Patek Philippe 7042 Guida utente

MANUALLY WOUND MOVEMENTS

MANUALLYWOUND

MOVEMENTS

CALIBERS 215, 215 PS, 215 PS LU, 25-21 REC

English ........................ 3

Français ..................... 23

Deutsch ..................... 43

Italiano ....................... 63

Español ...................... 83

.....................103

.................. 123

................. 143

CALIBERS

   PS

 PSLU   REC

MANUALLY WOUND MOVEMENTS

English

CALIBERS

   PS

 PSLU   REC

MANUALLY WOUND MOVEMENTS

English

5

Remaining faithful to the spirit of the art of fine

watchmaking, Patek Philippe has always attached a

great deal of importance to the quality of its move-

ments. The brand is part of a small circle of authentic

manufacturers who all develop and manufacture

their own calibers. A demanding process that com-

bines ancestral savoir-faire with avant-garde design,

manual expertise, and cutting-edge technology.

Patek Philippe manual winding movements reflect

one of the key principles of watch manufacturing:

integrating maximum complexity into minimum

dimensions to create a case that is exceptionally slim

and timelessly elegant. The epitome of fine horolog-

ical construction, Patek Philippe’s movements are

also distinguished by their refined finishes.

76

DISPLAYS

Hour hand

Minute hand

CROWN

1 Manual winding

2 Setting the time

MOVEMENT

• Caliber 215

• Manual winding

• Diameter: 21.90 mm

• Height: 2.55 mm

• Number of parts: 130

• Number of jewels: 18

• Power reserve:

min. 44 hours

• Balance: Gyromax®

• Frequency:

28,800 semi-oscillations/hour (4 Hz)

• Balance spring: Spiromax®

• Patek Philippe Seal

98

DISPLAYS

Hour hand

Minute hand

Subsidiary dial:

Small seconds

CROWN

1 Manual winding

2 Setting the time

MOVEMENT

• Caliber 215 PS

• Manual winding

• Diameter: 21.90 mm

• Height: 2.55 mm

• Number of parts: 130

• Number of jewels: 18

• Power reserve:

min. 44 hours

• Balance: Gyromax®

• Frequency:

28,800 semi-oscillations/hour (4 Hz)

• Balance spring: Spiromax®

• Patek Philippe Seal

1110

DISPLAYS

Hour hand

Minute hand

Subsidiary dial:

Small seconds

Aperture:

Moon phases

CROWN

1 Manual winding

2 Setting the time

CORRECTION

PUSHPIECE

Moon-phase correction

MOVEMENT

• Caliber 215 PS LU

• Manual winding

• Diameter: 21.90 mm

• Height: 3 mm

• Number of parts: 157

• Number of jewels: 18

• Power reserve:

min. 39 hours – max. 44 hours

• Balance: Gyromax®

• Frequency:

28,800 semi-oscillations/hour (4 Hz)

• Balance spring: Spiromax®

• Patek Philippe Seal

1312

DISPLAYS

Hour hand

Minute hand

CROWN

1 Manual winding

2 Setting the time

MOVEMENT

• Caliber 25-51 REC

• Manual winding

• Dimensions: 25 x 21.90 mm

• Height: 2.57 mm

• Number of parts: 142

• Number of jewels: 18

• Power reserve:

min. 44 hours

• Balance: Gyromax®

• Frequency:

28,800 semi-oscillations/hour (4 Hz)

• Balance spring: Spiromax®

• Patek Philippe Seal

INSTRUCTIONS

14 15

SETTINGTHETIME

To set the time, gently pull the crown all the way

out and move the hands in either direction. Once

you have set the correct time, push the crown home

again.

WINDINGCROWN

The winding crown is used to manually wind the

watch (position 1) and to set the time (position 2).

WINDING

Your watch incorporates a manually wound move-

ment. Fully wound, it will continue to run for at

least:

- 44 hours if your watch is equipped with calibers

215, 215 PS, and 25-21 REC

- 39 hours if your watch is equipped with the caliber

215 PS LU

We recommend that you wind your watch at about

the same time every day, preferably in the morning.

Turn the crown clockwise gently and steadily, and

stop when you feel resistance. Excessively forceful

winding could damage the movement.

1716

MOONPHASECORRECTION

Each time the correction push piece at 6 o’clock

(Ref. 4968) or at 8 o’clock (Ref. 7121) is actuated,

the moon-phase disk will advance by one day.

To begin the correction procedure, advance the

moon-phase disk until a full moon is displayed in

the middle of the aperture. Consult an almanac or

visit www.patek.com and count the number of days

that have elapsed since the last full moon (relative

to the current date). To set the correct moon phase,

press the correction push piece as many times as

the number of days that have elapsed since the last

full moon.

Please wind the watch and set the time before

y

ou put the watch on. This prevents lateral

pressure on the winding stem. Please use

your fingernails to pull the crown out and

turn it gently between two fingertips.

Never pull out the crown in a humid envi-

ronment or underwater: the water resist-

ance of your watch is assured only when

the crown is pushed home.

The correction push piece should be actu-

ated exclusively with the correction stylus

that was delivered with the watch. The use

of any other tool could damage your time-

piece.

If your watch has stopped running, rewind

it fully before performing any corrections or

adjustments.

Do not perform any moon-phase correction

between 4 p.m. and 8 p.m. or between 4 a.m.

and 8 p.m.

CAUTION

MAINTENANCE

18 19

QUALITYCONTROL

The movements and completely assembled watches

are subject to a series of technical tests and visual

inspections to verify their rate accuracy, winding

speed, power reserve, reliability, water resistance,

and overall appearance. Once assembled, your man-

ually wound watch will run for several weeks before

leaving the workshops; it fully complies with the

stringent criteria of the Patek Philippe Seal.

ACCURACY

The rate accuracy of Patek Philippe watches is ver-

ified in several phases of manufacturing, both with

uncased and fully cased movements. The final test

is performed with a wrist motion simulator and

the results must conform to the following Patek

Philippe precision benchmarks:

The rate accuracy of calibers with a diameter of 20 mm

or larger must range within -3 and +2 seconds per

24 hours.

The precision of a watch is determined by how accu-

rately it keeps the time. A watch that is fast or slow

is considered precise if the amount by which it is

fast or slow remains constant. Such a deviation can

be easily corrected. Consequently, the final test of

accuracy takes place on your wrist. Your tempera-

ment or the nature of your physical activities can

cause slight irregularities. Fluctuations in position,

temperature, or air pressure, the presence of mag-

netic fields (as produced by most electronic devices,

metal detectors, household appliances, etc.) as well

as vibrations and other factors may also affect its

accuracy. If you notice that your watch exhibits

CERTIFICATEOFORIGIN

Your watch is delivered with a certificate of origin

that indicates the movement and case numbers. The

certificate is valid only if it is dated, signed by an

Authorized Patek Philippe Retailer, and completed

with your name. It guarantees the authenticity of

your watch and validates your warranty privileges

for a period of two years after the date of sale. The

unique movement and case numbers of each watch

are transcribed into the workshop journals. With

this information, you may have yourself entered

in the Patek Philippe Register of Owners and will

obtain the International Patek Philippe Magazine free

of charge.

PATEKPHILIPPESEAL

As an all-encompassing hallmark of quality,

the Patek Philippe Seal applies to the entire

watch, including the movement, case, dial,

hands, pushers, strap, and clasp as well as to all other

facets that contribute to the precision and aesthetic

perfection of the timepiece. It covers the technical,

functional, and aesthetic factors, but also rate accu-

racy, dependability, and customer service quality.

Additionally, it reflects the maker’s know-how and

all other assets needed for the development, produc-

tion, and long-term maintenance of an extraordinary

timekeeping instrument.

2120

The watchmaker will completely disassemble the

movement and then inspect, clean, and lubricate

all of the individual parts prior to reassembly. All

functions of the watch will also be tested in detail

and the escapement regulated if necessary. Finally,

its rate accuracy will be monitored and precision-

adjusted for a further period of two weeks. The

entire process may take several weeks because each

watch must undergo a complete series of tests to

fulfill the strict quality criteria of Patek Philippe.

If you have any questions regarding the maintenance

of your watch or need the address of your closest

Authorized Patek Philippe Service Center, contact our

International Customer Service Department in Geneva,

or visit www.patek.com.

such irregularities, please do not hesitate to take

it to an Authorized Patek Philippe Retailer or an

Authorized Service Center where no effort will be

spared to assure that it is adjusted to meet your

expectations.

WATERRESISTANCE

Your watch is fitted with different types of seals

to protect the movement against the ingress of

dust and moisture and to prevent damage if it is

immersed in water. Nonetheless, we recommend

that you prevent direct contact with water if your

watch has a leather strap.

It is advisable to have a water-resistance test car-

ried out every year on your watch. This is a simple

procedure that takes only a few minutes at a prop-

erly equipped point of sale.

SERVICE

We recommend that you have your watch serviced

every three to five years. With this in mind, we

suggest that you take or send your watch to an

Authorized Patek Philippe Retailer or an Author-

ized Service Center. This gives you the assurance

that your watch will be entrusted to the hands of

a qualified Patek Philippe watchmaker in Geneva

or at an Authorized Service Center.

Français

CALIBRES

   PS

 PSLU   REC

MOUVEMENTS MANUELS

Français

25

Fidèle à l’esprit du grand art horloger, Patek

Philippe a toujours accordé une importance majeure

à l’excellence de ses mouvements. La maison

s’inscrit dans le cercle restreint des authentiques

manufactures à même de développer et fabriquer

leurs propres calibres. Une démarche exigeante où

s’allient savoir-faire ancestral et recherche d’avant-

garde, compétences manuelles et technologies de

pointe. Les mouvements Patek Philippe à remon-

tage manuel reflètent l’un des grands principes de

la manufacture : loger un maximum de complexité

dans un minimum d’espace et de diamètre afin de

donner au boîtier une minceur optimale, gage

d’élégance intemporelle. Fleurons de construction

horlogère, ils se distinguent aussi par le raffinement

de leurs finitions.

2726

INDICATIONS

Aiguille des heures

Aiguille des minutes

COURONNE

1 Remontage manuel

2 Mise à l’heure

MOUVEMENT

• Calibre 215

• Remontage manuel

• Diamètre : 21,90 mm

• Épaisseur : 2,55 mm

• Nombre de composants : 130

• Nombre de rubis : 18

• Réserve de marche :

min. 44 heures

• Balancier : Gyromax®

• Fréquence :

28 800 alternances/heure (4 Hz)

• Spiral : Spiromax®

• Poinçon Patek Philippe

2928

INDICATIONS

Aiguille des heures

Aiguille des minutes

Cadran auxiliaire :

Petite seconde

COURONNE

1 Remontage manuel

2 Mise à l’heure

MOUVEMENT

• Calibre 215 PS

• Remontage manuel

• Diamètre : 21,90 mm

• Épaisseur : 2,55 mm

• Nombre de composants : 130

• Nombre de rubis : 18

• Réserve de marche :

min. 44 heures

• Balancier : Gyromax®

• Fréquence :

28 800 alternances/heure (4 Hz)

• Spiral : Spiromax®

• Poinçon Patek Philippe

3130

INDICATIONS

Aiguille des heures

Aiguille des minutes

Cadran auxiliaire :

Petite seconde

Guichet :

Phases de lune

COURONNE

1 Remontage manuel

2 Mise à l’heure

BOUTON

CORRECTEUR

Correction des phases de lune

MOUVEMENT

• Calibre 215 PS LU

• Remontage manuel

• Diamètre : 21,90 mm

• Épaisseur : 3 mm

• Nombre de composants : 157

• Nombre de rubis : 18

• Réserve de marche :

min. 39 heures – max. 44 heures

• Balancier : Gyromax®

• Fréquence :

28 800 alternances/heure (4 Hz)

• Spiral : Spiromax®

• Poinçon Patek Philippe

3332

INDICATIONS

Aiguille des heures

Aiguille des minutes

COURONNE

1 Remontage manuel

2 Mise à l’heure

MOUVEMENT

• Calibre 25-51 REC

• Remontage manuel

• Dimensions : 25 x 21,90 mm

• Épaisseur : 2,57 mm

• Nombre de composants : 142

• Nombre de rubis : 18

• Réserve de marche :

min. 44 heures

• Balancier : Gyromax®

• Fréquence :

28 800 alternances/heure (4 Hz)

• Spiral : Spiromax®

• Poinçon Patek Philippe

MODE D’EMPLOI

34 35

MISEÀL’HEURE

L’heure se règle en tirant doucement la couronne

et en déplaçant les aiguilles vers l’avant ou vers

l’arrière. Une fois l’heure ajustée, n’oubliez pas de

repousser la couronne contre le boîtier.

COURONNE

DEREMONTOIR

Le remontage manuel (position 1) et la mise à l’heure

(position 2) s’effectuent à l’aide de la couronne de

remontoir.

REMONTAGE

Votre montre est dotée d’un mouvement à remon-

tage manuel. Complètement remontée, elle bénéficie

d’une réserve de marche de minimum :

- 44 heures pour les montres équipées des calibres

215, 215 PS et 25-21 REC

- 39 heures pour les montres équipées du calibre

215 PS LU

Nous vous recommandons de remonter votre montre

chaque jour à la même heure, de préférence le matin.

Tournez doucement la couronne, dans le sens des

aiguilles d’une montre, et arrêtez dès que vous sen-

tez une résistance ; un remontage trop énergique

peut endommager le mouvement.

3736

CORRECTION

DESPHASESDELUNE

À chaque pression sur le bouton correcteur situé à

6 h (Référence 4968) ou à 8 heures (Référence 7121),

le disque de la lune progresse d’un jour vers une

nouvelle phase. Commencez par faire avancer le

disque lunaire jusqu’à ce que la lune apparaisse au

centre du guichet sous sa forme pleine. Consultez

ensuite un almanach ou le site www.patek.com pour

déterminer le nombre de jours écoulés depuis la der-

nière pleine lune (y compris le jour du réglage). Pour

positionner la lune sur sa phase exacte, pressez sur

le bouton correcteur autant de fois qu’il y a de jours

écoulés depuis la dernière pleine lune.

Il est préférable d’effectuer le remontage

et la mise à l’heure hors du poignet afin

d’éviter les pressions latérales sur le tube

de la couronne. Nous vous recommandons

de n’utiliser que deux doigts et de faire levier

avec l’ongle pour tirer la couronne.

Ne tirez jamais la couronne dans un environ-

nement humide ou dans l’eau. L’étanchéité

de votre montre n’est garantie qu’avec la

couronne poussée contre le boîtier.

Pour actionner le bouton correcteur, uti-

lisez exclusivement le crayon de fonction

fourni avec la montre. Tout autre outil risque

d’endommager votre garde-temps.

Si votre montre s’est arrêtée, il est impéra-

tif d’effectuer un remontage complet avant

toute correction ou manipulation.

Aucun réglage des phases de lune ne doit

être

effectué entre 16 h et 20 h et entre 4 h et

8 h du matin.

IMPORTANT

La pagina sta caricando ...

Patek Philippe 7042 Guida utente

Patek Philippe 7042 Guida utente

in altre lingue

Documenti correlati