Indesit BAAN 13 PX Manuale del proprietario

Categoria
Frigoriferi
Tipo
Manuale del proprietario
I
Istruzioni per luso
COMBINATO FRIGORIFERO/CONGELATORE
BAAN 13 PX
Sommario
Installazione, 2
Posizionamento e collegamento
Reversibilità apertura porte
Descrizione dellapparecchio, 3
Vista d’insieme
Accessori, 4
Avvio e utilizzo, 5-6
Avviare l’apparecchio
Sistema di raffreddamento
Utilizzare al meglio il frigorifero
Utilizzare al meglio il congelatore
Manutenzione e cura, 7
Escludere la corrente elettrica
Pulire l’apparecchio
Evitare muffe e cattivi odori
Sbrinare l’apparecchio
Sostituire la lampadina
Precauzioni e consigli, 8
Sicurezza generale
Smaltimento
Risparmiare e rispettare l’ambiente
Anomalie e rimedi, 9
Assistenza, 10
Assistenza attiva 7 giorni su 7
Italiano, 1
Français, 21
English,11
GBI F
Espanol
, 41
E
Deutsch
, 31
D
2
I
Installazione
1
2
3
4
5
Reversibilità apertura porte
! È importante conservare questo libretto per poterlo
consultare in ogni momento. In caso di vendita,
di cessione o di trasloco, assicurarsi che resti insieme
all’apparecchio per informare il nuovo proprietario
sul funzionamento e sui relativi avvertimenti.
! Leggere attentamente le istruzioni: ci sono importanti
informazioni sull’installazione, sull’uso e sulla sicurezza.
Posizionamento e collegamento
Posizionamento
1. Posizionare l’apparecchio in un ambiente ben aerato
e non umido.
2. Non ostruire le griglie posteriori di ventilazione:
compressore e condensatore emettono calore e richiedono
una buona aerazione per funzionare bene
e contenere i consumi elettrici.
3. Lasciare una distanza di almeno 10 cm tra la parte
superiore dell’apparecchio ed eventuali mobili sovrastanti e
di almeno 5 cm tra le fiancate e mobili/pareti laterali.
4. Lasciare l’apparecchio lontano da fonti di calore
(la luce solare diretta, una cucina elettrica).
5. Per mantenere una ottimale distanza del prodotto dalla
parete posteriore, montare i distanzieri presenti nel kit di
installazione seguendo le istruzioni presenti sul foglio
dedicato.
Livellamento
1. Installare l’apparecchio su un pavimento piano e rigido.
2. Se il pavimento non fosse perfettamente orizzontale,
compensare svitando o avvitando i piedini anteriori.
Collegamento elettrico
Dopo il trasporto, posizionare l’apparecchio verticalmente e
attendere almeno 3 ore prima di collegarlo all’impianto
elettrico. Prima di inserire la spina nella presa della
corrente, accertarsi che:
la presa abbia la messa a terra e sia a norma di legge;
la presa sia in grado di sopportare il carico massimo
di potenza della macchina, indicato nella targhetta
caratteristiche posta nel vano frigorifero in basso
a sinistra (es 150 W);
la tensione di alimentazione sia compresa nei valori
indicati nella targhetta caratteristiche, posta in basso
a sinistra (es 220-240 V);
la presa sia compatibile con la spina dell’apparecchio.
In caso contrario richiedere la sostituzione della spina a
un tecnico autorizzato (
vedi Assistenza
); non usare
prolunghe e multiple.
! Ad apparecchio installato, il cavo elettrico e la presa della
corrente devono essere facilmente raggiungibili.
! Il cavo non deve subire piegature o compressioni.
! Il cavo deve essere controllato periodicamente
e sostituito solo da tecnici autorizzati (vedi Assistenza).
! Lazienda declina ogni responsabilità qualora queste
norme non vengano rispettate.
3mm
I
3
Descrizione
dellapparecchio
Vista dinsieme
Le istruzioni sull’uso valgono per diversi modelli per cui è possibile che la figura presenti particolari differenti
rispetto a quelli dell’apparecchio acquistato. La descrizione degli oggetti più complessi si trova nelle pagine seguenti.
Variabili per numero e/o per posizione.
*
Presente solo in alcuni modelli.
PIEDINO
di regolazione
Balconcino estraibile
con coperchio e
con PORTAUOVA
Balconcino estraibile
PORTAOGGETTI
Balconcino
BOTTIGLIE
Bacinella ghiaccio
Ice
3
RIPIANO
Contenitore
FLEX COOL BOX per
CARNI e PESCI
*
Bacinella ghiaccio
Ice
3
Vano
CONGELAMENTO e
CONSERVAZIONE
Vano
CONSERVAZIONE
Manopola
REGOLAZIONE
DELLA
TEMPERATURA
LAMPADINA
(vedi Manutenzione)
Scatola
MULTI-USO
*
Cassetto
FRUTTA e
VERDURA
4
I
Accessori
RIPIANI: pieni o a griglia.
Sono estraibili e regolabili in
altezza grazie alle apposite
guide (
vedi figura
), per
l’inserimento di contenitori
o alimenti di notevole
dimensione. Per regolare
l’altezza non è necessario
estrarre completamente il ripiano.
Scatola MULTI-USO
*
: per conservare a lungo vari alimenti
(per esempio salumi); evita anche che si rilascino odori nel
frigorifero.
Contenitore FLEX COOL BOX
*
È il nuovo contenitore per mantenere freschi carne,
pesce, formaggi. Se collocato nella parte "bassa" del
ripiano frigo è l'ideale per carne e pesce; se spostato
nella parte "alta" è ottimo per formaggi. Se non è
necessario, può essere comodamente estratto dal frigo.
Indicatore TEMPERATURA
*
: per individuare la zona più
fredda del frigorifero.
1. Controllare che sull’indicatore risulti ben evidente OK
(
vedi figura
).
vert
noir
consulter la notice
2. Se non compare la scritta OK significa che la
temperatura è troppo elevata: regolare la manopola
FUNZIONAMENTO FRIGORIFERO su una posizione più
alta (più freddo) e attendere circa 10 h finché la
temperatura si sia stabilizzata.
3. Controllare nuovamente l’indicatore: se necessario,
procedere con una nuova regolazione. Se si sono
introdotte grosse quantità di alimenti o si è aperta
frequentemente la porta del frigorifero, è normale che
l’indicatore non segni OK. Attendere almeno 10 h prima
di regolare la manopola FUNZIONAMENTO
FRIGORIFERO su una posizione più alta.
1
2
PLAY ZONE
*
: Con il nuovo ripiano portabottiglie “Play
Zone” è possibile raffreddare rapidamente tante
bottiglie, lattine e integratori ed averle sempre
comodamente a disposizione.
Se la “Play Zone” è adagiata al ripiano in vetro è
possibile collocare bottiglie di grossi e medi formati
semplicemente appoggiando la bottiglia. In questo
modo il vino, ad esempio, sarà conservato nel miglior
modo possibile.
Una volta piegata e fissata negli appositi fermi posti sul
lato del ripiano, si possono collocare le lattine (parte
alta), gli integratori (parte centrale) e altre lattine e
integratori adagiati nella parte rimanente del ripiano.
Fare attenzione, nel riporre le lattine, a non mandarle a
contatto con la parete posteriore del frigo.
La “Play Zone” puo’ essere usata come un normale
ripiano (una volta adagiata), lavata facilmente, anche in
lavastoviglie. La posizione idealedel ripiano con la "Play
Zone" è quella centrale.
*
Presente solo in alcuni modelli.
I
5
Avvio e utilizzo
Avviare lapparecchio
! Prima di avviare lapparecchio, seguire
le istruzioni sullinstallazione (
vedi Installazione
).
! Prima di collegare l’apparecchio pulire bene i vani
e gli accessori con acqua tiepida e bicarbonato.
1. Inserire la spina nella presa e accertarsi che
si accenda la lampada di illuminazione interna.
2. Ruotare la manopola per LA REGOLAZIONE DELLA
TEMPERATURA su un valore medio. Dopo qualche ora
sarà possibile inserire alimenti nel frigorifero.
Regolazione della temperatura
La temperatura all'interno del reparto frigorifero si regola
automaticamente in base alla posizione della manopola
del termostato.
= meno freddo
= più freddo
Si consiglia, comunque, una posizione media
Per aumentare lo spazio e disposizione e migliorare
l'aspetto estetico, questo apparecchio ha la "parte
raffreddante" posizionata all'interno della parete
posteriore del reparto frigo. Tale parete, durante il
funzionamento, si presenterà coperta di brina, oppure di
goccioline di acqua a secondo se il compressore è in
funzione o in pausa. Non preoccupatevi di questo! Il
frigorifero sta lavorando in modo normale.
Sistema di raffreddamento
L’apparecchio è dotato di uno dei sistemi di
raffreddamento descritti di seguito: è importante
riconoscerlo e tenerne conto per le modalità
di conservazione degli alimenti.
Aircooler
A
B
È riconoscibile dalla presenza del dispositivo sulla
parete superiore del vano frigorifero (
vedi figura
).
L’Aircooler consente un’ottima conservazione degli
alimenti perché ripristina velocemente la temperatura
dopo l’apertura della porta e distribuisce
omogeneamente la temperatura: l’aria soffiata (A) si
raffredda a contatto della parete fredda, mentre l’aria
più calda (B) viene aspirata (
vedi figura
).
La parete posteriore si presenta coperta di brina o
goccioline d’acqua a seconda che il compressore sia in
funzione o in pausa.
Statico
I modelli senza Aircooler hanno la parte raffreddante
nella parete interna posteriore dei vani; essa si
presenterà coperta di brina o di goccioline d’acqua a
seconda che il compressore sia in funzione o in pausa:
ognuno dei due casi è normale. Se si imposta la
manopola per LA REGOLAZIONE DELLA
TEMPERATURA su valori alti, con grossi quantitativi di
alimenti e con una temperatura ambiente elevata,
l’apparecchio può funzionare di continuo, favorendo
un’eccessiva formazione di brina ed eccessivi consumi
elettrici: ovviare spostando la manopola verso i valori
più bassi (verrà effettuato uno sbrinamento automatico).
Negli apparecchi statici l’aria circola in modo naturale:
quella più fredda tende a scendere perché più pesante.
Ecco come sistemare gli alimenti:
Cibo Disposizione nel frigorifero
'EVRIITIWGITYPMXS 7STVEMGEWWIXXMJVYXXEIZIVHYVE
*SVQEKKMJVIWGLM 7STVEMGEWWIXXMJVYXXEIZIVHYVE
'MFMGSXXM 7YUYEPWMEWMVMTMERS
7EPEQMTERIMR
GEWWIXXEGMSGGSPEXE
7YUYEPWMEWMVMTMERS
*VYXXEIZIVHYVE 2IMGEWWIXXMJVYXXEIZIVHYVE
9SZE 2IPPkETTSWMXSFEPGSRGMRS
&YVVSIQEVKEVMRE 2IPPkETTSWMXSFEPGSRGMRS
&SX XMKPMIFMFMXIPEX XI 2IKPMETTSWMXM FEPGSRGMRM
6
I
WATER LEVEL
MAX
WATER LEVEL
MAX
WATER LEVEL
MAX
Utilizzare al meglio il frigorifero
Per regolare la temperatura utilizzare la manopola per LA
REGOLAZIONE DELLA TEMPERATURA (
vedi Descrizione
).
