Aeg-Electrolux S51440TSX0 Manuale utente

Marca: Aeg-Electrolux

Modello: S51440TSX0

Categoria: Frigoriferi combinati

Tipo: Manuale utente

S51440TSX0

REFRIGERATOR USER MANUAL

FRIGORIFERO ISTRUZIONI PER L’USO

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have

created it to give you impeccable performance for many

years, with innovative technologies that help make life

simpler – features you might not find on ordinary

appliances. Please spend a few minutes reading to get the

very best from it.

ACCESSORIES AND CONSUMABLES

In the AEG webshop, you’ll find everything you need to

keep all your AEG appliances looking spotless and

working perfectly. Along with a wide range of accessories

designed and built to the high quality standards you

would expect, from specialist cookware to cutlery baskets,

from bottle holders to delicate laundry bags…

Visit the webshop at:

www.aeg-electrolux.com/shop

CONTENTS

4 Safety information

6 Operation

7 First use

7Daily use

9 Helpful hints and tips

11 Care and cleaning

13 What to do if…

15 Technical data

15 Installation

20 Environmental concerns

The following symbols are used in this user

manual:

Important information concerning your

personal safety and information on how to

avoid damaging the appliance.

General information and tips

Environmental information

Subject to change without notice

Contents

SAFETY INFORMATION

In the interest of your safety and to ensure the correct use, before installing and first using

the appliance, read this user manual carefully, including its hints and warnings. To avoid

unnecessary mistakes and accidents, it is important to ensure that all people using the ap-

pliance are thoroughly familiar with its operation and safety features. Save these instruc-

tions and make sure that they remain with the appliance if it is moved or sold, so that ev-

eryone using it through its life will be properly informed on appliance use and safety.

For the safety of life and property keep the precautions of these user's instructions as the

manufacturer is not responsible for damages caused by omission.

Children and vulnerable people safety

• This appliance is not intended for use by persons (including children) with reduced physi-

cal, sensory or mental capabilities, or lack of experience and knowledge, unless they have

been given supervision or instruction concerning use of the appliance by a person re-

sponsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

• Keep all packaging well away from children. There is risk of suffocation.

• If you are discarding the appliance pull the plug out of the socket, cut the connection

cable (as close to the appliance as you can) and remove the door to prevent playing chil-

dren to suffer electric shock or to close themselves into it.

• If this appliance featuring magnetic door seals is to replace an older appliance having a

spring lock (latch) on the door or lid, be sure to make that spring lock unusable before

you discard the old appliance. This will prevent it from becoming a death trap for a child.

General safety

CAUTION!

Keep ventilation openings clear of obstruction.

• The appliance is intended for keeping foodstuff and/or beverages in a normal household

as explained in this instruction booklet.

• Do not use a mechanical device or any artificial means to speed up the thawing process.

• Do not use other electrical appliances (such as ice cream makers) inside of refrigerating

appliances, unless they are approved for this purpose by the manufacturer.

• Do not damage the refrigerant circuit.

• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appli-

ance, a natural gas with a high level of environmental compatibility, which is neverthe-

less flammable.

During transportation and installation of the appliance, be certain that none of the com-

ponents of the refrigerant circuit become damaged.

If the refrigerant circuit should become damaged:

– avoid open flames and sources of ignition

– thoroughly ventilate the room in which the appliance is situated

4 Safety information

• It is dangerous to alter the specifications or modify this product in any way. Any damage

to the cord may cause a short-circuit, fire and/or electric shock.

WARNING!

Any electrical component (power cord, plug, compressor) must be replaced by a certified

service agent or qualified service personnel.

1. Power cord must not be lengthened.

2. Make sure that the power plug is not squashed or damaged by the back of the appli-

ance. A squashed or damaged power plug may overheat and cause a fire.

3. Make sure that you can come to the mains plug of the appliance.

4. Do not pull the mains cable.

5. If the power plug socket is loose, do not insert the power plug. There is a risk of elec-

tric shock or fire.

You must not operate the appliance without the lamp cover

of interior lighting.

• This appliance is heavy. Care should be taken when moving it.

• Do not remove nor touch items from the freezer compartment if your hands are damp/

wet, as this could cause skin abrasions or frost/freezer burns.

• Avoid prolonged exposure of the appliance to direct sunlight.

•

Bulb lamps

used in this appliance are special purpose lamps selected for household ap-

pliances use only. They are not suitable for household room illumination.

Daily Use

• Do not put hot pot on the plastic parts in the appliance.

• Do not store flammable gas and liquid in the appliance, because they may explode.

•

Do not place food products directly against the air outlet on the rear wall.

• Frozen food must not be re-frozen once it has been thawed out.

• Store pre-packed frozen food in accordance with the frozen food manufacturer's in-

structions.

• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer

to relevant instructions.

• Do not place carbonated or fizzy drinks in the freezer compartment as it creates pressure

on the container, which may cause it to explode, resulting in damage to the appliance.

• Ice lollies can cause frost burns if consumed straight from the appliance.

Care and cleaning

• Before maintenance, switch off the appliance and disconnect the mains plug from the

mains socket.

• Do not clean the appliance with metal objects.

• Do not use sharp objects to remove frost from the appliance. Use a plastic scraper.

• Regularly examine the drain in the refrigerator for defrosted water. If necessary, clean

the drain. If the drain is blocked, water will collect in the bottom of the appliance.

1) If the lamp cover is foreseen.

2) If the lamp is foreseen.

3) If the appliance is Frost Free.

Safety information 5

Installation

For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there are damages on it. Do not connect the appli-

ance if it is damaged. Report possible damages immediately to the place you bought it.

In that case retain packing.

• It is advisable to wait at least four hours before connecting the appliance to allow the oil

to flow back in the compressor.

• Adequate air circulation should be around the appliance, lacking this leads to overheat-

ing. To achieve sufficient ventilation follow the instructions relevant to installation.

• Wherever possible the back of the product should be against a wall to avoid touching or

catching warm parts (compressor, condenser) to prevent possible burn.

• The appliance must not be located close to radiators or cookers.

• Make sure that the mains plug is accessible after the installation of the appliance.

•

Connect to potable water supply only.

Service

• Any electrical work required to do the servicing of the appliance should be carried out by

a qualified electrician or competent person.

• This product must be serviced by an authorized Service Centre, and only genuine spare

parts must be used.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its

refrigerant circuit or insulation materials. The appliance shall not be discarded together

with the urban refuse and rubbish. The insulation foam contains flammable gases: the ap-

pliance shall be disposed according to the applicable regulations to obtain from your local

authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchang-

er. The materials used on this appliance marked by the symbol

are recyclable.

OPERATION

Switching on

Insert the plug into the wall socket.

Turn the Temperature regulator clockwise to a medium setting.

Switching off

To turn off the appliance, turn the Temperature regulator to the "O" position.

Temperature regulation

The temperature is automatically regulated.

To operate the appliance, proceed as follows:

• turn the Temperature regulator toward lower settings to obtain the minimum coldness.

4) If a water connection is foreseen.

6 Operation

• turn the Temperature regulator toward higher settings to obtain the maximum coldness.

A medium setting is generally the most suitable.

However, the exact setting should be chosen keeping in mind that the temperature inside

the appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

If the ambient temperature is high or the appliance is fully loaded, and the appliance is set

to the lowest temperatures, it may run continuously causing frost to form on the rear wall.

In this case the dial must be set to a higher temperature to allow automatic defrosting and

therefore reduced energy consumption.

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accessories

with lukewarm water and some neutral soap so as to remove the typical smell of a brand-

new product, then dry thoroughly.

Do not use detergents or abrasive powders, as these will damage the finish.

DAILY USE

Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-

frozen food for a long time.

To freeze fresh foods it is not necessary to change the medium setting.

However, for a faster freezing operation, turn the temperature regulator toward higher set-

tings to obtain the maximum coldness.

In this condition, the refrigerator compartment temperature might drop below 0°C. If this

occurs reset the temperature regulator to a warmer setting.

Storage of frozen food

When first starting-up or after a period out of use, before putting the products in the com-

partment let the appliance run at least 2 hours on the higher settings.

In the event of accidental defrosting, for example due to a power failure, if the power has

been off for longer than the value shown in the technical characteristics chart under "rising

time", the defrosted food must be consumed quickly or cooked immediately and then re-

frozen (after cooling).

First use

Thawing

Deep-frozen or frozen food, prior to being used, can be thawed in the refrigerator compart-

ment or at room temperature, depending on the time available for this operation.

Small pieces may even be cooked still frozen, directly from the freezer: in this case, cooking

will take longer.

Movable shelves

The walls of the refrigerator are equipped with a

series of runners so that the shelves can be posi-

tioned as desired.

this appliance is sold in France.

In accordance with regulations valid in this country it must be provided with a special de-

vice (see figure) placed in the lower compartment of the fridge to indicate the coldest zone

of it.

8 Daily use

Positioning the door shelves

To permit storage of food packages of various

sizes, the door shelves can be placed at different

heights.

To make these adjustments proceed as follows:

gradually pull the shelf in the direction of the ar-

rows until it comes free, then reposition as re-

quired.

HELPFUL HINTS AND TIPS

Normal Operating Sounds

• You may hear a faint gurgling and a bubbling sound when the refrigerant is pumped

through the coils or tubing. This is correct.

• When the compressor is on, the refrigerant is being pumped around and you will hear a

whirring sound and a pulsating noise from the compressor. This is correct.

• The thermic dilatation might cause a sudden cracking noise. It is natural, not dangerous

physical phenomenon. This is correct.

• When the compressor switches on or switches off, you will hear a faint "click" of the

temperature regulator. This is correct.

Hints for energy saving

• Do not open the door frequently or leave it open longer than absolutely necessary.

• If the ambient temperature is high and the Temperature Regulator is set to low tempera-

ture and the appliance is fully loaded, the compressor may run continuously, causing

frost or ice on the evaporator. If this happens, set the Temperature Regulator toward

warmer settings to allow automatic defrosting and so a saving in electricity consump-

tion.

Hints for fresh food refrigeration

To obtain the best performance:

• do not store warm food or evaporating liquids in the refrigerator

• do cover or wrap the food, particularly if it has a strong flavour

Helpful hints and tips 9

• position food so that air can circulate freely around it

Hints for refrigeration

Useful hints:

Meat (all types) : wrap in polythene bags and place on the glass shelf above the vegetable

drawer.

For safety, store in this way only one or two days at the most.

Cooked foods, cold dishes, etc..: these should be covered and may be placed on any shelf.

Fruit and vegetables: these should be thoroughly cleaned and placed in the special draw-

er(s) provided.

Butter and cheese: these should be placed in special airtight containers or wrapped in alu-

minium foil or polythene bags to exclude as much air as possible.

Milk bottles: these should have a cap and should be stored in the bottle rack on the door.

Bananas, potatoes, onions and garlic, if not packed, must not be kept in the refrigerator.

Hints for freezing

To help you make the most of the freezing process, here are some important hints:

• the maximum quantity of food which can be frozen in 24 hrs. is shown on the rating

plate;

• the freezing process takes 24 hours. No further food to be frozen should be added during

this period;

• only freeze top quality, fresh and thoroughly cleaned, foodstuffs;

• prepare food in small portions to enable it to be rapidly and completely frozen and to

make it possible subsequently to thaw only the quantity required;

• wrap up the food in aluminium foil or polythene and make sure that the packages are

airtight;

• do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a

rise in temperature of the latter;

• lean foods store better and longer than fatty ones; salt reduces the storage life of food;

• water ices, if consumed immediately after removal from the freezer compartment, can

possibly cause the skin to be freeze burnt;

• it is advisable to show the freezing in date on each individual pack to enable you to keep

tab of the storage time.

Hints for storage of frozen food

To obtain the best performance from this appliance, you should:

• make sure that the commercially frozen foodstuffs were adequately stored by the retail-

er;

• be sure that frozen foodstuffs are transferred from the foodstore to the freezer in the

shortest possible time;

• not open the door frequently or leave it open longer than absolutely necessary.

• Once defrosted, food deteriorates rapidly and cannot be refrozen.

• Do not exceed the storage period indicated by the food manufacturer.

10 Helpful hints and tips

CARE AND CLEANING

CAUTION!

Unplug the appliance before carrying out any maintenance operation.

This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must

therefore only be carried out by authorized technicians.

Periodic cleaning

The equipment has to be cleaned regularly:

• clean the inside and accessories with lukewarm water and some neutral soap.

• regularly check the door seals and wipe clean to ensure they are clean and free from

debris.

• rinse and dry thoroughly.

Do not pull, move or damage any pipes and/or cables inside the cabinet.

Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes

to clean the interior as this will damage the surface and leave a strong odour.

Clean the condenser (black grill) and the compressor at the back of the appliance with a

brush or a vacuum cleaner. This operation will improve the performance of the appliance

and save electricity consumption.

Take care of not to damage the cooling system.

Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the

plastics used in this appliance. For this reason it is recommended that the outer casing of

this appliance is only cleaned with warm water with a little washing-up liquid added.

After cleaning, reconnect the equipment to the mains supply.

Defrosting of the refrigerator

Frost is automatically eliminated from the evaporator of the refrigerator compartment ev-

ery time the motor compressor stops, during normal use. The defrost water drains out

through a trough into a special container at the back of the appliance, over the motor com-

pressor, where it evaporates.

Care and cleaning

It is important to periodically clean the defrost

water drain hole in the middle of the refrigerator

compartment channel to prevent the water over-

flowing and dripping onto the food inside. Use

the special cleaner provided, which you will find

already inserted into the drain hole.

Defrosting the freezer

A certain amount of frost will always form on the freezer shelves and around the top com-

partment.

Defrost the freezer when the frost layer reaches a thickness of about 3-5 mm.

To remove the frost, do these steps:

1. Switch off the appliance.

2. Remove any stored food, wrap it in several layers of newspaper and put it in a cool

place.

3. Leave the door open.

4. When defrosting is completed, dry the interior thoroughly and refit the plug.

5. Switch on the appliance.

6. Set the temperature regulator to obtain the maximum coldness and run the appliance

for two or three hours using this setting.

7. Reload the previously removed food into the compartment.

Never use sharp metal tools to scrape off frost from the evaporator as you could damage it.

Do not use a mechanical device or any artificial means to speed up the thawing process

other than those recommended by the manufacturer. A temperature rise of the frozen food

packs, during defrosting, may shorten their safe storage life.

Periods of non-operation

When the appliance is not in use for long periods, take the following precautions:

1. disconnect the appliance from electricity supply

2. remove all food

3. defrost and clean the appliance and all accessories

4. leave the door/doors open to prevent unpleasant smells.

12 Care and cleaning

If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food

inside from spoiling in case of a power failure.

WHAT TO DO IF…

WARNING!

Before troubleshooting, disconnect the mains plug from the mains socket.

Only a qualified electrician or competent person must do the troubleshooting that is not in

this manual.

There are some sounds during normal use (compressor, refrigerant circulation).

Problem Possible cause Solution

The appliance is noisy The appliance is not supported

properly

Check if the appliance stands sta-

ble (all the four feet should be on

the floor)

The appliance does not

operate. The lamp does

not operate.

The appliance is switched off. Switch on the appliance.

The mains plug is not connected

to the mains socket correctly.

Connect the mains plug to the

mains socket correctly.

The appliance has no power.

There is no voltage in the mains

socket.

Connect a different electrical ap-

pliance to the mains socket.

Contact a qualified electrician.

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp is defective. Refer to "Replacing the lamp".

The compressor operates

continually.

The temperature is not set cor-

rectly.

Set a higher temperature.

The door is not closed correctly. Refer to "Closing the door".

The door has been opened too

frequently.

Do not keep the door open longer

than necessary.

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

The room temperature is too

high.

Decrease the room temperature.

Water flows on the rear

plate of the refrigerator.

During the automatic defrosting

process, frost defrosts on the

rear plate.

This is correct.

Water flows into the re-

frigerator.

The water outlet is clogged. Clean the water outlet.

Products prevent that water

flows into the water collector.

Make sure that products do not

touch the rear plate.

What to do if… 13

Problem Possible cause Solution

Water flows on the

ground.

The melting water outlet does

not flow in the evaporative tray

above the compressor.

Attach the melting water outlet

to the evaporative tray.

The temperature in the

appliance is too low.

The temperature regulator is not

set correctly.

Set a higher temperature.

The temperature in the

appliance is too high.

The temperature regulator is not

set correctly.

Set a lower temperature.

The door is not closed correctly. Refer to "Closing the door".

The product temperature is too

high.

Let the product temperature de-

crease to room temperature be-

fore storage.

Many products are stored at the

same time.

Store less products at the same

time.

The temperature in the re-

frigerator is too high.

There is no cold air circulation in

the appliance.

Make sure that there is cold air

circulation in the appliance.

The temperature in the

freezer is too high.

Products are too near to each

other.

Store products so that there is

cold air circulation.

There is too much frost. Food is not wrapped correctly. Wrap the food correctly.

The door is not closed correctly. Refer to "Closing the door".

The temperature regulator is not

set correctly.

Set a higher temperature.

Replacing the lamp

1. Disconnect the mains plug from the mains socket.

2. Remove the screw from the lamp cover.

3. Remove the lamp cover (refer to the illus-

tration).

4. Replace the used lamp with a new lamp

of the same power and specifically de-

signed for household appliances. (the

maximum power is shown on the lamp

cover).

5. Install the lamp cover.

6. Tighten the screw to the lamp cover.

7. Connect the mains plug to the mains socket.

8. Open the door. Make sure that the lamp comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets. Contact the Service Center.

14 What to do if…

TECHNICAL DATA

Dimension

Height 850 mm

Width 595 mm

Depth 635 mm

Rising Time 11 h

The technical information are situated in the rating plate on the internal left side of the

appliance and in the energy label.

INSTALLATION

WARNING!

Read the "Safety Information" carefully for your safety and correct operation of the appli-

ance before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated indoor (garage or cellar) also, but for

optimum performance install this appliance at a location where the ambient temperature

corresponds to the climate class indicated on the rating plate of the appliance:

Climate class Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

Levelling

When placing the appliance ensure that it stands

level. This can be achieved by two adjustable feet

at the bottom in front (2). If necessary adjust the

feet by removing the spacer (1).

Technical data 15

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc. Ensure that air can circulate freely

around the back of the cabinet.To ensure best

performance, if the appliance is positioned below

an overhanging wall unit, the minimum distance

between the top of the cabinet and the wall unit

must be at least 100 mm . Ideally, however, the

appliance should not be positioned below over-

hanging wall units. Accurate levelling is ensured

by one or more adjustable feet at the base of the

cabinet. If the cabinet is placed in a corner and

the side with the hinges facing the wall, the dis-

tance between the wall and the cabinet must be at least 10 mm to allow the door to open

enough so that the shelves can be removed.

WARNING!

It must be possible to disconnect the appliance from the mains power supply; the plug

must therefore be easily accessible after installation.

Installing under a continuous worktop

If your refrigerator is installed under a continuous

worktop, an air outlet opening of at least 200cm

and a ventilation grille matching the worktop de-

sign should be installed at the rear of the work-

top.

The cut surfaces of the worktop should be var-

nished to avoid swelling due to penetration of

moisture.

The appliance wall distance must be at least 30

mm and should be checked before the ventilation

grille is inserted.

15mm

15mm 100mm

500/550/600

105

570

550

93-103

200 cm

820 min

16 Installation

Detaching the worktop

To remove the worktop, please proceed as follows:

1. Unscrew left and right screws at the front.

2. Unscrew left and right screws at the back.

3. Lift the worktop slightly at the front, push

back about 20 mm and lift off from the front.

4. Unscrew left and right screws at the back.

5. Store the screws in a safe place together with

the worktop.

Fitting and mounting to continuous worktop

Before fitting, change the door opening direction

if necessary (see: Door reversibility).

Push the appliance carefully into the niche.

Take care that the mains cable is not jammed in.

Check distance from wall (see: Installing under a

continuous worktop).

Level the appliance by screwing the two adjusta-

ble feet at the front in or out, thus ensuring a sta-

ble position.

With a suitable screws (depending on the design

of the worktop and the distance between the appliance and the worktop, not supplied), fix

the appliance under the worktop through the upper door hinge. If necessary, equalise the

gap between the door hinge and the worktop with a suitable washer (plastic or wood, not

supplied). This will prevent bending of the hinge and possible failure of door function.

Door reversibility

To carry out the following operations, we suggest that this be made with another person

that will keep a firm hold on the doors of the appliance during the operations.

To change the opening direction of the door, do these steps:

1. Remove the plug from the power socket.

2. Tilt back the appliance carefully so that the compressor cannot touch the floor.

Installation 17

3. Unscrew both adjustable feet.

4. Unscrew the screws of the door bottom

hinge.

5. Take off the appliance door by pulling it

slightly downwards.

6. Unscrew the top door hinge pin of the

appliance then screw it back on the oth-

er side.

7. Fit the appliance door on the upper door

hinge pin.

8. Remove the lower hinge. Put over the

pin in the direction of the arrow.

9. Unscrew and install the screw on the

opposite side.

10. Install the lower hinge on the opposite

side leaving the position of the door un-

changed.

11. Screw in the one screw in the place set free on the other side as well as the adjustable

feet (2 pieces).

12.

Remove and install the handle

on the

opposite side.

13. Reposition, level the appliance, wait for

at least four hours and then connect it

to the power socket.

Do a final check to make sure that:

• All screws are tightened.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in

Winter), the gasket may not fit perfectly to

the cabinet. In that case, wait for the natural

fitting of the gasket.

In case you do not want to carry out the above mentioned operations, contact the nearest

After Sales Service Force. The After Sales Service specialist will carry out the reversibility of

the doors at your cost.

5) If foreseen

18 Installation

Reversibility of the freezer door

180˚

Plug socket

CAUTION!

Make sure that the mains cable can move freely.

The plug socket necessary for connection of your

appliance to the electricity supply should be posi-

tioned so that it is possible to pull out the appli-

ance plug.

If your appliance is installed under a continuous

worktop, the plug socket should be provided as

shown.

Electrical connection

Before plugging in, ensure that the voltage and frequency shown on the rating plate corre-

spond to your domestic power supply.

The appliance must be earthed. The power supply cable plug is provided with a contact for

this purpose. If the domestic power supply socket is not earthed, connect the appliance to a

separate earth in compliance with current regulations, consulting a qualified electrician.

Installation 19

The manufacturer declines all responsibility if the above safety precautions are not ob-

served.

This appliance complies with the E.E.C. Directives.

ENVIRONMENTAL CONCERNS

The symbol on the product or on its packaging indicates that this product may not be

treated as household waste. Instead it should be taken to the appropriate collection point

for the recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences for the

environment and human health, which could otherwise be caused by inappropriate waste

handling of this product. For more detailed information about recycling of this product,

please contact your local council, your household waste disposal service or the shop where

you purchased the product.

20 Environmental concerns

La pagina sta caricando ...

Aeg-Electrolux S51440TSX0 Manuale utente

Marca: Aeg-Electrolux

Modello: S51440TSX0

Categoria: Frigoriferi combinati

Tipo: Manuale utente

Scarica il pdf

rapporto

in altre lingue

English: Aeg-Electrolux S51440TSX0 User manual

Aeg-Electrolux S51440TSX0 Manuale utente

Aeg-Electrolux S51440TSX0 Manuale utente

in altre lingue

Documenti correlati

Altri documenti