AEG RCB83826TX Manuale utente

Categoria
Frigoriferi
Tipo
Manuale utente
USER
MANUAL
EN User Manual 2
Fridge Freezer
FR Notice d'utilisation 15
Réfrigérateur/congélateur
DE Benutzerinformation 29
Kühl - Gefrierschrank
IT Istruzioni per l’uso 44
Frigo-Congelatore
ES Manual de instrucciones 58
Frigorífico-congelador
RCB83826TX
CONTENTS
1. SAFETY INFORMATION.............................................................................................2
2. SAFETY INSTRUCTIONS.............................................................................................4
3. OPERATION.................................................................................................................5
4. DAILY USE....................................................................................................................7
5. CARE AND CLEANING...............................................................................................9
6. TROUBLESHOOTING............................................................................................... 10
7. INSTALLATION..........................................................................................................12
8. TECHNICAL DATA.................................................................................................... 13
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have created it to give you
impeccable performance for many years, with innovative technologies that help
make life simpler features you might not find on ordinary appliances. Please
spend a few minutes reading to get the very best from it.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.aeg.com/webselfservice
Register your product for better service:
www.registeraeg.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.aeg.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
1.
SAFETY INFORMATION
Before the installation and use of the appliance,
carefully read the supplied instructions. The
manufacturer is not responsible for any injuries or
damages that are the result of incorrect installation or
usage. Always keep the instructions in a safe and
accessible location for future reference.
www.aeg.com
2
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning the use of the appliance in a
safe way and understand the hazards involved.
Do not let children play with the appliance.
Children shall not carry out cleaning and user
maintenance of the appliance without supervision.
Keep all packaging away from children and dispose of
it appropriately.
1.2 General Safety
This appliance is intended to be used in household
and similar applications such as:
Farm houses; staff kitchen areas in shops, offices
and other working environments
By clients in hotels, motels, bed and breakfast and
other residential type environments
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
ENGLISH
3
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging and the
transit bolts.
Do not install or use a damaged
appliance.
Follow the installation instruction
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Make sure the air can circulate around
the appliance.
At first installation or after reversing
the door wait at least 4 hours before
connecting the appliance to the
power supply. This is to allow the oil
to flow back in the compressor.
Before carrying out any operations on
the appliance (e.g. reversing the
door), remove the plug from the
power socket.
Do not install the appliance close to
radiators or cookers, ovens or hobs.
Do not install the appliance where
there is direct sunlight.
Do not install this appliance in areas
that are too humid or too cold, such
as the construction appendices,
garages or wine cellars.
When you move the appliance, lift it
by the front edge to avoid scratching
the floor.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
The appliance must be earthed.
Make sure that the parameters on the
rating plate are compatible with the
electrical ratings of the mains power
supply.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the electrical components (e.g. mains
plug, mains cable, compressor).
Contact the Authorised Service
Centre or an electrician to change the
electrical components.
The mains cable must stay below the
level of the mains plug.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
2.3 Use
WARNING!
Risk of injury, burns,
electrical shock or fire.
Do not change the specification of
this appliance.
Do not put electrical appliances (e.g.
ice cream makers) in the appliance
unless they are stated applicable by
the manufacturer.
Be careful not to cause damage to
the refrigerant circuit. It contains
isobutane (R600a), a natural gas with a
high level of environmental
compatibility. This gas is flammable.
If damage occurs to the refrigerant
circuit, make sure that there are no
flames and sources of ignition in the
room. Ventilate the room.
Do not let hot items to touch the
plastic parts of the appliance.
Do not put soft drinks in the freezer
compartment. This will create
pressure on the drink container.
www.aeg.com
4
Do not store flammable gas and
liquid in the appliance.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not touch the compressor or the
condenser. They are hot.
Do not remove or touch items from
the freezer compartment if your hands
are wet or damp.
Do not freeze again food that has
been thawed.
Obey the storage instructions on the
packaging of frozen food.
2.4 Internal light
The type of lamp used for this
appliance is not suitable for
household room illumination
2.5 Care and cleaning
WARNING!
