Bose Surround Speakers Manuale del proprietario

SURROUND SPEAKERS

IMPORTANT SAFETY INSTRUCTIONS

2

|

ENG

Please read and keep all safety and use instructions.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

10. Only use attachments/accessories speciﬁed by the manufacturer.

11. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do NOT expose this product to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases, on

or near the product.

• Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles, on

or near the product.

• Do NOT make unauthorized alterations to this product.

• Do NOT use a power inverter with this product.

• Do NOT use in vehicles or boats.

• The speaker wire and interconnect cables included with this system are not approved for in-wall installation.

Please check your local building codes for the correct type of wire and cable required for in-wall installation.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

• Due to ventilation requirements, Bose does not recommend placing the product in a conﬁned space such as in a

wall cavity or in an enclosed cabinet.

REGULATORY INFORMATION

3

|

ENG

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate this

equipment.

This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this

device must accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and Industry Canada radiation exposure limits set forth for general population. This

equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body. This

transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful

interference to other co-channel systems.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The

complete declaration of conformity can be found at: www.Bose.com/compliance

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is

in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information

Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at

230V/50Hz input

≤ 0.5 W Bose wireless ≤ 2.0 W

Time after which equipment is automatically

switched into mode

≤ 2.5 hours ≤ 20 minutes

Power consumption in networked standby if all wired

network ports are connected and all wireless network

ports are activated, at 230V/50Hz input

N/A ≤ 2.0 W

Network port deactivation/activation procedures.

Deactivating all networks will enable standby mode.

Per Annex II 3(a) of Regulation 801/2013 ("Lot 26" amendment of

1275/2008), the requirement to deactivate a wireless port "does not

apply to products which rely on a single wireless network connection for

intended use and have no wired network connection."

REGULATORY INFORMATION

4

|

ENG

Europe only:

Frequency band of operation 2400 to 2483.5 MHz:

• Wi-Fi: Maximum transmit power less than 20 dBm EIRP.

Frequency band of operation 5150 to 5350 MHz and 5470 to 5725 MHz:

• Wi-Fi: Maximum transmit power less than 20 dBm EIRP.

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member

States listed in the table.

BE DK IE UK FR CY SK HU AT SE

BG DE PT EL HR LV LT MT PL

CZ EE FI ES IT RO LU NL SI

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal and recycling of this product, contact

your local municipality, disposal service, or the shop where you bought this product.

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by

the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If

found, the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this

part is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

REGULATORY INFORMATION

5

|

ENG

Taiwan Restriction of Hazardous Substances Table

Equipment name: Powered Speaker, Type designation: 429148

Restricted substances and its chemical symbols

Unit

Lead

(Pb)

Mercury (Hg) Cadmium (Cd)

Hexavalent

chromium (Cr+6)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

PCBs

- ○ ○ ○ ○ ○

Metal Parts

- ○ ○ ○ ○ ○

Plastic Parts

○ ○ ○ ○ ○ ○

Speakers

- ○ ○ ○ ○ ○

Cables

- ○ ○ ○ ○ ○

Note 1:

“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Please complete and retain for your records

The serial and model numbers are located on the bottom of the surround speakers.

Serial number: ____________________________________________________________________

Model number: ____________________________________________________________________

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to http://global.Bose.com/register

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “8” is 2008 or 2018.

China Importer

: Bose Electronics (Shanghai) Company Limited, Part C, Plan 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No.10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V. , Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

Input Rating: 100 - 240V 50/60Hz 30W

LEGAL INFORMATION

6

|

ENG

Android, Google Play, and the Google Play logo are trademarks of Google LLC.

The Bluetooth

®

word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Bose Corporation is under license.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a

service mark of Apple Inc.

Acoustimass, ADAPTiQ, Bose, Bose Bass Module, Bose Music, the Bose Music logo, Bose Surround Speakers,

SoundTouch, and the wireless note design are registered trademarks of Bose Corporation in the U.S. and

other countries.

Wi-Fi is a registered trademark of Wi-Fi Alliance

®

.

Bose Corporation Headquarters: 1-877-230-5639

prior written permission.

7

|

ENG

CONTENTS

WHAT’S IN THE CARTON

Contents ............................................................................................................................. 9

SYSTEM PLACEMENT

Recommendations.......................................................................................................... 10

Mount the speakers ............................................................................................... 11

WIRELESS RECEIVER SETUP

Connect the adapters ................................................................................................... 12

Identify switch settings on the wireless receivers ............................................. 13

Connect the speakers ................................................................................................... 13

POWER

Connect the Bose Surround Speakers to power ................................................ 14

CONNECT TO A SOUNDBAR

Choose your connection method ............................................................................. 15

Connect using the Bose Music App ........................................................................ 16

New to the Bose Music app? .............................................................................. 16

Connect using the SoundTouch 300 Remote ..................................................... 17

Check for sound .............................................................................................................. 17

ADAPTIQ AUDIO CALIBRATION

Choose your audio calibration method .................................................................. 18

Run ADAPTiQ audio calibration using the Bose Music App .......................... 19

Initial setup ................................................................................................................ 19

Use the Settings menu ......................................................................................... 19

Run ADAPTiQ audio calibration using the SoundTouch 300 remote ........ 20

SURROUND SPEAKER STATUS

Status light ........................................................................................................................ 22

CONTENTS

8

|

ENG

CARE AND MAINTENANCE

Clean the Surround Speakers..................................................................................... 23

Replacement parts and accessories ........................................................................ 23

Limited warranty ............................................................................................................. 23

TROUBLESHOOTING

Try these solutions ﬁrst ................................................................................................ 24

Other solutions ................................................................................................................ 24

Unable to complete ADAPTiQ audio calibration with your

SoundTouch 300 soundbar

........................................................................................ 26

9

|

ENG

WHAT’S IN THE CARTON

CONTENTS

Conﬁrm that the following parts are included:

Bose Surround Speakers (2) Wireless receiver (2)

AC2 adapter (2) Power cord (2)*

Phillips-head screwdriver Two-pin speaker cable (2)

*May ship with multiple power cords. Use the power cord for your region.

NOTE: If any part of the product is damaged, do NOT use it. Contact your authorized

Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/WSS

10

|

ENG

SYSTEM PLACEMENT

RECOMMENDATIONS

To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 – 0.9 m)

away from the wireless receivers. Place the speakers and wireless receivers

outside and away from metal cabinets, other audio/video components and direct

heat sources.

COMPONENT PLACEMENT RECOMMENDATIONS

Rear speakers

Place the speakers on their rubber feet on a stable and level surface.

Place the speakers at ear height or higher in the back of the room.

If placing the speakers in an enclosed bookcase shelf, position them at

the front edge of the shelf.

For a sound that is directed straight at the listener, aim the speakers in

towards the listener.

For a sound that reﬂects o the walls to ﬁll the room, aim the speakers

out towards a rear or side wall.

Wireless receivers

Conﬁrm that the switch on one wireless receiver is set to R (right).

Conﬁrm that the switch on the other wireless receiver is set to L (left).

Facing the TV, place the speaker and R wireless receiver on the right

side of the room.

Facing the TV, place the speaker and L wireless receiver on the left side

of the room.

Make sure there is an AC (mains) outlet near each wireless receiver.

SYSTEM PLACEMENT

11

|

ENG

Mount the speakers

You can mount the speakers on wall brackets, ceiling mounts, ﬂoor stands or

table stands. To purchase these accessories, visit Bose.com or contact your local

Bose dealer.

CAUTION: Only use Bose hardware to mount the speakers. Using unauthorized

mounts may damage your Bose system and its components.

12

|

ENG

WIRELESS RECEIVER SETUP

CONNECT THE ADAPTERS

1. Using the screwdriver, turn the screws to the left (counter-clockwise) to loosen the

wire terminals.

2. Insert the red, stripped end of the two-pin cable marked H into the red H terminal.

3. Insert the black, stripped end of the two-pin cable into the silver z terminal.

NOTE: Be sure to only insert the stripped and tinned portions of each exposed

wire to avoid clamping the wire’s insulation.

4. Using the screwdriver, turn the screws to the right (clockwise) to secure the wires

into the terminals.

5. Repeat steps 1 – 4 to connect the other adapter.

WIRELESS RECEIVER SETUP

13

|

ENG

IDENTIFY SWITCH SETTINGS ON THE

WIRELESS RECEIVERS

The speakers connect to wireless receivers to communicate with your

Bose Soundbar 500, Bose Soundbar 700 or SoundTouch 300 soundbar. The receivers

come preset to a left and right channel out of the box. You can use the switch on the

front of the receiver to adjust the channel settings.

1. Conﬁrm that the switch on one wireless receiver is set to L (left).

2. Conﬁrm that the switch on the other wireless receiver is set to R (right).

NOTE: Make sure that one wireless receiver is always set to L (left) and the other is

set to R (right).

CONNECT THE SPEAKERS

1. Insert the adapter into the back of the speaker.

2. Insert the other end of the two-pin cable into the wireless receiver.

You hear or feel a click.

3. Repeat steps 1 – 2 to connect the other speaker.

WIRELESS RECEIVER SETUP

14

|

ENG

POWER

CONNECT THE BOSE SURROUND SPEAKERS TO POWER

1. Connect the power cord to the wireless receiver.

2. Plug the other end of the power cord into an AC (mains) power outlet.

3. Repeat steps 1 – 2 to connect the other speaker to power.

15

|

ENG

CONNECT TO A SOUNDBAR

CHOOSE YOUR CONNECTION METHOD

The way you connect the surround speakers depends on your soundbar. Choose your

connection method from the table below.

SOUNDBAR CONNECTION METHOD

Bose Soundbar 500 or

Bose Soundbar 700

Connect using the Bose Music app (see page 16).

NOTE:

If you can’t access or have trouble

connecting using the Bose Music app,

see “Troubleshooting” on page 24.

SoundTouch 300 soundbar

Connect using the your soundbars remote

(see page 17).

CONNECT TO A SOUNDBAR

16

|

ENG

CONNECT USING THE BOSE MUSIC APP

1. In the Bose Music app, from the My Bose screen, select your soundbar.

2. Tap the soundbar image in the bottom-right corner of the screen.

3. Tap Settings > Accessory Speakers > Add Bose Accessory Speakers.

Follow the app instructions.

New to the Bose Music app?

1. On your mobile device, download the Bose Music app.

2. Follow the app instructions

NOTE: For support information related to the Bose Music app, visit:

global.Bose.com/Support

CONNECT TO A SOUNDBAR

17

|

ENG

CONNECT USING THE SOUNDTOUCH 300 REMOTE

1. On your soundbar’s remote, press the SoundTouch button e.

2. Press and hold k until the connectivity l light on the soundbar blinks white.

Once connected, you hear a tone. The light on the back of the wireless receivers

and l on the soundbar glow white.

NOTES: Connecting may take several minutes.

If the surround speakers don’t connect to the soundbar, see

“Troubleshooting” on page 24.

CHECK FOR SOUND

NOTE: To avoid hearing distorted audio, turn o your TV speakers. Refer to your TV

owner’s guide for more information.

1. Power on your TV.

2. If you are using a cable/satellite box or other secondary source:

a. Power on this source.

b. If this source is connected to your TV, select the appropriate TV input.

3. Power on the soundbar.

You hear sound coming from the surround speakers.

NOTE: If you don't hear sound from the surround speakers, see “Troubleshooting”

on page 25.

18

|

ENG

ADAPTIQ AUDIO CALIBRATION

After setting up the surround speakers and connecting with the soundbar, run

ADAPTiQ audio calibration for best acoustic performance. ADAPTiQ audio calibration

customizes the sound of the system to the acoustics of your listening area by taking

ﬁve audio measurements. To run an audio calibration, you need 10 minutes when the

room is quiet.

During ADAPTiQ audio calibration, a microphone on the top of the ADAPTiQ headset

(provided with the soundbar) measures the sound characteristics of your room to

determine optimal sound quality.

If you no longer have the ADAPTiQ headset, contact Bose customer service for

a replacement.

CHOOSE YOUR AUDIO CALIBRATION METHOD

The way you run ADAPTiQ audio calibration depends on your soundbar. Choose your

audio calibration method from the table below.

SOUNDBAR AUDIO CALIBRATION METHOD

Bose Soundbar 500 or

Bose Soundbar 700

Run ADAPTiQ audio calibration using the Bose Music

app (see page 19).

SoundTouch 300 soundbar

Run ADAPTiQ audio calibration using your

soundbar’s remote (see page 20).

ADAPTIQ AUDIO CALIBRATION

19

|

ENG

RUN ADAPTIQ AUDIO CALIBRATION USING THE

BOSE MUSIC APP

Initial setup

After you connect the surround speakers to your soundbar, the Bose Music app

prompts you to run ADAPTiQ audio calibration. Follow the app instructions.

Use the Settings menu

If you later connect the optional Bose Bass Module 500, Bose Bass Module 700 or

Acoustimass 300 bass module, or move the speakers or move any furniture, run

ADAPTiQ audio calibration to ensure optimal sound quality.

1. In the Bose Music app, from the My Bose screen, tap your soundbar.

2. Tap the soundbar image on the bottom-right corner of the screen.

3. Tap Settings > ADAPTiQ > Run ADAPTiQ.

ADAPTIQ AUDIO CALIBRATION

20

|

ENG

RUN ADAPTIQ AUDIO CALIBRATION USING THE

SOUNDTOUCH 300 REMOTE

1. Insert the ADAPTiQ headset cable into the a connector on the back of the

SoundTouch 300 soundbar.

ADAPTiQ

2. Put on the ADAPTiQ headset.

La pagina si sta caricando...

Bose Surround Speakers Manuale del proprietario

Questo manuale è adatto anche per

Bose Surround Speakers Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti