Gigabyte Z490 AORUS MASTER Manuale del proprietario

Z490 AORUS MASTER

User's Manual

Rev. 1001

12ME-Z49MSTR-1001R

For more product details, please visit GIGABYTE's website.

To reduce the impacts on global warming, the packaging materials of this product are

recyclable and reusable. GIGABYTE works with you to protect the environment.

Copyright

The trademarks mentioned in this manual are legally registered to their respective owners.

Disclaimer

Information in this manual is protected by copyright laws and is the property of GIGABYTE.

Changes to the specications and features in this manual may be made by GIGABYTE

without prior notice.

No part of this manual may be reproduced, copied, translated, transmitted, or published in

any form or by any means without GIGABYTE's prior written permission.

Documentation Classications

In order to assist in the use of this product, GIGABYTE provides the following types of docu-

mentations:

For quick set-up of the product, read the Quick Installation Guide included with the product.

For detailed product information, carefully read the User's Manual.

For product-related information, check on our website at: https://www.gigabyte.com

Identifying Your Motherboard Revision

The revision number on your motherboard looks like this: "REV: X.X." For example, "REV:

1.0" means the revision of the motherboard is 1.0. Check your motherboard revision before

updating motherboard BIOS, drivers, or when looking for technical information.

Example:

- 3 -

Table of Contents

Box Contents ...................................................................................................................5

Optional Items .................................................................................................................5

Z490 AORUS MASTER Motherboard Layout .................................................................6

Z490 AORUS MASTER Motherboard Block Diagram ....................................................7

Chapter 1 Hardware Installation .....................................................................................9

1-1 Installation Precautions ................................................................................... 9

1-2 ProductSpecications ................................................................................... 10

1-3 Installing the CPU and CPU Cooler............................................................... 14

1-3-1 Installing the CPU ..................................................................................................14

1-3-2 Installing the CPU Cooler ......................................................................................16

1-4 Installing the Memory .................................................................................... 17

1-4-1 DualChannelMemoryConguration ....................................................................17

1-4-2 Installing a Memory ................................................................................................ 18

1-5 Installing an Expansion Card ......................................................................... 19

1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration ............................. 20

1-7 Back Panel Connectors ................................................................................. 21

1-8 Onboard Buttons, Switches and LEDs .......................................................... 23

1-9 Internal Connectors ....................................................................................... 25

Chapter 2 BIOS Setup ..................................................................................................39

2-1 Startup Screen ............................................................................................... 40

2-2 The Main Menu .............................................................................................. 41

2-3 Favorites (F11) ............................................................................................... 43

2-4 Tweaker .......................................................................................................... 44

2-5 Settings .......................................................................................................... 50

2-6 System Info. ................................................................................................... 59

2-7 Boot ................................................................................................................ 60

2-8 Save & Exit .................................................................................................... 63

Chapter3 ConguringaRAIDSet ...............................................................................65

3-1 ConguringSATAControllers ........................................................................ 65

3-2 Installing the RAID/AHCI Driver and Operating System ............................... 79

3-3 Installing an Intel® Optane™ Memory ............................................................. 82

- 4 -

Chapter 4 Drivers Installation .......................................................................................85

4-1 Drivers & Software ......................................................................................... 85

4-2 Application Software ...................................................................................... 86

4-3 Information ..................................................................................................... 86

Chapter 5 Unique Features...........................................................................................87

5-1 BIOS Update Utilities ..................................................................................... 87

5-1-1 Updating the BIOS with the Q-Flash Utility ...........................................................87

5-1-2 Updating the BIOS with the @BIOS Utility ........................................................... 90

5-1-3 Using Q-Flash Plus ................................................................................................91

5-2 APP Center .................................................................................................... 92

5-2-1 EasyTune ................................................................................................................93

5-2-2 Fast Boot ............................................................................................................... 94

5-2-3 Game Boost .......................................................................................................... 95

5-2-4 RGB Fusion ........................................................................................................... 96

5-2-5 Smart Backup ....................................................................................................... 98

5-2-6 System Information Viewer ................................................................................. 100

5-2-7 USB TurboCharger ..............................................................................................101

Chapter 6 Appendix ....................................................................................................103

6-1 ConguringAudioInputandOutput ............................................................ 103

6-1-1 Conguring2/4/5.1/7.1-ChannelAudio ................................................................103

6-1-2 ConguringS/PDIFOut .......................................................................................105

6-1-3 Stereo Mix ........................................................................................................... 106

6-1-4 Using the Voice Recorder ....................................................................................107

6-1-5 DTS:X® Ultra .........................................................................................................108

6-2 Troubleshooting ............................................................................................110

6-2-1 Frequently Asked Questions ...............................................................................110

6-2-2 Troubleshooting Procedure ................................................................................. 111

6-3 Debug LED Codes ........................................................................................113

Regulatory Notices ..................................................................................................117

Contact Us .............................................................................................................. 123

- 5 -

Box Contents

5Z490 AORUS MASTER motherboard

5Motherboard driver disc

5User's Manual

5Quick Installation Guide

5Four SATA cables

5One antenna

5Two RGB LED strip extension cables

5One noise detection cable

5Two thermistor cables

5One G Connector

Optional Items

2-port USB 2.0 bracket (Part No. 12CR1-1UB030-6*R)

eSATA bracket (Part No. 12CF1-3SATPW-4*R)

3.5" Front Panel with 2 USB 3.2 Gen 1 ports (Part No. 12CR1-FPX582-2*R)

The box contents above are for reference only and the actual items shall depend on the product package you

obtain. The box contents are subject to change without notice.

- 6 -

Z490 AORUS MASTER Motherboard Layout

(Note) For debug code information, please refer to Chapter 6.

CNVI_WIFI

HDMI

U32

U32G2

U32G2C

LGA1200

ATX

AUDIO

DDR4_A1

DDR4_A2

DDR4_B1

DDR4_B2

BAT

Intel® Z490

CLR_CMOS

M_BIOS

B_BIOS

THB_C1

THB_C2

USB 2.0 Hub

Intel® GbE LAN

CODEC

PCIEX16

PCIEX8

PCIEX4

F_U32C F_U32

SYS_FAN6_PUMP

DB_PORT (Note)

SYS_FAN1

SYS_FAN2

426080110

M2P_SB

426080110

M2A_CPU

426080110

M2M_SB

Z490 AORUS MASTER

RST_SWF_USB1 F_PANELD_LED1

BIOS_SW

F_AUDIO SPI_TPM

F_USB2 NOISE_

SENSOR

SB LED_C1 SYS_FAN5_

PUMP

SYS_FAN3

CPU_FAN

CPU_OPT

SYS_FAN4

D_LED2

LED_C2

PW_SW

BBIOS_LED

MBIOS_LED

ATX_12V_2X4_2

ATX_12V_2X4_1

USB 2.0 Hub

SATA3 531

420

CPU DRAM

VGA BOOT

REAR_BUTTON

USB20

U32G2_LAN

iTE®

Super I/O

EC_TEMP1

EC_TEMP2

ESS ES9118 DAC

- 7 -

Z490 AORUS MASTER Motherboard Block Diagram

LGA1200 CPU

CPU CLK+/- (100~500 MHz)

DDR4 3200/3000/2933/2666/2400/2133 MHz

PCI Express 3.0 Bus

DMI 3.0

LAN

RJ45

Intel®

2.5GbE LAN

4 SATA 6Gb/s

(SATA3 0~3)

LPC

Bus

SPI

Bus

DDI

PCI Express 3.0 Bus

Center/Subwoofer

Speaker Out

Line Out

MIC

Line In

S/PDIF Out

Rear Speaker Out

CODEC

+

ESS ES9118 DAC

iTE®

Super I/O

8 USB 2.0/1.1

4 USB 3.2 Gen 1

2 USB Type-C™,

USB 3.2 Gen 2

3 USB 3.2 Gen 2

Type A

Intel® Z490

1 PCI Express x16

2 PCI Express x8

x4x4 x1

M2P_SB

M2A_CPU

HDMI 1.4

Switch

PCI Express x4

M2M_SB

SATA3

4/5

or

USB 2.0

Hub

Dual BIOS

TPM

Switch

x16x16

or

M.2 CNVi

WIFI

- 8 -

- 9 -

Hardware Installation

1-1 Installation Precautions

The motherboard contains numerous delicate electronic circuits and components which can become

damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's

manual and follow these procedures:

•Prior to installation, make sure the chassis is suitable for the motherboard.

•Prior to installation, do not remove or break motherboard S/N (Serial Number) sticker or

warranty sticker provided by your dealer. These stickers are required for warranty validation.

•Always remove the AC power by unplugging the power cord from the power outlet before

installing or removing the motherboard or other hardware components.

•When connecting hardware components to the internal connectors on the motherboard, make

sure they are connected tightly and securely.

•When handling the motherboard, avoid touching any metal leads or connectors.

•It is best to wear an electrostatic discharge (ESD) wrist strap when handling electronic

components such as a motherboard, CPU or memory. If you do not have an ESD wrist strap,

keepyourhandsdryandrsttouchametalobjecttoeliminatestaticelectricity.

•Prior to installing the motherboard, please have it on top of an antistatic pad or within an

electrostatic shielding container.

•Before connecting or unplugging the power supply cable from the motherboard, make sure

the power supply has been turned off.

•Before turning on the power, make sure the power supply voltage has been set according to

the local voltage standard.

•Before using the product, please verify that all cables and power connectors of your hardware

components are connected.

•To prevent damage to the motherboard, do not allow screws to come in contact with the

motherboard circuit or its components.

•Make sure there are no leftover screws or metal components placed on the motherboard or

within the computer casing.

•Do not place the computer system on an uneven surface.

•Do not place the computer system in a high-temperature or wet environment.

•Turning on the computer power during the installation process can lead to damage to system

components as well as physical harm to the user.

•If you are uncertain about any installation steps or have a problem related to the use of the

product,pleaseconsultacertiedcomputertechnician.

•If you use an adapter, extension power cable, or power strip, ensure to consult with its installation

and/or grounding instructions.

Chapter 1 Hardware Installation

- 10 -

Hardware Installation

1-2 ProductSpecications

CPU Support for 10th Generation Intel® Core™ i9 processors/Intel® Core™ i7 processors/

Intel® Core™ i5 processors/Intel® Core™ i3 processors/Intel® Pentium® processors/

Intel® Celeron® processors in the LGA1200 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset Intel® Z490 Express Chipset

Memory Intel® Core™ i9/i7 processors:

- Support for DDR4 3200/2933/2666/2400/2133 MHz memory modules

Intel® Core™ i5/i3/Pentium®/Celeron® processors:

- Support for DDR4 2666/2400/2133 MHz memory modules

 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity)

of system memory

Dual channel memory architecture

 Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in

non-ECC mode)

Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

SupportforExtremeMemoryProle(XMP)memorymodules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard

Graphics

Integrated Graphics Processor-Intel® HD Graphics support:

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz

* Support for HDMI 1.4 version and HDCP 2.3.

Maximum shared memory of 512 MB

Audio Realtek® ALC1220-VB codec

* The front panel line out jack supports DSD audio.

ESS ES9118EQ DAC chip

Support for DTS:X® Ultra

HighDenitionAudio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN Intel® 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)

Wireless

Communication

Module

Intel® Wi-Fi 6 AX201

- WIFI a, b, g, n, ac with wave 2 features, ax, supporting 2.4/5 GHz Dual-Band

- BLUETOOTH 5.0

- Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate

* Actual data rate may vary depending on environment and equipment.

Expansion Slots 1 x PCI Express x16 slot, running at x16 (PCIEX16)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x8 (PCIEX8)

* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is

populated, the PCIEX16 slot operates at up to x8 mode.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Multi-Graphics

Technology

 Support for NVIDIA® Quad-GPU SLI™ and 2-Way NVIDIA® SLI™ technologies

 Support for AMD Quad-GPU CrossFire™ and 2-Way AMD CrossFire™ technologies

- 11 -

Hardware Installation

Storage Interface  1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 PCIe x4/x2

SSD support) (M2P_SB)

 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe

x4/x2 SSD support) (M2A_CPU)

 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe

x4/x2 SSD support) (M2M_SB)

6 x SATA 6Gb/s connectors

Support for RAID 0, RAID 1, RAID 5, and RAID 10

* Refer to "1-9 Internal Connectors," for the installation notices for the M.2 and SATA

connectors.

Intel® Optane™ Memory Ready

USB Chipset:

- 2 x USB Type-C™ ports, with USB 3.2 Gen 2 support (1 port on the back panel,

1 port available through the internal USB header)

- 3 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

- 4 x USB 3.2 Gen 1 ports (2 ports on the back panel, 2 ports available through

the internal USB header)

Chipset+2 USB 2.0 Hubs:

- 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through

the internal USB headers)

Internal

Connectors

1 x 24-pin ATX main power connector

2 x 8-pin ATX 12V power connectors

1 x CPU fan header

1 x water cooling CPU fan header

4 x system fan headers

2 x system fan/water cooling pump headers

2 x addressable LED strip headers

2 x RGB LED strip headers

3 x M.2 Socket 3 connectors

6 x SATA 6Gb/s connectors

1 x front panel header

1 x front panel audio header

1 x USB Type-C™ header, with USB 3.2 Gen 2 support

1 x USB 3.2 Gen 1 header

2 x USB 2.0/1.1 headers

1 x noise detection header

2 x Thunderbolt™ add-in card connectors

 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI

2.0 module only)

1 x power button

1 x reset button

2 x temperature sensor headers

1 x Clear CMOS jumper

2 x BIOS switches

- 12 -

Hardware Installation

Back Panel

Connectors

1 x Q-Flash Plus button

1 x Clear CMOS button

2 x SMA antenna connectors (2T2R)

1 x HDMI port

1 x USB Type-C™ port, with USB 3.2 Gen 2 support

3 x USB 3.2 Gen 2 Type-A ports (red)

2 x USB 3.2 Gen 1 ports

4 x USB 2.0/1.1 ports

1 x RJ-45 port

1 x optical S/PDIF Out connector

5 x audio jacks

I/O Controller iTE® I/O Controller Chip

Hardware

Monitor

Voltage detection

Temperature detection

Fan speed detection

Watercoolingowratedetection

Overheating warning

Fan fail warning

Fan speed control

* Whether the fan (pump) speed control function is supported will depend on the fan

(pump) you install.

Noise detection

BIOS 2x256Mbitash

Use of licensed AMI UEFI BIOS

Support for DualBIOS™

PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Unique Features Support for APP Center

* Available applications in APP Center may vary by motherboard model. Supported

functionsofeachapplicationmayalsovarydependingonmotherboardspecications.

- @BIOS

- EasyTune

- Fast Boot

- Game Boost

- RGB Fusion

- Smart Backup

- System Information Viewer

- USB TurboCharger

Support for Q-Flash Plus

Support for Q-Flash

Support for Xpress Install

- 13 -

Hardware Installation

Please visit GIGABYTE's website

for support lists of CPU, memory

modules, SSDs, and M.2 devices.

Please visit the Support\Utility List

page on GIGABYTE's website to

download the latest version of apps.

Bundled

Software

Norton® Internet Security (OEM version)

cFosSpeed

XSplit Gamecaster + Broadcaster (12 months license)

Operating

System Support for Windows 10 64-bit

Form Factor ATX Form Factor; 30.5cm x 24.4cm

* GIGABYTEreservestherighttomakeanychangestotheproductspecicationsandproduct-relatedinformationwithout

prior notice.

- 14 -

Hardware Installation

1-3 Installing the CPU and CPU Cooler

Read the following guidelines before you begin to install the CPU:

•Make sure that the motherboard supports the CPU.

(Go to GIGABYTE's website for the latest CPU support list.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

CPU to prevent hardware damage.

•Locate the pin one of the CPU. The CPU cannot be inserted if oriented incorrectly. (Or you may

locate the notches on both sides of the CPU and alignment keys on the CPU socket.)

•Apply an even and thin layer of thermal grease on the surface of the CPU.

•Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage

of the CPU may occur.

•SettheCPUhostfrequencyinaccordancewiththeCPUspecications.Itisnotrecommended

thatthesystembusfrequencybesetbeyondhardwarespecicationssinceitdoesnotmeetthe

standard requirements for the peripherals. If you wish to set the frequency beyond the standard

specications,pleasedosoaccordingtoyourhardwarespecicationsincludingtheCPU,graphics

card, memory, hard drive, etc.

1-3-1 Installing the CPU

A. Locate the alignment keys on the motherboard CPU socket and the notches on the CPU.

Please visit GIGABYTE's website for details on hardware installation.

Triangle Pin One Marking on the CPU

NotchNotch

LGA1200 CPU

Alignment

Key

Alignment

Key

LGA1200 CPU Socket

Pin One Corner of the CPU Socket

- 15 -

Hardware Installation

B. Follow the steps below to correctly install the CPU into the motherboard CPU socket.

•Before installing the CPU, make sure to turn off the computer and unplug the power cord from

the power outlet to prevent damage to the CPU.

•To protect the socket contacts, do not remove the protective plastic cover unless the CPU is

inserted into the CPU socket. Save the cover properly and replace it if the CPU is removed.

Step 1:

Gently press the CPU socket lever handle down

andawayfromthesocketwithyournger.Then

completely lift the CPU socket lever and the metal

load plate/plastic cover will be lifted as well.

Step 2:

HoldtheCPUwithyourthumbandindexngers.

Align the CPU pin one marking (triangle) with the

pin one corner of the CPU socket (or you may align

the CPU notches with the socket alignment keys)

and gently insert the CPU into position.

Step 4:

Finally, secure the lever under its retention tab to

complete the installation of the CPU.

NOTE:

Hold the CPU socket lever by the handle, not the lever base portion.

Step 3:

Once the CPU is properly inserted, carefully

replace the load plate. When replacing the load

plate, make sure the front end of the load plate

is under the shoulder screw. Then press the CPU

socket lever. The protective plastic cover may

pop off from the load plate during the process of

engaging the lever. Remove the cover. (Save the

cover properly and always replace it when the

CPU is not installed.)

- 16 -

Hardware Installation

1-3-2 Installing the CPU Cooler

Refer to the steps below to correctly install the CPU cooler on the motherboard. (Actual installation process may

differ depending the CPU cooler to be used. Refer to the user's manual for your CPU cooler.)

Step 5:

After the installation, check the back of the

motherboard. If the push pin is inserted as the

picture above shows, the installation is complete.

Step 6:

Finally, attach the power connector of the CPU

cooler to the CPU fan header (CPU_FAN) on the

motherboard.

Step 1:

Apply an even and thin layer of thermal grease on

the surface of the installed CPU.

Step 2:

Before installing the cooler, note the direction of the

arrow sign on the male push pin. (Turning the

push pin along the direction of arrow is to remove

the cooler, on the contrary, is to install.)

Step 3:

Place the cooler atop the CPU, aligning the

four push pins through the pin holes on the

motherboard. Push down on the push pins

diagonally.

Step 4:

You should hear a "click" when pushing down each

push pin. Check that the Male and Female push

pins are joined closely.

(Refer to your CPU cooler installation manual for

instructions on installing the cooler.)

Male

Push Pin

Female

Push Pin

The Top

of Female

Push Pin

Direction of

the Arrow Sign

on the Male

Push Pin

- 17 -

Hardware Installation

1-4 Installing the Memory

Read the following guidelines before you begin to install the memory:

•Make sure that the motherboard supports the memory. It is recommended that memory of the same

capacity, brand, speed, and chips be used.

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.)

•Always turn off the computer and unplug the power cord from the power outlet before installing the

memory to prevent hardware damage.

•Memory modules have a foolproof design. A memory module can be installed in only one direction.

If you are unable to insert the memory, switch the direction.

1-4-1 DualChannelMemoryConguration

This motherboard provides four memory sockets and supports Dual Channel Technology. After the memory

isinstalled,theBIOSwillautomaticallydetectthespecicationsandcapacityofthememory.EnablingDual

Channel memory mode will double the original memory bandwidth.

The four memory sockets are divided into two channels and each channel has two memory sockets as following:

Channel A: DDR4_A1, DDR4_A2

Channel B: DDR4_B1, DDR4_B2

RecommandedDualChannelMemoryConguration:

Due to CPU limitations, read the following guidelines before installing the memory in Dual Channel mode.

1. Dual Channel mode cannot be enabled if only one memory module is installed.

2. When enabling Dual Channel mode with two or four memory modules, it is recommended that memory

of the same capacity, brand, speed, and chips be used.

(SS=Single-Sided, DS=Double-Sided, "- -"=No Memory)

DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

2 Modules - - DS/SS - - DS/SS

4 Modules DS/SS DS/SS DS/SS DS/SS

DDR4_A1

DDR4_A2

DDR4_B1

DDR4_B2

- 18 -

Hardware Installation

1-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power cord

from the power outlet to prevent damage to the memory module. DDR4 and DDR3 DIMMs are not

compatible to each other or DDR2 DIMMs. Be sure to install DDR4 DIMMs on this motherboard.

Notch

DDR4 DIMM

ADDR4memorymodulehasanotch,soitcanonlytinonedirection.Followthestepsbelowtocorrectlyinstall

your memory modules in the memory sockets.

Step 1:

Note the orientation of the memory module. Spread the retaining clips

at both ends of the memory socket. Place the memory module on the

socket.Asindicatedinthepictureontheleft,placeyourngerson

the top edge of the memory, push down on the memory and insert it

vertically into the memory socket.

Step 2:

The clips at both ends of the socket will snap into place when the

memory module is securely inserted.

- 19 -

Hardware Installation

1-5 Installing an Expansion Card

Read the following guidelines before you begin to install an expansion card:

•Make sure the motherboard supports the expansion card. Carefully read the manual that came

with your expansion card.

•Always turn off the computer and unplug the power cord from the power outlet before installing an

expansion card to prevent hardware damage.

PCI Express x16 Slot

Follow the steps below to correctly install your expansion card in the expansion slot.

1. Locate an expansion slot that supports your card. Remove the metal slot cover from the chassis back panel.

2. Align the card with the slot, and press down on the card until it is fully seated in the slot.

3. Make sure the metal contacts on the card are completely inserted into the slot.

4. Secure the card's metal bracket to the chassis back panel with a screw.

5. After installing all expansion cards, replace the chassis cover(s).

6. Turn on your computer. If necessary, go to BIOS Setup to make any required BIOS changes for your

expansion card(s).

7. Install the driver provided with the expansion card in your operating system.

Example: Installing and Removing a PCI Express Graphics Card:

•Installing a Graphics Card:

Gently push down on the top edge of the card until

it is fully inserted into the PCI Express slot. Make

sure the card is securely seated in the slot and

does not rock.

•Removing the Card:

Gently push back on the lever on the slot and then lift the card straight out from

the slot.

- 20 -

Hardware Installation

B. Connecting the Graphics Cards

Step 1:

Observe the steps in "1-5 Installing an Expansion Card" and install the graphics cards on the PCIEX16 and

PCIEX8 slots.

Step 2:

Insert the CrossFire (Note)/SLI bridge connectors in the CrossFire/SLI gold edge connectors on top of the cards.

Step 3:

Plug the display cable into the graphics card on the PCIEX16 slot.

Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and

driver version. Refer to the manual that came with your graphics cards for more information about

enabling CrossFire/SLI technology.

1-6 Setting up AMD CrossFire™/NVIDIA® SLI™Conguration

(Note) The bridge connector(s) may be needed or not depending on your graphics cards.

A. System Requirements

-Windows 10 64-bit operating system

-A CrossFire/SLI-supported motherboard with two PCI Express x16 slots and correct driver

-CrossFire/SLI-ready graphics cards of identical brand and chip and correct driver

-CrossFire(Note)/SLI bridge connectors

-Apowersupplywithsufcientpowerisrecommended(Refertothemanualofyourgraphicscardsforthe

power requirement)

C.ConguringtheGraphicsCardDriver

C-1. To Enable CrossFire Function

After installing the graphics card driver in the operating

system, go to the AMD RADEON SETTINGS screen.

Browse to Gaming\Global Settings and ensure AMD

CrossFire is set to On.

C-2. To Enable SLI Function

After installing the graphics card driver in the operating

system, go to the NVIDIA Control Panel. Browse to the

CongureSLI, Surround,PhysX screen and ensure

Maximize 3D performance is enabled.

La pagina si sta caricando...

Gigabyte Z490 AORUS MASTER Manuale del proprietario

Gigabyte Z490 AORUS MASTER Manuale del proprietario

in altre lingue

Documenti correlati