AEG RCB83826TX Manuale utente

USER

MANUAL

EN User Manual 2

Fridge Freezer

FR Notice d'utilisation 15

Réfrigérateur/congélateur

DE Benutzerinformation 29

Kühl - Gefrierschrank

IT Istruzioni per l’uso 44

Frigo-Congelatore

ES Manual de instrucciones 58

Frigorífico-congelador

RCB83826TX

CONTENTS

1. SAFETY INFORMATION.............................................................................................2

2. SAFETY INSTRUCTIONS.............................................................................................4

3. OPERATION.................................................................................................................5

4. DAILY USE....................................................................................................................7

5. CARE AND CLEANING...............................................................................................9

6. TROUBLESHOOTING............................................................................................... 10

7. INSTALLATION..........................................................................................................12

8. TECHNICAL DATA.................................................................................................... 13

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

Register your product for better service:

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1.

SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

manufacturer is not responsible for any injuries or

damages that are the result of incorrect installation or

usage. Always keep the instructions in a safe and

accessible location for future reference.

www.aeg.com

2

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

• Keep all packaging away from children and dispose of

it appropriately.

1.2 General Safety

• This appliance is intended to be used in household

and similar applications such as:

– Farm houses; staff kitchen areas in shops, offices

and other working environments

– By clients in hotels, motels, bed and breakfast and

other residential type environments

• Keep ventilation openings, in the appliance enclosure

or in the built-in structure, clear of obstruction.

• Do not use mechanical devices or other means to

accelerate the defrosting process, other than those

recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances inside the food

storage compartments of the appliance, unless they

are of the type recommended by the manufacturer.

• Do not use water spray and steam to clean the

appliance.

• Clean the appliance with a moist soft cloth. Only use

neutral detergents. Do not use abrasive products,

abrasive cleaning pads, solvents or metal objects.

• Do not store explosive substances such as aerosol

cans with a flammable propellant in this appliance.

ENGLISH

3

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging and the

transit bolts.

• Do not install or use a damaged

appliance.

• Follow the installation instruction

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Make sure the air can circulate around

the appliance.

• At first installation or after reversing

the door wait at least 4 hours before

connecting the appliance to the

power supply. This is to allow the oil

to flow back in the compressor.

• Before carrying out any operations on

the appliance (e.g. reversing the

door), remove the plug from the

power socket.

• Do not install the appliance close to

radiators or cookers, ovens or hobs.

• Do not install the appliance where

there is direct sunlight.

• Do not install this appliance in areas

that are too humid or too cold, such

as the construction appendices,

garages or wine cellars.

• When you move the appliance, lift it

by the front edge to avoid scratching

the floor.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the electrical components (e.g. mains

plug, mains cable, compressor).

Contact the Authorised Service

Centre or an electrician to change the

electrical components.

• The mains cable must stay below the

level of the mains plug.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

2.3 Use

WARNING!

Risk of injury, burns,

electrical shock or fire.

• Do not change the specification of

this appliance.

• Do not put electrical appliances (e.g.

ice cream makers) in the appliance

unless they are stated applicable by

the manufacturer.

• Be careful not to cause damage to

the refrigerant circuit. It contains

isobutane (R600a), a natural gas with a

high level of environmental

compatibility. This gas is flammable.

• If damage occurs to the refrigerant

circuit, make sure that there are no

flames and sources of ignition in the

room. Ventilate the room.

• Do not let hot items to touch the

plastic parts of the appliance.

• Do not put soft drinks in the freezer

compartment. This will create

pressure on the drink container.

www.aeg.com

4

• Do not store flammable gas and

liquid in the appliance.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Do not touch the compressor or the

condenser. They are hot.

• Do not remove or touch items from

the freezer compartment if your hands

are wet or damp.

• Do not freeze again food that has

been thawed.

• Obey the storage instructions on the

packaging of frozen food.

2.4 Internal light

• The type of lamp used for this

appliance is not suitable for

household room illumination

2.5 Care and cleaning

WARNING!

