Magellan Mapsend Direct Route - GPS Map Guida Rapida

MapSend

®

DirectRoute

™

Quick Start Guide

Manuel de l’utilisateur

Benutzerhandbuch

Manuale dell’utente

Magellan, MapSend, and DirectRoute are trademarks of Thales Navigation.

Magellan MapSend DirectRoute

Quick Start Guide

3

All global positioning system (GPS) receiver products are navigation aids, and

are not intended to replace other methods of navigation. Purchaser is advised

to use good judgment in the use of this product.

READ THE USER GUIDE CAREFULLY BEFORE USING

THE PRODUCT.

The MapSend DirectRoute software is a navigation aid designed to assist you in

arriving at your selected destinations. When using the MapSend DirectRoute

software with your Magellan GPS receiver, these safety rules must be followed to

prevent accidents that can result in injury or death to yourself or others:

• The Magellan GPS receiver must not be used while engaged in any

activity requiring the user's full attention to the environment. For

instance, the Magellan GPS receiver should be operated only by vehicle

passengers when the vehicle is moving, or by the driver when the vehicle

has come to a complete stop. A driver must not attempt to view the

display while driving. A climber must not attempt to view the display

while negotiating treacherous terrain.

•It is your responsibility to ensure compliance to all traffic laws, including

pedestrian observance of crosswalks, and to use good judgment while

operating a Magellan GPS receiver. Disregard any unsafe, hazardous or

illegal route suggestions.

WARNING

4

• The MapSend DirectRoute database does not include, analyze, process,

consider or reflect any of the following: legal restrictions (such as weight,

height, width, load and speed restrictions); road slope or grade; bridge

height, width, weight or other limits; population density; neighborhood

quality or safety; availability or proximity of law enforcement, emergency

rescue, medical or other assistance; construction work zones or hazards;

road, sidewalk or waterway closures or conditions; weather conditions;

pavement characteristics or conditions; special events; traffic congestion;

time of day.

•While every attempt is made to ensure that the MapSend DirectRoute

database is accurate at the time of delivery; roadways, points of interest

and business/service locations may change over time.

5

Magellan

®

MapSend

®

DirectRoute

™

Quick Start Guide

Overview

MapSend DirectRoute Europe provides detailed Navtech® street maps and

points of interest for France, Germany, Austria, and Switzerland. MapSend

DirectRoute also includes basic, automated street routing and guidance

functions. When you use DirectRoute with a street route activated, you get

visual and auditory turn-by-turn guidance prompts that take the guesswork out

of finding your way in a new place. You can view the map on the PC and mark

and upload sections of the map to your qualifying Magellan GPS receiver or

Secure Digital (SD) memory card. Depending upon the available memory in

your handheld or the SD card, you may be able to store and access a city, state

or a larger map area.

Note: Maps you define with MapSend DirectRoute are for use with one GPS

receiver.

Overview ........................................................................................................5

System Requirements ......................................................................................7

Installation ......................................................................................................8

Using MapSend DirectRoute on the PC .........................................................9

Using DirectRoute on the GPS Receiver .......................................................17

Tr oubleshooting ............................................................................................25

Contacting Magellan ....................................................................................25

6

Basemaps vs. Detailed Maps

Basemap

A basemap contains major map features like highways, railroads, cities, etc.

Magellan mapping GPS receivers have a built-in basemap. Basemaps have

sufficient detail for orienting oneself to a broad geographic area. The basemap

is displayed at higher zoom levels or when you view a geographic area for

which there is no detailed map.

Detailed Map

Detailed maps contain more map features and more specialized information

than basemaps. Detailed maps are useful when you want to work with smaller

regions, close-up. There are a wide variety of optional MapSend detailed

products available, including street maps, topographic maps, and marine

charts. Depending on locale, there are a variety of MapSend detailed map

products available. MapSend DirectRoute Europe provides detailed streets,

highways, and points of interest for France, Germany, Austria, and Switzerland.

Detailed maps and basemaps work together to provide a useful map view at

any zoom level. Uploading a detail map does not erase the built-in basemap in

the GPS receiver.

You can define and save many detailed map regions in MapSend on the PC. If

you have a SporTrak receiver, you can connect it to the PC and upload any saved

map to the receiver’s memory. If you have a Meridian with an SD card inserted,

you can connect it to the PC and upload to the card in the unit, or you can use

an SD card reader/writer to upload the map directly to the SD card.

7

The unit switches automatically to a detailed map when a detailed map covers

the majority of the displayed area,- and the zoom scale is 0.40 (700 meters)

miles or closer. The detail map can be set to start appearing at higher or lower

zoom levels on the unit by pressing the Menu key, choosing Map Setup, and

choosing a different Detail setting.

System Requirements

• Microsoft® Windows® 95, 98, 2000, XP, ME, NT 4.0 or higher

• Pentium 300 MHz or better

• 64 MB RAM or more

• 300 MB hard disk space or more

• VGA video card

Additionally Required

• Magellan Secure Digital (SD) card (if GPS takes SD card)

Supported Magellan GPS Receivers

MapSend DirectRoute will only work with this current line of Magellan GPS

Receivers: SporTrak Color, Pro, and Pro Marine; Meridian Color, Platinum,

Gold, and Marine. Meridian series GPS receivers require an SD card.

