ESAB Tig 1500i, Tig 2200i, Caddy® Tig 1500i, Caddy® Tig 2200i Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente

Questo manuale è adatto anche per

Valid for serial no. 803--xxx--xxxx0460 443 027 080129
Caddy t
Tig 1500i/2200i
Instruction manual Èíñòðóêöèÿ ïî ýêñïëóàòàöèè
-- 2 --
Rights reserved to alter specifications without notice.
Îñòàâëÿåì çà ñîáîé ïðàâî èçìåíÿòü ñïåöèôèêàöèþ áåç ïðåäóïðåæäåíèÿ.
Ðóññêèé 3...............................................
ENGLISH 14..............................................
Ðóññêèé
TOCr
-- 3 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ 4........................................
2 ÂÂÅÄÅÍÈÅ 6.......................................................
2.1 Îáîðóäîâàíèå 6...........................................................
2.2 Ïàíåëè óïðàâëåíèÿ 6......................................................
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ 7................................
ÑÒÀÍÎÂÊÀ 8.......................................................
4.1 Ðàñïîëîæåíèå 8...........................................................
4.2 Ñåòü ýëåêòðîïèòàíèÿ 8.....................................................
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ 9...............................................
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ 9.....................................
5.2 Óñëîâíûå îáîçíà÷åíèÿ 10...................................................
5.3 Ïîäâîä âîäû 10.............................................................
5.4 Ñâàðêà ìåòîäîì TIG 10.....................................................
5.5 Ñâàðêà ìåòîäîì MMA 10....................................................
5.6 Çàùèòà îò ïåðåãðåâà 11.....................................................
5.7 Ïîäñîåäèíåíèå ê îõëàæäàþùåìó óñòðîéñòâó
(òîëüêî äëÿ Caddyt Tig 2200i) 11..............................................
5.8 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ 11............................................
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ 12.................................
6.1 Ïðîâåðêà è ÷èñòêà 12.......................................................
7 ÏÎÈÑÊ È ÓÑÒÐÀÍÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ 12.......................
8 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ 13.......................................
9 ÄÅÌÎÍÒÀÆ È ÓÒÈËÈÇÀÖÈß 13......................................
ÑÕÅÌÀ 24..............................................................
ÍÎÌÅÐ ÇÀÊÀÇÀ 30.....................................................
ÄÎÏÎËÍÈÒÅËÜÍÛÅ ÏÐÈÍÀÄËÅÆÍÎÑÒÈ 31...........................
bt34d1ra -- 4 --
1 ÒÅÕÍÈÊÀ ÁÅÇÎÏÀÑÍÎÑÒÈ
Ïîëüçîâàòåëè ñâàðî÷íîãî îáîðóäîâàíèÿ ESAB îòâå÷àþò çà âûïîëíåíèå ïðàâèë òåõíèê è
áåçîïàñíîñòè ëèöàìè, ðàáîòàþùèìè íà îáîðóäîâàíèè è ðÿäîì ñ íèì. Ïðàâèëà òåõíèêè
áåçîïàñíîñòè äîëæíû îòâå÷àòü òðåáîâàíèÿì ê áåçîïàñíîé ýêñïëóàòàöèè ñâàðî÷íîãî
îáîðóäîâàíèÿ ýòîãî òèïà. Ïîìèìî ñòàíäàðòíûõ ïðàâèë òåõíèêè áåçîïàñíîñòè è îõðàíû
òðóäà íà ðàá î÷åì ìåñòå ðåêîìåíäóåòñÿ ñëåäóþùåå.
Âñå ðàáîòû äîëæíû âûïîëíÿòüñÿ ïîäãîòîâëåííûìè ëèöàìè, çíàêîìûìè ñ ýêñïëóàòàöèåé
ñâàðî÷íîãî îáîðóäîâàíèÿ. Íåïðàâèëüíàÿ ýêñïëóàòàöèÿ îáîðóäîâàíèÿ ìîæåò âûçâàòü
îïàñíûì ñèòóàöèè, ïðèâîäÿùèå ê òðàâìèðîâàíèþ ïåðñîíàëà è ïîâðåæäåíèþ
îáîðóäîâàíèÿ.
1. Bñå ëèöà, èñïîëüçóþùèå ñâàðî÷íîå îáîðóäîâàíèå, äîëæíû çíàòü:
S èíñòðóêöèè ïî ýêñïëóàòàöèè
S ðàñïîëîæåíèå îðãàíîâ àâàðèéíîãî îñòàíîâà
S íàçíà÷åíèå îáîðóäîâàíèÿ
S ïðàâèëà òåõíèêè áåçîïàñíîñòè
S òåõíîëîãèþ ñâàðêè
2. Îïåðàòîð îáåñïå÷èâàåò:
S óäà ëåíèå ïîñòîðîííèõ ëèö èç ðàá î÷åé çîíû îáîðóäîâàíèÿ ïðè åãî çàïóñêå
S çàùèòó âñåõ ëèö îò â îçäåéñòâèÿ ñâàðî÷íîé äóãè
3. Ðàáî÷åå ìåñòî äîëæíî:
S îòâå÷àòü óñëîâèÿì ýêñïëóàòàöèè
S íå èìåòü ñêâîçíÿêîâ
4. Ñðåäñòâà çàùèòû ïåðñîíàëà
S Âî âñåõ ñëó÷àÿõ ðåêîìåíäóåòñÿ èñïîëüçîâàòü èíäèâèäóàëüíûå ñðåäñòâà çàùèòû,
íàïðèìåð, çàùèòíûå î÷êè, îãíåñòîéêóþ ñïåöîäåæäó è çàùèòíûå ðóêàâèöû.
S Ïðè ñâàðêå çàïðåùàåòñÿ íîñèòü ñâîáîäíóþ îäåæäó, óêðàøåíèÿ è ò.ä., íàïðèìåð,
øàðôû, áðàñëåòû, êîëüöà, êîòîðûå ìîãóò ïîïàñòü â ñâàðî÷íîå îáîðóäîâàíèå èëè
âûçâàò ü îæîãè.
5. Îáùèå ìåðû ïðåäîñòîðîæíîñòè
S Ïðîâåðüòå íàäåæíîñòü ïîäêëþ÷åíèÿ îáðàòíîãî êàáåëÿ.
S Ðàáîòû íà îáîðóäîâàíèè ñ âûñîêèì íàïðÿæåíèåì äîëæíû ïðîèçâîäèòüñÿ
òîëüêî êâàëèôèöèðîâàííûì ýëåêòðèêîì.
S Â ïðåäåëàõ äîñòóïà äîëæíû íàõîäèòüñÿ ñîîòâåòñòâóþùèå ñðåäñòâà
ïîæàðîòóøåíèÿ, èìåþùèå ÿñíóþ ìàðêèðîâêó.
S Çàïðåù àåòñÿ ïðîâîäèòü ñìàçêó è òåõíè÷åñêîå îáñëóæèâàíèå îáîðóäîâàíèå âî
âðåìÿ ýêñïëóàòàöèè.
RU
bt34d1ra -- 5 --
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè âíèìàòåëüíî èçó÷èòå ñîîòâåòñòâóþùèå èíñòðóêöèè.
ÇÀÙÈÒÈÒÅ ÑÅÁß È ÄÐÓÃÈÕ!
ÂÍÈÌÀÍÈÅ!
Äóãoaaÿ caapka è peçka oïacíû kak äëa ècïoëíèteëÿ paáît, tak è äëa ïîctopoííèõëèö. Tpeáyéte
coáëþäåíèå àñå õ ïðààèë áåçîïàñíîñòè, äåéñòàóþùèõ íà îáúåêòå, êîòîðûå äîëæíû ó÷èòûààòú
ñåäåíèÿ îá îïàñíîñòÿõ, ïðåäñòààëåííûå èçãîãàèòåëåì ñààð î÷íîãî îáîðóäîààíèà.
ÎÏÀÑÍÎÑÒÜ ÑÌÅÐÒÅËÜÍÎÃÎ ÏÎÐÀÆÅÍÈß ÝËÅÊÒÐÈ×ÅÑÊÈÌ ÒÎÊÎÌ.
S Ñâàðî÷íûé àãðåãàò óñòàíàâëèâàåòñÿ è çàçåìëÿåòñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íîðìàìè è
ïðàâèëàìè.
S Íå äîïóñêàéòå êîíòàêòà íàõîäÿùèõñÿ ïîä íàïðÿæåíèåì äåòàëåé è ýëåêòðîäîâ ñ íåçàùèùåííûìè
÷àñòÿìèòåëàîêðûìèðóêàâèöàìèèìîêðîéîäåæäîé.
S Îáåñïå÷üòå ýëåêòðè÷åñêóþ èçîëÿöèþ îò çåìëè è ñâàðèâàåìûõ äåòàëåé.
S Îáåñïå÷üòå ñîáëþäåíèå áåçîïàñíûõ ðàáî÷èõ ðàññòîÿíèé.
ÄÛÌÛ È ÃÀÇÛ ìîãóò áûòü îïàñíû äëÿ ÷åëîâåêà
S Èñêëþ÷èòå âîçìî æíîñòü âîçäåéñòâèÿ äûìîâ.
S Äëÿ èñêëþ÷åíèÿ âäûõàíèÿ äûìîâ âî âðåìÿ ñâàðêè îðãàíèçóåòñÿ îáùàÿ âåíòèëÿöèÿ ïîìåùåíèÿ, à
òàêæåâûòÿæíàÿâåíòèëÿöèÿèççîíûñâàðêè.
ÈÇËÓ×ÅÍÈÅ ÄÓÃÈ âûçûâàåò ïîðàæåíèå ãëàç è îæîãè êîæè.
S Çàùèòèòå ãëàçà è êîæó. Äëÿ ýò îãî èñïîëüçóéòå çàùèòíûå ùèòêè, öâåòíûå ëèíçû è çàùèòíóþ
ñïåöîäåæäó.
S Äëÿ çàùèòû ïîñòîðîííèõ ëèö ïðèìåíÿþòñÿ çàùèòíûå ýêðàíû èëè çàíàâåñè.
ÏÎÆÀÐÎÎÏÀÑÍÎÑÒÜ
S Èñêðû (áðûçãè ìåòàëëà) ìîãóò âûçâàòü ïîæàð. Óáåäèòåñü â îòñóòñòâèè ãîðþ÷èõ ìàòåðèàëîâ
ïîáëèçîñòè îò ìåñòà ñâàðêè.
ØÓÌ - ×ðåçìåðíûé øóì ìîæåò ïðèâåñòè ê ïîâðåæäåíèþ îðãàíîâ ñëóõà
S Ïðèìèòå ìåðû äëÿ çàùèòû ñëóõà. Èñïîëüçóéòå çàòû÷êè äëÿ óøåé èëè äðóãèå ñðåäñòâà çàùèòû
ñëóõà.
S Ïðåäóïðåäèòå ïîñòîðîííèõ ëèö îá îïàñíîñòè.
ÍÅÈÑÏÐÀÂÍÎÑÒÈ -- Ïðè íåèñïðàâíîñòè îáðàòèòåñ ü ê ñïåöèàëèñòàì ïî ñâàðî÷íîìó
îáîðóäîâàíèþ
Êîìïàíèÿ ESAB ãîòîâà ïðåäîñòàâèòü âàì âñå çàùèòíîå ñíàðÿæåíèå è
ïðèíàäëåæíîñòè, íå îáõîäèìûå äëÿ âûïîëíåíèÿ ñâàðî÷íûõ ð àáîò.
ÂÍÈÌÀÍÈÅ!
Çàïðåùàåòñÿ èñïîëüçîâàòü èñòî÷íèê ïèòàíèÿ äëÿ îòòàèâàíèÿ òðóá.
ÎÑÒÎÐÎÆÍÎ!
Ïåðåä íà÷àëîì ìîíòàæà è ýêñïëóàòàöèè
âíèìàòåëüíî è çó÷èòå ñîîòâåòñòâóþùèå
èíñòðóêöèè.
ÎÑÒÎÐÎÆÍÎ!
Äàííîå èçäåëèå ïðåäíàçíà÷åíî òîëüêî äëÿ äóãîâîé ñâàðêè.
RU
bt34d1ra -- 6 --
ÎÑÒÎÐÎÆÍÎ!