Risk of injury or damage to

the appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• This appliance contains hydrocarbons

in the cooling unit. Only a qualified

person must do the maintenance and

the recharging of the unit.

• Regularly examine the drain of the

appliance and if necessary, clean it. If

the drain is blocked, defrosted water

collects in the bottom of the

appliance.

2.6 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children

and pets to be closed inside of the

appliance.

• The refrigerant circuit and the

insulation materials of this appliance

are ozone-friendly.

• The insulation foam contains

flammable gas. Contact your

municipal authority for information on

how to discard the appliance

correctly.

• Do not cause damage to the part of

the cooling unit that is near the heat

exchanger.

3.

OPERATION

3.1 Control panel

1

2

39

4

7

5

6

8

1. Compartment select key and

ON/OFF key

2. Display

3. Temperature warmer key

4. FROSTMATIC indicator

5. DYNAMICAIR indicator

6. COOLMATIC indicator

7. DYNAMICAIR key

8. Mode key

9. Temperature colder key

ENGLISH 5

It is possible to change predefined

sound of buttons by pressing together

temperature warmer key and

temperature colder key for 3 seconds.

Change is reversible.

Display

B

A

C

A. Compartment indicator

B. ECO mode

C. Temperature compartment indicator

3.2 ON/OFF

Plug the appliance into electrical mains

socket.

Appliance automatically turns ON when

plugged into an electrical mains socket.

1. Turn OFF the appliance by pressing

the ON/OFF key for 3 seconds.

2. Turn ON the appliance by pressing

the ON/OFF key.

3.3 Temperature regulation

1. Select the fridge or freezer

compartment by pressing the

compartment select key.

2. Press the temperature warmer or

colder key to set the temperature as

desire.

The default temperature settings:

• +4°C for fridge compartment;

• -18°C for freezer compartment.

The temperature indicator shows the set

temperature.

Once the maximum or

minimum temperature is set,

pressing the key again will

not change temperature

setting. The audible sound is

heard.

3.4 Active mode

Active mode allows to change any

setting in the appliance.

To switch on active mode, open the door

or hold any button for 1 second until the

audible signal is heard.

The icons illuminate.

The active mode switches off

automatically after 30

seconds.

3.5 Temperature boost

functions COOLMATIC and

FROSTMATIC

The temperature boost functions rapidly

decrease the temperature in desired

compartment for proper food storage

reason. We suggest activating the

COOLMATIC to chill the products more

rapidly to avoid warming the other food

which is already in the refrigerator and

FROSTMATIC function to provide rapid

decreasing the temperature in the

freezer, allowing fresh food to freeze

quickly.

This functions stop

automatically as follows:

• COOLMATIC after 6

hours,

• FROSTMATIC after 52

hours.

1. To switch on the COOLMATIC press

mode key once.

The COOLMATIC indicator appears.

www.aeg.com

6

2. To switch on the COOLMATIC and

FROSTMATIC together press mode

key twice.

The COOLMATIC and FROSTMATIC

indicators appear.

3. To switch on the FROSTMATIC press

mode key three times.

The FROSTMATIC indicator appears.

4. To deactivate the functions press

mode key until the FROSTMATIC

and/or COOLMATIC indicators

switch off.

3.6 ECO mode

The ECO mode is activated if the set

temperature for desired compartment is

as follows :

• 4°C for fridge compartment;

• -18°C for freezer compartment

The ECO mode indicator is shown when

the function is activated.

This settings guarantee

minimum energy

consumption and proper

food preservation

characteristics.

The ECO mode is

deactivated as long as the

DYNAMICAIR function is

switched on.

3.7 DYNAMICAIR function

The activation of the DYNAMICAIR

function increases energy consumption

(refer to "Daily use").

The DYNAMICAIR function

can be activated

automatically

1. To switch on the function manually

press DYNAMICAIR key until the

corresponding indicator illuminate.

The DYNAMICAIR indicator appears.

2. To switch off the function press

DYNAMICAIR key until the

DYNAMICAIR indicator switches off.

3.8 DEMO mode

DEMO mode allows to operate the panel

without activating the appliance.

