Yamaha RX-V459 Manuale del proprietario

YAMAHA ELECTRONICS CORPORATION, USA

6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.

YAMAHA CANADA MUSIC LTD.

135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA

YAMAHA ELECTRONIK EUROPA G.m.b.H.

SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY

YAMAHA ELECTRONIQUE FRANCE S.A.

RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE

YAMAHA ELECTRONICS (UK) LTD.

YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND

YAMAHA SCANDINAVIA A.B.

J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN

YAMAHA MUSIC AUSTRALIA PTY, LTD.

17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA

©

RX-V459

Printed in Malaysia WG73610

RX-V459

AV Receiver

Ampli-tuner audio-vidéo

OWNER’S MANUAL

MODE D’EMPLOI

BEDIENUNGSANLEITUNG

BRUKSANVISNING

GEBRUIKSAANWIJZING

ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ

G

RX-V459_G_cv.fm Page 1 Tuesday, January 24, 2006 2:53 PM

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean

place – away from direct sunlight, heat sources, vibration,

dust, moisture, and/or cold. Allow ventilation space of at

least 30 cm on the top, 20 cm on the left and right, and 20

cm on the back of this unit.

3 Locate this unit away from other electrical appliances,

motors, or transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from

cold to hot, and do not locate this unit in a environment with

high humidity (i.e. a room with a humidifier) to prevent

condensation inside this unit, which may cause an electrical

shock, fire, damage to this unit, and/or personal injury.

5 Avoid installing this unit where foreign object may fall onto

this unit and/or this unit may be exposed to liquid dripping

or splashing. On the top of this unit, do not place:

– other components, as they may cause damage and/or

discoloration on the surface of this unit.

– burning objects (i.e. candles), as they may cause fire,

damage to this unit, and/or personal injury.

– containers with liquid in them, as they may fall and

liquid may cause electrical shock to the user and/or

damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain,

etc. in order not to obstruct heat radiation. If the temperature

inside this unit rises, it may cause fire, damage to this unit,

and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections

are complete.

8 Do not operate this unit upside-down. It may overheat,

possibly causing damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet,

grasp the plug; do not pull the cord.

11 Do not clean this unit with chemical solvents; this might

damage the finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this

unit with a higher voltage than specified is dangerous and

may cause fire, damage to this unit, and/or personal injury.

YAMAHA will not be held responsible for any damage

resulting from use of this unit with a voltage other than

specified.

13 To prevent damage by lightning, keep the power cable and

outdoor antennas disconnected from a wall outlet or this unit

during a lightning storm.

14 Do not attempt to modify or fix this unit. Contact qualified

YAMAHA service personnel when any service is needed.

The cabinet should never be opened for any reasons.

15 When not planning to use this unit for long periods of time

(i.e. vacation), disconnect the AC power plug from the wall

outlet.

16 Install this unit near the AC wall outlet where the power

cable plug can be reached easily.

17 Be sure to read the “TROUBLESHOOTING” section on

common operating errors before concluding that this unit is

faulty.

18 Before moving this unit, press STANDBY/ON to set this

unit in the standby mode, and then disconnect the power

cable from the AC wall outlet.

19 VOLTAGE SELECTOR (Asia and General models only)

The VOLTAGE SELECTOR on the rear panel of this unit

must be set for your local main voltage BEFORE plugging

into the AC wall outlet. Voltages are:

Asia model ............................ 220/230–240 V AC, 50/60 Hz

General model ........ 110/120/220/230–240 V AC, 50/60 Hz

■ For U.K. customers

If the socket outlets in the home are not suitable for the

plug supplied with this appliance, it should be cut off and

an appropriate 3 pin plug fitted. For details, refer to the

instructions described below.

The plug severed from the mains lead must be destroyed, as a

plug with bared flexible cord is hazardous if engaged in a live

socket outlet.

■ Special Instructions for U.K. Model

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE.

This unit is not disconnected from the AC power

source as long as it is connected to the wall outlet, even

if this unit itself is turned off. In this state, this unit is

designed to consume a very small quantity of power.

Note

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:

Blue: NEUTRAL

Brown: LIVE

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

The wire which is coloured BLUE must be connected

to the terminal which is marked with the letter N or

coloured BLACK. The wire which is coloured

BROWN must be connected to the terminal which is

marked with the letter L or coloured RED.

Making sure that neither core is connected to the earth

terminal of the three pin plug.

