CHAUVET DJ Intimidator Spot Duo 155 Guida di riferimento

Quick Reference Guide

Intimidator Spot Duo 155 QRG EN

2

About This

Guide

The Intimidator Spot Duo 155 Quick Reference Guide (QRG) has basic

product information such as mounting, menu options, and DMX values.

Download the User Manual from www.chauvetlighting.com for more details.

Disclaimer

The information and specifications contained in this QRG are subject to

change without notice.

Safety Notes

These Safety Notes include important safety information about installation,

use, and maintenance.

• This product is not intended for permanent installation.

• ONLY connect this product to a grounded and protected circuit.

• Always disconnect from power before cleaning or replacing the fuse.

• DO NOT look at the light source when the product is on.

• Make sure the power cord is not crimped or damaged.

• Never disconnect this product from power by pulling on the cord.

• When mounting this product overhead, use a safety cable.

• DO NOT allow flammable materials close to the unit while operating.

• DO NOT touch this product when it is operating because it may be hot.

• The voltage of the outlet to which you are connecting this product must

be within the range stated on the decal or rear panel of the product.

• This product is for indoor use only! (IP20) To prevent risk of fire or

shock, do not expose this product to rain or moisture.

• Always mount this product in a location with adequate ventilation, at

least 20 in (50 cm) from adjacent surfaces.

• Be sure that no ventilation slots on the unit’s housing are blocked.

• Never connect this product to a dimmer or rheostat.

• Replace the fuse with one of the same type and rating.

• ONLY use the hanging/mounting bracket or base to carry this product.

• The maximum ambient temperature is 104 °F (40 °C). Do not operate

this product at higher temperatures.

• In the event of a serious operating problem, stop using immediately.

• DO NOT open this product. It contains no user-serviceable parts.

• To eliminate unnecessary wear and improve its lifespan, during periods

of non-use completely disconnect the product from power via breaker

or by unplugging it.

Contact

• From outside the U.S., UK, Ireland, Mexico, or Benelux, contact the

distributor of record to request support or return a product.

• From inside the U.S., UK, Ireland, Mexico, or Benelux, use the

information in Contact Us at the end of this QRG.

Intimidator Spot Duo 155 QRG EN

3

What Is

Included

• Intimidator Spot Duo 155

• Hanging Bracket with

Mounting Hardware

• Power Cord

• Warranty Card

• Quick Reference Guide

To Begin

Unpack your Intimidator Spot Duo 155 and make sure you have received all parts

in good condition. If the box or contents appear damaged, notify the carrier

immediately, not Chauvet.

Description

The Intimidator Spot Duo 155 has two Intimidator Spot 155 moving heads pre-

mounted on a single bar. Control options include automated programs, Sound-

Active modes, and DMX. Pan and tilt functions are available for each moving

head. Lighting options include separate color and gobo wheels, as well as multiple

built-in Master/Slave programs.

Overview

AC Power

This product has an auto-ranging power supply that can work with an input

voltage range of 100 to 240 VAC, 50/60 Hz.

To eliminate wear and improve its lifespan, during periods of non-

use

completely disconnect from power via breaker or by unplugging it.

Power Linking

For the maximum number of Intimidator Spot Duo 155 that can be

power linked at 120 V or at 240 V, see the User Manual or the label on the

product.

Back Panel View

Power In

Fuse

Holder

Digital Display

Menu

Buttons

DMX

In/Out

Front Panel View

Power Out

Safety

Loop

Tripod Adjustment

Knob

Cooling Fan

Microphone

Moving

Yokes

Focusing

Lenses

Intimidator Spot Duo 155 QRG EN

4

Fuse

Replacement

1. Disconnect the product from power.

2. Wedge the tip of a flat-head screwdriver, loosen the fuse holder and pull

straight out.

3. Remove the blown fuse from the safety cap and replace with a fuse of the

exact same type and rating.

4. Re-insert the fuse holder.

5. Reconnect the product to power.

Mounting

Before mounting this product, read the Safety Notes.