8

Installation

1. With your computer on and all applications closed, insert the Installation

CD-ROM into your CD-ROM drive.

2. The installation application should begin automatically. Just follow the

on-screen instructions to complete the installation. If installation does not

start automatically, open Windows® Explorer, browse to your CD-ROM

Drive, click on the “Setup” file, and proceed.

3. After the installation is complete, you can start MapSend by clicking on

the Windows Start button, click Programs, Magellan, MapSend

DirectRoute, or if Windows is set to Auto run CD applications, just insert

the MapSend Data CD-ROM.

4. When MapSend DirectRoute begins, it will ask that you check the

software version you are using in your GPS receiver. Onscreen instructions

are provided to help you find the software version. Early versions of

Magellan software may not be compatible with MapSend DirectRoute.

The firmware update CD-ROM included with MapSend DirectRoute is

provided in case the version of software you presently have installed is not

compatible. Instructions for updating your receiver’s software can be

found on the firmware update CD-ROM.

NOTE: YOU MUST HAVE THE MAPSEND MAP DATA CD IN THE

CD DRIVE IN ORDER TO USE MAPSEND.

NOTE: PLEASE EXIT FROM ANY HOT SYNC PROGRAMS YOU MAY

HAVE FOR YOUR PDA, CELLPHONE, ETC., WHENEVER YOU

WANT TO CONNECT MAPSEND TO THE GPS.

9

Using MapSend DirectRoute on the PC

Toolbar

Map Window

Data Window

Overview Map

10

Toolbar

The toolbar is located under the menu bar at the top of the MapSend Window.

To hide or display the Toolbar, select “Toolbar” from the View menu.

Search By Address

Draw New Region

Cut Region

Manage Street Route

Place Waypoints

Build Route

Upload Regions

About

What’s This

Overview Scale Mode

Load From File

Print Map

Print Preview

Zoom In

Zoom Out

Map Scale

Pan

Locate

Measure Distance

Search By Name

11

Overview Map

The Overview Map window gives a

more global view of the map. Clicking

in the Overview Map re-centers the

Map Window.

Map Window

The Map Window displays the

contents of the Overview Map’s detail

frame.

12

Data Window

The data window presents information related to the

map. There are several data window views, depen-

dent on what you are trying to do in MapSend.

•Saved Regions - lists regions of the map that you

define and name.

•Street Route Management – helps you define

and manage street routes

•Navigation – this window is used if you want to

use the PC to do Guidance and have your GPS

receiver attached to the PC.

Defining a Detailed Map Area in MapSend on the PC

1. Insert the MapSend Data CD in the drive. Start MapSend DirectRoute.

2. Use the Pan and Zoom tools to view the area of the map to be used.

3. Use the Draw New Region tool to outline the specific area you want

to use as a detail map.

4. Click the Cut Region tool . Type a name for the region.

5. The new region is added to the Saved Regions List. You can create and

save many map region definitions on the PC. You can only upload one

map at a time to your Magellan GPS receiver.

13

Panning Mode

From the Tools menu choose Pan, or click the Pan tool on the toolbar.

Click and drag the map to the desired location.

Zooming Mode

To enlarge an area on the map, select the Zoom In tool on the toolbar. You

can simply click on the location in the map you want to enlarge, or you can

click and drag a rectangle over an area and that area will show in the Map

Window. The Zoom Out tool works similarly.

Uploading a Detailed Map to the GPS Receiver

Saved regions in MapSend can be converted to map images and uploaded for

use on the GPS receiver.

If your receiver uses SD cards, you can either upload to the card installed in the

unit, or use an SD card reader/writer. An SD card reader/writer can upload

large files much faster than uploading through the unit. If you use an SD card,

please give it plenty of time to finish writing the file.

Magellan SporTrak models don’t use SD cards, so in that case you must attach

the receiver, and the detail map is uploaded to the receiver’s internal memory.

If you upload a map directly to the internal memory of a SporTrak or to a card

in the Meridian, it will overwrite the map previously stored directly to the

receiver.

14

MapSend DirectRoute is licensed for use with one GPS receiver. When you

upload a map you must assign the receiver’s serial number. There are two ways

to do this-

1. Connect the GPS receiver to the PC. MapSend will automatically read the

serial number from your GPS receiver. You can use this method whether

or not you are using an SD card reader/writer.

2. You can type in the serial number manually. To find the serial number,

power on the receiver. Press the ENTER key to accept the conditions.

Press the MENU key. Select About from the list and press ENTER. The

serial number is displayed just below the software version number. Note:

The serial number requested by MapSend is internal to the GPS receiver

and is not the same as the serial number printed in the battery compart-

ment.

For convenience, you may note the serial number here: _________________

If you are uploading to a SD card in a GPS receiver or directly to a GPS

receiver’s memory, use fresh batteries in the receiver or use external power.

1. Click the checkbox for the map you wish to upload in the Saved Regions

List (see picture).

You may choose not to upload POI information by clicking on the “P.”

15

2. Click the Upload Regions button on the toolbar.

3. Choose where you want to send the map. Note: Sending the map to the

hard drive is useful if you wish to frequently switch maps on the unit.

This option processes the map image and stores it, so next time you

upload it you can skip the processing wait.

4. The first time you upload a map, MapSend asks you to connect your GPS

receiver to the computer’s serial port, so it can auto-detect the port and

determine the baud rate. If MapSend has problems detecting the port, use

the GPS receiver MENU options to turn off NMEA and Set Baud Rate to

4800. Make sure any hot sync programs (e.g. PDA, cell phone, etc.) on

your PC are turned off.

5. Next step is to either auto-detect or manually input the unit serial

number.

6. MapSend will help you make sure the map will fit on the storage device.

This may involve a couple of steps to reach an acceptable map size. Once

you have an acceptable map, Click Finish to proceed.

7. The map data is then converted and loaded to the target receiver or

storage device.

Using Street Routing and Guidance in MapSend

DirectRoute routing and guidance is primarily designed for use on the

handheld, but it is possible to create street routes in DirectRoute on the PC.

16

The next two subsections describe routing and guidance on the PC. You may

want to first read the next major section, Using MapSend DirectRoute on the

GPS Receiver, before reading the following.

Defining a Street Route on the PC

Start by selecting Route Management from the Menu Bar, or Press F7 on the

keyboard, or click on the Street Route Management tool on the Toolbar.

The Street Route Management window will be displayed on the right side of

the DirectRoute Window. The cursor will turn into a green flag. Click on the

start of the route. The cursor will turn into a red flag. Click on the route

destination. You may need to use the keyboard arrow keys to pan the map view

to the destination. With the destination marked, choose whether you want to

make a Street Route or Point-to-Point route. If you select Street Route, the

route will be highlighted on the map and it will become active. In MapSend on

the PC, you will have to connect your unit if you want to use the PC for

guidance. When it’s connected, press the Navigate key in the Street Routes

Sidebar.

Guidance on the PC

Guidance on the PC proceeds much as it does on the handheld. If you press the

Navigate key while a street route is active, you can choose whether to proceed

with the street route or change it to a Point-to-Point route. You can exit street

routing by exiting the Street Routing window. As on the handheld, only one

street route can be active at a time, and once routing is stopped, the street route

disappears. On the PC you can use the Convert Route key to convert a Street

Route to a multi-leg waypoint route and save it that way in the routes list.

17

Using DirectRoute on the GPS Receiver

Viewing the Detailed Map

There are two ways to quickly view a DirectRoute map on the handheld.

1. Press the NAV or ESC key until you reach the Map screen. Use the cursor

key and the Zoom keys to find the general area of the detailed map. You

will see a rectangle indicating the area of the detailed map. Zoom in to at

least a scale of 0.40 mi. (700 m) to view the detailed map.

2. Press the Menu key and select “Database”. Select the detailed map, by its

name, from the list of options. Now you can search POIs in the detailed

map. Find a POI you want to see, press VIEW, and the POI in the

detailed map will appear.

About Street Routing and Guidance

DirectRoute is the first MapSend product with the ability to automatically

calculate a street route and use it for turn-by-turn guidance. DirectRoute

calculates shortest time street routes. Shortest time street route calculation

considers the speed limits and length of possible street paths between you and

your destination. The shortest time route is not necessarily the fastest or

simplest route. DirectRoute is tuned to provide reasonable street routes, but it

doesn’t know about traffic, road construction, etc.

DirectRoute also maintains the ability to manually set up simple, straight-line point-

to-point routes and multi-leg Waypoint Routes, similar to other Magellan MapSend

products. This Quick Start guide focuses on street routing. There is more informa-

tion about straight-line routing in the User Manual for your GPS receiver.

18

Each time you create a street route on the GPS receiver it becomes activated

and ready to start guidance as soon as it is calculated. Only one street route can

be active. A street route stays active until you deactivate it or you reach your

destination– even if you power off and power up the unit. If you get off-

course, you can easily re-route to the current destination from your current

location by pressing the GOTO key and pressing it again at the Street Route

window. DirectRoute also keeps a list of the last 10 POI and address

destinations used, so if you stop routing but later want to route to that

destination again, it’s easy.

Street routes cannot be saved as such. However, you can make a street route

from a saved point-to-point route, if the start and end points are within the

active detail map. If you want to do this, DirectRoute uses only the start and

end points of the waypoint route, and it calculates and activates the shortest-

time street route. You can also convert previous destination points to user

waypoints, and route to them whenever you wish.

Routing with the GOTO Key

The GOTO key on the handheld is the focal point of street routing. Use it to

create a street route between your current location and a destination you

specify. There are three ways to define a destination :

• Move the map cursor to the destination

• Type in an address for the destination

• Select a point of interest category or a saved waypoint

• Pick from the last ten previous destinations

La pagina sta caricando ...

Magellan Mapsend Direct Route - GPS Map Guida Rapida

Questo manuale è adatto anche per

Magellan Mapsend Direct Route - GPS Map Guida Rapida

in altre lingue

Documenti correlati

Altri documenti