Risk of injury or damage to
the appliance.
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
This appliance contains hydrocarbons
in the cooling unit. Only a qualified
person must do the maintenance and
the recharging of the unit.
Regularly examine the drain of the
appliance and if necessary, clean it. If
the drain is blocked, defrosted water
collects in the bottom of the
appliance.
2.6 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door to prevent children
and pets to be closed inside of the
appliance.
The refrigerant circuit and the
insulation materials of this appliance
are ozone-friendly.
The insulation foam contains
flammable gas. Contact your
municipal authority for information on
how to discard the appliance
correctly.
Do not cause damage to the part of
the cooling unit that is near the heat
exchanger.
3.
OPERATION
3.1 Control panel
1
2
39
4
7
5
6
8
1. Compartment select key and
ON/OFF key
2. Display
3. Temperature warmer key
4. FROSTMATIC indicator
5. DYNAMICAIR indicator
6. COOLMATIC indicator
7. DYNAMICAIR key
8. Mode key
9. Temperature colder key
ENGLISH 5
It is possible to change predefined
sound of buttons by pressing together
temperature warmer key and
temperature colder key for 3 seconds.
Change is reversible.
Display
B
A
C
A. Compartment indicator
B. ECO mode
C. Temperature compartment indicator
3.2 ON/OFF
Plug the appliance into electrical mains
socket.
Appliance automatically turns ON when
plugged into an electrical mains socket.
1. Turn OFF the appliance by pressing
the ON/OFF key for 3 seconds.
2. Turn ON the appliance by pressing
the ON/OFF key.
3.3 Temperature regulation
1. Select the fridge or freezer
compartment by pressing the
compartment select key.
2. Press the temperature warmer or
colder key to set the temperature as
desire.
The default temperature settings:
+4°C for fridge compartment;
-18°C for freezer compartment.
The temperature indicator shows the set
temperature.
Once the maximum or
minimum temperature is set,
pressing the key again will
not change temperature
setting. The audible sound is
heard.
3.4 Active mode
Active mode allows to change any
setting in the appliance.
To switch on active mode, open the door
or hold any button for 1 second until the
audible signal is heard.
The icons illuminate.
The active mode switches off
automatically after 30
seconds.
3.5 Temperature boost
functions COOLMATIC and
FROSTMATIC
The temperature boost functions rapidly
decrease the temperature in desired
compartment for proper food storage
reason. We suggest activating the
COOLMATIC to chill the products more
rapidly to avoid warming the other food
which is already in the refrigerator and
FROSTMATIC function to provide rapid
decreasing the temperature in the
freezer, allowing fresh food to freeze
quickly.
This functions stop
automatically as follows:
COOLMATIC after 6
hours,
FROSTMATIC after 52
hours.
1. To switch on the COOLMATIC press
mode key once.
The COOLMATIC indicator appears.
www.aeg.com
6
2. To switch on the COOLMATIC and
FROSTMATIC together press mode
key twice.
The COOLMATIC and FROSTMATIC
indicators appear.
3. To switch on the FROSTMATIC press
mode key three times.
The FROSTMATIC indicator appears.
4. To deactivate the functions press
mode key until the FROSTMATIC
and/or COOLMATIC indicators
switch off.
3.6 ECO mode
The ECO mode is activated if the set
temperature for desired compartment is
as follows :
4°C for fridge compartment;
-18°C for freezer compartment
The ECO mode indicator is shown when
the function is activated.
This settings guarantee
minimum energy
consumption and proper
food preservation
characteristics.
The ECO mode is
deactivated as long as the
DYNAMICAIR function is
switched on.
3.7 DYNAMICAIR function
The activation of the DYNAMICAIR
function increases energy consumption
(refer to "Daily use").
The DYNAMICAIR function
can be activated
automatically
1. To switch on the function manually
press DYNAMICAIR key until the
corresponding indicator illuminate.
The DYNAMICAIR indicator appears.
2. To switch off the function press
DYNAMICAIR key until the
DYNAMICAIR indicator switches off.
3.8 DEMO mode
DEMO mode allows to operate the panel
without activating the appliance.
To activate the mode, press mode key
9 times, until dE appears on the
display.
To deactivate the mode, press mode
key for approximately 10 seconds.
The appliance returns to regular
mode.
3.9 High temperature alarm
An increase in the temperature in the
freezer compartment (for example due to
an earlier power failure or door is open)
is indicated by:
flashing the compartment select key
and compartment indicator;
acoustic buzzer.
To reset the alarm press any key.
The buzzer switches off.
The alarm indicators continue to flash
until the normal conditions are restored.
3.10 Door open alarm
An acoustic alarm will sound if the door
is left open for a few minutes. The door
open alarm conditions are indicated by:
flashing the compartment select key
and compartment indicator;
acoustic buzzer.
When normal conditions are restored
(door closed), the alarm will stop. During
the alarm, the buzzer can be switched off
by pressing any key.
4.
DAILY USE
WARNING!
Refer to Safety chapters.
ENGLISH 7
4.1 Initial power on
CAUTION!
Before inserting the power
plug in to the outlet and
switching on the cabinet for
the first time, leave the
appliance standing upright
for at least 4 hours. This will
assure a sufficient amount of
time for the oil to return to
the compressor. Otherwise
the compressor or electronic
components may sustain
damage.
4.2 Storage of frozen food
When first starting-up or after a period
out of use, before putting the products
in the compartment let the appliance run
at least 2 hours with the FROSTMATIC
function turned on. The freezer drawers
ensure that it is quick and easy to find
the food package you want. If large
quantities of food are to be stored,
remove all drawers except for the
bottom drawer which needs to be in
place to provide good air circulation. On
all shelves it is possible to place food
that protrude until 15 mm from the door.
4.3 Freezing fresh food
The freezer compartment is suitable for
freezing fresh food and storing frozen
and deep-frozen food for a long time.
To freeze small amount of fresh food it is
not necessary to change the present
setting.
To freeze fresh food activate the
FROSTMATIC function at least 24 hours
before placing the food to be frozen in
the freezer compartment.
Place the food to be frozen in the top
compartment.
The maximum amount of food that can
be frozen in 24 hours is specified on the
rating plate.
The freezing process lasts 24 hours:
during this period do not add other food
to be frozen.
When the freezing process is complete,
return to the required temperature (see
"FROSTMATIC Function").
In this condition, the
refrigerator compartment
temperature might drop
below 0°C. If this occurs
reset the temperature
regulator to a warmer
setting.
4.4 Storing food in a fridge
compartment
Cover or wrap the food, particularly if it
has a strong flavour.
Position the food so that air can circulate
freely around it.
Keep the food on all shelves no closer
than 20 mm from the rear wall and 15
mm from the door.
4.5 FreshBox module
The drawer inside the module is suitable
for storing fresh food like fish, meat,
seafood, because the temperature is
lower here than in the rest of the fridge.
CAUTION!
Before placing or removing
the FreshBox module inside
the appliance, pull out the
MaxiBox drawer and glass
cover.
The FreshBox module is equipped with
runners. At the time of its removal from
the fridge compartment pull the module
towards yourself and remove the basket
by tilting its front downwards.
www.aeg.com
8
4.6 DYNAMICAIR
The refrigerator compartment is
equipped with a device that allows rapid
cooling of food and keeps a more
uniform temperature in the
compartment.
This device activates automatically when
needed, for example for a quick
temperature recovery after door opening
or when the ambient temperature is
high.
It is possible to switch on the device
manually when needed (refer to
"DYNAMICAIR function").
5. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
5.1 Cleaning the interior
Before using the appliance for the first
time, the interior and all internal
accessories should be washed with
lukewarm water and some neutral soap
to remove the typical smell of a brand-
new product, then dried thoroughly.
CAUTION!
Do not use detergents,
abrasive powders, chlorine
or oil-based cleaners as they
will damage the finish.
5.2 Periodic cleaning
CAUTION!
Do not pull, move or
damage any pipes and/or
cables inside the cabinet.
CAUTION!
Take care of not to damage
the cooling system.
CAUTION!
When moving the cabinet,
lift it by the front edge to
avoid scratching the floor.
The equipment has to be cleaned
regularly:
1. Clean the inside and accessories with
lukewarm water and some neutral
soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of
the appliance with a brush.
This operation will improve the
performance of the appliance and
save electricity consumption.
The lowest shelf, dividing the cooler
compartment from the compartment can
be removed only for cleaning. To remove
pull out the shelf straight.
To make sure fully
functionality of the FreshBox
compartment the lowest
shelf and cover plates must
be put back in their original
position after cleaning.
The cover plates above the drawers in
the compartment can be taken out for
cleaning.
5.3 Defrosting
Your appliance is frost free. This means
that there is no build up of frost when it
ENGLISH
9
is in operation, neither on the internal
walls nor on the foods. The absence of
frost is due to the continuous circulation
of cold air inside the compartment,
driven by an automatically controlled fan.
The defrost water drains out through a
trough into a special container at the
back of the appliance, over the motor
compressor, where it evaporates.
It is important to periodically clean the
defrost water drain hole in the middle of
the refrigerator compartment channel to
prevent the water overflowing and
dripping onto the food inside.
5.4 Periods of non-operation
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Clean the appliance and all
accessories.
4. Leave the door/doors open to
prevent unpleasant smells.
6. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
6.1 What to do if...
Problem Possible cause Solution
The appliance is noisy. The appliance is not sup-
ported properly.
Check if the appliance stands
stable.
Audible or visual alarm is
on.
The cabinet has been re-
cently switched on or the
temperature is still too
high.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
The temperature in the ap-
pliance is too high.
Refer to "Door Open
Alarm"or "High Temperature
Alarm".
The lamp does not work. The lamp is in stand-by
mode.
Close and open the door.
The lamp does not work. The lamp is defective. Contact the nearest Author-
ised Service Centre.
The compressor operates
continually.
Temperature is set incor-
rectly.
Refer to "Operation"/"Control
panel" chapter.
www.aeg.com10
Problem Possible cause Solution
Many food products were
put in at the same time.
Wait a few hours and then
check the temperature again.
The room temperature is
too high.
Refer to climate class chart on
the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool to
room temperature before stor-
ing.
The FROSTMATIC function
is switched on.
Refer to "FROSTMATIC func-
tion".
The COOLMATIC function
is switched on.
Refer to "COOLMATIC func-
tion".
The compressor does not
start immediately after
pressing the FROSTMATIC
or after changing the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
some time.
The compressor does not
start immediately after
pressing the COOLMATIC
or after changing the tem-
perature.
This is normal, no error has
occurred.
The compressor starts after
some time.
Water flows inside the re-
frigerator.
The water outlet is clog-
ged.
Clean the water outlet.
Food products prevent wa-
ter from flowing into the
water collector.
Make sure that food products
do not touch the rear plate.
Water flows on the floor. The melting water outlet is
not connected to the evap-
orative tray above the com-
pressor.
Attach the melting water out-
let to the evaporative tray.
Temperature cannot be set. The FROSTMATIC or
COOLMATIC function is
switched on.
Switch off FROSTMATIC or
COOLMATIC manually, or wait
until the function resets auto-
matically to set the tempera-
ture. Refer to "FROSTMATIC
or COOLMATIC function".
DEMO appears on the dis-
play.
The appliance is in demon-
stration mode.
Keep the mode key pressed
for approximately 10 seconds
until a long sound is heard and
display shuts off for a short
time.
ENGLISH 11
Problem Possible cause Solution
The temperature in the ap-
pliance is too low/too high.
The temperature regulator
is not set correctly.
Set a higher/lower tempera-
ture.
The food products temper-
ature is too high.
Let the food products temper-
ature decrease to room tem-
perature before storage.
Many food products were
stored at the same time.
Store less food products at the
same time.
The FROSTMATIC function
is switched on.
Refer to "FROSTMATIC func-
tion".
The COOLMATIC function
is switched on.
Refer to "COOLMATIC func-
tion".
Side panels of the appli-
ance are warm.
This is a normal state
caused by operation of the
heat exchanger.
Make sure that there is at least
30 mm of space between each
side of the appliance and the
surrounding furniture when
the ambient temperature ex-
ceeds 38°C.
There is too much con-
densed water on the rear
wall of the refrigerator.
Door was opened too fre-
quently.
Open the door only when nec-
essary.
Door was not closed com-
pletely.
Make sure the door is closed
completely.
Stored food was not wrap-
ped.
Wrap food in suitable packag-
ing before storing it in the ap-
pliance.
Door does not open easily. You attempted to re-open
the door immediately after
closing.
Wait a few seconds between
closing and re-opening of the
door.
If the advice does not lead
to the desired result, contact
the nearest Authorised
Service Centre.
6.2 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
7. INSTALLATION
WARNING!
Refer to Safety chapters.
www.aeg.com12
7.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
7.2 Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
The manufacturer declines all
responsibility if the above safety
precautions are not observed.
This appliance complies with the
E.E.C. Directives.
7.3 Installation and replacing
of the CLEANAIR CONTROL
filter
On delivery the carbon filter is in a plastic
bag to preserve performance. The filter
should be placed in the drawer before
the appliance is turned on.
1. Open the drawer.
2. Take the filter out of the plastic bag.
3. Insert the filter in the drawer.
4. Close the drawer.
To get the best performance the carbon
air filter should be changed once every
year.
New active air filters can be purchased
from your local dealer.
The air filter is a consumable
accessory and as such is not
covered by the guarantee.
7.4 Installation of the
appliance and door reversal
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
8. TECHNICAL DATA
Height 2000 mm
Width 595 mm
Depth 647 mm
Rising time 17 h
Voltage 230 - 240 V
Frequency 50 Hz
The technical information is situated in
the rating plate, on the external or
ENGLISH 13
internal side of the appliance and in the
energy label.
9. ENVIRONMENTAL CONCERNS
Recycle materials with the symbol .
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
www.aeg.com14
TABLE DES MATIÈRES
1. INFORMATIONS DE SÉCURITÉ...............................................................................15
2. CONSIGNES DE SÉCURITÉ......................................................................................17
3. FONCTIONNEMENT................................................................................................19
4. UTILISATION QUOTIDIENNE.................................................................................. 21
5. ENTRETIEN ET NETTOYAGE...................................................................................23
6. EN CAS D'ANOMALIE DE FONCTIONNEMENT.................................................. 24
7. INSTALLATION..........................................................................................................27
8. DONNÉES TECHNIQUES.........................................................................................27
POUR DES RÉSULTATS PARFAITS
Merci d'avoir choisi ce produit AEG. Nous l'avons conçu pour qu'il vous offre des
performances irréprochables pour longtemps, en intégrant des technologies
innovantes qui vous simplifient la vie grâce à des caractéristiques que vous ne
trouverez pas forcément sur des appareils ordinaires. Veuillez prendre quelques
instants pour lire cette notice afin d'utiliser au mieux votre appareil.
Visitez notre site Internet pour :
Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :
www.aeg.com/webselfservice
Enregistrez votre produit pour obtenir un meilleur service :
www.registeraeg.com
Acheter des accessoires, consommables et pièces de rechange d'origine pour
votre appareil :
www.aeg.com/shop
SERVICE APRÈS-VENTE
Utilisez toujours des pièces d'origine.
Avant de contacter le service après-vente, assurez-vous de disposer des
informations suivantes : Modèle, PNC, numéro de série.
Vous trouverez ces informations sur la plaque signalétique.
Avertissement/Consignes de sécurité
Informations générales et conseils
Informations en matière de protection de l'environnement
Sous réserve de modifications.
1.
INFORMATIONS DE SÉCURITÉ
Avant d'installer et d'utiliser cet appareil, lisez
soigneusement les instructions fournies. Le fabricant ne
pourra être tenu pour responsable des blessures et
dégâts résultant d'une mauvaise installation ou
FRANÇAIS
15
utilisation. Conservez toujours les instructions dans un
lieu sûr et accessible pour vous y référer ultérieurement.
1.1 Sécurité des enfants et des personnes
vulnérables
Cet appareil peut être utilisé par des enfants âgés
d'au moins 8 ans et par des personnes ayant des
capacités physiques, sensorielles ou mentales réduites
ou dénuées d’expérience ou de connaissance, s'ils (si
elles) sont correctement surveillé(e)s ou si des
instructions relatives à l'utilisation de l'appareil en
toute sécurité leur ont été données et si les risques
encourus ont été appréhendés.
Ne laissez pas les enfants jouer avec l'appareil.
Le nettoyage et l'entretien par l'usager ne doivent pas
être effectués par des enfants sans surveillance.
Ne laissez pas les emballages à la portée des enfants
et jetez-les convenablement.
1.2 Consignes générales de sécurité
Cet appareil est conçu uniquement pour un usage
domestique et des utilisations telles que :
dans les bâtiments de ferme, dans des cuisines
réservées aux employés dans des magasins,
bureaux et autres lieux de travail ;
pour une utilisation privée, par les clients, dans des
hôtels et autres lieux de séjour.
Veillez à ce que les orifices de ventilation, situés dans
l'enceinte de l'appareil ou dans la structure intégrée,
ne soient pas obstrués.
N'utilisez aucun dispositif mécanique ou autre
appareil pour accélérer le processus de dégivrage
que ceux recommandés par le fabricant.
N'endommagez pas le circuit frigorifique.
N'utilisez pas d'appareils électriques à l'intérieur des
compartiments de conservation des aliments de
l'appareil, sauf s'ils sont du type recommandé par le
fabricant.
www.aeg.com
16
Ne pulvérisez pas d'eau ni de vapeur pour nettoyer
l'appareil.
Nettoyez l'appareil avec un chiffon doux humide.
Utilisez uniquement des produits de nettoyage
neutres. N'utilisez pas de produits abrasifs, de
tampons à récurer, de solvants ni d'objets métalliques.
Ne conservez aucune substance explosive dans cet
appareil, comme des aérosols contenant un produit
inflammable.
Si le câble d'alimentation est endommagé, il doit être
remplacé par le fabricant, son service après-vente ou
des personnes de qualification similaire afin d'éviter
un danger.
2. CONSIGNES DE SÉCURITÉ
2.1 Installation
AVERTISSEMENT!
L'appareil doit être installé
uniquement par un
professionnel qualifié.
Retirez l'intégralité de l'emballage et
les boulons de transport.
N'installez pas et ne branchez pas un
appareil endommagé.
Suivez scrupuleusement les
instructions d'installation fournies
avec l'appareil.
Soyez toujours vigilants lorsque vous
déplacez l'appareil car il est lourd.
Utilisez toujours des gants de sécurité
et des chaussures fermées.
Assurez-vous que l'air circule autour
de l'appareil.
Lors de la première installation ou
après avoir inversé la porte, attendez
au moins 4 heures avant de brancher
l'appareil sur le secteur. Cela permet
à l'huile de refouler dans le
compresseur.
Avant toute opération sur l'appareil
(par ex. inversion de la porte),
débranchez la fiche de la prise de
courant.
N'installez pas l'appareil à proximité
d'un radiateur, d'une cuisinière, d'un
four ou d'une table de cuisson.
N'installez pas l'appareil dans un
endroit exposé à la lumière directe du
soleil.
N'installez pas l'appareil dans un
endroit trop humide ou trop froid,
comme une dépendance extérieure,
un garage ou une cave.
Lorsque vous déplacez l'appareil,
veillez à le soulever par l'avant pour
éviter de rayer le sol.
2.2 Connexion électrique
AVERTISSEMENT!
Risque d'incendie ou
d'électrocution.
L'appareil doit être relié à la terre.
Vérifiez que les paramètres figurant
sur la plaque signalétique
correspondent aux données
électriques de votre réseau.
Utilisez toujours une prise de courant
de sécurité correctement installée.
N'utilisez pas d'adaptateurs
multiprises ni de rallonges.
Veillez à ne pas endommager les
composants électriques tels que la
fiche secteur, le câble d'alimentation
ou le compresseur. Contactez le
service après-vente agréé ou un
électricien pour changer les
composants électriques.
FRANÇAIS
17
Le câble d'alimentation doit rester en
dessous du niveau de la fiche secteur.
Ne branchez la fiche d'alimentation à
la prise de courant qu'à la fin de
l'installation. Assurez-vous que la
prise de courant est accessible une
fois l'appareil installé.
Ne tirez jamais sur le câble
d'alimentation pour débrancher
l'appareil. Tirez toujours sur la fiche.
2.3 Usage
AVERTISSEMENT!
Risque de blessures, de
brûlures, d'électrocution ou
d'incendie.
Ne modifiez pas les caractéristiques
de cet appareil.
Ne placez aucun appareil électrique
(sorbetière, etc.) dans l'appareil, en
l'absence d'indications du fabricant.
Veillez à ne pas endommager le
circuit frigorifique. Il contient de
l'isobutane (R600a), un gaz naturel
ayant un niveau élevé de
compatibilité environnementale. Ce
gaz est inflammable.
Si le circuit frigorifique est
endommagé, assurez-vous de
l'absence de flammes et de sources
d'ignition dans la pièce. Aérez la
pièce.
Évitez tout contact d'éléments chauds
avec les parties en plastique de
l'appareil.
Ne placez jamais de boissons
gazeuses dans le congélateur. Cela
engendrerait une pression sur le
récipient de la boisson.
Ne stockez jamais de gaz ou de
liquide inflammable dans l'appareil.
Ne placez pas de produits
inflammables ou d'éléments imbibés
de produits inflammables à l'intérieur
ou à proximité de l'appareil, ni sur
celui-ci.
Ne touchez pas le compresseur ni le
condenseur. Ils sont chauds.
Ne retirez pas et ne touchez pas les
éléments du compartiment
congélateur avec les mains mouillées
ou humides.
Ne recongelez jamais un aliment qui a
été décongelé.
Respectez les instructions de
stockage figurant sur l'emballage des
aliments surgelés.
2.4 Éclairage interne
Le type d'ampoule utilisé dans cet
appareil n'est pas adapté à l'éclairage
de votre habitation.
2.5 Entretien et nettoyage
AVERTISSEMENT!
Risque de blessure
corporelle ou de dommages
matériels.
Avant toute opération d'entretien,
éteignez l'appareil et débranchez la
fiche de la prise secteur.
Cet appareil contient des
hydrocarbures dans son circuit de
réfrigération. L'entretien et la
recharge du circuit de réfrigération
doivent être effectués par un
professionnel qualifié.
Examinez régulièrement l'écoulement
de l'appareil et si nécessaire,
nettoyez-le. Si l'orifice est bouché,
l'eau provenant du dégivrage
s'écoulera en bas de l'appareil.
2.6 Mise au rebut
AVERTISSEMENT!
Risque de blessure ou
d'asphyxie.
Débranchez l'appareil de
l'alimentation électrique.
Coupez le câble d'alimentation et
mettez-le au rebut.
Retirez la porte pour empêcher les
enfants et les animaux de s'enfermer
dans l'appareil.
Le circuit frigorifique et les matériaux
d'isolation de cet appareil préservent
la couche d'ozone.
La mousse isolante contient un gaz
inflammable. Contactez votre service
municipal pour obtenir des
informations sur la marche à suivre
pour mettre l'appareil au rebut.
N'endommagez pas la partie du
circuit de réfrigération située à
proximité du condenseur thermique.
www.aeg.com
18
3. FONCTIONNEMENT
3.1 Bandeau de commande
1
2
39
4
7
5
6
8
1. Touche de sélection du
compartiment et touche ON/OFF
2. Affichage
3. Touche d'augmentation de la
température
4. Voyant FROSTMATIC
5. Voyant DYNAMICAIR
6. Voyant COOLMATIC
7. Touche DYNAMICAIR
8. Touche Mode
9. Touche de diminution de la
température
Pour modifier la tonalité prédéfinie des
touches, appuyez simultanément sur les
touches d'augmentation et de
diminution de la température pendant
3 secondes. Ce changement est
réversible.
Affichage
B
A
C
A. Voyant du compartiment
B. Mode ECO
C. Indicateur de température du
compartiment
3.2 ON/OFF
Branchez l'appareil sur une prise
électrique.
L'appareil se met automatiquement en
service quand il est branché sur une prise
électrique.
1. Arrêtez l'appareil en appuyant sur la
touche ON/OFF pendant 3
secondes.
2. Mettez l'appareil en marche en
appuyant sur la touche ON/OFF.
3.3 Réglage de la température
1. Sélectionnez le compartiment
réfrigérateur ou le compartiment
congélateur en appuyant sur la
touche de sélection de
compartiment.
2. Appuyez sur la touche
d'augmentation ou de diminution de
la température pour obtenir la
température souhaitée.
Réglages de température par
défaut :
FRANÇAIS 19
+4 °C dans le réfrigérateur ;
-18 °C dans le congélateur.
L'indicateur de température indique la
température programmée.
Une fois que la température
maximale ou minimale est
définie, vous ne modifierez
pas le réglage de
température si vous appuyez
de nouveau sur cette
touche. Le signal sonore
retentit.
3.4 Mode Active
Le mode Active vous permet de changer
tous les réglages de l'appareil.
Pour activer le mode Active, ouvrez la
porte et maintenez n'importe quelle
touche enfoncée pendant 1 seconde,
jusqu'à ce qu'un signal sonore retentisse.
Les symboles s'allument.
Le mode Active se désactive
automatiquement au bout
de 30 secondes.
3.5 Fonctions de baisse rapide
de température COOLMATIC
et FROSTMATIC
Les fonctions de baisse rapide de
température font rapidement diminuer la
température à l'intérieur du
compartiment souhaité pour une bonne
conservation des denrées. Nous vous
conseillons d'activer la fonction
COOLMATIC pour refroidir plus
rapidement les produits afin de ne pas
réchauffer les autres denrées qui se
trouvent déjà dans le réfrigérateur, ainsi
que la fonction FROSTMATIC pour faire
baisser rapidement la température du
congélateur, ce qui permet de congeler
rapidement les aliments frais.
Ces fonctions s'arrêtent
automatiquement au bout
d'un certain temps :
COOLMATIC après
6 heures,
FROSTMATIC après
52 heures.
1. Pour allumer le voyant COOLMATIC,
appuyez une fois sur la touche de
mode.
Le voyant COOLMATIC s'affiche.
2. Pour allumer simultanément le
voyant COOLMATIC et
FROSTMATIC, appuyez deux fois sur
la touche de mode.
Les voyants COOLMATIC et
FROSTMATIC s'affichent.
3. Pour allumer le voyant FROSTMATIC,
appuyez trois fois sur la touche de
mode.
Le voyant FROSTMATIC s'affiche.
4. Pour désactiver les fonctions,
appuyez sur la touche de mode
jusqu'à ce que les voyants
FROSTMATIC et/ou COOLMATIC
s'éteignent.
3.6 Mode ECO
Le mode ECO est activé si la
température définie pour le
compartiment souhaité est la suivante :
4 °C dans le réfrigérateur
-18 °C dans le congélateur
Le voyant du mode ECO s'affiche
lorsque la fonction est activée.
Ces réglages garantissent
une consommation minimale
d'énergie et une bonne
conversation des aliments.
Le mode ECO est désactivé
tant que la fonction
DYNAMICAIR est activée.
3.7 Fonction DYNAMICAIR
L'activation de la fonction DYNAMICAIR
augmente la consommation d'électricité
(reportez-vous au chapitre « Utilisation
quotidienne »).
La fonction DYNAMICAIR
peut être activée
automatiquement
1. Pour activer la fonction
manuellement, appuyez sur la touche
DYNAMICAIR jusqu'à ce que le
voyant correspondant s'allume.
Le voyant DYNAMICAIR s'affiche.
www.aeg.com
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

AEG RCB83826TX Manuale utente

Categoria
Frigoriferi
Tipo
Manuale utente