1

PREPARATIONINTRODUCTION

BASIC

OPERATION

SOUND FIELD

PROGRAMS

ADVANCED

OPERATION

ADDITIONAL

INFORMATION

English

FEATURES............................................................. 2

GETTING STARTED............................................ 3

Supplied accessories .................................................. 3

Installing batteries in the remote control ................... 3

CONTROLS AND FUNCTIONS ......................... 4

Front panel ................................................................. 4

Remote control........................................................... 6

Front panel display .................................................... 8

Rear panel ................................................................ 10

CONNECTIONS .................................................. 11

Placing speakers....................................................... 11

Connecting speakers ................................................ 12

Information on jacks and cable plugs ...................... 15

Audio and video signal flow.................................... 16

Connecting a TV...................................................... 17

Connecting a DVD player,

a DVD recorder, a VCR or an STB..................... 18

Connecting a CD player,

an MD player or a tape deck................................ 20

Connecting a multi-format player

or an external decoder ......................................... 21

Connecting a game console,

a video camera or a portable audio player........... 21

Connecting the FM and AM antennas ..................... 22

Connecting the power cable..................................... 23

Setting the speaker impedance................................. 24

Turning on this unit

and setting it to the standby mode....................... 25

BASIC SETUP...................................................... 26

PLAYBACK.......................................................... 29

USING OTHER FEATURES.............................. 31

Using SILENT CINEMA ........................................ 31

Muting the audio output........................................... 31

Selecting the night listening mode........................... 31

Selecting the input mode ......................................... 32

Using the sleep timer ............................................... 33

Adjusting the speaker level...................................... 34

Selecting the Compressed Music

Enhancer mode .................................................... 35

Selecting the MULTI CH INPUT component......... 36

Enjoying multi-channel sources

in 2-channel stereo............................................... 36

Enjoying unprocessed input sources........................ 36

Enjoying pure hi-fi stereo sound.............................. 37

Displaying the input source information ................. 37

Playing video sources in the background ................ 38

ENJOYING SURROUND SOUND.....................39

Enjoying multi-channel sources in surround ........... 39

Enjoying 2-channel sources in surround.................. 40

Using Virtual CINEMA DSP .................................. 41

RECORDING........................................................42

FM/AM TUNING..................................................43

Automatic tuning ..................................................... 43

Manual tuning.......................................................... 44

Automatic preset tuning........................................... 45

Manual preset tuning ............................................... 46

Selecting preset stations........................................... 47

Exchanging preset stations ...................................... 48

RADIO DATA SYSTEM TUNING

(U.K. AND EUROPE MODELS ONLY)........50

Selecting the Radio Data System program .............. 50

Using the Radio Data System station network ........ 51

Displaying the Radio Data System information ...... 52

SOUND FIELD PROGRAMS .............................54

Selecting sound field programs ............................... 54

Sound field program descriptions............................ 55

Changing sound field parameter settings................. 57

Sound field program speaker layouts ...................... 63

SET MENU ............................................................66

Using SET MENU................................................... 68

1 SOUND MENU.................................................... 70

2 INPUT MENU...................................................... 73

3 OPTION MENU................................................... 75

ADVANCED SETUP............................................76

REMOTE CONTROL FEATURES ...................78

Controlling this unit, a TV,

or other components ............................................ 78

Setting remote control codes ................................... 80

RESETTING THE SYSTEM...............................81

TROUBLESHOOTING .......................................82

GLOSSARY...........................................................86

Audio information ................................................... 86

Video information.................................................... 87

Sound field program information ............................ 88

SPECIFICATIONS...............................................89

CONTENTS

INTRODUCTION

PREPARATION

BASIC OPERATION

SOUND FIELD PROGRAMS

ADVANCED OPERATION

ADDITIONAL INFORMATION

FEATURES

2

Built-in 6-channel power amplifier

◆ Minimum RMS output power

(0.06% THD, 20 Hz to 20 kHz, 8 Ω)

Front: 90 W + 90 W

Center: 90 W

Surround: 90 W + 90 W

Surround back: 90 W

Sound field features

◆ Proprietary YAMAHA technology for the creation of

sound fields

◆ Dolby Digital/Dolby Digital EX decoder

◆ DTS/DTS-ES Matrix 6.1, Discrete 6.1, DTS Neo:6,

DTS 96/24 decoder

◆ Dolby Pro Logic/Dolby Pro Logic II/

Dolby Pro Logic IIx decoder

◆ Virtual CINEMA DSP

◆ SILENT CINEMA

™

Sophisticated AM/FM tuner

◆ 40-station random and direct preset tuning

◆ Automatic preset tuning

◆ Preset station shifting capability (preset editing)

Radio Data System

(U.K. and Europe models only)

◆ Radio Data System tuning capability

Other features

◆ 192-kHz/24-bit D/A converter

◆ 6 additional input jacks for discrete multi-channel input

◆ S-video signal input/output capability

◆ Component video input/output capability

(3 COMPONENT VIDEO INs and 1 MONITOR

OUT)

◆ Optical and coaxial digital audio signal jacks

◆ Sleep timer

◆ Cinema and music night listening modes

◆ Remote control with preset remote control codes

◆ PORTABLE mini analog input jack on the front panel

for a portable audio player

◆ Compressed Music Enhancer mode to improve the

sound quality of compression artifacts (such as the

MP3 format) to that of a high-quality stereo

• y indicates a tip for your operation.

