2
Table of Contents
Chapter 1: Safety Information
Precautions ...............................................................3
Warning ...................................................................3
Product ....................................................................3
Power and Plug .......................................................3
Power Cord and Signal Cable .................................3
Use Environment .....................................................3
Cleaning ..................................................................3
Hanging the TV Set on the Wall ...............................3
Chapter 2: Connections and Setup
TV Buttons ................................................................4
Initial Setup ...............................................................4
Sockets ......................................................................5
Remote Control Functions ......................................6
Installing Batteries ...................................................6
Exclusive Remote Control .......................................7
How to Use the Remote Control................................7
Installing Batteries ...................................................7
Network Connection .................................................8
Switching On ............................................................9
Switching Off ...........................................................9
Chapter 3: Basic TV Operations
Accessing Channels ..............................................10
Watching Connected Devices ...............................10
Adjusting Volume ...................................................10
Accessing Smart TV Homepage ...........................10
Accessing Google Play ..........................................10
Accessing T-Channel ..............................................11
Using System Settings Menu ................................11
Using Instant Power On ..........................................11
Using TV Settings Menu .........................................11
Chapter 4: Using more of your TV
Installing Channels .................................................12
Using Subtitles ........................................................12
Turning On/Off Subtitles ........................................12
Enabling Subtitle Languages on Digital TV
Channels ................................................................12
Selecting a Subtitle Type on Digital TV Channels ...12
Using Teletext .........................................................12
Selecting Decoding Page Language ......................12
Digital Teletext Language .......................................12
Network Wake Up ....................................................12
T-Link .......................................................................13
Enabling or Disabling T-Link ...................................13
Using Auto Power On .............................................13
Using Auto Standby ................................................13
T-Cast .......................................................................13
Using EPG (Electronic Programme Guide) ..............13
Bluetooth Function .................................................13
Time Shift .................................................................14
PVR(Personal Video Recorder) ...............................14
Freeview Plus ..........................................................15
What You Need .....................................................15
To Launch Freeview Plus .......................................15
HbbTV ......................................................................15
HbbTV Access .......................................................15
HbbTV Deactivation ...............................................15
Works with Alexa ....................................................15
Netix Settings ........................................................15
Reset Shop ........................................................16
Password in Parental Control ................................16
Using the Hands-free TV Voice Control ..............16
Chapter 5: Other Information
Problems & Solutions ............................................17
Troubleshooting .....................................................18
Legal Statement ......................................................19
3
Chapter 1 Safety Information
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Warning
Never place a television set in an unstable location. A
television set may fall, causing serious personal injury
or death. Many injuries, particularly to children, can be
avoided by taking simple precautions such as:
-Using cabinets or stands recommended by the
manufacturer of the television set.
-Only using furniture that can safely support the
television set.
-Ensuring the television set is not overhanging the
edge of the supporting furniture.
-Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to
a suitable support.
-Not placing the television set on cloth or other
materials that may be located between the television
set and supporting furniture.
-Educating children about the dangers of climbing on
furniture to reach the television set or its controls.
If your existing television set is being retained and
relocated, the same considerations as above should be
applied.
Product
• Do not block or cover the ventilation openings on the
back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch the current
carryingpartsorshort-circuitparts,resultinginre,
electric shock, or damage to the unit.
• Do not attempt to open the cabinet as this may cause
damage. There are no parts inside you can service by
yourself.Referallservicingtoqualiedpersonnel.
• Donottouchthescreensurfacewithngersasthis
may scratch or mar the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
• This appliance is not intended for use by young
childrenorinrmpersonswithoutsupervision.Young
children should be supervised to ensure that they do
not play with the appliance.
Power and Plug
• Unplug the set under the following conditions:
-If the set will not be used for a long period of time.
-If the power cord or the power outlet/plug is
damaged.
-Follow the instructions to install and adjust the
product. Adjust those controls that are covered in
these operating instructions as improper adjustment
of other controls may result in damage. If this
happens, unplug the set and refer to the service
personnel.
-If the set is subject to impact or has been dropped
and the cabinet has been damaged.
• Where the mains plug or an appliance coupler is used
as disconnect device, the disconnect device shall
remain readily operable.
Power Cord and Signal Cable
• Do not allow anything to rest on or roll over the power
cord and the signal cable.
• Protect the power cord and the signal cable from
being trampled.
• Do not overload the power cord or the power outlet.
• Do not expose the power cord and the signal cable to
moisture.
Use Environment
• Do not place the set on an unstable cart, stand, or
table.
• Place the set on a place that allows good ventilation.
• Do not use the set near damp, and cold areas.
• Do not expose the set to excessive heat such as direct
sunlight,re,orthelikeandnonakedamesources,
such as lighted candles, should be placed on the
apparatus.
• Do not expose the set to dripping or splashing and
noobjectslledwithliquids,suchasvases,shallbe
placed on the apparatus.
• Do not use the set in dusty environments.
• Operating Temperature: 5°C to 35°C (41°F to 95°F)
Operating Humidity: 20% to 80%, non-condensing
Storage Temperature: -15°C to 45°C (5°F to 113°F)
Storage Humidity: 10% to 90%, non-condensing
Cleaning
• Dust the set by wiping the screen and the cabinet with
a soft, clean cloth or some special liquid cleaner.
• Do not apply excessive force to the screen when
cleaning.
• Do not use water or other chemical cleaner to clean
the screen as this may damage the surface of the TV
screen.
