Prime R1694 Installation & Operation Manual

Marca: Prime

Modello: R1694

Categoria: Altoparlanti per auto

Tipo: Installation & Operation Manual

Questo manuale è adatto anche per

Serial Number: Date of Purchase:

Installation & Operation

FULL RANGE

SPEAKERS

R142

R152

R165

R1675R16

P165

R1694R1682

R1693

Installation assistance availible at:

www.rockfordfosgate.com/rftech

ROCKFORDFOSGATE.COM

600 South Rockford Drive • Tempe, Arizona 85281 United States

Direct: (480) 967-3565 • Toll Free: (800) 669-9899

Printed in China

102111 BCF

1230-57034-01

Dear Customer,

Congratulations on your purchase of the world’s ﬁnest brand of car audio

ampliﬁers. At Rockford Fosgate we are fanatics about musical reproduc-

tion at its best, and we are pleased you chose our product. Through

years of engineering expertise, hand craftsmanship and critical testing

procedures, we have created a wide range of products that reproduce

music with all the clarity and richness you deserve.

For maximum performance we recommend you have your new Rockford

Fosgate product installed by an Authorized Rockford Fosgate Dealer,

as we provide specialized training through Rockford Technical Training

Institute (RTTI). Please read your warranty and retain your receipt and

original carton for possible future use.

Great product and competent installations are only a piece of the puzzle

when it comes to your system. Make sure that your installer is using

100% authentic installation accessories from Rockford Fosgate in your

installation. Rockford Fosgate has everything from RCA cables and

speaker wire to power wire and battery connectors. Insist on it! After all,

your new system deserves nothing but the best.

To add the ﬁnishing touch to your new Rockford Fosgate image order

your Rockford accessories, which include everything from T-shirts to

jackets.

Visit our web site for the latest information on all Rockford products;

www.rockfordfosgate.com

or, in the U.S. call 1-800-669-9899 or FAX 1-800-398-3985. For all other

countries, call +001-480-967-3565 or FAX +001-480-966-3983.

Table of Content

If, after reading your manual, you still have questions regarding this prod-

uct, we recommend that you see your Rockford Fosgate dealer. If you need

further assistance, you can call us direct at 1-800-669-9899. Be sure to

have your serial number, model number and date of purchase available

when you call.

Safety

This symbol with “WARNING” is intended

to alert the user to the presence of important

instructions. Failure to heed the instructions

will result in severe injury or death.

This symbol with “CAUTION” is intended to

alert the user to the presence of important

instructions. Failure to heed the instructions

can result in injury or unit damage.

•To prevent injury and damage to the unit, please read and follow the

instructions in this manual. We want you to enjoy this system, not get

a headache.

•If you feel unsure about installing this system yourself, have it installed

by a qualiﬁed Rockford Fosgate technician.

•Before installation, disconnect the battery negative (-) terminal to

prevent damage to the unit, ﬁre and/or possible injury.

Introduction

Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. Speciﬁcations subject to change without notice.

PRACTICE SAFE SOUND

Continuous exposure to sound pressure levels over 100dB may cause

permanent hearing loss. High powered auto sound systems may

produce sound pressure levels well over 130dB. Use common sense

and practice safe sound.

PRATIQUEZ UNE ÉCOUTE SANS RISQUES

Une exposition continue à des niveaux de pression acoustique upérieurs à

100 dB peut causer une perte d’acuité auditive permanente. Les systèmes

audio de forte puissance pour auto peuvent produire des niveaux de

pression acoustique bien au-delà de 130 dB. Faites preuve de bon sens et

pratiquez une écoute sans risques

PRACTIQUE EL SONIDO SEGURO

El contacto continuo con niveles de presión de sonido superiores a 100

dB puede causar la pérdida permanente de la audición. Los sistemas de

sonido de alta potencia para automóviles pueden producir niveles de

presión de sonido superiores a los 130 dB. Aplique el sentido común y

practique el sonido seguro.

