Baumatic BWMI1262DN1 Manuale utente

Marca: Baumatic

Modello: BWMI1262DN1

Categoria: Lavatrici

Tipo: Manuale utente

Questo manuale è adatto anche per

Washing machine Instructions for use

BWMI1262DN1

BWMI1472DN1

Introduction

Please read these instructions for use carefully and all other information enclosed with the

washing machine.

Keep all documentation in a safe place for future reference or for any future owners.

This appliances is intended to be used in household and

similar applications such as:

- staff kitchen areas in shops, offices and other working environments;

- farm houses;

- by clients in hotels, motels and other residential type environments;

- bed and breakfast type environments.

A different use of this appliance from household environment or from typical housekeeping

functions, as commercial use by expert or trained users, is excluded even in the above

applications.

If the appliance is used in a manner inconsistent with this it may reduce the life of the

appliance and may void the manufacturer’s warranty.

Any damage to the appliance or other damage or loss arising through use that is not

consistent with domestic or household use (even if located in a domestic or household

environment) shall not be accepted by the manufacturer to the fullest extent permitted by law.

Notes on disposal

All packaging material used is environmentally-friendly and recyclable. Please help dispose of

the packaging via environmentally-friendly means.

Your supplier or local council will be able to give you

details of current means of disposal.

Valuable materials can be salvaged from an old appliance via scrap reprocessing.

Note: pull out the mains plug from any old appliance.

Cut the power cable and dispose of it, together with the

plug.

When disposing of an old washing machine, please ensure that the door lock is rendered

inoperable to prevent children shutting themselves in the appliance.

Contents Page

Introduction 2

General delivery notes 4

Safety notes 4

Quick start 5

Description of controls 6

Programme Table 12

Programme selector 14

Detergent drawer 17

Detergents, washing aids and amounts to use 18

Useful advice for the user 20

The main wash 21

Cleaning and routine maintenance 23

Investigating malfunctions 24

Technical data 26

Setting up + installation 27

BEFORE SWITCHING ON THE APPLIANCE MAKE SURE

IT IS CORRECTLY INSTALLED AND THAT THE FIXING

SCREWS ARE REMOVED AS SHOWN IN PAGE 27.

General delivery notes

Please check that the following items are delivered with the appliance:

- Instruction manual

- Certificate of guarantee

- Inlet hose

Check that no damage has occurred during transit, and if so, call your nearest Authorised

Technical Support Service agent.

Safety notes

Note:

for cleaning or maintenance of the washing machine.

A) Pull out the plug

B) Turn off the tap

C) Baumatic equips all its appliances with earthing. Ensure that the mains supply is earthed,

and if it is not, seek assistance from a qualified person.

D) Do not touch the appliance when hands or feet are wet or damp. Do not use the appliance

with bare feet.

E) The use of adapters, multiple connectors and/or extensions is not recommended.

Note:

water temperature can reach 90°C during the wash cycle.

F) Check there is no water left in the drum before opening the door.

G) This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

H) Do not pull the power cable or the appliance itself to remove the plug from the socket.

I) The appliance must not be exposed to weather conditions (rain, direct sun, etc...)

L) When moving the appliance never lift it by the controls or by the detergent drawer.

When in transit never rest the door against the trolley or transport the appliance without

the polystyrene base.

- Liquid detergent or liquid bleach compartment

M) N.B!

If the appliance is installed on a carpeted floor ensure that the ventilation holes on the

base of the appliance are not obstructed.

N) If the appliance is not running properly or breaks down, switch it off, turn off the tap and do

not tamper with the appliance.

Consult only the Authorised Technical Support Service for possible repair and ask them to

use original spare parts.

Failure to comply with the above can compromise the safety of the appliance.

O) If the appliance’s power cable should ever need replacing, consult the Authorised

Technical Support Service

Quick start

Washing

- Open the door by using the handle “A” (Fig. 1, page 6)

- Select laundry and put it in the machine

- Close the door

- Put detergent in the compartments as indicated in the programme guide in this instruction

manual

- Select programme

- The display will show the settings for the programme selected.

Press additional function buttons (if required)

- Press the “Start/Pause” button (page 7)

- The programme starts.

After washing

- The word “End” will appear on the display.

- Wait for the door lock to be released

(about 2 minutes after the programme has finished).

The “Door Security” indicator light will go out.

- Switch off the washing machine by turning the

selector to “OFF” position.

- Open the door and remove the laundry.

Ensure that the machine is correctly installed in line with the instructions found on page 28.

Description of controls

Door handle A

Programme Start light B

"Start/Pause" button C

"Cold Wash" button D

"Allergy Care" button E

"Delay Start" button F

"Spin Selection" button G

Digital display H

Buttons indicator light M

Programme selector with “OFF” position N

Detergent drawer P

Fig. 1

GME N

30’

30 C

40 C

30 C

44’

50 C

90 C + Pre

40 C

30 C

40 C

60 C

Eco 20 C

Fig. 1

NOTE: When the "Start/Pause" button has been pressed,

the appliance can take few seconds before it starts

working.

“START/PAUSE” button

Press to start the selected cycle .

Changing the settings after the programmes has started (PAUSE)

Press and hold the “START/PAUSE” button for about 2 seconds, the flashing lights on the

options buttons and time remaining indicator will show that the machine has been paused,

adjust as required and press the “START/PAUSE” button again to cancel the flashing lights.

If you wish to add or remove items during washing, wait 2 minutes until the safety device

unlocks the door.

When you have carried out the manoeuvre, close the door, press "Start/Pause" button and

the appliance will continue working where it left off.

CANCELLING THE PROGRAMME

To cancel the programme, set the selector to the OFF position.

Select a different programme.

Re-set the programme selector to the OFF position.

Programme Start light

This lights up when the START button has been pressed.

Door handle

To open the door turn the handle in the manner illustrated in fig.

The option buttons should be selected before pressing

the "Start/Pause" button.

“ALLERGY CARE” button

By pressing this button you can activate a special new wash cycle in the Cotton and Mixed

Fabrics programs, thanks to the new Sensor System. This option treats with care the fibres of

garments and the delicate skin of those who wear them.

The load is washed in a much larger quantity of water and this, together with the new combined

action of the drum rotation cycles, where water is filled and emptied, will give you garments which

have been cleaned and rinsed to perfection. The amount of water in the wash is increased so that

the detergent dissolves perfectly, ensuring an efficient cleaning action. The amount of water is also

increased during the rinse procedure so as to remove all traces of detergent from the fibres. This

function has been specifically designed for people with delicate and sensitive skin, for whom even

a very small amount of detergent can cause irritation or allergy.

You are advised to also use this function for children’s clothing and for delicate fabrics in general,

or when washing garments made of towelling, where the fibres tend to absorb a greater quantity of

detergent. To ensure the best performance for your wash, this function is always activated on the

Delicates and Woollens/Handwash programs.

“COLD WASH” button

By pressing this button it is possible to transform every programme into a cold washing one,

without modifying other characteristics (water level, times, rythmes, etc...).

Curtains, small carpets, man made delicate fabrics, non coulor fast garments can be safely

washed thanks to this new device.

30 C

Warning: If there is any break in the power supply while

the machine is operating, a special memory stores the

selected programme and, when the power is restored, it

continues where it left off.

“DELAY START” button

This button allows you to pre-programme the wash cycle to delay the start of the cycle for up

to 24 hours.

To delay the start use the following procedure:

Set the required programme.

Press the button once to activate it (h00 appears on the display) and then press it again to set

a 1 hour delay (h01 appears on the display); the pre-set delay increases by 1 hour each time

the button is pressed, until h24 appears on the display, at which point pressing the button

again will reset the delay start to zero.

Confirm by pressing the “START/PAUSE” button (the light on the display starts to flash). The

countdown will begin and when it has finished the programme will start automatically.

It is possible to cancel the delay start by taking the following action:

Press and hold the button for 5 seconds until the display will show the settings for the

programme selected.

At this stage it is possible to start the programme previously selected by pressing the

“START/PAUSE” button or to cancel the process by setting the selector to the OFF position

and then selecting another programme.

“SPIN SELECTION” button

The spin cycle is very important to remove as much water as possible from the laundry without

damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.

By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle

can be cancelled.

To reactivate the spin cycle press the button until you reach the spin speed you would like to set.

To prevent damage to the fabrics, it is not possible to increase the speed over that which is

automatically suitable during the selection of the program.

It is possible to modify the spin speed without to pausing the machine.

Note:

The machine is fitted with a special electronic device, which

prevents the spin cycle should the load be unbalanced.

This reduces the noise and vibration in the machine and so

prolongs the life of your machine.

“SPIN SELECTION” button

The spin cycle is very important to remove as much water as possible from the laundry without

damaging the fabrics. You can adjust the spin speed of the machine to suit your needs.

By pressing this button, it is possible to reduce the maximum speed, and if you wish, the spin cycle

can be cancelled.

To reactivate the spin cycle press the button until you reach the spin speed you would like to set.

To prevent damage to the fabrics, it is not possible to increase the speed over that which is

automatically suitable during the selection of the program.

It is possible to modify the spin speed without to pausing the machine.

Note:

The machine is fitted with a special electronic device, which

prevents the spin cycle should the load be unbalanced.

This reduces the noise and vibration in the machine and so

prolongs the life of your machine.

“DIGITAL” Display

The display’s indicator system allows you to be constantly informed about the status of the

machine:

1) SPIN SPEED

Once the programme has been selected, the maximum spin speed allowed for that

programme appears on the display. Pressing the spin button will reduce the speed by 100

rpm each time the button is pressed. The minimum speed allowed is 400 rpm, or it is

possible to omit the spin by pressing the spin button repeatedly.

2) DELAY START LIGHT

This flashes when delay start has been set.

3) “DOOR SECURITY” indicator light

The “Door Security” indicator light is illuminated when the door is fully closed and the machine is ON.

When "Start/Pause" is pressed on the machine with the door closed the indicator will flash

momentarily and then illuminate.

If the door is not closed the indicator will continue to flash.

A special safety device prevents the door from being opened immediately after the end of the cycle.

Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has gone out

before opening the door. At the end of the cycle turn the programme selector to "OFF" .

4) CYCLE DURATION

When a programme is selected the display automatically shows the cycle duration, which

can vary, depending on the options selected.

Once the programme has started you will be kept informed constantly of the time remaining

to the end of the wash.

The appliance calculates the time to the end of the selected programme based upon a

standard loading, during the cycle, the appliance corrects the time to that applicable to the

size and composition of the load.

PROGRAMME selector with "OFF" position

WHEN THE PROGRAMME

SELECTOR IS TURNED THE

DISPLAY LIGHTS UP TO SHOW

THE SETTINGS FOR THE

PROGRAMME SELECTED.

FOR ENERGY SAVING, AT THE

END OF THE CYCLE OR WITH AN

INACTIVITY PERIOD, THE

DISPLAY LEVEL CONTRAST WILL

DECREASE.

N.B. TO SWITCH THE MACHINE

OFF, TURN THE PROGRAMME

SELECTOR TO THE “OFF”

POSITION.

Press the "Start/Pause" button to start the selected cycle.

Once a programme is selected the programme selector remains stationary on the selected

programme till cycle ends.

Switch off the washing machine by turning the selector to "OFF".

Note:

The programme selector must be returned to the "OFF" position

at the end of each cycle or when starting a subsequent wash

cycle prior to the next programme being selected and started.

Buttons indicator light

These light up when the relevant buttons are pressed.

If an option is selected that is not compatible with the selected programme then the light on

the button first flashes and then goes off.

Whites

with Prewash

Fast coloureds

Non fast coloureds

Resistant or Mixed

fabrics

Resistant or Mixed

fabrics

Rinse

Fast spin

Drain only

Hand wash

“MACHINE

WASHABLE”

woollens

Resistant or Mixed

fabrics

Shirts

Non fast coloureds

Fast coloureds

90°

60°

40°

30°

40°

30°

20°

30°

40°

50°

TEMP.

°C

WEIGHT

MAX

TABLE OF PROGRAMMES

Resistant fabrics

Cotton, linen

Cotton, mixed

Very delicate fabrics

Mixed fabrics

and synthetics

Synthetics (nylon,

perlon), mixed cotton

CHARGE DETERGENT

PROGRAMME

SELECTOR

ON:

PROGRAM FOR:

Specials

1,5

3,5

1,5

30’

30 C

40 C

30 C

44’

50 C

90 C + Pre

40 C

30 C

40 C

60 C

Eco 20 C

Please read these notes

** STANDARD COTTON PROGRAMMES ACCORDING TO (EU) No 1015/2010 and

No 1061/2010

COTTON PROGRAMME with a temperature of 60°C

COTTON PROGRAMME with a temperature of 40°C

These programmes are suitable to clean normally soiled cotton laundry and they are the

most efficient programmes in terms of combined energy and water consumptions for

washing cotton laundry.

These programmes have been developed to be compliant with the temperature on the

wash label on the garments and the actual water temperature may slightly differ from the

declared temperature of the cycle.

The spin speed may also be reduced, to match any guidelines suggested on the

fabric label, or for very delicate fabrics cancel the spin completely this option is

available with a spin speed button.

When only a limited number of articles have stains which require treatment with

liquid bleaching agents,preliminary removal of stain can be carried out in the washing

machine. Pour the bleach into the liquid bleach container,inserted into the compartment

marked "2" in the detergent drawer, and set the special programme "RINSE" .

When this phase has terminated,switch off the appliance,add the rest of the fabrics

and proceed with a normal wash on the most suitable programme.

30’

30 C

40 C

30 C

44’

50 C

90 C + Pre

40 C

30 C

40 C

60 C

Eco 20 C

Programme selector

For the various types of fabrics and various degrees of dirt the washing machine has

different programme bands according to: wash cycle, temperature and lenght of cycle (see

table of washing cycle programmes).

RESISTANTS FABRICS

The Cotton programmes are designed for maximum washing and rinsing

efficiency. With spin cycles in between, the programme guarantees the

laundry is rinsed perfectly. The final spin cycle ensures laundry is spun dry

as much as possible up to the maximum speed.

The Cotton programme includes a Prewash cycle. This option is

particularly useful for really dirty loads and can be used independently of

the main wash programme. Additional detergent for the Prewash part of

the programme should be added to the first compartment of the soap

drawer labelled "I" (please refer to the section of this manual entitled

“Detergent”). We recommend you use only 20% of the quantity used for

the main wash programme.

DAILY WASH 30°C – FAST 30’

A complete washing cycle (wash, rinse and spin), able to wash in

approximately 30 minutes:

- a maximum load of 2 kg;

- lightly soiled fabrics (cotton and mixed fabrics)

We recommend, with this programme, a 20% detergent loading dose

(compared to the normal one), in order to avoid detergent waste.

DAILY WASH 40°C – FAST 44’

A complete washing cycle (wash, rinse and spin), able to wash in

approximately 44 minutes:

- a maximum

load of 3 kg;

- lightly soiled fabrics (cotton and mixed fabrics)

We recommend, with this programme, a 30% detergent loading dose

(compared to the normal one), in order to avoid detergent waste.

SPECIAL “RINSE” PROGRAMME

This programme carries out three rinses with a intermediate spin

(which can be reduced or excluded by using the correct button). It can

be used for rinsing any type of fabric, eg. use after hand-washing.

SPECIAL “SPIN” PROGRAMME

Programme “SPIN” carries out a maximum spin (which can be reduced by

using the correct button).

This program can be also used as cycle of Bleaching (see table of

washing cycle programmes).

90 C + Pre

60 C

40 C

30 C

30’

44’

DRAIN ONLY

This programme drains out the water.

MIXED AND SYNTHETIC FABRICS

The main wash and the rinse gives best results thanks to the rotation

rhythms of the drum and to the water levels.

Agentle spin will mean that the fabrics become less creased.

“Eco 20°C” PROGRAMME

This innovative programme, allows you to wash different fabrics and colours

together, such as cottons, synthetics and mixed fabrics at only 20°C and

provides an excellent cleaning performance.

Consumption on this program is about 40% of a conventional 40°C cottons wash.

WOOL PROGRAMME

A programme dedicated to washing fabrics labelled with the woolmark .

The cycle comprises of alternate periods of activity and pauses. The

programme has a maximum temperature of 40° and concludes with 3

rinses and a short spin.

SPECIAL “HAND WASH”

This washing machine also has a gentle Hand Wash programme cycle.

This programme allows a complete washing cycle for garments specified

as “Hand Wash only” on the fabric care label. The programme has a

temperature of 30°C and concludes with 3 rinses and a slow spin.

30 C

Eco 20 C

30 C

40 C

50 C

40 C

Auto half load

The washing machine is fitted with a self adjusting water level system.

This system enables the machine to use the amount of water needed to wash and rinse the

laundry in relation to the particular load.

This results in a reduction of the water and electricity used, without in any way

compromising the washing and rinsing performance.

In fact the amount of water and electricity used will always be appropriate for the clothes load.

The washing machine automatically ensures excellent washing results at minimum cost whilst

respecting the environment .

Detergent drawer

The detergent drawer is split into 3 compartments:

- the compartment labelled "I" is for prewash detergent;

- the compartment labelled " " is for special additives,

fabric softeners, fragrances, starch, brighteners etc;

- the compartment labelled "II" is for main wash

detergent.

NOTE:

Some Detergents are Difficult to

utilise. Ensure to use an in drum

dispenser if recommended by

the detergent Manufacturer.

Note: only put liquid products in the compartment

labelled “ ”. The machine is programmed to

automatically take up additives during the final rinse

stage for all wash cycles.

The detergent drawer is split into 3 compartments:

- the compartment labelled "I" is for prewash detergent;

- the compartment labelled " " is for special additives,

fabric softeners, fragrances, starch, brighteners etc;

- the compartment labelled "II" is for main wash

detergent.

NOTE:

Some Detergents are Difficult to

utilise. Ensure to use an in drum

dispenser if recommended by

the detergent Manufacturer.

Note: only put liquid products in the compartment

labelled “ ”. The machine is programmed to

automatically take up additives during the final rinse

stage for all wash cycles.

If liquid detergents are used, please insert the special

container supplied into the compartment marked “ II” in

the detergent drawer. This ensures that the liquid

detergent enters the drum at the right stage of the wash

cycle.

This special container must be inserted into the

compartment marked " II " in the detergent drawer, also

when you wish to use the "RINSE" programme as

BLEACHING cycle.

Detergents, washing aids and amounts to use

Choice of detergent

General purpose detergents

- Powder detergents, for a thorough wash, with bleaching agent, particularly suitable for

use in hot wash programmes (60°C and over), for heavily soiled and stained laundry.

- Liquid detergents, particularly suitable for grease stains, such as greasy skin marks,

cosmetics and oil.

These detergents are not suitable for washing stained laundry, as they do not contain

bleach.

- Biological detergents, not all the products available give a really thorough wash.

Additional laundry aids

- Water softener, means less detergent can be used where water hardness is classed as

hard to very hard.

- Prewash substances, for the programmed treatment of stains prior to the main wash.

Using them means the subsequent wash can be at a low temperature or with bleach-free

detergents.

- Fabric softener, prevents static build-up in synthetic fabrics and softens fabrics.

If you own a tumble dryer, clothes are softened even without the use of a fabric softener.

Do not put solvents in the washing machine!

Keep detergents and other laundry products out of children’s reach.

Before pouring in the detergent check that there are no foreign bodies in the detergent

drawer.

Dosage details are usually shown on the detergent packaging. Follow those instructions.

Dosages

Only use detergents which are suitable for use in a washing machine.

You will obtain the best results from your wash with the minimum use of chemical products

and the best care for your laundry if you take into consideration the degree of soiling as well

as the type of detergent to choose.

The amount of detergent to use depends on:

- water hardness: depending on the hardness of the water and the type of detergent used, it

is possible to reduce the amount of detergent.

- the degree of soiling: it is possible to reduce the amount of detergent used depending on

the degree of soiling.

- amount of laundry: it is possible to reduce the amount of detergent when washing only a

small amount of laundry.

Dosage for powder detergent

For normal and low concentration detergents: for normally soiled laundry choose a

programme without prewash.

Put the detergent in compartment “II” of the drawer.

For heavily soiled laundry, choose a programme with prewash.

Put 1/4 of the detergent in compartment “I”, 3/4 in compartment “II” of the drawer.

When using water softeners, first put in the detergent, then add the softener to compartment “II”.

For highly concentrated detergents not in single dose format, follow what is shown on pack

exactly as regards type and amount of dosage.

To avoid the difficulty of checking if the detergent has been taken up, use the dosage aids

provided in the detergent packaging.

Liquid detergent dosage

Liquid detergents may be used in accordance with the instructions on the relevant

packaging, for all programmes without prewash, by using the special container which is

placed in the drum or, for those models that have it, in the special insert for liquid detergents.

Recommendations on the use of detergent at various temperatures

When washing heavily soiled whites, we recommend using cotton programs of 60°C or above

and a normal washing powder (heavy duty) that contains bleaching agents that at medium/

high temperatures provide excellent results. For washes between 40°C and 60°C the type

of detergent used needs to be appropriate for the type of fabric and level of soiling. Normal

powders are suitable for “white” or colour fast fabrics with high soiling, while liquid detergents

or “colour protecting” powders are suitable for coloured fabrics with light levels of soiling.

For washing at temperatures below 40°C we recommend the use of liquid detergents or

detergents speciﬁ cally labeled as suitable for low temperature washing. For washing wool or

silk, only use detergents speciﬁ cally formulated for these fabrics. For dosage amounts please

follow the instructions on the detergent package label.

Useful advice for users

Tips on using your domestic appliance in the most environmentally-friendly and economical

way

Do a full load in your washing machine

To prevent any possible waste of energy, water or detergent we recommend that you put a

full load in your washing machine, not exceed the recommended maximum load size.

Up to 50% energy saving can be made with one full load compared to two half load washes

When is prewashing really needed?

Only with particularly dirty loads!

Energy savings of 5 to 15% are made by not selecting the prewash option for normal soiled

laundry.

Which wash temperature should you choose?

Using stain removers before machine washing reduces the need to wash at temperatures

over 60°C.

Energy savings of up to 50% can be made by using a 60°C wash temperature rather than

90°C

La pagina sta caricando ...

Baumatic BWMI1262DN1 Manuale utente

Marca: Baumatic

Modello: BWMI1262DN1

Categoria: Lavatrici

Tipo: Manuale utente

Questo manuale è adatto anche per

Scarica il pdf

rapporto

Baumatic BWMI1262DN1 Manuale utente

Questo manuale è adatto anche per

Baumatic BWMI1262DN1 Manuale utente

Altri documenti