Hanging the TV Set on the Wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
• Check that the wall can support the weight of the TV
set and wall mount assembly.
• Follow the mounting instructions provided with the
wall mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the material
of the wall.
• Make sure that the TV set cables are placed so that
there is no danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here. Wall mount bracket not included.
(Note: certain TV models are not designed to be
mounted to the wall.)
4
Chapter 2 Connections and Setup
Initial Setup
Thersttimeyouswitchtheseton,theWelcome wizard appears, which guides you through the initial setup
process.Followtheon-screeninstructionstonishtheinitialsetupprocesssuchasselectingthelanguage,
connecting to the network, and more. During each step, either make a choice or skip the step. If you skip a step, you
can perform the setup later from the settings menu.
TV Buttons
-Power button
If the batteries in your remote control are run down, you can use the button on your TV set.
The model has only one button. It may work just as Power on/Standby button, or as a multi-function controller.
You can turn on the TV by pressing the button on the TV set.
While the TV is on, press the button to display the multi-function menu. More information about how to use the
multi-function menu, please refer to the figure below.
• Press to move the highlight to the next function selection
• Pressandholdthebuttonformorethan2secondstoconrmyourselection.
Note:
You can follow the on-screen guide to operate. Figures and illustrations are provided for reference only and may
vary depending on the model.
-MIC switch
ON
OFF
The MIC switch is located next to the power button. If you want to use the feature of hands-free TV voice control,
turn on the switch (not available for some models).
5
Connections and Setup
Sockets
Note: the location and names of the sockets on the TV may vary according to TV model, and not all sockets are
available on all models.
HDMI, HDMI(ARC) or HDMI(SERVICE) socket (input)
TheHDMI(High-DenitionMultimediaInterface)socketcanbe
used to connect a Blu-ray player, PC with a compatible video card
installed,certainDVDplayersorahigh-denitioncompatibledigital
satellite decoder. This socket provides an uncompressed digital
connection that carries both video and audio data by way of an
integrated mini-plug cable.
AV IN adapter socket
The AV IN adapter socket can be used to connect the attached
AV adapter cable with VIDEO and AUDIO L & R IN sockets. The
AV IN sockets can be used to connect a range of equipment,
including video recorders, camcorders, decoders, satellite receivers,
DVD players, or games consoles. The VIDEO IN socket provides
composite video connection.
ANTENNA IN socket (input)
This socket can be used to connect an outside aerial.
LAN
RJ45 plug for connecting to external modem or network access
equipment.
DIGITAL AUDIO OUT (OPTICAL) socket
This socket can be used to connect a compatible digital audio
receiver.
Headphone socket (output)
This socket can be used to connect headphones or stereo
earphones.
Warning: Excessive sound pressure from earphones and
headphones can cause hearing loss.
USB2.0 socket (input)
These sockets can be used to connect a USB 2.0 device.
Note: The number of USB sockets on the TV may vary according to
TV model.
LAN
Router / Modem
ANTENNA IN
AV IN
adapter
V L R
V L R
V L R
HDMI
or HDMI
(SERVICE)
or HDMI
(ARC)
USB 2.0
HDD
DIGITAL
AUDIO OUT
(OPTICAL)
6
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control supplied
withyoursetcanbeusedtonavigatethroughthemenusandtocongureallthegeneralsettings.
Note: gures and illustrations in this operation manual are provided for reference only and may differ from actual
product appearance. Certain function may not be available for some models, e.g. GUIDE/SUBTITLE functions
are only available under DTV source. And DTV is not available for certain model.
Connections and Setup
To switch the sound off and back on.
Standby / quit standby.
Numeric buttons To enter channel numbers or a digit.
To access T-Channel.
LIST To display the channel list.
/ To control the volume.
To display programme information, if available.
To display the TV settings menu.
P / To change channels.
To access the Smart TV homepage.
To display the Option menu.
▲/▼/◄/► Navigation direction buttons.
OK Toconrmanentryorselection.
To return to the previous menu or quit an app.
To select input source.
EXIT To exit the Settings menu.
LANG To select an audio language available for selected digital TV
programme.
GUIDE To toggle the Electronic Programme Guide on or off . (only
available for digital channels.)
TEXT To toggle Teletext on or off.
SUBT. To select a subtitle language available for selected digital TV
programme.
Colour buttons To select tasks or Teletext pages; to be used for HbbTV
function.
To start fast reverse.
To pause playback.
To start fast forward.
REC To record programmes under DTV source.
To start playback.
To stop playback.
To access the NETFLIX application. (Not available for some
models.)
Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3. Replace the back cover as illustrated.
1 2
3
RC802N
7
Connections and Setup
Standby / quit standby..
To display the TV settings menu.
To access the Smart TV homepage.
To display the Option menu.
▲/▼/◄/► Navigationdirectionbuttons.The▲/▼buttonsarealso
..used to change channels in TV mode.
OK Toconrmanentryorselection.The button is also used to
..display the channel list in TV mode.
To return to the previous menu or quit an app.
To select input source.
Press the Assistant button on your remote to talk to the Google
..Assistant. (Available only when the network connection works
..normally.)
To pop up the virtual remote control keyboard when available.
/ To control the volume.
P / To change channels.
ToaccessNetix. (Not available for some models.)
To access T-Channel.
Note: This remote control is available only for selected models. The remote
control type may be changed without notice.