Îáîðóäîâàíèå Class À íå ïðåäíàçíà÷å íî äëÿ èñïîëüçîâàíèÿ â
æèëûõ ïîìåùåíèÿõ, ãäå ýëåêòðîñíàáæåíèå îñóùåñòâëÿåòñÿ èç
áûòîâûõ ñåòåé íèçêîãî íàïðÿæåíèÿ. Â òàêèõ ìåñòàõ ìîãóò
ïîÿâèòüñÿ ïîòåíöèàëüíûå òðó äíîñòè îáåñïå÷åíèå
ýëåêòðîìàãíèòíîé ñîâìåñòèìîñòè îáîðóäîâàíèÿ Class À
âñëåäñòâèå êîíäóêòèâíûõ è ðàäèàöèîííûõ ïîìåõ.
2 ÂÂÅÄÅÍÈÅ
Tig 1500i / 2200i ïðåäñòàâëÿåò ñîáîé èñòî÷íèê ïèòàíèÿ äëÿ äóãîâîé ñâàðêè
âîëüôðàìîâûì ýëåêòðîäîì â çàùèòíîì ãàçå (TIG), êîòîðûé ìîæíî òàêæå
èñïîëüçîâàòü äëÿ ðó÷íîé äóãîâîé ñâàðêè ìåòàëëè÷åñêèì ïëàâÿùèìñÿ
ýëåêòðîäîì (MMA). Ìîæåò ýêñïëóàòèðîâàòüñÿ ñ ïîñòîÿííûì òîêîì (DC).
Àêñåññóàð² îò ä ëÿ èçäåëÿ ìîæíî íàéòè íà ñòðíèöå 31.
2.1 Îáîðóäîâàíèå
Èñòî÷íèê ïèòàíèÿ ïîñòàâëÿåòñÿ ñ 3-ìåòðîâûì ñâàðî÷íûì êàáåëåì ñ ãîðåëêîé
TIG,
3-ìåòðîâûì îáðàòíûì êàáåëåì, 3-ìåòðîâûì ñåòåâûì êàáåëåì, èíñòðóêöèåé
ïî ýêñïëóàòàöèè ê èñòî÷íèêó ïèòàíèÿ è ïàíåëè óïðàâëåíèÿ, ñì. èíôîðìàöèþ
äëÿ çàêàçà íà ñòð. 30.
2.2 Ïàíåëè óïðàâëåíèÿ
S TA33 S TA34
Ïîäðîáíîå îïèñàíèå ïàíåëåé óïðàâëåíèÿ ïðèâåäåíî â îòäåëüíîì
ðóêîâîäñòâå.
RU
bt34d1ra -- 7 --
3 ÒÅÕÍÈ×ÅÑÊÈÅ ÕÀÐÀÊÒÅÐÈÑÒÈÊÈ
Tig 1500i Tig 2200i/2200iw
Íàïðÿæåíèå ñåòè
230 Â, ±10%, 1 50 Ãö 230 Â, ±10%, 1 50 Ãö
Òîê â ïåðâè÷íîé îáìîòêå
I
ìàêñ.
TIG
I
ìàêñ.
MMA
13,8 A
21,3 A
24,1 A
24,9 A
Ïèòàíèå îò ñåòè Z
ìàêñ
0,35 Îì Z
ìàêñ
0,30 Îì
Íàïðÿæåíèå õîëîñòîãî õîäà 30 Âò 30 Âò
Äèàïàçîí óñòàâîê
TIG
MMA
3-150 À
4-150 À
3-220 À
4-170 À
Äîïóñòèìàÿ íàãðóçêà ïðè ñâàðêå
TIG
Ê îýôôèöèåíò íàãðóçêè 20%
Ê îýôôèöèåíò íàãðóçêè 25%
Ê îýôôèöèåíò íàãðóçêè 60%
Ê îýôôèöèåíò íàãðóçêè 100%
150À/16,
120À/14,
110À/14,
220 A / 18,8 Â
150À/16,
110À/14,
Äîïóñòèìàÿ íàãðóçêà ïðè ñâàðêå
MMA
Ê îýôôèöèåíò íàãðóçêè 30%
Ê îýôôèöèåíò íàãðóçêè 60%
Ê îýôôèöèåíò íàãðóçêè 100%
150À/26,
100À/24,
90 À / 23,6 Â
17/26,
130À/25,
110À/24,
Êîýôôèöèåíò ìîùíîñòè ïðè
ìàêñèìàëüíîì òîêå
TIG
MMA
0,99
0,99
0,99
0,99
Êïä ïðè ìàêñèìàëüíîì òîêå
TIG
MMA
76%
80%
78%
81%
Íàïðÿæåíèå õîëîñòîãî õîäà MMA 72 Â 72 Â
Ðàáî÷àÿ òåìïåðàòóðà îò -10 äî 40˚C îò -10 äî 40˚C
Òåìïåðàòóðà ïðè
òðàíñïîðòèðîâêå
îò -20 äî +55˚C îò -20 äî +55˚C
Ïîñòîÿííûé óðîâåíü çâóêîâîãî
äàâëåíèÿ íà õîëîñòîì õîäó
<70 äÁ (A) <70 äÁ (A)
Ãàáàðèòû,ÄxØx 418 x 188 x 208 ìì 418 x 188 x 208 ìì
âê ëþ÷àÿ îõëàæäàþùåå óñòðîéñòâî 418 x 188 x 345 ìì 418 x 188 x 345 ìì
Ìàññà
Îõëàæäàþùåå óñòðîéñòâî ñ/áåç
îõëàæäàþùåé âîäîé
9,2 êã
-
9,4 êã
4,5 / 6,7 êã
Çàùèòíûé ãàç
ìàêñ. äàâëåíèå
Âñå òèïû,
ïðåäíàçíà÷åííûå äëÿ
ñâàðêè TIG
àð
Âñå òèïû,
ïðåäíàçíà÷åííûå äëÿ
ñâàðêè TIG
àð
Ê ëàññ èçîëÿöèè òðàíñôîðìàòîðà H H
Ê ëàññ çàùèòû IP 23 IP 23
Êëàññ ïðèìåíåíèÿ
Ðàáî÷èé öèêë
Ðàáî÷èé öèêë ïðåäñòàâëÿåò ñîáîé äîëþ %%) äåñÿòèìèíóòíîãî èíòåðâàëà, â òå÷åíèå
êîòîðîé ìîæíî ïðîèçâîäèòü ñâàðêó ïðè îïðåäåëåííîé íàãðóçêå áåç ïåðåãðóçêè.
