Philips BRI947/00 Manuale utente

Lumea

BRI940, BRI944,

BRI945, BRI946,

BRI947, BRI948

1

2a

7

36

4

14

15

16

BRI940: 2a

BRI944, BRI945: 2a, 2b

BRI946: 2a, 2b, 2e

BRI947, BRI948: 2a, 2b, 2c, 2d

2d

3

4

2e

3

4

1

8

12

11

9

10

17

18

2c

3

4

2b

3

4

5

13

Suitable skin tones / Geeignete Hauttöne /

Tonos adecuados de piel / Teints de peau

compatibles / Toni di pelle adatti / Geschikte

huidtinten / Tons de pele adequados

Suitable body hair colors / Geeignete

Körperhaarfarben / Colores de vello

corporal adecuados / Couleurs de poils du

corps adaptées / Adatto ai seguenti colori di

peli / Geschikte kleuren lichaamshaar /

Cores de pelo adequadas

English 6

Deutsch 30

Español 58

Français 83

Italiano 108

Nederlands 133

Português 159

English

6English

Contents

Welcome_________________________________________________________________________________ 6

Device overview___________________________________________________________________________ 7

Contraindications _________________________________________________________________________ 7

Important safety instructions _______________________________________________________________ 9

How IPL works ____________________________________________________________________________ 11

Recommended treatment schedule__________________________________________________________ 12

What to expect ___________________________________________________________________________ 13

How to use your Lumea ____________________________________________________________________ 13

Learning more about your Lumea ___________________________________________________________ 19

Attachments______________________________________________________________________________ 19

SmartSkin sensor __________________________________________________________________________ 20

Selecting the light intensity _________________________________________________________________ 21

Two treatment modes: Stamp & Flash and Slide & Flash ________________________________________ 21

Using your Lumea before and after sun exposure or tanning ____________________________________ 22

Traveling with the device ___________________________________________________________________ 22

After use _________________________________________________________________________________ 23

Troubleshooting __________________________________________________________________________ 24

Warranty and support _____________________________________________________________________ 26

Recycling_________________________________________________________________________________ 26

Technical specifications ____________________________________________________________________ 27

Electromagnetic compatibility – Compliance information _______________________________________ 27

Explanation of symbols_____________________________________________________________________ 27

Welcome

Welcome to the world of Philips Lumea! You are only a few weeks away from

silky-smooth skin.

Lumea uses Intense Pulsed Light (IPL) technology, known as one of the most

effective methods to continuously prevent hair growth. In close collaboration

with expert scientists and dermatologists, we adapted this light-based

technology, originally used in professional beauty salons, for easy and effective

use in the comfort of your home. Lumea is gentle and offers convenient and

effective treatment at a light intensity that you find comfortable. Unwanted

hairs are finally a thing of the past.

Lumea can be used on the body and on the female face (below the cheekbone).

To fully benefit from the support that Philips offers, register your product at

www.philips.com/support. For further information, please go to

www.philips.com/Lumea to find our experts' advice, tutorial videos and FAQs

and make the most of your Lumea.

Note: Keep these instructions with your product at all times.

7

English

Device overview

1 Light exit window (with

integrated UV filter)

2 Attachments

a Body attachment

b Face attachment (BRI944,

BRI945, BRI946, BRI947,

BRI948)

c Bikini attachment (BRI947,

BRI948)

d Underarm attachment

(BRI947, BRI948)

e Precision attachment

(BRI946)

3 SmartSkin sensor

4 Integrated safety system

5 Reflector inside the attachment

6 Electronic contacts

7 Opening for electronic contacts

8 Flash button

9 On/off button

10 Confirmation button

11 Toggle buttons

12 Intensity lights

13 SmartSkin button

14 'READY to flash' light

15 Air vents

16 Device socket

17 Adapter

18 Small plug

19 Pouch (not shown)

20 Cleaning cloth (not shown)

Contraindications

Conditions

Never use the device:

-If you are under the age of 18years or above 65years.

-If you have skin tone marked with in the 'Suitable skin tones' table at the

start of the user manual.

-If you are pregnant or breastfeeding as the device was not tested on

pregnant or breastfeeding women.

-If you have any active implants such as a pacemaker, neurostimulator, insulin

pump, etc.

Medications/History

Never use the device if you take any of the medications listed below:

-If your skin is currently being treated with or has been treated in the last

7days with Alpha-Hydroxy Acids (AHAs), Beta-Hydroxy Acids (BHAs), topical

tretinoin and azelaic acid.