Exclusive Remote Control
How to Use the Remote Control
When using the Google Assistantbuttonforthersttime,youwillbepromptedtopairtheremotewiththeTV.
a. Keep the remote control and TV in 1 meter, please follow the on-screen guide for pairing instructions. You can
use the Google Assistant button after activating successfully.
b. The Google Assistant is only available for content search from certain apps.
c. Set languages in the Settingstoyourlocallanguageorofciallanguagetoenhancevoicesearch
successfully.
Installing Batteries
1. Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the
polarities marked on the battery case.
3. Replace the back cover as illustrated.
RC802V
Google and Android TV are trademarks of Google LLC.
1 2
3
8
Connecting to a Wireless Network
To connect to a wireless network
1. Ensure you have:
•
A router broadcasting a high-speed wireless signal
•
A high-speed internet connection
2.
Use the Network & Internet menutoconguretheTV.
Network Connection
Your TV will require an internet connection to operate all functions. Data usage charges may apply.
Please refer to your Internet Service Provider (ISP) for additional information.
To access the internet, you must subscribe to high speed broadband internet service from your internet service
provider.
Your TV can be connected to your home network in two ways:
•Wired,usingtheRJ45(LAN)connectoronthebackpanel.
•Wireless,usingtheinternalwirelessorexternalwirelessUSBadapterandyourhomewirelessnetwork.
Note: the following instructions are just the usual ways to connect your TV to the wired or wireless network. The
connection method may be different depending on your actual network conguration. If you have any questions about
your home network, please refer to your ISP(Internet Service Provider).
Connecting to a wired Network
To connect to a wired network:
1. Ensure you have:
•AnEthernetcablelongenoughtoreachyourTV
•ArouterormodemwithanavailableEthernetport
•Ahigh-speedinternetconnection
•AnEthernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to the
Ethernet port on the back of the TV.
3. Use the Network & Internet menutoconguretheTV.
Connections and Setup
Router
Modem Internet
LAN port
Modem Internet
Wireless router
Note: please follow below steps to enter the Network & Internet menu.
1. Press on the remote control to display the Smart TV homepage.
2. Press ▲/◄/► to move the cursor to (Settings) on the right top of the screen and press OK to enter.
3. Press ▲/▼ to select Network & Internet, then press OK to enter the submenu and follow the on-screen
guidance to set up your network.
9
Connections and Setup
Switching On
Follow the instructions on this page on how to switch on your TV set and
the remote control before going on to following pages describing how to
use the channel set-up procedure.
1. Insert two AAA batteries in the remote control.
Precautions on using batteries:
-Onlyusethebatterytypesspecied.
- Make sure you use the correct polarity.
- Do not mix new and used batteries.
- Do not use rechargeable batteries.
-Donotexposebatteriestoexcessiveheatsuchassunshine,reor
thelike,throwtheminare,rechargethemortrytoopenthem,as
this could cause them to leak or explode.
- Remove the batteries from the remote control if you are not using it
for a long period of time.
- Attention should be drawn to the environmental aspects of battery
disposal.
2. Connect the power cable FIRST to the television, THEN to a mains
socket. (Note: if the power cable is connected to the television, please
only connect the power cable to the mains socket.)
Your TV set should only be connected to an AC supply. It must not be
connected to a DC supply. If the plug is detached from the cable, do
not, under any circumstances, connect it to a mains socket, as there is
a risk of electric shock.
Note: the gures are for representation only, the location of power
socket of the television might differ depend on the model.
3. Connect an outside aerial to the ANTENNA IN socket at the back of
the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for
connectinganexternalaerialorotherequipmenttted.
Note: if you want to receive the signal from your cable or cable box,
please connect a coaxial cable to the ANTENNA IN socket at the back
of the TV set.
4. When powered on, the TV will be turned on directly or be in standby
mode.
If the power indicator lights up, the TV set is in standby mode. Press
the button on the remote control or on the TV set to turn on the TV.
Switching Off
To put the TV set into standby mode, press the button on the
remote control. The TV set remains powered up, but with low energy
consumption.
To switch off the TV set, unplug the mains socket from the mains
outlet.
10
Chapter 3 Basic TV Operations
Accessing Channels
-Using the RC802N Remote Control
Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the
channels.
Using the P / buttons: press the P / buttons
on the remote control to scroll through the channels.
Using the LIST button: press the LIST button to
display the channel list and press ▲/▼/◄/► and OK to
select channels.
-Using the RC802V Remote Control
Using the ▲/▼ buttons: press the ▲/▼ buttons on the
remote control to scroll through the channels.
Using the OK button: press the OK button to display
the channel list and press ▲/▼/◄/► and OK to select
channels.
Using the P / buttons: press the P / buttons on
the remote control to scroll through the channels.
Using the button: press
to display the virtual
remote control keyboard, then you can use the numeric
buttons or the LIST
button to operate accordingly.
Watching Connected Devices
Press on the remote control to display the source
list. Press ▲/▼ to select TV or other input sources and
press OKtoconrm.
You can also press on the remote control to display
the homepage, press ▲/◄/► to move the cursor to
the (Inputs) area on the right top of the screen, and
press OK to enter. Then press ▲/▼ and OK to select
the input source.
Adjusting Volume
Volume control: press the / buttons on the
remote control or the corresponding buttons on the TV
set to increase or decrease the volume.
Sound mute: press the button to temporarily mute
the sound. Press this button again or the button to
restore the sound. (Available for RC802N remote control
only.)
Accessing Smart TV Homepage
Allows you to enjoy Internet Applications (Apps) and
specially adapted Internet websites, and perform system
settings for your TV. You can make controlling with the
TV remote control.
WARNING:
• CongurethenetworksettingsbeforeusingSmart TV
applications.
• Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the content provider, an
application’s updates or the application itself may be
discontinued.
• Depending on your country's regulations, some
applications may have limited service or not be
supported.
• Changes in application content may be made without
prior notice by the service provider.
1. Press on the remote control to display the Smart
TV homepage.
2. Press ▲/▼/◄/► and OK to enter the desired apps,
functions or settings.
3. Press to return to the homepage.
4. To exit the homepage, press ▲/◄/► to move the
cursor to the (Inputs) area on the right top of the
screen, press OK to enter and then press ▲/▼ and
OK to select your desired input source.
Note: since the connection with Internet takes time, it’s
recommended that you wait a few minutes to use the
Smart TV feature after activation of TV from standby.
Accessing Google Play
Google Play is your entertainment unbound. It brings
together all of the entertainment you love and helps
you explore it in new ways, anytime, anywhere. We’ve
brought the magic of Google to music, movies, TV,
books, magazines, apps and games, so you get more
from your content every day.
11
Basic TV Operations
1. Press on the remote control to display the Smart
TV homepage.
2. Press ▲/◄/► to move the cursor to (Settings) on
the right top of the screen and press OK to enter the
system settings.
3. Press ▲/▼ to choose the items and press OK to
enter.
4. Press to return to previous interface.
5. Press EXIT to close the menu.
Using Instant Power On
It enables you to turn on your TV faster from standby
mode than turning this function off, but it will also
increase standby power consumption.
1. Press on the remote control to display the
homepage, Press ▲/◄/► to select (Settings) >
Device Preferences > Power > Instant power
on and press OK to toggle between On and Off.
2. Press to return to previous interface.
Using TV Settings Menu
Allows you to adjust TV settings, such as picture and
sound.
1. Press on the remote control to display the TV
settings menu.
2. Press ▲/▼ to select the desired item, then press
OK/► to enter the corresponding submenu.
3. In submenus, press ▲/▼ to select menu options,
then press OK/► to enter the option list, the
adjustment interface, or the corresponding submenu.
4. Press to return to the previous menu.
5. Press EXIT or to close the menu.
Notes:
- You can also press on the remote control, select
Settings (if available) and press OK to enter the TV
settings menu. Some options may not be available
for certain signal sources.
- Setting LED motion clear on will make fast moving
images clearer by controlling the LED backlight, but
the picture will be darker and more ickering than
with LED motion clear off.
1. Press on the remote control to display the Smart
TV homepage.
2. Press ▲/▼ to select the Apps, and press OK to
enter. Then press ▲/▼/◄/► and OK to enter the
desired apps.
3. Press to return to the homepage.
Accessing T-Channel
Allows you to enjoy Internet Applications (Apps).
1. Press on the remote control to display the
recommended apps.
2. Press ▲/▼/◄/► and OK to enter the desired apps.
Forthersttime,theappswillbedownloaded
automatically.
3. Press to return to the recommend page and exit.
Using System Settings Menu
Allows you to not only adjust device settings, such
as Network & Internet, Accounts & Sign-In, Apps and
Device Preferences, etc., but also set preferences.
12
Chapter 4 Using more of your TV
2. Press ▲/▼ to select a subtitle language as your
preferred language and press OKtoconrm.
3. Press ▲/▼ to select Digital subtitle language 2nd
and press OK/► to enter.
4. Press ▲/▼ to select a secondary subtitle language
and press OKtoconrm.
5. Press EXIT or to close the menu.
Shortcut operation: Press SUBT. on the remote
control to directly select a subtitle language
available for the selected digital TV programme.
(Available for RC802N remote control only.)
Selecting a Subtitle Type on Digital TV Channels
1. Press on the remote control, select Channel >
Subtitle > Subtitle type and press OK/► to enter.
2. Press▲/▼toselectasubtitletypeandpressOK to
conrm.YoucanselectHearing impaired to display
the hearing impaired subtitles with your selected
language.
3. Press EXIT or to close the menu.
Using Teletext
Selecting Decoding Page Language
1. Press on the remote control, select Channel >
Teletext > Decoding page language and press
OK/► to enter.
2. Press ▲/▼ to select a proper type of language in
which Teletext will display and press OKtoconrm.
3. Press EXIT or to close the menu.
Digital Teletext Language
On digital TV channels, depending on the broadcaster,
you may be able to enjoy a service with multiple initial
Teletext pages in different languages. This function
allows you to select an available language as primary
language, which relates to different initial Teletext
pages.
1. Press on the remote control, select Channel >
Teletext > Digital teletext language and press
OK/► to enter.
2. Press ▲/▼ to select a language and press OK to
conrm.
3. Press EXIT or to close the menu.
Network Wake Up
This function allows you to turn on your TV from standby
mode via a network. To use this function, please make
sure:
1. Your TV is connected to an effective home network;
2. The desired controller, such as a smartphone, is
connected to the same network as your TV;
3. An app which supports network waking up function,
such as YouTube, has been installed into the
controller;
Installing Channels
This section describes how to search and store
channels automatically. This may be done in any of the
cases below:
-you are prompted that there are no channels in TV
mode;
-you want to update your channels.
1. In TV mode, press
on the remote control and
select Channel > Channel scan. Press OK/►to
enter.
