Freedom Stick/Freedom Stick Pack QRG EN
2
The Freedom Stick and Freedom Stick Pack Quick Reference Guide (QRG) has basic
product information such as mounting, menu options, and DMX values. Download the
User Manual from www.chauvetlighting.com for more details.
The information and specifications here are subject to change without notice. Chauvet
reserves to right to revise or reissue this QRG.
Warranty
Safety Notes
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND
CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: https://www.chauvetdj.com/warranty/
For Customers in the United Kingdom, Republic of Ireland, Bel
Luxembourg, France, and Germany: https://www.chauvetdj.eu/warranty/.
Chauvet warrants that this product shall be free from defects in material and
workmanship under normal use, for t
he period specified in, and subject to the
exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable.
To exercise rights under this warranty
, you must provide proof of purchase in the form
of an original sales receipt from an authorized dealer that shows the product name and
date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED
WARRANTIES. This warranty gives you specific legal rights. You m
ay also have
other rights that vary from state to state and country to country. This warranty is valid
only in the United States, United Kingdom, Republic of Ireland, Belgium, the
Netherlands, Luxembourg, France, Germany and Mexico. For warranty terms in o
countries, please consult your local distributor.
These Safety Notes include important information about product mounting, use, and
maintenance.
•
This product is not intended for permanent installation.
• ONLY connect this product to a grounded and protected circuit.
• DISCONNECT from power before cleaning or replacing the fuse.
• DO NOT look at the light source when the product is on.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power by pulling on the cord.
• When mounting this product overhead, ALWAYS use a safety cable.
• DO NOT allow flammable materials close to the product when it is operating.
• DO NOT touch the product’s housing when it is on because it will be hot.
• DO NOT operate this product if the housing, lenses, or cables appear damaged.
• The voltage of the outlet to which you are connecting this product must be within
the range stated on the decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do
not expose this product to rain or moisture.
• Always mount this product in a location with adequate ventilation, at least 20 in
(50 cm) from adjacent surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer or rheostat.
• Replace the fuse with the same type and rating.
• ONLY carry this product by the base.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this
product at higher temperatures.
• In the event of a serious operating problem, stop using immediately.
• DO NOT open this product. It contains no user-serviceable parts.
• This product is neither a toy nor a weapon.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by unplugging