Bose Bass Module 700 Guida utente

BASS MODULE 700

IMPORTANT SAFETY INSTRUCTIONS

2

|

ENG

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety, security, and use instructions.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and

other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The

complete declaration of conformity can be found at: www.Bose.com/compliancewww.Bose.com/compliance

This product product conforms to all applicable Electromagnetic Compatibility Regulations 2016 and all other

applicable UK regulations. The complete declaration of conformity can be found at:

www.Bose.com/compliancewww.Bose.com/compliance

Bose Corporation hereby declares that this product is in compliance with the essential requirements per

Radio Equipment Regulations 2017 and all other applicable UK regulations. The complete declaration of

conformity can be found at: www.Bose.com/compliancewww.Bose.com/compliance

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

10. Only use attachments/accessories speciﬁed by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualiﬁed personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

3

|

ENG

IMPORTANT SAFETY INSTRUCTIONS

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that

may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions in this guide.

This product contains a tempered glass surface. Use caution to avoid impact. In the event of breakage, use

care in handling broken glass.

This product contains magnetic material. Consult your physician on whether this might aect your

implantable medical device.

• To reduce the risk of ﬁre or electrical shock, do NOT expose this product to rain, liquids or moisture.

• Do NOT expose this product to dripping or splashing, and do not place objects ﬁlled with liquids, such as vases, on

or near the product.

• Keep the product away from ﬁre and heat sources. Do NOT place naked ﬂame sources, such as lighted candles, on

or near the product.

• Do NOT make unauthorized alterations to this product.

• Do NOT use a power inverter with this product.

• Do NOT use in vehicles or boats.

• The speaker wire and interconnect cables included with this system are not approved for in-wall installation. Please

check your local building codes for the correct type of wire and cable required for in-wall installation.

• Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain

readily operable.

仅适用于 2000m 以下地区安全使用

Use at altitude less than 2000 meters only.

• Due to ventilation requirements, Bose does not recommend placing the product in a conﬁned space such as in a

wall cavity or in an enclosed cabinet.

• The product label is located on the bottom of the product.

4

|

ENG

REGULATORY AND LEGAL INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment o and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modiﬁcations not expressly approved by Bose Corporation could void the user’s authority to operate

this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

This device complies with FCC and ISED Canada radiation exposure limits set forth for general population.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This device for operation in the 5150 - 5250 MHz is only for indoor use to reduce the potential for harmful interference

to co-channel mobile satellite systems.

Receiver Category = 2

CAN ICES-3(B)/NMB-3(B)

For Europe:

Frequency bands of operation 2400 to 2483.5 MHz, 5150 to 5350 MHz, and 5470 to 5725 MHz.

Maximum transmit power less than 20 dBm EIRP.

Frequency band of operation 5725 to 5850 MHz.

Maximum transmit power less than 14 dBm (25mW) EIRP.

Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per

applicable regulations.

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member

States listed in the table.

BE DK IE UK(NI) FR CY SK HU AT SE

BG DE PT EL HR LV LT MT PL

CZ EE FI ES IT RO LU NL SI

This symbol means the product must not be discarded as household waste, and should be delivered to an

appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,

human health and the environment. For more information on disposal and recycling of this product, contact

your local municipality, disposal service, or the shop where you bought this product.

5

|

ENG

REGULATORY AND LEGAL INFORMATION

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by

the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter

original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not inﬂuence aircraft security and interfere legal communications; If

found, the user shall cease operating immediately until no interference is achieved. The said legal communications

means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM

radio wave radiated devices.

Product Power State Table

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC and

the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, is in

compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation

(EU) No. 801/2013.

Required Power State Information Power Modes

Standby Networked Standby

Power consumption in speciﬁed power mode, at 230V/50Hz

input

Time after which equipment is automatically switched into mode

Power consumption in networked standby if all wired network

ports are connected and all wireless network ports are activated,

at 230V/50Hz input

< 0.5 W

< 2 hours

N/A

Bose Wireless < 2.0 W

< 20 minutes

< 2.0 W

Network port deactivation/activation procedures. Deactivating

all networks will enable standby mode.

Per Annex II 3(a) of Regulation 801/2013 (“Lot 26”

amendment of 1275/2008), the requirement to deactivate

a wireless port “does not apply to products which rely on a

single wireless network connection for intended use and have

no wired network connection.”

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

Toxic or Hazardous Substances and Elements

Part Name Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

(CR(VI))

Polybrominated

Biphenyl

(PBB)

Polybrominated

diphenylether

(PBDE)

PCBs X O O O O O

Metal Parts X O O O O O

Plastic Parts O O O O O O

Speakers X O O O O O

Cables X O O O O O

This table is prepared in accordance with the provisions of SJ/T 11364.

O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part

is below the limit requirement of GB/T 26572.

X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials

used for this part is above the limit requirement of GB/T 26572.

6

|

ENG

REGULATORY AND LEGAL INFORMATION

Taiwan Restriction of Hazardous Substances Table

Equipment name: Bass Module, Type designation: 420132

Restricted substances and its chemical symbols

Unit Lead

(Pb) Mercury (Hg) Cadmium (Cd) Hexavalent

chromium (Cr+6)

Polybrominated

biphenyls (PBB)

Polybrominated

diphenyl ethers

(PBDE)

PCBs -○ ○ ○ ○ ○

Metal Parts -○ ○ ○ ○ ○

Plastic Parts ○ ○ ○ ○ ○ ○

Speakers -○ ○ ○ ○ ○

Cables -○ ○ ○ ○ ○

Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value

of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “1” is 2011 or 2021.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North Riying Road, China

(Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan

Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000

México, D.F. Phone Number: +5255 (5202) 3545

UK Importer: Bose Limited, Bose House, Quayside Chatham Maritime, Chatham, Kent, ME4 4QZ, United Kingdom

Input Rating: 100-240V 50/60 Hz, 180W

The CMIIT ID is located on the bottom of the bass module.

Please complete and retain for your records

The serial and model numbers are located on the bottom of the bass module.

Serial number: ____________________________________________________________________

Model number: ____________________________________________________________________

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product.

You can easily do this by going to global.Bose.com/registerglobal.Bose.com/register

7

|

ENG

REGULATORY AND LEGAL INFORMATION

Security Information

This product is capable of receiving automatic security updates from Bose. To receive automatic security

updates, you must complete the product setup process in the Bose Music app and connect the product to

the Internet. If you do not complete the setup process, you will be responsible for installing security

updates that Bose makes available.

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a

service mark of Apple Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such

marks by Bose Corporation is under license.

Google and Google Play are trademarks of Google LLC.

Acoustimass, ADAPTiQ, Bose, Bose Bass Module, Bose Music, the Bose Music logo, Bose Smart Soundbar,

Bose TV Speaker, Lifestyle, SoundTouch, the wireless note design, and UNIFY are registered trademarks of Bose

Corporation in the U.S. and other countries.

Bose Corporation Headquarters: 1-877-230-5639

prior written permission.

8

|

ENG

CONTENTS

WHAT’S IN THE CARTON

Contents ............................................................................................................................. 10

BASS MODULE PLACEMENT

Recommendations.......................................................................................................... 11

Placing a second bass module .......................................................................... 12

POWER

Connect the bass module to power ........................................................................ 13

CONNECT TO A SOUNDBAR OR SPEAKER

Choose your connection method ............................................................................. 14

Connect using the Bose music app ......................................................................... 15

New to the Bose Music app? .............................................................................. 15

Connect using the SoundTouch 300 remote ....................................................... 16

Check for sound ...................................................................................................... 16

Connect using an audio cable ................................................................................... 17

Connect a second bass module (optional) ........................................................... 19

Compatible bass modules ................................................................................... 19

Connect to a Bose Smart Soundbar or SoundTouch 300 soundbar . 19

Connect to a Lifestyle 650/600 home entertainment system ............. 19

BASS MODULE STATUS

Status light ........................................................................................................................ 20

CARE AND MAINTENANCE

Clean the bass module ................................................................................................. 21

Replacement parts and accessories ........................................................................ 21

Limited warranty ............................................................................................................. 21

9

|

ENG

CONTENTS

TROUBLESHOOTING

Try these solutions ﬁrst ................................................................................................ 22

Other solutions ................................................................................................................ 22

REFERENCE

Access your soundbar or speaker owner’s guide .............................................. 24

10

|

ENG

WHAT’S IN THE CARTON

CONTENTS

Conﬁrm that the following parts are included:

Bose Bass Module 700 Power cord*

*May ship with multiple power cords. Use the power cord for your region.

NOTE: If any part of the product is damaged or if the glass on the bass module

is broken, do NOT use it. Contact your authorized Bose dealer or Bose

customer service.

Visit: worldwide.Bose.com/Supportworldwide.Bose.com/Support

11

|

ENG

BASS MODULE PLACEMENT

RECOMMENDATIONS

For best performance, follow these recommendations when placing the bass module:

Do NOT place any objects on top of the bass module.

To avoid wireless interference, keep other wireless equipment 1 – 3 ft. (0.3 –

0.9 m) away from the bass module. Place the bass module outside and away

from metal cabinets, other audio/video components and direct heat sources.

Place the bass module on a stable and level surface. Vibration can cause the bass

module to move, particularly on smooth surfaces like marble, glass or highly

polished wood.

Place the bass module along the same wall as your TV, or along any other wall in

the front third of the room.

Keep the front side of the bass module (the side opposite the POWER connector)

at least 3 in. (7.6 cm) from any other surface. Blocking the port on the bottom of

this side may aect acoustic performance.

For more bass, place the bass module closer to walls and corners. For less bass,

place the bass module further from walls and corners.

Make sure there is an AC (mains) outlet nearby.

CAUTION: Do NOT place the bass module on its top or sides when in use.

