Samsung SH18ZP0D Manuale utente

Marca: Samsung

Modello: SH18ZP0D

Categoria: Condizionatori d'aria a sistema split

Tipo: Manuale utente

Questo manuale è adatto anche per

E§§HNIKA

ENGLISH

OWNER’S INSTRUCTIONS

MANUAL DE INSTRUCCIONES

MANUEL D’UTILISATION

ISTRUZIONI PER L’USO

MANUAL DE INSTRUÇÕES

GEBRAUCHSANWEISUNG

√¢∏°π∂™ Ãƒ∏™∆∏

Split-type Room Air Conditioner (Cool and Heat)

Aire acondicionado doméstico sistema Split (Refrigeración y Calefacción)

Climatiseur de type Séparé

(Refroidissement et Chauffage)

Condizionatore d’aria per ambienti ad unità Separate (Raffreddamento e Riscaldamento)

Aparelho de ar condicionado tipo Split (Refrigeração e Aquecimento)

Geteilte raumklimaanlage

(Kühlen und Wärmen)

¢IAIPOYMENO K§IMATI™TIKO ¢øMATIOY (æ‡ÍË˜ Î·È £¤ÚÌ·ÓÛË˜)

ESPAÑOL

FRANÇAIS

ITALIANO

PORTUGUÊS

DEUTSCH

E S F I P D G DB98-20924A(2)

Indoor unit Outdoor unit

AQ07P2GED

SH07APGD

SH07ZP2D

AQ09P2GBD

AQ09P2GED

SH09APGD

SH09ZP2D

AQ12P4GBD

AQ12P4GED

SH12APGD

SH12ZP4D

AQ18P0GBD

AQ18P0GED

SH18AP0D

SH18ZP0D

AQ24P6GBD

AQ24P6GED

SH24AP6D

SH24ZP6D

UQ07P2GED

SH07APGDX

SH07ZP2DX

UQ09P2GBD

UQ09P2GED

SH09APGDX

SH09ZP2DX

UQ12P4GBD

UQ12P4GED

SH12APGDX

SH12ZP4DX

UQ18P0GBD

UQ18P0GED

SH18AP0DX

SH18ZP0DX

UQ24P6GBD

UQ24P6GED

SH24AP6DX

SH24ZP6DX

E-2

Safety Precautions

The following safety precautions must be taken when using your air conditioner.

◆ Users of this product are cautioned not to attempt repair of this product

at their own discretion. Instead, they are requested to directly contact a

designated service center or the outlet at which the product was

purchased.

◆ Never spill any kind of liquid into the unit. Should this happen, unplug

or main switch off the unit and contact an authorized service center.

◆ Do not insert anything between the air outlet blades because the inner

fan may be damaged and could cause injury. Keep children away from

the unit.

◆ Do not place any obstacles in front of the unit.

◆ Do not spray liquid of any kind into the indoor unit. Should this happen,

switch off the breaker used for your air conditioner and contact your

installation specialist.

◆ Make sure that the unit is correctly ventilated at all times:

Do not place clothing or other materials over it.

◆ If the wireless remote control will not be used for a long time, remove

the batteries. (If applicable)

◆ When using a wireless remote control, the distance should not be more

than 7 meters from the air conditioner. (If applicable)

WARNING

DURING OPERATION

◆ Never store or ship the air conditioner upside down or sideways to

avoid damage to the compressor.

◆ The appliance is not intended for use by young children or infirm

persons without supervision: Young children should be supervised to

ensure that they do not play with the appliance.

◆ Max current is measured according to IEC standard for safety and

current is measured according to ISO standard for energy efficiency.

OTHERS

◆ Before throwing out the device, it is necessary to pull back the battery

cells and get rid of them safely for recycling reasons.

◆ When you need to dispose of the unit, consult your dealer. If pipes are

removed incorrectly, refrigerant may blow out and come into contact

with your skin, causing injury. Releasing refrigerant into the atmosphere

also damages the environments.

◆ Please recycle or dispose of the packaging material for this product in

an environmentally responsible manner.

ISPOSING OF THE UNIT

Risk of electric shock. • Can cause injury or death. • Disconnect all

remote electric power supplies before servicing, installing or cleaning.

