com
A
Hardware Review
Top View
1
RJ-45 Connector (Female)
2
Power LED
3
USB Connector
B
Hardware Installation
To install the UC232B, do the following:
1
Connect the USB plug to the computer and allow the drivers to install.*
Note: If you are using an older computer that doesn’t contain the drivers
for this device, please go to our website to download the UC232B
drivers and install them before setting up the hardware.
2
Plug a Straight-through Ethernet cable to the RJ-45 connector on the
UC232B.
3
Plug the other end of the Ethernet cable directly into an RJ-45 console port of
the target networking device
4
Use an Rolled Ethernet cable and RJ-45 to DB-9 adapter (optional) while
connecting the standard DB-9 serial port on the target serial device.
Note: The Ethernet cable’s length can be up to 15 meters and will provide
speeds up to 921.6 Kbps.
5
Power on the target device.
A
Hardware Review
© Copyright 2017 ATEN
®
International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
This product is RoHS compliant.
Part No. PAPE-1223-K70G Printing Date: 11/2017
USB to RJ-45 (RS-232) Console Adapter
Quick Start Guide
UC232B
Package Contents
1 USB to RS-232 Console Adapter
1 User Instructions
B
Hardware Installation
1
2
3
1
2 3
Up to 15 meters
@ 921 Kbps
RJ45 to DB-9
1
2 4
Straight-through Ethernet Cable Pin-
outs
Signal RJ-45 Pin RJ-45 Pin Signal
Tx+ 1 1 Tx+
Tx– 2 2 Tx–
Rx+ 3 3 Rx+
– 4 4 –
– 5 5 –
Rx– 6 6 Rx–
– 7 7 –
– 8 8 –
Rolled Ethernet Cable Pin-outs
Signal RJ-45 Pin RJ-45 Pin Signal
– 1 8 –
– 2 7 –
– 3 6 –
– 4 5 –
– 5 4 –
– 6 3 –
– 7 2 –
– 8 1 –
ATEN UC232B Console/Aux Cable Mode
Console / Aux Port
(DTE)
UC232B
RJ-45 Port
Signal
Type 1
Signal
Type 2
RJ-45
Pin
Straight
Cable Pin
Signal
- RTS 1 1 CTS
DTR DTR 2 2 DSR
TxD TxD 3 3 RxD
GND GND 4 4 GND
GND GND 5 5 GND
RxD RxD 6 6 TxD
DSR DSR 7 7 DTR
- CTS 8 8 RTS
ATEN RS232 Serial Cable Mode
3rd Party RJ45 to
RS232 Adapter
UC232B
RJ-45 Port
Signal
DB9
Out
Signal
RJ-45
Pin
Rolled
Cable Pin
Signal
RTS 7 CTS 8 1 CTS
DTR 4 DSR 7 2 DSR
TxD 3 RxD 6 3 RxD
GND 5 GND 5 4 GND
GND 5 GND 4 5 GND
RxD 2 TxD 3 6 TxD
DSR 6 DTR 2 7 DTR
CTS 8 RTS 1 8 RTS
Cable Requirements
Support and Documentation Notice
All information, documentation, fi rmware, software utilities, and
specifi cations contained in this package are subject to change without
prior notifi cation bythe manufacturer.
To reduce the environmental impact of our products, ATEN
documentation and software can be found online at
http://www.aten.com/download/
Technical Support
www.aten.com/support
이 기기는 가정용(B급) 전자파적합기기로서 주로 가정에서 사용하는 것을 목적
으로 하며, 모든 지역에서 사용할 수 있습니다.
EMC Information
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT:
This equipment has been tested and found to comply with
the limits for a Class B digital service, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. Any changes or modifi cations made to this
equipment may void the user s authority to operate this
equipment. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna;
- Increase the separation between the equipment and receiver;
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected;
- Consult the dealer/an experienced radio/television technician for help.
FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Scan for
more information
A
Hardwareübersicht
Ansicht von oben
1
RJ-45-Anschluss (Buchse)
2
Betriebsanzeige-LED
3
USB-Anschluss
B
Hardwareinstallation
Gehen Sie zur Installation des UC232B wie folgt vor:
1
Verbinden Sie den USB-Stecker mit dem Computer und erlauben Sie die
Installation der Treiber.*
Hinweis: Falls Sie einen älteren Computer benutzen, der keine Treiber für
dieses Gerät enthält, rufen Sie bitte unsere Webseite auf, laden
Sie die UC232B-Treiber herunter und installieren Sie diese, bevor
Sie die Hardware einrichten.
2
Schließen Sie ein Straight-Through-Ethernet-Kabel an den RJ-45-Anschluss am
UC232B an.
3
Verbinden Sie das andere Ende des Ethernet-Kabels direkt mit dem RJ-45-
Konsolenanschluss des Zielnetzwerkgerätes.
4
Verwenden Sie beim Anschließen des herkömmlichen seriellen DB-9-
Anschlusses am seriellen Zielgerät ein gerolltes Ethernet-Kabel und einen
RJ-45-zu-DB-9-Adapter (optional).
