6
EN
Technical Safety
xInstallation or repairs made by unauthorized persons can pose hazards to you and
others.
xAny person who is involved with working on or breaking into a refrigerant circuit
should hold a current valid certificate from an industry-accredited assessment
authority, which authorizes their competence to handle refrigerants safely in
accordance with an industry recognized assessment specification.
xServicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants.
xThe information contained in the manual is intended for use by a qualified service
technician who is familiar with the safety procedures and equipped with the proper
tools and test instruments.
xFailure to read and follow all instructions in this manual can result in equipment
malfunction, property damage, personal injury and/or death.
xThe appliance shall be installed in accordance with national wiring regulations.
xWhen the power cord is to be replaced, the replacement work shall be performed
by authorized personnel using only genuine replacement parts.
xThis appliance must be properly grounded to minimize risk of electric shock.
xDo not cut or remove the grounding prong from the power plug.
xAttaching the earth wire to the power outlet cover screw does not ground the
appliance unless the cover screw is metal, uninsulated, and the power outlet is
grounded through house wiring.
xIf you have any doubt whether the air conditioner is properly grounded, have the
power outlet and circuit checked by a qualified electrician.
xThe refrigerant and insulation blowing gas used in the appliance require special
disposal procedures. Consult a service agent or a similarly qualified person before
disposing of them.
xIf the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified person in order to avoid a hazard.
xThe appliance shall be stored in a well-ventilated area where the room size
corresponds to the room area as specified for operation.
xThe appliance shall be stored in a room without continuously operating open
flames (for example an operating gas appliance) and ignition sources (for example
an operating electric heater).
xThe appliance shall be stored so as to prevent mechanical damage from occurring.