• This must be done by the manufacturer or its service agent or a similar

qualified person in order to avoid a hazard.

E-3

ENGLISH

Contents

◆

REPARING YOUR AIR CONDITIONER

■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

■ Remote Control-Buttons and Display . . . . . . . . . . . . . . . . . . . . . . 6

■ Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ Inserting the Remote Control Batteries . . . . . . . . . . . . . . . . . . . . . 8

◆

PERATING YOUR AIR CONDITIONER

■ Selecting the Automatic Operating Mode . . . . . . . . . . . . . . . . . . . 9

■ Cooling Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

■ Heating Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Changing the Room Temperature Quickly . . . . . . . . . . . . . . . . . . 12

■ Removing Excess Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ Airing Your Room . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■ Selecting Energy Saving Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ Generating Anions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Adjusting the Air Flow Direction Vertically . . . . . . . . . . . . . . . . . . . 17

■ Adjusting the Air Flow Direction Horizontally . . . . . . . . . . . . . . . . 17

◆

ROGRAMMING YOUR AIR CONDITIONER

■ Setting the On Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

■ Setting the Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

■ Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

◆

ECOMMENDATIONS FOR USE

■ Operating Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

■ Temperature and Humidity Ranges . . . . . . . . . . . . . . . . . . . . . . . . 22

■ Operating Your Air Conditioner Without the Remote Control . . . . . 22

■ Solving Common Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Cleaning Your Air Conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Cleaning Deodorizing and Bio Filters (Option) . . . . . . . . . . . . . . . 25

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be disposed with other household

wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable

reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government

office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for disposal.

View of the Unit

E-4

◆ If you want to turn on/off the Display during operation,

press the button on the remote control.

◆ The room temperature sensor senses air temperature around

the sensor, and shows the temperature on the display.

Indoor Unit

Air filter

(under the grille)

Air flow blades

(outlet)

Remote Control Sensor

On/Off switch

Timer indicator

Fan speed setting

Sleep Timer indicator

Operation indicator

Set temperature &

room temperature

Anions indicator

Auto grille

Air Inlet

Room temperature sensor

The design and shape are subject to change according to the model.

E-5

ENGLISH

Air Inlet(Rear)

Air Outlet

Connection Valve

(inside)

Outdoor Unit

SH07APGDX SH09APGDX

Air Inlet(Rear)

Air Outlet

Connection Valve

Outdoor Unit

UQ07P2GED SH07ZP2DX

UQ09P2GBD UQ09P2GED SH09ZP2DX

UQ12P4GBD UQ12P4GED SH12ZP4DX

Air Inlet (Rear)

Air Outlet

Connection Valve

(inside)

Outdoor Unit

SH12APGDX

Air Inlet (Rear)

Air Outlet

Connection Valve

Outdoor Unit

UQ18P0GBD UQ18P0GED SH18AP0DX SH18ZP0DX

UQ24P6GBD UQ24P6GED SH24AP6DX SH24ZP6DX

Remote Control - Buttons and Display

E-6

Operating mode

( AUTO, COOL, DRY,

FAN, HEAT)

Remote control

transmission indicator

Off Timer setting

Energy saving

Anions button

Sleep button

Energy saving button

Swing button

Timer Set/Cancel button

Temperature adjustment

buttons

Temperature setting

Air flow direction

Turbo mode

Sleep mode

On/Off button

Mode selection button

(AUTO, COOL, DRY, FAN, HEAT)

Fan speed adjustment

button

Turbo button

On Timer button

Off Timer button

Fan speed

Anions indicator

On Timer setting

Battery discharge indicator

Digital On/Off button

etting Started

You have just purchased a split type air conditioner and it has been

installed by your installation specialist.

Your Owner’s Instructions contains valuable information on using your

air conditioner. Please take the time to read it as it will help you take full

advantage of the unit’s features.

The booklet is organized as follows.

◆ The following figures are shown on pages from 4 to 6 :

- Indoor and outdoor units

- Remote control(buttons and display)

They will help you find the buttons and understand the symbols displayed.

◆ In the manual, you will find a series of step-by-step procedures for each

function available.

The illustrations in the step-by-step procedures use three different symbols:

PRESS PUSH HOLD DOWN

E-7

ENGLISH

Inserting the Remote Control Batteries

Push the battery cover on the rear of the remote control with your thumb

in the direction of the arrow and remove it.

Insert the two batteries, taking care to respect the polarities :

◆ + on the battery with + on the remote control.

◆ - on the battery with - on the remote control.

Close the cover by sliding it back until it clicks into place.

◆ Use two AAA, LR03 1.5V batteries.

◆ Do not use old batteries or different kinds of batteries together.

◆ Batteries may be completely discharged after 12 months, even

◆ if they have not actually been used.

You must insert or replace the remote control batteries when :

◆ You purchase the air conditioner

◆ The remote control does not work correctly

E-8

Selecting the Automatic Operating Mode

E-9

ENGLISH

You can start the air conditioner in Automatic mode from your remote

control. In the Automatic mode, the optimum temperature and the fan

speed is selected automatically.

If the is not displayed at the top of the remote control,

press the button on the remote control one or more times until it

appears.

Result

: ◆ The indoor unit beeps each time you press the button.

◆ The air conditioner runs in AUTO mode.

You can change modes at any time.

If necessary, press the (On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected

when the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

Cooling Your Room

If necessary, press the (On/Off) button.

Result:

◆

The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected

when the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

If the is not displayed at the top of the remote control,

press the button on the remote control one or more times until it

appears.

Result:

◆

The indoor unit beeps each time you press the button.

◆

The air conditioner runs in COOL mode.

You can change modes at any time.

To adjust the temperature, press the button one or more times until

the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result: ◆

Each time you press the button:

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆ The air conditioner starts cooling, provided that the room

temperature is higher than the selected temperature.

◆ If the room temperature reaches the set temperature, the air

conditioner stops cooling, but the fan is still operating.

Select the fan speed by pressing the button one or more times

until the required setting is displayed:

Automatic (rotated : )

Low

Medium

High

Result

: Each time you press the button, the indoor unit

beeps.

To control the direction of the air flow, refer to page 17.

You must select the Cool mode if you wish to adjust the:

◆ Cooling temperature

◆ Fan speed when cooling

E-10

Heating Your Room

E-11

ENGLISH

You must select the Heat mode if you wish to adjust the:

◆ Heating temperature

◆ Fan speed when heating

1 If necessary, press the (On/Off) button.

Result

: ◆

The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when

the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism

to prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

It will start up normally after three minutes.

2 If the is not displayed at the top of the remote control, press the

button on the remote control one or more times until it appears.

Result

: ◆

The indoor unit beeps each time you press the button.

◆

The air conditioner runs in HEAT mode.

ee You can change modes at any time.

3 To adjust the temperature, press the button one or more times

until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result

: ◆ Each time you press the button:

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆ The air conditioner starts heating, provided that the room

temperature is lower than the desired temperature

(selected temperature+3°C).

◆ If the room temperature reaches the set temperature, the air

conditioner stops heating, but the fan is still operating.

4 Select the fan speed by pressing the button one or more times

until the required setting is displayed:

Automatic (rotated : )

Low

Medium

High

Result

: ◆

Each time you press the button, the indoor unit beeps.

◆

For the first three to five minutes, the fan operates very

slowly until the air has been sufficiently warmed. Once the

correct temperature has been reached, the fan is automatically

set to the required speed.

5 To control the direction of the air flow, refer to page 17.

IMPORTANT

Changing the Room Temperature Quickly

The Turbo cooling/heating function is used to cool or heat your room as

quickly as possible.

: You have just come home and find that the room is very

hot. You wish to cool it down as quickly as possible.

The Turbo function operates for 30 minutes with the maximum settings before

returning automatically to the mode and temperature previously selected.

If necessary, press the (On/Off) button.

Result

: ◆ The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when the unit

was last used.

◆ The indoor unit beeps.

Press the button.

Result

: ◆ The temperature and fan settings are adjusted automatically.

◆ The air conditioner cools or heats the room as quickly as possible.

◆ After 30 minutes, the air conditioner is reset automatically to the

previous mode, temperature and fan settings.

But, if you press the button in DRY or FAN mode,

it will change to AUTO mode automatically.

If you wish to stop the Turbo function before the end of the 30-minute period,

press the button again.

Result

: The air conditioner is reset automatically to the previous mode,

temperature and fan settings.

To control the direction of the air flow, refer to page

17.

E-12

Removing Excess Humidity

E-13

ENGLISH

If the atmosphere in your room is very humid or damp, you can

remove excess humidity without lowering the room temperature too

much.

1 If necessary, press the (On/Off) button.

Result

: ◆

The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when

the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism

to prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

It will start up normally after three minutes.

2 If the is not displayed at the top of the remote control, press the

button on the remote control one or more times until it appears.

Result

: ◆

The indoor unit beeps each time you press the button.

◆

The air conditioner runs in DRY mode.

ee You can change modes at any time.

3 To adjust the temperature, press the button one or more times

until the required temperature is displayed.

Possible temperatures are between 18°C and 30°C inclusive.

Result

: ◆ Each time you press the button:

- The temperature is adjusted by 1°C

- The indoor unit beeps

◆ The air conditioner starts removing the excess humidity;

the quantity of air is adjusted automatically.

4 To control the direction of the air flow, refer to page 17.

IMPORTANT

Airing Your Room

If the atmosphere in your room is stale, you can air the room using

the Fan feature.

1 If necessary, press the (On/Off) button.

Result

: ◆

The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected when

the unit was last used.

◆ The indoor unit beeps.

2 If the is not displayed at the top of the remote control,

press the button on the remote control one or more times until it

appears.

Result

: ◆

The indoor unit beeps each time you press the button.

◆

The air conditioner runs in FAN mode.

◆

The temperature is set automatically.

ee You can change modes at any time.

3 Select the fan speed by pressing the button one or more times

until the required setting is displayed:

Low

Medium

High

Result

: Each time you press the button, the indoor unit beeps.

4 To control the direction of the air flow, refer to page 17.

E-14

Selecting Energy Saving Mode

If you wish to save energy when using your air conditioner, select the

Energy saving mode with the Energy saving button.

3 Press the button.

Result

: ◆

The indoor unit beeps.

◆

The air conditioner runs in the Energy saving mode.

◆

The outer air flow blade moves up and down.

◆

To stop the Energy saving mode, press the button again.

4 To adjust the temperature, press the button one or more times

until the required temperature is displayed. Possible temperatures are

between 26°C and 30°C inclusive.

ee If you want to adjust temperature under 26°C, cancel the

Energy saving mode before adjusting the temperature.

6 To control the direction of the air flow, refer to page 17.

5 To select the fan speed, press the button one or more times

until the required setting is displayed.

E-15

ENGLISH

If necessary, press the (On/Off) button.

Result: ◆ The operation indicator on the indoor unit lights up.

◆ The air conditioner starts up in the mode selected

when the unit was last used.

◆ The indoor unit beeps.

The air conditioner is fitted with a protection mechanism to

prevent the unit from being damaged when it is started

immediately after being:

◆ Plugged in

◆ Stopped

lt will start up normally after three minutes.

IMPORTANT

2 Select COOL mode by pressing the button.

ee You can select the Energy saving mode only in COOL mode.

Generating Anions

The air conditioner can generate anions with an ionizer in the indoor

unit. Since it is an additional function, you can select it any mode,

even when the air conditioner is turned off.

1 Press the button.

Result

: ◆

The air conditioner generates anions.

◆

The indoor unit beeps.

2 If you wish to stop the Anions function, press the button again.

Result

: The air conditioner is reset automatically to the previous mode,

temperature and fan settings.

To control the direction of the air flow, refer to page 17.

ee If you press the button during off, the air conditioner

will turn on automatically and generate anions in the Fan

mode with Low fan speed.

E-16

Adjusting the Air Flow Direction Vertically

Adjusting the Air Flow Direction Horizontally

There are two sets of inner air flow blades. Just as the outer air flow

blade can be adjusted vertically, the inner blades can be adjusted

horizontally.

