Samsung SR20M7059US Manuale utente

Tipo
Manuale utente
POWERbot
Quick reference guide
SR1*M70****, SR2*M70**** Series
Before operating this unit, please read the instructions carefully.
For indoor use only.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 1 2020-01-13 오후 9:56:39
English-2
Parts list
1
Main
body
Basic
Parts
Remote
controller
Docking
Station
Batteries
(AAA type)
(Optional)
Quick reference
guide
Spare lter
(Optional)
Accessories may
differ depending
on the models.
Power cord Battery Charger Virtual guard
(Optional)
[A Type] [B Type] [C Type] [D Type]
(Not included with
SR1*M701*** Series)
1_VR7000_Q_guide_EN_00763K-13_SW.indd 2 2020-01-13 오후 9:56:41
English-3
Safety information
2-1
Before operating the appliance, please
read this manual thoroughly and retain
it for your reference.
Because these following operating
instructions cover various models, the
characteristics of your vacuum cleaner
may differ slightly from those described
in this manual.
Caution/Warning symbols used
WARNING
Indicates that a danger of death or serious
injury exists.
CAUTION
Indicates that a risk of personal injury or
material damage exists.
Other symbols used
NOTE
Indicates that the following text contains
additional important information.
For information on Samsung’s
environmental commitments
and product specic regulatory
obligations e.g. REACH (WEEE,
Batteries) visit: samsung.com/uk/
aboutsamsung/samsungelectronics/
corporatecitizenship/data_corner.html
Important safety instructions
When using an electrical appliance, basic
precautions should be observed, including
the following:
Read all instrucrions before using your
robot vacuum cleaner.
Unplug the battery charger / docking
station from outlet when not in use and
before conducting maintenance.
WARNING
To reduce the risk of re, electric
shock, or injury:
General
Use only as described in this manual.
Do not operate POWERbot or the
battery charger / docking station if it
has been damaged in any way.
If the vacuum cleaner is not working as
it should, has been dropped, damaged,
left outdoors, or dropped in water,
return it to a customer care center.
Do not handle the battery charger /
docking station or POWERbot with wet
hands.
Use only on dry, indoor surfaces.
This appliance can be used by children
aged from 8years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
If the supply cord is damaged, it must
be replaced by the manufacturer or its
service agent or a similarly qualied
person in order to avoid a hazard.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 3 2020-01-13 오후 9:56:41
English-4
Safety information
2-2
Battery charger / Docking station
Do not modify the polarized plug to t a
non-polarized outlet or extension cord.
Do not use outdoors or on wet surfaces.
Unplug the battery charger / docking
station from the outlet when not in use
and before servicing.
Use only the battery charger / docking
station supplied by the manufacturer to
recharge.
Do not use with a damaged cord or plug
or a loose power outlet.
Do not pull or carry by the cord, use
the cord as a handle, close the door on
the cord, or pull the cord around sharp
edges or corners. Keep the cord away
from heated surfaces.
Do not use extension cords or outlets
with inadequate current carrying
capacity.
Do not unplug by pulling on the cord. To
unplug, grasp the plug, not the cord.
Do not mutilate or incinerate batteries as
they will explode at high temperatures.
Do not attempt to open the battery
charger / docking station. Repairs
should only be carried out by a qualied
customer care center.
Do not expose the battery charger /
docking station to high temperatures or
allow moisture or humidity of any kind
to come into contact with the battery
charger / docking station.
Do not charge the non-rechargeable
batteries with charger.
COMMISSION REGULATION (EU)
2019/1782
Ecodesign requirements for external
power supplies : www.samsung.com/
global/ecodesign_component
POWERbot
Do not pick up hard or sharp objects
such as glass, nails, screws, coins, and
etc.
Do not use without a lter in place.
When servicing the unit, never put
ngers or other objects into the fan
chamber in case the unit accidentally
turns on.
Do not put any objects into openings.
Do not use with any openings blocked;
keep openings free of dust, lint, hair, and
anything that may reduce air ow.