• Some operations can be performed by using either the buttons on the front panel or the ones on the remote control. In case the button

names differ between the front panel and the remote control, the button name on the remote control is given in parentheses.

• This manual is printed prior to production. Design and specifications are subject to change in part as a result of improvements, etc. In

case of differences between the manual and product, the product has priority.

Manufactured under license from Dolby Laboratories.

“Dolby”, “Pro Logic”, and the double-D symbol are trademarks

of Dolby Laboratories.

Manufactured under license from Digital Theater Systems, Inc.

“DTS”, “DTS-ES”, “NEO:6”, and “DTS 96/24” are trademarks

“SILENT CINEMA” is a trademark of YAMAHA

CORPORATION.

FEATURES

Notes

GETTING STARTED

3

INTRODUCTION

English

Check that you received all of the following parts.

1 Press the part and slide the battery

compartment cover off.

2 Insert the two supplied batteries (AA, R6,

UM-3) according to the polarity markings

(+ and –) on the inside of the battery

compartment.

3 Slide the cover back until it snaps into place.

• Change all of the batteries if you notice a decrease in the

operation range of the remote control.

• Do not use an old battery together with a new one.

• Do not use different types of batteries (such as alkaline and

manganese batteries) together. Read the packaging carefully as

these different types of batteries may have the same shape and

color.

• If the batteries have leaked, dispose of them immediately. Avoid

touching the leaked material or letting it come into contact with

clothing, etc. Clean the battery compartment thoroughly before

installing new batteries.

• Do not throw away batteries with general house waste; dispose

of them correctly in accordance with your local regulations.

• If the remote control is without batteries for more than

2 minutes, or if exhausted batteries remain in the remote

control, the contents of the memory may be cleared. When the

memory is cleared, insert new batteries, set up the remote

control code and program any acquired functions that may have

been cleared.

GETTING STARTED

Supplied accessories

Installing batteries in the remote control

Remote control Batteries (2)

(AA, R6, UM-3)

Indoor FM antenna

(U.S.A., Canada, China, Asia and General

models)

AM loop antenna

75-ohm/300-ohm

antenna adapter

(U.K. model only)

Indoor FM antenna

(U.K., Europe, Australia and Korea models)

CD

MD/CD-R

TUNER

START

SRCH MODE

SET MENU

CODE SET

BAND

LEVEL

A/B/C/D/E A/B/C/D/E

MODE PTY SEEK

DAB MEMORY

PRESET/CH

STRAIGHT

MOVIEENTERTAINMUSIC

V-AU XDVD

AMP

POWER

POWER POWER

REC

DISC SKIP

FREQ/TEXT EON

DIRECT ST.EXTD SUR.STANDARD

SELECT

NIGHT

ENHANCER

SPEAKERS

TV MUTE TV INPUT

VCR

DTV/CBL

SLEEP

MULTI CH IN

STANDBY

MUTE

MENUTITLE

VOLUME

STEREO

4321

8

10

7

09

65

ENT.

DISPLAYRETURN

TV VOL TV CH

AVTV

ENTER

CD

MD/CD-R

TUNER

START

SRCH MODE

SET MENU

CODE SET

BAND

LEVEL

A/B/C/D/E A/B/C/D/E

MODE PTY SEEK

DAB MEMORY

PRESET/CH

STRAIGHT

MOVIEENTERTAINMUSIC

V-AU XDVD

AMP

POWER

POWER POWER

REC

DISC SKIP

FREQ/TEXT EON

DIRECT ST.EXTD SUR.STANDARD

SELECT

NIGHT

ENHANCER

SPEAKERS

TV MUTE TV INPUT

VCR

DTV/CBL

SLEEP

MULTI CH IN

STANDBY

MUTE

MENUTITLE

VOLUME

STEREO

4321

8

10

7

09

65

ENT.

DISPLAYRETURN

TV VOL TV CH

AVTV

ENTER

1

3

2

Notes

CONTROLS AND FUNCTIONS

4

1 STANDBY/ON

Turns on this unit or set it to the standby mode

(see page 25).

• In the standby mode, this unit consumes a small amount of

power in order to receive infrared signals from the remote

control.

• When you turn on this unit, there will be a 4 to 5-second delay

before this unit can reproduce sound.

2 Remote control sensor

Receives signals from the remote control (see page 7).

