LG F14W8TDN0H Manuale utente

DWG.

No.

TRIG.

DR COMPLETED

LG Electronics Inc.

UNIT SCALE

N

S

mm

REVIEWEDDESIGNED

RELATED DWG.

CHECKED APPROVED

24.06.2016

MODELING

I

T

L

E

T

APPROVEDPREPAREDDATEREF. NO.REV. NO. REVISION DESCRIPTION

1

2

3

4

RELEASING THIS DRAWING

WITHOUT PERMISSION LG

Electronics SHOULD BE

ACCUSED ACCORDING TO THE

LAWS AND COMPANY RULES.

PDF

ILLUSTRATOR

148 148

210

MFL69515315

MANUAL,OWNER’S

DRUM-EXPORT 1/1

MFL69515315

1. Material, printing and exterier size are refer to work tables.

2. Printing, text size and line are based on LG design film.

3. Exterier size on the drawing is cutting line.

4. Before product controlled by criteria sample.

WORK

BRAND

LG

01

MODEL

MFL69515315

P/NO.

1

A**QEDG

LANGUAGE

220

PAGE

REMARK

SEC.

should comply with LG standard of LG(63)-A-5501-34

F14G7QDN0H

F H/1 *G6/G7 Q/T D(N)(W)(0~9)(H)

ENGLISH

OFFSET WHITE 80 g

LGEWR

A.Walaszczyk

24.06.2016 24.06.2016 24.06.2016

M.Grabek S.Kozłowski N.Kim

A**QWDG

Mega Touch

Washing Machine

F14W7QDN1H

F14W8TDN0H

F14G6QDN2H

GERMAN

SLOVENIAN

FRENCH

ITALIAN

F14G6TDN2H

www.lg.com

OWNER’S MANUAL

WASHING

MACHINE

Before beginning installation, read these instructions carefully.

This will simplify installation and ensure that the product is installed

correctly and safely. Leave these instructions near the product after

installation for future reference.

MFL69515315

Rev.00_09062016

EN ENGLISH DE GERMAN SL SLOVENIAN FR FRENCH IT ITALIAN

F H/1 4 G6/G7 T/Q D(N)(W)(0~9)(H)

F H/1 2 G6/G7 T/Q D(N)(W)(0~9)(H)

F H/1 0 G6/G7 T/Q D(N)(W)(0~9)(H)

F14W7QDN1H, F14W8TDN0H

TABLE OF CONTENTS

This manual may contain images or content

different from the model you purchased.

This manual is subject to revision by the

manufacturer.

SAFETY INSTRUCTIONS ......................................03

Important Safety Instructions ....................................................... 04

Disposal of Your Old Appliance ...................................................07

INSTALLATION .......................................................08

Parts ............................................................................................08

Accessories .................................................................................08

Specifications ..............................................................................09

Installation Place Requirements ..................................................10

Unpacking and Removing Transit Bolts ....................................... 11

Using Anti-Slip Sheets (Optional) ................................................12

Wooden Floors (Suspended Floors) ............................................12

Leveling the Appliance .................................................................13

Connecting the Supply Hose .......................................................13

Installing the Drain Hose .............................................................16

Electrical Connections (In the UK Only) ......................................16

OPERATION ...........................................................17

Using the Washing Machine ........................................................ 17

Sorting Laundry ...........................................................................18

Adding Cleaning Products ...........................................................19

Control Panel ............................................................................... 21

Programme Table ........................................................................22

Option Programme ......................................................................26

SMART FUNCTION ................................................28

Using the Smart Diagnosis™ Function .......................................28

MAINTENANCE ......................................................29

Cleaning Your Washing Machine .................................................29

Cleaning the Water Inlet Filter .....................................................29

Cleaning the Drain Pump Filter ...................................................30

Cleaning the Dispenser Drawer ...................................................31

Tub Clean (Optional) ...................................................................31

Caution on Freezing During Winter .............................................32

TROUBLESHOOTING ............................................34

Diagnosing Problems ..................................................................34

Error Messages ...........................................................................37

WARRANTY ............................................................39

OPERATING DATA .................................................42

03

SAFETY INSTRUCTIONS

The following safety guidelines are intended to prevent unforeseen risks or

damage from unsafe or incorrect operation of the product.

The guidelines are separated into ‘WARNING’ and ‘CAUTION’ as described

below.

This symbol is displayed to the indicate matters and operations that

can cause risk. Read the part with this symbol carefully and follow the

instructions in order to avoid risk.

WARNING

- This indicates that the failure to follow the instructions

can cause serious injury or death.

CAUTION

- This indicates that the failure to follow the instructions

can cause the minor injury or damage the product.

To reduce the risk of re, electric shock, or injury to persons when using

your product, basic safety precautions should be followed, including the

following:

Children in the Household

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge,

unless they have been given supervision or instruction concerning use of the

appliance by a person responsible for their safety. Children should be supervised to

ensure that they do not play with the appliance.

For Use in Europe:

This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction concerning use of

the appliance in a safe way and understand the hazards involved. Children shall

not play with the appliance. Cleaning and user maintenance shall not be made by

children without supervision.

Children of less than 3 years should be kept away unless continuously supervised.

WARNING

EN

04

Important Safety Instructions

To reduce the risk of re, electric shock, or injury to persons when using

your product, basic safety precautions should be followed, including the

following:

Installation

•

Never attempt to operate this appliance if it is damaged, malfunctioning, partially

disassembled, or has missing or broken parts, including a damaged cord or plug.

•

This appliance should only be transported by two or more people holding the

appliance securely.

•

Do not install the appliance in a damp and dusty place. Do not install or store the

appliance in any outdoor area, or any area that is subject to weathering conditions

such as direct sunlight, wind, rain, or temperatures below freezing.

•

Tighten the drain hose to avoid separation.

•

If the power cord is damaged or the hole of the socket outlet is loose, do not use

the power cord and contact an authorized service centre.

•

This appliance must not be installed behind a lockable door, a sliding door or a

door with a hinge on the opposite side to that of the appliance, in such a way that

a full opening of the appliance door is restricted.

•

Do not plug multiple socket outlets, an extension power cable or adapter with this

appliance.

•

This appliance must be grounded. In the event of malfunction or breakdown,

grounding will reduce the risk of electric shock by providing a path of least

resistance for electric current.

•

This appliance is equipped with a power cord having an equipment-grounding

conductor and a grounding power plug. The power plug must be plugged into an

appropriate socket outlet that is installed and grounded in accordance with all local

codes and ordinances.

•

Improper connection of the equipment-grounding conductor can result in risk of

electric shock. Check with a qualied electrician or service personnel if you are in

doubt as to whether the appliance is properly grounded.

•

Do not modify the power cord provided with the appliance.If it does not t the

outlet, have a proper outlet installed by a qualied electrician.

WARNING

EN

05

Operation

•

Do not use a sharp object like drill or pin to press or separate an operation unit.

•

Do not repair or replace any part of the appliance. All repairs and servicing must

be performed by qualied service personnel unless specically recommended in

this Owner’s Manual. Use only authorized factory parts.

•

Keep the area underneath and around your appliances free of combustible

materials such as lint, paper, rags, chemicals, etc.

•

Do not put animals, such as pets into the appliance.

•

Do not leave the appliance door open. Children may hang on the door or crawl

inside the appliance, causing damage or injury.

•

Use new hose or hose-set supplied with the appliance. Reusing old hoses can

cause a water leak and subsequent property damage.

•

Never reach into this appliance while it is operating. Wait until the drum has

completely stopped.

•

Do not put in, wash or dry articles that have been cleaned in, washed in, soaked

in, or spotted with combustible or explosive substances (such as wax, oil, paint,

gasoline, degreasers, drycleaning solvents, kerosene, vegetable oil, cooking oil,

etc.). Improper use can cause re or an explosion.

•

In case of ood, disconnect the power plug and contact the LG Electronics

customer information centre.

•

Do not push down on the door excessively, when the appliance door is open.

•

Do not touch the door during steam or drying programmes.

•

Do not use ammable gas and combustible substances (benzene, gasoline,

thinner, petroleum, alcohol, etc.) near the appliance.

•

If the drain hose or supply hose is frozen during winter, use it only after thawing.

•

Keep all washing detergents, softener and bleach away from children.

•

Do not touch the power plug or the appliance controls with wet hands.

•

When pulling out the power plug from an outlet, hold the power plug, not the cable.

•

Do not bend the power cable excessively or place a heavy object on it.

•

Do not wash rugs, mats, shoes or pet blankets, or any other items other than

clothes or sheets, in this machine.

EN

06

•

This appliance must only be used for domestic household purposes and should

not be used in mobile applications.

•

If there is a gas leakage (isobutane, propane, natural gas, etc.), do not touch the

appliance or power plug and ventilate the area immediately.

Maintenance

•

Securely plug the power plug in the socket outlet after completely removing any

moisture and dust.

•

Disconnect the power cord before cleaning the appliance.

•

Never unplug the appliance by pulling on the power cable. Always grip the power

plug rmly and pull straight out from the socket outlet.

•

Do not spray the water inside or outside the appliance to clean it.

Disposal

•

Before discarding an old appliance, unplug it. Cut off the cable directly behind the

appliance to prevent misuse.

•

Dispose of all packaging materials (such as plastic bags and styrofoam) away from

children. The packaging material can cause suffocatoions.

•

Remove the door before disposing of or discarding this appliance to avoid the

danger of children or small animals getting trapped inside.

EN

07

Disposal of Your Old Appliance

•

This crossed-out wheeled bin symbol indicates that waste electrical and

electronic products (WEEE) should be disposed of separately from the

municipal waste stream.

•

Old electrical products can contain hazardous substances so correct

disposal of your old appliance will help prevent potential negative

consequences for the environment and human health. Your old appliance

may contain reusable parts that could be used to repair other products,

and other valuable materials that can be recycled to conserve limited

resources.

•

You can take your appliance either to the shop where you purchased

the product, or contact your local government waste ofce for details of

your nearest authorised WEEE collection point. For the most up to date

information for your country please see www.lg.com/global/recycling.

EN

08

INSTALLATION

Parts

Transit bolts

Power plug

Drawer

Control panel

Drum

Door

Drain hose

Drain plug

Drain pump lter

Cover cap

(Location may

vary depending on

products)

Adjustable feet

Accessories

Cold supply hose (1EA)

(Option: Hot (1EA))

Spanner Anti–slip sheets (Optional)

EN

09

Model

F H/1 4 G6/G7 Q/T D(N)(W)(0~9)(H)

Wash Capacity 7/8 kg

Power Supply 220 - 240 V~, 50 Hz

Size 600 mm (W) x 550 mm (D) x 850 mm (H)

Product Weight 60 kg

Permissible Water pressure 0.1 - 1.0 MPa (1.0 - 10.0 kgf / cm²)

•

ve the quality of the product.

•

The external hot water supply MUST NOT exceed 65°C

•

ter supply.

F H/1 2 G6/G7 Q/T D(N)(W)(0~9)(H)

F H/1 0 G6/G7 Q/T D(N)(W)(0~9)(H)

F14W7QDN1H, F14W8TDN0H

EN

10

Installation Place Requirements

Location

10

cm

2

cm

2

cm

Level Floor :

Allowable slope under the entire appliance

is 1°.

Power Outlet : Must be within 1.5 meters of either side

of the location of the appliance.

•

Do not overload the outlet with more than one

appliance.

Additional Clearance : For the wall, 10 cm: rear

/2 cm: right & left side

•

Do not place or store laundry products on top of the

appliance at any time.

•

These products may damage the nish or controls.

WARNING

•

The plug must be plugged into an appropriate outlet

that is properly installed and grounded in accordance

with all local codes and ordinances.

Positioning

•

Install the appliance on a at hard oor.

•

Make sure that air circulation around the appliance is

not impeded by carpets, rugs, etc.

•

Never try to correct any unevenness in the oor with

pieces of wood, cardboard or similar materials under

the appliance.

•

If it is impossible to avoid positioning the appliance

next to a gas cooker or coal burning stove, an

insulation (85x60 cm) covered with aluminum foil on

the side facing the cooker or stove must be inserted

between the two appliances.

•

Do not install your appliance in rooms where freezing

temperatures may occur. Frozen hoses may burst

under pressure. The reliability of the electronic control

unit may be impaired at temperatures below freezing

point.

•

Ensure that when the appliance is installed, it is

easily accessible for an engineer in the event of a

breakdown.

•

With the appliance installed, adjust all four feet

using the transit bolt spanner provided to ensure the

appliance is stable, and a clearance of approximately

20 mm is left between the top of the appliance and the

underside of any work-top.

•

If the appliance is delivered in winter and temperatures

are below freezing, place the appliance at room

temperature for a few hours before putting it into

operation.

WARNING

•

This equipment is not designed for maritime use or for

use in mobile installations such as caravans, aircraft

etc.

Electrical Connection

•

Do not use an extension cord or double adapter.

•

Always unplug the appliance and turn off the water

supply after use.

•

Connect the appliance to an earthed socket in

accordance with the current wiring regulations.

•

The appliance must be positioned so that the plug is

easily accessible.

•

Repairs to the appliance must only be carried out

by qualied personnel. Repairs carried out by

inexperienced persons may cause injury or serious

malfunctioning. Contact your local service centre.

EN

11

Unpacking and Removing Transit

Bolts

1

Lift the appliance off the foam base.

•

After removing the carton and shipping material,

lift the appliance off the foam base. Make sure

the tub support comes off with the base and is

not stuck to the bottom of the appliance.

•

If you must lay the appliance down to remove

the carton base, always protect the side of the

appliance and lay it carefully on its side. Do not

lay the appliance on its front or back.

Tub support

(Optional)

Carton base

2

Remove the bolt assemblies.

•

Starting with the bottom two transit bolts, use the

spanner (included) to fully loosen all transit bolts

by turning them counterclockwise. Remove the

bolt assemblies by wiggling them slightly while

pulling them out.

Retainer

Shipping

bolt

3

Install the hole caps.

•

Locate the hole caps included in the accessory

pack and install them in the shipping bolt holes.

Cap

NOTE

•

Save the bolt assemblies for future use. To prevent

damage to internal components, Do not transport the

washing machine without reinstalling the transit bolts.

•

Failure to remove transit bolts and retainers may

cause severe vibration and noise, which can lead to

permanent damage to the washing machine. The cord

is secured to the back of the washing machine with

a shipping bolt to help prevent operation with transit

bolts in place.

EN

12

Using Anti-Slip Sheets (Optional)

If you install the appliance on a slippery surface, it may

move because of excessive vibration. Incorrect leveling

may cause malfunction through noise and vibration. If

this occurs, install the anti-slip sheets under the leveling

feet and adjust the level.

1

Clean the oor to attach the anti-slip sheets.

•

Use a dry rag to remove and clean foreign

objects and moisture. If moisture remains, the

anti-slip sheets may slip.

2

Adjust the level after placing the appliance in the

installation area.

3

Place the adhesive side of the anti-slip sheets on

the oor.

•

It is most effective to install the anti-slip sheets

under the front legs. If it is difcult to place the

pads under the front legs, place them under the

back legs.

This side up

Adhesive side

4

Ensure the appliance is level.

•

Push or rock the top edges of the appliance

gently to make sure that the appliance does not

rock. If the appliance rocks, level the appliance

again.

NOTE

•

You can obtain anti-slip sheets from the LG Service

Centre.

Wooden Floors (Suspended

Floors)

•

Wooden oors are particularly susceptible to vibration.

•

To reduce vibration we recommend you place rubber

cups at least 15 mm thick under each foot of the

appliance, secured to at least two oor beams with

screws.

Rubber cup

•

If possible install the appliance in one of the corners of

the room, where the oor is more stable.

•

Fit the rubber cups to reduce vibration.

NOTE

•

Proper placement and leveling of the washing machine

will ensure long, regular, and reliable operation.

•

The washing machine must be 100% horizontal and

•

It must not ‘Seesaw’ across corners under the load.

•

wax and other lubricant coatings.

•

Do not let the feet of the washing machine get wet.

Failure to do so may cause vibration or noise.

•

You can obtain rubber cups from

the LG Service Centre.

EN

13

Leveling the Appliance

If the oor is uneven, turn the adjustable feet as required

(Do not insert pieces of wood etc. under the feet). Make

sure that all four feet are stable and resting on the oor

and then check that the appliance is perfectly level (Use

a spirit level).

•

Once the appliance is level, tighten the lock nuts up

towards the base of the appliance. All lock nuts must

be tightened.

Raise

Lock nut

Lower

Tighten all 4

lock nuts securely

Diagonal Check

•

When pushing down the edges of the top plate

diagonally, the appliance should not move up and

down at all (Check both directions). If the appliance

rocks when pushing the machine top plate diagonally,

adjust the feet again.

NOTE

•

Timber or suspended type ooring may contribute to

excessive vibration and unbalance.

•

If the washing machine is installed on a raised

platform, it must be securely fastened in order to

eliminate the risk of falling off.

Connecting the Supply Hose

•

Water supply pressure must be between 0.1 MPa and

1.0 MPa (1.0‒10.0 kgf/cm

2

).

•

Do not strip or crossthread when connecting supply

hose to the valve.

•

If the water supply pressure is more than 1.0 MPa, a

decompression device should be installed.

•

Periodically check the condition of the hose and

replace the hose if necessary.

Checking the Rubber Seal on the Supply

Hose

Two rubber seals are supplied with the water supply

hoses.

They are used for preventing water leaks. Make sure the

connection to taps is sufciently tight.

Hose connector

Rubber seal

Hose connector

Rubber seal

EN

14

Connecting Hose to Water Tap

Connecting Screw-Type Hose to Tap with

Thread

Screw the hose connector onto the water supply tap.

Connecting Screw-Type Hose to Tap Without

Thread

1

Loose the four xing screws.

Upper

connector

Rubber

seal

Fixing screw

2

Remove the guide plate if the tap is too large to t

the adapter.

Guide plate

3

Push the adapter onto the end of the tap so that

the rubber seal forms a watertight connection.

Tighten the four xing screws.

4

Push the supply hose vertically upwards so that the

rubber seal within the hose can adhere completely

to the tap and then tighten it by screwing it to the

right.

Plate

Supply

hose

Connecting One Touch Type Hose to Tap

Without Thread

1

Unscrew the adapter ring plate and loose the four

xing screws.

Ring plate

2

Remove the guide plate if the tap is too large to t

the adapter.

Guide plate

EN

15

3

Push the adapter onto the end of the tap so that

the rubber seal forms a watertight connection.

plate .

4

Pull the connector latch plate down, push the

supply hose onto the adapter, and release the

connector latch plate. Make sure the adapter locks

into place.

Latch plate

NOTE

•

After connecting the supply hose to the water tap,

(dirt, sand, sawdust, and etc.) in the water lines. Let

the water drain into a bucket, and check the water

temperature.

Connecting Hose to Appliance

Attach the cold water line to the cold

water supply on the back of the washer.

NOTE

•

After completing connection, if water leaks from the

hose, repeat the same steps.

Use the most conventional type of tap for the water

supply. In case the tap is square or too big, remove

the guide plate before inserting the tap into the

adaptor.

Using the Horizontal Tap

Horizontal tap

Extension tap

Square tap

Cold

water

supply

EN

16

Installing the Drain Hose

•

The drain hose should not be placed higher than 100

cm above the oor. Water in the appliance may not

drain or may drain slowly.

•

Securing the drain hose correctly will protect the oor

from damage due to water leakage.

•

If the drain hose is too long, do not force it back into

the appliance. This will cause abnormal noise.

about 100 cm

about 145 cm

about 105 cm

•

When installing the drain hose to a sink, secure it

tightly with string.

•

Securing the drain hose correctly will protect the oor

from damage due to water leakage.

Laundry tub

Hose

retainer

T

ie strap

Electrical Connections (In the UK

Only)

The wires in the mains lead are coloured in accordance

with the following code:

Green and Yellow: Earth

Blue: Neutral

Brown: Live

This appliance must be earthed.

Green and

Yellow (Earth)

Brown (Live)

Blue (Neutral)

Fuse

Cord grip

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug, proceed

as follows:

The green and yellow wire must be connected to the

terminal in the plug which is marked with the letter E or

by the earth symbol (

) or coloured Green or Green

and Yellow.

The blue wire must be connected to the terminal which

is marked with the letter N or coloured Black.

The brown wire must be connected to the terminal which

is marked with the letter L or coloured Red.

If a 13 amp (BS 1363) plug is used, t a 13 amp BS

1362 fuse.

max. 100 cm

EN

17

OPERATION

Using the Washing Machine

Before the rst wash, select a washing programme,

allow the washing machine to wash without clothing.

This will remove residue and water from the drum that

may have been left during manufacturing.

1

Sort laundry and load items.

•

Sort laundry by fabric type, soil level, colour and

load size as needed. Open the door and load

items into the washing machine.

2

Add cleaning products and/or detergent and

softener.

•

Add the proper amount of detergent to the

detergent dispenser drawer. If desired, add

bleach or fabric softener to the appropriate areas

of the dispenser.

3

Turn on the washing machine.

•

Press the Power button to turn on the washing

machine.

4

Choose the desired washing cycle.

•

Press the cycle button repeatedly or turn the

cycle selector knob until the desired cycle is

selected.

5

Begin cycle.

•

Press the Start/Pause button to begin the cycle.

The washing machine will agitate briey without

water to measure the weight of the load. If the

Start/Pause button is not pressed within 5

minutes, the washing machine will shut off and

all settings will be lost.

6

End of cycle.

•

When the cycle is nished, a melody will sound.

Immediately remove your clothing from the

washing machine to reduce wrinkling. Check

around the door seal when removing the load for

small items that may be caught in the seal.

EN

18

Sorting Laundry

1

Look for a care label on your clothes.

•

This will tell you about the fabric content of your

garment and how it should be washed.

•

Symbols on the care labels.

Wash temperature

Normal machine wash

Permanent press

Delicate

Hand wash

Do not wash

2

Sorting laundry.

•

To get the best results, sort clothes into loads

that can be washed with the same wash cycle.

•

Different fabrics need to be washed at varying

temperatures and spin speeds.

•

Always sort dark colours from pale colours and

whites. Wash separately as dye and lint transfer

can occur causing discolouration of white and

pale garments. If possible, do not wash heavily

soiled items with lightly soiled ones.

– Soil (Heavy, Normal, Light) :

Separate clothes according to amount of soil.

– Colour (White, Lights, Darks):

Separate white fabrics from coloured fabrics.

– Lint (Lint producers, Collectors):

Wash lint producers and lint collectors

separately.

3

Caring before loading.

•

Combine large and small items in a load. Load

large items rst.

•

Large items should not be more than half the

total wash load. Do not wash single items. This

may cause an unbalanced load. Add one or two

similar items.

•

Check all pockets to make sure that they are

empty. Items such as nails, hair clips, matches,

pens, coins and keys can damage both your

washing machine and your clothes.

•

Close zippers, hooks and strings to make sure

that these items don’t snag on other clothes.

•

Pre-treat dirt and stains by brushing a small

amount of detergent dissolved water onto stains

to help lift dirt.

•

Check the folds of the exible gasket (gray) and

remove any small articles.

CAUTION

•

Check inside the drum and remove any items from a

previous wash.

•

Remove any clothing or items from the exible gasket

to prevent clothing and gasket damage.

EN

19

Adding Cleaning Products

Detergent Dosage

•

Detergent should be used according to the instruction

of the detergent manufacturer and selected according

to type, colour, soiling of the fabric and washing

temperature.

•

If too much detergent is used, too many suds can

occur and this will result in poor washing results or

cause heavy load to the motor.

•

If you wish to use liquid detergent follow the guidelines

provided by the detergent manufacturer.

•

You can pour liquid detergent directly into the

main detergent drawer if you are starting the cycle

immediately.

•

Do not use liquid detergent if you are using Time

delay, or if you have selected Pre Wash, as the liquid

may harden.

•

If too many suds occur, reduce the detergent amount.

•

Detergent usage may need to be adjusted for water

temperature, water hardness, size and soil level of the

load. For best results, avoid oversudsing.

•

Refer to the label of the clothes, before chooseing the

detergent and water temperature.

•

When using the washing machine, use designated

detergent for each type of clothing only:

– General powdered detergents for all types of fabric

– Powdered detergents for delicate fabric

– Liquid detergents for all types of fabric or

designated detergents only for wool

•

For better washing performance and whitening, use

detergent with the general powdered bleach.

•

Detergent is ushed from the dispenser at the

beginning of the cycle.

NOTE

•

Do not let the detergent harden. Doing so may lead to

blockages, poor rinse performance or odour.

•

Full load : According to manufacturer’s

recommendation.

•

Part load : 3/4 of the normal amount

•

Minimum load : 1/2 of full load

Adding Detergent and Fabric Softener

Adding Detergent

•

Main wash only →

•

Pre wash+Main wash →

NOTE

•

Too much detergent, bleach or softener may cause an

overow.

•

Be sure to use the appropriate amount of detergent.

Adding Fabric Softener

•

Do not exceed the maximum ll line. Overlling can

cause early dispensing of the fabric softener, which

may stain clothes. Close the dispenser drawer slowly.

EN

La pagina sta caricando ...

LG F14W8TDN0H Manuale utente

LG F14W8TDN0H Manuale utente

in altre lingue

Documenti correlati

Altri documenti