• To activate the mode, press mode key

9 times, until dE appears on the

display.

• To deactivate the mode, press mode

key for approximately 10 seconds.

The appliance returns to regular

mode.

3.9 High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure or door is open)

is indicated by:

• flashing the compartment select key

and compartment indicator;

• acoustic buzzer.

To reset the alarm press any key.

The buzzer switches off.

The alarm indicators continue to flash

until the normal conditions are restored.

3.10 Door open alarm

An acoustic alarm will sound if the door

is left open for a few minutes. The door

open alarm conditions are indicated by:

• flashing the compartment select key

and compartment indicator;

• acoustic buzzer.

When normal conditions are restored

(door closed), the alarm will stop. During

the alarm, the buzzer can be switched off

by pressing any key.

4.

DAILY USE

WARNING!

Refer to Safety chapters.

ENGLISH 7

4.1 Initial power on

CAUTION!

Before inserting the power

plug in to the outlet and

switching on the cabinet for

the first time, leave the

appliance standing upright

for at least 4 hours. This will

assure a sufficient amount of

time for the oil to return to

the compressor. Otherwise

the compressor or electronic

components may sustain

damage.

4.2 Storage of frozen food

When first starting-up or after a period

out of use, before putting the products

in the compartment let the appliance run

at least 2 hours with the FROSTMATIC

function turned on. The freezer drawers

ensure that it is quick and easy to find

the food package you want. If large

quantities of food are to be stored,

remove all drawers except for the

bottom drawer which needs to be in

place to provide good air circulation. On

all shelves it is possible to place food

that protrude until 15 mm from the door.

4.3 Freezing fresh food

The freezer compartment is suitable for

freezing fresh food and storing frozen

and deep-frozen food for a long time.

To freeze small amount of fresh food it is

not necessary to change the present

setting.

To freeze fresh food activate the

FROSTMATIC function at least 24 hours

before placing the food to be frozen in

the freezer compartment.

Place the food to be frozen in the top

compartment.

The maximum amount of food that can

be frozen in 24 hours is specified on the

rating plate.

The freezing process lasts 24 hours:

during this period do not add other food

to be frozen.

When the freezing process is complete,

return to the required temperature (see

"FROSTMATIC Function").

In this condition, the

refrigerator compartment

temperature might drop

below 0°C. If this occurs

reset the temperature

regulator to a warmer

setting.

4.4 Storing food in a fridge

compartment

Cover or wrap the food, particularly if it

has a strong flavour.

Position the food so that air can circulate

freely around it.

Keep the food on all shelves no closer

than 20 mm from the rear wall and 15

mm from the door.

4.5 FreshBox module

The drawer inside the module is suitable

for storing fresh food like fish, meat,

seafood, because the temperature is

lower here than in the rest of the fridge.

CAUTION!

Before placing or removing

the FreshBox module inside

the appliance, pull out the

MaxiBox drawer and glass

cover.

The FreshBox module is equipped with

runners. At the time of its removal from

the fridge compartment pull the module

towards yourself and remove the basket

by tilting its front downwards.

www.aeg.com

8

4.6 DYNAMICAIR

The refrigerator compartment is

equipped with a device that allows rapid

cooling of food and keeps a more

uniform temperature in the

compartment.

This device activates automatically when

needed, for example for a quick

temperature recovery after door opening

or when the ambient temperature is

high.

It is possible to switch on the device

manually when needed (refer to

"DYNAMICAIR function").

5. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

5.1 Cleaning the interior

Before using the appliance for the first

time, the interior and all internal

accessories should be washed with

lukewarm water and some neutral soap

to remove the typical smell of a brand-

new product, then dried thoroughly.

CAUTION!

Do not use detergents,

abrasive powders, chlorine

or oil-based cleaners as they

will damage the finish.

5.2 Periodic cleaning

CAUTION!

Do not pull, move or

damage any pipes and/or

cables inside the cabinet.

CAUTION!

Take care of not to damage

the cooling system.

CAUTION!

When moving the cabinet,

lift it by the front edge to

avoid scratching the floor.