-If you have taken any form of isotretinoin Accutane or Roaccutane in the last

six months. This treatment can make skin more susceptible to tears, wounds

and irritations.

-If you are taking photosensitizing agents or medications, check the package

insert of your medicine and never use the device if it is stated that it can

cause photo-allergic reactions, photo-toxic reactions or if you have to avoid

sun when taking this medicine.

8English

-If you take anticoagulation medications, including heavy use of aspirin, in a

manner which does not allow for a minimum 1-week washout period prior

to each treatment.

Never use the device:

-If you have received radiation therapy or chemotherapy within the past

3months.

-If you are on painkillers which reduce the skin's sensitivity to heat.

-If you take immunosuppressive medications.

Pathologies/Disorders

Never use the device:

-If you have diabetes or other systemic or metabolic diseases.

-If you have congestive heart disease.

-If you have a disease related to photosensitivity, such as polymorphic light

eruption (PMLE), solar urticaria, porphyria, etc.

-If you have a history of collagen disorder, including a history of keloid scar

formation or a history of poor wound healing.

-If you have epilepsy with flashlight sensitivity.

-If your skin is sensitive to light and easily develops a rash or an allergic

reaction.

-If you have a skin disease such as active skin cancer, you have a history of

skin cancer or any other localized cancer in the areas to be treated.

-If you have a history of vascular disorder, such as the presence of varicose

veins or vascular ectasia in the areas to be treated.

-If you have any bleeding disorder.

-If you have a history of immunosuppressive disease (including HIV infection

or AIDS).

-If you have a skin pigmentation disorder such as vitiligo.

Skin conditions

Never use the device:

-If you have infections, eczema, burns, inflammation of hair follicles, open

lacerations, abrasions, herpes simplex (cold sores), wounds or lesions and

haematomas (bruises) in the areas to be treated.

-On irritated (red or cut), sunburned, tanned or fake‑tanned skin.

-On the following areas: on moles, freckles, large veins, darker pigmented

areas, scars, skin anomalies without consulting your doctor. This can result in

a burn and a change in skin tone, which makes it potentially harder to

identify skin-related diseases.

-On the following areas: warts, tattoos or permanent make-up.

9

English

Location/Areas

Never use the device on the following areas:

-Around the eyes and on or near the eyebrows. Lumea can only be used on

the body and on the female face (below the cheekbone).

-On the lips, scalp, perineum, nipples, areolas, labia minora, vagina, anus and

the inside of the nostrils and ears.

-On areas where you use long-lasting deodorants. This can result in skin

reactions.

-Over or near anything artificial like silicone implants, subcutaneous injection

ports (insulin dispenser) or piercings.

-Men must not use the device on the face and neck including all beard-

growing areas, nor on the whole genital area. The hairs in these areas have

different characteristics. The skin may get burnt (with pain, prolonged skin

redness and pigmentary changes).

Note: This list is not exhaustive. If you are not sure whether you can use the

device, we advise you to consult your doctor.

Important safety instructions

Warnings

Please read and follow these instructions to optimize the use of the device and

prevent/minimize the risk of injury, skin reactions and side effects.

-Before you use Lumea, you should clean your skin and make sure it is

hair‑free, entirely dry and free from any lotion or gel.

-Keep the device and the adapter dry.

-The device is not washable. Never immerse the device in water and do not

rinse it under the tap.

-Water and electricity are a dangerous combination. Do not use this device in

wet surroundings (e.g. near a filled bath, a running shower or a filled

swimming pool). Moisture can damage the device and lead to a potential

safety hazard.

-Always check the device before you use it. Do not use the device or adapter

if it is damaged. Always replace a damaged part with one of the original

type.

-If the device or adapter is broken or damaged, do not touch any inner part

to avoid electric shock.

-Do not use the device if the UV filter of the light exit window and/or

attachment is broken, as safe operation cannot be guaranteed under these

circumstances.

-Do not attempt to open or repair your device. Opening Philips Lumea may

expose you to dangerous electrical components and to pulsed light energy,

either of which may cause bodily and/or eye injury.

-Always return the device to a service center authorized by Philips for

examination or repair. Repair by unqualified people could cause an

extremelyhazardous situation for the user.