RU
bt34d1ra -- 8 --
Ðàáî÷èéöèêëóêàçàíäëÿòåìïåðàòóðûîêðóæàþùåéñðåäû40˚C.
Êëàññ êîæóõà
Íîðìû IP óêàçûâàþò êëàññ êîæóõà, ò.å., ñòåïåíü çàùèòû îò ïðîíèêíîâåíèÿ òâåðäûõ
îáúåêòîâ è âîäû. Îáîðóäîâàíèå ñ ìàðêèðîâêîé IP 23 ïðåäíàçíà÷åíî äëÿ íàðóæíîé è
âíóòðåííåé óñòàíîâêè.
Ê ëàññ çîíû óñòàíîâêè
Ýòîò ñèìâîë îçíà÷àåò, ÷òî èñòî÷íèê ïèòàíèÿ ïðåäíàçíà÷åí äëÿ èñïîëüçîâàíèÿ â çîíàõ
ñ ïîâûøåííîé îïàñíîñòüþ ïîðàæåíèÿ ýëåêòðî òîê îì.
Ïèòàíèå îò ñåòè, Z
ìàêñ.
Ìàêñèìàëüíî äîïóñòèìîå ñîïðàòèâëåíèå ñåòè â ñîîòâåòñòâèè ñî ñòàíäàðòîì IEC
61000-3-11.
ÑÒÀÍÎÂÊÀ
Ââîä â ýêñïëóàòàöèþ äîëæåí ïðîèçâîäèòüñÿ êâàëèôèöèðîâàííûì
ñïåöèàëèñòîì.
Ïðèìe÷aíèå!
Òðåáîâàíèÿ ê ñåòÿì ýëåêòðîñíàáæåíèÿ
Èç-çà áîëüøèõ âåëè÷èí òîêà â ïåðâè÷íîé îáìîòêå îáîðóäîâàíèå âûñîêîé ìîùíîñòè
ìîæåò ñóùåñòâåííî ïîâëèÿòü íà ìîùíîñòíûå õàðàêòåðèñòèêè ñåòè. Ïîýòîìó â îòíîøåíèè
íåêîòîðîãî îáîðóäîâàíèÿ ïðèìåíÿþòñÿ îãðàíè÷åíèÿ èëè äîïîëíèòåëüíûå òðåá îâàíèÿ,
êàñàþùèåñÿ ìàêñèìàëüíî äîïóñòèìîãî ñîïðîòèâëåíèÿ îáîðóäîâàíèÿ èëè ì èíèìàëüíîé
ñïîñîáíîñòè îáåñïå÷èòü ñòàáèëüíîå ýíåðãîñíàáæåíèå â òî÷êàõ âçàèìîäåéñòâèÿ
îáùåñòâåííûõ ñåòåé.  òàêîì ñëó÷àå ïîëüçîâàòåëü îáîðóäîâàíèÿ èëè òîò, êòî åãî
óñòàíàâëèâàåò, äîëæåí ïðîêîíñóëüòèðîâàòüñÿ ñ îïåðàòîðîì ýíåðãîñåòè ïî ïîâîäó
âîçìî æíîñòè ïîäêëþ÷åíèÿ òàêîãî ðîäà îáîðóäîâàíèÿ.
4.1 Ðàñïîëîæåíèå
Ðàçìåñòèòå èñòî÷íèê ñâàðî÷íîãî òîêà òàêèì îáðàçîì, ÷òîáû èìåþùèåñÿ â
íåì î òâåðñòèÿ äëÿ ïîäâîäà è îòâîäà îõëàæäàþùåãî âîçäóõà íå áûëè
çàãðàæäåíû.
4.2 Ñåòü ýëåêòðîïèòàíèÿ
Óáåäèò åñü â òîì, ÷ò î áëîê ïîäêëþ÷åí ê ñåòè
ýëåêòðîïèòàíèÿ ñ òðåáóåìûì íàïðÿæåíèåì è
çàùèùåí ïðåäîõðàíèòåëÿìè òðåáóåìîãî íîìèíàëà.
Íåîáõîäèìî îáåñïå÷èòü çàùèòíîå çàçåìëåíèå â
ñîîòâå òñòâèè ñ äåéñòâóþùèìè íîðìàìè.
Ïàñïîðòíàÿ òàáëè÷êà ñ ïàðàìåòðàìè ñåòè ýëåêòðîïèòàíèÿ
RU
bt34d1ra -- 9 --
Ðåêîìåíäóåìûå íîìèíà ëû ïðåäîõðàíèòå ëåé è ìèíèìàëüíûå ñå÷åíèÿ
êàáåëåé
Tig 1500i Tig 2200i/2200iw
TIG MMA TIG MMA
Íàïðÿæåíèå ñåòè
230 Â ¦10%,
1μ
230 Â ¦10%,
1μ
230 Â ¦10%,
1μ
230 Â ¦10%,
1μ
×àñòîòà ñåòè ïèòàíèÿ 50/60 Ãö 50/60 Ãö 50/60 Ãö 50/60 Ãö
Ïëîùà äü ïîïåðå÷íîãî
ñå÷åíèÿ ñèëîâîãî êàáåëÿ
ïèòàíèÿ, ìì
2
3G2.5 3G2.5 3G2.5 3G2.5
Ôàçíûé òîê, I
ýôô.
9,1 A 11 , 5 A 11 , 5 A 13,4 A
Ïðåäîõðàíèòåëü
óñòîé÷èâûé ê
ïåðåíàïðÿæåíèÿì
òèï C MCB
16 A
13 A
16 A
13 A
16 A
16 A
16 A
16 A
ÂÍÈÌÀÍÈÅ!Ïðèâåäåííûå âûøå çíà÷åíèÿ ïëîùàäè ïîïåðå÷íîãî ñå÷åíèÿ ñèëîâûõ êàáåëåé
è íîìèíàëû ïðåäîõðàíèòåëåé ñîîòâåòñòâóþò íîðìàì Øâåöèè. Ýêñïëóàòàöèÿ èñòî÷íèêà
ñâàðî÷íîãî òîêà äîëæíà îñóùåñòâëÿòüñÿ â ñîîòâåòñòâèè ñ äåéñòâóþùèìè íàöèîíàëüíûìè
íîðìàòèâíûìè äîêóìåíòàìè.