The equipment has to be cleaned

regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral

soap.

2. Regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

3. Rinse and dry thoroughly.

4. If accessible, clean the condenser

and the compressor at the back of

the appliance with a brush.

This operation will improve the

performance of the appliance and

save electricity consumption.

The lowest shelf, dividing the cooler

compartment from the compartment can

be removed only for cleaning. To remove

pull out the shelf straight.

To make sure fully

functionality of the FreshBox

compartment the lowest

shelf and cover plates must

be put back in their original

position after cleaning.

The cover plates above the drawers in

the compartment can be taken out for

cleaning.

5.3 Defrosting

Your appliance is frost free. This means

that there is no build up of frost when it

ENGLISH

9

is in operation, neither on the internal

walls nor on the foods. The absence of

frost is due to the continuous circulation

of cold air inside the compartment,

driven by an automatically controlled fan.

The defrost water drains out through a

trough into a special container at the

back of the appliance, over the motor

compressor, where it evaporates.

It is important to periodically clean the

defrost water drain hole in the middle of

the refrigerator compartment channel to

prevent the water overflowing and

dripping onto the food inside.

5.4 Periods of non-operation

When the appliance is not in use for long

periods, take the following precautions:

1. Disconnect the appliance from

electricity supply.

2. Remove all food.

3. Clean the appliance and all

accessories.

4. Leave the door/doors open to

prevent unpleasant smells.

6. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

6.1 What to do if...

Problem Possible cause Solution

The appliance is noisy. The appliance is not sup-

ported properly.

Check if the appliance stands

stable.

Audible or visual alarm is

on.

The cabinet has been re-

cently switched on or the

temperature is still too

high.

Refer to "Door Open

Alarm"or "High Temperature

Alarm".

The temperature in the ap-

pliance is too high.

Refer to "Door Open

Alarm"or "High Temperature

Alarm".

The lamp does not work. The lamp is in stand-by

mode.

Close and open the door.

The lamp does not work. The lamp is defective. Contact the nearest Author-

ised Service Centre.

The compressor operates

continually.

Temperature is set incor-

rectly.

Refer to "Operation"/"Control

panel" chapter.

www.aeg.com10

Problem Possible cause Solution

Many food products were

put in at the same time.

Wait a few hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart on

the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool to

room temperature before stor-

ing.

The FROSTMATIC function

is switched on.

Refer to "FROSTMATIC func-

tion".

The COOLMATIC function

is switched on.

Refer to "COOLMATIC func-

tion".

The compressor does not

start immediately after

pressing the FROSTMATIC

or after changing the tem-

perature.

This is normal, no error has

occurred.

The compressor starts after

some time.

The compressor does not

start immediately after

pressing the COOLMATIC

or after changing the tem-

perature.

This is normal, no error has

occurred.

The compressor starts after

some time.

Water flows inside the re-

frigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Food products prevent wa-

ter from flowing into the

water collector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor. The melting water outlet is

not connected to the evap-

orative tray above the com-

pressor.

Attach the melting water out-

let to the evaporative tray.

Temperature cannot be set. The FROSTMATIC or

COOLMATIC function is

switched on.

Switch off FROSTMATIC or

COOLMATIC manually, or wait

until the function resets auto-

matically to set the tempera-

ture. Refer to "FROSTMATIC

or COOLMATIC function".

DEMO appears on the dis-

play.

The appliance is in demon-

stration mode.

Keep the mode key pressed

for approximately 10 seconds

until a long sound is heard and

display shuts off for a short

time.

ENGLISH 11

Problem Possible cause Solution

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The food products temper-

ature is too high.

Let the food products temper-

ature decrease to room tem-

perature before storage.

Many food products were

stored at the same time.

Store less food products at the

same time.

The FROSTMATIC function

is switched on.

Refer to "FROSTMATIC func-

tion".

The COOLMATIC function

is switched on.

Refer to "COOLMATIC func-

tion".

Side panels of the appli-

ance are warm.

This is a normal state

caused by operation of the

heat exchanger.