2. The TV installs and arranges channels according
toyourcountryorregion.Press▲/▼toselect
Country/Region, and press OK/►toenter.Enter
the default password 1234 or your own password in
case you have changed the password in the System
> Lock menu.Press▲/▼toselectyourcountryor
region and press OK to confirm.
3. Press▲/▼toselectAutomatic search and press
OK/►toenter.
4. Press▲/▼toselectChannel typeandpress◄/►
to select Digital, Analogue or Digital&Analogue.
5. Afterconfigurationiscompleted,press▼toselect
Search and press OK to start scanning channels.
6. The channel search may take a few minutes. After
the automatic search, channels are arranged in a
preset order. If you wish to hide or move channels,
press
on the remote control, select Channel >
Channel organizer and press OK/►toenter.
Note: If the channel search retrieved only the analogue
channels it could be caused by poor broadcasting
and therefore is not covered by manufacturer
warranty. Manufacturers cannot be held
responsible for lack of or poor broadcasting in
some areas.
Using Subtitles
You can enable subtitles for each TV channel. Subtitles
are broadcast via Teletext or DVB-T digital broadcasts.
With digital broadcasts, you have the additional option
of selecting a preferred subtitle language.
Note: some options are available only when Subtitle is
set to on.
Turning On/Off Subtitles
1. Press on the remote control, select Channel >
Subtitle and press OK/► to enter.
2. Select the Subtitle option, and press OK to toggle
between on or off.
3. Press EXIT or to close the menu.
Enabling Subtitle Languages on Digital TV Channels
1. Press on the remote control, select Channel >
Subtitle > Digital subtitle language 1st and press
OK/► to enter.
13
Using more of your TV
4. Networked standby is set to On in the Network
& Internet menu under homepage by pressing
> (Settings) > Network & Internet and use ▼
to select Networked standby and press OK to
activate.
When the TV is in networked standby mode, you can
use the app to wake up the TV remotely.
Notes:
-This feature is disabled if you press and hold the
button on the remote control and conrm to
shut the TV down
-Before using the feature of network wake up, make
sure (Settings) > Device Preferences >
Power > Instant power on is set to on.
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV and enable auto power
on and auto standby between the TV and CEC devices.
Enabling or Disabling T-Link
1. Press on the remote control, select System >
T-Link and press OK/► to enter.
2. Select the T-Link option, and press OK to toggle
between on or off.
3. Press EXIT or to close the menu.
Using Auto Power On
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s
remote. Press OK to turn it on to enable this function.
Using Auto Standby
Enables all CEC devices to automatically go to the
standby mode when you turn off the TV with the TV
remote. Press OK to turn it on to enable this function.
Note: the CEC functions depend on the devices
connected and it is possible that some devices may not
interoperate correctly when connected to this TV. The
user manual or the manufacturer of the problematic
devices should be consulted for further information.
T-Cast
T-Cast lets you enjoy plenty of videos, rich of
applications, and share great contents on large screen.
It also allows you to turn a smart device into a sophisti-
cated remote control, providing more features than your
normal TV remote control. You can then control your TV
through your smart device.
Follow the on-screen instructions to scan the QR code
on the TV screen and download T-Cast.
Note: Make sure the smart device and your TV are
in the same home LAN (local area network) or
network segment to use TV remote function.
Using EPG (Electronic Programme Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. You can navigate, select and
view programmes.
Note: the DTV EPG does not require an internet
connection.To use the DTV EPG, HbbTV must be set
to Off. when HbbTV is set to ON, then it will enter the
HbbTV EPG directly. Please refer to “ HbbTV ” part of
this manual for assistance to set HbbTV to on or off.
1. Press
on the remote control, select Channel >
EPG and press OK/► to enter, or press GUIDE
directly (if available) on the remote control, the
Programme Guide menu will appear, which allows
you to get information about the current or next
programme playing on each channel. Navigate
through the different programmes using the
▲/▼/◄/►buttonsontheremotecontrol.
2. Use the related buttons shown at the bottom of the
screen to view EPG.
- Programme lter:Programmeguidelterfor
digital TV programmes.
• Press to display the type list of the
programme.
• Navigate through the different types using the
▲/▼buttonsontheremotecontrol.
• Select one or more types, which you want to
highlight from the type list, press OK to select or
deselect. A checkmark will appear to the right of
the type when selected.
- Custom schedule:Press▲/▼toselecta
programme, then press the RED button to set
the schedule, press OKtoenteranduse▲/▼
to select Schedule reminder or Schedule
recording.
- Select date: Press the GREEN button to select
date.
- Schedule list: Press the YELLOW button to view
your schedule list.
Note: if using the remote control of RC802V, to access
the colour buttons, you need to press button on
the remote control to display the
virtual remote control
keyboard rst.
3. Press to exit EPG.
Bluetooth Function
(* not available for some models)
Bluetooth® is a wireless technology standard for
exchanging data over short distance between Bluetooth
devices. You can connect Bluetooth audio device,
mouse or keyboard via the TV.
1. Press on the remote control, press ▲/◄/► to
move the cursor to the (Settings) area on the
right top of the screen and press OK to enter.
14
Using more of your TV
Quick Access of Time Shift
Insert a USB disk, press PAUSE( ) on the remote
control, it will access time shift automatically.
(Available for RC802N remote control only.)
PVR (Personal Video Recorder)
(* not available for some models)
Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to
theTVrst.
