IBM ThinkPad 22P7007 Manuale utente

ThinkPad CD-RW/DVD-ROM

ComboUltrabaySlimDrive

User’s Guide



ThinkPad CD-RW/DVD-ROM

ComboUltrabaySlimDrive

User’s Guide



ATTENTION

Before installing this product, read the ThinkPad System Safety Booklet.

Note

Be sure to keep your proof of purchase, because it might be required for warranty

services. See Appendix A, “Warranty Information”, on page 11.

First Edition (February 2003)

US Government Users Restricted Rights – Use, duplication or disclosure restricted by

GSA ADP Schedule Contract with IBM Corp.

Contents

Safety: Read first ....................v

Chapter 1. About the CD-RW/DVD drive ............1

Product registration ....................1

Product description ....................1

Installationrequirements..................2

Installing the drive ....................2

Locatingthedrivecontrols .................2

Chapter 2. Using the CD-RW/DVD drive ............3

Beforeyoubegin.....................3

Handlingandcaringforadisc................3

Caring for the CD-RW/DVD drive ...............4

Loading a disc......................5

Manually ejecting a disc ..................5

Using the DVD function ..................6

Enabling the DMA setting .................6

Installing WinDVD and viewing a DVD movie ..........7

Starting WinDVD ....................8

Using the CD-R and CD-RW function ..............8

BackingupaCD.....................9

Problemsolving.....................9

Appendix A. Warranty Information ..............11

Warranty period .....................11

Service and support ..................11

IBM Statement of Limited Warranty - Z125-4753-06 8/2000 ......13

Part1-GeneralTerms..................13

Items Not Covered by Warranty ..............14

Part 2 - Country-unique terms ...............16

Appendix B. Notices ...................25

Trademarks......................26

Electronic emission notices ................26

iv ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

Safety: Read first

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety

Information.

Avant d’installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette

produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Pred inštaláciou tohto zariadenia si pečítaje Bezpečnostné predpisy.

Antes de instalar este producto lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

vi ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

Chapter 1. About the CD-RW/DVD drive

This manual provides information on registering, installing, and using the

IBM

®

ThinkPad

®

CD-RW/DVD-ROM Combo Ultrabay

™

Slim Drive, and is

available on the Software and User’s Guide CD in the following languages:

vEnglish

vFrench

vGerman

vItalian

vJapanese

vSpanish

vBrazilian Portuguese

vSimplified Chinese

vTraditional Chinese

The appendixes of this guide contain warranty information and legal notices.

Product registration

Thank you for purchasing this IBM product. Take a few moments to register

your product and provide information that will help us to better serve you in

the future. Your feedback helps us develop better products and services, and

helps us develop better ways to communicate with you. Register your option

on the http://www.ibm.com/pc/register/ IBM Web site.

You will receive information and updates on your registered product unless

you indicate on the Web site that you do not want to receive further

information.

Product description

The IBM ThinkPad CD-RW/DVD Combo Ultrabay Slim Drive can write to and

read from CD-RW and CD-Recordable (CD-R) discs, and can read

mass-produced, stamped CDs and DVDs. This drive can also read DVD-RAM,

DVD-R, and DVD-RW formatted media.

The drive writes to CD-R and CD-RW discs at different speeds. CD-R media

can be written at 24X Max speeds, while CD-RW media can be written and

rewritten at 10X Max speeds. CD media can be read at 24X Max speeds, while

DVD media can be read at 8X Max speeds. This drive also features buffer

underrun protection which helps minimize recording errors.

In addition to this book, you should have received the following:

vCD-RW/DVD drive

vCarrying case

vSoftware and User’s Guide CD

vLaser Safety Guide

vQuick Reference Guide

Note: Your kit might also contain an update diskette for IBM DVD or CD-RW

software.

Contact your place of purchase if an item is missing or damaged. Be sure to

retain your proof of purchase. It might be required to receive warranty service.

See “Service and support” on page 11 for technical support information.

Installation requirements

To install the CD-RW/DVD drive, your ThinkPad computer must contain the

following requirements:

vA ThinkPad Dock, ThinkPad UltraBase X2 media slice, IBM Portable Drive

Bay 2000, or IBM ThinkPad X3 UltraBase

vWindows XP or Windows 2000 operating system

Notes:

1. IBM offers limited support for computers with Windows 95, 98, ME, or NT

operating systems.

2. The ThinkPad A21e computer does not support DVD playback under

Windows NT.

Installing the drive

Your ThinkPad computer includes a help system, Access ThinkPad, that

provides drive installation instructions specific to your computer. To correctly

install the CD-RW/DVD drive into the Ultrabay 2000 drive bay, use the

instructions given in the Access ThinkPad help system.

Locating the drive controls

Please refer to the ThinkPad user’s guide for instructions on locating the drive

controls.

2ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

Chapter 2. Using the CD-RW/DVD drive

This section provides information on how to handle, load, and care for DVDs

and CDs and how to care for your CD-RW/DVD drive.

Before you begin

For best results, review the following guidelines before using the drive:

vDo not move your ThinkPad computer while formatting or writing a disc as

this might cause data errors. Also, minimize typing while formatting or

writing to a disc, as this might also cause data errors.

vKeep the ThinkPad computer on a flat surface when writing to a disc.

vMake sure the ThinkPad computer is plugged into an ac outlet when using

the drive. The disc might be damaged if the battery runs out while writing

to a disc.

vTurn screensavers off. Using a screensaver might interrupt the formatting

and writing process.

vDo not put your ThinkPad computer into hibernation or suspend mode

while writing to a disc.

Note: The read and write results of the drive depend upon the quality and

characteristics of the DVD or CD media used.

Handling and caring for a disc

Carefully handle and clean discs, especially writable media types such as CD-R

and CD-RW discs, so that they remain readable. You can prolong the life of

your discs by using the following precautions:

vAlways store CD ROMs in their original packaging

vAlways store CD ROMs out of direct sunlight

vAlways store CD ROMs away from direct heat sources

vRemove CD ROMs from the computer when not in use

vCheck CD ROM for cracks BEFORE each use

vDO NOT force CD ROMs into the computer/packaging

vDO NOT bend or flex CD ROMs

IMPORTANT: DO NOT use CD ROMs that are cracked.

Attention: Wiping a disc using a circular motion can cause data loss.

vHandle a disc by the edges or the center hole. Do not touch the surface of a

disc.

vTo remove dust or fingerprints, wipe a disc from the center to the edge with

a soft, lint-free cloth.

vDo not write on the surface of a disc.

vDo not place a disc in direct sunlight.

vDo not use commercial cleaners to clean a disc.

vDo not bend a disc.

Caring for the CD-RW/DVD drive

To protect your drive during operation, observe the following precautions:

vRemove the disc from the drive before moving the drive.

vDo not insert foreign objects into the drive.

vDo not stack objects on the drive.

vDo not remove the drive cover or attempt to service the drive.

vDo not operate the drive under any of the following conditions:

– High temperature, high humidity, or direct sunlight

– Excessive vibration, sudden shock, or inclined surface

– Excessive dust

4ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

Loading a disc

1. Press the Eject button. The tray slides out of the drive.

2. Place a disc in the tray with the label facing up.

3. Close the tray by gently pushing the tray in until it latches.

Attention: Do not use force or insert foreign objects to open the tray. If your tray does

not open when you press the Eject button, see “Manually ejecting a disc” for more

information.

Manually ejecting a disc

If you press the Eject button and the tray does not slide out, turn off the

computer and straighten a large paper clip to form a tool, as shown in the

illustration. The straightened end must extend at least 45 mm (1.8 in.). Insert

the extended end into the manual-eject hole on the front of the drive. Push the

paper clip until the tray opens. Gently pull out the tray until you can remove

the disc.

45 mm

1.8 in

Chapter 2. Using the CD-RW/DVD drive 5

Using the DVD function

To use the DVD function, you need to set up your computer as follows after

installing the CD-RW/DVD drive into the Ultrabay 2000 drive bay:

1. Enable the DMA setting (Windows XP and Windows 2000 users only).

2. Install WinDVD (the DVD movie player program).

Note: For Windows 95, the DVD movie player is supported by Windows 95

OSR2.0 or later versions. You can check which version of Windows 95

you are using by doing the following:

1. Click Start,movethecursortoSettings, and then click Control

Panel.

2. Double-click System.

Read the numbers under “System”.

v4.00.950B means that your version is Windows 95 OSR2.0 or

OSR2.1.

v4.00.950C means that your version is Windows 95 OSR2.5.

Enabling the DMA setting

This section explains enabling the DMA setting with Windows 2000 and

Windows XP.:

For Windows 2000

1. Click Start,movethecursortoSettings, and click Control Panel.

2. Double-click System.

3. Click the Hardware tab.

4. Click the Device Manager button.

5. Click IDE ATA/ATAPI controller to pull down the submenu.

6. Double-click Secondary IDE. (Double-click Primary IDE if you are using

the ThinkPad A21e computer.)

