Yamaha DSP-AX3200 Manuale utente

DSP-AX3200

GB

AV AMPLIFIER

AMPLIFICATEUR AUDIO-VIDEO

YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND

YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

Printed in Japan

V817900

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

MANUALE DI ISTRUZIONI

MANUAL DE INSTRUCCIONES

GEBRUIKSAANWIJZING

DSP-AX3200

CAUTION

1 To assure the finest performance, please read this

manual carefully. Keep it in a safe place for future

reference.

2 Install this unit in a well ventilated, cool, dry, clean

place with at least 30 cm on the top, 20 cm on the

right and left, and 10 cm at the back of this unit

— away from direct sunlight, heat sources,

vibration, dust, moisture, and/or cold.

3 Locate this unit away from other electrical

appliances, motors, or transformers to avoid

humming sounds. To prevent fire or electrical

shock, do not place this unit where it may get

exposed to rain, water, and/or any type of liquid.

4 Do not expose this unit to sudden temperature

changes from cold to hot, and do not locate this

unit in a environment with high humidity (i.e. a

room with a humidifier) to prevent condensation

inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal

injury.

5 On the top of this unit, do not place:

– Other components, as they may cause damage

and/or discoloration on the surface of this unit.

– Burning objects (i.e. candles), as they may

cause fire, damage to this unit, and/or personal

injury.

– Containers with liquid in them, as they may

cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper,

tablecloth, curtain, etc. in order not to obstruct

heat radiation. If the temperature inside this unit

rises, it may cause fire, damage to this unit, and/or

personal injury.

7 Do not plug in this unit to a wall outlet until all

connections are complete.

8 Do not operate this unit upside-down. It may

overheat, possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cord from the wall

outlet, grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this

might damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used.

Using this unit with a higher voltage than

specified is dangerous and may cause fire,

damage to this unit, and/or personal injury.

YAMAHA will not be held responsible for any

damage resulting from use of this unit with a

voltage other than specified.

13 To prevent damage by lightning, disconnect the

power cord from the wall outlet during an

electrical storm.

14 Take care of this unit so that no foreign objects

and/or liquid drops inside this unit.

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

15 Do not attempt to modify or fix this unit. Contact

qualified YAMAHA service personnel when any

service is needed. The cabinet should never be

opened for any reasons.

16 When not planning to use this unit for long

periods of time (i.e. vacation), disconnect the AC

power plug from the wall outlet.

17 Be sure to read the “TROUBLESHOOTING” section

on common operating errors before concluding

that this unit is faulty.

18 Before moving this unit, press STANDBY/ON to set

this unit in the standby mode, and disconnect the

AC power plug from the wall outlet.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet,

even if this unit itself is turned off. This state is called

the standby mode. In this state, this unit is designed to

consume a very small quantity of power.

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

Note

• The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K.

Model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED

IN ACCORDANCE WITH THE FOLLOWING

CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

English

INTRODUCTION

PREPARATION

BASIC

OPERATION

ADDITIONAL

INFORMATION

ADVANCED

OPERATION

1

CONTENTS

INTRODUCTION

CONTENTS ....................................................... 1

FEATURES ........................................................ 2

GETTING STARTED ....................................... 3

Checking the Package Contents ............................... 3

Installing Batteries in the Remote Control ............... 3

CONTROLS AND FUNCTIONS .................... 4

Front Panel ............................................................... 4

Remote Control ........................................................ 6

Using the Remote Control ........................................ 7

Front Panel Display .................................................. 8

Rear Panel ................................................................ 9

PREPARATION

SPEAKER SETUP .......................................... 10

Speakers to Be Used ............................................... 10

Speaker Placement ................................................. 10

Connecting the Speakers ........................................ 11

CONNECTIONS ............................................. 14

Before Connecting Components ............................ 14

Connecting Video Components .............................. 14

Connecting Audio Components ............................. 16

Connecting to an External Amplifier ..................... 18

Connecting an External Decoder ............................ 18

Connecting the Power Supply Cords ...................... 19

Turning on the Power ............................................. 19

ON-SCREEN DISPLAY (OSD) ..................... 20

OSD Modes ............................................................ 20

Selecting the OSD Mode ........................................ 20

SPEAKER MODE SETTINGS ..................... 21

Summary of SPEAKER SET Items 1A through 1F ...

21

ADJUSTING THE SPEAKER OUTPUT

LEVELS ....................................................... 22

Before You Begin ................................................... 22

Using the Test Tone (TEST DOLBY SUR.) .......... 22

BASIC OPERATION

BASIC PLAYBACK ........................................ 24

Input Modes and Indications .................................. 26

Selecting a Sound Field Program ........................... 27

Selecting PRO LOGIC or Neo: 6 ....................... 28

DIGITAL SOUND FIELD PROCESSING

(DSP) ............................................................ 30

Understanding Sound Fields .................................. 30

Hi-Fi DSP Programs............................................... 30

CINEMA-DSP ................................................. 32

Sound Design of CINEMA-DSP ............................ 32

CINEMA-DSP Programs ....................................... 34

BASIC RECORDING ..................................... 36

ADVANCED OPERATION

REMOTE CONTROL FEATURES .............. 37

Control Area ........................................................... 37

Setting the Manufacturer Code .............................. 38

Programming a New Remote Control Function

(Learn Feature) ................................................... 39

Using the Macro Feature ........................................ 40

Changing the Source Name in the Display Window

............................................................................ 42

Clearing Learned Functions, Macros, Renamed

Source Names, and Setup Manufacturer Codes ...

42

Clearing a Learned Function or Macro .................. 43

Each Component Control Area .............................. 45

SET MENU ...................................................... 50

Adjusting the Items on the SET MENU................. 50

1 SPEAKER SET (speaker mode settings) ........... 51

2 LOW FRQ TEST ............................................... 54

3 L/R BALANCE (balance of the left and right main

speakers)............................................................. 55

4 HP TONE CTRL (headphone tone control) ....... 55

5 CENTER GEQ (center graphic equalizer) ......... 55

6 INPUT RENAME .............................................. 56

7 I/O ASSIGNMENT ............................................ 56

8 INPUT MODE (initial input mode) ................... 57

9 PARAM. INI (parameter initialization) ............. 58

10 LFE LEVEL ..................................................... 58

11 D-RANGE ........................................................ 59

12 SP DELAY TIME ............................................. 59

13 DISPLAY SET .................................................. 60

14 MEMORY GUARD ......................................... 60

ADJUSTING THE LEVEL OF THE EFFECT

SPEAKERS .................................................. 61

SLEEP TIMER ................................................ 62

Setting the Sleep Timer .......................................... 62

Canceling the Sleep Timer ..................................... 62

ADDITIONAL INFORMATION

SOUND FIELD PROGRAM PARAMETER

EDITING ..................................................... 63

What is a sound field? ............................................ 63

Sound Field Program Parameters ........................... 63

Changing Parameter Settings ................................. 64

Resetting a Parameter to the Factory-set Value ...... 64

DIGITAL SOUND FIELD PARAMETER

DESCRIPTIONS ......................................... 65

TROUBLESHOOTING .................................. 69

GLOSSARY ..................................................... 73

SPECIFICATIONS ......................................... 75

2

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

“DTS”, “DTS-ES Extended Surround” and “Neo: 6” are

trademarks of Digital Theater System, Inc.

FEATURES

Built-in 6-Channel Power Amplifier

◆ Minimum RMS Output Power

(0.02% THD, 20 Hz – 20 kHz, 8Ω)

Main: 120 W + 120 W

Center: 120 W

Rear: 120 W + 120 W

Rear center: 120 W

Multi-Mode Digital Sound Field

Processing

◆ Dolby Pro Logic/Dolby Pro Logic Decoder

◆ Dolby Digital/Dolby Digital Matrix 6.1 Decoder

◆ DTS/DTS ES (Matrix 6.1, Discrete 6.1)/DTS

Neo: 6 Decoder

◆ CINEMA DSP: Combination of YAMAHA DSP

Technology and Dolby Pro Logic, Dolby Digital

or DTS

◆ Virtual CINEMA DSP

◆ SILENT CINEMA DSP

Other Features

◆ 96-kHz/24-bit D/A Converter

◆ “SET MENU” which Provides You with 14 Items

for Optimizing This Unit for Your Audio/Video

System

◆ Test Tone Generator for Easier Speaker Balance

Adjustment

◆ 6-Channel External Decoder Input for Other

Future Formats

◆ BASS EXTENSION for Reinforcing Bass

Response

◆ On Screen Display Function Helpful in

Controlling This Unit

◆ S Video Signal Input/Output Capability

◆ Component Video Input/Output Capability

◆ Optical and Coaxial Digital Audio Signal Jacks

◆ Sleep Timer

◆ Remote Control with Preset Manufacturer Codes

and “Learning” Capability

◆ PROCESSOR DIRECT for no alteration of the

original signal

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the main unit or on the remote control. In cases when the button

names differ between the main unit and the remote control, the button name on the remote control is given in parentheses in this

manual.

English

INTRODUCTION PREPARATION

BASIC

OPERAIONT

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

3

TRANSMIT

RE-NAME

STANDBY

6CH INPUT

SOUND

SYSTEM

CLEAR LEARN MACRO

OFF ON

MACRO

PHONO

A

B

CD

DVD

VCR2/DVR

VCR 1

TITLE

MENU

CHAPTER

PAUSESTOPPOWER

REC

HALL 1

6.1/ES

DSP

10KEY

ROCK

CONCERT

MOVIE

THEATER 1

MOVIE

THEATER 2

MUTE

VOLUME

STEREO

TV INPUT

TV VOL

CH

PRESET

DISC

PARAMETER

SET MENU

EFFECT

LEVEL

ON SCREEN

TESTSLEEP

TV MUTE

CONCERT

VIDEO

TV

THEATER

ENTER-

TAINMENT

HALL 2

CHURCH

JAZZ CLUB

SELECT

/DTS

SUR.

CHP/INDEX

A/B/C/D/E

SELECT

DISPLAY

SEARCH

SOURCE

PLAY

–+

ENTER

D-TV/LD

CBL/SAT

CD-R

MD/TAPE

TUNER

V-AU X

POWER

1

5

9

6

10

0

10

100

11 12

78

234

++

1 Open the battery compartment cover.

2 Insert three supplied batteries (LR6) in the

correct direction by aligning the + and –

marks on the batteries with the polarity

markings (+ and –) on the inside of the

battery compartment.

3 After new batteries are correctly inserted,

press the RESET button in the battery

compartment using a ball point pen or

similar object. (This does not clear the

contents of the memory.)

4 Replace the cover as pressing until it snaps

into place.

Connection GuideBatteries (3) (LR6)

Remote control

GETTING STARTED

Checking the Package Contents

Check your package to make sure it has the following items.

Power Cord

(Europe model only)

RESET button

DVD Player

Main Speaker

TV

Subwoofer

Center Speaker Rear Center

Speaker

Rear Speaker

CONNECTION

GUIDE

L

R

V

S

O

Analog audio signal

Optical digital signal

S video signal

Video signal

Signal flow

V817920

COMPONENT VIDEO

IMPEDANCE SELECTOR

SET BEFORE POWER ON

FRONT :

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

FRONT :

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

PRE OUT/MAIN IN

MAIN OUT

Y

P

R

/C

R

P

B

/C

B

DVD

MONITOR

OUT

DVD

IN

VCR 1

OUT

IN

VCR 2

/DVR

OUT

S VIDEO VIDEO

D-TV

/LD

CBL

/SAT

D-TV

/LD

MAIN IN

REAR (SURROUND)

SUB

WOOFER

CENTER

SPEAKERS

REARCENTER

MAIN

+

–

+

–

+

–

REAR

CENTER

RS-232C

(SURROUND)

REAR

CENTER

VIDEO

VIDEOS VIDEO

AUDIO

DIGITAL INPUT

SIGNAL GND

6CH INPUT

CENTER

MAIN

SURROUND

AUDIODIGITAL OUTPUT

MONITOR

OUT

PHONO

CBL

/SAT

CD

D-TV

/LD

DVD

CD-R

MD/

TAPE

CD

OPTICAL

COAXIAL

SUB

WOOFER

CD

OUT (REC)

CD-R

IN (PLAY)

OUT (REC)

MD/TAPE

IN (PLAY)

R

L

R

L

R

L

R

L

R

L

R

L

R

L

AB

+

6ΩMIN. /SPEAKER

4ΩMIN. /SPEAKER

8ΩMIN. /SPEAKER

1

2

3

4

5

6

7

8

3

A

B

4

3

4

1

LR

AUDIO OUT S VIDEO

OUT

VIDEO

OUT

OPTICAL

OUT

COMPONENT

VIDEO OUT

VIDEO IN

VIDEO

OUT

OPTICAL

OUT

V

O

Right Left

Installing Batteries in the Remote Control

■ Notes on batteries

• Change all of the batteries if you notice the condition

like; the operating range of the remote control

decreases, the indicator does not flash or its light

becomes dim.

• Do not use old batteries together with new ones.

• Do not use different types of batteries (such as alkaline

and manganese batteries) together. Read the packaging

carefully as these different types of batteries may have

the same shape and color.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or

letting it come into contact with clothing, etc. Clean

the battery compartment thoroughly before installing

new batteries.

If the remote control is without batteries for more than

3 minutes, or if exhausted batteries remain in the

remote control, the contents of the memory may be

cleared. When the memory is cleared, insert new

batteries, set up the manufacturer code and program

any acquired functions that may have been cleared.

4

CONTROLS AND FUNCTIONS

Front Panel

1 STANDBY/ON

Turns on and sets this unit in the standby mode. When

you turn on this unit, you will hear a click and there will

be a 4 to 5-second delay before this unit can reproduce

sound.

Standby mode

In this mode, this unit consumes a small amount of

power to receive infrared-signals from the remote

control.

2 Remote control sensor

Receives signals from the remote control.

3 Front panel display

Shows information about the operational status of this

unit (see page 8).

4 INPUT MODE

Sets the priority for the types of input signals (AUTO,

DTS, ANALOG) to receive when one component is

connected to two or more input jacks of this unit (see

page 26). Priority cannot be set when 6CH INPUT is

selected as the input source.

5 INPUT l / h

Selects the input source you want to listen to or watch.

6 VOLUME

Controls the output level of all audio channels.

This does not affect the REC OUT level.

7 PHONES jack

Outputs audio signals for private listening with

headphones. When you connect headphones, no signals

are output to the PRE OUT jacks or to the speakers.

8 BASS EXTENSION

Turns on or off the BASS EXTENSION function at each

time the button is pressed, this feature boosts the bass

frequency of the left and right main channels by +6 dB

(60 Hz) while maintaining overall tonal balance. This

boost is useful if you do not use a subwoofer.

However, this boost may not be noticeable if “1B MAIN

SP” on the SET MENU is set to SMALL and “1E LFE/

BASS OUT” is set to SWFR.

9 PROCESSOR DIRECT

Turns on or off the PROCESSOR DIRECT function at

each time the button is pressed. When this is on, BASS,

TREBLE, and BASS EXTENSION are bypassed,

eliminating any alteration of the original signal.

0 SPEAKERS A/B

Turn on or off the set of main speakers connected to the A

and/or B terminals on the rear panel at each time its

corresponding button is pressed.

BASS

SPEAKERS

A

BASS

EXTENSION

PROCESSOR

DIRECT

B

VOLUME

INPUT

INPUT MODE

VIDEO AUX

SILENT

PHONES

S VIDEO VIDEO AUDIOLR

6CH

INPUT

OPTICAL

STANDBY

/

ON

NATURAL SOUND AMPLIFIER

TREBLE

– +

DIGITAL

EFFECT

– +

PROGRAM

STEREO

SET MENU

+

REC OUT

V-AU X

VCR2

/DVR

VCR1

PHONO

CD

TUNER

MD/TAPE

DVD

SOURCE

D-TV/LD

CBL/SAT

CD-R

1

23

45

6

78

9

q

w

e

r

t

i

0

y u

5

English

INTRODUCTION PREPARATION

BASIC

OPERAIONT

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

CONTROLS AND FUNCTIONS

V

O

L

U

M

E

N

A

T

UR

AL SO

UN

D A

V AM

PL

IFIER

YA

MAHA

To open, press gently on the lower part of the panel.

q BASS

Adjusts the low-frequency response for the left and right

main channels.

Turn the control to the right to increase or to the left to

decrease the low-frequency response.

w TREBLE

Adjusts the high-frequency response for the left and right

main channels.

Turn the control to the right to increase or to the left to

decrease the high-frequency response.

Note

• If you increase or decrease the high-frequency or the low-

frequency sound to an extreme level, the tonal quality from the

center and rear speakers may not match that of the left and

right main speakers.

e REC OUT

Selects the source you want to direct to the audio/video

recorder.

r STEREO/EFFECT

Switches the normal stereo or DSP effect reproduction.

When STEREO is selected, 2-channel input signals are

directed to the main left and right speakers without effect

sounds. All Dolby Digital and DTS audio signals except

for the LFE channel are mixed down to the main left and

right speakers.

t PROGRAM l / h

Selects the DSP program.

y 6CH INPUT

Selects the source connected to the 6CH INPUT jacks.

The source selected by pressing 6CH INPUT takes

priority over the source selected with INPUT l / h (or

the input selector buttons on the remote control).

u NEXT — SET MENU –/+

Changes the SET MENU settings.

i VIDEO AUX jacks

Input audio and video signals from a portable external

source such as a game console. To reproduce source

signals from these jacks, select V-AUX as the input

source.

■ Opening and closing the front

panel door

When you are not operating the controls behind the front

panel door, close the door.

