Coldmachine Safety instructions
15
!WARNING!
• This device may only be installed and repaired by a qualified
technician. Inadequate repairs can lead to considerable hazards.
Should your device need to be repaired, please contact customer
services.
• Do not operate the device if it is visibly damaged.
• Do not open the refrigerant circuit under any circumstances. An
exception to this is when the device has to be disconnected for return
shipping (chapter “Installing the external temperature regulator” on
page 22).
• Set up the device in a dry location where it is protected against splash-
ing water.
• Do not place the device near naked flames or other heat sources
(heaters, direct sunlight, gas ovens etc.).
• Make sure that the compressor is sufficiently ventilated.
•Electronic devices are not toys!
Always keep and use the device out of the reach of children.
• People (including children) whose physical, sensory or mental
capacities or whose lack of experience or knowledge prevent them
from using this product safely should not use it without the supervision
or instruction of a responsible person.
• Before you start up the device for the first time, check that the
operatingvoltage matches the battery voltage (see type plate).
• If the connection cable is damaged, it must be replaced to prevent
possible electrical hazards. Only replace a damaged connection
cable with a connection cable of the same type and specifications.
• Do not store any explosive substances, such as spray cans with
propellants in the device.
Coldmachine-IO-16s.book Seite 15 Dienstag, 8. Mai 2018 2:06 14