Hinweis: Die Länge des Ethernet-Kabels kann bis zu 15 Meter betragen und
bietet Geschwindigkeiten bis 921,6 kb/s.
5
Schalten Sie das Zielgerät ein.
A
Revisión de hardware
Vista superior
1
Conector RJ-45 (hembra)
2
LED de alimentación
3
Conector USB
B
Instalación de hardware
Para instalar el UC232B, haga lo siguiente:
1
Enchufe el conector USB al PC y permita que los controladores se instalen.*
Nota: Si está utilizando un PC antiguo que no contiene los controladores
para este dispositivo, visite nuestro sitio web para descargar los
controladores UC232B e instalarlos antes de confi gurar el hardware.
2
Conecte un cable Ethernet directo al conector RJ-45 en el UC232B.
3
Conecte el otro extremo del cable Ethernet directamente en un puerto de
consola RJ-45 del dispositivo de red de destino.
4
Utilice un cable Ethernet enrollado y un adaptador RJ-45 a DB-9 (opcional)
cuando conecte el puerto serie DB-9 estándar en el dispositivo serie de
destino.
Nota: La longitud del cable Ethernet puede ser de hasta 15 metros y
proporcionará velocidades de hasta 921,6 Kbps.
5
Encienda el dispositivo de destino.
A
Descrizione hardware
Vista dall'alto
1
Connettore RJ-45 (femmina)
2
LED alimentazione
3
Connettore USB
B
Installazione dell'hardware
Per installare l'UC232B, agire come segue:
1
Collegare la spina USB al computer e consentire l'installazione dei driver.*
Nota: Se si utilizza un computer meno recente che non contiene i driver
per questo dispositivo, visitare il nostro sito web per scaricare i driver
dell'UC232B e installarli prima di confi gurarer l'hardware.
2
Inserire un cavo Ethernet diritto nel connettore RJ-45 dell'UC232B.
3
Inserire l'altra estremità del cavo Ethernet direttamente in una porta della
console RJ-45 del dispositivo di rete target.
4
Utilizzare un cavo Ethernet avvolto e un adattatore RJ-45 - DB-9 (opzionale)
durante il collegamento della porta seriale DB-9 standard sul dispositivo seriale
target.
Nota: Il cavo Ethernet può essere lungo fi no a 15 metri e fornisce velocità fi no
a 921,6 Kbps.
5
Accendere il dispositivo target.
A
Обзор аппаратного обеспечения
Вид сверху
1
Разъем RJ-45 (гнездовой)
2
Индикатор питания
3
Разъем USB
B
Установка аппаратного обеспечения
Для установки UC232B выполните следующие действия.
1
Подключите вилку USB к компьютеру и подождите, пока завершится
установка драйверов.*
Примечание. Если используется компьютер старой модели,
на котором отсутствуют драйверы для данного
устройства, зайдите на веб-сайт компании, загрузите
драйверы UC232B и установите их перед установкой
аппаратного обеспечения.
2
Подключите обычный кабель Ethernet к разъему RJ-45 на UC232B.
3
Подключите другой конец кабеля Ethernet прямо к консольному порту
RJ-45 на целевом сетевом устройстве.
4
При подключении к обычному последовательному порту DB-9 на
целевом последовательном устройстве рекомендуется использовать
самоскручивающийся кабель Ethernet и адаптер RJ-45 - DB-9
(приобретаемый отдельно).
Примечание. Длина кабеля Ethernet достигает 15 метров и
обеспечивает скорость передачи до 921,6 кбит/с.
5
Включите питание целевого устройства.
A
Aperçu du matériel
Vue de dessus
1
Connecteur RJ-45 (Femelle)
2
LED d'alimentation
3
Connecteur USB
B
Installation du matériel
Pour installer l'UC232B, procédez comme suit :
1
Connectez la prise USB à l'ordinateur et laissez les pilotes s'installer.*
Remarque : Si vous utilisez un ordinateur plus ancien qui ne contient pas
les pilotes pour cet appareil, veuillez vous rendre sur notre site
Web pour télécharger les pilotes UC232B et les installer avant
de confi gurer le matériel.
2
Raccordez un câble Ethernet droit au connecteur RJ-45 sur le UC232B.
3
Branchez l'autre extrémité du câble Ethernet directement sur le port console
RJ-45 du périphérique réseau cible.
4
Utilisez un câble Ethernet enroulé et un adaptateur RJ-45 vers DB-9 (facultatif)
en raccordant le port série DB-9 standard sur le périphérique série cible.
Remarque : La longueur du câble Ethernet peut atteindre 15 mètres et le
débit peut atteindre 921,6 Kbits/s.
5
Mettez sous tension l’appareil cible.
La pagina sta caricando ...
-
1
-
2
in altre lingue
- English: ATEN UC232B Quick start guide
- français: ATEN UC232B Guide de démarrage rapide
- español: ATEN UC232B Guía de inicio rápido
- русский: ATEN UC232B Инструкция по началу работы
- português: ATEN UC232B Guia rápido