BASS MODULE PLACEMENT

12

|

ENG

Placing a second bass module

Try placing each bass module in multiple locations to see what sounds best for your

listening area. After placing a module in a new location, run ADAPTiQ audio calibration

using the instructions in your soundbar owner’s guide (see page 24). For more

bass, place the modules closer to each other or closer to walls and corners.

13

|

ENG

CONNECT THE BASS MODULE TO POWER

1. Connect the power cord to the b connector on the bass module.

2. Plug the other end of the power cord into an AC (mains) power outlet.

POWER

14

|

ENG

CONNECT TO A SOUNDBAR OR SPEAKER

CHOOSE YOUR CONNECTION METHOD

The way you connect the bass module depends on your soundbar or speaker.

Choose your connection method from the table below.

SOUNDBAR OR SPEAKER CONNECTION METHOD

Bose Smart Soundbar

(voice-enabled soundbar)

Connect using the Bose Music app (see page 15).

NOTE: If you can’t access or have trouble

connecting using the Bose Music app,

see “Troubleshooting” on page 22.

SoundTouch 300 soundbar Connect using your soundbar’s remote

(see page 16).

Bose TV Speaker (or alternate

wired setup for soundbars)

Connect using an audio cable (not provided)

(see page 17).

CONNECT TO A SOUNDBAR OR SPEAKER

15

|

ENG

CONNECT USING THE BOSE MUSIC APP

1. In the Bose Music app, select your soundbar.

2. Go to the Settings menu to add your bass module.

New to the Bose Music app?

1. On your mobile device, download the Bose Music app.

BOSE MUSIC

2. Follow the app instructions.

CONNECT TO A SOUNDBAR OR SPEAKER

16

|

ENG

CONNECT USING THE SOUNDTOUCH 300 REMOTE

1. On the SoundTouch 300 remote, press the SoundTouch button e.

2. Press and hold k until the connectivity light l on the soundbar blinks white.

Once connected, you hear a tone. The light on the back of the bass module and

l on the soundbar glow white.

NOTES: Connecting may take several minutes.

If the bass module doesn’t connect to the soundbar, see “Troubleshooting”

on page 22.

Check for sound

NOTE: To avoid hearing distorted audio, turn o your TV speakers. Refer to your TV

owner’s guide for more information.

1. Power on your TV.

2. If you are using a cable/satellite box or other secondary source:

a. Power on this source.

b. If this source is connected to your TV, select the appropriate TV input.

3. Power on the soundbar.

You hear sound coming from the bass module.

NOTE: If you do not hear sound from the bass module, see “Troubleshooting” on

page 22.

CONNECT TO A SOUNDBAR OR SPEAKER

17

|

ENG

CONNECT USING AN AUDIO CABLE

You can connect the module to the soundbar or speaker using a 3.5 mm audio cable

(not provided).

If you don’t have a 3.5 mm audio cable (commonly used for headphones and

mobile devices), visit Bose.com/BM700Bose.com/BM700 to purchase a

15 ft. (4.5 m) cable. You can also purchase this part at your local electronics store.

1. Connect one end of a 3.5 mm audio cable to the x connector on the

bass module.

CONNECT TO A SOUNDBAR OR SPEAKER

18

|

ENG

2. Connect the other end of the cable to the h connector on the back of the

soundbar or speaker.

BASS

NOTES:

Bose Smart Soundbar: Make sure to connect the cable to the h connector,

not the C connector.

Bose TV Speaker: Make sure to connect the cable to the h connector, not the

B connector.

SoundTouch 300 soundbar: Connect the cable to the p connector.

3. Check for sound (see page 16).

CONNECT TO A SOUNDBAR OR SPEAKER

19

|

ENG

CONNECT A SECOND BASS MODULE (OPTIONAL)

Connecting a second bass module may produce more consistent or powerful bass

throughout your listening area.

NOTES:

For more information about placing a second bass module, see page 12.

If your current bass module is connected to your soundbar or system with a

3.5 mm audio cable (see page 17), you can’t connect a second bass module.

Compatible bass modules

You can connect a Bose Bass Module 700 or an Acoustimass 300 bass module as a

second bass module.

Connect to a Bose Smart Soundbar or

SoundTouch 300 soundbar

Choose the connection method that’s appropriate for your soundbar

(see page 14).

Connect to a Lifestyle 650/600 home entertainment system

1. On the Lifestyle 650/600 remote, press SETUP.

2. From the UNIFY menu, select Speaker Management, then select

Setup Second Bass Module.

3. Follow the on-screen instructions to connect your second bass module.

20

|

ENG

BASS MODULE STATUS

STATUS LIGHT

The light on the back of the module shows system status.

LIGHT ACTIVITY SYSTEM STATE

Solid white Connected to the soundbar or speaker

Blinking white Downloading a software update

Solid amber Network standby (wireless connection)

Blinking amber Ready to connect to the soundbar or speaker

O Power-saving mode (wired connection)

Blinking red Error - contact Bose customer service

La pagina si sta caricando...

Bose Bass Module 700 Guida utente

Bose Bass Module 700 Guida utente

in altre lingue

Documenti correlati

Altri documenti