Mounting

Diagram

When using only one mounting clamp with this fixture, you must use a

clamp with a captive bolt to prevent accidental loosening.

Control Panel

Description

Button

Function

<MENU>

Exits from the current menu or function

<UP>

Navigates upwards through the menu list and increases the

numeric value when in a function

<DOWN>

Navigates downwards through the menu list and decreases

the numeric value when in a function

<ENTER>

Enables the currently displayed menu or sets the currently

selected value into the selected function

Tripod Insertion

Hanging Bracket

Rubber Feet

Mounting Clamp

Safety Cable

Intimidator Spot Duo 155 QRG EN

5

Menu Options

Mode

Programming Levels

Description

DMX Address

d___

d001–d512

Sets the DMX starting address

Automatic

A-__

A-01–A-16

Automatic mode

Sound-Active

Srun

Sound-Active mode

Slave Son_

Son1

Slave operating mode 2

Son2

Slave operating mode 1

Sound Sensitivity

S-__

S-01–S-99

Sound sensitivity control

Master Auto M--_

M--2

Master built-in 4-head program

M--4

Master built-in 2-head program

Pan 1 _PA1

PA1

Normal pan operation for head 1

rPA1

Reverse pan operation for head 1

Pan 2 _PA2

PA2

Normal pan operation for head 2

rPA2

Reverse pan operation for head 2

Tilt 1 _til

til

Normal tilt operation for head 1

rtil

Reverse tilt operation for head 1

Tilt 2 _ti2

ti2

Normal tilt operation for head 2

rti2

Reverse tilt operation for head 2

Display _dis

dis

Normal display

rdis

Inverted display

Channel Mode __CH

20CH

20-channel DMX personality

17CH

17-channel DMX personality

10CH

10-channel DMX personality

Pan Range PA__

PA36

360° pan range

PA18

180° pan range

Tilt Range ti__

ti27

270° tilt range

ti18

180° tilt range

ti 9

90° tilt range

Head 1 Temperature

t--1

1t__

Displays current head 1 temperature

Head 2 Temperature

t--2

2t__

Displays current head 2 temperature

Reset

rESt

Resets product

Load

LoAd

Loads factory defaults

DMX Linking

The Intimidator Spot Duo 155 can work with a DMX controller when linked by

DMX serial connections. Instructions for connecting and configuring this

product for DMX operation are in the User Manual. If you are not familiar with

DMX, download the DMX Primer from www.chauvetlighting.com.

Starting

Address

To ensure full access to all channels in each DMX mode, the highest

recommended DMX address is 493.

Master/Slave

Connection

The Intimidator Spot Duo 155 uses the DMX data connection for its

Master/Slave mode. Instructions for connecting and configuring this product

for Master/Slave operation are in the User Manual.

Intimidator Spot Duo 155 QRG EN

6

Master Auto

Programs

The Master Auto built-in programs control the actions of two Intimidator Spot

Duo 155

units linked together by DMX data connection. A single Intimidator

Spot Duo 155

(the master) controls the actions of another Intimidator Spot Duo

155 (the slave). Configu

re the Master Auto programs in conjunction with the

Slave modes as follows:

Master Auto

4-

Head

Program

The Master Auto 4-Head program allows all 4 heads of two linked Intimidator Spot

Duo 155 units to operate in unison. The master unit will be set to operate in

Auto

mode with the M--4 setting, while the slave unit will be set to operate in either

Son1

or Son2 mode.

Configure the units as indicated below.

Master unit:

1. Press <MENU> repeatedly until M--2 or M--4 shows on the display.

2. Press <UP> or <DOWN> to select M--4.

3. Press <ENTER>.

4. Set the master to run in Auto mode, A-01–A-16.

Slave unit:

1. Press <MENU> repeatedly until Son1 or Son2 shows on the display.

2. Press <UP> or <DOWN> to select Son1 or Son2.

• Select Son1 for 100% synchronized actions.

• Select Son2 for a delayed show with all 4 heads in the same direction.