PRAKTIZIEREN SIE SICHEREN SOUND

Fortgesetzte Geräuschdruckpegel von über 100 dB können beim

Menschen zu permanentem Hörverlust führen. Leistungsstarke

Autosoundsysteme können Geräuschdruckpegel erzeugen, die weit über

130 dB liegen. Bitte wenden Sie gesunden Menschenverstand an und

praktizieren Sie sicheren Sound.

OSSERVATE LE REGOLE DEL SUONO SENZA PERICOLI

La costante esposizione a livelli di pressione acustica al di sopra dei

100dB possono causare la perdita permanente dell’udito. I sistemi

audio ad alta potenza possono produrre livelli di pressione acustica ben

superiori ai 130dB. Si consiglia il buon senso e l’osservanza delle regole

del suono senza pericoli

2 Introduction

3-7 Speciﬁcations

8-11 Installation

Installation Considerations

Mounting

12-15 Additional Languages

French

Spanish

German

Italian

16 Limited Warranty Information

Specications

Model

R142 R152 R16 R165 R1675 R1682 R1693 R1694

Nominal Diameter

4.0”

(102mm)

5.25”

(133)

6”

(153mm)

6.5”

(165mm)

6.75”

(171.5mm)

6” x 8”

(152 x 203mm)

6” x 9”

(152 x 230mm)

6” x 9”

(152 x 230mm)

Description 2-Way 2-Way 2-Way 2-Way 3-Way 2-Way 3-Way 4-Way

Nominal Impedance 4Ω 4Ω 4Ω 4Ω 4Ω 4Ω 4Ω 4Ω

Frequency Response 100-22kHz 53-22kHz 60-22kHz 60-22kHz 48-22kHz 57-20kHz 48-22kHz 48-22kHz

Voice Coil Diameter

1.0”

(25.4mm)

1.0”

(25.4mm)

1.0”

(25.4mm)

1.0”

(25.4mm)

1.0”

(25.4mm)

1.0”

(25.4mm)

1.25”

(32.3mm)

1.25”

(32.3mm)

Power Rating

(RMS/Peak)

25W / 50W 35W / 70W 40W / 80W 40W / 80W 40W / 80W 50W / 100W 60W / 120W 60W / 120W

Fs - Free Air Resonance 110 Hz 74 Hz 75 Hz 75 Hz 67 Hz 73 Hz 66 Hz 60 Hz

Qts 1.07 0.91 0.75 0.75 0.78 1.03 0.81 0.75

Vas

0.05ft

(1.5L)

0.27ft

(7.6L)

0.26ft

(7.5L)

0.26ft

(7.5L)

0.53ft

(14.9L)

0.44ft

(12.4L)

0.64ft

(18.0L)

0.78ft

(22.0L)

Sensitivity (1W/1M) 85.5dB 87dB 88dB 88dB 89dB 88dB 90dB 90dB

Sensitivity (2.83V/1M) 88.5dB 90dB 91dB 91dB 92dB 91dB 93dB 93dB

Xmax

0.07”

(1.9mm)

0.13”

(3.4mm)

0.17”

(4.3mm)

0.17”

(4.3mm)

0.17”

(4.3mm)

0.30”

(7.6mm)

0.20”

(5.1mm)

0.20”

(5.1mm)

Mounting Diameter

3.67”

(93.5mm)

4.76”

(121.0mm)

5.05”

(124.0mm)

5.05”

(124.0mm)

5.81”

(147.5mm)

5.08”x7.32”

(129.0x186.0mm)

6.02”x8.74”

(153.0x222.0mm)

6.00”x8.70”

(152.5x221.0mm)

Mounting Depth

1.64”

(41.8mm)

1.91”

(48.5mm)

1.97”

(50.1mm)

1.97”

(50.1mm)

2.00”

(51.2mm)

2.54”

(64.5mm)

2.65”

(72.4mm)

2.85”

(72.4mm)

Grille/Trim Ring YES YES YES YES YES NO YES YES

Adaptor Plate NO NO NO NO NO NO NO NO

See pages 4-6 for additional dimensions

CEA 2006

Power ratings on Rockford Fosgate ampliﬁers conform to CEA-2006 industry standards. These guidelines mean

your ampliﬁer’s output power ratings are REAL POWER numbers, not inﬂated marketing ratings.