5 ÏÎÐßÄÎÊ ÐÀÁÎÒÛ
Îáùèå ïðàâèëà òåõíèêè áåçîïàñíîñòè ïðè ðàáîòå ñ îáîðóäîâàíèåì
ïðèâîäÿòñÿ íà ñòð. 4. Ïðî÷òèòå èõ äî èñïîëüçîâàíèÿ îáîðóäîâàíèÿ!
5.1 Ñîåäèíåíèÿ è óñòðîéñòâà óïðàâëåíèÿ
1 Ñîåäèíèòåëü (+) äëÿ îáðàòíîãî êàáåëÿ
TIG.
MMA: äëÿ îáðàòíîãî èëè ñâàðî÷íîãî
êàáåëåé.
7 Ñåòåâîé âûêëþ÷àòåëü
2 Ñîåäèíèòåëü à äàïòåðà ïóëüòà
äèñòàíöèîííîãî óïðàâëåíèÿ
8 Ñåòåâîé êàáåëü
3 Ïàíåëü óïðàâëåíèÿ (ñì. îòäåëüíîå
ðóêîâîäñòâî ïî ýêñïëóàòàöèè)
9 Øòóöåð ä ëÿ çàùèòíîãî ãàçà
4 Ñîåäèíåíèå äëÿ ãîðåëêè TIG 10 Ñîåäèíèòåëü ÑÈÍÈÉ, ñ ñèñòåìîé ELP*,
äëÿ ïîäà÷è îõëàæäàþùåé æèäêîñòè îò
îõëàæäàþùåãî óñòðîéñòâà
5 Ñîåäèíèòåëü äëÿ ïîäà÷è ãàçà ê
ñâàðî÷íîé ãîðåëêå TIG
11 Ïîäñîåäèíåíèå îõëàæäàþùåé âîäû ê
óñòðîéñòâó îõëàæäåíèÿ (ÊÐÀÑÍÎÅ)
6 Ñîåäèíåíèå (-) äëÿ ãîðåëêè TIG
MMA : îáðàòíûé èëè ñâàðî÷íûé êàáåëü
12 Çàïðàâêà î õëàæäàþùåé âîäîé
* Íàñîñ ESAB ñ ëîãè÷åñêèì óïðàâëåíèåì, ñì. ïóíêò 5.3
RU
bt34d1ra -- 1 0 --
5.2 Óñëîâíûå îáîçíà÷åíèÿ
MMA TIG
5.3 Ïîäâîä âîäû
Áëîê îõëàæäåíèÿ îáîðóäîâàí ñèñòåìîé ïðîâåðêè ïîäñîåäèíåíèÿ âîäÿíûõ
øëàíãîâELP (ESAB Logic Pump = Ëîãè÷åñêèé Íàñîñ ESAB). Ïðè ïîäêëþ÷åíèè
ãîðåëêè TIG ñ âîäÿíûì îõëàæäåíèåì çàïóñêàåòñÿ îõëàæäåíèå.
5.4 Ñâàðêà ìåòîäîì TIG
Ïåðåä èñïîëüçîâàíèåì Arc 1500i/2200i äëÿ ñâàðêè ìåòîäîì TIG íåîáõ îäèìî
óáåäèòüñÿ â íàëè÷èè ñëåäóþùèõ ýëåìåíòîâ:
S ãîðåëêà TIG;
S áàëëîí ïîäõîäÿùåãî ãàçà äëÿ ñâàðêè;
S ðåãóëÿòîð ãàçà äëÿ ñâàðêè (ïîäõîäÿùèé ãàçîâûé ðåãóëÿòîð);
S âîëüôðàìîâûå ýëåêòðîäû;
S ïîäõîäÿùèé ïðèñàäî÷íûé ìåòàëë, åñëè íåîáõîäèìî.
5.5 Ñâàðêà ìåòîäîì MMA
Ïðèñîåäèíåíèå ñ âàðî÷íîãî è îáðàòíîãî êàáåëåé
Ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ ñíàáæåí äâóìÿ êëåììàìè, îäíà èç êîòîðûõ èìååò
ïîëîæèòåëüíóþ ïîëÿðíîñòü, äðóãàÿ - îòðèöàòåëüíóþ, ïðåäíàçíà÷åííûìè äëÿ
ïîäê ëþ÷åíèÿ ñâàðî÷íîãî è îáðàòíîãî êàáåëåé. Ïðèñîåäèíèòå ñâàðî÷íûé
êàáåëü ê òîé êëåììå, ïîëÿðíîñòü êîòîðîé ñîîòâåòñòâóåò ïîëÿðíîñòè, óêàçàííîé
íà óïàêîâê å ñ èñïîëüçóåìûìè ýëåêòðîäàìè.
RU
bt34d1ra -- 1 1 --
Ïðèñîåäèíèòå îáðàòíûé êàáåëü ê äðóãîé êëåììå. Çàêðåïèòå çàæèì çàçåìëåíèÿ
îáðà òíîãî êàáåëÿ íà äåòàëè è óáåäèòåñü, ÷òî ìåæäó äåòàëüþ è êëåììîé
îáðàòíîãî êàáåëÿ íà ñâàðî÷íîì èñòî÷íèêå ïèòàíèÿ åñòü õîðîøèé êîíòàêò.
5.6 Çàùèòà îò ïåð åãðåâà
Èñòî÷íèê ïèòàíèÿ èìååò óñòðîéñòâî çàùèòû îò ïåðåãðåâà, ñðàáàòûâàþùåå,
êîãäà âíó òðåííÿÿ òåìïåðàò óðà ñòàíîâèòñÿ ñëèøêîì âûñîêîé. Ïðè ýòîì íà
ïàíåëè îòîáðàæàåòñÿ êîä íåèñïðàâíîñòè. Êîãäà òåìïåðàò óðà ñíèçèòñÿ, ðåëå
âíîâü àâòîìàòè÷åñêè âêëþ÷àòñÿ.
5.7 Ïîäñîåäèíåíèå ê îõëàæäàþùåìó óñòðîéñòâó
(òîëüêî äëÿ Caddyt Tig 2200i)
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ð åìîíò
ñâàðî÷íîãî îáîð óäîâàíèå, ñâÿçàííûå ñî ñíÿòèåì
çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè,
ïðîøåäøèìè ñîîòâåòñòâóþùóþ
ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè
íà ïðàâî âûïîëíåíèÿ òàêèõ ðàáîò.
Ñì. èíñòðóêöèþ ïî óñòàíîâêå îõëàæäàþùåãî
óñòðîéñòâà.
5.8 Âêëþ÷åíèå èñòî÷íèêà ïèòàíèÿ
Âêëþ÷èòå ïèòàíèå, ïîâåðíóâ âûêëþ÷àòåëü ïèòàíèÿ â ïîëîæåíèå «1».
Äëÿ âûêëþ÷åíèÿ èñòî÷íèêà ïèòàíèÿ ïîâåðíèòå âûêëþ÷àòåëü â ïîëîæåíèå “0”.
Ïîñëå øòàòíîãî îòêëþ÷åíèÿ ñåòåâîãî ïèòàíèÿ èëè áëîêà ïèòàíèÿ ïàðàìåòðû
ñâàðêè âîññòàíàâëèâàþòñÿ ïðè ïîñëåäóþùåì âêëþ÷åíèè áëîêà.
RU
bt34d1ra -- 1 2 --
6 ÒÅÕÍÈ×ÅÑÊÎÅ ÎÁÑËÓÆÈÂÀÍÈÅ
Ðåãóëÿðíîå òåõíè÷åñêîå îáñëóæèâàíèå èìååò âàæíîå çíà÷åíèå äëÿ
îáåñïå÷åíèÿ áåçîïàñíîñòè è íàäåæíîñòè.
Ïîäêëþ÷åíèå, îáñëóæèâàíèå è ðåìîíò ñâàðî÷íîãî îáîðóäîâàíèå, ñâÿçàííûå
ñî ñíÿòèåì çàùèòíûõ ùèòêîâ, âûïîëíÿþòñÿ ëèöàìè, ïðîøåäøèìè
ñîîòâåòñòâóþùóþ ýëåêòðîòåõíè÷åñêóþ ïîäãîòîâêó è àòòåñòîâàííûìè íà ïðàâî
âûïîëíåíèÿ òà êèõ ðàáîò.
Ïðèìå÷àíèå:
à àðàíòìèéíûå îáÿçàòåëüñòâà ïîñòàâùèêà òåðÿþò ñèëó, åñëè ïîêóïàòåëú
ñàìîñòîÿòåëúíî ïûòàåòñÿ ïð îèçâåñòè êàêèå-ëèáî ðàáîòû ïî óñòðàíåíèþ
íåèñïðàâíîñòåé èçäåëèÿ â òå÷åíèå ãàðàíòèéíîãî ñðîêà.
6.1 Ïðîâåðêà è ÷èñòêà
Èñòî÷íèê ïèòàíèÿ
Ðåã óëÿðíî ñëåäèòå çà òåì, ÷òîáû ñâàðî÷íûé èñòî÷íèê ïèòàíèÿ íå áûë çàáèò
ãðÿçüþ.
Ïåðèîäè÷íîñòü ïðîâåðêè è ïðèìåíÿåìûå ìåòîäû î÷èñòêè çàâèñÿò îò:
òåõíîëîãèè ñâàðêè, äëèòåëüíîñòè ãîðåíèÿ äóãè è óñëîâèé îêðóæàþùåé ñðåäû.
Îáû÷íî áûâàåò äîñòàòî÷íî ïðîäóâàòü èñòî÷íèê ïèòàíèÿ ñóõèì ñæàòûì
âîçäóõîì (ïðè ïîíèæåííîì äàâëåíèè) îäèí ðàç â ãîä.
Çàñîðåííûå èëè çàêóïîðåííûå îòâåðñòèÿ äëÿ ïîäâîäà è îòâîäà âîçäóõà òàêæå
ìîãóò ñòàòü ïðè÷èíîé ïåðåãðåâà óñòðîéñòâà.
Ñâàðî÷íàÿ ãîðåëêà
Äëÿ îáåñïå÷åíèÿ íà äåæíîé ñâàðêè íåîáõîäèìî ÷åðåç ðåãóëÿðíûå
ïðîìåæóòêè âðåìåíè ÷èñòèòü è çàìåíÿòü áûñòðîèçíàøèâàåìûå äåòàëè
ñâàðî÷íîé ãîðåëêè.
7 ÏÎÈÑÊ È ÓÑÒÐÀÍÅÍÈÅ ÍÅÈÑÏÐÀÂÍÎÑÒÅÉ
Ïðåæäå ÷åì âûçûâàòü àâòîð èçîâàííîãî ñïåöèàëèñòà ïî òåõíè÷åñêîìó
îáñëóæèâàíèþ, ïîïðîáóéòå ñàìîñòîÿòåëüíî âûïîëíèòü ðåê îìåíäóåìûå íèæå
ïðîâåðêè.
Òèï íåèñïðàâíîñòè Ðåêîìåíäóåìûå ìåðû
Îòñóòñòâèå äóãè S Ïðîâåðüòå, âêëþ÷åí ëè âûêëþ÷àòåëü ïèòàíèÿ.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäêëþ÷åíèÿ ñâàðî÷íîãî è
îáðàòíîãî ïðîâîäà.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Ïðîâåðüòå íàëè÷èå íàïðÿæåíèÿ â ñåòè ïèòàíèÿ.
 ïðîöåññå ñâàðêè ïðîïàë
ñâàðî÷íûé òîê.
S Ïðîâåðüòå íàëè÷èå ñðàáàòûâàíèÿ óñòðîéñòâ
îòêëþ÷åíèÿ ïðè ïåðåãðåâå.
S Ïðîâåðüòå ïðåäîõðàíèòåëè â öåïè ñåòåâîãî ïèòàíèÿ.
RU
bt34d1ra -- 1 3 --
Òèï íåèñïðàâíîñòè Ðåêîìåíäóåìûå ìåðû
×àñòîå ñðàáàòûâàíèå ðåëå
çàùèòû îò òåïëîâîé
ïåðåãðóçêè.
S Óáåäèòåñü â òîì, ÷òî íå ïðåâûøåíû íîìèíàëüíûå
çíà÷åíèÿ ïàðàìåòðîâ èñòî÷íèêà ñâàðî÷íîãî òîêà (ò. å.
÷òî áëîê ðàáîòàåò áåç ïåðåãðóçêè).
S Óáåäèòåñü, ÷òî èñòî÷íèê ïèòàíèÿ íàõîäèòñÿ â ÷èñòîì
ñîñòîÿíèè.
Íèçêàÿ ýôôåêòèâíîñòü
ñâàðêè.
S Ïðîâåðüòå ïðàâèëüíîñòü ïîäêëþ÷åíèÿ ñâàðî÷íîãî è
îáðàòíîãî ïðîâîäà.
S Ïðîâåðüòå, ïðàâèëüíî ëè çàäàíà âåëè÷èíà òîêà.
S Óáåäèòåñü â òîì, ÷òî èñïîëüçóþòñÿ ýëåêòðîäû
òðåáóåìîãî òèïà.
S Ïðîâåðüòå ðàñõîä ãàçà.
8 ÇÀÊÀÇ ÇÀÏÀÑÍÛÕ ×ÀÑÒÅÉ
Ðàáîòû ïî ðåìîíòó è ýëåêòðè÷åñêîìó ìîíòàæó äîëæíû âûïîëíÿòüñÿ
êâàëèôèöèðîâàííûì ñïåöèàëèñòîì ESAB .
Íåîáõîäèìî èñïîëüçîâàòü òîëüêî çàïàñíûå ÷àñòè, âûïóùåííûå ôèðìîé
ESAB.
Çàïàñíûå ÷àñòè ìîæíî çàêàçòú ó áëèæàéøåãî ê Âàì ESAB, (ñì. ïåðå÷åíú íà
ïîñëåäíåé ñòðàíèöå äàííîé áðîøþðû).
9 ÄÅÌÎÍÒÀÆ È ÓÒÈËÈÇÀÖÈß
Ñâàðî÷íîå îáîðóäîâàíèå â îñíîâíîì ñîñòîèò èç ñòà ëè, ïëàñòìàññû è öâåòíûõ
ìåòàëëîâ, è äîëæíî ó òèëèçèðîâàòüñÿ ñîãëàñíî äåéñòâóþùèì íîðìàì â îáëàñòè
çàùèòû îêðóæàþùåé ñðåäû.
Îõëàæäàþùàÿ æèäêîñòü òàêæå ïîäëåæèò îáðàáîòêå â ñîîòâåòñòâèè ñ
äåéñòâóþùèìè íîðìàìè â îáëàñòè çàùèòû îêðóæàþùåé ñðåäû.
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
RU
ENGLISH
-- 1 4 --
TOCe
1 DIRECTIVE 15........................................................
2SAFETY 15...........................................................
3 INTRODUCTION 17...................................................
3.1 Equipment 17................................................................
3.2 Control panels 17............................................................
4 TECHNICAL DATA 17.................................................
5 INSTALLATION 18....................................................
5.1 Location 18..................................................................
5.2 Mains power supply 19........................................................
6 OPERATION 20.......................................................
6.1 Connections and control devices 20............................................
6.2 Key to symbols 20............................................................
6.3 Water connection 20..........................................................
6.4 TIG--welding 21..............................................................
6.5 MMA--svetsning 21...........................................................
6.6 Overheating protection 21.....................................................
6.7 Connection to cooling unit
(only valid for Caddyt Tig 2200i) 21.............................................
6.8 Turning on the power source 21................................................
7 MAINTENANCE 22....................................................
7.1 Inspection and cleaning 22....................................................
8 FAULT--TRACING 22..................................................
9 ORDERING SPARE PARTS 23..........................................
10 DISMANTLING AND SCRAPPING 23...................................
DIAGRAM 24............................................................
ORDERING NUMBER 30.................................................
ACCESSORIES 31.......................................................
-- 1 5 --
bt34d1ea
1DIRECTIVE
DECLARATION OF CONFORMITY
ESAB AB, Welding Equipment, SE--695 81 Laxå, Sweden, gives its unreserved guarantee that weld-
ing power source Tig 1500i, 2200i, 2200iw from serial number 803 are constructed and tested in
compliance with the standard EN 60974--1 /--3 and EN 60974--10 (Class A) in accordance with the
requirements of directive (2006/95/EC) and (2004/108/EEC).
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --------
Kent Eimbrodt
Global Director
Equipment and Automation
Laxå 2008--01--25
2SAFETY
Users of ESAB welding equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety precautions
must meet the requirements that apply to this type of welding equipment. The following recommen-
dations should be observed in addition to the standard regulations that apply to the workplace.
All work must be carried out by trained personnel well--acquainted with the operation of the welding
equipment. Incorrect operation of the equipment may lead to hazardous situations which can result
in injury to the operator and damage to the equipment.
1. Anyone who uses the welding equipment must be familiar with:
S its operation
S location of emergency stops
S its function
S relevant safety precautions
S welding
2. The operator must ensure that:
S no unauthorized person is stationed within the working area of the equipment when it is
started up.
S no--one is unprotected when the arc is struck
3. The workplace must:
S be suitable for the purpose
S be free from drafts
4. Personal safety equipment
S Always wear recommended personal safety equipment, such as safety glasses, flame--proof
clothing, safety gloves.
S Do not wear loose--fitting items, such as scarves, bracelets, rings, etc., which could become
trapped or cause burns.
5. General precautions
S Make sure the return cable is connected securely.
S Work on high voltage equipment may only be carried out by a qualified electrician.
S Appropriate fire extinquishing equipment must be clearly marked and close at hand.
S Lubrication and maintenance must not be carried out on the equipment during operation.
GB
-- 1 6 --
bt34d1ea
WARNING
Read and understand the instruction manual before installing or operating.
Arc welding and cutting can be injurious to yourself and others. Take precausions when welding.
Ask for your employer’s safety practices which should be based on manufacturers’ hazard data.
ELECTRIC SHOCK - Can kill
S Install and earth the welding unit in accordance with applicable standards.
S Do not touch live electrical parts or electrodes with bare skin, wet gloves or wet clothing.
S Insulate yourself from earth and the workpiece.
S Ensure your working stance is s afe.
FUMES AND GASES - Can be dangerous to health
S Keep your head out of the fumes.
S Use ventilation, extraction at the arc, or both, to take fumes and gases away from your breathing zone
and the general area.
ARC RAYS - Can injure eyes and burn skin.
S Protect your eyes and body. Use the correct welding screen and filter lens and wear protective
clothing.
S Protect bystanders with suitable screens or curtains.
FIRE HAZARD
S Sparks (spatter) can cause fire. Make sure therefore that there are no inflammable materials nearby.
NOISE - Excessive noise can damage hearing
S Protect your ears. Use earmuffs or other hearing protection.
S Warn bystanders of the risk.
MALFUNCTION - Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
ESAB can provide you with all necessary welding p rotectio n and accessories.
WARNING!
Do not use the power source for thawing frozen pipes.
CAUTION!
Read and understand the instruction manual before
installing or operating.
CAUTION!
This product is solely intended for arc welding.
CAUTION!
Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low--voltage supply
system. There may be potential difficulties in ensuring electromagnic
compatibility of class A equipment in those locations, due to conducted
as well as radiated disturbances.
GB
-- 1 7 --
bt34d1ea
3 INTRODUCTION
The Tig 1500i / 2200i is a TIG welding power source, which can also be used for
MMA welding. It can be used direct current (DC).
ESAB’s accessories for the product can be found on page 31.
3.1 Equipment
Thepowersourceissuppliedwitha3mweldingcablecompletewithaTIG--torch,
3 m return cable, 3 m mains cable, instruction manual for power source and control
panel, see Ordering information on page 30.
3.2 Control panels
S TA33 S TA34
See the separate instruction manual for a detailed description of the control panels.
4 TECHNICAL DATA
Tig 1500i Tig 2200i/2200iw
Mains voltage
230V, ±10%, 1 50/60 Hz 230V, ±10%, 1 50/60 Hz
Primary current
I
max
TIG
I
max
MMA
13.8 A
21.3 A
24.1 A
24.9 A
Mains supply Z
max
0.35 ohm Z
max
0.30 ohm
No--load power 30 W 30 W
Setting range
TIG
MMA
3 -- 150 A
4 -- 150 A
3 -- 220 A
4 -- 170 A
Permissible load at TIG
20% duty cycle
25% duty cycle
60% duty cycle
100% duty cycle
150 A / 16.0 V
120 A / 14.8 V
110A/14.4V
220 A / 18.8 V
150 A / 16.0 V
110A/14.4V
Permissible load at MMA
30% duty cycle
60% duty cycle
100% duty cycle
150 A / 26.0 V
100 A / 24.0 V
90 A / 23.6 V
170 A / 26.8 V
130 A / 25.2 V
110A/24.4V
Power factor at maximum current
TIG
MMA
0.99
0.99
0.99
0.99
GB
-- 1 8 --
bt34d1ea
Tig 2200i/2200iwTig 1500i
Efficiency at maximum current
TIG
MMA
76 %
80 %
78 %
81 %
Open --circuit voltage MMA 72 V 72 V
Operating temperature -- 1 0 t o + 4 0 ˚C -- 1 0 t o + 4 0 ˚C
T ransportation temperature -- 2 0 t o + 5 5 ˚C -- 2 0 t o + 5 5 ˚C
Constant sound pressure in
open --circuit
<70dB(A) <70dB(A)
Dimensions, l x b x h 418 x 188 x 208 mm 418 x 188 x 208 mm
including the cooling unit -- 418 x 188 x 345 mm
Weight
cooling unit with/without cooling water
9.2 kg
--
9.4 kg
6.7 / 4.5 kg
Shielding gas
max pressure
All types intended for TIG
welding
5 bar
All types intended for TIG
welding
5 bar
Insulation class transformer H H
Enclosure class IP 23 IP 23
Application class
Duty cycle
The duty cycle refers to the time as a percentage of a ten--minute period that you can weld at a cer-
tain load without overloading.
The duty cycle is valid for 40˚C ambient temperature.
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
Mains supply, Z
max
Maximum permissible line on the network impedance in accordance with IEC 61000--3--11.
5 I NSTALLATION
The installatio n must be executed b y a p rofession al.
Note!
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains supply, influence the
power quality of the grid. Therefore connection restrictions or requirements regarding the
maximum permissible mains impedance or the required minimum supply capacity at the interface
point to the public grid may apply for some types of equipment (see technical data). In this case it
is the responsibility of the installer or user of the equipment to ensure, by consultation with the
distrubution network operator if necessary, that the equipment may be connected.
5.1 Location
Position the welding power source such that its cooling air inlets and outlets are not
obstructed.
GB
-- 1 9 --
bt34d1ea
5.2 Mains power supply
Check that the welding power source is connected to the
correct mains power supply voltage, and that it is
protected by the corr e ct fuse size.
A protective earth connection must be made in
accordance with r egulations.
Rating plate with supply connection data
Recommend ed fuse sizes an d minimum cable area
Tig 1500i Tig 2200i/2200iw
TIG MMA TIG MMA
Mains voltage
230 V ¦10 %,
1μ
230 V ¦10 %,
1μ
230 V ¦10 %,
1μ
230 V ¦10 %,
1μ
Mains frequency 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
Mains cable area mm
2
3G2.5 3G2.5 3G2.5 3G2.5
Phase current I
1eff
9.1 A 11.5 A 11.5 A 13.4 A
Fuse
anti--surge
type C MCB
16 A
13 A
16 A
13 A
16 A
16 A
16 A
16 A
NOTE! The mains cable areas and fuse sizes as shown above are in accordance with Swedish
regulations. Use the welding power source in accordance with the relevant national regulations.
GB
-- 2 0 --
bt34d1ea
6 OPERATION
General safety regulations for the handling of the equipment can be found on
page 15. Read through before you start using the equipment!
6.1 Connections and control devices
1 Connection (+) for the return cable for
TIG.
MMA: for the return cable or the welding
cable.
7 Mains switch
2 Connection for the remote control unit 8 Mains cable
3 Control panel (see separate instruction
manual)
9 Connection for shiedling gas
4 Connection for the TIG--torch 10 Connection BLUE, with ELP* for cooling
water from the cooling unit
5 Connection for gas to the TIG--torch 11 Connection RED for cooling water to the
cooling unit.
6 Connection (--) for the TIG--torch
MMA: return cable or welding cable
12 Refilling of cooling water
* ESAB Logic Pump, see under 6.3
6.2 Key to symbols
MMA TIG
6.3 Water connection
The cooling unit is equipped with a detection system ELP (ESAB Logic Pump) which
checks that the water hoses are connected. When connecting a water--cooled T IG
torchcoolingstarts.
GB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

ESAB Tig 1500i, Tig 2200i, Caddy® Tig 1500i, Caddy® Tig 2200i Manuale utente

Categoria
Sistema di saldatura
Tipo
Manuale utente
Questo manuale è adatto anche per