6

CONTROLS AND FUNCTIONS

TRANSMIT

RE-NAME

STANDBY

6CH INPUT

SOUND

SYSTEM

CLEAR LEARN MACRO

OFF ON

MACRO

PHONO

A

B

CD

DVD

VCR2/DVR

VCR 1

TITLE

MENU

CHAPTER

PAUSESTOPPOWER

REC

HALL 1

6.1/ES

DSP

10KEY

ROCK

CONCERT

MOVIE

THEATER 1

MOVIE

THEATER 2

MUTE

VOLUME

STEREO

TV INPUT

TV VOL

CH

PRESET

DISC

PARAMETER

SET MENU

EFFECT

LEVEL

ON SCREEN

TESTSLEEP

TV MUTE

CONCERT

VIDEO

TV

THEATER

ENTER-

TAINMENT

HALL 2

CHURCH

JAZZ CLUB

SELECT

/DTS

SUR.

CHP/INDEX

A/B/C/D/E

SELECT

DISPLAY

SEARCH

SOURCE

PLAY

– +

ENTER

D-TV/LD

CBL/SAT

CD-R

MD/TAPE

TUNER

V-AUX

POWER

1

5

9

6

10

0

10

100

11 12

78

234

++

1

2

3

4

5

6

7

8

0

w

e

r

t

9

q

y

u

i

o

p

d

g

f

s

j

k

h

a

Remote Control

This section describes the controls and their functions of

the remote control. See “REMOTE CONTROL

FEATURES” on pages 37 to 49 for operating other

components with this remote control.

1 Infrared window

Outputs infrared control signals. Aim this window at the

component you want to operate.

2 RE-NAME

Used for changing the input source name in the display

window (see page 42).

3 TRANSMIT indicator

Flashes while the remote control is sending signals.

4 STANDBY

Sets this unit in the standby mode.

5 SYSTEM POWER

Turns on the power of this unit.

6 Display window

Shows the selected source component that you are

controlling.

7 SOURCE SELECT k/n

Selects the another component to control independently

from the input that has been selected by pressing an input

selector button.

8 LIGHT

Turns the light on or off. When you press this button

once, the light turns on for about ten seconds. Press again

to turn off the light.

9 10KEY/DSP

Selects the numeric button (10KEY) mode or DSP mode.

0 Operation buttons

Provides functions such as play, stop, skip, etc. for

operating your other components selected by the input

selector buttons.

q 6.1/ES

Turns on or off the Dolby Digital Matrix 6.1 or DTS ES

decoder with 10KEY/DSP set to the DSP position.

w LEVEL

Selects the effect speaker channel to be adjusted and sets

the level.

e ON SCREEN

Selects the on-screen display (OSD) mode for your video

monitor.

r SLEEP

Sets the sleep timer.

t TEST

Outputs the test tone to adjust the speaker levels.

y CLEAR

Used for clearing functions acquired when using the learn

and rename features, programmed macros, and set

manufacturer codes (see pages 42 to 44).

u LEARN

Used for setting up the manufacturer code or for

programming the functions of other remote controls (see

pages 38 and 39).

7

English

INTRODUCTION PREPARATION

BASIC

OPERAIONT

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

CONTROLS AND FUNCTIONS

BASS

SPEAKERS

A

BASS

EXTENSION

PROCESSOR

DIRECT

B

VOLUME

INPUT

INPUT MODE

VIDEO AUX

SILENT

SET MENU

PHONES

6CH

INPUT

OPTICAL

STANDBY

/

ON

NATURAL SOUND AMPLIFIER

TREBLE REC OUT

– +

DIGITAL

V-AUX

VCR2

/DVR

VCR1

PHONO

EFFECT

CD

TUNER

MD/TAPE

DVD

SOURCE

D-TV/LD

CBL/SAT

CD-R

– +

PROGRAM

STEREO

–

+

30°30°

Approximately 6 m (20 feet)

i MACRO

Used to program a series of operations for control by a

single button (see pages 40 to 42).

o MACRO ON/OFF

Turns the macro function on and off.

p Å and ı

Switch the control area for the extra components that are

not connected to this unit without changing the input.

a Input selector buttons

Select the input source and change the control area.

s 6CH INPUT

Selects the source connected to the 6CH INPUT jacks.

d DSP program/Numeric buttons

Select DSP programs or numbers according to the

position of 10KEY/DSP.

f MUTE

Mutes the sound. The MUTE indicator turns on when the

MUTE function is on. Press again to restore the audio

output to the previous volume level.

g VOLUME +/–

Increases or decreases the volume level.

h STEREO/EFFECT

Switches the normal stereo or DSP effect reproduction.

When STEREO is selected, 2-channel input signals are

directed to the main left and right speakers without effect

sounds. All Dolby Digital and DTS audio signals except

for the LFE channel are also directed to the main left and

right speakers.

j PARAMETER/SET MENU

Selects the PARAMETER mode or SET MENU mode.

k Cursor buttons k/n/–/+

Select and adjust DSP program parameters and SET

MENU items according to the position of PARAMETER/

SET MENU.

Using the Remote Control

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

■ Handling the remote control

• Do not spill water or other liquids on the remote

control.

• Do not drop the remote control.

• Do not leave or store the remote control in the

following types of conditions:

– high humidity or temperature such as near a heater,

stove or bath;

– dusty places; or

– in places subject to extremely low temperatures.

8

CONTROLS AND FUNCTIONS

RL

LCR

RC RR

LFE

VIRTUAL

DTS

Neo

MOVIE THEATER

ENTERTAINMENT12

:6

DOLBY DIGITAL

PRO

LOGIC

VCR DVD TUNER CD

PHONO

CD RV AUX

DSP

DISCRETE

PCM

1

SILENT

SP

DIGITAL

VCR2/DVR

CBL

/

SAT

MD

/

TAPE

TV

/

LD

P. DIRECT

BASS

MUTE VOLUME

SLEEP

D

6.1

/

ES

PRO LOGIC

/

AB

67 0 q wer

12 345

89

1 Processor indicators

When any function of

DSP

, DTS, DISCRETE,

VIRTUAL, g,

6.1

/

ES

, and

PRO LOGIC

/

is

activated, its indicator lights up.

2 Input source indicator

Shows the current input source with a cursor.

3 SLEEP indicator

Lights up while the sleep timer is on.

4 MUTE indicator

Flashes up while the MUTE function is on.

5 VOLUME level indicator

Indicates the volume level.

6 v indicator

Lights up when this unit is reproducing PCM (pulse code

modulation) digital audio signals.

7 Headphones indicator

Lights up when headphones are connected.

8 SP A B indicators

Lights up according to which set of main speakers is

selected. Both indicators light up when both sets of

speakers are selected.

9 SILENT indicator

Lights up when headphones are connected with the sound

effect (see “SILENT CINEMA DSP” on page 29).

0 DSP program indicators

The name of the selected DSP program lights up when

the ENTERTAINMENT, MOVIE THEATER 1, MOVIE

THEATER 2 or V/DTS SURROUND DSP program is

selected.

q Multi-information display

Shows the current DSP program name and other

information when adjusting or changing settings.

w BASS indicator

Lights up while BASS EXTENSION is on.

e P. DIRECT

Lights up while PROCESSOR DIRECT is on.

r Input channel indicator

Indicates the channel components of input signals being

received.

Front Panel Display

9

English

INTRODUCTION PREPARATION

BASIC

OPERAIONT

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

CONTROLS AND FUNCTIONS

IMPEDANCE SELECTOR

SET BEFORE POWER ON

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

AC OUTLETS

RS-232C

+

6ΩMIN. /SPEAKER

4ΩMIN. /SPEAKER

8ΩMIN. /SPEAKER

16ΩMIN. /SPEAKER

SWITCHED 100W MAX. TOTAL

COMPONENT VIDEO

PRE OUT/MAIN IN

MAIN OUT

Y

P

R

/C

R

P

B

/C

B

DVD

MONITOR

OUT

DVD

IN

VCR 1

OUT

IN

VCR 2

/DVR

OUT

TUNER

S VIDEO VIDEO

D-TV

/LD

CBL

/SAT

D-TV

/LD

MAIN IN

REAR (SURROUND)

SUB

WOOFER

CENTER

SPEAKERS

REARCENTER

MAIN

+

–

+

–

+

–

+

–

REAR

CENTER

(SURROUND)

REAR

CENTER

VIDEO

VIDEOS VIDEO

AUDIO

DIGITAL INPUT

GND

6CH INPUT

CENTER

MAIN

SURROUND

AUDIODIGITAL OUTPUT

MONITOR

OUT

PHONO

CBL

/SAT

CD

D-TV

/LD

DVD

CD-R

MD/

TAP E

CD

OPTICAL

COAXIAL

SUB

WOOFER

CD

OUT (REC)

CD-R

IN (PLAY)

OUT (REC)

MD/TAPE

IN (PLAY)

R

L

R

L

R

L

R

L

R

L

R

L

R

L

AB

1

2

3

4

5

6

7

8

3

A

B

4

3

4

1

2

12 3 4 5 6

782 9 0q

(Europe model)

1 DIGITAL OUTPUT jacks

2 Audio component jacks

See pages 16 and 17 for connection information.

3 Video component jacks

See pages 14 and 15 for connection information.

4 PRE OUT/MAIN IN jacks

See page 18 for connection information.

5 RS232C terminal

This is a control expansion terminal for commercial use.

Consult your dealer for details.

6 AC INLET (Europe model only)

Use this inlet to plug in the supplied power cord.

7 DIGITAL INPUT jacks

8 6CH INPUT jacks

See page 18 for connection information.

9 Speaker terminals

See pages 11 and 12 for connection information.

0 IMPEDANCE SELECTOR switch

Use this switch to match the amplifier output to your

speaker impedance (see page 13). Set this unit in the

standby mode before you change the setting of this

switch.

q AC OUTLETS

Use these outlets to supply power to your other A/V

components (see page 19).

Rear Panel

10

SPEAKER SETUP

Speakers to Be Used

This unit has been designed to provide the best sound-

field quality with a 6-speaker system, using left and right

main speakers, left and right rear speakers, and a center

and rear center speakers. If you use different brands of

speakers (with different tonal qualities) in your system,

the tone of a moving human voice and other types of

sound may not shift smoothly. We recommend that you

use speakers from the same manufacturer or speakers

with the same tonal quality.

The main speakers are used for the main source sound

plus the effect sounds. They will probably be the speakers

from your present stereo system. The rear speakers are

used for the effect and surround sounds, and the center

speaker is for the center sounds (dialog, vocals, etc.).

The main speakers should be high-performance models

and have enough power-handling capacity to accept the

maximum output of your audio system. The other

speakers do not have to be equal to the main speakers. For

precise sound localization, however, it is ideal to use the

models of equivalent performance with the main

speakers.

■ Use of a subwoofer expands your

sound field

It is also possible to further expand your system with the

addition of a subwoofer. The use of a subwoofer is

effective not only for reinforcing bass frequencies from

any or all channels, but also for reproducing the LFE

(low-frequency effect) channel with high fidelity when

the Dolby Digital signal or the DTS signal is played back.

The YAMAHA Active Servo Processing Subwoofer

System is ideal for natural and lively bass reproduction.

PREPARATION

Speaker Placement

Refer to the following diagram when you place the

speakers.

■ Main speakers

Place the left and right main speakers an equal distance

from the ideal listening position. The distance of each

speaker from each side of the video monitor should be the

same.

■ Center speaker

Align the front face of the center speaker with the front

face of your video monitor. Place the speaker as close to

the monitor as possible, such as directly over or under the

monitor and centrally between the main speakers.

Note

• If the center speaker is not used, the center channel sound will

be heard from the left and right main speakers. In this case,

“1A CENTER SP” on the SET MENU is set to NONE (see

page 51 for details).

■ Rear speakers

Place these speakers behind your listening position,

facing slightly inwards, nearly 1.8 m (6 feet) above the

floor.

■ Rear center speaker

Place the rear center speaker in the center between the left

and right rear speakers at the same height from the floor

as the rear speakers.

■ Subwoofer

The position of the subwoofer is not so critical, because

low bass sounds are not highly directional. But it is better

to place the subwoofer near the main speakers. Turn it

slightly toward the center of the room to reduce the wall

reflections.

