Siemens WN44A1E0DN/01 Manuale utente

Register

your

product

online

siemens-home.bsh-group.com/welcome

en ,QVWUXFWLRQ0DQXDODQG,QVWDOODWLRQ,QVWUXFWLRQV

Washer dryer

WN44A1E0DN

2

Your new washer dryer

You have chosen a Siemens washer

dryer.

Please take a few minutes to read and

become familiar with the advantages of

your washer dryer.

To meet the high quality demands

required by Siemens, every washer dryer

that leaves our factory is carefully

checked to ensure that it functions

correctly and is in perfect condition.

For more information on our products,

accessories, replacement parts and

services, see our website www.siemens-

home.bsh-group.com or contact our

after-sales service centres.

If the operating and installation

instructions describe different models,

any differences will be pointed out at the

relevant points in the text.

Read these operating and installation

instructions before switching on the

washer dryer.

Display rules

: Warning!

This combination of symbol and signal

word indicates a possibly dangerous

situation. Not heeding the warning can

cause death or injuries.

Caution!

This signal word indicates a possibly

dangerous situation. Not heeding the

caution can cause property and/or

environmental damage.

Note/tip

Information about the optimum use of

the appliance/any other useful

information.

1. 2. 3. / a) b) c)

The steps are represented by numbers

or letters.

■ / -

Lists are represented by a small box or

a dash.