3. Press <ENTER>.

Master Auto

2-

Head

Program

The Master Auto 2-Head program allows a single Intimidator Spot Duo 155 to

control the actions of another Intimidator Spot Duo 155

. The master unit will be set

to operate in Auto mode with the M--2 setting

, while the slave unit will be set to

operate in either Son1 or Son2 mode.

Configure the units as indicated below.

Master unit:

1. Press <MENU> repeatedly until M--2 or M--4 shows on the display.

2. Press <UP> or <DOWN> to select M--2.

3. Press <ENTER>.

4. Set the master to run in Auto mode, A-01–A-16.

Slave unit:

1. Press <MENU> repeatedly until Son1 or Son2 shows on the display.

2. Press <UP> or <DOWN> to select Son1 or Son2.

• Select Son1 for 100% synchronized actions.

• Select Son2 for the same show with both units, but the actions of the

slave are in the opposite direction of the actions of the master.

3. Press <ENTER>.

Intimidator Spot Duo 155 QRG EN

7

DMX Values

20CH

Channel

Function

Value

Percent/Setting

1

Pan 1

000 ó 255

Pan 0–360° for head 1

2

Fine Pan 1

000 ó 255

Fine panning control for head 1

3

Tilt 1

000 ó 255

Tilt 0–270° for head 1

4

Fine Tilt 1

000 ó 255

Fine tilting control for head 1

5

Pan 2

000 ó 255

Pan 0–360° for head 2

6

Fine Pan 2

000 ó 255

Fine panning control for head 2

7

Tilt 2

000 ó 255

Tilt 0–270° for head 2

8

Fine Tilt 2

000 ó 255

Fine tilting control for head 2

9

Speed

000 ó 255

Pan/Tilt speed (fast to slow)

10

Color Wheel 1

(Head 1)

000 ó 005

White

006 ó 011

Yellow

012 ó 017

Magenta

018 ó 023

Green

024 ó 029

Red

030 ó 035

Cyan

036 ó 041

Orange

042 ó 047

Blue

048 ó 053

Light Green

054 ó 063

Amber

064 ó 069

White + Yellow

070 ó 075

Yellow + Magenta

076 ó 081

Magenta + Green

082 ó 087

Green + Red

088 ó 093

Red + Cyan

094 ó 099

Cyan + Orange

100 ó 105

Orange + Blue

106 ó 111

Blue + Light Green

112 ó 117

Light Green + Amber

118 ó 127

Amber + White

128 ó 191

Rainbow effect with increasing speed

192 ó 255

Reverse rainbow effect with increasing speed

Intimidator Spot Duo 155 QRG EN

8

20CH

(cont.)

Channel

Function

Value

Percent/Setting

11

Color Wheel 2

(Head 2)

000 ó 005

White

006 ó 011

Yellow

012 ó 017

Magenta

018 ó 023

Green

024 ó 029

Red

030 ó 035

Cyan

036 ó 041

Orange

042 ó 047

Blue

048 ó 053

Light Green

054 ó 063

Amber

064 ó 069

White + Yellow

070 ó 075

Yellow + Magenta

076 ó 081

Magenta + Green

082 ó 087

Green + Red

088 ó 093

Red + Cyan

094 ó 099

Cyan + Orange

100 ó 105

Orange + Blue

106 ó 111

Blue + Light Green

112 ó 117

Light Green + Amber

118 ó 127

Amber + White

128 ó 191

Rainbow effect with increasing speed

192 ó 255

Reverse rainbow effect with increasing speed

12

Gobo Wheel 1

(Head 1)

064 ó 073

Gobo 9 shake with increasing speed

074 ó 079

Gobo 8 shake with increasing speed

080 ó 085

Gobo 7 shake with increasing speed

086 ó 091

Gobo 6 shake with increasing speed

092 ó 097

Gobo 5 shake with increasing speed

098 ó 103

Gobo 4 shake with increasing speed

104 ó 109

Gobo 3 shake with increasing speed

110 ó 115

Gobo 2 shake with increasing speed

116 ó 121

Gobo 1 shake with increasing speed

122 ó 127

Open

128 ó 191

Cycle effect with increasing speed

192 ó 255

Reverse cycle effect with increasing speed

Intimidator Spot Duo 155 QRG EN

9

20CH

(cont.)