Do not pick up toxic materials (chlorine
bleach, ammonia, drain cleaner, etc.).
Do not pick up anything that is burning
or smoke, such as cigarettes, matches, or
hot ashes.
Do not use to pick up ammable or
combustible liquids such as gasoline or
use in areas where they may be present.
Also do not use in:
Locations with candles or desk lamps
on the oor.
Locations with unattended res (re or
embers).
Locations with distilled alcohol,
thinner, ashtrays with burning
cigarettes, etc.
Do not use POWERbot in an enclosed
space lled with vapours given off by oil
based paint, paint thinner, moth proong
substances, ammable dust, or other
explosive or toxic vapours.
Leaks from battery cells can occur
under extreme usage or temperature
conditions. If the liquid gets on
skin, wash quickly with water. If the
liquid gets into the eyes, ush them
immediately with clean water for a
minimum of 10minutes. Seek medical
attention.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 4 2020-01-13 오후 9:56:42
English-5
Safety information
2-3
WARNING
Power related
Please prevent any risk of electric shock
or re.
Do not damage the power cord.
Do not pull the power cord too hard or
touch the power plug with wet hands.
Do not use a power source other than
100-240V~ and also do not use a
multi outlet to supply power to number
of devices at the same time. (Do not
leave the cord carelessly on the oor.)
Do not use a damaged power plug,
power cord or loose power outlet.
Clean dust or any foreign matters on the
pin and contact part of the power plug.
There is a risk of electric shock or
malfunction.
Before use
Do not use POWERbot near a heater or
combustible materials.
Do not use powerbot near re or
ame such as a movable heater, a
candlelight, a desk lamp, a replace
etc. or in a place where combustible
materials such as gasoline, alcohol,
thinner etc. exist.
Make sure there are no dangerous
objects around the POWERbot’s cleaning
area to prevent collision and unplug any
electric heaters or fans.
The POWERbot is intended for household
use therefore do not use it in an attic,
basement, storage, industrial building,
out of indoor space, places with moisture
(such as bathroom, laundry), on the table
or shelves.
The POWERbot can be damaged or
malfunction.
Be sure POWERbot does not pass
through or touch any kind of liquids.
The POWERbot can be severely
damaged and it may contaminate other
areas if the wheels pass through liquid.
Do not spill any liquids on the docking
station.
There is a risk of re or electric shock.
Do not use the battery charger / docking
station for anything other than its
intended purpose.
There is a risk of re or severe damage
to the docking station.
Always keep the cliff sensor clean for
your safety.
In use
If any abnormal sounds, smells or smoke
come from POWERbot, immediately shut
off the emergency switch at the bottom
of POWERbot and contact a service
center.
Cleaning and maintenance
When power cord is damaged, contact
a service center to get it replaced by
certied repairman.
There is a risk of re or electric shock.
Please check with a Samsung Electronics
service center when exchanging
batteries.
Using batteries from other products
can cause malfunction.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 5 2020-01-13 오후 9:56:42
English-6
Safety information
2-4
CAUTION
Before use
Insert the dustbin before using
POWERbot.
Be careful with the followings for proper
automatic recharging.
Always turn on the power of the
docking station.
Install the docking station where
POWERbot can easily nd.
Do not leave any object in front of the
docking station.
When installing the docking station, do
not leave the cord carelessly on the oor
since POWERbot may get tangled by it.
Do not use POWERbot on black colored
oors.
The POWERbot may not be able to
operate normally.
Do not place any objects within 0.5m
to both sides and 1m to the front of the
docking station.
Make sure the docking station's charging
contact is not damaged or have any
foreign matters on it.
Do not install the docking station in an
area with a dark oor.
If the oor around the docking station
is dark, recharging is hindered.
Move any obstacles that may disturb
POWERbot's movement (such as
children's indoor swing or slides) before
cleaning.
Do not use the POWERbot in a place
which is narrower than the turning
radius (0.5 m or less) of the POWERbot.
If a brush or brush cover is not
assembled correctly, scratches may occur
on the oor, or product malfunction may
occur.
Before operating the POWERbot, remove
the objects which could break such as
a frame, mirror, and porcelain items
so that the POWERbot works without
interruption.
In use
Using POWERbot on thick carpet may
damage both POWERbot and the carpet.
The POWERbot cannot pass over carpet
that is thicker than 1 cm.
Do not use POWERbot on tables or other
high surfaces.
There is a risk of damage if it falls.
The POWERbot may bump into chair,
desk legs therefore move them away for
faster and efcient cleaning.
When POWERbot is operating, do not lift
it up or carry it to another area.
Do not hold by driving wheels of
POWERbot when carrying it to another
area.
Do not put any objects on top of
POWERbot and camera since it may
cause malfunction.
Remove any large papers or plastic bags
immediately when using POWERbot
since they may block the intake.
Do not aim the red pointer directly at
people or animals.
Do not lie down around the POWERBOT
that is running.
Your hair may be caught in the brush,
resulting in physical injury.
Cleaning and maintenance
Prevent any damage to POWERbot by
complying the followings.
Do not clean POWERbot by spraying
water directly onto it or use benzene,
thinner, acetone or alcohol to clean it.
Do not disassemble or repair POWERbot.
This should only be done by a certied
repairman.
Always keep the obstacle sensor and
cliff sensor clean.
If foreign matter accumulates, sensors
may malfunction.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 6 2020-01-13 오후 9:56:42
English-7
3
Charging
Please install the docking station in a place
where the oor is level and wall is straight.
How to turn on the
emergency switch
Hold the robot vacuum cleaner and
turn on the emergency switch without
pressing any buttons.
Check the charging status.
For SR1*M701*** Series,
The battery indicator blinks at 1
sec. intervals during charging and
the indicator will remain in ON
status when fully charged.
For SR1*M702***/ SR1*M703***/
SR2*M70**** Series, " " will
turn on according to charging
progress and "FULL" will turn on
when charging is complete.
When the product is purchased, the battery is not charged, so charging must initially be done
manually.
0.5 m
1 m
0.5 m
Make sure the
charge pins on the
robot vacuum cleaner
and the charger are
aligned.
Ensure the power
cord is arranged
neatly next to the
wall.
Ú Install with the grain of wood
oors.
Install the charger where the
robot vacuum cleaner can
easily nd it.
<SR1*M702*** / SR1*M703*** /
SR2*M70**** Series>
<SR1*M701*** Series>
1_VR7000_Q_guide_EN_00763K-13_SW.indd 7 2020-01-13 오후 9:56:44
English-8
4-1
Using the robot vacuum cleaner
Starting Auto clean mode
The POWERbot moves and
automatically cleans the set
areas only once.
SR1*M701*** series : cleans
repeatedly until the battery is
depleted.
Stop cleaning:
Press and release the button
Starting Spot clean mode
Press and release this button.
The POWERbot cleans a
localized area intensely.
Recharging
You can command POWERbot
to recharge at the docking
station automatically while it is
cleaning by pressing this button.
Auto Clean Spot Clean Repeat clean
Manual Clean
Manual clean mode
can be selected by the
direction control buttons
of the remote controller.
Press the [A,B type
],
[C,D type ] on the
remote controller rst
and then press the [Start/
Stop
].
<SR1*M701*** series> <SR1*M702*** / SR1*M703*** series>
<SR1*M702*** /
SR1*M703*** /
SR2*M70**** series>
<SR1*M701*** series>
<SR1*M702*** /
SR1*M703*** /
SR2*M70**** series>
<SR1*M701*** series>
<SR1*M702*** /
SR1*M703*** /
SR2*M70**** series>
<SR1*M702*** /
SR1*M703*** /
SR2*M70**** series>
<SR2*M70**** series>
1_VR7000_Q_guide_EN_00763K-13_SW.indd 8 2020-01-13 오후 9:56:48
English-9
1. Power
Turn POWERbot's power on/off
2. Recharging
Select to recharge POWERbot at the docking station
automatically
3. Start/Stop
Select to start or stop cleaning process
4. Auto clean
Select to clean all set areas only once and then
automatically return to the docking station.
5. Spot clean
Select to clean a localized area intensely
6. Repeat clean
Select to clean repeatedly until the battery becomes
very low with indicator blinking
7. Turbo mode
Select to clean with the strongest suction power
8. Normal mode
Select to clean with moderate suction power
9. Quiet mode
Select to clean with lower operation noise
10. Sound
Each time you press this button, Sound Effects Mute
is selected in this sequence
<SR10M703**9 series only>
Star wars Sound Effects Mute
11. Schedule / Cancel(3sec)
Refer to page 10
12. Clock
Refer to page 10
13. Remote control
Select to turn Wi-Fi function on or off
SR10M701**5 series only : Star wars(Mute function
is not available.)
Using the robot vacuum cleaner
4-2
[A Type] [B Type] [C Type] [D Type]
2 2 2 2
5
11
6
8
12
10
7
6
8
12
10
7
13
5
11
5
9
11
6
8
12
10
7
6
8
12
10
7
13
5
9
11
3 3
3 3
4 4
4 4
1 1 1 1
1_VR7000_Q_guide_EN_00763K-13_SW.indd 9 2020-01-13 오후 9:56:49
English-10
Setting time/schedule
Only Auto clean mode can be scheduled.
5-1
Setting the time
You must set the current time before using the One-time/daily schedule.
Setting complete
Start setting Select "Hour" Select "Minute"
Select "AM/PM"
Skip to previous,
next setting
Setting the schedule
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Start setting
Setting complete Select "AM/PM" Select "Minute"
Select "One-time" or
"Daily" schedule
Select "Hour"
Skip to previous, next setting
[A Type, B Type]
[A Type, B Type]
Setting complete
Start setting Select "Hour" Select "Minute"
Select "AM/PM"
Skip to previous,
next setting
[C Type, D Type]
1_VR7000_Q_guide_EN_00763K-13_SW.indd 10 2020-01-13 오후 9:56:50
English-11
Setting time/schedule
Only Auto clean mode can be scheduled.
5-2
Cancelling during setup
Setting will be canceled automatically when there's no input for
7seconds
Cancelling One-time/Daily schedule
When both One-time/
Daily schedule are set
or or
or
or
Press for 3 sec. Select the schedule Cancel complete
When either One-time
or Daily schedule is
set
or
Press for 3 sec.
Start setting
Setting complete Select "AM/PM" Select "Minute"
Select "One-time" or
"Daily" schedule
Select "Hour"
Skip to previous, next setting
[C Type, D Type]
[SR10M701*** series]
For the models which do not include a remote controller, schedule setting is available as below.
Setting/cancelling the schedule can only be done while POWERbot is docked on the docking station.
Press for 3 sec.
When the schedule LED is turned on,
Daily schedule is set.
Cancelling daily schedule
When a daily schedule
is set
Press for 3 sec.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 11 2020-01-13 오후 9:56:54
English-12
Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
6-1
Dustbin
1
Press the button to
remove the dustbin
2
Remove the dustbin
cover
3
Remove dust in the
dustbin and cyclone
unit
'Click'
4
Detach the cyclone unit
from the dustbin cover,
and then wash the
dustbin and the lter
5
Reassemble the
dustbin
6
Reinsert the dustbin
into the main body
until it clicks
1_VR7000_Q_guide_EN_00763K-13_SW.indd 12 2020-01-13 오후 9:56:58
English-13
Cleaning and maintaining
You must turn off the emergency switch before cleaning POWERbot.
6-2
Brush and Auto shutter tool
Brush design may differ depending on the model. Do not clean the brush with water.
1
Remove the
brush cover
2
Remove the
brush
3
Clean the brush
4
Clean the auto
shutter tool
5
Reassemble the brush
6
Reassemble the brush cover
If a brush or brush cover is not assembled correctly after the maintenance work, scratches may occur
on the oor, or product malfunction may occur. Therefore, assemble them correctly by referring to the
cleaning and maintaining section of a user manual.
