Crystal Surround Air Track
(Active Speaker System)
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
HW-D450
HW-D451
2
features
This unit features an Active Speaker System that provides high sound quality in a single slim unit.
This unit does not require any satellite loudspeakers or speaker cabling, which are normally associated with
conventional surround sound systems.
The supplied remote control can be used to control the TV connected to this unit.
The remote control has a TV hotkey that enables you to perform various operations with the simple press of a button.
You can select from 7 different sound modes (MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, PASS (Original
Sound)) depending on the type of content you want to enjoy.
This unit employs decoders compatible with Dolby Digital and DTS (Digital Theater Systems).
This is the standard audio signal format used on DVDs and other purely digital media.
This surround technology delivers high-quality digital audio of up to 5.1 discrete channels to produce a
directional and more realistic effect.
DTS provides a discrete 5.1 CH digital audio signal for both music and movie content and uses less
compression than Dolby Digital for richer sound.
Samsung’s wireless module does away with cables running between the main unit and the subwoofer.
Instead, the subwoofer connects to a compact wireless module that communicates with the main unit.
The 3D sound feature adds depth and spaciousness to your listening experience.
3
EnG
The accessories may look slightly different than those pictured above.▪
Check for the supplied accessories below.
(For Subwoofer power cable 1EA)
(Large)
(Small)
(For Audio cable 1EA)
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
4
safety information
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important instructions
accompanying the product.
: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
•
This apparatus shall always be connected to a AC outlet with a protective grounding connection.
•
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains
plug shall be readily operable.
•
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
•
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
5
EnG
Ensure that the AC power supply in your house complies with the identification sticker located on the back of your product. Install your
product horizontally, on a suitable base (furniture), with enough space around it for ventilation (76~102 mm). Make sure the ventilation
slots are not covered. Do not place the
unit
on amplifiers or other equipment which may become hot. This
unit
is designed for continuous
use. In order to disconnect the unit completely from the power supply, remove the main plug from the wall outlet, especially when left
unused for a long period of time.
During thunderstorms, disconnect the AC main plug from the
wall outlet. Voltage peaks due to lightning could damage the unit.
Protect the
product
from moisture (i.e. vases) , and excess heat
(e.g.fireplace) or equipment creating strong magnetic or electric fields
Disconnect the power cable from the AC supply if the unit malfunctions.
Your
product
is not intended for industrial use. Use of this product is for
personal use only.
Condensation may occur if your
product
has been stored in cold tem-
peratures. If transporting the
unit
during the winter, wait approxi
mately 2
hours until the unit has reached room temperature before using.
Do not expose the unit to direct sunlight or other heat sources.
This could lead to overheating and malfunction of the unit.
The batteries used with this product contain chemicals that are harmful to
the environment.
Do not dispose of batteries in the general household trash.
The batteries used with this product contain chemicals that are harmful to
Phones
99.1 mm 99.1 mm
68.6 mm
99.1 mm
6
contents
2
2 Features
3 What’sincluded
4
4 Safetywarnings
5 Precautions
7
7 Beforereadingtheuser’smanual
8
8 Frontpanel
9 Rearpanel
10
10 Touroftheremotecontrol
11
11 Installingthewallmount
12 Connectingthewirelesssubwoofer
13 Attachingthetoroidalferritecoretothe
powercordofthesubwoofer
13 Installingtoroidalferritetosubwoofer
13 Installingferritecoretoaudiocable
14
UseiPod/iPhonewithawirelessdockcradle
foriPod/iPhone(soldseparately(HT-WDC10))
14Howtolinkthewirelesstransmitterwiththe
mainunit
15ConnectingtheCrystalSurroundAirTrack
20
20 Troubleshooting
21
21 Specications
16
16 Basicfunctions
16 Advancedfunctions
19Softwareupgrade
7
EnG
● GEttinG StartEd
Make sure to check the following terms before reading the user manual.
This involves a case where a function does not operate or settings may be
canceled.
This involves tips or instructions on the page that help each function operate.
Be sure to be familiar with Safety Instructions before using this product. (See page 4)
If a problem occurs, check the Troubleshooting. (See page 20)
©2011 Samsung Electronics Co.,Ltd.
All rights reserved; no part or whole of this user’s manual may be reproduced or copied without the prior
written permission of Samsung Electronics Co.,Ltd.
1)
2)
getting started
8
descriptions
Displays the current mode.
Selects the Optical, Audio or W.iPod input.
Selects the sound mode.
(MUSIC, NEWS, DRAMA, CINEMA, SPORTS, GAME, PASS
(Original Sound))
Controls the volume level.
Turns the Crystal Surround Air Track on and off.
When you turn on the power of this unit, there will be a 4 to 5 second delay before it
reproduces sound.
▪
5
4321
9
EnG
● dEScription
You can update this unit's software through the USB port.
Plug the power supply cable into the AC wall outlet.
Connect to the analog output of an external device.
Connect to the digital (optical) output of an external device.
When disconnecting the power cable from the wall outlet, hold the plug.
Do not pull the cable.
Do not connect this unit or other components to the main power until all connections
between components are complete.
▪
▪
ON
LY
FOR UPDA
TE
1
DIGITAL
OPTICA
L
AUD
I
O IN
2
DIGI
TAL
AUDI
O IN 1
3
4
2
10
remote control
The remote control can operate TVs made by SAMSUNG only.
Depending on the TV you are using, you may not be able to operate your TV with this
remote control. In this case, operate the TV using the TV's remote control.
▪
▪
1.
Lift the cover at the back of
the remote control upward as
shown.
2.
Install two AAA size batteries.
Make sure to match the “+” and “–” ends
of the batteries with the diagram inside the
compartment.
3.
Replace the cover.
Assuming typical TV usage,
the batteries last for about
one year.
The remote control can be used up to approximately 23 feet (7 meters) in a straight line. It can also be operated at a
horizontal angle of up to 30° from the remote control sensor.
Turns the Crystal Surround Air
Track on and off.
Adjusts the volume level of the
unit.
Mutes the sound from the
unit. Press again to restore
the sound to the previous
volume level.
Adjusts the Subwoofer level.
Used to help sync video to audio
when connected to a digital TV.
Turns your Samsung TV on
and off.
Synchronizes the Air Track via
Optical connection via the Optical
jack so it turns on automatically
when you turn on your TV.
Selects the sound mode.
(MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME,
PASS (Original Sound))
Switches between the available
TV channels.
Selects the Digital (Optical), the
Audio or the W.iPod input.
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
This button is disabled. If you
press this button, you will see a
message of “NOT AVAILABLE”
on the main unit.
You can control the brightness
of the Display.
You can use this function to
enjoy Dolby Digital sound when
watching movies at low volume
at night (Standard, MAX, MIN).
Regulates and stabilizes the
volume level against a drastic
volume change.
This feature adds depth and
spaciousness to the sound.
Use this to display the TV
channel information.
11
EnG
● connEctionS
You can use the wall mount bracket to mount this unit on a wall.
Do not hang onto the installed unit and avoid any impact to the unit.
Secure the unit rmly to the wall so that it does not fall off. If the unit falls off, it may result in
an injury or damage to the product.
When the unit is installed on a wall, please make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
For the optimal performance in a wall mount installation, keep the speaker system at least
5 cm distant from the TV.
▪
▪
▪
▪
Then, t the unit into the corresponding slots of the wall
mount bracket. For secure installation, make sure the
mounting studs slide rmly down into the bottom of the
slots.
Place the wall mount bracket on a wall surface
and then
secure it with two screws (not supplied).
This is the completion of the suggested wall mount
installation.
connections
Do not install on a place other than a vertical wall.
For the installation, avoid a location with high temperature or humidity, or wall that cannot sustain the
weight of the set.
Check the strength of the wall. If the strength of the wall is insufcient for the product installation, make
sure to reinforce the wall before the installation.
Check the material of the wall. If the wall is made of plaster board, marble, or iron board, purchase and
use the appropriate xing screws.
Cables connecting to external devices need to be connected to the set before installing.
Be sure to turn off and unplug the unit before installation. Otherwise, it may cause electric shock.
•
•
•
•
•
•
1 2
5 cm or more
12
The Subwoofer's linking ID is preset at the factory and the main unit and sub should link (connect wirelessly)
automatically when main unit is turned on. If the link indicator does not light when main unit and subwoofer are
turned on, please set the ID by following the process below.
Before moving or installing the product, be sure to turn off the power and disconnect the power
cord.
If the main unit is powered off, the wireless subwoofer will be in the standby mode and the
STANDBY LED on the upper side will come on after 30 seconds Link indicator (Blue LED)
blinking.
If you use a device that uses the same frequency (5.2GHz or 5.8GHz) near the system, some
sound interruption may be heard due to interference.
The transmission distance of the wireless signal between the main unit and sub is about 33 ft.,
but may vary depending on your operating environment. If a steel-concrete or metallic wall is
between the main unit and the wireless subwoofer, the system may not operate at all, because
the wireless signal cannot penetrate metal.
If the main unit doesn't make wireless connection, follow steps 1-4 above to retry the
connection between the main unit and wireless subwoofer.
The wireless receiving antenna is built into the wireless subwoofer. Keep the unit away from
water and moisture.
For optimal listening performance, make sure that the area around the wireless subwoofer
location is clear of any obstructions.
▪
▪
▪
▪
▪
▪
▪
Plug the power cords of the main unit and subwoofer into an AC power supply.
Press the button on the back of the subwoofer with a small, pointed object for 5 seconds.
The STANDBY indicator is turned off and the LINK indicator (Blue LED) blinks quickly.
•
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
While the main unit is powered off (
STANDBY
mode), press
on the remote control for 5 seconds.
The Power Indicator on the main unit lights off and on, then
returns to mode.
The main unit and the subwoofer are now linked (connected).
The Link indicator (blue LED) on the subwoofer is turned on.
You can enjoy better sound from the wireless subwoofer by
selecting the sound mode. (See page 17)
•
•
•
STANDBY
LINK
13
EnG
● connEctionS
attacHinG tHE toroidaL fErritE corE to tHE poWEr cord of
tHE SuBWoofEr
If you attach a Toroidal ferrite core to the power cord of the Subwoofer,
it will help to prevent RF interference from radio signals.
Pull the fi xing tab of the Toroidal ferrite core to open it.
Make three loops in the power cable of the subwoofer.
Attach the Toroidal ferrite core to the Subwoofer power cord as the
fi gure shows and press it until it clicks.
inStaLLinG toroidaL fErritE to SuBWoofEr
Lift up to release the lock and open the core.
Make three rounds on the coil with the power cable.
(Start winding at 5-10cm away from the switch)
Close the lock back.
inStaLLinG fErritE corE to audio caBLE
Lift up to release the lock and open the core.
Place the audio cable on the opened core.
Close the lock back.
14
You can enjoy ner quality of music through the speaker by sending iPod/iPhone’s audio signal using a
Wireless Transmitter.
To link the main unit with wireless transmitter, you have to make ID setting when both main unit and wireless
transmitter are standby.
Turn on the main unit and connect the iPod/iPhone to the Wireless transmitter.
Then press button on the remote control to select "W iPod" mode.
The mode of the main unit will switches as follows.
Repeatedly press DIGI.1
➡
DIGI.2
➡
ANALOG
➡
W iPod
(See page 18)
The Sound bar will not be turned off if iPod/iPhone is not connected to the Wireless Transmitter.
For more information on HT-WDC10, refer to the HT-WDC10’s user manual.
“Made for iPod,” and “Made for iPhone” mean that an electronic
accessory has been designed to connect speci cally to iPod or
iPhone, respectively, and has been certi ed by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards. Please note that the use of this
accessory with iPod or iPhone may affect wireless performance.
iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered
in the U.S. and other countries.
The volume control may not be operated normally except at the referred models. If there is any error
happened at the models above, please update the software of iPod/iPhone at the lastest version.
▪
▪
▪
Turn off your Home Theater (HW-D450, HW-D451).
Press the hold button on the remote control for 5
seconds. The standby light on the HW-D450, HW-D451 will blink once.
Connect the iPod/iPhone to the Wireless transmitter.
Turn on the iPod/iPhone. Press the button on the back
of the Wireless transmitter for 5 seconds. The link light on the
wireless transmitter will blink fast.
Turn on your Home Theater(make sure the wireless transmitter's Link
LED in ON). To listen to music from your iPod/iPhone over the Home
Theater, select the iPod mode as the Home Theater's source.
You can control the speaker volume of iPod/iPhone with a
volume wheel or a volume bar.
When iPod/iPhone is stopped or in a power saving mode, a
Wireless transmitter is turned to the Sleep Mode.
When iPod/iPhone is turned to the Deep Sleep Mode, the
Wireless transmitter is off.
•
•
Set an ID of the Subwoofer before setting a Transmitter ID. ( See page 12 )
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
STANDBY
LINK
CHARGE
If you use the main unit nearby a wireless device such as a laptop computer, an AP, or Wifi ,
any unstable operation error can happen.
Do not pairing the subwoofer and iPod/iPhone at the same time. If you pairing at the same
time, iPod/iPhone and subwoofer may not connect to the Sound bar.
▪
▪
15
EnG
● connEctionS
This section explains two ways (digital and analog) of connecting the unit to the TV.
This unit is equipped with two optical digital jacks and one audio analog jack for connecting a TV.
Connect AUDIO IN on the main unit to the AUDIO OUT of
the TV or Source Device.
Be sure to match connector colors.
Connect the Digital Input on the main unit to the OPTICAL OUT of
the TV or Source Device
.
Do not connect the power cord of this product or your TV to the wall outlet until all
connections between components are
complete.
Before moving or installing this product, be sure to turn off the power and disconnect the
power cord.
If you select 'ANALOG' without connecting the Audio Cable, the set is turned off automatically
after 20 minutes.
If a TV or any device connected to Air Track with the optical cable is off and there is no
digital input, the Air Track is turned off after 20 minutes. (If there has been no input signal
for over 20 minutes from DIGITAL AUDIO IN 1 or 2, the Air Track will be turned off.)
When Air Track isn't linked with HT-WDC10 model in the W.iPod mode, Air Track will turn
off after 20 minutes.
▪
▪
▪
▪
▪
ON
LY
FOR UPDA
TE
DIGITAL
OPTICA
L
AUD
I
O IN
2
DIGI
TAL
AUDI
O IN 1
AUDIO IN
AUDIO
OUT
L
R
OPTICAL
OUT
Red
White
DIGITAL AUDIO IN 1,2
16
.
Touch ( ) on the front panel.
or,
Press on the remote control to turn on the power.
.
Touch ( ) on the front panel.
or,
Press on the remote control again to turn off the power.
Touch on the front panel.
or,
Press on the remote control to increase or decrease the
volume level.
The numeric value of the volume level appears in the front panel display.
The volume level increases or decreases when you press VOLUME +/–.
If you want to enjoy the sound only from the Crystal Surround Air Track,
you must turn off the TV's speakers in the Audio Setup menu of your
TV. Refer to the owner's manual supplied with your TV.
•
▪
▪
functions
This is useful when answering a doorbell or telephone call.
.
Press ( ) on the remote control to mute the sound.
.
Press on the remote control again (or press +/–) to
restore the sound.
The 3D sound feature adds depth and spaciousness to the sound by using
button.
Press on the remote control.
Each time the button is pressed, the selection changes as follows :
3D SOUND ON ➡ 3D SOUND OFF
When you turn on the 3D Depth Sound, the Sound Mode will
automatically change to PASS.
•
▪
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
17
EnG
● functionS
You can select from 7 different sound modes (MUSIC, NEWS, DRAMA,
CINEMA, SPORTS, GAME, PASS (Original Sound)) depending on the type of
sources you want to enjoy.
Press on the remote control
SOUND
MODE
,
SOUND
MODE
or touch (
SOUND
MODE
)
on the front panel repeatedly to select the sound mode you want.
Select mode if you want to enjoy the original sound.
It is recommended that you select a Sound Mode based on the
source material and your personal taste.
When you choose the Sound Mode (except PASS), the 3D
Depth Sound will automatically be turned OFF.
.
Press on the remote control of this unit.
.
Press on the remote control to display the TV channel information.
.
Press on the remote control to select the TV channel.
The remote control can operate TVs made by SAMSUNG only.
The Crystal Surround Air Track is automatically turned on when you turn the
power on of a TV or any device connected to the Air Track with the optical cable.
Press on the remote control of this unit.
Auto power link function turns on and off each time you press
POWER LINK ON
POWER LINK OFF
If a TV or any device connected to Air Track with the optical
cable is off and there is no digital input, the Air Track is turned
off after 20 minutes.