7. Select the DMA is available as the Transfer Mode.

8. Click OK.

9. Click Close to close System Properties window. A message displays,

informing you that the system settings have changed.

10. Click OK to restart the system.

For Windows XP

1. Click Start,movethecursortoMy Computer, and click on it.

2. Click on View system information under System Tasks.

3. Click the Hardware tab.

4. Click the Device Manager button.

6ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

5. Click IDE ATA/ATAPI controller to pull down the submenu.

6. Double-click Secondary IDE. (Double-click Primary IDE if you are using

the ThinkPad A21e computer.)

7. Click the Advanced Settings tab.

8. Select DMA if available as the Transfer Mode.

9. Click OK.

10. Click Close to close the System Properties window.

Installing WinDVD and viewing a DVD movie

To install WinDVD, go to the ″Software″section of the Software and User’s Guide

CD.

After you install the CD-RW/DVD drive and WinDVD, you can view a DVD

movie. But first you need to set the DVD region code for your DVD content.

DVD region codes

DVD region codes help protect the contents of a DVD. The world is divided

into six regions and specific content can be viewed only in the appropriate

region. For example, content for Region 1 can be viewed only in the U.S. and

Canada. WinDVD is also region–specific.

You can verify the region code of the content by looking at the region code

symbol on the back of the content packaging.

Region code Region

1 U.S., Canada

2 Europe, Middle East, South Africa, Japan

3 Southeast Asia, Taiwan, Korea

4 Latin America, Australia, New Zealand

5 Former Soviet Union, North Africa, India

6 People’s Republic of China

Start WinDVD by inserting the DVD into the drive. The region code is

automatically set and you can view the movie. This is the initial setting.

After the region code has been set, if you insert a DVD with a different region

code, you are prompted to change the region code. You can change the region

code from your initial setting up to four times.

After the region code has been changed from its initial setting four times, it is

fixed and can no longer be changed. Thereafter, you can play DVD content

only from that region.

Chapter 2. Using the CD-RW/DVD drive 7

To display the region code status, click the WinDVD Properties buttononthe

WinDVD user interface. The General tab contains this information.

Starting WinDVD

To start WinDVD, complete the following procedure:

1. Click Start.

2. Click Programs.

3. Click InterVideo WinDVD.

4. Click InterVideo WinDVD to open the DVD movie player window.

For more information on how to play the DVD movie player, refer to the

WinDVD help information on the Software and User’s Guide CD. If you want

to watch a DVD movie on your TV, refer to the online information

provided with your computer.

Notes:

1. Your computer has been configured to provide the highest quality audio

and video playback obtainable with the available system resources. You can

alter the default settings by changing the video resolution setting within the

Control Panel. Some systems do not have enough resources to provide

full-quality audio and video playback at all resolution settings. If you

experience poor playback performance, adjust the resolution to a lower

setting.

2. Audio or video streams are decoded by software. The audio and video

subsystems need to be fully functional and enabled.

Using the CD-R and CD-RW function

The CD-RW/DVD drive can write to both CD-R and CD-RW discs. CD-R discs

cannot be erased, but can be used with standard CD-ROM drives and CD

players.

You can use CD-R discs to record audio tracks, store data, archive files, and

copy files from another CD.

CD-RW discs can be erased and rewritten, but can be used only with newer

MR- and CD-RW-compatible CD-ROM and DVD-ROM drives. You can use

CD-RW discs to back up, store, and update files or to copy files from another

CD.

Notes:

1. CD-R discs are playable on audio CD players. CD-RW discs are not

playable on most audio CD players.

2. The software included with this drive does not enable the drive

CD-recording capabilities with DOS, Windows 3.x, or IBM OS/2

®

operating

systems.

8ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

For more information on using the software, refer to the IBM RecordNow and

IBM DLA help information on the Software and User’s Guide CD.

Backing up a CD

To copy a commercial CD, you must own the copyright or obtain permission

from the copyright owner. If you do not own the copyright or do not obtain

permission from the copyright owner, you might be violating copyright law

and might be subject to payment of damages or other remedies. For more

information on copyright law, consult your legal advisor.

Problem solving

Computer problems can be caused by hardware, software, or user error. The

information in this section might be useful to help you solve problems or to

gather helpful information you can pass on to a service technician. You might

also need to refer to your computer, operating-system, or sound-adapter

publications.

Review the following list for any problem descriptions that might fit your

situation.