Inserire soltanto alimenti freddi o appena tiepidi, non
caldi (
vedi Precauzioni e consigli
).
Ricordarsi che gli alimenti cotti non si mantengono più
a lungo di quelli crudi.
Non inserire liquidi in recipienti scoperti:
provocherebbero un aumento di umidità con
conseguente formazione di condensa.
Ligiene alimentare
1. Dopo l’acquisto degli alimenti, eliminare qualsiasi tipo
di confezione esterna in carta/cartone o altri involucri,
che potrebbero introdurre nel frigo batteri o sporcizia.
2. Proteggere gli alimenti, (in particolare quelli
facilmente deperibili e quelli che emanano un forte
aroma), in modo da evitate il contatto tra essi,
eliminando in questo modo sia la possibilità di
contaminazione di germi/batteri, che la diffusione di
particolari odori all’interno del frigo
3. Riporre i cibi in modo in modo che l’aria possa
circolare liberamente tra essi
4. Tenere pulito l’interno del frigo, facendo attenzione a
non utilizzare prodotti ossidanti o abrasivi
5. Togliere gli alimenti dal frigo una volta superata la
durata massima di conservazione
6. Per una buona conservazione, i cibi facilmente deperbili
( formaggi molli, pesce crudo, carne, etc…) vanno
posizionati nella zona più fredda, cioè quella sopra le
Utilizzare al meglio il congelatore
Non ricongelare alimenti che stanno per scongelare o
scongelati; tali alimenti devono essere cotti per
essere consumati (entro 24 ore).
Gli alimenti freschi da congelare non devono essere posti
a contatto con quelli già congelati; vanno sistemati nel
vano superiore CONGELAMENTO e CONSERVAZIONE
dove la temperatura scende sotto i -18°C e garantisce
una buona velocità di congelamento.
Non mettere nel congelatore bottiglie di vetro
contenenti liquidi, tappate o chiuse ermeticamente,
perché potrebbero rompersi.
La quantità massima giornaliera di alimenti da congelare
è indicata sulla targhetta caratteristiche, posta nel vano
frigorifero in basso a sinistra (esempio: Kg/24h 4).
Al fine di ottenere un spazio maggiore nel reparto
freezer potete togliere i cassetti dalle loro sedi (tranne
quello più in basso e l’eventuale cassetto COOL
CARE ZONE a temperatura variabile), sistemando gli
alimenti direttamente sulle piastre evaporanti.
! Durante il congelamento evitare di aprire la porta.
! In caso di interruzione di corrente o di guasto, non
aprire la porta del congelatore: in questo modo congelati
e surgelati si conserveranno senza alterazioni per circa
9-14 ore.
! Se per lungo tempo permane la temperatura ambiente
più fredda di 14°C, non si raggiungono completamente
le temperature necessarie per una lunga conservazione
nel reparto freezer e il periodo di conservazione risulterà
pertanto ridotto.
Bacinella ghiaccio Ice
3
.
Il fatto di essere poste sulla parte superiore dei cassetti
riposti nel vano freezer assicura una maggiorepulizia: (il
ghiaccio non viene più a contatto con gli alimenti) ed
ergonomia (non si sgocciola in fase di caricamento).
1. Estrarre la bacinella spingendola verso l’alto.
Verificare che la bacinella sia completamente vuota e
riempirla d’acqua attraverso l’apposito foro.
2. Fare attenzione a non superare il livello indicato (MAX
WATER LEVEL). Troppa acqua ostacola la fuoriuscita
dei ghiaccioli (se succede, attendere che il ghiaccio
si sciolga e svuotare la bacinella).
3. Ruotare la bacinella di 90°: l’acqua riempie le forme
per il principio dei vasi comunicanti (
vedi figura
).
4. Chiudere il foro con il coperchio in dotazione e riporre
la bacinella, inserendo la parte superiore nell’apposita
sede e facendola ricadere.
5. Quando il ghiaccio sarà formato (tempo minimo circa
8 ore) battere la bacinella su una superficie dura e
bagnarne l’esterno per far staccare i ghiaccioli; farli
poi uscire dal foro.
I
7
Manutenzione e cura
Escludere la corrente elettrica
Durante i lavori di pulizia e manutenzione è necessario
isolare l’apparecchio dalla rete di alimentazione
staccando la spina dalla presa.
Non è sufficiente portare la manopola per la regolazione
della temperatura sulla posizione
(apparecchio
spento) per eliminare ogni contatto elettrico.
Pulire lapparecchio
Le parti esterne, le parti interne e le guarnizioni in
gomma possono essere pulite con una spugnetta
imbevuta di acqua tiepida e bicarbonato di sodio o
sapone neutro. Non usare solventi, abrasivi,
candeggina o ammoniaca.
Gli accessori estraibili possono essere messi a bagno
in acqua calda e sapone o detersivo per piatti.
Sciacquarli e asciugarli con cura.
Il retro dell’apparecchio tende a coprirsi di polvere,
che può essere eliminata utilizzando con delicatezza,
dopo aver spento l'apparecchio e staccato la presa di
corrente, la bocchetta lunga dell’aspirapolvere,
impostato su una potenza media.
Evitare muffe e cattivi odori
L’apparecchio è fabbricato con materiali igienici
che non trasmettono odori. Per mantenere questa
caratteristica è necessario che i cibi vengano sempre
protetti e chiusi bene. Ciò eviterà anche
la formazione di macchie.
Nel caso si voglia spegnere l’apparecchio per un lungo
periodo, pulire l’interno e lasciare le porte aperte.
Sbrinare lapparecchio
! Attenersi alle istruzioni sottostanti.
Non accelerare il processo con dispositivi o utensili
diversi dal raschietto in dotazione, perché si potrebbe
danneggiare il circuito refrigerante.
Sbrinare il vano frigorifero
Il frigorifero è dotato di sbrinamento automatico: l’acqua
viene convogliata verso la parte posteriore da un
apposito foro di scarico (
vedi figura
) dove il calore
prodotto dal compressore
la fa evaporare. L’unico
intervento da fare
periodicamente consiste
nel pulire il foro di scarico
affinché l’acqua possa
defluire liberamente.
Sbrinare il vano congelatore
Eliminare periodicamente la brina con l’apposito
raschietto in dotazione. Se lo strato di brina è superiore
ai 5 mm è necessario effettuare lo sbrinamento
manuale:
1. posizionare la manopola per LA REGOLAZIONE
DELLA TEMPERATURA nella posizione
.
2. Avvolgere surgelati e congelati in carta da giornale e
metterli in un altro congelatore o in un luogo fresco.
3. Lasciare aperta la porta finché la brina non si sia
sciolta completamente; facilitare l’operazione
sistemando nel vano congelatore contenitori con
acqua tiepida.
4. Alcuni apparecchi sono dotati del SISTEMA DRAIN
per convogliare l’acqua
all’esterno: lasciare che
l'acqua defluisca in un
contenitore (
vedi figura
).
5. Pulire e asciugare con cura il vano congelatore prima
di riaccendere l’apparecchio.
6. Prima di inserire i cibi nel vano congelatore attendere
circa 2 ore per il ripristino delle condizioni ideali di
conservazione.
Sostituire la lampadina
Per sostituire la lampadina di illuminazione del vano
frigorifero, staccare la spina dalla presa di corrente.
Seguire le istruzioni riportate qui sotto.
Accedere alla lampada togliendo la protezione come
indicato in figura.
Sostituirla con una analoga di potenza a quella indicata
sulla protezione (15 W o 25 W).
1 1
2
8
I
Precauzioni e consigli
! L’apparecchio è stato progettato e costruito
in conformità alle norme internazionali di sicurezza.
Queste avvertenze sono fornite per ragioni
di sicurezza e devono essere lette attentamente.
Questa apparecchiatura è conforme
alle seguenti Direttive Comunitarie:
- 73/23/CEE del 19/02/73 (Bassa Tensione)
e successive modificazioni;
- 89/336/CEE del 03/05/89 (Compatibilità
Elettromagnetica) e successive modificazioni;
- 2002/96/CE.
Sicurezza generale
L’apparecchio è stato concepito per un uso di tipo
non professionale all’interno dell’abitazione.
L’apparecchio deve essere usato per conservare
e congelare cibi, solo da persone adulte e secondo le
istruzioni riportate in questo libretto.
L’apparecchio non va installato all’aperto, nemmeno
se lo spazio è riparato, perché è molto pericoloso
lasciarlo esposto a pioggia e temporali.
Non toccare l’apparecchio a piedi nudi o con le mani
o i piedi bagnati o umidi.
Non toccare le parti interne raffreddanti: c’è pericolo
di ustionarsi o ferirsi.
Non staccare la spina dalla presa della corrente
tirando il cavo, bensì afferrando la spina.
È necessario staccare la spina dalla presa prima di
effettuare operazioni di pulizia e manutenzione. Non è
sufficiente portare la manopola per LA
REGOLAZIONE DELLA TEMPERATURA sulla
posizione
(apparecchio spento) per eliminare ogni
contatto elettrico.
In caso di guasto, in nessun caso accedere ai
meccanismi interni per tentare una riparazione.
Non usare, all’interno dei vani, dispositivi o utensili
diversi dal raschietto fornito in dotazione.
Non mettere in bocca cubetti appena estratti dal
congelatore.
Non permettere ai bambini di giocare con
l’apparecchio. In nessun caso devono sedersi sui
cassetti o appendersi alla porta.
Gli imballaggi non sono giocattoli per bambini.
Smaltimento
Smaltimento del materiale di imballaggio: attenersi
alle norme locali, così gli imballaggi potranno essere
riutilizzati.
La direttiva Europea 2002/96/CE sui rifiuti di
apparecchiature elettriche ed elettroniche (RAEE),
prevede che gli elettrodomestici non debbano essere
smaltiti nel normale flusso dei rifiuti solidi urbani. Gli
apparecchi dismessi devono essere raccolti
separatamente per ottimizzare il tasso di recupero e
riciclaggio dei materiali che li compongono ed
impedire potenziali danni per la salute e l’ambiente. Il
simbolo del cestino barrato è riportato su tutti i
prodotti per ricordare gli obblighi di raccolta separata.
Per ulteriori informazioni, sulla corretta dismissione
degli elettrodomestici, i detentori potranno rivolgersi
al servizio pubblico preposto o ai rivenditori.
Risparmiare e rispettare lambiente
Installare l’apparecchio in un ambiente fresco e ben
aerato, proteggerlo dall’esposizione diretta ai raggi
solari, non disporlo vicino a fonti di calore.
Per introdurre o estrarre gli alimenti, aprire le porte
dell’apparecchio il più brevemente possibile.
Ogni apertura delle porte causa un notevole
dispendio di energia.
Non riempire con troppi alimenti l’apparecchio: per
una buona conservazione, il freddo deve poter
circolare liberamente. Se si impedisce la circolazione,
il compressore lavorerà continuamente.
Non introdurre alimenti caldi: alzerebbero la
temperatura interna costringendo il compressore a un
grosso lavoro, con grande spreco di energia elettrica.
Sbrinare l’apparecchio qualora si formasse del
ghiaccio (
vedi Manutenzione
); uno spesso strato di
ghiaccio rende più difficile la cessione di freddo agli
alimenti e fa aumentare il consumo di energia.