Information codes
[SR1*M701*** series]
Refer to the user manual for steps to take for each information code on the display panel.
Information codes
Information codes animation
[SR1*M702***, SR1*M703***, SR2*M70**** series]
Refer to the user manual for steps to take for each Information code with mark on the display panel.
1_VR7000_Q_guide_EN_00763K-13_SW.indd 13 2020-01-13 오후 9:57:03
English-14
Downloading the SmartThings App
f Download and install the SmartThings app from the markets (Google Play Store, Apple App Store,
or Samsung Galaxy Apps). To nd the app, use the keyword “SmartThings”.
NOTE
f SmartThings is incompatible with tablets and some mobile devices.
Android 6.0 or later (at least 2GB of RAM) is recommended.
f iPad and some mobile devices may not be supported.
iOS 10.0 or later / iPhone 6 or later is supported.
f Visit Play Store or App Store to see if your mobile device is compatible with SmartThings.
f The supported features are subject to change without any prior notice.
Setting up a Samsung account
f You must sign in to a Samsung account before using the SmartThings app.
f To set up a Samsung account, you can follow the directions provided by the SmartThings app.
f Or, if you have a Samsung smartphone, you can add your Samsung account in the setting app of
your smartphone. Then, it will automatically sign in to your Samsung account.
NOTE
f If you cannot complete the product registration, please take the following steps.
Try the registration procedure again as you have directed by the pop-up messages.
Conrm that the UPnP option of your wireless router is active, and then try the registration procedure
again.
Conrm that your wireless router is operating in wireless mode, and then try the registration procedure
again.
If you have two or more POWERbots, turn off the other POWERbots, and then try to register your
POWERbot again.
If there is any other wireless router that has the same SSID as your wireless router, the registration might
be failed.
f Remote control and Wi-Fi indicator
On
Remote control is blocked. (The remote controller can still be
allowed.)
Off Remote control is allowed.
On The POWERbot is connected to the wireless router.
Off The POWERbot is trying to connect the wireless router.
Hereby, Samsung Electronics, declares that the radio equipment type appliance is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
The ofcial Declaration of conformity may be found at http://www.samsung.com, go to Support > Search
Product Support and enter the model name.
Wi-Fi
Frequency range 2412 - 2472 MHz
Transmitter power(Max) 20 dBm
SmartThings App
The SmartThings App is only compatible with models that have a Wi-
Fi function.
7
1_VR7000_Q_guide_EN_00763K-13_SW.indd 14 2020-01-13 오후 9:57:05
English-15
Memo
1_VR7000_Q_guide_EN_00763K-13_SW.indd 15 2020-01-13 오후 9:57:05
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Country Customer Care Center Web Site
SWITZERLAND 0800 726 78 64 (0800-SAMSUNG)
www.samsung.com/ch/support (German)
www.samsung.com/ch_fr/support (French)
AUSTRIA 0800 72 67 864 (0800-SAMSUNG) www.samsung.com/at/support
1_VR7000_Q_guide_EN_00763K-13_SW.indd 16 2020-01-13 오후 9:57:06
POWERbot
Kurzanleitung
Serie SR1*M70****, SR2*M70****
Lesen Sie die Anweisungen sorgfältig durch, ehe Sie das Gerät in Betrieb nehmen.
Nur zum Einsatz in geschlossenen Räumen geeignet.
2_VR7000_Q_guide_DE_00763K-13_SW.indd 1 2020-01-14 오후 3:21:43
Deutsch-2
Teileliste
1
Saugschlitten
Basisteile
Fernbedienung
Dockingstation
Batterien
(Typ AAA) (optional
erhältlich)
Kurzanleitung Ersatzlter (optional
erhältlich)
Die Saugaufsätze
können sich je
nach Modell
unterscheiden.
Netzkabel Batterieladegerät Virtual Guard (optional
erhältlich)
[Typ A] [Typ B] [Typ C] [Typ D]
(Nicht im Lieferumfang der
Serie SR1*M701*** enthalten)
2_VR7000_Q_guide_DE_00763K-13_SW.indd 2 2020-01-14 오후 3:21:44
Deutsch-3
Sicherheitsinformationen
2-1
Lesen Sie vor der Verwendung des Geräts
das Benutzerhandbuch sorgfältig durch,
und bewahren Sie sie zum späteren
Nachschlagen auf.
Da die folgenden Hinweise zum Betrieb für
verschiedene Modelle gelten, können die
Eigenschaften Ihres Geräts leicht von den in
dieser Bedienungsanleitung beschriebenen
Merkmalen abweichen.
SYMBOLE DER GEFAHREN-/WARNHINWEISE
WARNUNG
Dieses Symbol weist darauf hin, dass
Lebensgefahr oder das Risiko ernsthafter
Verletzungen besteht.
VORSICHT
Dieses Symbol weist darauf hin, dass die Gefahr
von Personen- oder Sachschäden besteht.
WEITERE VERWENDETE SYMBOLE
HINWEIS
Dieses Symbol weist darauf hin, dass der
folgende Text wichtige Zusatzinformationen
enthält.
Weitere Informationen zum Engagement
von Samsung für die Umwelt und zu
produktspezischen Auagen wie z.
B. REACH(WEEE, Batterien) nden Sie
unter samsung.com/uk/aboutsamsung/
samsungelectronics/corporatecitizenship/
data_corner.html
Wichtige Sicherheitshinweise
Beim Umgang mit Elektrogeräten sind einige
grundlegende Vorsichtsmaßnahmen wie u. a.
die folgenden zu beachten:
LESEN SIE VOR DER VERWENDUNG IHRES
POWERbot SÄMTLICHE ANWEISUNGEN
GRÜNDLICH DURCH.
Ziehen Sie den Stecker aus der Dose, wenn
Sie das Gerät nicht verwenden und ehe Sie
Wartungsarbeiten durchführen.
WARNUNG
So verringern Sie die Gefahr von
Verletzungen, Stromschlägen oder Bränden:
ALLGEMEIN
Verwenden Sie das Gerät nur wie in diesem
Handbuch beschrieben.
Verwenden Sie weder den POWERbot
noch die Lade-/Dockingstation, wenn sie
beschädigt sind.
Wenn das Gerät nicht ordnungsgemäß
arbeitet, heruntergefallen, beschädigt oder
ins Wasser gefallen ist oder im Freien
vergessen wurde, schicken Sie es an das
nächstgelegene Kundendienstzentrum.
Berühren Sie die Lade-/Dockingstation und
den POWERbot nicht mit nassen Händen.
Verwenden Sie ihn nur für trockene Flächen
in geschlossenen Räumen.
Dieses Gerät darf von Kindern ab
8Jahren und Personen mit verminderten
körperlichen, sensorischen oder geistigen
Fähigkeiten oder einem Mangel an
Erfahrung und Wissen nur bedient werden,
wenn sie unter Aufsicht stehen oder eine
Unterweisung zum sicheren Umgang mit
dem Gerät erhalten haben und die damit
verbundenen Gefahren verstehen. Kinder
dürfen nicht mit dem Gerät spielen. Kinder
dürfen bei Reinigung und Wartung nur dann
helfen, wenn sie dabei beaufsichtigt werden.
2_VR7000_Q_guide_DE_00763K-13_SW.indd 3 2020-01-14 오후 3:21:45
Deutsch-4
Sicherheitsinformationen
2-2
Lade-/Dockingstation
Modizieren Sie den gepolten Stecker nicht,
um ihn an eine ungepolte Steckdose oder ein
ungepoltes Verlängerungskabel anschließen
zu können.
Verwenden Sie das Gerät nicht im Freien oder
auf nassen Flächen.
Ziehen Sie den Stecker der Lade-/
Dockingstation aus der Dose, wenn Sie
das Gerät nicht verwenden und ehe Sie
Wartungsarbeiten durchführen.
Verwenden Sie nur die vom Hersteller
mitgelieferte Lade-/Dockingstation.
Verwenden Sie niemals beschädigte oder lose
Netzkabel, Netzstecker oder Steckdosen.
Ziehen und tragen Sie das Gerät nicht am
Kabel, und verwenden Sie das Kabel nicht als
Tragegriff. Ziehen Sie das Kabel auch nicht um
scharfe Kanten oder Ecken herum. Halten Sie
das Kabel entfernt von beheizten Oberächen.
Verwenden Sie keine Verlängerungskabel
oder Steckdosen mit unzureichender Leistung.
Ziehen Sie nicht am Netzkabel, wenn Sie den
Stecker aus der Dose ziehen. Ziehen Sie den
Stecker stets am Stecker selbst und nicht am
Kabel heraus.
Beschädigen und verbrennen Sie
die Batterien nicht, da sie bei hohen
Temperaturen explodieren.
Versuchen Sie keinesfalls, die Lade-/
Dockingstation zu öffnen. Reparaturen
dürfen nur von einem qualizierten
Kundendienstzentrum durchgeführt werden.
Setzen Sie die Lade-/Dockingstation keinen
hohen Temperaturen aus, und lassen Sie weder
Feuchtigkeit noch Nässe in irgendeiner Form in
Kontakt mit der Lade-/Dockingstation kommen.
VERORDNUNG (EU) 2019/1782 DER
KOMMISSION
Ökodesign-Anforderungen an externe
Netzteile: www.samsung.com/global/
ecodesign_component
POWERbot
Saugen Sie keine harten oder scharfen
Gegenstände wie Glas, Nägel, Schrauben,
Münzen usw. auf.
Verwenden Sie das Gerät niemals ohne Filter.
Führen Sie bei der Wartung und Pege des
Geräts niemals Ihre Finger oder andere
Gegenstände in die Lüfterkammer ein, da
sich das Gerät möglicherweise ungewollt
einschalten könnte.
Stecken Sie keine Objekte in die Öffnungen
des Geräts. Verwenden Sie das Gerät nicht mit
versperrten Öffnungen. Halten Sie Öffnungen
frei von Staub, Fusseln, Haaren und anderen
Stoffen, die die Luftströmung behindern
könnten.
Saugen Sie keine toxischen Stoffe
(Chlorbleiche, Ammoniak, Abussreiniger
usw.) auf.
Saugen Sie nichts auf, was brennt oder Rauch
erzeugt (z.B. Zigaretten, Streichhölzer oder
heiße Asche).
Verwenden Sie das Gerät nicht, um leicht
entzündliche oder brennbare Flüssigkeiten
wie Benzin aufzusaugen, und setzen Sie
es nicht an Stellen ein, wo solche Stoffe
vorhanden sein könnten.
Verwenden Sie das Gerät ebenfalls nicht in
folgenden Bereichen:
Räume mit Kerzen oder Schreibtischlampen
auf dem Boden.
Räume mit unbeaufsichtigtem Feuer (Feuer
oder Glut).
Räume, in denen sich Benzin, Alkohol,
Verdünner, Aschenbecher mit brennenden
Zigaretten usw. benden.
Verwenden Sie den POWERbot nicht in
geschlossenen Räumen, wenn die Luft darin
Dämpfe von lösungsmittelhaltigen Farben,
Lackverdünnern, Mottenschutzmitteln,
brennbaren Stäuben oder andere explosive
bzw. toxische Dämpfe enthält.
Die Akkus können bei extremen Einsatz-
oder Temperaturbedingungen auslaufen.
Wenn diese Flüssigkeit auf die Haut gelangt,
waschen Sie sie schnell mit Wasser ab. Wenn
die Flüssigkeit in die Augen gelangt, spülen
Sie sie sofort und mindestens 10 Minuten
lang mit sauberem Wasser aus. Suchen Sie
medizinische Hilfe auf.
2_VR7000_Q_guide_DE_00763K-13_SW.indd 4 2020-01-14 오후 3:21:46
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Samsung SR20M7059US Manuale utente

Tipo
Manuale utente