GEARSTONE L80001262 Manuale utente

1-15

16-33

34-51

52-69

70-87

88-105

Home Exercise Bike Instruction Manual

V2021.0.1

1-17

18-35

36-53

54-71

72-89

90-107

-1-

Safety Instructions

Please pay attention to the following matters before installing and

using this exercise bike:

1. Please install in strict accordance with the requirements of the manual.

2. In order to ensure the safety of users, please check whether all the bolts and

other connecting parts on the equipment are locked before each use.

3. Do not expose the equipment to damp places, as this will cause malfunctions.

4. It is best to put the parts on a mat (rubber or wood) during installation to avoid

soiling.

5. Before exercising, make sure that no other items are placed within 2 meters of

the exercise bike.

6. Do not use corrosive detergent when cleaning the machine. Please use the tools

provided with the vehicle or your own special tools to assemble and repair parts.

Also pay attention to wipe off the sweat dripping on the car in time after each exer-

cise.

7. Incorrect or super-intensity exercise is not good for your health. It is recommend-

ed to consult a doctor before exercise, he will set you a maximum amount of exer-

cise (including pulse, watts, duration, etc.), so that you can be on your own exer-

cise and get accurate information. Any strenuous exercise can only start after 40

minutes after a meal.

Note: This bike cannot be used for therapeutic training.

8.You can exercise only when the machine is in a normal state, and you can only

use the accessories provided by the original factory when repairing.

9. This machine can only be used for exercise by one person at a time.

10. It is best to wear sportswear and sports shoes when exercising, and sports

shoes must fit well.

11. If you feel dizzy, vomiting or other bad symptoms during exercise, you should

stop training immediately and see a doctor for consultation.

12. Children and the disabled can only use it under the supervision of someone.

13. This car is designed to adjust the size of the resistance to adjust the speed of

movement, from light to heavy, it can be adjusted back and forth to choose your

suitable resistance.

14. The user's weight cannot exceed 100 kg.

-2-

Exploded View:

TOO L2

TOO L1 TOO L3

-3-

X-BIKE Exploded View List

NO.

Name

Qty

NO.