•
▪
▪
▪
•
▪
You can control the base volume with S/W Level button on the Remote
control.
.
Press the button on the Remote control.
.
is appeared on the Display.
.
Press on the key if you want to increase the subwoofer
volume. You can set it from SW+01 to SW+06.
.
Press on the key if you want to decrease the subwoofer
volume. You can set it from SW-01 to SW-06.
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
18
Video may look slower than the audio if it is connected with digital TV.
If this occurs, adjust the audio delay time to match the video.
Press . button on the remote control of this unit.
You can use + , - button to set the audio delay time between 0 ms and
300 ms.
This feature balances the range between the loudest and quietest sounds.
You can use this function to enjoy Dolby Digital sound when watching
movies at low volume at night.
Press on the remote control of this unit.
Each time the button is pressed, the selection changes as follows :
DRC MIN ➡ DRC STANDARD ➡ DRC MAX
This feature control the brightness of the Display.
Press on the remote control of this unit.
Each time the button is pressed, the selection changes as follows :
DIMMER ON ➡ DIMMER OFF
This will regulate and stabilize the volume level against a drastic volume
change in case of a channel change or scene transition.
Press on the remote control of this unit.
Each time the button is pressed, the selection changes as follows :
SMART VOLUME ON ➡ SMART VOLUME OFF
•
•
•
•
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
You can select either Optical Digital, Audio input or W.iPod input.
Press on the remote control
SOUND
MODE
,
SOUND
MODE
or touch
(
SOUND
MODE
)
on the front panel repeatedly to select the Optical Digital, Audio input
or W.iPod input.
DIGI.1
DIGI.2
ANALOG
W.iPod
Although it appears on the input mode display, iPod connection is
not possible with this model. It is only available with model HT-
WDC10 (sold separately)
▪
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
POWER
TV POWER
AUDIO
MUTE
TV INFO
AUTO
POWER
AV SYNC
AH59-02330A
VOL
TV
CH
SOUND
MODE
3D
SOUND
S.VOL
INPUT
SELECT
DIMMER
S/W LEVEL
HDMISPK CONTROL
DRC
19
EnG
● functionS
Insert a USB drive containing the rmware upgrade into the USB port on the back of the main unit.
Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The
main unit will turn off automatically after completing the rmware upgrade.
When software is upgraded, settings you have made will return to their default (factory) settings. We recommend
you write down your settings so that you can easily reset them after the upgrade.
If the rnware fails to upgrade, we recommend formatting the USB data in FAT16 and trying again.
For upgrading purposes, do not format USB data in NTFS because it is not a supported le system.
Depending on the manufacturer, the USB may not be supported.
▪
▪
▪
▪
▪
Samsung may offer upgrades for the Crystal Surround
Air Track's system's rmware in the future.
Please visit Samsung.com or contact the Samsung call center
to receive information about downloading upgrades and
using a USB drive.
Upgrades will be possible by connecting a USB drive to the
USB port located on your Air Track.
ON
LY
FOR UPDA
TE
ONLY
FOR UPDA
TE
20
Before requesting service, please check the following.
• Is the power cord plugged
into the outlet?
• Connect the power plug to
the outlet.
• Is there static electricity in
the air?
• Disconnect the power plug
and connect it again.
• Is the unit properly
connected to your TV?
• Is the Mute function on?
• Is the volume set to
minimum?
• Connect it correctly.
• Press the Mute button to
cancel the function.
• Adjust the volume.
• Is the TV connected
properly?
• Connect it correctly.
• Are the batteries drained?
• Is the distance between
remote control and main
unit too far?
• Replace with new batteries.
• Operate at a close distance.
• Are the left/right audio
output cables from the TV
connected properly?
• Check the left/right channel
and connect it/them
correctly.
troubleshooting
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
in altre lingue
- English: Samsung HW-D450 User manual
Documenti correlati
-
Samsung HW-D570 Manuale utente
-
-
-
-
Samsung HW-C450 Manuale utente
-
Samsung Crystal Surround Air Track HW-F450 Manuale utente
-
-
Samsung HW-F751 Manuale utente
-
Samsung HW-F850 Manuale utente
-