Note: the feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in product
or place of installation. Feature might also be blocked
by TV network due to copyright protection (HD content,
recording protection). Please use
on the remote
control to check if the feature is available in your product.
1. Press on the remote control and select PVR.
2. Press OK/►toenterandselectRecord. It starts to
record automatically.
3. Press blue button to access Settings and use
▲/▼/◄/►toadjusttherecordingduration.
4. Press OK or to stop recording manually,
the recorded file will be saved. In normal
operation, the recording will stop automatically
when the recording duration expires.
Note: you can find and colour buttons on the
virtual remote control keyboard for RC802V.
5. In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
6. To watch the recorded programme, exit PVR mode
first.Press and select PVR > PVR list, then select
the related record file. Press OK to play. (It is the
same if you record a digital radio programme.)
Notes:
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive to avoid
the loss of your important data due to unforeseen
malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source during
recording, store the recording data before changing the
channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the file
format is not supported, the file is damaged, or the file
cannot be decoded.
- Do not disconnect the USB drive when the system is
reading a file or transmitting data, otherwise the system
or the drive may be damaged.
2. Move to the Remotes & Accessories area, select
Add accessory and press OK to enter. The TV will
search nearby Bluetooth devices automatically.
3. Select an available device, press OK and follow the
guides on the screen to connect it.
Note: bluetooth technology (if available in your TV) uses
2.4GHz frequency thus close proximity to Wi-Fi access
points, routers or microwave ovens might interfere with
Bluetooth audio streaming. If you face interruptions
in audio reception, you should restart your Bluetooth
device to nd frequency with less interferences and if
you continue to face issues you should move closer
to TV or increase space between TV and source of
interferences.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by TCL is under license. Other trademarks
and trade names are those of their respective owners.
Time Shift
(* not available for some models)
Allows you to pause, fast forward and rewind live TV,
so you don’t have to miss any part of your favourite
programmes. Before you use the function, connect a
USBdrivetotheTVrst.Forthersttime,youshould
complete the disk setup for the USB drive.
Press on the remote control and select Time shift,
then press OK/►toconfirm.(Note: this option is
available only when Time shift is set to On: press
ontheremotecontrol,press▲/▼toselectSettings
> Channel > Time shift, press OK to toggle on.)
1. Follow the directions on the screen to do the disk
setup if you use time shift for the first time.
2. After the disk setup is done, time shift will start, and
the time shift menu displays on the screen.
3. For later use, press and select Time shift. press
OK to display the time shift menu and operate
according to the on-screen prompt.
4. Press button on the remote control to stop the time
shift and exit. (for RC802V, you can nd button on
the virtual remote control keyboard.)
-When the time shift menu disappears and only the
timing of the time shift remains on the screen, you
can press OK to call out the time shift menu.
Notes:
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for time shift,
the bigger the recording length.
15
Using more of your TV
-You cannot download les to your TV with HbbTV
function.
-Application provider or broadcasting related
conditions may cause an HbbTV application to be
unavailable momentarily.
-To access HbbTV applications you must connect
your TV to the Internet via a broadband link. HbbTV
applications may not work correctly in case of
network related issues.
HbbTV Access
1. Press on the remote control, select System >
HbbTV settings and press OK/► to enter.
2. Press OK to turn it on.
3. When you tune to a digital TV channel that offers
HbbTV, this will be signaled to you by an on-screen
indication (generally a red button, but other colour
buttons may also be used). Press the indicated colour
button to open the interactive pages.
4. Use ▲/▼/◄/► and the colour buttons to navigate
through the HbbTV pages and press OKtoconrm.
HbbTV Deactivation
To avoid disturbances that may be caused by HbbTV
broadcasting tests, you can turn off the HbbTV function:
1. Press on the remote control, select System >
HbbTV settings and press OK/► to enter.
2. Press OK to turn it off to disable it.
Works with Alexa
To use the Works with Alexa function, you will need a
device like an Amazon Echo or Amazon Echo Dot (Sold
Separately). Set up your Amazon device. Then, on your
TV go to the Settings Menu, select System, and select
“Works with Alexa”. Then follow the on screen prompts.
Please note that within the Alexa app on your phone,
you will need to enable the TCL Assistant Skill, through
the Alexa Skills Menu.
Netix Settings
Netixprovideson-demandmoviesandTVshows
deliveredviatheInternet.Netixisavailableincertain
countries.Unlimited membership is required. More
informationcanbefoundatwww.netix.com<http://
www.netix.com/>.
Note: you can directly access Netix via clicking the
Netix button on the remote control.
Freeview Plus
Freeview Plus delivers an aggregated TV service that
includes an unrivalled 7+ day EPG experience from
all the free to air networks in Australia. At the press
of a button, Freeview Plus provides users with all the
available Catch Up content along with the ability to set
reminders and to search for content via genre. Use the
following features and don’t miss a show:
- A 7+ day easy to use EPG
- All available Catch Up TV content
- Featured recommendations
- Ability to browse by genre and search programmes
for the next 7 days
- A favourite function with reminders to live and Catch
Up programmes
What You Need
Your television must be connected to a high speed
broadband internet connection as well as an aerial.
To Launch Freeview Plus
When you are watching TV, you will see a prompt at the
top left of the screen. Press the corresponding colour
key on the remote control to launch Freeview Plus.
Follow the on-screen instructions and use the colour
keys, arrow keys and the OK button to navigate.
*Freeview Plus uses HbbTV technology which combines
broadcast and broadband. An internet connection is
required. Data usage and conditions apply.
**Freeview Plus is available throughout Australia but
Catch Up services vary by region – please check www.
freeview.com.au to see what is available in your area.
***More information about Freeview Plus can be found
on www.freeview.com.au.
HbbTV
HbbTV (Hybrid broadcast broadband TV) is a service
offered by certain broadcasters and available only on
some digital TV channels. HbbTV delivers interactive
television over broadband Internet. These interactive
features are added to and enrich the normal digital
programmes, and include services such as digital
teletext, electronic programme guide, games, voting,
specicinformationrelatedtothecurrentprogramme,
interactive advertising, information magazines, catch-up
TV, etc.
To use HbbTV please ensure your TV is connected to
Internet and HbbTV is switched on.
Notes:
-HbbTV services are broadcast- or country-
dependent and may be unavailable in your area.
16
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press on the remote control to display the
homepage, Press ▲/◄/► to select (Settings) >
Device Preferences > Reset and press OK to enter.
2. Press ▲/▼ to select Factory data reset and press
OK to enter. Then select Erase everything and
press OK to confirm.
3. Enter 1234 or the PIN according to the on-screen
prompt.
4. Select OK and press OKtoconrm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
Password in Parental Control
-The default password is 1234. You can change it to a
new one.
-The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Using the Hands-free TV Voice Control
(* not available for some models)
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access the
Googlewebsiterst.Thenfollowthestepsbelowto
access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
2. Access the Android TV homepage by pressing on
the remote control.
3. Select (Settings) > Quick Settings > "Ok Google"
detection and press OK to turn it on. You can also set
it by selecting (Settings) > Device Preferences >
Google Assistant > "Ok Google" detection.
4. Say “OK Google” to activate it.
Notes:
-The availability of hands-free TV voice control
depends on your region/country/language and
your model. For details, please refer to your local
dealer.
-A quiet surrounding is required for better function
when using it. The recommended using distance
is within 2 meters in front of TV set.
-Turn the built-in MIC switch to off if you are not
going to use it. Or set the "Ok Google" detection
to off.
-Standby power consumption will increase because
the built-in MIC is always listening when the
Google Assistant or voice control with the built-in
MIC is enabled.
Using more of your TV
17
Chapter 5 Other Information
Problems & Solutions
Note: problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected
TV models can disregard them.
compressed, so they may automatically stop playing
during playback.
7. What should I pay attention to, when I do SW
updating?
-No power cuts when SW updating;
-Avoid any operations with your remote control when
SW updating;
-Depending on your internet connection speed, the
software updating process may take some time.
8. There are no distinct changes of TV interface
after SW updating.
-Under certain conditions, SW updating may not only
update or add new functions but also improve the
performance of the TV set, without distinct changes
to the user interface. Also, there may be no changes
to the user interface at all.
9. What should I do when SW updating process
stops due to a sudden power-off?
-If you do SW updating by USB, do not pluck the
USB from your TV, and restart your TV to continue
SW updating; If you do SW updating by Network,
also restart your TV and check if it is well functioned.
10. With a USB device being inserted into the TV in
advance, I am prompted that no USB devices are
detected after I access Media, why?
-There may be something wrong with your mobile
hard disk(s), damaged or with low voltage. You could
increase power supply by inserting the two plugs
on one end on the USB wire into TV's USB port
simultaneously.
11. External device cannot be recognized.
-Some external devices (e.g. webcam, smart phone,
tablet, game handle, and external wireless adapter)
may not be compatible with the TV and cannot be
supported for certain functions (nScreen, wireless
display, gesture control, face recognition, if any).
Please try a similar device. If it does not work,
contact your local dealer.
12. Voice search does not work.
-Check if your remote control has been successfully
paired with your TV.
-Check if the language setting is correct.
-Check if Google server is available and stable.
1. Fail to link to the network.
-Check if your TV is connected with the network;
-Reboot your TV;
-Consultyourinternetserviceprovider,toconrm
if access of your router is supported. Refer to the
operation manual of your router.
-Make sure your TV is connected to a router, and
make sure your router is powered on. Check that
your router/modem has an internet connection, and
that your Ethernet cables/wireless connection is OK.
Test your connec t i o n w i t h a c o m p u t er to make sure it
is OK. Should the problem persist, contact customer
service.
2. The video could not be played smoothly.
-VideosfromyourUSBashdrive---Itmayresult
fromdatatransmission,oritscodeowisfarbeyond
the supported formats of this TV set.
-Videos downloaded from internet, or online videos.
a. It may be caused by the lower bandwidth of your
network. A high network speed is required to
handle online videos.
b. Peak internet usage times may affect the
bandwidth.
c. Check if any other computers on the same
network are also operating, as they may be using
up bandwidth. Especially if they are downloading
or playing on-line videos.
d. The video may not be smooth itself, it is not the
problem of your TV or network.
3. When two mobile hard disks are connected
with the TV at the same time, they will not be
recognized some times.
-All mobile hard disks consume a lot of power,
which may result in power supply problems. We
recommend inserting only one hard disk, or a low
power consumption mobile hard disk.
4. The video from a mobile hard disk (USB) is
playing with no sound.
-The audio format of the video in your mobile hard
disk is not supported by the TV player.
5. Some videos fail to play.
-The formats of the videos may not be supported
by the TV, especially videos shot by certain kinds
of cameras, generally with their private protocol of
formats, which are not compatible with your TV.
6. Video stops playing midway.
-Mistakes may occur when videos are copied or
18
Other Information
Troubleshooting
Most problems you encounter with your TV can be
corrected by consulting the following troubleshooting list.
No picture, no sound
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
No colour
1. Change the colour system.
2. Adjust the saturation.
3. Try another channel. Black-white programme may be
received.
Remote control does not work
1. Change the batteries.
2. Batteries are not installed correctly.
3. Main power is not connected.
No picture, normal sound
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
Normal picture, no sound
1. Press the VOLUME UP button to increase volume.
2. Volume is set to mute, press the Mute button to
restore sound. (Available for RC802N remote control
only.)
3. Change the sound system.
4. Broadcasting failure may happen.
Unorderly ripples on the picture
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Snowy dots and interference
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be
marred by dots. When the signal is extremely weak, it
may be necessary to install a special antenna to improve
the reception.
1. Adjust the position and orientation of the indoor/
outdoor antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may
happen.
Ignition
Black spots or horizontal streaks appear, or the picture
uttersordrifts.Thisisusuallycausedbyinterference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Ghost
Ghosts are caused by the television signal following two
paths.Oneisthedirectpath,theotherisreectedfrom
tall buildings, hills, or other objects. Changing the
direction
or position of the antenna may improve the reception.
Radio frequency interference
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
*To bring you better visual experience, please remove
all labels, if any, from TV front panel and screen before
use.
*Figures and illustrations in this User Manual are
provided for reference only and may differ from actual
product appearance. Product design and specications
may be changed without notice.
19
Other Information
Legal Statement
[Legal Statement] of TCL - manufacturer of this TV set
Due to the various capabilities of products featuring
the SmartTV - Services, as well as limitations in the
available content, certain features, applications, and
services may not be available on all devices or in all
territories. Some features on SmartTV may also require
additional peripheral devices or membership fees that
are sold separately. Please visit our website for more
informationonspecicdeviceinformationandcontent
availability. The services and availability of content
through SmartTV are subject to change from time to
time without prior notice.
All content and services accessible through this device
belong to third parties and are protected by copyright,
patent, trademark and/or other intellectual property
laws. Such content and services are provided solely
for your personal noncommercial use. You may not
use any content or services in a manner that has
not been authorized by the content owner or service
provider. Without limiting the foregoing, unless expressly
authorized by the applicable content owner or service
provider, you may not modify, copy, republish, upload,
post, transmit, translate, sell, create derivative works,
exploit, or distribute in any manner or medium any
content or services displayed through this device.
You expressly acknowledge and agree that use of the
device is at your sole risk and that the entire risk as to
satisfactory quality, performance and accuracy is with
you. The device and all third party content and services
are provided “as is” without warranty of any kind,
either express or implied. TCL expressly disclaims all
warranties and conditions with respect to the device and
any content and services, either express or, implied,
including but not limited to, warranties of merchantability,
ofsatisfactoryquality,tnessforaparticularpurpose,of
accuracy, of quiet enjoyment, and non-infringement of
third party rights. TCL does not guarantee the accuracy,
validity, timeliness, legality, or completeness of any
content or service made available through this device
and does not warrant that the device, content or services
will meet your requirements, or that operation of the
device or services will be uninterrupted or error-free.
Under no circumstances, including negligence, shall
TCL be liable, whether in contract or tort, for any direct,
indirect, incidental, special or consequential damages,
attorney fees, expenses, or any other damages arising
out of, or in connection with, any information contained
in, or as a result of the use of the device, or any content
or service accessed by you or any third party, even if
advised of the possibility of such damages.
Third party services may be changed, suspended,
removed, terminated or interrupted, or access may be
disabled at any time, without notice, and TCL makes no
representation or warranty that any content or service
will remain available for any period of time. Content
and services are transmitted by third parties by means
of networks and transmission facilities over which TCL
has no control. Without limiting the generality of this
disclaimer, TCL expressly disclaims any responsibility or
liability for any change, interruption, disabling, removal
of or suspension of any content or service made
available through this device. TCL may impose limits
on the use of or access to certain services or content,
in any case and without notice or liability. TCL is neither
responsible nor liable for customer service related to
the content and services. Any question or request for
service relating to the content or services should be
made directly to the respective content and service
providers.
TCL Electronics Australia Pty Ltd.
ABN 83 111 032 896
Telephone: 1300 738 149
www.tcl.com/au
Like us on Facebook
ThetermsHDMI,HDMIHigh-DenitionMultimediaInterface,andthe
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
HEVC, or H.265 is the successor to H.264 and strives to deliver video with
equivalent quality with bitrate savings of up to 50 percent. HEVC is critical for
streaming high-quality video even in congested network environments, and
will be a driving factor in the delivery of 4K content to new Ultra HD displays.
Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and
the double-D symbol are trademarks of Dolby Laboratories.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by TCL is under license. Other
trademarks and trade names are those of their respective owners.
Freeview Plus uses HbbTV technology which combines broadcast and
broadband. An internet connection is required. Data usage and conditions
apply.
72-RT51GT-EAU1B
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
in altre lingue
- English: TCL 65P615 User manual
Documenti correlati
Altri documenti
-
Support TCL Manuale utente
-
Finlux 32FDB5522 Manuale utente
-
-
-
Samsung BD-DT7800 Manuale utente
-
-
Hyundai FLJ42739GSMART Manuale utente
-
Samsung BD-D8900A Manuale utente
-
-
Xiaomi MiTVP132 Manuale utente