Specications

illus.-1.1

R16/R165

5.68"

(144.3mm)

Diameter

6.52"

(165.5mm)

Diameter

5.98"

(152.0mm)

4.31"

(109.6mm)

2.51"

(63.9mm)

1.97"

(50.1mm)

4.88"

(124.0mm)

6.75"

(171.5mm)

0.78"

(19.8mm)

5.31"

(135.0mm)

0.51"

(13.0mm)

5.91"

(150.1mm)

Diameter

5.41"

(137.5mm)

Diameter

6.02"

(153.0mm)

3.83"

(97.2mm)

6.10"

(154.6mm)

2.47"

(62.9mm)

0.70"

(17.9mm)

1.91"

(48.5mm)

4.76"

(121.0mm)

R152

R142

4.60"

(116.8mm)

Diameter

4.03"

(102.4mm)

3.26"

(83.0mm)

2.16"

(54.9mm)

1.64"

(41.8mm)

3.67"

(93.5mm)

Specications

illus.-1.2

R1682

4.25"

(108.0mm)

8.00"

(203.0mm)

5.00"

(127.0mm)

5.71"

(145.0mm)

5.08"

(129.0mm)

3.10"

(78.7mm)

2.54"

(64.5mm)

7.32"

(186.0mm)

R1675

6.46"

(164.0mm)

Diameter

7.01"

(178.0mm)

4.57"

(116.0mm)

7.00"

(178.0mm)

5.81"

(147.50mm)

2.0"

(51.20mm)

2.69"

(68.35mm)

0.67"

(17.09mm)

Specications

illus.-1.3

R1693

1.18"

(30.0mm)

10.20"

(259.0mm)

3.89"

(98.9mm)

2.85"

(72.4mm)

8.74"

(222.0mm)

5.77"

(146.5mm)

7.56"

(192.0mm)

6.48"

(164.5mm)

9.22"

(234.2mm)

4.78"

(121.5mm)

6.48"

(164.5mm)

R1694

1.18"

(30.0mm)

10.20"

(259.0mm)

3.90"

(99.1mm)

2.85"

(72.4mm)

8.70"

(221.0mm)

6.00"

(152.5mm)

7.56"

(192.0mm)

6.48"

(164.5mm)

9.22"

(234.2mm)

4.78"

(121.5mm)

6.48"

(164.5mm)

Rear

Deck

Cutout

Hole

Example of rear

deck installation

Cutout

Hole

Example of standard

door installation

Installation

Contents

•(1) Pair Punch Series Full Range Speakers

•(1) Pair of grilles/trim rings (R142, R152, R16, R165, R1675,

R1693 and R1694 only)

•Mounting Hardware

Installation Considerations

Before beginning any installation, follow these simple rules:

1. Be sure to carefully read and understand the instructions before

attempting to install these speakers.

2. For safety, disconnect the negative lead from the battery prior to

beginning the installation.

3. For easier assembly, we suggest you run all wires prior to mounting

your speakers in place.

4. Use high quality connectors for a reliable installation and to minimize

signal or power loss.

5. Think before you drill! Be careful not to cut or drill into gas tanks, fuel

lines, brake or hydraulic lines, vacuum lines or electrical wiring when

working on any vehicle. If installation in a boat, take care not to cut or

drill through the main hull.

6. Never run wires underneath the vehicle. Running the wires inside the

vehicle or hull area provides the best protection.

7. Avoid running wires over or through sharp edges. Use rubber or

plastic grommets to protect any wires routed through metal, especially

the ﬁrewall.