CAUTION

Use magnetically shielded speakers. If this type of

speakers still creates the interference with a monitor,

place the speakers away from the monitor.

Main

speaker (L)

1.8 m (6 feet)

Rear speaker (L)

Rear center

speaker

Rear speaker (R)

Subwoofer

Main speaker (R)Center speaker

11

English

INTRODUCTION

PREPARATION

BASIC OPERA-

TION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

SPEAKER SETUP

12

Connecting the Speakers

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are

faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound

will be unnatural and lack bass.

CAUTION

• Use speakers with the specified impedance shown on the rear panel of this unit.

• Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could

damage this unit and/or speakers.

If necessary, use the SET MENU to change the speaker mode settings according to the number and size of the speakers

in your configuration after you finish connecting your speakers.

■ Speaker cables

A speaker cord is actually a pair of insulated cables

running side by side. One of the cables is colored or

shaped differently, perhaps with a stripe, groove or ridge.

1 Remove approximately 10 mm (3/8”) of

insulation from each of the speaker cables.

2 Twist the exposed wires of the cable

together to prevent short circuits.

■ Connecting to the SPEAKERS terminals

1 Unscrew the knob.

2 Insert one bare wire into the hole in the side

of each terminal.

3 Tighten the knob to secure the wire.

10 mm (3/8”)

■ MAIN SPEAKERS terminals

One or two speaker systems can be connected to these terminals. If you use only one speaker system, connect it to either

of the MAIN A or B terminals.

■ REAR SPEAKERS terminals

A rear speaker system can be connected to these terminals.

■ CENTER SPEAKER terminals

A center speaker can be connected to these terminals.

■ REAR CENTER SPEAKER terminals

A rear center speaker can be connected to these terminals.

Red: positive (+)

Black: negative (–)

3

1

2

12

SPEAKER SETUP

IMPEDANCE SELECTOR

SET BEFORE POWER ON

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

AC OUTLETS

RS-232C

+

6ΩMIN. /SPEAKER

4ΩMIN. /SPEAKER

8ΩMIN. /SPEAKER

16ΩMIN. /SPEAKER

SWITCHED 100W MAX. TOTAL

COMPONENT VIDEO

PRE OUT/MAIN IN

MAIN OUT

Y

P

R

/C

R

P

B

/C

B

DVD

MONITOR

OUT

DVD

IN

VCR 1

OUT

IN

VCR 2

/DVR

OUT

S VIDEO VIDEO

D-TV

/LD

CBL

/SAT

D-TV

/LD

MAIN IN

REAR (SURROUND)

SUB

WOOFER

CENTER

SPEAKERS

REARCENTER

MAIN

+

–

+

–

+

–

+

–

REAR

CENTER

(SURROUND)

REAR

CENTER

VIDEO

VIDEOS VIDEO

AUDIO

DIGITAL INPUT

GND

6CH INPUT

CENTER

MAIN

SURROUND

AUDIODIGITAL OUTPUT

MONITOR

OUT

PHONO

CBL

/SAT

CD

D-TV

/LD

DVD

CD-R

MD/

TAP E

CD

OPTICAL

COAXIAL

SUB

WOOFER

CD

OUT (REC)

CD-R

IN (PLAY)

OUT (REC)

MD/TAPE

IN (PLAY)

R

L

R

L

R

L

R

L

R

L

R

L

R

L

AB

1

2

3

4

5

6

7

8

3

A

B

4

3

4

1

TUNER

2

1

45 6 7

23

Subwoofer

system

Rear Center

speaker

Main B speaker

Center

speaker

(Europe model)

Right

Rear speaker

Right Left

Main A speaker

Right Left

Left

4

5

3

1

2

7

6

The diagram above shows the speaker layout in the listening room.

■ SUBWOOFER jack

When using a subwoofer with built-in amplifier, including the YAMAHA Active Servo Processing Subwoofer System,

connect the input jack of the subwoofer system to this jack. Low bass signals distributed from the main, center and/or

rear channels are directed to this jack if they are assigned to this jack. (The cut-off frequency of this jack is 90 Hz.) The

LFE (low-frequency effect) signals generated when Dolby Digital or DTS is decoded are also directed if they are

assigned to this jack.

Notes

• Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level by using the

remote control of this unit (see ADJUSTING THE LEVEL OF THE EFFECT SPEAKERS on page 61).

• Depending on the settings of “1 SPEAKER SET” and “10 LFE LEVEL” on the SET MENU, some signals may not be output from

the SUBWOOFER jack.

13

English

INTRODUCTION

PREPARATION

BASIC OPERA-

TION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

SPEAKER SETUP

AC OUTLETS

+

6ΩMIN. /SPEAKER

4ΩMIN. /SPEAKER

8ΩMIN. /SPEAKER

16ΩMIN. /SPEAKER

SWITCHED 100W MAX. TOTAL

SET BEFORE POWER ON

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

IMPEDANCE SELECTOR

SET BEFORE POWER ON

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

REAR :

REAR CENTER :

CENTER

:

MAIN A OR B

:

A B :

+

6ΩMIN. /SPEAKER

4ΩMIN. /SPEAKER

8ΩMIN. /SPEAKER

16ΩMIN. /SPEAKER

IMPEDANCE SELECTOR

Switch

position

Upper

Lower

Speaker

Main

Center

Rear

Center

Rear

Main

Center

Rear

Center

Rear

Impedance level

If you use one set of main speakers, the impedance of

each speaker must be 4 Ω or higher.

If you use two sets of main speakers, the impedance of

each speaker must be 8 Ω or higher.

The impedance must be 4 Ω or higher.

The impedance must be 6 Ω or higher.

The impedance of each speaker must be 6 Ω or higher.

If you use one set of main speakers, the impedance of

each speaker must be 8 Ω or higher.

If you use two sets of main speakers, the impedance of

each speaker must be 16 Ω or higher.

The impedance must be 8 Ω or higher.

The impedance of each speaker must be 8 Ω or higher.

IMPEDANCE

SELECTOR

switch

(Europe model)

■ IMPEDANCE SELECTOR switch

WARNING

Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit

may be damaged.

If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR

switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the

standby mode.

Select the left and right position according to the impedance of the speakers in your system. Be sure to move this switch

only when this unit is in the standby mode.

14

CONNECTIONS

Before Connecting Components

CAUTION

Never connect this unit and other components to mains power until all connections between components have been

completed.

• Be sure all connections are made correctly, that is to say L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. Some

components require different connection methods and have different jack names. Refer to the operation instructions

for each component to be connected to this unit.

• When you connect other YAMAHA audio components (such as a tape deck, MD recorder and CD player or

changer), connect them to the jack with the same number labels as !, #, $ etc. YAMAHA applies this labeling

system to all its products.

• After you have completed all connections, check them again to make sure they are correct.

Connecting Video Components

■ About the video jacks

There are three types of video jacks. Video signals input through the VIDEO jacks are the conventional composite video

signals. Video signals input through the S VIDEO jacks are separated into luminance (Y) and color (C) video signals.

The S-video signals achieve high-quality color reproduction. Video signals input through the COMPONENT VIDEO

jacks are separated into luminance (Y) and color difference (P

B

/C

B

, P

R

/C

R

) video signals. The jacks are also separated

into three for each signal. The description of the component video jacks may be different depending on the component

(e.g. Y, C

B

, C

R

/Y, P

B

, P

R

/Y, B-Y, R-Y etc.). Component video signals provide the best quality in picture reproduction.

If your video component has an S-video output or component video output, you can connect it to this unit. Connect the

S-video signal output jack on your video component to the S VIDEO jack or connect the component signal output jacks

on your video component to the COMPONENT VIDEO jacks.

y

• Each type of video jack works independently. Signals input through the composite

video, S-video and component jacks are output through the corresponding composite

video, S-video, and component jacks, respectively.

• You can designate the input for the COMPONENT VIDEO A and B jacks according

to your component by using “7 I/O ASSIGNMENT” on the SET MENU (see pages

56 and 57 for details).

Notes

• Use a commercially available S-video cable when connecting to the S VIDEO jack, and commercially available video cables when

connecting to the COMPONENT VIDEO jacks.

• When you are using the COMPONENT VIDEO jacks, check the details in the owner’s manual that came with the component being

connected.

■ VIDEO AUX jacks (on the front panel)

These jacks are used to connect any video input source

such as a game console and a video camera to this unit.

S VIDEO VIDEO

L AUDIO R OPTICAL

VIDEO AUX

AUDIO OUT R

AUDIO OUT L

VIDEO OUT

OPTICAL OUT

S VIDEO OUT

O

V

L

R

S

Game console or video camera

COMPONENT VIDEO

S VIDEO VIDEO

P

R

/ C

R

P

B

/ C

B

Y

VIDEO jack

(composite)

COMPONENT

VIDEO jacks

S VIDEO

jack

15

English

INTRODUCTION

PREPARATION

BASIC OPERA-

TION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

CONNECTIONS

DIGITAL INPUT

GND

6CH INPUT

CENTER

MAIN

SURROUND

AUDIODIGITAL OUTPUT

PHONO

CD

CD-R

MD/

TAPE

CD

OPTICAL

SUB

WOOFER

CD

OUT (REC)

CD-R

IN (PLAY)

OUT (REC)

MD/TAPE

IN (PLAY)

R

L

1

2

3

4

7

3

4

3

4

1

D-TV

/LD

DVD

5

6

COAXIAL

CBL

/SAT

8

VIDEO

MONITOR

OUT

S VIDEO

DVD

IN

VCR 1

OUT

IN

VCR 2

/DVR

OUT

D-TV

/LD

CBL

/SAT

VIDEOS VIDEO

R

L

VIDEOAUDIO COMPONENT VIDEO

Y

P

R

/C

R

P

B

/C

B

DVD

MONITOR

OUT

D-TV

/LD

A

B

TUNER

2

S VIDEO

OUTPUT

S VIDEO

OUTPUT

S VIDEO

OUTPUT

S VIDEO

INPUT

VIDEO

INPUT

S VIDEO

OUTPUT

AUDIO

OUTPUT

AUDIO

OUTPUT

AUDIO INPUT

AUDIO OUTPUT

COAXIAL

OUTPUT

OPTICAL

OUTPUT

RF

OUTPUT

OPTICAL

OUTPUT

VIDEO

OUTPUT

AUDIO

OUTPUT

VIDEO

OUTPUT

RF

INPUT

VIDEO

OUTPUT

VIDEO

INPUT

COMPONENT

INPUT

COMPONENT

OUTPUT

COMPONENT

OUTPUT

L

R

C

*1

S VIDEO

INPUT

VIDEO

L

R

L

R

V

S

C

O

L

R

S

L

R

O

VIDEO

OUTPUT

V

S

S S

V

S

L

S

R

V

C

O

(Europe model)

LD player

RF

demodulator

*1 If your LD player has an RF

OUTPUT jack, first connect it to

the RF INPUT on an RF

demodulator and then connect

the RF OUTPUT on an RF

demodulator to the COAXIAL

jack on this unit.

indicates S-video cables

indicates video cables

indicates coaxial cables

indicates optical cables

indicates right analog cables

indicates left analog cables

indicates signal direction

Video monitor

VCR 1 or VCR 2/

DVR (digital

video recorder)

Cable TV or

Satellite tuner

DVD player

TV/digital TV or

LD player

16

CONNECTIONS

Connecting Audio Components

■ Connecting to digital jacks

This unit has digital jacks for direct transmission of

digital signals through either coaxial or fiber optic cables.

You can use the digital jacks to input PCM, Dolby Digital

and DTS bitstreams. When you connect components to

both the COAXIAL and OPTICAL jacks, priority is given

to the input signals from the COAXIAL jack. All digital

input jacks are acceptable for 96-kHz sampling digital

signals.

y

• You can designate the input for each digital jacks according to

your component by using “7 I/O ASSIGNMENT” on the SET

MENU (see pages 56 and 57 for details).

Note

• The OPTICAL jacks on this unit conform to the EIA standard.