10 English

-No modification of this equipment is allowed. Do not modify, override or cut

off any part of the device (e.g. adapter or the cord), as this causes a

hazardous situation.

-Do not look at the flash while using the device. Use the device in a well-lit

room so that the light is less glaring to your eyes. While not necessary for

safety, you may wear sunglasses or goggles for your convenience if you find

the light uncomfortable or too bright.

-Do not flash the same spot multiple times during a treatment. The surface of

the attachment should overlap the previous spot to make sure you flash the

complete skin area, but treating the same area multiple times does not

increase efficacy.

-For hygienic reasons, the device should only be used by one person.

-Do not use hair removal creams in the area (to be) treated with the device,

as chemicals may cause skin reactions.

-Do not use any pencil or pen to mark the areas to be treated. This may cause

burns on your skin.

-The device can be stored at a temperature between -25°C and 70°C. Use

the device at a temperature between 5°C and 35°C. The device will not

work properly outside of this temperature range. This may cause burns on

your skin.

-Hair removal by intense pulsed light sources can cause increased hair growth

in some individuals. Based upon currently available data, the highest risk

groups for this response are females of Mediterranean, Middle Eastern, and

South Asian heritage treated on the face and neck.

-If you experience skin irritation or skin redness after treatment, wait until it

disappears before applying any product to your skin. If you experience skin

irritation after applying a product to your skin, wash it off with water. If you

still get skin reactions, stop using the device and consult your doctor.

-If shaving, epilating or waxing causes skin irritation, we advise you not to use

the device until the skin irritation has disappeared.

-This device is not intended for use by persons with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the device by a

person responsible for their safety.

-Keep Lumea out of the reach of children.

-Children should be supervised to ensure that they do not play with the

device. Supervision is required to avoid potential risks such as exposure to

the light output, electrocution, strangulation from the cables or choking on

the attachments.

-Always avoid exposure to natural sunlight and artificial sunlight up to

4weeks before your Lumea treatment and 48hours afterward. Sensitive or

tanned skin is more likely to result in burns or pigmentation changes. Protect

your skin from sunlight with clothing or apply sun-blocking products of not

less than SPF50 on the non-covered treatment areas. Read the instructions in

chapter 'Using your Lumea before and after sun exposure or tanning' to

learn how to use your Lumea safely.

11

English

-Do not use your Lumea within 2weeks after using artificial tanning products

(such as creams, sprays or pills). Artificially tanned skin is more likely to result

in burns or pigmentation changes. Read the instructions in chapter 'Using

your Lumea before and after sun exposure or tanning' to learn how to use

your Lumea safely.

-If you notice a skin tone change since the last treatment, we advise you to

perform a skin test and to wait 24 hours before your next treatment. If after

this period skin reactions occur or persist, use a lower device setting which

did not lead to skin reactions or stop using the device when already at the

lowest setting (➀).

-Always check the device before you use it. Make sure that the SmartSkin

sensor window is clean when using the device, to avoid improper operation

(see 'D Clean & store after treatment').

-The light exit window and the inner parts of the attachment can become

very hot (>210°C) during usage. Always let the light exit window, as well as

the inner parts of the attachment, cool down before you touch them.

-This device has a detachable power supply unit. Only use the adapter

provided with this device. Do not use an extension cord. The reference

number (AD2069x20020HF) can be found on your device. The 'x' in this

number refers to the plug type for your country.

-Follow the recommended treatment schedule. Increasing the frequency,

especially in the initial phase, can increase the risk of skin reactions.

How IPL works

1

With Intense Pulsed Light technology, gentle pulses of light are applied to the

skin and absorbed by the hair root. The lighter the skin and the darker the hair,

the better the pulses of light are absorbed.

2

The pulses of light stimulate the hair follicle to go into a resting phase. As a

consequence, the hair sheds naturally and hair growth is prevented.

12 English

3

The cycle of hair growth consists of different phases. IPL technology is only

effective when the hair is in its growing phase. Not all hairs are in the growing

phase at the same time. This is why we recommend you to follow the initial

treatment phase (4 treatments, every treatment 2 weeks apart) and then the

follow‑up treatment phase (touch‑ups every 4 weeks) to make sure all hairs are

effectively treated in the growing phase.

Tip: To assure long lasting hair removal, touch-ups every 4 weeks are

recommended.

Suitable body hair colors

Treatment with Lumea is not effective if you have light blond, grey, red or white

hairs as hairs with these colors do not absorb enough light.

Note: To check if your body hair color allows usage of the device, consult the

hair color table on the foldout page.

Recommended treatment schedule

Initial phase

To achieve effective hair reduction, follow the initial treatment schedule.

Initial treatment schedule

For the first 4treatments, use Lumea once every 2weeks to ensure that all hairs

are treated.

-Perform a treatment within 3days before or after the planned treatment

date.

-If you have not treated yourself within 3days before or after the planned

treatment date, restart the initial phase. Plan in 4treatments, 1treatment

every 2weeks.

Note: If you do not restart the initial phase, you may not see effective hair

reduction.

Note: Replacing one of the IPL treatments with another hair removal method

(waxing, epilating, etc.) will not help to reach the desired hair reduction.

If you want to remove hairs in between the Lumea treatments, you can use your

normal hair removal method (excluding hair removal creams).

Touch-up phase

After the initial phase (4 treatments), we recommend touch-ups every 4 weeks.

13

English

Touch-up treatment schedule

Perform a treatment every 4weeks. Repeat this 8 times to achieve effective hair

reduction. This is to maintain results and enjoy smooth skin for months.

-We advise you to perform a treatment within 4days before or after the

planned treatment date.

-The results may vary based on your individual hair growth and also across

different body areas.

-If you have completed the touch-up phase and you see the need to continue

treatment (hair starts coming back), we advise you to restart the initial

phase.

Note: Using the device more often does not increase efficacy.

Tip: Mark the treatment schedule on your calendar to remind yourself of the

planned treatments.

What to expect

During initial phase

-Afterthe first treatment, it can take 1 to 2 weeks for the hairs to fall out. In

the first weeks following the initial treatments, you still see some hairs

growing.These are likely to be hairs that were not in their growing phase

during the first treatments.

-After 2-3 treatments, you should see a noticeable reduction in hair growth.

However, to effectively treat all hairs, it is important to keep on treating

according to the recommended treatment schedule.

-After 4treatments, you should see a significant reduction of hair growth in

the areas that you treated with Lumea. A reduction of hair density should be

visible as well.

During touch-up phase

-Keep on treating with frequent touch-ups (every 4 weeks) to maintain the

result.

How to use your Lumea

A Remove hair & clean your skin

1Remove hair before every treatment as long as hair is still visible. You can

either shave, epilate or wax. Make sure you start to treat before new hair is

visible on your skin. If you choose to wax, wait 24 hours before you use

Lumea.

Note: If shaving, epilating or waxing causes skin irritation, we advise you not

to use the device until the skin irritation has disappeared.

14 English

2Clean and dry your skin. Make sure that it is free from any lotion or gel.

B Test skin 24 hours before treatment

1Test your skin to find the correct light setting:

-For every new body area and/or new attachment.

-After sun exposure or tanning (see 'Using your Lumea before and after sun

exposure or tanning').

2Select the correct attachment to test your skin (see 'Attachments').

3Press the on/off button to turn on the device.

4Choose an area for your skin test.

5Press the device firmly onto your skin and hold it in place.

The integrated safety system prevents unintentional flashingwithout full

skin contact.

15

English

6Confirm that the 'READY to flash' light lights up white to ensure that there is

full contact with your skin.

-If the 'READY to flash' light is orange, your skin is too dark to treat. Try

Lumea on a lighter body area.

7Try each setting on your skin and find your comfortable setting.

If the flash feels uncomfortable and you experience pain, lower the setting.

If you still experience an uncomfortable feeling while using the lowest

setting (➀), please stop using the device.

-When the 'READY to flash' light is white, press the flash button on the

handle once, to treat one spot with setting ➀.

The device makes a soft popping sound. The flash gives you a warm

sensation.

• You will see a flash of light.

Note: You can toggle through the light intensity settings by pressing the

toggle button.

-Move to next area. Treat one spot with setting ➁

1

2

3

4

5

-Move to next area. Treat one spot with setting ➂

-Move to next area. Treat one spot with setting ➃

-Move to next area. Treat one spot with setting ➄

24 hours

8Wait 24 hours.

Note: Even though you found your comfortable setting during the skin test,

it may occur that skin reactions show within 24hours after usage.

16 English

9Check your skin for any reactions (e.g. redness, irritation, rash).

If there are no skin reactions after 24hours, start the treatment with the

highest comfortable setting.

If the highest comfortable setting resulted in a skin reaction, choose a lower

setting that did not result in any skin reactions.

If you did not test a lower setting, repeat the skin test.

C Treatment

IMPORTANT: First finish sections A (Remove hair & clean your skin) and B (Test

skin 24hours before treatment) before starting treatment.

1Connect the power adapter to the device and plug into a power outlet.

2Press the on/off button to turn on the device.

3Choose the setting you selected after the skin test (section B, step 9).

17

English

4Press the device firmly onto your skin and hold it in place. The 'READY to

flash' light should light up white.

5Press the flash button to release a flash on your skin. The flash treats the skin

in that spot.

The device makes a soft popping sound. The flash gives you a warm

sensation.

After each flash, it takes up to 3.5 seconds until the device is ready to flash

again. You can release a flash when the 'READY to flash' light lights up

white.

6Move to an adjacent spot and press the flash button again. The surface of

the attachment that is in contact with your skin is slightly larger than the

light exit window.

Do not flash the same spot multiple times during a treatment. The surface of

the attachment should overlap the previous spot to make sure you flash the

complete skin area, but treating the same area multiple times does not

increase efficacy.

7Continue until you have treated the full area. There are two treatment

modes (see 'Two treatment modes: Stamp & Flash and Slide & Flash').

8Turn off the device when you finished the treatment.

9Remove hair before every next treatment, as long as hair is still visible.

Note: Do not try the device on difficult or sensitive areas (ankle and bony area).

D Clean & store after treatment

1Unplug the device from the power outlet.

2Let the device cool down.

18 English

3Moisten the soft cloth supplied with a few drops of water.

4Take the attachment off the device.

A

5Clean the light exit window of the device (A).

D

E

CB

6Clean all surfaces of the attachment, including the metal reflector and

window of the attachment (parts B, C, D, E).

7Let all parts dry thoroughly.

8Store in a dust-free and dry place.

19

English

Learning more about your Lumea

Attachments

For optimal results, it is important to use the correct attachment intended for

the specific body area you want to treat. Lumea offers full‑body treatment with

several attachments designed for use on specific body areas. SenseIQ

technology adapts the treatment program when a different attachment is

connected.

Note: The device may not work anymore and show an error when there is dirt

on the attachment connector. Clean the contact leads when this occurs.

To place the attachment, simply snap it onto the light exit window.

To remove the attachment, pull it off the light exit window.

Body attachment

The body attachment has the largest treatment window and a curved-in design

to effectively cover and treat areas below the neckline, especially large areas

such as legs, arms and stomach.

Face attachment (BRI944, BRI945, BRI946, BRI947, BRI948)

The face attachment has a precise flat design with extra integrated red glass

filter for safe and precise treatment on the sensitive skin above the upper lip,

chin and sideburns. The device is only intended for removing unwanted body

hair from areas below the cheekbones. When you use the device on areas with

sharp contours like the jawline and chin, it may be difficult to establish full skin

contact and release a flash.

Tip: Place your tongue between your upper lip and your teeth or puff out your

cheeks to make the treatment easier.

20 English

Underarm attachment (BRI947, BRI948)

The underarm attachment has a specifically curved-out design to treat

underarm hairs that might be hard to reach.

Bikini attachment (BRI947, BRI948)

The bikini attachment has a specialized design for effective treatment of the

bikini area. It has a curved-out design and has a higher light intensity compared

to body attachment. Hair in this area tends to be thicker and stronger than leg

hair.

Precision attachment (BRI946)

The precision attachment has a curved-out design for use on bikini and

underarm areas. It has a medium sized window with a glass window. It is

designed for precise and effective coverage of bikini and underarm areas.

SmartSkin sensor

Lumea offers SenseIQ technology for a personalized hair removal treatment.

The integrated SmartSkin sensor measures the skin tone at the start of each

session and during the session. This provides two features:

1The SmartSkin sensor prevents you to treat areas of your skin that are too

dark: if it detects a skin tone that is too dark for treatment with Lumea, the

'READY to flash' light starts blinking orange. It does not flash when you press

the flash button. The device automatically disables. This prevents you from

developing skin reactions.

2The SmartSkin sensor will help you to select the light intensity setting that is

comfortable for your skin. For this you can use the SmartSkin button .

La pagina si sta caricando...

Philips BRI947/00 Manuale utente

Questo manuale è adatto anche per

Philips BRI947/00 Manuale utente

in altre lingue

Documenti correlati