1 Adjust each set of inner blades to the required position, by pushing or

pulling them sideways.

E-17

ENGLISH

Depending on the position of the indoor unit on the wall of your room,

you can adjust the position of the outer air flow blade on the bottom

of the unit, thus increasing the efficiency of the air conditioner.

1 Press the button one or more times as required.

Result

: The outer blade is adjusted vertically.

RECOMMENDATION When... Adjust the blade to face...

Cooling Upwards.

Heating Downwards.

2 If you want the blade to move up and down automatically when the air

conditioner is operating, press the button.

Result

: The blade move up and down, around the base position set.

To stop the blade moving up and down, press the button again.

ee If you switch the air conditioner... Then the blade is...

Off Closed completely.

On again Set to the initial position powered.

Setting the On Timer

◆ If you press the button when the Off Timer is set,

the Off Timer is also cancelled.

The On Timer enables you to switch on the air conditioner automatically

after a given period of time. You can set the period of time from

30 minutes to 24 hours.

To set the operating time, press the button one or more times until

the required time is displayed. Possible time is between 0.5 hour and 24

hour inclusive.

Press the (Set/Cancel) button to complete the setting.

Result:

◆ The remaining time is displayed.

◆ Blinking of the timer indicator stops.

◆ The selected mode and the temperature on the display

disappear after 10 seconds.

◆ The air conditioner will switch on automatically when the

counter displayed on the remote control reaches the set time

and disappears the On timer setting.

Press the (Set/Cancel) button.

To Cancel the On Timer

E-18

To select an operating mode in advance, press the button until the

desired mode is displayed at the top of the remote control.

Result:

◆ The air conditioner will run in the selected mode when it is

turned on.

Setting the Off Timer

The Off Timer enables you to switch off the air conditioner automatically

after a given period of time. You can set the period of time from

30 minutes to 24 hours.

To set the operating time, press the button one or more times until

the required time is displayed. Possible time is between 0.5 hour and 24

hour inclusive.

You can see or change the setting mode and/or the temperature

by pressing the button or the button after setting the

Off timer.

Press the (Set/Cancel) button to complete the setting.

Result:

◆ The remaining time is displayed.

◆ Blinking of the timer indicator stops.

◆ The air conditioner will switch off automatically when the

counter displayed on the remote control reaches the set time

and disappears the Off timer setting.

If you would like to turn the air conditioner on after 2 hours

and to operate it for 2 hours:

1. Press the button until ‘2.0 Hr’ is displayed.

2. Press the (Set/Cancel) button.

3. Press the button until ‘4.0 Hr’ is displayed.

4. Press the (Set/Cancel) button.

◆ If you press the button when the On Timer is set,

the On Timer is also cancelled.

Press the (Set/Cancel) button.

To Cancel the Off Timer

E-19

ENGLISH

Setting the Sleep Timer

The Sleep Timer can be used when you are cooling or heating your

room to switch the air conditioner off automatically after a period of

six hours.

ee If you wish to switch the unit off at a specific time, refer to

page 19.

1 Make sure that you have selected either COOL or HEAT mode.

2 Press the button.

Result

: ◆ The indoor unit beeps.

◆ The air conditioner will be controlled as indicated in the

illustrations below.

Cooling The desired temperature is

increased by 1°C every hour.

When it has been increased

by 2°C (after two hours), the

temperature is maintained for

four hours.

Heating The desired temperature is

decreased by 1°C every hour.

When it has been decreased

by 2°C (after two hours), the

temperature is maintained for

four hours.

To Cancel the Sleep Timer

If you no longer wish to use the Sleep Timer that you have set, you

can cancel it at any time.

Press the button.

Result

: ◆ The indoor unit beeps.

◆ The is no longer displayed.

◆ The air conditioner operates normally.

E-20

La pagina sta caricando ...

Samsung SH18ZP0D Manuale utente

Marca: Samsung

Modello: SH18ZP0D

Categoria: Condizionatori d'aria a sistema split

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Samsung SH18ZP0D User manual

Samsung SH18ZP0D Manuale utente

Questo manuale è adatto anche per

Samsung SH18ZP0D Manuale utente

in altre lingue

Documenti correlati