3 PRESET/TUNING, EDIT

• Switches the function of PRESET/TUNING

l

/

h

between selecting preset station numbers and selecting the

tuning frequency.

• Edits the assignments of preset stations (see page 48).

4 FM/AM

Switches the reception band between FM and AM when

“TUNER” is selected as the input source (see page 43).

5 A/B/C/D/E, NEXT

• Selects one of the 5 preset station groups (A to E) when

“TUNER” is selected as the input source (see page 43).

• Selects the speaker channel whose output level you

want to adjust when “TUNER” is not selected as the

input source (see page 34).

6 PRESET/TUNING l / h, LEVEL +/– buttons

• Selects one of the 8 preset station numbers (1 to 8)

when “TUNER” is selected as the input source. The

colon (:) is displayed in the front panel display (see

page 47).

• Selects the tuning frequency when “TUNER” is

selected as the input source. The colon (:) is not

displayed in the front panel display (see page 44).

• Adjusts the level of the speaker channel selected using

NEXT when “TUNER” is not selected as the input

source (see page 34).

7 MEMORY (MAN’L/AUTO FM)

Stores a preset station in the memory. Hold down this

button for more than 3 seconds to start automatic preset

tuning (see page 45).

CONTROLS AND FUNCTIONS

Front panel

VIDEO PORTABLEL AUDIO R

VIDEO AUX

STANDBY

/ON

AUTO/MAN'L

TUNING MODE

MAN'L/AUTO FM

MEMORY

LEVEL

l

PRESET/TUNING

h

FM/AM

EDIT

PRESET/TUNING

VOLUME

BASS/TREBLE

TONE CONTROL

l PROGRAM h

EFFECT

STRAIGHT

SILENT CINEMA

PHONES

BA

SPEAKERS

MULTI CH

INPUT

INPUT MODE

INPUT

A

214356897

GHIED

0

J

B

CF

Notes

CONTROLS AND FUNCTIONS

5

INTRODUCTION

English

8 Front panel display

Shows information about the operational status of this unit

(see page 8).

9 TUNING MODE (AUTO/MAN’L)

Switches between automatic tuning (the AUTO indicator

is turned on) and manual tuning (the AUTO indicator is

turned off) (see page 43).

0 VOLUME

Controls the output level of all audio channels.

y

This does not affect the AUDIO OUT (REC) level.

A PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with

headphones (see page 31).

• When you connect headphones, no signals are output at the

SUBWOOFER OUTPUT jack or the speaker terminals.

• All Dolby Digital and DTS audio signals are mixed down to the

left and right headphone channels.

B SPEAKERS A/B buttons

Turns on or off the set of front speakers connected to the A

and/or B terminals on the rear panel each time the

corresponding button is pressed.

C STRAIGHT (EFFECT)

Turns the sound field programs off or on. When

“STRAIGHT” is selected, 2-channel or multi-channel

input signals are output directly from their respective

speakers without effect processing (see page 36).

D TONE CONTROL

Selects “BASS” or “TREBLE” to adjust the total balance

of the front left and right speakers in conjunction with

BASS/TREBLE +/– buttons (see page 30).

E BASS/TREBLE +/– button

Adjusts the bass/treble balance of the front left and right

speakers in conjunction with TONE CONTROL (see

page 30).

F PROGRAM l / h buttons

Selects sound field programs (see page 54).

G INPUT MODE

Selects either digital or analog input signals exclusively or

sets this unit to automatically detect the type of input

signals and select the corresponding input signals when

one component is connected via both digital and analog

connections (see page 32).

H INPUT selector

Selects the desired input source.

I MULTI CH INPUT

Selects the input source connected to the MULTI CH

INPUT jacks (see page 36).

The input source connected to the MULTI CH INPUT jacks takes

priority over the source selected with the INPUT selector on the

front panel (or the input selector buttons on the remote control).

J VIDEO AUX jacks

Input audio and video signals from a portable external

source such as a game console, a video camera or a

portable audio player (see page 21).

y

To reproduce the source signals input at these jacks, select

“V-AUX” as the input source.

The audio signals input at the PORTABLE mini jack take priority

over the ones input at the AUDIO L/R jacks.

Notes

Note

CONTROLS AND FUNCTIONS

6

This section describes the function of each control on the

remote control used to control this unit. To operate other

components, see “REMOTE CONTROL FEATURES” on

page 78.

■ Controlling this unit

Press AMP to control this unit.

1 Infrared signal transmitter

Outputs infrared control signals. Aim the transmitter at the

component you want to operate (see page 7).

2 Input selector buttons

Select the input source.

3 Sound field program selector buttons

Select sound field programs (see page 54).

– Use SELECT to play back 2-channel sources in

surround (see page 40).