If you use a fiber optic cable that does not conform to this

standard, this unit may not function properly.

■ Connecting a turntable

PHONO jacks are for connecting a turntable with an MM

or high-output MC cartridge. If you have a turntable with

a low-output MC cartridge, use an in-line boosting

transformer or MC-head amplifier when connecting to

these jacks.

y

• Connect your turntable to the GND terminal to reduce noise in

the signal. However you may hear less noise without the

connection to the GND terminal for some record players.

■ Connecting a CD player

y

• The COAXIAL CD and OPTICAL CD jacks are available for a

CD player which has coaxial or optical digital output jacks.

• When you connect a CD player to both the COAXIAL CD and

OPTICAL CD jacks, priority is given to the input signals from

the COAXIAL CD jack.

■ Connecting an MD recorder, tape

deck or CD recorder

y

• DIGITAL OUTPUT jacks and analog OUT (REC) are

independent. Only digital signals are output from DIGITAL

OUTPUT jacks and analog signals from OUT (REC) jacks.

• When you connect your recording component to both the

analog and digital input and output jacks, the priority is given

to the digital signal.

Notes

• When you connect a recording component to this unit, keep its

power on while using this unit. If the power is off, this unit may

distort the sound from other components.

• When you record from a source component connected to this

unit while this unit is set in the standby mode, the recorded

sound may be distorted. To avoid this problem, turn on this

unit.

17

English

INTRODUCTION

PREPARATION

BASIC OPERA-

TION

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

APPENDIX

CONNECTIONS

DIGITAL INPUT

D-TV

/LD

DVD

5

6

COAXIAL

CBL

/SAT

8

VIDEO

MONITOR

OUT

S VIDEO

DVD

IN

VCR 1

OUT

IN

VCR 2

/DVR

OUT

D-TV

/LD

CBL

/SAT

VIDEOS VIDEO

R

L

VIDEOAUDIO COMPONENT VIDEO

Y

P

R

/C

R

P

B

/C

B

DVD

MONITOR

OUT

D-TV

/LD

A

B

MD/

TAPE

2

1

CD-R

OPTICAL

CENTER

MAIN

SURROUND

SUB

WOOFER

PHONO

CD

OUT (REC)

CD-R

IN (PLAY)

3

4

1

OUT (REC)

MD/TAPE

IN (PLAY)

R

L

3

4

AUDIO

6CH INPUT

GND

CD-R

CD

3

4

CD

7

TUNER

2

L

R

OUTPUT

GND

L

R

L R

INPUT OUTPUT INPUTOUTPUT

OUTPUT

COAXIAL

OUTPUT

R

L

R

OPTICAL

OUTPUT

OPTICAL

INPUT

OPTICAL

INPUT

OPTICAL

OUTPUT

SUBWOOFER

OUTPUT

CENTER

OUTPUT

MAIN

OUTPUT

SURROUND

OUTPUT

L

R

C

O

L R

O

DIGITAL OUTPUT

L

R

C

O

(Europe model)

indicates coaxial cables

indicates optical cables

indicates right analog cables

indicates left analog cables

indicates signal direction

External decoder

See page 18

Turntable

CD player

CD recorder

MD recorder or

tape deck

18

CONNECTIONS

Connecting to an External

Amplifier

If you want to increase the power output to the speakers,

or want to use another amplifier, connect an external

amplifier to the PRE OUT/MAIN IN jacks as follows.

Note

• When RCA pin plugs are connected to the PRE OUT/MAIN

IN jacks for output to an external amplifier, it is not necessary

to use the corresponding SPEAKERS terminals.

1 MAIN OUT/IN jacks

MAIN OUT jacks .... Main channel line output jacks.

The signals output through these

jacks are affected by VOLUME,

BASS, TREBLE, and BASS

EXTENSION settings.

MAIN IN jacks ........ Line input to this unit’s Main

channel amplifiers.

When connecting to these jacks, signals input to the

preamplifier of this unit will not be output from the main

amplifier of this unit.

2 REAR CENTER jack

Rear center channel line output jack.

3 CENTER jack

Center channel line output jack.

4 SUBWOOFER jack

When using a subwoofer with built-in amplifier, including

the YAMAHA Active Servo Processing Subwoofer

System, connect the input jack of the subwoofer system

to this jack. Low bass signals distributed from the main,

center and/or rear channels are directed to this jack if they

are assigned to this jack. (The cut-off frequency of this

jack is 90 Hz.) The LFE (low-frequency effect) signals

generated when Dolby Digital or DTS is decoded are also

directed if they are assigned to this jack.

Notes

• Adjust the volume level of the subwoofer with the control on

the subwoofer. It is also possible to adjust the volume level by

using the remote control of this unit (see ADJUSTING THE

LEVEL OF THE EFFECT SPEAKERS on page 61).

• Depending on the settings of “1 SPEAKER SET” and “10 LFE

LEVEL” on the SET MENU, some signals may not be output

from the SUBWOOFER jack.

5 REAR (SURROUND) jacks

Rear channel line output jacks.

PRE OUT/MAIN IN

MAIN OUT MAIN IN

REAR (SURROUND)

SUB

WOOFER

CENTER

REAR

CENTER

R

L

R

L

1 2

3 45

Connecting an External Decoder

This unit is equipped with 6 additional input jacks (left

and right MAIN, CENTER, left and right SURROUND

and SUBWOOFER) for discrete multi-channel input from

an external decoder, sound processor or pre-amplifier.

Connect the output jacks on your external decoder to the

6CH INPUT jacks. Be sure to match the left and right

outputs to the left and right input jacks for the main and

surround channels.

Notes

• When you select 6CH INPUT as the input source, this unit

automatically turns off the digital sound field processor, and

you cannot listen to DSP programs.

• When you select 6CH INPUT as the input source, settings of

“1 SPEAKER SET” on the SET MENU do not apply (except

for 1F MAIN LEVEL).

La pagina sta caricando ...

Yamaha DSP-AX3200 Manuale utente

Yamaha DSP-AX3200 Manuale utente

in altre lingue

Documenti correlati

Altri documenti