en

3

Contents

enInstruction Manual and Installation Instructions

8 Intended use. . . . . . . . . . . . . . . . .4

( Safety instructions . . . . . . . . . . .5

Children/people/pets . . . . . . . . . . . . . 5

Installation. . . . . . . . . . . . . . . . . . . . . . 6

Operation . . . . . . . . . . . . . . . . . . . . . . 8

Cleaning/Maintenance . . . . . . . . . . . 10

7 Environmental protection . . . . .12

Packaging/used appliance . . . . . . . . 12

Save energy and conserve

resources . . . . . . . . . . . . . . . . . . . . . 12

Energy saving mode. . . . . . . . . . . . . 12

5 Positioning and connecting . . .13

Standard accessories . . . . . . . . . . . . 13

Safety instructions. . . . . . . . . . . . . . . 13

Installation surface . . . . . . . . . . . . . . 14

Installation on a base or a wooden

joist floor. . . . . . . . . . . . . . . . . . . . . . 14

Installing the appliance in a

kitchenette . . . . . . . . . . . . . . . . . . . . 14

Removing the transport locks. . . . . . 15

Removing the support struts. . . . . . . 16

Hose and cable lengths . . . . . . . . . . 16

Water inlet. . . . . . . . . . . . . . . . . . . . . 17

Water outlet . . . . . . . . . . . . . . . . . . . 18

Alignment . . . . . . . . . . . . . . . . . . . . . 19

Electrical connection. . . . . . . . . . . . . 19

Before washing for the first time . . . . 20

Transportation. . . . . . . . . . . . . . . . . . 20

* Getting to know the

appliance . . . . . . . . . . . . . . . . . .22

Appliance . . . . . . . . . . . . . . . . . . . . . 22

Control panel . . . . . . . . . . . . . . . . . . 23

Display panel . . . . . . . . . . . . . . . . . . 24

Z Laundry. . . . . . . . . . . . . . . . . . . .25

Preparing laundry for washing . . . . . 25

Preparing laundry for drying . . . . . . . 26

Starching . . . . . . . . . . . . . . . . . . . . . 26

Dyeing/bleaching . . . . . . . . . . . . . . . 26

C Detergents and care

products . . . . . . . . . . . . . . . . . . . 27

Detergent recommendation. . . . . . . .27

P Overview of programmes . . . . . 28

Selectable programme . . . . . . . . . . .28

Drying table . . . . . . . . . . . . . . . . . . . .33

0 Programme default settings. . . 34

°C (Temperature) . . . . . . . . . . . . . . .34

0 (Spin speed). . . . . . . . . . . . . . . . .34

B (Finished in / Time Dry) . . . . . . . .34

\ Additional programme

settings. . . . . . . . . . . . . . . . . . . . 35

Ô (Drying Aim). . . . . . . . . . . . . . . . .35

ã (Stains) . . . . . . . . . . . . . . . . . . . .35

s (Prewash) . . . . . . . . . . . . . . . . . .36

æ (Easy iron) . . . . . . . . . . . . . . . . . .36

( (varioSpeed). . . . . . . . . . . . . . . .36

1 Operating the appliance . . . . . . 36

Preparing the appliance . . . . . . . . . .36

Select programme/switch on the

appliance. . . . . . . . . . . . . . . . . . . . . .37

Placing laundry into the drum . . . . . .37

Dosing and adding detergent and

care products . . . . . . . . . . . . . . . . . .37

Starting the programme . . . . . . . . . .39

Childproof lock . . . . . . . . . . . . . . . . .39

Adding/removing laundry . . . . . . . . .39

Changing the programme . . . . . . . . .39

Cancel the programme . . . . . . . . . . .39

Programme end . . . . . . . . . . . . . . . .40

Removing laundry/switching off the

appliance. . . . . . . . . . . . . . . . . . . . . .40

Q Appliance settings . . . . . . . . . . 41

H Sensors . . . . . . . . . . . . . . . . . . . 41

Unbalanced load detection system . .41

en Intended use

4

2 Cleaning and maintenance . . . 42

Appliance housing/control panel. . . 42

Drum . . . . . . . . . . . . . . . . . . . . . . . . 42

Descaling. . . . . . . . . . . . . . . . . . . . . 42

Emptying the detergent draw,

cleaning the detergent drawer and

its housing . . . . . . . . . . . . . . . . . . . . 43

Drain pump is blocked . . . . . . . . . . 44

The drain hose at the siphon is

blocked . . . . . . . . . . . . . . . . . . . . . . 45

Filter in the water supply is

blocked . . . . . . . . . . . . . . . . . . . . . . 45

3 Faults and what to do about

them . . . . . . . . . . . . . . . . . . . . . 46

Emergency release . . . . . . . . . . . . . 46

Information on the display panel . . . 46

Faults and what to do about them . . 48

4 Customer Service . . . . . . . . . . . 52

Product number (E-Nr.) and

production number (FD) . . . . . . . . . 52

[ Consumption values . . . . . . . . 53

J Technical data. . . . . . . . . . . . . . 54

r Aqua-Stop warranty . . . . . . . . . 54

8 Intended use

Intended use

■ This appliance is intended for private

domestic use only.

■ Do not install or operate this

appliance anywhere that is liable to

experience frost and/or outdoor

conditions. There is a risk that the

appliance will be damaged if

residual water in it freezes. If hoses

freeze up, they may crack/burst.

■ This appliance must only be used for

washing domestic laundry,

consisting of machine-washable

items and hand-washable woollens

(see label on item). Using the

appliance for any other purpose is

outside of the scope of its intended

application and is forbidden.

■ This appliance must only be used for

drying and freshening up domestic

laundry, consisting of items that have

been washed with water and are

suitable for tumble drying (see label

on item). Using the appliance for any

other purpose is outside of the

scope of its intended application and

is forbidden.

■ This appliance is suitable for

operation with mains water and

commercially available detergents

and care products (must be suitable

for use in washing machines).

■ This appliance is intended for use up

to a maximum height of

4000 metres above sea level.

Before you switch on the appliance:

Check that there is no visible damage to

the appliance. Do not operate the

appliance if it is damaged. Should you

have any problems, please contact your

specialist dealer or our customer

service.

Read and follow the operating and

installation instructions and all other

information provided with this appliance.

Retain the documents for subsequent

use or for subsequent owners.

Safety instructions en

5

( Safety instructions

Safety instructi ons

The following safety information

and warnings are provided to

protect you from injury and to

prevent material damage to

your surroundings.

It is nevertheless important to

take the necessary precautions

and to proceed with care when

installing, maintaining, cleaning

and operating the appliance.