Mounting

1. Determine where the speakers will be mounted. Ensure an area large

enough for the speaker to mount evenly. Be sure that the mounting

location is deep enough for the speaker to ﬁt; if mounting in a door,

operate all functions (windows, locks, etc.) through their entire

operating range to ensure there is no obstruction.

2. Refer to the speciﬁcation chart to determine the proper diameter hole

to cut for your speaker model. Cutting and mounting templates can be

found at www.rockfordfosgate.com.

3. Mark the locations for the mounting screws. Drill the holes with a

1/8” bit.

4. Feed the speaker wires through the cutout and connect to the speaker

terminals. Be sure to observe proper polarity when connecting the

wires.The speaker’s positive terminal is indicated with a “+”.

5. Fit the trim ring over the speaker and mount into place using four (4)

screws.

6. Tighten the screws until the speaker is snug in place to prevent

rattling. Do not over tighten the screws.

illus.-2.1

illus.-2.2

Installation

illus.-3.1

1.00"

(25.40mm)

Verify Scale

Before Using

Template

1.00"

(25.40mm)

Mounting Holes

3.67"

(93.46mm)

3.26"

(82.94mm)

R142 Hole Cutout

Installation

illus.-3.2

4.76"

(121.0mm)

5.41"

(137.5mm)

1.00"

(25.40mm)

Verify Scale

Before Using

Template

1.00"

(25.40mm)

R152

Mounting

Holes

R152 Hole Cutout

5.05"

(124.0mm)

5.68"

(144.3mm)

1.00"

(25.40mm)

Verify Scale

Before Using

Template

1.00"

(25.40mm)

R16/R165

Mounting

Holes

R16/R165 Hole Cutout

Installation

illus.-3.3

1.00"

(25.40mm)

Verify Scale

Before Using

Template

1.00"

(25.40mm)

6.46"

(164.0mm)

R1675

Mounting

Holes

5.81"

(147.5mm)

R1675 Hole Cutout

Installation

illus.-3.4

1.00"

(25.40mm)

Verify Scale

Before Using

Template

1.00"

(25.40mm)

7.32"

(186.00mm)

5.08"

(129.00mm)

R1682

Hole

Cutout

illus.-3.5

Installation

6.48"

(164.5mm)

4.78"

(121.5mm)

1.00"

(25.40mm)

Verify Scale

Before Using

Template

1.00"

(25.40mm)

R1693/R1694

Mounting

Holes

6.02" x 8.74"

(153.0mm x 222.0mm)

R1693/R1694 Hole Cutout

illus.-3.6

Installation

Français Español

Considérations Concernant L’installation

Avant de commencer l’installation, suivez les règles ci-dessous:

1. Veillez à bien lire et comprendre les instructions avant d’essayer

d’installer les haut-parleurs.

2. Par mesure de sécurité, débranchez le ﬁl négatif de la batterie avant de

commencer l’installation.

3. Pour faciliter le montage des haut-parleurs, il est conseillé d’installer

tous les câbles au préalable.

4. Utilisez des connecteurs de haute qualité pour assurer une installation

ﬁable et réduire au minimum la perte de signal ou de puissance.

5. Réﬂéchissez bien avant de percer.Veillez à ne pas couper ou percer

le réservoir d’essence, le câblage électrique ou les conduites de

carburant, de freinage hydraulique ou de dépression en travaillant

sur un véhicule. En cas d’installation sur un bateau, veillez à ne pas

couper ou percer la coque principale.

6. Ne jamais faire passer de ﬁls sous le véhicule. Leur installation à

l’intérieur du véhicule ou de la coque assure la meilleure protection.

7. Évitez de faire passer des ﬁls sur des bords tranchants ou dans

des oriﬁces à arêtes vives. Utilisez des bagues en caoutchouc ou

en plastique pour protéger les ﬁls traversant une plaque de métal,

notamment le tablier.Emplacements De Montage

Montage

1. Déterminez l’emplacement des haut-parleurs.Veillez à ce que la

surface plane soit assez grande pour assurer un contact uniforme

du haut-parleur.Vériﬁez que l’emplacement est assez profond pour le

haut-parleur ; en cas de montage dans une portière, actionnez toutes

les commandes (fenêtres, serrures, etc.) jusqu’aux extrémités de leurs

courses pour vous assurer qu’il n’y a pas d’obstruction.

2. Consultez le tableau des caractéristiques pour déterminer le diamètre

de l’oriﬁce à découper pour votre modèle de haut-parleur. Le gabarit

fourni donne aussi le bon diamètre de découpe.Les gabarits de coupe

et de montage sont disponibles sur la page www.rockfordfosgate.

com/rftech.

3. Marquez l’emplacement des vis de montage. Percez les trous avec

une mèche de 1/8 de pouce (3,2 mm).

4. Faites passer les ﬁls de haut-parleur à travers l’oriﬁce découpé et

branchez-les aux bornes du haut-parleur.Veillez à bien respecter la

polarité lors du branchement. La borne positive du haut-parleur est

indiquée par un « + ».

5. Disposez l’anneau de garniture sur le haut-parleur et ﬁxez-le avec

quatre (4) vis.

6. Serrez les vis jusqu’à ce que le haut-parleur soit bien ajusté, de façon

à prévenir tout cliquetis, mais évitez tout serrage excessif..

Consideraciones para la instalación

Antes de comenzar cualquier instalación, siga estas simples normas:

1. 1. Asegúrese de leer cuidadosamente y de entender las instrucciones

antes de tratar de instalar estos altavoces.

2. Por seguridad, desconecte el conductor negativo de la batería antes

de comenzar la instalación.

3. Para facilitar el montaje, sugerimos que tienda todos los cables antes

de montar sus altavoces en su sitio.

4. Utilice conectores de alta calidad para tener una instalación conﬁable

y para reducir al mínimo las pérdidas de señal o de potencia.

5. ¡Piense siempre antes de perforar! Tenga cuidado de no cortar ni

perforar en tanques de combustible, tuberías de combustible, frenos

o hidráulicas, tuberías de vacío o cableado eléctrico al trabajar en un

vehículo. Si la instalación se hace en un bote, tenga cuidado de no

cortar ni perforar a través del casco principal.

6. Nunca tienda cables abajo del vehículo.Tender los cables adentro del

vehículo o casco proporciona la mejor protección.

7. Evite tender cables arriba o a través de bordes ﬁlosos. Use arandelas

aislantes de caucho para proteger los cables tendidos a través de

metal, especialmente la mampara cortafuegos.Montage

Montaje

1. Determine adónde se montará los altavoces.Asegúrese de que haya un

área suﬁcientemente grande para montar de manera plana el altavoz.

Asegúrese de que el lugar de montaje sea suﬁcientemente profundo

para que quepa el altavoz, si se monta en una puerta, accione

todas las funciones (ventanas, cerradura, etc.) en toda su gama de

funcionamiento para asegurarse de que no haya obstrucciones.

2. Consulte la tabla de especiﬁcaciones para determinar cuales son

los diámetros correctos para el agujero a cortar para su modelo de

altavoz. La plantilla proporcionada también le da la medida correcta

del recorte.Se puede hallar las plantillas para el corte y el montaje en

www.rockfordfosgate.com/rftech.

3. Marque las localidades para los tornillos de montaje. Perfore los

agujeros usando una broca de 1/8 pulg.

4. Tienda los cables del altavoz a través del recorte y conecte a los

terminales del altavoz.Asegúrese de usar la polaridad correcta al

conectar los cables. El terminal positivo del altavoz está identiﬁcado

con un símbolo “+”.

5. Coloque el anillo de acabado arriba del altavoz y móntelo en su sitio

usando cuatro (4) tornillos.

6. Apriete los tornillos hasta que el altavoz esté ajustado en su sitio para

evitar vibraciones. No apriete demasiado los tornillos.

Deutsch Italiano

Einbauüberlegungen

Befolgen Sie vor dem Einbau diese einfachen Regeln:

1. 1. Lesen Sie die Anleitung sorgfältig, bevor Sie versuchen diese

Lautsprecher einzubauen.

2. Entfernen Sie vor dem Einbau aus Sicherheitsgründen das negative

Kabel von der Batterie.

3. Um die Montage zu erleichtern, empfehlen wir alle Kabel vor der

Befestigung Ihrer Lautsprecher zu verlegen.

4. Verwenden Sie nur Qualitätsstecker, um einen zuverlässigen Einbau

zu gewährleisten und Signal- und Stromverlust zu minimieren.

5. Denken Sie nach, bevor Sie bohren! Achten Sie darauf, nicht

in den Benzintank, die Benzin-, Brems- oder hydraulischen

Leitungen,Vakuumleitungen oder Elektrokabel zu schneiden oder zu

bohren,wenn Sie am Fahrzeug arbeiten.Achten Sie beim Einbau in

einem Boot darauf, nicht durch den Bootsrumpf zu schneiden oder

zu bohren.

6. Verlegen Sie Kabel nie unter dem Fahrzeug. Die Kabel im Fahrzeug

oder Bootsrumpf zu verlegen, bietet den besten Schutz.

7. Vermeiden Sie es, Kabel über scharfe Kanten zu verlegen.Verwenden

Sie Gummi- oder Plastikringe, um Kabel zu schützen, die durch

Metall verlegt werden (besonders die Feuerwand).

Befestigung

1. Entscheiden,wo die Lautsprecher befestigt werden sollen.

Gewährleisten, dass der Platz ausreicht, um den Lautsprecher

gleichmäßig zu befestigen. Gewährleisten, dass die Befestigungsstelle

ausreichende Tiefe für den Lautsprecher hat; beim Einbau in einer

Türe alle Funktionen (Fenster, Schloss usw.) in ihrem ganzen Bereich

ausprobieren um zu gewährleisten, dass keine Blockierung eintritt.

2. Die Tabelle in den Technischen Daten gibt den richtigen

Lochdurchmesser für Ihr Lautsprechermodell zum Ausschneiden

an. Die beiliegende Schablone zeigt ebenfalls die richtige

Ausschneidegröße an.Schneide- und Befestigungsschablonen ﬁnden

Sie unter www.rockfordfosgate.com/rftech.

3. Die Stellen für die Befestigungsschrauben markieren. Die Löcher mit

einer 1/8-Zoll (3,2 mm) Bohrerspitze bohren.

4. Die Lautsprecherkabel durch das Loch führen und an den

Lautsprecherausgängen anschließen. Beim Anschließen der Kabel

die ordnungsgemäße Polarität beachten. Der positive Anschluss des

Lautsprechers ist mit einem „+“ markiert.

5. Den Zierring über den Lautsprecher legen und mit 4 (vier) Schrauben

an seinem Platz befestigen.

6. Die Schrauben anziehen, bis der Lautsprecher eng an seinem Platz

anliegt, um Klappern zu verhindern. Die Schrauben nicht zu fest

anziehen..

Considerazioni sull’installazione

Prima di iniziare qualsiasi operazione d’installazione, vi consigliamo di

seguire queste semplici regole:

1. Assicuratevi di aver letto tutte le istruzioni con cura e di averle capite

prima di effettuare qualsiasi tentativo d’installazione neiconfronti

dell’unità.

2. Per motivi di sicurezza, scollegate il cavo negativo dalla batteria prima

di dare l’avvìo all’installazione.

3. Per facilitare il montaggio, vi suggeriamo di far scorrere tutti i ﬁli

prima di montare la vostra unità nella sua ubicazione.

4. Usate connettori di alta qualità per garantire un’installazione che dà

afﬁdamento e per ridurre al minimo la perdita di segnali o di potenza.

5. State attenti prima di trapanare! Cercate di non trapanare e di non

incidere i serbatoi della benzina; le condutture del carburante, dei

freni, del sistema idraulico e a depressione; nonché i ﬁli elettrici

quando state lavorando su qualsiasi veicolo.

6. Non fate mai scorrere i ﬁli sotto il veicolo.Avrete la protezione migliore

faccendo scorrere i ﬁli all’interno del veicolo.

7. Evitate di far scorrere i ﬁli sopra o attraverso delle estremità afﬁlate.

Usate guarnizioni di tenuta in gomma o in plastica per proteggere

qualsiasi ﬁlo che passi attraverso del metallo, soprattutto il

paraﬁamma.

Montaggio

1. Decidete dove montare gli altoparlanti.Assicuratevi che sia un’area

abbastanza grande per poter montare l’altoparlante a livello e

abbastanza profonda per poterlo collocare comodamente. Se lo

montate all’interno di uno sportello, controllate tutte le funzioni

(ﬁnestre, serrature, ecc.), una alla volta, per assicurarvi che non ci

siano ostruzioni.

2. Fate riferimento alla tabella delle speciﬁche per stabilire il diametro

corretto del foro che dovrete praticare per il modello del vostro

altoparlante.Si possono trovare le sagome per il taglio e il montaggio

presso www.rockfordfosgate.com/rftech.

3. Marcare le posizioni per le viti di montaggio. Praticare i fori con una

punta da trapano di 1/8 di pollice (3,2 mm).

4. Passare i cavi del diffusore tramite l’apertura e collegarli ai terminali.

Veriﬁcare che la polarità sia corretta quando si collegano i cavi. Il

terminale positivo del diffusore è identiﬁcato dal “+”.

5. Adattare l’anello di ﬁnitura sul diffusore e montare in posizione

servendosi delle quattro (4) viti.

6. Per evitare rumore dovuto a vibrazioni serrare le viti ﬁnché il

diffusore non sia saldamente in posizione. Non serrare le viti in modo

eccessivo..

Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms:

Length of Warranty

Speakers, Signal Processors, PRIME and PUNCH Ampliﬁers – 1 Year

POWER Ampliﬁers – 2 Years

Any Factory Refurbished Product – 90 days (receipt required)

What is Covered

This warranty applies only to Rockford Fosgate products sold to consumers by Authorized Rockford Fosgate Dealers in the United States of America or its

possessions. Product purchased by consumers from an Authorized Rockford Fosgate Dealer in another country are covered only by that country’s Distribu-

tor and not by Rockford Corporation.

Who is Covered

This warranty covers only the original purchaser of Rockford product purchased from an Authorized Rockford Fosgate Dealer in the United States. In order

to receive service, the purchaser must provide Rockford with a copy of the receipt stating the customer name, dealer name, product purchased and date of

purchase.

Products found to be defective during the warranty period will be repaired or replaced (with a product deemed to be equivalent) at Rockford’s discretion.

What is Not Covered

1. Damage caused by accident, abuse, improper operations,water, theft, shipping.

2. Any cost or expense related to the removal or reinstallation of product.

3. Service performed by anyone other than Rockford or an Authorized Rockford Fosgate Service Center.

4. Any product which has had the serial number defaced, altered, or removed.

5. Subsequent damage to other components.

6. Any product purchased outside the U.S.

7. Any product not purchased from an Authorized Rockford Fosgate Dealer.

Limit on Implied Warranties

Any implied warranties including warranties of ﬁtness for use and merchantability are limited in duration to the period of the express warranty set forth

above. Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for

Rockford Fosgate any other liability in connection with the sale of the product.

How to Obtain Service

Contact the Authorized Rockford Fosgate Dealer you purchased this product from. If you need further assistance, call 1-800-669-9899 for Rockford Cus-

tomer Service. You must obtain an RA# (Return Authorization number) to return any product to Rockford Fosgate. You are responsible for shipment of

product to Rockford.

EU Warranty

This product meets the current EU warranty requirements, see your Authorized dealer for details.

Warranty