Name

Qty

1 Front bracket assembly 1 55 Special elastic pin M16 1

2 Rear bracket assembly 1 56 storage box 1

3 Seat cushion tube assembly 1 57 Tighten the bolts 1

4 Front armrest tube assembly 1 58 Support adjustment tube 1

5 Front leg assembly 1 59 Cylindrical pin 1

6 Rear leg assembly 1 60 Round pipe inner plug 2

7 Intermediate rotation group 1 61 Pan Head Hexagon Bolt 1

8 Cushion connecting pipe assembly 1 62 Flat pad 1

9 Cushion fixing pipe assembly 1 63 Locknut 3

10 Rear armrest tube assembly 1 64 Pan Head Hexagon Bolt 4

11 Belt pulley assembly 1 65 Spring cushion 4

12 Cast iron wheel 1 66 Electronic watch cover 1

13 Circlip for shaft 6 67 Round pipe inner plug 4

14 Bearing seat 2 68 Thread plug 4

15 Bearing 4 69 Left pedal nut (left tooth) 1

16 Bearing cap 2 70 Right pedal nut (right tooth) 1

17 Phillips pan head screws 6 71 Center lock flange nut 2

18 Wave washers 5 72 Crank plug 2

19 driven wheel 1 73 Phillips pan head tapping screws 4

20 Bearing 2 74 Phillips pan head tapping and self-drilling screws 6

21 Plastic spacer 1 75 Belt 1

22 Driven shaft 1 76 Belt 1

23 Draw bolt 2 77 Cap nut 5

24 Draw bolt U-shaped baffle 2 78 Enlarged arc gasket 6

25 Locknut 2 79 Left front foot plug assembly 1

26 Hex nuts 2 80 Front foot right plug assembly 1

27 Circlip for shaft 1 81 Round pipe outer plug 2

28 Wave spring cushion 1 82 Sponge grip 2

29 Hexagon thin nuts 1 83 Bushing between pipes 1

30 Circlip for shaft 1 84 M8 lock nut 3

31 Bearing 1 85 Flat pad 3

32 Pinch roller shaft 1 86 cushion 1

33 Increase flat pad 1 87 Pan head square neck bolts 2

34 Locknut 1 88 Pan Head Hexagon Bolt 2

35 Magnet frame assembly 1 89 Sponge grip 2

36 magnet 6 90 Pan Head Hexagon Bolt 1

37 Cross flat head bolt 1 91 Plastic flat pad 2

38 spring 1 92 Square tube plug 1

39 Cross pan head bolts 2 93 Square tube plug 4

40 Sensor base 1 94 Pan Head Hexagon Bolt 4

41 Left pedal 1 95 Spring cushion 4

42 Right pedal 1 96 Cushion 1

43 Left crank 1 97 Limit plug 1

44 Right crank 1 98 Phillips pan head tapping screws 2

45 Left protective cover 1 99 Cross pan head bolts 1

46 Line plug-2 1 100 Increase flat pad 1

47 Right protective cover 1 101 Phillips pan head tapping screws 2

48 Electronic watch back cover 1 102 Phillips pan head tapping and self-drilling screws 1

49 Middle protective cover 1 103 Magnet holder 1

50 Plastic bushing 6 104 Eight-speed fine-tuning 1

51 Pan Head Hexagon Bolt 2 105 Phillips tapping screws 1

52 Increase flat pad 6 106 Pulse seat 2

53 transmission shaft 1 107 Flat pad 2

54 M10 fixed pin special 1 108 Phillips pan head tapping screws 2

7

8

0

6

-4-

Step 1:

Take out the product out of the box as shown in Figure 1;

Pull the special elastic pin (55) outward and unfold the body as shown in Figure 2.

-5-

Step 2:

TOOL2

1. Use TOOL 2 with cap nut (77) to enlarge the arc-shaped washer(78) Fix the

front leg tube (5) to the front bracket (1), and lock it tight.

2. Use TOOL 2, cooperate with the cap nut (77) to enlarge the arc-shaped washer

(78), fix the rear leg tube (6) to the rear bracket (2), and lock it.

-6-

Step 3:

TOOL2TOOL3

1. Using TOOL 2, screw the left pedal (41) into the left crank, and then cooperate

with TOOL3 to tighten the left pedal nut (69).

2.Using TOOL 2, screw the right pedal (42) into the right crank, and then cooperate

with TOOL3 to tighten the right pedal nut (70).

Note: Please pay attention to the direction of the arrow during tightening.

-7-

Step 4:

T O O L1

1. Insert the front armrest assembly (4) into the rear bracket tube (2), use TOOL 1,

and cooperate with the pan-head hexagon socket bolt (64) spring washer (65) to fix

the front armrest assembly (4) to the front bracket (2) .

2: Connect the electronic meter connector (A/B) and click into place (as shown in

the figure)

-8-

Step 5:

TOOL2

1.Using TOOL 2, fit the seat cushion (86) with the lock nut (84) The gasket (85) is

fixed on the cushion tube.

2.Insert the locked seat tube (3) into the front bracket (1), and fix it with the tighten-

ing bolt (57).

-9-

Step 6:

1: Use TOOL 1 to fix the back cushion (96) on the back cushion tube (9) with the

pan head hexagon socket bolt (94) and spring washer (95).

2: Use TOOL 1 and TOOL 2, and cooperate with the pan-head hexagon socket bolt

(94) to enlarge the arc-shaped cushion (78) and the cap nut (77), and fix the rear

armrest (10) to the back cushion connecting pipe (8).

3: Use TOOL 2, cooperate with the pan-head square neck bolt (87) to enlarge the

flat washer (52) and lock nut (63), and fix the locked cushion connecting tube (8) to

the cushion tube (3).

T O O L1

T O O L2

-10-

Finished :

The product assembly is completed.

Please install the battery of the electronic watch before use, and remove the bat-

tery when not in use for a long time.

Before use, please be sure to check whether all the connections are fully locked

before moving.

-11-

Exercise Bike Status:

Pull the special elastic pin (55) outwards and unfold the body to make the special

elastic pin (55) snap into hole B.

-12-

Lazy Bike Status:

Pull the special elastic pin (55) outward and unfold the body so that the special

elastic pin (55) fits into the hole A.

Collapse status:

Pull the special elastic pin (55) outward and unfold the body so that the special

elastic pin (55) fits into the hole C.

-13-

-14-

EXERCISE COMPUTER INSTRUCTION MANUAL

FUNCTIONAL BUTTON:

MODE : Push down to select functions, (SCAN),(TIME),(SPEED),(DIST),(ODO),

(CAL),♥

RESET : Push down to reset timedistance and calories for 2 seconds.

FUNCTIONS AND OPERATIONS

1. SCAN: Press MODE button until “SCAN” appears, monitor will rotate through the

following functions: timespeed distance calories odometer and pulse,

each display will be hold 6 seconds.

2. TIME : Count the total time from exercise start to end.

3. SPEED: Display current speed.

4. DISTANCE: Count the distance from exercise start to end.

5. CALORIES: Count the total calories from exercise start to end.

6. ODOMETERTOTAL DISTMonitor will display the total accumulated dis

tance, after the battery is reinstalled, the value will return to zero.

7. PULSE RATE: Measure the user's heart rate.Press the button to switch to the

pulse function, and hold the two heartbeat sensors in both hands to measure the

heart rate.

Remark: During the process of pulse measurement, because of the contact jam-

ming, the measurement value may be higher than the virtual pulse rate during the

first 2~3 seconds, then will return to normal level. The measurement value can not

be regarded as the basis of medical treatment.

NOTE

1. If the display is faint or shows no figures ,please replace the batteries.

2. The monitor will automatically shut off if there is no signal received after 4 min

utes .

3. The monitor will be auto powered on when starting to exercise push button

signal in.

4. The monitor will automatically start calculating when you start to exercise and

will stop calculating when you stop exercising for 4 seconds .

-15-

FUNCTION

AUTO SCAN

Every 6 seconds

TIME

0:00’~99:59’

CURRENT SPEED

0.0~999.9 KM/H（MILE/H）

TRIP DISTANCE

0.00~999.9 KM

（

MILE

）

CALORIES

0.0~999.9 CAL

ODOMETER

0.0~9999 KM

（

MILE

）

PULSE RATE 40~240 BPM

BATTERY TYPE 2pcs of SIZE –AAA or UM –4

OPERATING TEMPERATURE

0°C ~ +40°C

STORAGE TEMPERATURE -10°C ~ +60°C

SPECIFICATIONS:

Sports Description

Using a multi-functional abdomen machine can bring you many benefits, it can

improve your physical health, strengthen muscles, and control diet calories can

help you lose weight.

1. Warm-up Stage

This stage helps blood flow around the body and allows the muscles to work

normally. It also reduces the risk of cramps and muscle damage. It is recom-

mended to do some stretching exercises as shown below. Each stretch should

be maintained for about 30 seconds. Do not force or jerk your muscles. If you

feel pain, stop immediately.

-16-

2. Exercise Stage

This is the stage where you work hard. After regular use, the leg muscles will

become more flexible. It is very important to maintain a steady rhythm throughout

the process. The speed of movement should be enough to make your heartbeat

reach the target area shown in the figure below.

This stage should last at least 12 minutes, most people 15-20 minutes

3.Relaxation Stage

This stage is to relax your cardiovascular system and muscles. This is a repe-

tition of a warm-up exercise, such as slowing down your rhythm for about 5

minutes. The stretching exercise should be repeated now, again remember

not to force or pull your muscles into the stretch.

When you become healthier, you may need to train longer and harder. It is

wise to train at least three times a week, and if possible, schedule your exer-

cises evenly throughout the week.

4.Muscle sculpting

In order to exercise muscles on your abdomen machine, you need to set a

fairly high resistance. This will put more pressure on our leg muscles and

may mean that you can't train as long as you think. If you also want to

improve your fitness level, you need to change your training plan. During the

warm-up and cooling phase, you should train as usual, but at the end of the

exercise phase, you should increase the resistance to make your legs work

harder. You will have to reduce your speed to keep your heart rate in the

target zone.

Heart rate

Target zone

Max

Slow-down

Age

-17-

Lose Weight

The important factor here is the effort you put in. The harder you exercise and

the longer it takes, the more calories you burn. Effectively speaking, it's like you

are training to improve your physical fitness, but the goal is different.

-18-

Sicherheitshinweise

Beachten Sie vor der Installation und Verwendung dieses Heim-

trainers Folgendes:

1. Installieren Sie in strikter Übereinstimmung mit den Anforderungen des Hand-

buchs;

2. Um die Sicherheit der Benutzer zu gewährleisten, überprüfen Sie, ob alle

Schrauben und andere Verbindungsteile vor jedem Gebrauch an der Ausrüstung

verriegelt sind;

3. Setzen Sie das Gerät nicht feuchten Stellen aus, da dies zu Fehlfunktionen

führen kann;

4. Es ist am besten, die Teile auf einer Matte (Gummi oder Holz) zum Zeitpunkt der

Installation zu platzieren, um eine Kontamination zu verhindern;

5. Prüfen Sie vor dem Training, dass sich keine anderen Gegenstände innerhalb

von 2 Metern vom Heimtrainer befinden;

6. Verwenden Sie kein beißendes Reinigungsmittel, um die Maschine zu reinigen.

Verwenden Sie die mitgelieferten Werkzeuge oder Ihre eigenen Spezialwerkzeuge,

um Teile zu montieren und zu reparieren. Stellen Sie außerdem sicher, dass Sie

nach jeder Übung den Schweiß, der auf das Gerätfällt, rechtzeitigabwischen;

7. Falsches oder superintensives Training ist nicht gut für Ihre Gesundheit. Es wird

empfohlen, vor dem Training einen Arzt aufzusuchen. Er wird eine maximale

Menge an Training für Sie (einschließlich Puls, Wattleistung, Dauer, etc.) Auf diese

Weise können Sie sich selbst trainieren und genaueInformationen erhalten. Jede

anstrengende Übung kann erst nach 40 Minuten nach dem Essen beginnen.

Hinweis: des Gerät kann nicht für therapeutische Ausbildung verwendet werden;

8. Sie können nur trainieren, wenn die Maschine in einem normalen Zustand ist,

und Sie können nur das Zubehör verwenden, das von der ursprünglichen Fabrik

bei der Reparatur zur Verfügung gestellt wird;

9. Diese Maschine kann nur von einer Person zu einer Zeit für die Praxis verwen-

det werden;

10. Es ist am besten, Sportbekleidung und Sportschuhe während des Trainings zu

tragen, und Sportschuhe sollten gut passen;

11. Wenn Sie während des Trainings Schwindelgefühle, Erbrechen oder andere

Symptome empfinden, sollten Sie sofort mit dem Training aufhören und einen Arzt

zur Konsultation konsultieren;

12. Kinder und Behinderte dürfen sie nur unter Aufsicht einer Person benutzen;

13. D es Gerät ist entworfen, um die wzuerst einzustellen und die Geschwindigkeit

derBewegung einzustellen, von leicht bis schwer, kann es hin und her eingestellt

werden, um Ihren geeigneten Widerstand zu wählen;

14. Das Gewicht des Nutzers darf 100 kg nicht überschreiten;

La pagina sta caricando ...

GEARSTONE L80001262 Manuale utente

GEARSTONE L80001262 Manuale utente

in altre lingue

Altri documenti