– Use EXTD SUR. to switch between 5.1 and 6.1-

channel playback of multi-channel sources (see

page 39).

– Use DIRECT ST. to play back 2-channel sources in

hi-fi stereo sound (see page 37).

4 SPEAKERS

Turns on or off the set of front speakers connected to the

FRONT A and/or B terminals on the rear panel. Press this

button repeatedly to toggle as follows:

5 ENHANCER

Turns on or off the Compressed Music Enhancer mode

(see page 35).

6 LEVEL

Selects the speaker channel to be adjusted (see page 34).

7 Cursor buttons u / d / j / i, ENTER

Select and adjust the sound field program parameters or

the “SET MENU” parameters.

8 RETURN

Returns to the previous menu level when adjusting the

“SET MENU” parameters.

9 STANDBY

Sets this unit to the standby mode (see page 25).

0 POWER

Turns on this unit (see page 25).

Remote control

CD

MD/CD-R

TUNER

START

SRCH MODE

SET MENU

CODE SET

BAND

LEVEL

A/B/C/D/E A/B/C/D/E

MODE PTY SEEK

DAB MEMORY

PRESET/CH

STRAIGHT

MOVIEENTERTAINMUSIC

V-AUXDVD

AMP

POWER

POWER POWER

REC

DISC SKIP

FREQ/TEXT EON

DIRECT ST.EXTD SUR.STANDARD

SELECT

NIGHT

ENHANCER

SPEAKERS

TV MUTE TV INPUT

DVR

DTV/CBL

SLEEP

MULTI CH IN

STANDBY

MUTE

MENUTITLE

VOLUME

STEREO

4321

8

10

7

09

65

ENT.

DISPLAYRETURN

TV VOL TV CH

AVTV

ENTER

9

0

B

A

C

D

E

F

G

I

1

2

3

5

4

7

6

8

H

J

A on B on

A and B off

CONTROLS AND FUNCTIONS

7

INTRODUCTION

English

A MULTI CH IN

Selects the component connected to the MULTI CH

INPUT jacks as the input source when using an external

decoder, etc. (see page 36).

B CODE SET

Use to set up remote control codes (see page 80).

C SLEEP

Sets the sleep timer (see page 33).

D AMP

Sets the remote control to the operation mode of this unit.

E VOLUME +/–

Controls the output level of all audio channels.

This does not affect the AUDIO OUT (REC) level.

F MUTE

Mutes the audio output. Press again to restore the audio

output to the previous volume level (see page 31).

G STRAIGHT

Turns the sound field programs off or on. When

“STRAIGHT” is selected, 2-channel or multi-channel

input signals are output directly from their respective

speakers without effect processing (see page 36).

H NIGHT

Turns on or off the night listening modes (see page 31).

I SET MENU

Enters “SET MENU” (see page 68).

■ Controlling the TUNER functions

Press TUNER to control the TUNER functions.

3 Numeric buttons

Use numbers 1 through 8 to select preset stations.

6 BAND

Switches the reception band between FM and AM

(see page 43).

7 A/B/C/D/E j / i, PRESET/CH u / d

Press PRESET/CH u / d to select a preset station group

(A to E) and A/B/C/D/E j / i to select a preset station

number (1 to 8) (see page 47).

J Radio Data System tuning buttons

(U.K. and Europe models only)

FREQ/TEXT

Switches the Radio Data System display between the

PS mode, PTY mode, RT mode, CT mode (if the

station offers the corresponding data services) and the

frequency display (see page 52).

PTY SEEK MODE

Sets this unit to the PTY SEEK mode (see page 50).

PTY SEEK START

Starts searching for a station once the desired program

type is selected in the PTY SEEK mode (see page 51).

EON

Selects a program type (NEWS, AFFAIRS, INFO, or

SPORT) for automatic tuning (see page 52).

■ Using the remote control

The remote control transmits a directional infrared ray.

Be sure to aim the remote control directly at the remote

control sensor on the main unit during operation.

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following types

of conditions:

– places of high humidity, such as near a bath

– places of high temperatures, such as near a heater or stove

– places of extremely low temperatures

– dusty places

Note

Notes

VOLUME

AUTO/MAN'LMAN'L/AUTO FMLEVELNEXT

EDIT

EFFECT

MEMORY

FM/AM

PRESET/TUNING

A/B/C/D/E

l PROGRAM h

BASS/TREBLE

l

PRESET/TUNING/CH

h

TUNING MODE

INPUT MODE

TONE CONTROL

STRAIGHT

SPEAKERS

PHONES

SILENT CINEMA

STANDBY

/ON

BA

MULTI CH

INPUT

VIDEO PORTABLEL AUDIO R

VIDEO AUX

30 30

Approximately 6 m (20 ft)

CONTROLS AND FUNCTIONS

8

1 Decoder indicators

The respective indicator lights up when any of the

decoders of this unit function.

