Linn Akurate DS Manuale del proprietario

Tipo
Manuale del proprietario
OWNER’S MANUAL
AKURATE DS
DIGITAL STREAM PLAYER
i
AKURATE DS
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use the apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarised or grounding type plug. A
polarised plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and at the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods
of time.
14. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug has been damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
15. Wall or ceiling mounting. Mount the apparatus to a wall or ceiling only as
recommended by the manufacturer.
16. Power sources. Connect the apparatus to a power supply only of the type
described in the operating instructions or marked on the apparatus.
17. Mains plug. Use the mains plug to disconnect the apparatus from the mains
supply. The mains plug must be accessible at all times. Use the mains switch
(if applicable) when the apparatus is not in use.
18. Power lines. An outdoor antenna should be located away from power lines.
19. Outdoor antenna grounding. If an outdoor antenna is connected to the
apparatus, ensure that the antenna system is grounded to provide some
protection against voltage surges and static build up. In the USA see article
810 of the National Electrical Code ANSI/NFPA 70 concerning installation
requirements.
20. Telephone line. Do not connect the apparatus to a telephone line except where
specifically instructed to do so.
21. Objects and liquid entry. Do not let objects or liquids fall into the apparatus.
Do not expose the apparatus to dripping or splashing. Do not place a vessel
containing liquid on top of the apparatus.
22. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
23. The apparatus has been designed for use in moderate and tropical climates.
24. This apparatus is supplied with a remote control unit which contains replaceable
non-rechargeable batteries. The remote control unit and the batteries must not
be exposed to excessive heat such as sunshine, fire or the like. The disposal of
used batteries should be in accordance with local re-cycling and waste disposal
regulations. Never dispose of batteries in a fire because they may explode and
cause injury.
ii
AKURATE DS
Explanation of symbols used in this manual or on the rear/underside of the
apparatus:
This symbol is intended to alert the user to the presence of uninsulated
dangerous voltages within the enclosure of sufficient magnitude to
cause electric shock.
This symbol is intended to alert the user to the presence of important
operation, maintenance and servicing information in the instruction and
service manuals.
For apparatus connected to the mains electricity supply
CAUTION
To reduce the risk of electric shock do not remove the cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
Replace the mains fuse in the plug with one of the same type
and rating.
Disconnect supply cord before changing fuse.
WARNING
To reduce the risk of fire or electric shock do not expose this
apparatus to rain or moisture. Shock hazard - do not open.
MAINS PLUGS
This apparatus is supplied with a non-rewireable mains plug for the
intended country.
Replacement mains leads can be obtained from your Linn retailer.
Should you need to change the plug please dispose of it carefully. A plug
with bared conductors is dangerous if engaged in a live socket.
The Brown wire must be connected to the Live (Line) supply pin.
The Blue wire must be connected to the Neutral supply pin.
The Green/Yellow wire must be connected to the Earth (Ground)
supply pin.
Please contact your retailer or a competent electrician if you are in any doubt.
Refer to the rear or underside of the product for fuse and power
consumption information.
IMPORTANT SAFETY INSTRUCTIONS
Fuse replacement
This appliance is fitted with a non-rewireable 13 amp mains plug. The plug
contains a 5 amp fuse. If the fuse has blown it can be replaced as follows:
a) Pull out the red fuse cover/carrier.
b) Remove and dispose of the blown fuse.
c) Fit a new 5 amp BS1362 approved fuse into the carrier and push the
carrier back into the plug.
Always ensure the fuse cover is fitted. If the fuse cover is missing do not use
the plug. Contact your Linn retailer to obtain a replacement fuse cover.
Fuses are for fire protection and do not protect against electric shock.
Mains plug replacement
Should your mains plug need replacing and you are competent to do
this proceed as follows. If you are in doubt contact your Linn retailer or a
competent electrician.
a) Disconnect the plug from the mains supply.
b) Cut off the plug and dispose of it safely. A plug with bared conductors is
dangerous if engaged in a live socket.
c) Only fit a 13 amp BS1363A approved plug with a 5 amp fuse.
d) The cable wire colours or a letter will be marked at the connection points
of most quality plugs.
Attach the wires securely to their respective points. The Brown wire must go
to the Live pin, the Blue wire must go to the Neutral pin, and the Green/Yellow
wire must go to the Earth pin.
e) Before replacing the plug top ensure that the cable restraint is holding
the outer sheath of the cable firmly and that the wires are correctly
connected.
WARNING
THIS APPLIANCE MUST BE EARTHED.
Linn Products Ltd declare that this product is in conformance with the Low
Voltage Directive 73/23/EEC and Electromagnetic Compatibility 89/336/EEC
as amended by 92/31/EEC and 93/68/EEC.
The conformity of the designated product with the provisions of Directive
number 73/23/EEC (LVD) is proved by full compliance with the following
standards:
Standard number Date of issue Test type
EN60065 2002 General requirements
Marking
Hazardous radiation
Heating under normal conditions
Shock hazards under normal
operating conditions
Insulation requirements
Fault conditions
Mechanical strength
Parts connected to the mains
supply
Components
Terminal devices
External flexible cords
Electrical connections and
mechanical fixings
Protection against electric shock
Stability and mechanical hazards
Resistance to fire
The conformity of the designated product with the provisions of Directive
number 89/336/EEC (EMC) is proved by full compliance with the following
standards:
Standard number Date of issue Test type
EN55013 2001 Conducted emissions
EN55013 2001 Absorbed emissions
EN55020 2002 Immunity
UK Users Please Read This
Important Safety Information
CE Declaration of Conformity
iii
AKURATE DS
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Waste Electrical and Electronic Equipment Directive Directive 2002/96/
EC of the European Parliament and of the Council
The symbol (right) is shown on this product. It indicates that the
product should not be disposed of with regular household waste,
but should be disposed of separately.
Electrical and electronic equipment can contain materials that are hazardous
to the environment and human health and therefore should be disposed of
at a designated waste facility or returned to your retailer for the appropriate
recycling to take place (see www.linn.co.uk for further information).
If you wish to dispose of this product and the product still functions, please
consider recycling/reusing it by donating it to a charity shop, selling it or part-
exchanging it with your retailer.
FCC notice
Waste Electrical and Electronic Equipment
(WEEE) Directive
Copyright © 2007 Linn Products Ltd. First edition November 2007.
Linn Products Limited, Glasgow Road, Waterfoot, Eaglesham, Glasgow,
G76 OEQ, Scotland, United Kingdom
All rights reserved. No part of this publication may be reproduced, stored in
a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, without the prior written
permission of the publisher.
The content of this manual is furnished for information use only, is subject to
change without notice, and should not be construed as a commitment by
Linn Products Limited. Linn Products Limited assumes no responsibility or
liability for any errors or inaccuracies that may appear in this manual.
Trade marks used in this publication: Linn and the Linn logo are registered
trade marks of Linn Products Limited. Akurate and Klimax are trade marks
of Linn Products Limited.
UPnP™ is a certification mark of the UPnP Implementers Corporation.
Linn Products Limited disclaims any proprietary interest in trade marks and
trade names other than its own.
Pack 1369/E
Copyright and Acknowledgements
iv
AKURATE DS
v
INTRODUCTION 1
INSTALLATION 2
Unpacking 2
Positioning 2
Cleaning 2
Connecting to the mains supply 2
OPERATION 3
Playing music 3
Selecting music 3
Controlling playback 5
Current Playlist 6
Volume 6
Standby 6
Front panel and handset 7
Front panel 7
Handset 8
Front panel display 9
Adding music to the library 9
TECHNICAL SPECIFICATION 10
GUARANTEE AND SERVICE 11
THIRD-PARTY COPYRIGHT INFORMATION 12
CONTENTS
AKURATE DS
AKURATE DS
Since Linn’s inception with the production of the Sondek LP12 turntable in
1972, our aspiration has been to get you as close to the sound of the original
recording as possible.
Over the many years since, we have remained committed to this goal by
exploiting the latest developments in hi-fi technology. The Akurate DS digital
stream player exemplifies this commitment and dedication. Developed from
our flagship Klimax DS player, it utilises sophisticated processing of the digital
audio signal drawn from an external storage device, to produce crystal-clear,
error-free audio. The advanced circuitry, combined with an absence of any
mechanical noise due to their being no moving parts, ensures the Akurate DS
delivers astounding musical performance. The Linn GUI is a simple and fun
interface to use, and provides instant access to your CD and downloaded
music collection.
In partnership with the Akurate Kontrol pre-amplifier, Akurate power amplifiers
and Akurate loudspeakers, we are certain that you will be astonished by the
quality of your Linn system now, and in the years to come.
INTRODUCTION
1
AKURATE DS
Important:
The Akurate DS player must be installed by an engineer/technician trained
in networks and network security. Linn Products Limited cannot be held
responsible for any network security compromise and/or loss of data due to
improper installation.
Unpacking
The Akurate DS player is supplied with the following:
• handset
2 x AAA batteries for the handset
1 pair of black interconnect cables
• RS232 lead
• mains lead
CD-ROM (contains system software, installation manual and
owner’s manual)
We recommend that you retain all packaging in case you need to transport
the Akurate DS at a later date.
Positioning
You can position your Akurate DS almost anywhere you find convenient, but
please consider the following points:
The unit should be placed on a flat, stable and rigid surface.
Do not position the unit where sunlight can shine (whether directly,
diffused or reflected) on its display as the infra-red (IR) radiation in
sunlight will be picked up by the unit’s IR remote sensor and this can
adversely affect its operation. Similarly, some electrical devices such
as plasma TVs, fluorescent lights and energy saving lamps can emit IR
which can likewise affect the operation.
For best performance do not stack the unit with other products. Ideally,
position the unit on a shelf by itself or, if proximity to other products is
unavoidable, positioning side-by-side is preferable to stacking.
The unit should not be situated above, or directly adjacent to, sources of
heat such as radiators, power amplifiers etc. Nor should it be enclosed in
a cabinet with such devices.
INSTALLATION
The unit itself produces very little heat; however it is advisable to allow a
little space to the sides, rear and above the unit (ideally 10 cm / 4”) for air
circulation which will allow any heat to dissipate.
Cleaning
Disconnect the Akurate DS from the power supply before cleaning. Remove
dust and fingerprints with a soft, dry cloth.
Connecting to the mains supply
The Akurate DS contains an automatic internal mains voltage switch. This
switch operates on all worldwide mains voltages from 100 V to 240 V. The unit
can be connected to any worldwide mains voltage with no adjustment.
This unit must be earthed. Use the earthed moulded mains lead
supplied, or if no mains earth is available, ensure the product’s
EARTH GROUND connector is connected to an earthing terminal.
2
AKURATE DS
3
OPERATION
Playing music
If you are using a Linn Akurate Kontrol pre-amplifier with the Akurate DS,
switch on the Akurate Kontrol first and wait for it to show the
(standby)
symbol before powering-up the Akurate DS. When the Akurate DS is
switched on, a flashing dot will appear on the display. Wait until the dot is
replaced by the
symbol before following the steps below.
3. From the Source window, select ‘Akurate DS’.
4. From the Library window, select the storage device that
contains the music you want to listen to by tapping it twice.
2. From the Room window, select the appropriate room. This will
automatically bring your Akurate DS (and Akurate Kontrol) out of
standby.
1. Turn on your control device. If the Linn GUI does not run automatically,
double-click the Linn GUI icon.
Selecting music
AKURATE DS
4
5. Tap ‘Music’ twice.
Note:
When using the Linn GUI, tap
in the top of the left-hand window to
return to the previous screen.
6. Select the category you want to browse by tapping it twice.
8. The folder symbol indicates that an item contains sub items (e.g. a
folder will be shown next to the name of an album to indicate that the
album’s tracks are held within the folder). Tap an item to highlight it, then
tap it again to reveal the contents of the folder.
7. Scroll to the music you want to play by placing the control device’s
stylus in the left-hand window and ‘drawing’ circles (clockwise to scroll
downwards, anti-clockwise for upwards).
Alternatively, tap the symbol to add the selection to the Current
Playlist window. To start playback, tap the selection within the Current
Playlist window to highlight it, then tap .
9. To play an album, track, or all tracks by a particular artist (depending on
the view you are currently on), tap the selection to highlight it, then tap
.
Your selection will move to the Current Playlist window and playback will
begin.
AKURATE DS
5
10. Continue to add selections to the Current Playlist by highlighting artists/
albums/tracks and tapping the symbol. You can add new selections
to the bottom of the playlist, or place them after the currently playing
track (if playback has not started they will be added to the top of the
playlist). The icon shown at the bottom-right of the left-hand window
determines where the selection will be placed. This icon means
that the selection will be placed at the bottom of the playlist. This icon
means that the selection will be placed after the currently playing track.
Tap the icon to change it.
Note:
Up to 1,000 tracks can be added to the Current Playlist. The bar at the
bottom of the Current Playlist window tells you how many tracks are in the
playlist.
Controlling playback
Control playback by using the icons.
While a track is playing, tapping will restart it, unless another selection
is currently highlighted in which case the highlighted track will begin playing.
Tap on the progress bar to jump forward or backwards within the currently
playing track.
Note:
You can also control playback using the front panel keys or the supplied
handset, see Front panel and handset, pages 7 to 9.
AKURATE DS
6
Volume
You can use the icons on the Linn GUI to control volume
if your Akurate DS is connected to a Linn Akurate Kontrol pre-amplifier.
Volume range on the Akurate Kontrol is from 0 to 100 (unless Volume Limit on
the Akurate Kontrol has been set to less than 100).
Note:
If the Linn pre-amplifier in your system is not an Akurate Kontrol, you can
adjust the volume using the handset supplied with the Akurate DS or
pre-amplifier, or the pre-amplifier’s front panel keys.
Standby
To put the Akurate DS into standby using the Linn GUI, tap the source/room
key at the top-right of the GUI, then tap the
icon for the appropriate room,
in the left-hand window.
The Akurate DS can also be put into or out of standby using the key on
the front panel or handset.
Note:
The tracks in the Current Playlist will remain there if the Akurate DS is put into
then brought out of standby.
Current Playlist
Scroll up and down through the playlist by placing the control device’s stylus
in the Current Playlist window and ‘drawing’ circles (clockwise to scroll
downwards, anti-clockwise for upwards).
Play any track in the Current Playlist by highlighting it, then tapping
Playback of the playlist will continue from that point.
Note:
The tracks in the Current Playlist will remain there if the Akurate DS is put into
then brought out of standby.
To delete individual tracks from the playlist:
Tap on the track you wish to delete.
Tap the symbol next to the track’s title.
To delete the entire playlist:
Tap the symbol at the top-right of the Current Playlist window.
.
AKURATE DS
7
Front panel and handset
Once you have added tracks to the Current Playlist, you can use the front
panel keys or supplied handset to control playback.
Front panel
1. DISPLAY Cycles through the various display modes
2. Front panel display
3.
Brings the unit out of, or puts into, standby
4.
Previous track selection. Press and hold to skip backwards through
the tracks in the Current Playlist
5.
Next track selection. Press and hold to skip forwards through the
tracks in the Current Playlist
6.
Stops playback
7.
Starts playback of the Current Playlist. If playback has been started
and then stopped, pressing
will begin playback from the start
of the last track played. During playback, a quick press of will
pause playback. Press
again to resume playback. Press and
hold
for two seconds to replay the current track.
Note:
You can control playback of the Current Playlist using the handset or front
panel, even if the Linn GUI has been turned off.
AKURATE DS
DISPLAY
1
4 65 7
2 3
AKURATE DS
8
1. LEDs Indicate the mode of the handset when a key is pressed
2. DVD Puts the handset into Disc mode. The handset should be in Disc
mode to operate the Akurate DS
3.
Stops playback
4.
Starts playback of the Current Playlist. If playback has been
started and then stopped, pressing
will begin playback from the
start of the last track played
5.
; Pauses playback
6.
7 Fast search backwards
7.
8 Fast search forwards
8. DISP Cycles through track information on the front panel display
9.
Enters/exits standby
10.
9 Previous track selection
11.
: Next track selection
Keys and functions of the handset not listed above do not function with the
Akurate DS player but may with other Linn products.
Note:
You can control playback of the Current Playlist using the handset or front
panel, even if the Linn GUI has been turned off.
Handset
1
2
4
8
5
6
7
3
9
11
10
AKURATE DS
9
Handset modes
The handset has been designed to provide simpler, more intuitive control
over a range of Linn products. In order to achieve this, the handset can be
operated in various handset modes which assign differing functionality to
some of the keys. The handset mode is indicated by the LEDs at the top-left
of the handset, which will light when a key is pressed.
The handset should be used in Disc mode for operating the Akurate DS.
Disc mode – press the DVD key to set the handset to Disc mode. The DVD
functions will be assigned as the primary handset keys and the DVD LED will
light when a key is pressed.
Note:
Volume control is always available, regardless of the mode the handset is in.
If you are using a Linn pre-amplifier or AV system controller with your
Akurate DS, you can use the same handset to operate both Linn products.
For some functionality you may have to use the DVD and AMP buttons to
switch between handset modes.
Front panel display
Key to symbols shown on the front panel display:
Play
; Pause
Stop
: Skip to next track
9 Skip to previous track
8 Fast search forwards
7 Fast search backwards
Standby
The front panel of the Akurate DS displays information relating to the currently
playing track. Repeatedly press DISP on the handset, or DISPLAY on the
front panel, to cycle through the information in the following order:
Elapsed track time
Remaining track time
Track audio data (sample rate/bit depth)
Track encoding data (kilobits per second/format)
Track number within total number of tracks in the playlist
Track title *
Artist *
Album title *
Regardless of the information shown on the display, you can see the currently
playing track title, artist and album title by pressing and holding DISP or
DISPLAY for two seconds.
Whenever a new track begins playing (or playback has been stopped then
restarted), the track title, artist name and album title will scroll across the
display.** While the text is scrolling, pressing DISP or DISPLAY will return the
display to the previous view.
* If the text is too long to appear in full on the display, press and hold DISP or
DISPLAY for two seconds to see the whole text scroll.
** This feature can be turned off or on via the Linn Configuration software
supplied with the Akurate DS. (Adjustments made to the system via the
Linn Configuration software should only be done by your Linn installer.)
Adding music to the library
If you wish to add a CD to your music library, insert the CD into the PC that
is connected to your storage device (NAS) and, using the ripping software
configured by your Linn installer, rip the CD. Once the CD has been ripped it
will automatically be added to the music library on the Linn GUI.
AKURATE DS
10
TECHNICAL SPECIFICATION
Date of introduction November 2007
Type Digital stream player
Size (H) 80 mm x (W) 381 mm x (D) 360 mm
(H) 3.1 inches x (W) 15 inches x (D) 14.2 inches
Weight 4.2 kg
9.2 lb
Supported file types WAV, FLAC, MP3
Audio sample rates 44.1 k, 48 k, 88.2 k, 96 k, 176.4 k, 192 k
Word depths 16 – 24 bits
Analogue audio
outputs
Stereo RCA phono sockets, stereo XLR
balanced audio outputs
Ethernet interface 100Base-T RJ45
Control protocol Compatible with UPnP
media servers,
UPnP
AV 1.0 control points
Local control Front panel 6 button interface
RS232 x 4
Luminous remote control handset
128 x 32 front panel display
Power supply Switching power supply with auto-ranging
(AC 100 – 120 V @ 50 – 60 Hz)
(AC 220 – 240 V @ 50 – 60 Hz)
Power consumption 13 W
AKURATE DS
This product is guaranteed under the conditions which apply in the country of
purchase and your statutory rights are not limited. In addition to any statutory
rights you may have, Linn undertake to replace any parts which have failed
due to faulty manufacture. To help us, please ask your Linn retailer about the
Linn warranty scheme in operation in your country.
In parts of Europe, the United States of America and some other markets,
extended warranty may be available to customers who register their purchase
with Linn. A warranty registration card is included with the product and should
be returned to Linn as soon as possible. Alternatively, you can register your
warranty online at www.linn.co.uk.
WARNING
Unauthorised servicing or dismantling of the product invalidates the
manufacturer’s warranty. There are no user serviceable parts inside the
product and all enquiries relating to product servicing should be referred to
authorised retailers only.
Technical support and information
For technical support, product queries and information, please contact either
your local retailer or one of the Linn offices opposite.
Full details of your local retailer/distributor can be found on the Linn web site:
www.linn.co.uk.
Important
Please keep a copy of the sales receipt to verify the purchase date of the
product.
Please ensure that your equipment is insured by you during any transit or
shipment for repair.
GUARANTEE AND SERVICE
Linn Products Limited
Glasgow Road, Waterfoot, Eaglesham, Glasgow G76 0EQ, Scotland, UK
Phone: +44 (0)141 307 7777
Fax: +44 (0)141 644 4262
Helpline: 0500 888909
www.linn.co.uk
Linn Incorporated
8787 Perimeter Park Boulevard, Jacksonville, FL 32216, USA
Phone: +1 (904) 645 5242
Fax: +1 (904) 645 7275
Helpline: 888-671-LINN
www.linninc.com
Linn Deutschland GmbH
Hühnerposten 1d, D-20097 Hamburg, Deutschland
Phone: +49-(0) 40-890 660-0
Fax: +49-(0) 40-890 660-29
www.linn.co.uk
11
AKURATE DS
12
The Akurate DS uses software from rtems.com, the Xiph.org foundation, and
FreeBSD.
Rtems.com:
LICENSE INFORMATION
RTEMS is free software; you can redistribute it and/or modify it under terms
of the GNU General Public License as published by the Free Software
Foundation; either version 2, or (at your option) any later version. RTEMS is
distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MERCHANTABILITY or FITNESS FOR
A PARTICULAR PURPOSE. See the GNU General Public License for more
details. You should have received a copy of the GNU General Public License
along with RTEMS; see file COPYING. If not, write to the Free Software
Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
As a special exception, including RTEMS header files in a file, instantiating
RTEMS generics or templates, or linking other files with RTEMS objects to
produce an executable application, does not by itself cause the resulting
executable application to be covered by the GNU General Public License. This
exception does not however invalidate any other reasons why the executable
file might be covered by the GNU Public License.
A copy of the GPL is included on the accompanying CD-Rom in the licenses
directory.
Information on obtaining access to the GPL code used in this product is
available at http://oss.linn.co.uk
Alternatively, write to Open Source Software Licensing, Linn Products Limited,
Glasgow Road, Waterfoot, Eaglesham, Glasgow G76 0EQ, Scotland, UK
THIRD-PARTY COPYRIGHT
INFORMATION Flac from the Xiph.org foundation:
Copyright © 2000,2001,2002,2003,2004,2005,2006,2007 Josh Coalson
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
Neither the name of the Xiph.org Foundation nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS “AS IS’’ AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49

Linn Akurate DS Manuale del proprietario

Tipo
Manuale del proprietario