Make sure that there is at least

30 mm of space between each

side of the appliance and the

surrounding furniture when

the ambient temperature ex-

ceeds 38°C.

There is too much con-

densed water on the rear

wall of the refrigerator.

Door was opened too fre-

quently.

Open the door only when nec-

essary.

Door was not closed com-

pletely.

Make sure the door is closed

completely.

Stored food was not wrap-

ped.

Wrap food in suitable packag-

ing before storing it in the ap-

pliance.

Door does not open easily. You attempted to re-open

the door immediately after

closing.

Wait a few seconds between

closing and re-opening of the

door.

If the advice does not lead

to the desired result, contact

the nearest Authorised

Service Centre.

6.2 Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the

lighting device. Contact your Authorised

Service Centre.

7. INSTALLATION

WARNING!

Refer to Safety chapters.

www.aeg.com12

7.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

T +16°C to + 43°C

7.2 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the

E.E.C. Directives.

7.3 Installation and replacing

of the CLEANAIR CONTROL

filter

On delivery the carbon filter is in a plastic

bag to preserve performance. The filter

should be placed in the drawer before

the appliance is turned on.

1. Open the drawer.

2. Take the filter out of the plastic bag.

3. Insert the filter in the drawer.

4. Close the drawer.

To get the best performance the carbon

air filter should be changed once every

year.

New active air filters can be purchased

from your local dealer.

The air filter is a consumable

accessory and as such is not

covered by the guarantee.

7.4 Installation of the

appliance and door reversal

Please refer to separate

instructions on installation

(ventilation requirements,

levelling) and door reversal.

8. TECHNICAL DATA

Height 2000 mm

Width 595 mm

Depth 647 mm

Rising time 17 h

Voltage 230 - 240 V

Frequency 50 Hz

The technical information is situated in

the rating plate, on the external or

ENGLISH 13

internal side of the appliance and in the

energy label.

9. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of

appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

www.aeg.com14

TABLE DES MATIÈRES

1. INFORMATIONS DE SÉCURITÉ...............................................................................15

2. CONSIGNES DE SÉCURITÉ......................................................................................17

3. FONCTIONNEMENT................................................................................................19

4. UTILISATION QUOTIDIENNE.................................................................................. 21

5. ENTRETIEN ET NETTOYAGE...................................................................................23

6. EN CAS D'ANOMALIE DE FONCTIONNEMENT.................................................. 24

7. INSTALLATION..........................................................................................................27

8. DONNÉES TECHNIQUES.........................................................................................27

POUR DES RÉSULTATS PARFAITS

Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des

performances irréprochables pour longtemps, en intégrant des technologies

innovantes qui vous simplifient la vie grâce à des caractéristiques que vous ne

trouverez pas forcément sur des appareils ordinaires. Veuillez prendre quelques

instants pour lire cette notice afin d'utiliser au mieux votre appareil.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.aeg.com/webselfservice

Enregistrez votre produit pour obtenir un meilleur service :

www.registeraeg.com

Acheter des accessoires, consommables et pièces de rechange d'origine pour

votre appareil :

www.aeg.com/shop

SERVICE APRÈS-VENTE

Utilisez toujours des pièces d'origine.

Avant de contacter le service après-vente, assurez-vous de disposer des

informations suivantes : Modèle, PNC, numéro de série.

Vous trouverez ces informations sur la plaque signalétique.

Avertissement/Consignes de sécurité

Informations générales et conseils

Informations en matière de protection de l'environnement

Sous réserve de modifications.

1.

INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

pourra être tenu pour responsable des blessures et

dégâts résultant d'une mauvaise installation ou

FRANÇAIS

15

utilisation. Conservez toujours les instructions dans un

lieu sûr et accessible pour vous y référer ultérieurement.

1.1 Sécurité des enfants et des personnes

vulnérables

• Cet appareil peut être utilisé par des enfants âgés

d'au moins 8 ans et par des personnes ayant des

capacités physiques, sensorielles ou mentales réduites

ou dénuées d’expérience ou de connaissance, s'ils (si

elles) sont correctement surveillé(e)s ou si des

instructions relatives à l'utilisation de l'appareil en

toute sécurité leur ont été données et si les risques

encourus ont été appréhendés.

• Ne laissez pas les enfants jouer avec l'appareil.

• Le nettoyage et l'entretien par l'usager ne doivent pas

être effectués par des enfants sans surveillance.

• Ne laissez pas les emballages à la portée des enfants

et jetez-les convenablement.

1.2 Consignes générales de sécurité

• Cet appareil est conçu uniquement pour un usage

domestique et des utilisations telles que :

– dans les bâtiments de ferme, dans des cuisines

réservées aux employés dans des magasins,

bureaux et autres lieux de travail ;

– pour une utilisation privée, par les clients, dans des

hôtels et autres lieux de séjour.

• Veillez à ce que les orifices de ventilation, situés dans

l'enceinte de l'appareil ou dans la structure intégrée,

ne soient pas obstrués.

• N'utilisez aucun dispositif mécanique ou autre

appareil pour accélérer le processus de dégivrage

que ceux recommandés par le fabricant.

• N'endommagez pas le circuit frigorifique.

• N'utilisez pas d'appareils électriques à l'intérieur des

compartiments de conservation des aliments de

l'appareil, sauf s'ils sont du type recommandé par le

fabricant.

www.aeg.com

16

• Ne pulvérisez pas d'eau ni de vapeur pour nettoyer

l'appareil.

• Nettoyez l'appareil avec un chiffon doux humide.

Utilisez uniquement des produits de nettoyage

neutres. N'utilisez pas de produits abrasifs, de

tampons à récurer, de solvants ni d'objets métalliques.

• Ne conservez aucune substance explosive dans cet

appareil, comme des aérosols contenant un produit

inflammable.

• Si le câble d'alimentation est endommagé, il doit être

remplacé par le fabricant, son service après-vente ou

des personnes de qualification similaire afin d'éviter

un danger.

2. CONSIGNES DE SÉCURITÉ

2.1 Installation

AVERTISSEMENT!

L'appareil doit être installé

uniquement par un

professionnel qualifié.

• Retirez l'intégralité de l'emballage et

les boulons de transport.

• N'installez pas et ne branchez pas un

appareil endommagé.

• Suivez scrupuleusement les

instructions d'installation fournies

avec l'appareil.

• Soyez toujours vigilants lorsque vous

déplacez l'appareil car il est lourd.

Utilisez toujours des gants de sécurité

et des chaussures fermées.

• Assurez-vous que l'air circule autour

de l'appareil.

• Lors de la première installation ou

après avoir inversé la porte, attendez

au moins 4 heures avant de brancher

l'appareil sur le secteur. Cela permet

à l'huile de refouler dans le

compresseur.

• Avant toute opération sur l'appareil

(par ex. inversion de la porte),

débranchez la fiche de la prise de

courant.

• N'installez pas l'appareil à proximité

d'un radiateur, d'une cuisinière, d'un

four ou d'une table de cuisson.

• N'installez pas l'appareil dans un

endroit exposé à la lumière directe du

soleil.

• N'installez pas l'appareil dans un

endroit trop humide ou trop froid,

comme une dépendance extérieure,

un garage ou une cave.

• Lorsque vous déplacez l'appareil,

veillez à le soulever par l'avant pour

éviter de rayer le sol.

2.2 Connexion électrique

AVERTISSEMENT!

Risque d'incendie ou

d'électrocution.

• L'appareil doit être relié à la terre.

• Vérifiez que les paramètres figurant

sur la plaque signalétique

correspondent aux données

électriques de votre réseau.

• Utilisez toujours une prise de courant

de sécurité correctement installée.

• N'utilisez pas d'adaptateurs

multiprises ni de rallonges.

• Veillez à ne pas endommager les

composants électriques tels que la

fiche secteur, le câble d'alimentation

ou le compresseur. Contactez le

service après-vente agréé ou un

électricien pour changer les

composants électriques.

FRANÇAIS

17

• Le câble d'alimentation doit rester en

dessous du niveau de la fiche secteur.

• Ne branchez la fiche d'alimentation à

la prise de courant qu'à la fin de

l'installation. Assurez-vous que la

prise de courant est accessible une

fois l'appareil installé.

• Ne tirez jamais sur le câble

d'alimentation pour débrancher

l'appareil. Tirez toujours sur la fiche.

2.3 Usage

AVERTISSEMENT!

Risque de blessures, de

brûlures, d'électrocution ou

d'incendie.

• Ne modifiez pas les caractéristiques

de cet appareil.

• Ne placez aucun appareil électrique

(sorbetière, etc.) dans l'appareil, en

l'absence d'indications du fabricant.

• Veillez à ne pas endommager le

circuit frigorifique. Il contient de

l'isobutane (R600a), un gaz naturel

ayant un niveau élevé de

compatibilité environnementale. Ce

gaz est inflammable.

• Si le circuit frigorifique est

endommagé, assurez-vous de

l'absence de flammes et de sources

d'ignition dans la pièce. Aérez la

pièce.

• Évitez tout contact d'éléments chauds

avec les parties en plastique de

l'appareil.

• Ne placez jamais de boissons

gazeuses dans le congélateur. Cela

engendrerait une pression sur le

récipient de la boisson.

• Ne stockez jamais de gaz ou de

liquide inflammable dans l'appareil.

• Ne placez pas de produits

inflammables ou d'éléments imbibés

de produits inflammables à l'intérieur

ou à proximité de l'appareil, ni sur

celui-ci.

• Ne touchez pas le compresseur ni le

condenseur. Ils sont chauds.

• Ne retirez pas et ne touchez pas les

éléments du compartiment

congélateur avec les mains mouillées

ou humides.

• Ne recongelez jamais un aliment qui a

été décongelé.

• Respectez les instructions de

stockage figurant sur l'emballage des

aliments surgelés.

2.4 Éclairage interne

• Le type d'ampoule utilisé dans cet

appareil n'est pas adapté à l'éclairage

de votre habitation.

2.5 Entretien et nettoyage

AVERTISSEMENT!

Risque de blessure

corporelle ou de dommages

matériels.

• Avant toute opération d'entretien,

éteignez l'appareil et débranchez la

fiche de la prise secteur.

• Cet appareil contient des

hydrocarbures dans son circuit de

réfrigération. L'entretien et la

recharge du circuit de réfrigération

doivent être effectués par un

professionnel qualifié.

• Examinez régulièrement l'écoulement

de l'appareil et si nécessaire,

nettoyez-le. Si l'orifice est bouché,

l'eau provenant du dégivrage

s'écoulera en bas de l'appareil.

2.6 Mise au rebut

AVERTISSEMENT!

Risque de blessure ou

d'asphyxie.

• Débranchez l'appareil de

l'alimentation électrique.

• Coupez le câble d'alimentation et

mettez-le au rebut.

• Retirez la porte pour empêcher les

enfants et les animaux de s'enfermer

dans l'appareil.

• Le circuit frigorifique et les matériaux

d'isolation de cet appareil préservent

la couche d'ozone.

• La mousse isolante contient un gaz

inflammable. Contactez votre service

municipal pour obtenir des

informations sur la marche à suivre

pour mettre l'appareil au rebut.

• N'endommagez pas la partie du

circuit de réfrigération située à

proximité du condenseur thermique.

www.aeg.com

18

3. FONCTIONNEMENT

3.1 Bandeau de commande

1

2

39

4

7

5

6

8

1. Touche de sélection du

compartiment et touche ON/OFF

2. Affichage

3. Touche d'augmentation de la

température

4. Voyant FROSTMATIC

5. Voyant DYNAMICAIR

6. Voyant COOLMATIC

7. Touche DYNAMICAIR

8. Touche Mode

9. Touche de diminution de la

température

Pour modifier la tonalité prédéfinie des

touches, appuyez simultanément sur les

touches d'augmentation et de

diminution de la température pendant

3 secondes. Ce changement est

réversible.

Affichage

B

A

C

A. Voyant du compartiment

B. Mode ECO

C. Indicateur de température du

compartiment

3.2 ON/OFF

Branchez l'appareil sur une prise

électrique.

L'appareil se met automatiquement en

service quand il est branché sur une prise

électrique.

1. Arrêtez l'appareil en appuyant sur la

touche ON/OFF pendant 3

secondes.

2. Mettez l'appareil en marche en

appuyant sur la touche ON/OFF.

3.3 Réglage de la température

1. Sélectionnez le compartiment

réfrigérateur ou le compartiment

congélateur en appuyant sur la

touche de sélection de

compartiment.

2. Appuyez sur la touche

d'augmentation ou de diminution de

la température pour obtenir la

température souhaitée.

Réglages de température par

défaut :

FRANÇAIS 19

• +4 °C dans le réfrigérateur ;

• -18 °C dans le congélateur.

L'indicateur de température indique la

température programmée.

Une fois que la température

maximale ou minimale est

définie, vous ne modifierez

pas le réglage de

température si vous appuyez

de nouveau sur cette

touche. Le signal sonore

retentit.

3.4 Mode Active

Le mode Active vous permet de changer

tous les réglages de l'appareil.

Pour activer le mode Active, ouvrez la

porte et maintenez n'importe quelle

touche enfoncée pendant 1 seconde,

jusqu'à ce qu'un signal sonore retentisse.

Les symboles s'allument.

Le mode Active se désactive

automatiquement au bout

de 30 secondes.

3.5 Fonctions de baisse rapide

de température COOLMATIC

et FROSTMATIC

Les fonctions de baisse rapide de

température font rapidement diminuer la

température à l'intérieur du

compartiment souhaité pour une bonne

conservation des denrées. Nous vous

conseillons d'activer la fonction

COOLMATIC pour refroidir plus

rapidement les produits afin de ne pas

réchauffer les autres denrées qui se

trouvent déjà dans le réfrigérateur, ainsi

que la fonction FROSTMATIC pour faire

baisser rapidement la température du

congélateur, ce qui permet de congeler

rapidement les aliments frais.

Ces fonctions s'arrêtent

automatiquement au bout

d'un certain temps :

• COOLMATIC après

6 heures,

• FROSTMATIC après

52 heures.

1. Pour allumer le voyant COOLMATIC,

appuyez une fois sur la touche de

mode.

Le voyant COOLMATIC s'affiche.

2. Pour allumer simultanément le

voyant COOLMATIC et

FROSTMATIC, appuyez deux fois sur

la touche de mode.

Les voyants COOLMATIC et

FROSTMATIC s'affichent.

3. Pour allumer le voyant FROSTMATIC,

appuyez trois fois sur la touche de

mode.

Le voyant FROSTMATIC s'affiche.

4. Pour désactiver les fonctions,

appuyez sur la touche de mode

jusqu'à ce que les voyants

FROSTMATIC et/ou COOLMATIC

s'éteignent.

3.6 Mode ECO

Le mode ECO est activé si la

température définie pour le

compartiment souhaité est la suivante :

• 4 °C dans le réfrigérateur

• -18 °C dans le congélateur

Le voyant du mode ECO s'affiche

lorsque la fonction est activée.

Ces réglages garantissent

une consommation minimale

d'énergie et une bonne

conversation des aliments.

Le mode ECO est désactivé

tant que la fonction

DYNAMICAIR est activée.

3.7 Fonction DYNAMICAIR

L'activation de la fonction DYNAMICAIR

augmente la consommation d'électricité

(reportez-vous au chapitre « Utilisation

quotidienne »).

La fonction DYNAMICAIR

peut être activée

automatiquement

1. Pour activer la fonction

manuellement, appuyez sur la touche

DYNAMICAIR jusqu'à ce que le

voyant correspondant s'allume.

Le voyant DYNAMICAIR s'affiche.

www.aeg.com

20

La pagina si sta caricando...

AEG RCB83826TX Manuale utente

AEG RCB83826TX Manuale utente

in altre lingue

Documenti correlati

Altri documenti