2 ENHANCER indicator

Lights up when the Compressed Music Enhancer mode is

turned on (see page 35).

3 Sound field indicators

Light up to indicate the active DSP sound fields.

4 VIRTUAL indicator

Lights up when Virtual CINEMA DSP is active (see

page 41).

5 Input source indicators

The corresponding cursor lights up to show the currently

selected input source.

6 SILENT CINEMA indicator

Lights up when headphones are connected and a sound

field program is selected (see page 31).

7 CINEMA DSP indicator

Lights up when you select a CINEMA DSP sound field

program (see page 55).

8 AUTO indicator

Lights up when this unit is in the automatic tuning mode

(see page 43).

9 TUNED indicator

Lights up when this unit is tuned into a station

(see page 43).

0 STEREO indicator

Lights up when this unit is receiving a strong signal for an

FM stereo broadcast while the AUTO indicator is lit

(see page 43).

A MEMORY indicator

Flashes to show that a station can be stored (see page 45).

B VOLUME level indicator

Indicates the current volume level.

C PCM indicator

Lights up when this unit is reproducing PCM (Pulse Code

Modulation) digital audio signals.

D STANDARD indicator

Lights up when the “SUR. STANDARD” or

“SUR. ENHANCED” programs are selected (see

page 40).

E SP A B indicators

Light up according to the set of front speakers selected.

Front panel display

96

24

q PL

q EX

q PL

ENHANCER

MATRIX DISCRETE

SILENT CINEMA

NIGHTSTANDARD

AUTO

PSHOLD RT

EON

PTYPTY

TUNED

MUTE

VOLUME

MEMORY

SLEEP

VIRTUAL

PCM

q PL x

A B

SP

mS

ft

dB

96/24

HiFi DSP

LFE

LCR

SL SB SR

q

DIGITAL

t

dB

STEREO

CT

2

DGFHI JLKNM

O

C

E

134567 A

908B

(U.K. and Europe models only)

Presence DSP sound field

Listening position

Surround left

DSP sound field

Surround right

DSP sound field

Surround back DSP sound field

CONTROLS AND FUNCTIONS

9

INTRODUCTION

English

F Headphones indicator

Lights up when headphones are connected (see page 31).

G NIGHT indicator

Lights up when you select a night listening mode

(see page 31).

H HiFi DSP indicator

Lights up when you select a HiFi DSP sound field

program (see page 55).

I Multi-information display

Shows the name of the current sound field program and

other information when adjusting or changing settings.

J SLEEP indicator

Lights up while the sleep timer is on (see page 33).

K MUTE indicator

Flashes while the MUTE function is on (see page 31).

L 96/24 indicator

Lights up when a DTS 96/24 signal is input to this unit.

M Input channel indicators

Indicate the channel components of the current digital

input signal (see page 27).

N LFE indicator

Lights up when the input signal contains the LFE signal.

O Radio Data System indicators

(U.K. and Europe models only)

Lights up when the Radio Data System data is being

received.

EON

Lights up when the EON data service is being

received.

PTY HOLD

Lights up while searching for the Radio Data System

stations in the PTY SEEK mode.

CONTROLS AND FUNCTIONS

10

1 Video component jacks

See pages 17 and 18 for connection information.

2 Audio component jacks

See page 20 for connection information.

3 MULTI CH INPUT jacks

See page 21 for connection information.

4 SUBWOOFER OUTPUT jack

See page 13 for connection information.

5 DIGITAL INPUT jacks

See pages 18 and 19 for connection information.

6 COMPONENT VIDEO jacks

See pages 17 and 18 for connection information.

7 Antenna terminals

See page 22 for connection information.

8 Speaker terminals

See page 12 for connection information.

9 AC OUTLET(S)

Use to supply power to your other audiovisual

components.

See page 23 for details.

■ VOLTAGE SELECTOR

(Asia and General models only)

See page 23 for details.

Rear panel

AUDIO AUDIO

OUTPUT DIGITAL INPUT

DVD DVD

COAXIAL

DTV/CBL

SUB

WOOFER

SUB

WOOFER

SURROUND

FRONT

OUT

(REC)

IN

(PLAY)

MD/

CD-R

CD

DVD

MONITOR OUTDTV/CBL

DVD DVR

COMPONENT VIDEO

P

RPBY

FM ANT

75Ω

UNBAL.

AM

ANT

GND

TUNER SPEAKERS

DTV/CBL

IN OUT

DVR DVD DTV/CBL

IN

OUT

DVR

CENTER

MULTI CH INPUT

VIDEO S VIDEO

MONITOR

OUT

MONITOR

OUT

FRONT

A

B

AC OUTLETS

SURROUND

CENTER SURROUND BACK

PRPBY

OPTICAL

654321

7

89

CONNECTIONS

11

PREPARATION

English

The speaker layout below shows the standard ITU-R

*

speaker setting. You can use it to enjoy CINEMA DSP and

multi-channel audio sources.