I
9
Anomalie e rimedi
Può accadere che l’apparecchio non funzioni. Prima di telefonare all’Assistenza (
vedi Assistenza
), controllare
che non si tratti di un problema facilmente risolvibile aiutandosi con il seguente elenco.
Possibili cause / Soluzione:
La spina non è inserita nella presa della corrente o non abbastanza da fare
contatto, oppure in casa non c’è corrente.
Le porte non chiudono bene o le guarnizioni sono rovinate.
Le porte vengono aperte molto spesso.
La manopola per LA REGOLAZIONE DELLA TEMPERATURA non è in
posizione corretta
Il frigorifero o il congelatore sono stati riempiti eccessivamente.
La temperatura ambiente di lavoro del prodotto è inferiore a 14°C.
La manopola per LA REGOLAZIONE DELLA TEMPERATURA non è in
posizione corretta.
Gli alimenti sono a contatto con la parete posteriore.
La porta del frigorifero è aperta
I sistema AIR si attiva automaticamente solo quando necessario per
ripristinare le condizioni ottimali all’interno del vano frigorifero
La porta non è ben chiusa o viene aperta di continuo.
La temperatura dell’ambiente esterno è molto alta.
Lo spessore della brina supera i 2-3 mm (
vedi Manutenzione
).
L’apparecchio non è stato installato ben in piano (
vedi Installazione
)
.
L’apparecchio è stato installato tra mobili o oggetti che vibrano
ed emettono rumori.
Il gas refrigerante interno produce un leggero rumore anche quando
il compressore è fermo: non è un difetto, è normale.
Le temperature elevate sono necessarie per evitare la formazioni di
condensa in particolari zone del prodotto
.
Si tratta del normale funzionamento del prodotto.
Il foro di scarico dell’acqua è otturato (
vedi Manutenzione
).
Anomalie:
La lampada di illuminazione
interna non si accende.
Il frigorifero e il congelatore
raffreddano poco.
Nel frigorifero gli alimenti
si gelano.
La ventola AIR non gira
Il motore funziona di continuo.
Lapparecchio emette
molto rumore.
La temperatura di alcune parti
esterne del frigorifero è elevata
La parete in fondo alla cella frigo
presenta brina o goccioline di
acqua
Sul fondo del frigo cè dellacqua.
10
I
Assistenza
195049892.01
10/2005 - Xerox Business Services
Prima di contattare lAssistenza:
Verificare se l’anomalia può essere risolta autonomamente (
vedi Anomalie e Rimedi
).
In caso negativo, contattare il Numero Unico Nazionale 199.199.199.
Comunicare:
il tipo di anomalia
il modello della macchina (Mod.)
il numero di serie (S/N)
Queste informazioni si trovano
sulla targhetta caratteristiche posta
nel vano frigorifero in basso a sinistra.
Assistenza Attiva 7 giorni su 7
Se nasce il bisogno di assistenza o manutenzione basta chiamare il Numero Unico Nazionale 199.199.199*
per essere messi subito in contatto con il Centro Assistenza Tecnica più vicino al luogo da cui si chiama.
È attivo 7 giorni su 7, sabato e domenica compresi, e non lascia mai inascoltata una richiesta.
* Al costo di 14,25 centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 08:00 alle 18:30, il Sab. dalle
08:00 alle 13:00 e di 5,58 centesimi di Euro al minuto (iva inclusa) dal Lun. al Ven. dalle 18:30 alle 08:00, il Sab.
dalle 13:00 alle 08:00 e i giorni festivi, per chi chiama dal telefono fisso.
Per chi chiama da radiomobile le tariffe sono legate al piano tariffario dell’operatore telefonico utilizzato.
Le suddette tariffe potrebbero essere soggette a variazione da parte dell’operatore telefonico; per maggiori
informazioni consultare il sito www.indesit.com.
Mod.
RG 2330
TI
Cod.
93139180000 S/N 704211801
220 - 240 V- 50 Hz 150 W
W
Fuse
A
Max 15 w
Total
Gross
Bruto
Brut
Compr.
Kompr.
Syst.
R 134 a
kg 0,090
Gross
Bruto
Brut
340
Net
Util
Utile
Gross
Bruto
Brut
Freez. Capac
Poder de Cong
75
Made in Italy 13918
Test
P.S-I.
Pressure
HIGH-235
LOW 140
kg/24 h
4,0
Class
Clase
N
Classe
modello
numero di serie
GB
REFRIGERATOR/FREEZER COMBINATION
Contents
Installation, 12
Positioning and connection
Reversible doors
Description of the appliance, 13
Overall view
Accessories, 14
Start-up and use, 15-16
Starting the appliance
Chiller system
Using the refrigerator to its full potential
Using the freezer to its full potential
Maintenance and care, 17
Switching the appliance off
Cleaning the appliance
Avoiding mould and unpleasant odours
Defrosting the appliance
Replacing the light bulb
Precautions and tips, 18
General safety
Disposal
Respecting and conserving the environment
Troubleshooting, 19
Assistance, 20
Operating Instructions
BAAN 13 PX
Italiano, 1
Français, 21
English,11
GBI F
Espanol
, 41
E
Deutsch
, 31
D
12
GB
Installation
! Before placing your new appliance into operation please
read these operating instructions carefully. They contain
important information for safe use, for installation and for
care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of
the appliance and any furniture above it, and at least 5
cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat
(direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers supplied
in the installation kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the
refrigerator by tightening or loosening the rear feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to
the electricity mains. Before inserting the plug into the
electrical socket ensure the following:
The appliance is earthed and the plug is compliant with
the law.
The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located on
the bottom left side of the fridge (e.g. 150 W).
The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (
see Assistance
). Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should these
safety measures not be observed.
Reversible doors
1
2
3
4
5
3mm
GB
13
Description of the
appliance
Overall view
The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not
directly represent the appliance purchased. For more complex features, consult the following pages.
Varies by number and/or position.
*
Available only on certain models.
Levelling FEET
Removable lidded
shelf with EGG TRAY
Removable
multipurpose
SHELVES
BOTTLE shelf
Ice
3
ice tray
SHELVES•
Ice
3
ice tray
FREEZER and
STORAGE
compartment
STORAGE
compartment
TEMPERATURE
REGULATING
Knob
LAMP
(
see Maintenance
)
MULTI-USE
*
bin
FRUIT and
VEGETABLE
bin
FLEX COOL BOX
for MEAT
and
CHEESE
*
14
GB
Accessories
SHELVES: with or without grill.
Due to the special guides the
shelves are removable and the
height is adjustable (
see
diagram
), allowing easy storage
of large containers and food.
Height can be adjusted without
complete removal of the shelf.
MULTI-USE
*
bin: to store food (such as cold meats)
for a long time and also prevent odours from lingering
in the refrigerator.
FLEX COOL BOX
*
This is the new box to keep meat, fish and cheese
fresh.
When positioned in the “lower” part of the fridge
compartment, it is ideal for meat and fish; when moved
to the “top” part of the fridge, it is perfect for cheese.
It
can be taken out of the fridge when it is not needed.
TEMPERATURE
*
Indicator light: to identify the coldest
area in the refrigerator.
1. Check that OK appears clearly on the indicator light
(
see diagram
).
vert
noir
consulter la notice
2. If the word “OK” does not appear it means that the
temperature is too high: adjust the REFRIGERATOR
OPERATION knob to a higher (colder) position and
wait approximately 10 hours until the temperature has
stabilised.
3. Check the indicator light again: if necessary, readjust
it following the initial process. If large quantities of
food have been added or if the refrigerator door has
been opened frequently, it is normal for the indicator
not to show OK. Wait at least 10 hours before
adjusting the REFRIGERATOR OPERATION knob to a
higher setting.
PLAY ZONE
*
Thanks to the new “Play Zone” bottle
rack, you can cool several bottles, cans and energy
drinks quickly to have them constantly at hand.
If the “Play Zone” is placed on the glass shelf, you can
store large and medium sized bottles on it simply by
laying the bottle on the flat rack.
This is ideal for storing
wine bottles.
When folded and secured in place on either
side of the shelf, the rack can be used to store cans (at
the top), energy drinks (in the centre) and other cans
and energy drinks can be rested horizontally on the
remaining part of the shelf.
When placing cans (onto the
Play zone rack), make sure they do not touch the back
of the refrigerator interior.
The “Play Zone” can be used just like a normal shelf
(when placed flat) and moved up or down along the
fridge walls together with the rest of the shelf. It can be
washed easily, and is also dishwasher safe. The ideal
position for the Play zone rack is the central shelf.
*
Available only on certain models.
1
2
GB
15
Start-up and use
Starting the appliance
! Before starting the appliance, follow the installation
instructions (
see Installation
).
! Before connecting the appliance, clean the
compartments and accessories well with lukewarm
water and bicarbonate.
1. Insert the plug into the socket and ensure that the
internal light illuminates.
2. Turn the TEMPERATURE ADJUSTMENT knob to an
average value. After a few hours you will be able to
put food in the refrigerator.
Setting the temperature
The temperature inside the refrigerator compartment
automatically adjusts itself according to the position of
the thermostat knob.
= warmest
= coldest
We recommend, however, a medium position.
The cooling section of the refrigerator is located inside
the back wall of the refrigerator compartment for
increased space and improved aesthetics. During
operation, the back wall will be covered in frost or water
droplets depending on whether the compressor is
operating or paused. Do not worry, the refrigerator is
functioning normally.
Chiller system
The appliance comes with one of the chiller systems
described below: take note of your system in order to
determine the most efficient food storage method.
)RRG
$ UUDQJHPHQ WLQVLGHWKH
UHIULJHUDWRU
Fresh fish and meat
Above the fruit and vegetable
bins
Fresh cheese
Above the fruit and vegetable
bins
Cooked food On any shelf
Salami, bread loaf,
chocolate
On any shelf
Fruit and vegetables In the fruit and vegetable bins
Eggs On the shelf provided
Butter and margarine On the shelf provided
Bottles, drinks, milk On the shelf provided
Aircooler
A
B
It is recognizable due to the presence of the mechanism
on the top part of the refrigerator compartment (
see
diagram
). The Aircooler maintains a constant fridge
temperature to keep food fresher for longer and will
quickly restore the temperature to the correct level, even
if the door is opened frequently: the blown air (A) is
cooled when it comes into contact with the cold wall,
whereas the hotter air (B) is sucked up (
see diagram
).
The back wall may be covered in frost or droplets of
water, depending on whether the compressor is in
operation or whether it is paused.
Static
Models without the Aircooler have the cooling section in
the internal back wall of the compartments. The wall will
be covered in frost or water droplets depending on
whether the compressor is operating or paused: both
cases are normal. If the TEMPERATURE ADJUSTMENT
knob has been set on high values with large quantities
of food and with a high ambient temperature, the
appliance can operate continuously, resulting in
excessive frost formation and excessive energy
consumption: compensate for this by shifting the knob
towards lower values (defrosting will occur
automatically).
In static appliances, the air circulates in a natural way:
the colder air tends to move downwards as it is heavier.
The food should be stored as follows:
16
GB
Using the refrigerator to its full potential
Use the TEMPERATURE ADJUSTMENT knob to adjust
the temperature (
see Description
).
Place only cold or lukewarm foods in the ompartment,
not hot foods (
see Precautions and tips
).
Remember that cooked foods do not last longer than
raw foods.
Do not store liquids in open containers. They will
increase humidity in the refrigerator and cause
condensation to form.
1. Once you have bought your food, remove all external
packaging made of paper/cardboard or other
wrappers, which could introduce bacteria or dirt
inside your refrigerator.
2. Protect the food, (especially easily perishable items
and those that have a strong smell), in order to avoid
contact between them, thereby removing both the
possibility of germ/bacteria contamination as well as
the diffusion of strong odours inside the fridge.
3. Store all food in such a way as to ensure air can
circulate freely between different items.
4. Keep the inside of your fridge clean, taking care not
to use oxidiser or abrasive products.
5. Remove all food past its expiry date from the refrigerator.
6. For the correct preservation of food, all easily
perishable items (soft cheeses, raw fish, meat, etc.)
should be stored in the coldest zone of the fridge
compartment, i.e. just above the salad crisper where
the temperature indicator is situated.
Using the freezer to its full potential
Do not re-freeze food that is defrosting or that has
already been defrosted. These foods must be cooked
and eaten (within 24 hours).
Fresh food that needs to be frozen must not come into
contact with food that has already been defrosted.
Fresh food must be stored in the top FREEZER and
STORAGE compartment where the temperature drops
below -18°C and guarantees rapid freezing.
Do not place glass bottles which contain liquids, and
which are corked or hermetically sealed in the freezer
because they could break.
The maximum quantity of food that may be frozen daily
is indicated on the plate containing the technical
properties located on the bottom left side of the
refrigerator compartment (for example: Kg/24h: 4).
In order to obtain a greater amount of space in the
freezer compartment, you may remove the bins
(except the lowest bin and the special COOL CARE
ZONE bin, which has an adjustable temperature) and
place the food directly onto the evaporator plates.
! Do not open the door during freezing.
! If there is a power cut or malfunction, do not open the
freezer door. This will help maintain the temperature
inside the freezer, ensuring that foods are conserved for
at least 9 -14 hours.
! If the room temperature drops below 14°C for an
extended period of time, the ideal temperature will not
be reached in the freezer compartment and food
preservation will be reduced.
Ice
3
ice tray
The fact that they are situated on the top part of the freezer
drawers ensures greater cleanliness: the ice no longer comes
into contact with the food placed inside the freezer
compartment; furthermore, the dripping of the water during
filling is avoided (a lid to cover up the hole after filling with
water is also provided).
1. Pull out the tray by pushing it up.
Check that the tray is ompletely empty and fill it with
water through the opening provided.
2. Take care not to exceed the level indicated (MAX
WATER LEVEL). Excess water prevents the ice cubes
from dispensing (if this happens, wait for the ice to
melt and empty the tray).
3. Turn the tray 90°: due to the connected compartments
each mould fills with water (
see diagram
).
4. Close the opening with the lid provided and put the
tray back, placing the top part in the corresponding
housing and allowing it to drop in again.
5. When the ice has formed (minimum time
approximately 8 hours) knock the tray against a hard
surface and wet the outside so that the ice cubes
come loose and take them out through the opening.
WATER LEVEL
MAX
WATER LEVEL
MAX
WATER LEVEL
MAX
GB
17
Maintenance and care
Switching the appliance off
During cleaning and maintenance it is necessary to
disconnect the appliance from the electricity supply.
It is not sufficient to set the temperature adjustment
knobs on
(appliance off) to eliminate all electrical
contact.
Cleaning the appliance
The external and internal parts, as well as the rubber
seals may be cleaned using a sponge that has been
soaked in lukewarm water and bicarbonate of soda or
neutral soap. Do not use solvents, abrasive products,
bleach or ammonia.
The removable accessories may be soaked in warm
water and soap or dishwashing liquid. Rinse and dry
them carefully.
The back of the appliance may collect dust which can
be removed by delicately using the hose of a vacuum
cleaner set on medium power. The appliance must be
switched off and the plug must be pulled out before
cleaning the appliance.
Avoiding mould and unpleasant odours
The appliance is manufactured with hygienic materials
which are odour free. In order to maintain an odour free
refrigerator and to prevent the formation of stains, food
must always be covered or sealed properly.
If you want to switch the appliance off for an extended
period of time, clean the inside and leave the doors
open.
Defrosting the appliance
! Follow the instructions below.
Do not speed up the defrosting process by using any
devices or tools other than the scraper provided, you
may damage the refrigeration circuit.
Defrosting the refrigerator compartment
The refrigerator has an automatic defrosting function:
water is ducted to the
back of the appliance by a
special discharge outlet
(
see diagram
) where the
heat produced by the
compressor causes it to
evaporate. It is necessary
to clean the discharge
hole regularly so that the
water can flow out easily.
Defrosting the freezer compartment
Remove frost regularly using the special scraper
provided. If the frost layer is greater than 5 mm, it is
necessary to defrost manually:
1. Set the TEMPERATURE ADJUSTMENT knob to the
position
.
2. Wrap frozen foods in newspaper and place them in
another freezer or in a cool place.
3. Leave the door open until the frost has melted
completely. This can be made easier by placing
containers with lukewarm water in the freezer
compartment.
4. Certain appliances are
fitted with the DRAIN
SYSTEM to lead the water
outside: let the water flow
into a container (
see
diagram
).
5. Clean and dry the freezer compartment carefully
before switching the appliance on again.
6. Wait for approximately 2 hours, i.e. until the ideal
storage conditions have been restored, before
placing food in the freezer compartment.
Replacing the light bulb
To replace the light bulb in the refrigerator compartment,
pull out the plug from the electrical socket. Follow the
instructions below.
Access the light bulb by removing the cover as
indicated in the diagram.
Replace it with a similar light bulb within the power
range indicated on the cover (15W or 25W).
1 1
2
18
GB
Precautions and tips
! The appliance was designed and manufactured in
compliance with international safety standards. The
following warnings are provided for safety reasons and
must be read carefully.
This appliance complies with the following
Community Directives:
- 73/23/EEC of 19/02/73 (Low Voltage) and
subsequent amendments;
-89/336/EEC of 03.05.89 (Electromagnetic
Compatibility) and subsequent amendments;
- 2002/96/CE.
General safety
The appliance was designed for domestic use inside
the home and is not intended for commercial or
industrial use.
The appliance must be used to store and freeze food
products by adults only and according to the
instructions in this manual.
The appliance must not be installed outdoors, even in
covered areas. It is extremely dangerous to leave the
appliance exposed to rain and storms.
Do not touch the appliance with bare feet or with wet or
moist hands and feet.
Do not touch the internal cooling elements: this could
cause skin abrasions or frost/freezer burns.
When unplugging the appliance always pull the plug
from the mains socket, do not pull on the cable.
Before cleaning and maintenance, always switch off
the appliance and disconnect it from the electrical
supply. It is not sufficient to set the temperature
adjustment knobs on
(appliance off) to eliminate all
electrical contact.
In the case of a malfunction, under no circumstances
should you attempt to repair the appliance yourself.
Repairs carried out by inexperienced persons may
cause injury or further malfunctioning of the appliance.
Do not use devices or tools other than the special
scraper provided inside the compartments.
Do not put ice cubes taken directly from the freezer
into your mouth.
Do not allow children to tamper with the controls or
play with the appliance. Under no circumstance should
they be allowed to sit on the bins or to hang from the
door.
Keep packaging material out of the reach of children! It
can become a choking or suffocation hazard.
Disposal
Observe local environmental standards when
disposing packaging material for recycling purposes.
The European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be
disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected separately
in order to optimise the recovery and recycling of the
materials they contain and reduce the impact on
human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the
appliance it must be separately collected.
Consumers should contact their local authority or
retailer for information concerning the correct disposal
of their old appliance.
Respecting and conserving the
environment
Install the appliance in a fresh and well-ventilated
room. Ensure that it is protected from direct sunlight
and do not place it near heat sources.
Try to avoid keeping the door open for long periods or
opening the door too frequently in order to conserve
energy.
Do not fill the appliance with too much food:
cold air must circulate freely for food to be preserved
properly. If circulation is impeded, the compressor will
work continuously.
Do not place hot food directly into the refrigerator. The
internal temperature will increase and force the
compressor to work harder and will consume more
energy.
Defrost the appliance if ice forms (
see Maintenance
).
A thick layer of ice makes cold transference to food
products more difficult and results in increased
energy consumption.
Regularly check the door seals and wipe clean to
ensure they are free of debris and to prevent cold air
from escaping (
see Maintenance
).
GB
19
Troubleshooting
If the appliance does not work, before calling for Assistance (
see Assistance
), check for a solution from the following list.
Malfunctions:
The internal light does not
illuminate.
The refrigerator and the freezer do
not cool well.
The food inside the refrigerator is
beginning to freeze.
The AIR fan does not rotate
The motor runs continuously.
The appliance makes a lot of noise.
Some of the external parts of the
refrigerator become hot
The back wall of the refrigerator unit
is covered in frost or droplets of
water
There is water at the bottom of the
refrigerator.
Possible causes / Solutions:
The plug has not been inserted into the electrical socket, or not far
enough to make contact, or there is no power in the house.
The doors do not close properly or the seals are damaged.
The doors are opened too frequently.
The TEMPERATURE ADJUSTMENT knob is not in the correct position
The refrigerator or the freezer have been over-filled.
The atmospheric temperature of the area surrounding the appliance is
lower than 14°C.
The TEMPERATURE ADJUSTMENT knob is not in the correct position.
The food is in contact with the back inside wall of the refrigerator.
The refrigerator door is open.
The AIR system is only activated automatically when it becomes
necessary to restore perfect operational conditions inside the refrigerator
compartment.
The door is not closed properly or is continuously opened.
The outside ambient temperature is very high.
The thickness of the frost exceeds 2-3 mm (
see Maintenance
).
The appliance has not been installed on a level surface (
see Installation
)
.
The appliance has been installed between cabinets that vibrate and
make noise.
The internal refrigerant makes a slight noise even when the compressor is
off. This is not a defect, it is normal.
These raised temperatures are necessary in order to avoid the formation
of condensation on certain parts of the product.
This shows the appliance is operating normally.
The water discharge hole is blocked (
see Maintenance
).
20
GB
195049892.01
10/2005 - Xerox Business Services
Assistance
Before calling for Assistance:
Check if the malfunction can be solved on your own (
see Troubleshooting
).
If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service
Centre
Communicating:
type of malfunction
appliance model (Mod.)
serial number (S/N)
This information can be found on the data
plate located on the bottom left side of the
refrigerator compartment.
Never call on unauthorized technicians and always refuse spare parts which are not originals.
Mod.
RG 2330
TI
Cod.
93139180000 S/N 704211801
220 - 240 V- 50 Hz 150 W
W
Fuse
A
Max 15 w
Total
Gross
Bruto
Brut
Compr.
Kompr.
Syst.
R 134 a
kg 0,090
Gross
Bruto
Brut
340
Net
Util
Utile
Gross
Bruto
Brut
Freez. Capac
Poder de Cong
75
Made in Italy 13918
Test
P.S-I.
Pressure
HIGH-235
LOW 140
kg/24 h
4,0
Class
Clase
N
Classe
model serial number
1 / 1

Indesit BAAN 13 PX Manuale del proprietario

Categoria
Frigoriferi
Tipo
Manuale del proprietario