Children/people/pets

:Warning

Risk of death!

Children and other people who

are unable to assess the risks

involved when using the

appliance may injure

themselves or may find

themselves in life-threatening

situations. Therefore please

note:

■ The appliance may be used

by children over the age of 8

years and by persons with

reduced physical, sensory or

mental capacity or by

persons with a lack of

experience or knowledge as

long as they are supervised

or have received instruction

on how to use the appliance

safely and they have

understood the potential

risks of using the appliance.

■ Children must not play with

this appliance.

■ Do not allow children to

clean or maintain this

appliance unsupervised.

■ Keep children under 3 years

and pets away from this

appliance.

■ Do not leave the appliance

unattended when children or

other people who are unable

to assess the risks are in the

vicinity.

:Warning

Risk of death!

Children may lock themselves

inside appliances and find

themselves in a life-threatening

situation.

■ Do not position the

appliance behind a door, as

this may obstruct the

appliance door or prevent it

from opening completely.

■ Once an appliance has

reached the end of its life,

pull the mains plug from the

socket before severing the

mains cable, and then

destroy the lock on the

appliance door.

:Warning

Risk of suffocation!

If allowed to play with the

packaging/plastic film or

packing components, children

may become caught in these or

pull them over their heads and

suffocate.

Keep packaging, plastic film

and packing components away

from children.

en Safety instructions

6

:Warning

Risk of poisoning!

Detergents and care products

may result in poisoning if

consumed.

If accidentally swallowed, seek

medical advice. Keep

detergents and care products

out of the reach of children.

:Warning

Eye/skin irritation!

Contact with detergents or care

products may cause eye/skin

irritation.

Rinse eyes/skin thoroughly if

they/it come(s) into contact

with detergents or care

products. Keep detergents and

care products out of the reach

of children.

Installation

:Warning

Risk of electric shock/fire/

material damage/damage to

the appliance!

If the appliance is not installed

properly, this may lead to a

dangerous situation. Ensure

the following:

■ The mains voltage on your

power socket must match

the rated voltage specified

on the appliance

(identification plate). The

connected loads and the

required fuse protection are

specified on the identification

plate.

■ The appliance must not be

supplied through an external

switching device, such as a

timer, or connected to a

circuit that is regularly

switched on and off by a

utility.

■ The mains plug and the

protective contact socket

must match and the earthing

system must be correctly

installed.

■ The installation must have an

adequate cross section.

■ The mains plug must be

freely accessible at all times.

If this is not possible, in

order to comply with the

relevant safety regulations, a

switch (all pole

disconnection) must be built

into the permanent

installation in accordance

with electrical installation

regulations.

■ If using a residual current

circuit breaker, only use one

that bears the following

mark: z. The presence of

this mark is the only way to

be sure that it fulfils all the

applicable regulations.

:Warning

Risk of electric shock/fire/

material damage/damage to

the appliance!

If the appliance's mains cable is

altered or damaged, this may

result in electric shock, short

circuiting or fire due to

overheating.

Safety instructions en

7

The mains cable must not be

kinked, crushed or altered, and

must not come into contact with

any heat sources.

:Warning

Risk of fire/material damage/

damage to the appliance!

The use of extension cords or

power strips may result in fire

due to overheating or short

circuiting.

Connect the appliance directly

to an earthed socket that has

been correctly installed. Do not

use extension cords, power

strips or multi-way couplers.

:Warning

Risk of injury/material

damage/damage to the

appliance!

■ The appliance may vibrate or

move when in operation,

potentially resulting in injury

or material damage.

Place the appliance on a

clean, even, solid surface

and, using a spirit level to

guide you, level it with the

screw-in feet.

Risk of injury/material damage/damage to the appliance!

■ If you take hold of any of the

appliance's protruding parts

(e.g. the appliance door) in

order to lift or move it, these

parts may break off and

cause injury.

Do not take hold of any of

the appliance's protruding

parts in order to move the

appliance.

:Warning

Risk of injury!

■ The appliance is very heavy.

Lifting it may result in injury.

Do not lift the appliance on

your own.

Risk of injury!

■ The appliance has sharp

edges on which you could

cut your hands.

Do not take hold of the

appliance by its sharp

edges. Wear protective

gloves to lift it.

Risk of injury!

■ If the hoses and mains

cables are not correctly

routed, they may constitute a

tripping hazard, which may

result in injury.

Route hoses and cables

such that they do not

constitute a tripping hazard.

Caution!

Material damage/damage to

the appliance

■ If the water pressure is too

high or too low, the

appliance may not be able to

operate properly, and it may

also result in material

damage or damage to the

appliance.

Make sure that the water

pressure in the water supply

facility is at least

100 kPa (1 bar), and does

not exceed

1000 kPa (10 bar).

Material damage/damage to the appliance

en Safety instructions

8

■ If the water hoses are altered

or damaged, this may result

in material damage or

damage to the appliance.

The water hoses must not be

kinked, crushed, altered or

severed.

Material damage/damage to the appliance

■ The use of hoses supplied

by other brands to connect

to the water supply may

result in material damage or

damage to the appliance.

Use the hoses supplied with

the appliance or genuine

spare part hoses only.

Material damage/damage to the appliance

■ The appliance is secured for

transportation by transport

locking devices. If the

transport locking devices are

not removed before the

appliance is operated, this

may result in damage to the

appliance.

It is important to completely

remove all transport locking

devices before using the

appliance for the first time.

Make sure that you retain

these transport locking

devices separately. It is

important to refit the

transport locking devices if

the appliance is to be

transported, in order to

prevent the appliance from

being damaged in transit.

Operation

:Warning

Risk of explosions/fire!

Laundry that has come into

contact with solvents, oil, wax,

wax remover, paint, grease or

stain remover may ignite when

dried in the machine, or even

cause the appliance to explode.

Therefore please note:

■ Rinse the laundry thoroughly

with warm water and

detergent before drying it in

the machine.

■ Do not place laundry in this

appliance to be dried if the

laundry has not been

washed first.

■ Do not use the appliance if

industrial chemicals have

been used to clean the

laundry.

:Warning

Risk of explosions/fire!

■ Laundry that has been

pretreated with cleaning

agents that contain solvents,

e.g. stain remover/cleaning

solvent, may cause an

explosion in the drum.

Rinse the laundry thoroughly

with water before washing it

in the machine.

Risk of explosions/fire!

Safety instructions en

9

■ Certain objects may ignite

when drying is in progress,

or even cause the appliance

to catch fire or explode.

Remove any lighters or

matches from pockets on

items of clothing.

Risk of explosions/fire!

■ If there is coal dust or flour in

the air around the appliance,

this may cause an explosion.

Make sure that the area

around the appliance is kept

clean when it is in operation.

:Warning

Risk of fire/material damage/

damage to the appliance!

If a program is terminated

before the drying cycle has

finished, this prevents the

laundry from cooling down

sufficiently and may cause the

laundry to ignite, or may result

in material damage or damage

to the appliance.

■ During the last part of the

drying cycle, the laundry in

the drum is not heated

(cooling cycle). This is to

ensure that it remains at a

temperature at which it will

not be damaged.

■ Do not switch off the

appliance before the drying

cycle has finished unless you

remove all items of laundry

from the drum immediately

and spread them out (to

dissipate the heat).

:Warning

Risk of poisoning!

Poisonous fumes may be given

off by cleaning agents that

contain solvents, e.g. cleaning

solvent.

Do not use cleaning agents that

contain solvents.

:Warning

Risk of injury!

■ If you support your weight/sit

on the appliance door when

it is open, the appliance may

tip over, which may result in

injury.

Do not support your weight

on the appliance door when

it is open.

Risk of injury!

■ If you climb onto the

appliance, the worktop may

break, which may result in

injury.

Do not climb onto the

appliance.

Risk of injury!

■ If you reach into the drum

while it is still rotating, you

risk injuring your hands.

Wait until the drum has

stopped rotating.

:Warning

Risk of scalding!

When washing at high

temperatures, there is a risk of

scalding if you come into

contact with hot detergent

solution (e.g. when draining hot

detergent solution into a

washbasin).

Do not reach into the hot

detergent solution.

en Safety instructions

10

:Warning

Eye/skin irritation!

Detergent and care products

may spray out if the detergent

drawer is opened while the

appliance is in operation.

Rinse eyes/skin thoroughly if

they/it come(s) into contact

with detergents or care

products. If accidentally

swallowed, seek medical

advice.

Caution!

Material damage/damage to

the appliance

■ If the amount of laundry in

the appliance exceeds its

maximum load capacity, it

may not be able to operate

properly, or this may result in

material damage or damage

to the appliance.

Do not exceed the maximum

load capacity of dry laundry.

Make sure you comply with

the maximum load capacities

specified for each of the

programs.

Material damage/damage to the appliance

■ Foam and foam rubber may

deform or melt if dried in the

appliance.

Do not dry laundry items that

contain foam or foam rubber

in the appliance.

Material damage/damage to the appliance

■ If you pour the wrong

quantity of detergent or

cleaning agent into the

appliance, this may result in

material damage or damage

to the appliance.

Use detergents/care

products/cleaning agents

and softeners in accordance

with the manufacturers'

instructions.

Cleaning/Maintenance

:Warning

Risk of death!

The appliance is powered by

electricity. There is a risk of

electric shock if you come into

contact with live components.

Therefore please note:

■ Switch off the appliance.

Disconnect the appliance

from the power supply (pull

out the plug).

■ Never take hold of the mains

plug with wet hands.

■ When removing the mains

plug from the socket, always

take hold of the plug itself

and never the mains cable,

otherwise this may damage

the mains cable.

■ Do not make any technical

modifications to the

appliance or its features.

Safety instructions en

11

■ Repairs and any other work

on the appliance must only

be conducted by our

customer service or by an

electrician. The same applies

for replacing the mains cable

(when necessary).

■ Spare mains cables can be

ordered from our customer

service.

:Warning

Risk of poisoning!

Poisonous fumes may be given

off by cleaning agents that

contain solvents, e.g. cleaning

solvent.

Do not use cleaning agents that

contain solvents.

:Warning

Risk of electric shock/material

damage/damage to the

appliance!

If moisture penetrates the

appliance, this may cause it to

short circuit.

Do not use a pressure washer,

steam cleaner, hose or spray

gun to clean your appliance.

:Warning

Risk of injury/material

damage/damage to the

appliance!

The use of spare parts and

accessories supplied by other

brands is dangerous and may

result in injury, material damage

or damage to the appliance.

For safety reasons, use

genuine spare parts and

accessories only.

Caution!

Material damage/damage to

the appliance

Cleaning agents and agents for

pretreating laundry (e.g. stain

removers, prewash sprays, etc.)

may cause damage if they

come into contact with the

surfaces of the appliance.

Therefore please note:

■ Do not allow these agents to

come into contact with the

surfaces of the appliance.

■ Clean the appliance with

nothing but water and a soft,

damp cloth.

■ Remove any detergent,

spray or other residues

immediately.

en Environmental protection

12

7 Environmental

protection

Environmental protecti on

Packaging/used appliance

Save energy and conserve

resources

If you follow these instructions, your

appliance will use less electricity and

less water.

Choose programmes with low

temperatures and longer wash times

and use maximum load capacity

~ Page 28.

■ Energy consumption and water

consumption is most efficient.

Use the economy programme settings.

■ If you adjust the programme settings

for a programme, the display shows

the expected consumption.

Add ~ Page 27 detergent based on

the laundry’s degree of soiling.

■ For light to normal soiling, a smaller

amount of detergent is sufficient.

Observe the dosage

recommendation from the detergent

manufacturer.

Reduce the washing temperature for

lightly and normally soiled laundry.

■ At low temperatures, the appliance

consumes less energy. For light to

normal soiling, lower temperatures

than indicated on the care label are

also sufficient.

Set the maximum spin speed if you

want to dry the laundry in a tumble dryer

afterwards.

■ The drier the laundry, the shorter the

programme duration when drying

which, in turn, reduces energy

consumption. A higher spin speed

reduces the residual moisture in the

laundry and increases the volume of

the spin noise.

Wash the laundry without prewash.

■ Washing with prewash increases the

programme duration and increases

energy and water consumption.

The appliance has a continuous

automatic load adjustment function.

■ Depending on the type of fabric and

load capacity, the continuous

automatic load adjustment function

optimally adjusts the water

consumption and programme

duration.

Energy saving mode

If the appliance is not operated for a

prolonged period (approx. 5 minutes), it

automatically switches to energy-saving

mode, the display panel lighting goes

out before the programme starts and

after the programme has ended, À

flashes. Touch any area of display panel

to activate the display backlighting.

energy saving mode is not be activated

when the programme is running.

)

Dispose of packaging in an

environmentally-responsible

manner.

This appliance is labelled in

accordance with European

Directive 2012/19/EU

concerning used electrical and

electronic appliances (waste

electrical and electronic

equipment - WEEE).

The guideline determines the

framework for the return and

recycling of used appliances

as applicable throughout the

EU.

Positioning and connecting en

13

5 Positioning and

connecting

Positioning and connecting

Standard accessories

Note: Check the appliance for transport

damage. Never use a damaged

appliance. If you have any complaints,

contact the dealer from whom you

purchased the appliance or our

Customer Service.

In addition, a hose clamp (24 - 40 mm

diameter, available from specialist

retailers) is required to connect the

water outlet hose to a siphon.

Useful tool

■ Spirit level for aligning

■ Wrench with:

– WAF13 for loosening the

transport braces and

– WAF17 for aligning the appliance

feet

Safety instructions

:Warning

Risk of injury!

■ The appliance is very heavy.

Be careful when lifting/transporting

the appliance.

A Mains lead

B Bag:

■ Installation and operating

instructions

■ Customer Service location

directory*

■ Warranty*

■ Supplementary sheet for the

installation and operating

instructions*

■ Cover caps for openings after

the transport braces have

been removed

■ Home Connect Installation

Guides*

C Water inlet hose on aquaStop

models

D Water outlet hose

E Elbow for securing the water

outlet hose*

F Cold water inlet hose on

Standard/Aqua-Secure models

* Depending on the model

en Positioning and connecting

14

■ When the appliance is lifted by its

protruding parts (e.g. the appliance

door), the components may break

off and cause injuries.

Do not lift the appliance by

protruding parts.

■ If the hose and mains cables are not

routed properly, there is a risk of

tripping and injury.

Lay hoses and cables in such a way

that there is no risk of tripping.

Caution!

Damage to the appliance

Frozen hoses may rip/burst.

Do not install the appliance in areas

exposed to frost or outdoors.

Caution!

Water damage

The connection points for the water

supply hose and water drain hose are

under high water pressure. To prevent

leaks and water damage, you must

follow the instructions in this section.

Notes

■ In addition to the safety information

listed here, the local water and

electricity supplier may have special

requirements.

■ If in doubt, have the appliance

connected by a specialist.

Installation surface

Note: The appliance must be stable

aligned so that it does not move

around.

■ The installation surface must be firm

and level.

■ Soft floors/floor coverings are not

suitable.

Installation on a base or a

wooden joist floor

Caution!

Damage to the appliance

The appliance may "wander" and tip/

topple from the base when spinning.

The feet of the appliance must be

secured with holding brackets.

Order no. WMZ 2200, WX 975600,

CZ 110600, Z 7080X0.

Note: On wooden joist floors, install the

appliance:

■ In a corner, if possible,

■ On a water-resistant wooden board

(min. 30 mm thick) which is screwed

tightly to the floor.

Installing the appliance in a

kitchenette

:Warning

Risk of death!

There is a risk of electric shock if you

touch live components.

Do not remove the appliance covering

plate.

Notes

■ Recess width of 60 cm required.

■ Only install the appliance

underneath a continuous worktop

that is securely connected to

adjacent cabinets.

Positioning and connecting en

15

Removing the transport locks

Caution!

Damage to the appliance

■ The appliance is secured for

transportation using transport locks.

If the transport locks are not

removed, the appliance may

become damaged when it is

operated.

Before using the appliance for the

first time, make sure that you

completely remove all four transport

locks. Keep the locks in a safe

place.

■ To prevent transport damage from

occurring if the appliance is moved

at a later date, you must refit the

transport locks before transporting

the appliance.

Note: Keep the screws and sleeves in

a safe place.

1. Take the hoses out of the holders.

2. Unscrew and remove all four

transport brace screws.

a) Remove the mains cable from the

holders.

b) Remove the sleeves.

3. Fit the covers.

en Positioning and connecting

16

4. Lock the covers firmly in place by

applying pressure to the snap-in

hooks.

Removing the support struts

1. Unscrew and remove all screws in

the vertical transport struts.

2. Remove the transport struts.

3. Undo and remove the screws on the

horizontal transport strut.

4. Remove the transport strut.

Hose and cable lengths

Connection on left side

or

Connection on right side

7

( ~ 130 cm

0 ~ 150 cm

8 ~ 90 cm

@ 60 cm ~ 100 cm

( ~ 85 cm

0 ~ 195 cm

8 ~ 135 cm

@ 60 cm ~ 100 cm







#







#

Positioning and connecting en

17

Tip: The following are available from

specialist dealers/the after-sales

service:

■ An extension for Aqua-Stop or cold

water supply hose (approx. 2.50 m);

order no. WZ10131

■ A longer supply hose (approx.

2.20 m) for standard model.

Water inlet

:Warning

Risk of death!

There is a risk of electric shock if you

touch live components.

Do not immerse the Aqua-Stop safety

valve* in water (it contains an electric

valve).

* Depending on the model

Observe the following when connecting

the appliance:

Notes

■ Only operate the appliance using

cold mains water.

■ Do not connect the appliance to the

mixer tap of an unpressurised hot-

water boiler.

■ Do not use a used supply hose. Only

use the supply hose supplied or one

that was purchased from an

authorised specialist retailer.

■ Do not bend, squash, modify or cut

through the water supply hose

(otherwise its strength is no longer

guaranteed).

■ Only tighten the screw connections

by hand. If the screw connections

are tightened too much with a tool

(pliers), the thread may be

damaged.

Optimum water pressure in the supply

network

At least 100 kPa (1 bar)

Maximum 1000 kPa (10 bar)

When the tap is open, the water flow is

at least 8 l/min.

If the water pressure is higher than this,

a pressure-reducing valve must be

installed.

Connection

1. Connect the water supply hose to

the water tap (¾" = 26.4 mm) and to

the appliance:

– Model: Standard

– Model: AquaSecure

– Model: Aqua-Stop

en Positioning and connecting

18

Tip:

Connect also an external water

filter (depending on the model)

between water supply hose and tap.

The filter filters dirt particles out of the

water.

Water filter must be cleaned regularly

to remove contaminants. This will

prevent blockages. See also ~

separate installation and cleaning

instruction for water filter.

2. Open the water tap carefully,

checking the leak tightness of the

connection points. The screw

connection is under mains water

pressure.

Water outlet

:Warning

Risk of scalding!

When you are washing at high

temperatures, there is a risk of scalding

if you come into contact with hot water

(e.g. when draining hot water into a

washbasin).

Do not reach into the hot water.

Caution!

Water damage

When water is being pumped away, the

outlet hose is under water pressure and

may slip out of the wash basin or

connection point.

Secure the drain hose so that it cannot

slip out.

Caution!

Damage to the appliance/fabrics

If the end of the drain hose is immersed

in the drained water, water may be

sucked back into the appliance and may

damage the appliance/fabrics.

Make sure that:

■ The plug does not block drainage

from the washbasin.

■ The end of the drain hose is not

immersed in the drained water.

■ The water drains away quickly

enough.

Note: Do not kink the water drain hose

or put strain on it lengthways.

Connection

■ Drainage into a siphon

The connection point must be

secured using a hose clamp with a

diameter of 24 - 40 mm (available

from specialist dealers).

■ Drainage into a washbasin

Secure the outlet hose so that it

cannot slip out.

Elbow available from after-sales

service:

Individual part number 00655300

■ Drainage into a plastic pipe with

rubber bushing or into a drainage

pit

Note: The plastic pipe is not

standard accessory, available from

specialist dealers.

Positioning and connecting en

19

Alignment

Level the appliance using a spirit level.

Incorrect levelling may result in intense

noise, vibrations and "wandering".

1. Loosen the lock nuts using a wrench,

by turning it in a clockwise direction.

2. Check the alignment of the appliance

with a spirit level, and adjust it if

necessary. Change the height by

turning the appliance feet.

All four appliance feet must stand

firmly on the ground.

3. Tighten the lock nut against the

housing.

In doing so, hold the foot tight and

do not adjust its height.

The lock nuts on all four appliance

feet must be screwed tightly against

the housing.

Electrical connection

:Warning

Risk of death!

There is a risk of electric shock if you

touch live components.

■ Never touch or hold the mains plug

with wet hands.

■ Only pull out the mains cable by the

plug and never by the cable, as this

could damage it.

Observe the following information and

ensure that:

Notes

■ The mains voltage and voltage

indicated on the appliance (rating

plate) are the same.

The connected load and fuse

required are specified on the rating

plate.

■ The appliance is only connected to

an alternating current via a properly

installed earthed socket.

■ The mains plug fits the socket.

■ The earthing system is properly

installed.

■ The mains cable is only replaced by

a qualified electrician (if this is

necessary). Replacement mains

cables are available from the after-

sales service.

■ No multiple plugs/couplings or

extension cables are used.

■ If an earth-leakage circuit breaker is

used, only a type which displays this

symbol is used: z.

Only this symbol guarantees

compliance with the currently

applicable regulations.

■ The mains plug can be accessed at

all times.

■ The mains cable is not bent,

squashed, modified, cut through, or

in contact with heat sources.

en Positioning and connecting

20

Before washing for the first

time

The appliance was inspected

thoroughly before leaving the factory. To

remove any residual test water, run the

Cotton 90°C programme the first time

without laundry.

Note:

■ The appliance must have been

installed and connected properly.

~ "Positioning and connecting"

on page 13

■ Never switch on a damaged

appliance.

1. Insert mains plug.

2. Turn the water tap on.

3. Close the door. Do not load any

laundry.

4. Select the Cotton 90°C programme.

5. Open the detergent drawer.

6. Pour approx. 1 litre of water into

dispenser II.

7. Add standard detergent to dispenser

II according to manufacturer’s

instructions for light soiling.

Note: To prevent frothing, use only

half the recommended amount

of detergent. Do not use any

woollens or mild detergents.

8. Close the detergent drawer.

9. Select I (Start/Reload) .

10.When the programme ends, turn the

programme selector to Û (Off).

Your appliance is now ready for use.

Transportation

e.g. when moving home

Preparatory work:

1. Turn off the water tap.

2. Reduce the water pressure in the

supply hose. ~ Page 45

3. Drain any residual water.

~ Page 44

4. Disconnect the appliance from the

mains.

5. Remove the hoses.

6. Empty the dispensers.

Caution!

Risk of damage to the appliance

caused by detergent/fabric softener

leaking from the dispensers

Leaking detergent/fabric softener

can prevent the appliance from

working correctly, e.g. due to

damage to the electronics.

Empty the dispensers before

transporting the appliance.

Installing the transport locks:

1. Remove the covers and keep them

in a safe place.

Note: Use a screwdriver if

necessary.

La pagina sta caricando ...

Siemens WN44A1E0DN/01 Manuale utente

Siemens WN44A1E0DN/01 Manuale utente

in altre lingue

Documenti correlati

Altri documenti