Channel

Function

Value

Percent/Setting

13

Gobo Wheel 2

(Head 2)

064 ó 073

Gobo 9 shake with increasing speed

074 ó 079

Gobo 8 shake with increasing speed

080 ó 085

Gobo 7 shake with increasing speed

086 ó 091

Gobo 6 shake with increasing speed

092 ó 097

Gobo 5 shake with increasing speed

098 ó 103

Gobo 4 shake with increasing speed

104 ó 109

Gobo 3 shake with increasing speed

110 ó 115

Gobo 2 shake with increasing speed

116 ó 121

Gobo 1 shake with increasing speed

122 ó 127

Open

128 ó 191

Cycle effect with increasing speed

192 ó 255

Reverse cycle effect with increasing speed

14

Dimmer 1

000 ó 255

Dimmer for head 1 (0–100%)

15

Dimmer 2

000 ó 255

Dimmer for head 2 (0–100%)

16

Shutter 1

(Head 1)

000 ó 003

Light off

004 ó 007

Light on

008 ó 076

Shutter with increasing speed

077 ó 145

Pulse strobe with increasing speed

146 ó 215

Random strobe with increasing speed

216 ó 255

Light on

17

Shutter 2

(Head 2)

000 ó 003

Light off

004 ó 007

Light on

008 ó 076

Shutter with increasing speed

077 ó 145

Pulse strobe with increasing speed

146 ó 215

Random strobe with increasing speed

216 ó 255

Light on

Intimidator Spot Duo 155 QRG EN

10

20CH

(cont.)

Channel

Function

Value

Percent/Setting

18 Control Functions

000 ó 009

No function

010 ó 014

Pan/Tilt blackout

015 ó 019

Color blackout

020 ó 024

Gobo blackout

025 ó 029

Pan/Tilt/Color blackout

030 ó 034

Pan/Tilt/Gobo blackout

035 ó 039

Color/Gobo blackout

040 ó 044

Pan/Tilt/Color/Gobo blackout

045 ó 049

No function

050 ó 054

First two heads setting

055 ó 059

Latter two heads setting

060 ó 064

Cancel four heads

065 ó 069

No function

070 ó 074

Reset

075 ó 079

No function

080 ó 084

Reverse pan/tilt for both heads

085 ó 089

Reverse pan for head 1

090 ó 094

Reverse pan for head 2

095 ó 099

Reverse tilt for head 1

100 ó 104

Reverse tilt for head 2

105 ó 109

Cancel reverse pan for head 1

110 ó 114

Cancel reverse pan for head 2

115 ó 119

Cancel reverse tilt for head 1

120 ó 124

Cancel reverse tilt for head 2

125 ó 129

Cancel reverse pan/tilt for both heads

130 ó 135

No function

136 ó 175

Strobe pattern 1 with

increasing speed

When

Channel 19

is active

176 ó 215

Strobe pattern 2 with

increasing speed

216 ó 255

Strobe pattern 3 with

increasing speed

Intimidator Spot Duo 155 QRG EN

11

20CH

(cont.)

Channel

Function

Value

Percent/Setting

19 Movement Macros

000 ó 007

No function

008 ó 022

Movement macro 1

023 ó 037

Movement macro 2

038 ó 052

Movement macro 3

053 ó 067

Movement macro 4

068 ó 082

Movement macro 5

083 ó 097

Movement macro 6

098 ó 112

Movement macro 7

113 ó 127

Movement macro 8

128 ó 142

Movement macro 9

143 ó 157

Movement macro 10

158 ó 172

Movement macro 11

173 ó 187

Movement macro 12

188 ó 202

Movement macro 13

203 ó 217

Movement macro 14

218 ó 232

Movement macro 15

233 ó 247

All movement macros 1–15

248 ó 255

Sound-Active Mode

20

Movement Macro

Speed

000 ó 255 Fast to slow

Intimidator Spot Duo 155 QRG EN

12

17CH

Channel

Function

Value

Percent/Setting

1

Pan 1

000 ó 255

Pan 0–360° for head 1

2

Fine Pan 1

000 ó 255

Fine panning control for head 1

3

Tilt 1

000 ó 255

Tilt 0–270° for head 1

4

Fine Tilt 1

000 ó 255

Fine tilting control for head 1

5

Pan 2

000 ó 255

Pan 0–360° for head 2

6

Fine Pan 2

000 ó 255

Fine panning control for head 2

7

Tilt 2

000 ó 255

Tilt 0–270° for head 2

8

Fine Tilt 2

000 ó 255

Fine tilting control for head 2

9

Speed

000 ó 255

Pan/Tilt speed (fast to slow)

10

Color Wheel

(Both Heads)

000 ó 005

White

006 ó 011

Yellow

012 ó 017

Magenta

018 ó 023

Green

024 ó 029

Red

030 ó 035

Cyan

036 ó 041

Orange

042 ó 047

Blue

048 ó 053

Light Green

054 ó 063

Amber

064 ó 069

White + Yellow

070 ó 075

Yellow + Magenta

076 ó 081

Magenta + Green

082 ó 087

Green + Red

088 ó 093

Red + Cyan

094 ó 099

Cyan + Orange

100 ó 105

Orange + Blue

106 ó 111

Blue + Light Green

112 ó 117

Light Green + Amber

118 ó 127

Amber + White

128 ó 191

Rainbow effect with increasing speed

192 ó 255

Reverse rainbow effect with increasing speed

Intimidator Spot Duo 155 QRG EN

13

17CH

(cont.)

Channel

Function

Value

Percent/Setting

11

Gobo Wheel

(Both Heads)

064 ó 073

Gobo 9 shake with increasing speed

074 ó 079

Gobo 8 shake with increasing speed

080 ó 085

Gobo 7 shake with increasing speed

086 ó 091

Gobo 6 shake with increasing speed

092 ó 097

Gobo 5 shake with increasing speed

098 ó 103

Gobo 4 shake with increasing speed

104 ó 109

Gobo 3 shake with increasing speed

110 ó 115

Gobo 2 shake with increasing speed

116 ó 121

Gobo 1 shake with increasing speed

122 ó 127

Open

128 ó 191

Cycle effect with increasing speed

192 ó 255

Reverse cycle effect with increasing speed

12

Dimmer 1

000 ó 255

Dimmer for head 1 (0–100%)

13

Dimmer 2

000 ó 255

Dimmer for head 2 (0–100%)

14

Shutter

(Both Heads)

000 ó 003

Light off

004 ó 007

Light on

008 ó 076

Shutter with increasing speed

077 ó 145

Pulse strobe with increasing speed

146 ó 215

Random strobe with increasing speed

216 ó 255

Light on

15

Control Functions

000 ó 009

No function

010 ó 014

Pan/Tilt blackout

015 ó 019

Color blackout

020 ó 024

Gobo blackout

025 ó 029

Pan/Tilt/Color blackout

030 ó 034

Pan/Tilt/Gobo blackout

035 ó 039

Color/Gobo blackout

040 ó 044

Pan/Tilt/Color/Gobo blackout

045 ó 049

No function

050 ó 054

First two heads setting

055 ó 059

Latter two heads setting

060 ó 064

Cancel four heads

065 ó 069

No function

070 ó 074

Reset

075 ó 079

No function

080 ó 084

Reverse pan/tilt for both heads

Intimidator Spot Duo 155 QRG EN

14

17CH

(cont.)

Channel

Function

Value

Percent/Setting

15

(cont.)

Control Functions

(cont.)

085 ó 089

Reverse pan for head 1

090 ó 094

Reverse pan for head 2

095 ó 099

Reverse tilt for head 1

100 ó 104

Reverse tilt for head 2

105 ó 109

Cancel reverse pan for head 1

110 ó 114

Cancel reverse pan for head 2

115 ó 119

Cancel reverse tilt for head 1

120 ó 124

Cancel reverse tilt for head 2

125 ó 129

Cancel reverse pan/tilt for both heads

130 ó 135

No function

136 ó 175

Strobe pattern 1 with

increasing speed

When

Channel 16

is active

176 ó 215

Strobe pattern 2 with

increasing speed

216 ó 255

Strobe pattern 3 with

increasing speed

16

Movement Macros

000 ó 007

No function

008 ó 022

Movement macro 1

023 ó 037

Movement macro 2

038 ó 052

Movement macro 3

053 ó 067

Movement macro 4

068 ó 082

Movement macro 5

083 ó 097

Movement macro 6

098 ó 112

Movement macro 7

113 ó 127

Movement macro 8

128 ó 142

Movement macro 9

143 ó 157

Movement macro 10

158 ó 172

Movement macro 11

173 ó 187

Movement macro 12

188 ó 202

Movement macro 13

203 ó 217

Movement macro 14

218 ó 232

Movement macro 15

233 ó 247

All movement macros 1–15

248 ó 255

Sound-Active Mode

17

Movement Macro

Speed

000 ó 255 Fast to slow

Intimidator Spot Duo 155 QRG EN

15

10CH

Channel

Function

Value

Percent/Setting

1

Pan

000 ó 255

Pan 0–360° for both heads

2

Tilt

000 ó 255

Tilt 0–270° for both heads

3

Color Wheel

(Both Heads)

000 ó 005

White

006 ó 011

Yellow

012 ó 017

Magenta

018 ó 023

Green

024 ó 029

Red

030 ó 035

Cyan

036 ó 041

Orange

042 ó 047

Blue

048 ó 053

Light Green

054 ó 063

Amber

064 ó 069

White + Yellow

070 ó 075

Yellow + Magenta

076 ó 081

Magenta + Green

082 ó 087

Green + Red

088 ó 093

Red + Cyan

094 ó 099

Cyan + Orange

100 ó 105

Orange + Blue

106 ó 111

Blue + Light Green

112 ó 117

Light Green + Amber

118 ó 127

Amber + White

128 ó 191

Rainbow effect with increasing speed

192 ó 255

Reverse rainbow effect with increasing speed

4

Gobo Wheel

(Both Heads)

064 ó 073

Gobo 9 shake with increasing speed

074 ó 079

Gobo 8 shake with increasing speed

080 ó 085

Gobo 7 shake with increasing speed

086 ó 091

Gobo 6 shake with increasing speed

092 ó 097

Gobo 5 shake with increasing speed

098 ó 103

Gobo 4 shake with increasing speed

104 ó 109

Gobo 3 shake with increasing speed

110 ó 115

Gobo 2 shake with increasing speed

116 ó 121

Gobo 1 shake with increasing speed

122 ó 127

Open

128 ó 191

Cycle effect with increasing speed

192 ó 255

Reverse cycle effect with increasing speed

Intimidator Spot Duo 155 QRG EN

16

10CH

(cont.)

Channel

Function

Value

Percent/Setting

5

Dimmer 1

000 ó 255

Dimmer for head 1 (0–100%)

6

Dimmer 2

000 ó 255

Dimmer for head 2 (0–100%)

7

Shutter

(Both Heads)

000 ó 003

Light off

004 ó 007

Light on

008 ó 076

Shutter with increasing speed

077 ó 145

Pulse strobe with increasing speed

146 ó 215

Random strobe with increasing speed

216 ó 255

Light on

8 Control Functions

000 ó 009

No function

010 ó 014

Pan/Tilt blackout

015 ó 019

Color blackout

020 ó 024

Gobo blackout

025 ó 029

Pan/Tilt/Color blackout

030 ó 034

Pan/Tilt/Gobo blackout

035 ó 039

Color/Gobo blackout

040 ó 044

Pan/Tilt/Color/Gobo blackout

045 ó 049

No function

050 ó 054

First two heads setting

055 ó 059

Latter two heads setting

060 ó 064

Cancel four heads

065 ó 069

No function

070 ó 074

Reset

075 ó 079

No function

080 ó 084

Reverse pan/tilt for both heads

085 ó 089

Reverse pan for head 1

090 ó 094

Reverse pan for head 2

095 ó 099

Reverse tilt for head 1

100 ó 104

Reverse tilt for head 2

105 ó 109

Cancel reverse pan for head 1

110 ó 114

Cancel reverse pan for head 2

115 ó 119

Cancel reverse tilt for head 1

120 ó 124

Cancel reverse tilt for head 2

125 ó 129

Cancel reverse pan/tilt for both heads

130 ó 135

No function

136 ó 175

Strobe pattern 1 with

increasing speed

When Channel 9

is active

176 ó 215

Strobe pattern 2 with

increasing speed

216 ó 255

Strobe pattern 3 with

increasing speed

Intimidator Spot Duo 155 QRG EN

17

10CH

(cont.)

Channel

Function

Value

Percent/Setting

9 Movement Macros

000 ó 007

No function

008 ó 022

Movement macro 1

023 ó 037

Movement macro 2

038 ó 052

Movement macro 3

053 ó 067

Movement macro 4

068 ó 082

Movement macro 5

083 ó 097

Movement macro 6

098 ó 112

Movement macro 7

113 ó 127

Movement macro 8

128 ó 142

Movement macro 9

143 ó 157

Movement macro 10

158 ó 172

Movement macro 11

173 ó 187

Movement macro 12

188 ó 202

Movement macro 13

203 ó 217

Movement macro 14

218 ó 232

Movement macro 15

233 ó 247

All movement macros 1–15

248 ó 255

Sound-Active Mode

10

Movement Macro

Speed

000 ó 255 Fast to slow

Intimidator Spot Duo 155 GRR ES

18

Acerca de

esta Guía

La Guía de Referencia Rápida (GRR) del Intimidator Spot Duo

155 c

ontiene información básica sobre el producto, como montaje, opciones de menú y

asignaciones DMX. Para más información, descargue el manual de usuario del sitio web

de Chauvet http://www.chauvetlighting.com/product-manuals-literature/.

Exención de

Responsabilidad

La información y especificaciones contenidas en esta GRR están sujetas a

cambio sin anteriores en aviso.

Notas de

Seguridad

Las siguientes notas de seguridad se incluye su pareja información

importante sobre la estuque, uso y mantenimiento.

• Este producto no está concebido para una instalación permanente.

• Conecte este producto SOLO a un circuito con toma de tierra y protegido.

• Desconecte siempre de la alimentación antes de la limpieza o

sustitución del fusible.

• NO mire a la fuente de luz cuando el producto esté encendido.

• Asegúrese de que el cable de alimentación no está retorcido ni estropeado.

• Nunca desconecte este producto de la alimentación tirando del cable.

• Cuando monte este producto en alto, use un cable de seguridad.

• NO permita la presencia de materiales inflamables cerca de la unidad

cuando esté en funcionamiento.

• NO toque este producto cuando esté en funcionamiento, pues podría estar caliente.

• La tensión del enchufe al que conecte este producto ha de estar en el

rango establecido en el grabado o en el panel posterior del producto.

• ¡Este producto es para uso en interiores solamente! (IP20) Para evitar riesgos

de incendio o descarga, no exponga este producto a la lluvia o la humedad.

• Monte siempre este producto en una ubicación con ventilación

adecuada, al menos a 20 in (50 cm) de superficies adyacentes.

• Asegúrese de que ninguna ranura de ventilación en la carcasa de la

unidad queda bloqueada.

• Nunca conecte este producto a un atenuador o reóstato.

• Sustituya el fusible con uno del mismo tipo y categoría.

•

Use SOLAMENTE los soportes de colgar/montar o las asas para mover

este producto.

• La temperatura ambiente máxima es de 104 °F (40 °C). No haga

funcionar este producto a temperaturas más altas.

• En caso de un problema grave de funcionamiento, deje de usarlo inmediatamente.

• NO abra este producto. No contiene piezas reparables por el usuario.

• Para evitar un desgaste innecesario y alargar su vida útil, desconecte

completamente el producto mediante el interruptor o desenchufándolo

durante periodos en que no se use.

Contacto

• Desde fuera de EE.UU, Reino Unido, Irlanda, México o Benelux póngase en

contacto con su distribuidor oficial para solicitar asistencia o devolver el producto.

• Desde dentro de EE.UU, Reino Unido, Irlanda, México o Benelux,

utilice la información de Contact Us al final de esta GRR.

Qué va

Incluido

• Intimidator Spot Duo 155

• Soporte para colgar con

material de montaje

• Cable de alimentación

• Tarjeta de garantía

•

Guía de Referencia Rápida

Intimidator Spot Duo 155 GRR ES

19

Para Empezar

Desembale su Intimidator Spot Duo 155 y asegúrese de que ha recibido todas las

partes en buen estado. Si la caja o los componentes parecen dañados,

notifíqueselo al transportista inmediatamente, no a Chauvet.

Descripción

El Intimidator Spot Duo 155 tiene dos cabezas móviles Intimidator Spot 155 pre-

montadas en una sola barra. Las opciones de control incluyen programas

automáticos, modos activados por sonido y DMX. Las funciones de

desplazamiento lateral e inclinación están disponibles para cada cabeza móvil.

Las opciones de iluminación incluyen ruedas de color

y gobo independientes, así

como varios programas integrados Maestro/Esclavo.

Vista General

Corriente

Alterna

El Intimidator Spot Duo 155 tiene una fuente de alimentación con detección

automática (auto-rango) que funciona con un rango de tensión de 100–

240

VCA, 50/60 Hz.

Para evitar un desgaste innecesario y alargar su vida útil, desconecte

complemente el producto de la alimentación, mediante el interruptor o

desenchufándolo, durante los periodos en los que no se use.

Alimentación

en Cadena

Para saber el máximo número de productos Intimidator Spot Duo 155 que para

cada tensión puede conectar alimentando en cadena, consulte el Manual de

Usuario o el adhesivo del producto.

Vista del Panel Posterior

Entrada de alimentación

Portafusibles

Pantalla digital

Botones de

menú

Entrada/Salida

DMX

Vista del Panel Frontal

Salida de alimentación

Lazo de

seguridad

Mando de ajuste del

trípode

Ventilador

Micrófono

Yugos

móviles

Lentes

de enfoque

Intimidator Spot Duo 155 GRR ES

20

Sustitución del

F

usible

1. Desconecte el producto de la alimentación.

2. Haga palanca con un destornillador de cabeza plana, afloje el

portafusibles y extráigalo.

3. Quite el fusible fundido.

4. Sustitúyalo con un fusible del mismo tipo y categoría.

5. Vuelva a atornillar la tapa del portafusibles en su sitio y conecte de nuevo

la alimentación.

Montaje

Antes de montar el Intimidator Spot Duo 155, lea las Notas de Seguridad de

esta GRR.

Diagrama

de Montaje

Cuando use una abrazadera de montaje con este dispositivo, asegúrese de

usar una abrazadera con tornillo prisionero para evitar que se afloje

accidentalmente.

Descripción

del P

anel de

C

ontrol

Botón

Función

<MENU>

Pasa cíclicamente por las funciones principales de menú o sale

de un submenú

<UP>

Navega hacia arriba por la lista de menú o aumenta el valor

numérico cuando está en una función

<DOWN>

Navega hacia abajo por la lista de menú o disminuye el valor

numérico cuando está en una función

<ENTER>

Entra en un menú o establece el valor que se muestra

actualmente

Inserción del

trípode

Soporte para colgar

Pies de goma

Abrazadera

de montaje

Cable de

seguridad

La pagina sta caricando ...

CHAUVET DJ Intimidator Spot Duo 155 Guida di riferimento

CHAUVET DJ Intimidator Spot Duo 155 Guida di riferimento

in altre lingue

Documenti correlati

Altri documenti