You cannot create a multisession disc.

Be sure that there is enough space left on the disc for another session. Writing

a session requires lead-in and lead-out space (about 15 MB) in addition to the

data that is recorded.

You cannot successfully write to a CD-R or CD-RW disc.

Take the following actions:

1. Verify that the process is not being interrupted by a screen saver, an

antivirus program, an Internet or e-mail program, or other software.

Disable the functions that might interrupt the write operation.

2. Verify that the hard disk has been defragmented.

3. Consult the hard disk drive manufacturer or vendor if an older hard disk

drive is conducting a thermal recalibration during a write operation.

4. Replace the CD if it is bad or scratched.

5. Disable the Windows Auto Insert Notify function on your CD-ROM and

CD-RW drives.

Chapter 2. Using the CD-RW/DVD drive 9

You cannot eject a CD.

Take the following actions after ensuring that the drive is not in the process of

writing to a disc:

1. Eject the CD through software.

2. Use the Eject button.

3. Turn off the computer. Wait 45 seconds; then turn on the computer and try

using the Eject button again.

4. If other methods do not work, use the manual-eject hole, using instructions

given in “Manually ejecting a disc” on page 5.

You cannot read from the CD after successfully writing to it.

Take the following actions:

1. If you can read the CD in another CD player or you can see previous

sessions, the directory information might be damaged on the volume,

making it unreadable. To get ideas for troubleshooting, check the

documentation that comes with the software.

2. You might have a damaged CD-R or CD-RW disc. Try a new CD-R disc or

CD-RW disc, or another brand of CD.

3. If you can read from a CD-RW disc in the writing drive, but not in another

MR drive, be sure that a UDF Reader program is installed in the computer.

4. Avoid writing at the slower 1X speed unless required by your computer.

10 ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

Appendix A. Warranty Information

This section contains the warranty period for your product, information about

obtaining warranty service and support, and the IBM Statement of Limited

Warranty.

Warranty period

Contact your place of purchase for warranty service information. Some IBM

Machines are eligible for on-site warranty service depending on the country or

region where service is performed.

Warranty period Service delivery method

Parts - 1 year, labor - 1 year Customer carry-in or mail-in

For information on European Union legal rights under applicable national

legislation governing the sale of consumer goods, see Appendix B, “European

union warranty information” on page 27.

Service and support

The IBM Machine Warranties Web site at

http://www.ibm.com/servers/support/machine_warranties/ contains a

worldwide overview of the IBM Limited Warranty for IBM Machines, a

glossary of terms used in the Statement of Limited Warranty, Frequently Asked

Questions (FAQ), and links to Product Support Web pages. The IBM Statement

of Limited Warranty is available from this Web site in 29 languages in Portable

Document Format (PDF).

Online technical support

Online technical support is available during the life of your product. Online

assistance can obtained through the Personal Computing Support Web site.

Online Technical Support

IBM Personal Computing Web site http://www.ibm.com/pc/support

During the warranty period, assistance for replacement or exchange of

defective components is available. In addition, if your IBM option is installed

in an IBM computer, you might be entitled to service at your location. Your

technical support representative can help you determine the best alternative.

Telephone technical support

Installation and configuration support through the IBM HelpCenter« will be

withdrawn or made available for a fee, at IBM’s discretion, 90 days after the

option has been withdrawn from marketing. Additional support offerings,

including step-by-step installation assistance, are available for a nominal fee.

To assist the technical support representative, have available as much of the

following information as possible:

vOption name

vOption number

vProof of purchase

vComputer manufacturer, model, serial number (if IBM), and manual

vDescription of the problem

vHardware and software configuration information for your system

If possible, be at your computer. Your technical support representative might

want to walk you through the problem during the call.

For the support telephone number and support hours by country, refer to the

following table. If the number for your country or region is not listed, contact

your IBM reseller or IBM marketing representative. Response time may vary

depending on the number and nature of the calls received.

Support 24 hours a day, 7 days a week

Canada (Toronto only) 416-383-3344

Canada (all other) 1-800-565-3344

U.S.A. and Puerto Rico 1-800-772-2227

All other countries and regions Go to http://www.ibm.com/pc/support/

and click Support Phone List

12 ThinkPad CD-RW/DVD-ROM Combo Ultrabay Slim Drive: User’s Guide

La pagina sta caricando ...

IBM ThinkPad 22P7007 Manuale utente

Questo manuale è adatto anche per

IBM ThinkPad 22P7007 Manuale utente

in altre lingue

Documenti correlati

Altri documenti