*

ITU-R is the radio communication sector of the ITU

(International Telecommunication Union).

Front speakers (FL and FR)

The front speakers are used for the main source sound plus

effect sounds. Place these speakers at an equal distance

from the ideal listening position. The distance of each

speaker from each side of the video monitor should be the

same.

Center speaker (C)

The center speaker is for the center channel sounds

(dialog, vocals, etc.). If for some reason it is not practical

to use a center speaker, you can do without it. Best results,

however, are obtained with the full system. Place the

center speaker centrally between the front speakers and as

close to the monitor as possible, such as directly over or

under it.

Surround speakers (SL and SR)

The surround speakers are used for effect and surround

sounds. Place these speakers behind your listening

position, facing slightly inwards, about 1.8 m (6 ft) above

the floor.

Surround back speaker (SB)

The surround back speaker supplements the surround

speakers and provides more realistic front-to-back

transitions. Place this speaker directly behind the listening

position and at the same height as the surround speakers.

Subwoofer (SW)

The use of a subwoofer with a built-in amplifier, such as

the YAMAHA Active Servo Processing Subwoofer

System, is effective not only for reinforcing bass

frequencies from any or all channels, but also for hi-fi

stereo reproduction of the LFE (low-frequency effect)

channel included in Dolby Digital and DTS sources. The

position of the subwoofer is not so critical, because low

bass sounds are not highly directional. But it is better to

place the subwoofer near the front speakers. Turn it

slightly toward the center of the room to reduce wall

reflections.

CONNECTIONS

Placing speakers

60˚

30˚

SB

FL

FR

C

SL

SR

80˚

SL

SW

FR

FL

SB

SL

SR

C

1.8 m (6 ft)

12

CONNECTIONS

Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty,

no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be

unnatural and lack bass.

• Before connecting the speakers, make sure that this unit is in the standby mode (see page 25).

• Do not let the bare speaker wires touch each other or do not let them touch any metal part of this

unit. This could damage this unit and/or speakers.

• Use magnetically shielded speakers. If this type of speakers still creates the interference with the

monitor, place the speakers away from the monitor.

• If you are to use 4 or 6 ohm speakers, be sure to set “SP IMP.” to “6ΩMIN” before using this unit

(see page 24).

• A speaker cord is actually a pair of insulated cables running side by side. Cables are colored or shaped differently, perhaps with a

stripe, groove or ridge. Connect the striped (grooved, etc.) cable to the “+” (red) terminals of this unit and your speaker. Connect the

plain cable to the “–” (black) terminals.

• The low-frequency signals of other speakers set to “SML” (or “SMALL”) to “NONE” in “SPEAKER SET” (see pages 70 and 71) are

directed to the speakers selected in “BASS OUT” (see page 71).

Connecting speakers

Notes

CAUTION

OUTPUT

SUB

WOOFER

SPEAKERS

FRONT

A

B

SURROUND

CENTERCLASS 2 WIRING SURROUND BACK

7

6

54

3

21

Subwoofer

Center

speaker

Front speakers

(

A

)

Surround back

speaker

Surround speakers

Front

speakers (B)

Right

LeftRight

Left

13

CONNECTIONS

PREPARATION

English

FRONT terminals

Connect one or two front speaker systems (1, 2) to these

terminals. If you use only one front speaker system,

connect it to the FRONT A or B terminal.

CENTER terminals

Connect a center speaker (3) to these terminals.

SURROUND terminals

Connect surround speakers (4, 5) to these terminals.

SURROUND BACK terminals

Connect a surround back speaker (6) to these terminals.

SUBWOOFER jack

Connect a subwoofer with a built-in amplifier (7) (such as

the YAMAHA Active Servo Processing Subwoofer

System) to this jack.

7

1

2

6

5

4

3

Speaker layout

14

CONNECTIONS

■ Connecting the speaker cable

1 Remove approximately 10 mm (0.4 in) of

insulation from the end of each speaker

cable and then twist the exposed wires of the

cable together to prevent short circuits.

2 Loosen the knob.

3 Insert one bare wire into the hole on the side

of each terminal.

4 Tighten the knob to secure the wire.

■ Connecting the banana plug

(except U.K., Europe and Asia models)

The banana plug is a single-pole electrical connector

widely used to terminate speaker cables.

1 Tighten the knob.

2 Insert the banana plug connector into the

end of the corresponding terminal.

10 mm (0.4 in)

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Red: positive (+)

Black: negative (–)

Banana plug

15

CONNECTIONS

PREPARATION

English

■ Audio jacks

This unit has four types of audio jacks. Connection

depends on the availability of audio jacks on your other

components.

AUDIO jacks

For conventional analog audio signals transmitted via left

and right analog audio cables. Connect red plugs to the

right jacks and white plugs to the left jacks.

PORTABLE jack

For analog audio signals transmitted via stereo analog

audio mini cables.

DIGITAL AUDIO COAXIAL jacks

For digital audio signals transmitted via coaxial digital

audio cables.

DIGITAL AUDIO OPTICAL jacks

For digital audio signals transmitted via optical digital

audio cables.

• You can use the digital jacks to input PCM, Dolby Digital and

DTS bitstreams. When you connect components to both the

COAXIAL and OPTICAL jacks, priority is given to the signals

input at the COAXIAL jack. All digital input jacks are

compatible with 96-kHz sampling digital signals.

• Pull out the cap from the optical jack before you connect the

fiber optic cable. Do not discard the cap. When you are not

using the optical jack, be sure to put the cap back in place. This

cap protects the jack from dust.

■ Video jacks

This unit has three types of video jacks. Connection

depends on the availability of input jacks on your video

monitor.

VIDEO jacks

For conventional composite video signals transmitted via

composite video cables.

S VIDEO jacks

For S-video signals, separated into the luminance (Y) and

chrominance (C) video signals transmitted on separate

wires of S-video cables.

COMPONENT VIDEO jacks

For component video signals, separated into the

luminance (Y) and chrominance (P

B, PR) video signals

transmitted on separate wires of component video cables.

Information on jacks and cable plugs

COAXIAL

DIGITAL AUDIO

AUDIO

PORTABLE

OPTICAL

DIGITAL AUDIO

R

L

C

O

M

R

L

VIDEO S VIDEO

COMPONENT VIDEO

Y PB PR

PB

Y

P

R

S

V

Audio jacks and cables Video jacks and cables

Component

video cable

plug

(Red)(White) (Orange)

(Blue)(Green)(Yellow)

Stereo

analog

audio

mini cable

plug

(Red)(Green)

Optical

digital

audio cable

plug

Left and right

analog audio

cable plug

Coaxial

digital audio

cable plug

S-video

cable plug

Composite

video cable

plug

(Green)

Notes

16

CONNECTIONS

■ Audio signal flow for AUDIO OUT (REC)

This unit handles digital and analog signals independently. Thus, audio signals input at the analog jacks are output only at the analog

AUDIO OUT (REC) jacks.

■ Video signal flow for MONITOR OUT

Audio and video signal flow

Note

L RRL

PORTABLE

AUDIO

Output

AUDIO OUT (REC)

Input

Analog output

Analog audio

S VIDEO

VIDEO

COMPONENT

VIDEO

Y P

B

P

R

Y P

B

P

R

Through

Output

(MONITOR OUT)

Input

Analog video

17

CONNECTIONS

PREPARATION

English

Connect your TV to the VIDEO MONITOR OUT jack, the S VIDEO MONITOR OUT jack or the COMPONENT

VIDEO MONITOR OUT jacks of this unit.

Do not connect this unit or other components to the AC power supply until all connections between

components are complete.

Connecting a TV

CAUTION

MONITOR OUT

COMPONENT VIDEO

VIDEO S VIDEO

MONITOR

OUT

MONITOR

OUT

PRPBY

V

S

PRPBY

TV

S-video in

Video in

Component video in

18

CONNECTIONS

Connect your DVD player, DVD recorder, VCR or STB (set-top box) using the same type of video connections as those

made for your TV (see page 17). The cable TV receiver and the satellite receiver are examples of the STB.

Do not connect this unit or other components to the AC power supply until all connections between

components are complete.

• Be sure to make the same type of video connections as those made for your TV (see page 17). For example, if you connected your TV

to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.

• To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT jack, select the

corresponding setting for “OPTICAL IN” or “COAXIAL IN” in “INPUT ASSIGN” (see page 73).

• If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is

given to the signals input at the DIGITAL INPUT (COAXIAL) jack.

■ Connecting a DVD player

Connecting a DVD player, a DVD recorder, a VCR or an STB

CAUTION

Notes

AUDIO

DIGITAL INPUT

DVD DVD

COAXIAL

DVD

COMPONENT VIDEO

P

RPBY

DVD

VIDEO S VIDEO

OPTICAL

V

Y PB

PR

LR

S

O

C

DVD Player

Component video out

S-Video out

Optical audio out

Video out

Coaxial audio out

Audio out

S-Video out

La pagina sta caricando ...

Yamaha RX-V459 Manuale del proprietario

Yamaha RX-V459 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti