Rotary SPMA32 Manuale del proprietario

Marca: Rotary

Modello: SPMA32

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

SPMA32

SPMA32/C

2-SÄULEN-HEBEBÜHNE

2 POST LIFT

SOLLEVATORE A 2 COLONNE

ELEVATEUR 2 COLONNES

ELEVADOR DE 2 COLUMNAS

Rev. 0 (1/01/2017)

0445-M010-0

EG-Konformitätserklärung

EC Declaration of Conformity

im Sinne der EG-Richtlinie 2006/42/EG über Maschinen (Anhang II A)

according to EC directive 2006/42/EC on machinery (Annex II A)

Name und Anschrift des Herstellers Name und Anschrift seines in der EU

Name and address of the manufacturer: niedergelassenen Bevollmächtigten

his authorised representative in EU

Rotary Lift BlitzRotary GmbH

2700 Lanier Drive Hüfinger Str.55

Madison, IN, 47250 USA 78199 Bräunlingen, Germany

Diese Erklärung bezieht sich nur auf die Maschine in dem Zustand, in dem sie in Verkehr gebracht wurde; vom

Endnutzer nachträglich angebrachte Teile und/oder nachträglich vorgenommene Eingriffe bleiben unberücksichtigt. Die

Erklärung verliert ihre Gültigkeit, wenn das Produkt ohne Zustimmung umgebaut oder verändert wird.

This declaration relates exclusively to the machinery in the state in which it was placed on the market, and excludes

components which are added and/or operations carried out subsequently by the final user. The declaration is no more

valid, if the product is modified without agreement.

Hiermit erklären wir, dass die nachstehend beschriebene Maschine

Herewith we declare, that the machinery described below

Produktbezeichnung / product denomination: 2-Säulen-Hebebühne / 2-post vehicle lift

Serien- / Typenbezeichnung / model / type: SPOA3T

Tragfähigkeit 3500 kg / capacity 3500 kg

Maschinen-/Seriennummer / machinery / serial number: .........................

Baujahr / Year of manufacture: 20…

allen einschlägigen Bestimmungen der Maschinenrichtlinie 2006/42/EG entspricht.

Die Maschine entspricht zusätzlich den Bestimmungen der Richtlinien 2004/108/EG über elektromagnetische

Verträglichkeit und 2006/95/EG über elektrische Betriebsmittel

(Schutzziele wurden gemäß Anhang I, Nr. 1.5.1 der

Maschinenrichtlinie 2006/42/EG eingehalten).

is complying with all essential requirements of the Machinery Directive2006/42/EC.

In addition the partly completed machinery is in conformity with the EC Directives 2004/108/EC relating to

electromagnetic compatibility and 2006/95/EC relating to electrical equipment

(Protection objectives have been met in

accordance with Annex I No. 1.5.1 of the Machinery Directive 2006/42/EC).

Angewandte harmonisierte Normen / Harmonised Standards used

EN 1493: 2010 Fahrzeug-Hebebühnen / Vehicle lifts

EN ISO 12100:2010 Sicherheit von Maschinen - Grundbegriffe / Safety of Machinery- Basic concepts

EN 60204-1:2006+A1:2009 Elektrische Ausrüstung von Maschinen / Electrical equipment of machines

EN 349:1993+A1:2008 Sicherheit von Maschinen-Mindestabstände / Safety of machinery - Minimum gaps

EN ISO 13850:2008 Sicherheit von Maschinen-Not-Halt / Safety of machinery – Emergency stop

Angewandte sonstige technische Normen und Spezifikationen

Other technical standards and specifications used:

BGG 945 Prüfung von Hebebühnen / inspection of vehicle lifts

BGR 500 Betreiben von Arbeitsmitteln / management of working appliances

BGV A3 Unfallverhütungsvorschrift elektrische Anlagen und Betriebsmittel / law accident prevention regulation of

electric facilities and equipment

Bevollmächtigter für die Zusammenstellung der relevanten technischen Unterlagen:

The person authorised to compile the relevant technical documentation:

Herr Pohl; Hüfinger Str. 55; 78199 Bräunlingen

Ort / Place : Bräunlingen

Datum / Date : 19.03.2013

______________________

Frank Scherer

Geschäftsführer / Managing Director

SPMA 32

3200kg 3200kg

1/03/2017

EG-Konformitätserklärung

EC Declaration of Conformity

im Sinne der EG-Richtlinie 2006/42/EG über Maschinen (Anhang II A)

according to EC directive 2006/42/EC on machinery (Annex II A)

Name und Anschrift des Herstellers Name und Anschrift seines in der EU

Name and address of the manufacturer: niedergelassenen Bevollmächtigten

his authorised representative in EU

Rotary Lift BlitzRotary GmbH

2700 Lanier Drive Hüfinger Str.55

Madison, IN, 47250 USA 78199 Bräunlingen, Germany

Diese Erklärung bezieht sich nur auf die Maschine in dem Zustand, in dem sie in Verkehr gebracht wurde; vom

Endnutzer nachträglich angebrachte Teile und/oder nachträglich vorgenommene Eingriffe bleiben unberücksichtigt. Die

Erklärung verliert ihre Gültigkeit, wenn das Produkt ohne Zustimmung umgebaut oder verändert wird.

This declaration relates exclusively to the machinery in the state in which it was placed on the market, and excludes

components which are added and/or operations carried out subsequently by the final user. The declaration is no more

valid, if the product is modified without agreement.

Hiermit erklären wir, dass die nachstehend beschriebene Maschine

Herewith we declare, that the machinery described below

Produktbezeichnung / product denomination: 2-Säulen-Hebebühne / 2-post vehicle lift

Serien- / Typenbezeichnung / model / type: SPOA3T

Tragfähigkeit 3500 kg / capacity 3500 kg

Maschinen-/Seriennummer / machinery / serial number: .........................

Baujahr / Year of manufacture: 20…

allen einschlägigen Bestimmungen der Maschinenrichtlinie 2006/42/EG entspricht.

Die Maschine entspricht zusätzlich den Bestimmungen der Richtlinien 2004/108/EG über elektromagnetische

Verträglichkeit und 2006/95/EG über elektrische Betriebsmittel

(Schutzziele wurden gemäß Anhang I, Nr. 1.5.1 der

Maschinenrichtlinie 2006/42/EG eingehalten).

is complying with all essential requirements of the Machinery Directive2006/42/EC.

In addition the partly completed machinery is in conformity with the EC Directives 2004/108/EC relating to

electromagnetic compatibility and 2006/95/EC relating to electrical equipment

(Protection objectives have been met in

accordance with Annex I No. 1.5.1 of the Machinery Directive 2006/42/EC).

Angewandte harmonisierte Normen / Harmonised Standards used

EN 1493: 2010 Fahrzeug-Hebebühnen / Vehicle lifts

EN ISO 12100:2010 Sicherheit von Maschinen - Grundbegriffe / Safety of Machinery- Basic concepts

EN 60204-1:2006+A1:2009 Elektrische Ausrüstung von Maschinen / Electrical equipment of machines

EN 349:1993+A1:2008 Sicherheit von Maschinen-Mindestabstände / Safety of machinery - Minimum gaps

EN ISO 13850:2008 Sicherheit von Maschinen-Not-Halt / Safety of machinery – Emergency stop

Angewandte sonstige technische Normen und Spezifikationen

Other technical standards and specifications used:

BGG 945 Prüfung von Hebebühnen / inspection of vehicle lifts

BGR 500 Betreiben von Arbeitsmitteln / management of working appliances

BGV A3 Unfallverhütungsvorschrift elektrische Anlagen und Betriebsmittel / law accident prevention regulation of

electric facilities and equipment

Bevollmächtigter für die Zusammenstellung der relevanten technischen Unterlagen:

The person authorised to compile the relevant technical documentation:

Herr Pohl; Hüfinger Str. 55; 78199 Bräunlingen

Ort / Place : Bräunlingen

Datum / Date : 19.03.2013

______________________

Frank Scherer

Geschäftsführer / Managing Director

SPMA 32/C

3200kg 3200kg

1/03/2017

CAUTION!

- This manual is an integral part of the product and must be kept together with the lift throughout its lifeti-

me.

- It should therefore be kept in an easily accessible and familiar place and consulted when in doubt. All

product operators must be able to read the manual. Any damage resulting from improper use of the lift and

failure to follow the instructions contained in this manual will release ROTARY from any liability.

ACHTUNG!

- Diese Anleitung ist ergänzender Bestandteil des Produktes und muss zusammen mit der Hebebühne

sorgfältig aufbewahrt werden.

- Die Anleitung in einem bekannten und leicht zugänglichen Ort aufbewahren und bei Bedarf zu Rate

ziehen. Alle Bediener des Produktes müssen zwecks Einsichtnahme Zugang zur Anleitung haben. Alle

Schäden, die auf Nichtbeachtung der Anweisungen dieser Anleitung oder auf einen unsachgemässen

Betrieb der Hebebühne zurückzuführen sind, sind nicht dem Hersteller anzulasten und befreien die Firma

ROTARY von jeglicher Haftungspﬂicht.

ATTENZIONE!

- Il presente manuale costituisce parte integrante del prodotto, dovrà seguire tutta la vita operativa del

sollevatore.

- Conservarlo, quindi, in luogo noto e facilmente accessibile e consultarlo ogni qualvolta sorgano dubbi.

Tutti gli operatori al prodotto devono poter leggere il manuale. Ogni danno derivante dalla mancata osser-

vanza delle indicazioni contenute nel presente manuale e da un uso improprio del sollevatore esime la

ROTARY da ogni responsabilità.

ATTENTION !

- La présente notice constitue partie intégrante du produit. Elle devra accompagner le pont élévateur pen-

dant tout la durée de son fonctionnement.

- La conserver dans un endroit connu et facilement accessible et la consulter à chaque fois qu’un doute se

présente. Tout dommage provoqué par le non-respect des instructions contenues dans la présente notice

ou par une utilisation incorrecte du pont élévateur décline la Société ROTARY de toute responsabilité.

¡ATENCIÓN!

- El presente manual constituye una parte integrante del producto, por lo que tendrá que seguir toda la

vida operativa del elevador.

- Conservarlo, por lo tanto, en un sitio que conozcan todos, al que se pueda acceder con facilidad y con-

sultarlo cada vez que surjan dudas. Todas las personas que utilizan el elevador tienen que poder leer el

manual. Cualquier daño que derive de la falta de respeto de las indicaciones que contiene el presente

manual, o del uso incorrecto del elevador exime de toda responsabilidad a ROTARY

PAGE INTENTIONELLY LEFT BLANK

ABSICHTLICH LEER GELASSENE SEITE

PAGINA LASCIATA INTENZIONALMENTE BIANCA

PAGE INTENTIONELLEMENT VIDE

PAGINA VACÍA INTENCIONADAMENTE

DOVER

A COMPANY

ROTARY LIFT

DRAW ING NUMB ER

SCALE

DRAWN

DATE

APPRO VED

THIRD ANGLE

PROJECTION

NOTES:

SHEET

1 of 1

SPMA32_8504

06-12-16

SPMA32

The design and detail illustrated in this drawing is the property of Rotary

Lift. It is being loaned with the expressed condition that it will not be

duplicated or used except by permission and is subject to return upon request.

REV

CO NUMDATE

DO NOT SCALE DRAWING

UNLESS OTHERWISE SPECIFIED:

0.8mm MIN. CORNER BREAK

REMOVE ALL BURRS

UNLESS OTHERWISE NOTED:

ANGULAR DIMENSIONS:

OTHER DIMENSIONS: 0.8mm (<305mm)

1.6mm (>or= 305mm)

Tragfähigkeit: max.3200kg

capacity

HSL-3 M10/20 type

HVU M12x110 type

110

min.200*

2269

Fundament min 4000

Das Netzkabel wird

von oben in die

Bediensäule geführt.

Insert the power supply

cable from above

to the operating column

Alle Maße in Millimeter

all dimensions in millimeter

Mass- und Konstruktionsänderungen vorbehalten!

subject to alterations!

Betonqualität

quality of concrete

min.C25/30

normal bewehrt

normal armouring

We point out the minimum requirement

of the foundation in our plans.

The condition of the local realities

for example: the ground under the

foundation) does not lie in our

responsibility. The execution of

the installation situation must be

individually specified by the planning

architect or by the engineer engaged in

statically calculations in the special case.

Wir weisen in unseren Plänen

auf die Mindestanforderung

des Fundamentes hin, jedoch

der Zustand der örtlichen

Gegebenheiten (z.B. Untergrund,

Ausführung etc.)

obliegt nicht unserer Verantwortung.

Die Ausbildung der Einbausituation

muss vom planenden Architekten

bzw. Statiker im speziellen Fall

individuell spezifiziert werden.

"H"

Detail "H"

Bauseits an der Bediensäule bereitstellen:

Netzanschluss: SPMA32: 3PH+PE 400V,50Hz

SPMA32/C: 3PH,N+PE 400V,50Hz

Absicherung: 25 Ampere träge

Kabellänge: SPMA32: cable >= 4 x 4mm

SPMA32/C: cable >= 5 x 4mm

optional: Druckluft, lichte Weite 6mm, 6-10 bar

Prepared by customer at the operating column:

power supply: SPMA32: 3PH+PE 400V,50Hz

SPMA32/C: 3PH,N+PE 400V,50Hz

fuse: 25 Ampere, time lag

cable: SPMA32: cable >= 4 x 4mm

SPMA32/C: cable >= 5 x 4mm

optional air pressure: inner diameter 6mm, 6-10 bar

OKFFB

Grundplatte/base plate

Bediensäule

Operating column

maximale statische Kräfte und Momente

maximum Forces and Moments

empfohlene Dübel / recommended anchors

*) Betonstärke min.200mm

ohne Belag (Fliesen/Estrich)

Concrete thickness

min.200mm without

floor pavement/tiles

Die Mindestverankerungstiefe des Dübels beachten.

Mit Estrich/Fliesen sind längere Dübel einzusetzen.

Observe the min. anchorage of the dowels. With floor

pavements use longer dowels.

Die Montagevorschrift des Dübelherstellers beachten.

Observe the regulation of the dowel manufacturer

P: 19 KN / Mx: 16 K Nm / My: 15 K Nm

Anschlussarmierung zum

vorhandenen Betonboden

herstellen

Produce a connection reinforcement

to the existing concrete floor

optional:

Verlängerungen

extension kit

2510

3901

2042 max

92-152

2644

550-1100

2637

2389

2664

Fundament min 1500

3132

926-1440

Einfahrrichtung

Drive in direction

160

100

220

410

520

350

170

180

ø18

92-152

max.3943

IN DER BEDIENUGSANLEITUNG VERWENDETE ZEICHEN

SYMBOLS USED IN THE MANUAL

SIMBOLOGIA UTILIZZATA NEL MANUALE

SYMBOLES UTILISÉS DANS LA NOTICE

SIMBOLOGíA UTILIZADA EN EL MANUAL

SIMBOLISYMBOLSZEICHEN

SYMBOLES SÍMBOLOS

Sollevamento

dall’alto

Lifting from aboveAnheben von oben Levage par le haut

Elevación desde

arriba

Movimentazione

con carrello

elevatore o

transpallets

Moving with fork lift

truck or transpallets

Transport mit

Gabelstapler oder

Handgabelhubwagen

Déplacement avec

chariot élévateur ou

transpalettes

Desplazamiento con

carretilla elevadora

o transpaletas

Indossare guanti da

lavoro

Wear work gloves

Der Arbeit

angemessene

Handschuhe tragen

Porter des gants de

travail

Llevar guantes de

trabajo

Calzare scarpe da

lavoro

Wear work shoes

Der Arbeit

angemessene

Schuhe tragen

Mettre des

chaussures de

travail

Usar zapatos de

trabajo

Non passare nè

sostare sotto carichi

sospesi

Do not walk or stay

beneath suspended

loads

Sich nicht unter

aufgehobener Last

aufhalten oder

durchgehen

Ne pas passer et ne

pas s’arrêter

au-dessous des

charges

suspendues

No pasar ni

permanecer por

debajo de cargas

suspendidas

Personale

specializzato

Specialist staff

Qualiﬁziertes

Fachpersonal

Personnel qualiﬁé

Personal

especializado

Pericolo di scariche

elettriche

Shock hazard

Gefahr: elektrische

Entladungen

Danger

d'électrocution

Peligro de

descargas

eléctricas

Attenzione!Caution!Achtung! Attention! iAtención

Organi meccanici in

movimento.

Working mechanical

parts

Mechanische

Elemente in

Bewegung

Organes

mécaniques en

mouvement

Órganos mecánicos

en movimiento

SchiacciamentoCrushingQuetschgefahr

Risques

d’écrasement

Aplastamiento

ObbligoObligationPﬂicht Obligation Obligación

INDICE

CONTENTS

INHALTSVERZEICHNIS

0. NORME GENERALI DI SICUREZZA

1. DISPOSITIVI DI SICUREZZA

1.1 INTERRUTTORE GENERALE

LUCCHETTATO

1.2 SISTEMA A UOMO PRESENTE

1.3 BLOCCO MECCANICO D'EMERGENZA

1.4 RIALLINAMENTO CARRELLI

1.5 BLOCCO DI EMERGENZA

1.6 MANOVRE PERMESSE IN CONDIZIONI

DI EMERGENZA

1.7 ARRESTO USURA CHIOCCIOLE

1.8 RISCHI RESIDUI

1.9 PITTOGRAMMI PRESENTI SUL

SOLLEVATORE

2. DESTINAZIONE D’USO

3. DATI TECNICI

3.1 MOVIMENTAZIONE E

PREINSTALLAZIONE

4. DESCRIZIONE DEL SOLLEVATORE

4.1 CARATTERISTICHE TECNICHE

PRINCIPALI

4.2 COMANDI DEL SOLLEVATORE

4.3 ATTITUDINE ALL'IMPIEGO

5. VERIFICA DEI REQUISITI MINIMI

RICHIESTI PER LUOGO DI

INSTALLAZIONE

6 INSTALLAZIONE

6.1 REQUISITI PER L'INSTALLAZIONE

6.2 ISTRUZIONI PER L'INSTALLAZIONE

6.3 CONTROLLO TENSIONE

6.4 ALLACCIAMENTO RETE

6.5 COLLEGAMENTI

6.6 MONTAGGIO DEL CAVO DI RIALLINEO

6.7 COMPLETAMENTO E CONTROLLO

6.8 SMONTAGGIO

7. ISTRUZIONI PER L’USO DEL

SOLLEVATORE

7.1 USO IMPROPRIO DEL SOLLEVATORE

7.2 USO DI ACCESSORI

7.3 ADDESTRAMENTO DEL PERSONALE

PREPOSTO

7.4 PRECAUZIONI D’USO

7.5 IDENTIFICAZIONE DEI COMANDI E

LORO FUNZIONE

8. INCONVENIENTI

9. MANUTENZIONE

9.1 GUIDE DI SCORRIMENTO

9.2 VASCHETTE DI LUBRIFICAZIONE

9.3 CHIOCCIOLE PORTANTI

9.4 CUSCINETTI

10. ACCANTONAMENTO

10.1 ROTTAMAZIONE

11. IMPIANTO ELETTRICO

12. RAPPORTO DI INSTALLAZIONE -

VISITA PERIODICA - MANUTENZIONI

STRAORDINARIE E RIPARAZIONI

13. DATI DI IDENTIFICAZIONE DELLA

MACCHINA

14 CERTIFICATO

0. GENERAL SAFETY PRECAUTIONS

1. SAFETY DEVICES

1.1 PADLOCKABLE MAIN SWITCH

1.2 DEADMAN DEVICE SYSTEM

1.3 MECHANICAL EMERGENCY STOP

1.4 CARRIAGE HEIGHT

SYNCHRONIZATION

1.5 EMERGENCY BLOCK

1.6 MANOEUVRES PERMITTED IN

EMERGENCY CONDITIONS

1.7 NUT WEAR STOP

1.8 INDICATION OF OUTSTANDING RISKS

1.9 PICTOGRAMS ON LIFT

2. INTENDED USE

3. TECHNICAL DETAILS

3.1 PRE-INSTALLATION AND MOVEMENT

4. DESCRIPTION OF LIFT

4.1 MAIN TECHNICAL SPECIFICATIONS

4.2 LIFT CONTROLS

4.3 SUITABILITY FOR USE

5. CHECKING THE MINIMUM

REQUIREMENTS FOR THE PLACE OF

INSTALLATION

6 INSTALLATION

6.1 INSTALLATION REQUIREMENTS

6.2 INSTALLATION INSTRUCTIONS

6.3 VOLTAGE CHECK

6.4 CONNECTING UP TO THE MAINS

6.5 CONNECTIONS

6.6 FITTING THE REALIGNMENT CABLE

6.7 COMPLETION AND CHECK

6.8 DISMANTLING

7. INSTRUCTIONS FOR USING THE LIFT

7.1 IMPROPER USE OF THE LIFT

7.2 USE OF ACCESSORIES

7.3 STAFF TRAINING

7.4 IMPORTANT CHECKS TO BE MADE

7.5 DESCRIPTION AND FUNCTION OF

CONTROLS

8. TROUBLESHOOTING

9. MAINTENANCE

9.1 SLIDEWAYS

9.2 LUBRICATION TANKS

9.3 MAIN NUTS

9.4 BEARINGS

10. STORAGE

10.1 SCRAPPING

11. ELECTRICAL INSTALLATION

12. INSTALLATION REPORT -

PERIODICAL VISIT - UNSCHEDULED

MAINTENANCE AND REPAIRING

13. MACHINE IDENTIFICATION DATA

14 CERTIFICATE

0. ALLGEMEINE

SICHERHEITSVORSCHRIFTEN

1. SICHERHEITSEINRICHTUNGEN

1.1 VERRIEGELBARER HAUPTSCHALTER

1.2 TOTMANN-SYSTEM

1.3 MECHANISCHE NOT-AUS-

VORRICHTUNG

1.4 GLEICHLAUFREGELUNG DER

HUBWAGEN

1.5 NOT-AUS

1.6 BEI NOT-AUS ZUGELASSENE

MANÖVER

1.7 STOPP BEI

TRAGMUTTERABNUTZUNG

1.8 HINWEISE ZU DEN RESTRISIKEN

1.9 AUF DER HEBEBÜHNE VORHANDENE

GEFAHRENZEICHEN

2. BESTIMMUNGSGEMÄSSE

VERWENDUNG

3. TECHNISCHE DATEN

3.1 TRANSPORT UND

VORINSTALLATION

4. BESCHREIBUNG DER HEBEBÜHNE

4.1 TECHNISCHE HAUPTEIGENSCHAFTEN

4.2 STEUERUNGEN DER HEBEBÜHNE

4.3 BETRIEBSTÜCHTIGKEIT

5. KONTROLLE DER

MINDESTERFORDERNISSEN FÜR DEN

AUFSTELLUNGSORT

6 AUFSTELLUNG

6.1 INSTALLATIONSANFORDERUNGEN

6.2 INSTALLATIONSANWEISUNGEN

6.3 KONTROLLE DER SPANNUNG

6.4 NETZANSCHLUSS

6.5 ANSCHLÜSSE

6.6 MONTAGE DES

AUSRICHTUNGSDRAHTSEILS

6.7 KOMPLETTIERUNG UND KONTROLLE

6.8 DEMONTAGE

7. ANWEISUNGEN FÜR DIE BEDIENUNG

DER HEBEBÜHNE

7.1 UNSACHGEMÄSSE BEDIENUNG DER

HEBEBÜHNE

7.2 GEBRAUCH VON ZUBEHÖRTEILEN

7.3 SCHULUNG DES

BEDIENUNGSPERSONALS

7.4 VORSICHTSMASSNAHMEN

7.5 DIE STEUERUNGEN UND IHRE

FUNKTIONEN

8. BETRIEBSSTÖRUNGEN

9. WARTUNG

9.1 GLEITBAHNEN

9.2 SCHMIERBEHÄLTER

9.3 TRAGMUTTER

9.4 LAGER

10. EINLAGERUNG

10.1 VERSCHROTTUNG

11. ELEKTROANLAGE

12. INSTALLATIONSBERICHT -

PERIODISCHER KUNDENBESUCH -

AUSSERORDENTLICHE WARTUNGEN

UND REPARATUREN

13. KENNZEICHNUNGSDATEN DER

MASCHINE

14 ZERTIFIKAT

INDEX

ÍNDICE

0. NORMES GENERALES DE SECURITE

1. DISPOSITIFS DE SECURITE

1.1 INTERRUPTEUR PRINCIPAL

VERROUILLABLE

1.2 SYSTÈME DE SÉCURITÉ “HOMME

MORT”

1.3 ARRÊT MÉCANIQUE D’URGENCE

1.4 SYNCHRONISME DE LEVAGE

1.5 ARRÊT D’URGENCE

1.6 QUOI FAIRE EN CAS D’ARRÊT DE

SECOURS

1.7 ARRÊT USURE ECROUS

1.8 RISQUES RÉSIDUELS

1.9 PICTOGRAMMES PRÉSENTS SUR

L’ÉLÉVATEUR

2. DESTINATION D’USAGE

3. CARACTERISTIQUES TECHNIQUES

3.1 DÉPLACEMENT ET PRÉ-INSTALLATION

4. DESCRIPTION DU PONT ELEVATEUR

4.1 PRINCIPALES CARACTÉRISTIQUES

TECHNIQUES

4.2 COMMANDES DU PONT ÉLÉVATEUR

4.3 DISPOSITION POUR L'UTILISATION

5. VERIFICATION DES CARACTERISTIQUES

MINIMES REQUISES POUR LA ZONE

D’INSTALLATION

6 INSTALLATION

6.1 CONDITIONS REQUISES POUR

L’INSTALLATION

6.2 INSTRUCTIONS POUR L’INSTALLATION

6.3 CONTRÔLE DE LA TENSION

6.4 CONNEXION AU RÉSEAU

6.5 CONNEXIONS

6.6 MONTAGE DU CÂBLE DE

RÉALIGNEMENT

6.7 COMPLÈTEMENT DE L’INSTALLATION ET

CONTRÔLE

6.8 DÉMONTAGE

7. MODE D’EMPLOI DU PONT ELEVATEUR

7.1 UTILISATION INCORRECTE DU PONT

ÉLÉVATEUR

7.2 UTILISATION D’ACCESSOIRES

7.3 FORMATION DU PERSONNEL PRÉPOSÉ

7.4 PRÉCAUTIONS POUR L’EMPLOI

7.5 IDENTIFICATION ET FONCTION DES

COMMANDES

8. PANNES EVENTUELLES

9. ENTRETIEN

9.1 GLISSIÈRES

9.2 BACS DE GRAISSAGE

9.3 ECROUS PORTEURS

9.4 COUSSINETS

10. STOCKAGE

10.1 MISE À LA FERRAILLE

11. INSTALLATION ELECTRIQUE

12. RAPPORT D’INSTALLATION -

CONTROLE PERIODIQUE -

INTERVENTIONS D’ENTRETIEN

SPECIAL ET REPARATIONS

13. DONNÉES D’IDENTIFICATION DE LA

MACHINE

14 CERTIFICAT

0. NORMAS DE SEGURIDAD

1. DISPOSITIVOS DE SEGURIDAD

1.1 INTERRUPTOR GENERAL BAJO

CANDADO

1.2 SISTEMA “HOMBRE MUERTO”

1.3 BLOQUEO MECÁNICO DE EMERGENCIA

1.4 REAJUSTE DE LOS CARROS

1.5 BLOQUEO DE EMERGENCIA

1.6 MANIOBRAS PERMITIDAS EN

CONDICIONES DE EMERGENCIA

1.7 BLOQUEO DESGASTE TUERCAS

PORTANTES

1.8 RIESGOS RESIDUOS.

1.9 PICTOGRAMAS EN EL ELEVADOR

2. DESTINACIÓN DE USO

2.1 DATOS DE IDENTIFICACION DE LA

MAQUINA

3. DATOS TÉCNICOS

3.1 DESPLAZAMIENTO Y PREINSTALACIÓN

4. DESCRIPCIÓN DEL ELEVADOR

4.1 CARACTERISTICAS TÉCNICAS

PRINCIPALES

4.2 MANDOS DEL ELEVADOR

4.3 APTITUD PARA EL EMPLEO

5. COMPROBACIÓN DE LA EXISTENCIA DE

LOS REQUISITOS MÍNIMOS REQUERIDOS

PARA EL SITIO DE LA INSTALACIÓN

6 INSTALACIÓN

6.1 REQUISITOS PARA LA INSTALACIÓN

6.2 INSTR3ACIÓN DEL SISTEMA ELÉCTRICO

6.3 CONTROL DE TENSIÓN

6.4 ENLACE A LA RED

6.5 CONEXIONES

6.6 MONTAJE DEL CABLE DE REALINEACIÓN

6.7 TERMINACIÓN DE LA INSTALACIÓN Y

CONTROL

6.8 DESMONTAJE

7. INSTRUCCIONES PARA EL USO DEL

ELEVADOR

7.1 USO IMPROPIO DEL ELEVADOR

7.2 USO DE ACCESORIOS

7.3 FORMACIÓN DEL PERSONAL

AUTORIZADO

7.4 PRECAUCIONES DURANTE EL USO

7.5 IDENTIFICACIÓN DE LOS MANDOS Y SUS

FUNCIONES

8. INCONVENIENTES

9. MANTENIMIENTO

9.1 GUÍAS DESLIZANTES

9.2 TANQUES DE LUBRICACIÓN

9.3 TORNILLOS PATRÓN PORTANTES

9.4 COJINETES

10. DESUSO

10.1 REDUCCIÓN A RESIDUOS

11. INSTALACIÓN ELÉCTRICA

12. RELACIÓN DE INSTALACIÓN -

CONTROL PERIÓDICO -

MANTENIMIENTO EXTRAORDINARIO Y

REPARACIONES

13. DATOS DE IDENTIFICACION DE LA

MAQUINA

14 CERTIFICADO

ZUSAMMENSETZUNG DER

ANLEITUNG

64 Seiten

(inkl. Deckblätter)

COMPOSITION OF MANUAL

64 pages

(including cover pages)

COMPOSIZIONE DEL

MANUALE

64 pagine

(comprese le copertine)

COMPOSITION DE LA

NOTICE

64 pages

(pages de la couverture

inclues

COMPOSICIÓN DEL

MANUALE

64 páginas

(incluidas las cubiertas)

0. GENERAL SAFETY PRECAUTIONS

The lift should only be used by properly trained personnel and only after

reading and understanding this manual. The operator must be authorised

by the person in charge of the plant.

Tampering with or making changes to the lift and safety devices is forbid-

den. Failure to comply will result in the manufacturer being released from

all liability for any resulting damages.

Also follow these instructions:

- only use ROTARY accessories and spares;

- installation must be performed by authorised and professional person-

nel;

- make sure no hazardous situations occur during up or down movement

of the lift. If they do, stop the lift immediately and remedy the causes of the

emergency;

- the arms must be positioned at the vehicle points provided. Before

lifting, check vehicle stability. During up or down movement, check the

vehicle load bearing point;

- standing on the lifting mechanisms is forbidden;

- after lifting, position the switch on “0”;

- before lifting, check the load is correct by means of the “load diagram”

adhesive.

0. NORMES GENERALES DE SECURITÈ

Le pont élévateur ne peut être utilisé que par un personnel ayant suivi une

formation appropriée et ayant lu et compris le contenu de la présente

notice; l’opérateur doit être autorisé par la personne responsable de l’in-

stallation.

Il est strictement interdit de manipuler ou de modiﬁer l’élévateur et les

dispositifs de sécurité; toute dérogation à ces instructions décline le fabri-

cant de toute responsabilité.

Respecter entre autres les instructions suivantes:

- n’utiliser que des accessoires et des pièces de rechange ROTARY;

- l’installation doit être prise en charge par un personnel autorisé et quali-

ﬁé;

- contrôler l’absence de toute condition de danger pendant les mano-

euvres de montée et de descente; en cas de danger, arrêter immédiate-

ment l’élévateur et éliminer les causes à l’origine de la condition d’urgen-

ce;

- les bras doivent être positionnés aux points prévus par le fabricant du

véhicule: vériﬁer la stabilité du véhicule avant d’entreprendre la mano-

euvre de levage; pendant les phases de montée et de descente, vériﬁer le

point d’appui du véhicule;

- Il est strictement interdit de monter ou de s’arrêter sur les organes de

levage;

- une fois le levage terminé, positionner l’interrupteur sur le “0”;

- avant d’effectuer le levage, contrôler à l'aide du “diagramme de char-

gement” que le chargement soit correct.

0. NORMAS GENERALES DE SEGURIDAD

El uso del elevador sólo está permitido a personal capacitado a propósito

y sólo después de haber leído y comprendido el presente manual; el ope-

rador tiene que estar autorizado por quien desempeña el cargo de respon-

sable de la instalación.

Están prohibidas las alteraciones o modiﬁcaciones del elevador y de los

dispositivos de seguridad; en caso de que se veriﬁque lo descrito ante-

riormente, se considera al constructor no responsable de los daños deri-

vados.

Además, hay que seguir las siguientes indicaciones:

- usar únicamente accesorios y repuestos ROTARY;

- la instalación tiene que ser realizada única y exclusivamente por perso-

nal autorizado y cualiﬁcado.

- controlar que durante la fase de subida y bajada no se veriﬁquen condi-

ciones de peligro: de ser así, detener la máquina y eliminar las causas de

emergencia;

- los brazos tienen que estar colocados en los puntos predispuestos en el

vehículo; antes de la subida, comprobar la estabilidad del vehículo, com-

probar durante la fase de subida y bajada el punto de apoyo del vehículo;

- Está terminantemente prohibido subirse o pararse en los órganos de

elevación.

- después de la elevación colocar el interruptor en “O”

- antes de la elevación, comprobar con el adhesivo “diagrama de carga”

que la carga esté correcta.

0. ALLGEMEINE SICHERHEITSVORSCHRIFTEN

Die Hebebühne darf ausschliesslich von geschultem Fachpersonal

bedient werden und erst nachdem die Bedienungsanleitung aufmerksam

gelesen und verstanden worden ist. Der Bediener muss zur Bedienung

der Hebebühne von der Person autorisiert werden, die die Verantwortung

für die Anlage trägt.

Unbefugtes Betätigen und Änderungen an der Hebebühne sowie an den

Sicherheitseinrichtungen sind verboten. Bei Verstoss gegen diese Vor-

schriften lehnt der Hersteller jede Verantwortung für die daraus ent-

stehenden Schäden ab.

Darüber hinaus sind folgende Verhaltensmassregeln einzuhalten:

- nur ROTARY Zubehöre und Ersatzteile verwenden;

- die Hebebühne ist durch autorisiertes Fachpersonal aufzustellen;

- sicherstellen, dass beim Hoch- und Herunterfahren der Hebebühne

keine gefährliche Situationen entstehen; ggf. die Hebebühne sofort

anhalten und die Gefährdungen beseitigen;

- die Arme sind auf die Punkte zu positionieren, die auf dem Fahrzeug

vorgesehen sind; vor dem Hublauf die Stabilität des Fahrzeugs kontrollie-

ren; während des Hoch- und Herunterfahrens den Aufnahmepunkt des

Fahrzeugs kontrollieren;

- Es ist verboten, auf die Hubelemente zu steigen oder sich auf diesen

aufzuhalten.

- nach der Hochfahrt den Schalter auf “0” setzen;

- vor dem Anheben des Fahrzeugs durch Einsichtnahme des Klebeschil-

des “Lastschema” sicherstellen, dass die Last vorschriftsgemäss ist.

0. NORME GENERALI DI SICUREZZA

L’uso del sollevatore è consentito solo a personale appositamente adde-

strato e solo dopo aver letto e compreso il presente manuale; l’operatore

deve essere autorizzato da chi ricopre il ruolo di responsabile dell’impian-

to.

Sono vietate manomissioni o modiﬁche al sollevatore e ai dispositiovi di

sicurezza; nel caso in cui si veriﬁchi quanto sopra scritto il costruttore si

ritiene sollevato dai danni derivati.

Seguire inoltre le seguenti indicazioni:

- usare solo accessori e ricambi ROTARY;

- l’installazione deve essere fatta da personale autorizzato e qualiﬁcato;

- controllare che durante la fase di salita e discesa non si veriﬁchino con-

dizioni di pericolo; in tal caso arrestare immediatamente il sollevatore e

rimuovere le cause di emergenza;

- i bracci devono essere posizionati sui punti predisposti del veicolo;

prima della salita veriﬁcare la stabilità del veicolo; veriﬁcare durante la

fase di salita e discesa il punto di appoggio del veicolo;

- è vietato salire o sostare sugli organi di sollevamento;

- dopo il sollevamento posizionare l’interruttore sullo “0”;

- prima di sollevare veriﬁcare con l’adesivo “diagramma di carico” che il

carico sia corretto.

vación de la sonda térmica del motor; el rearme automático de la sonda se

veriﬁca después de 3 minutos aproximadamente.

1.4 Reajuste de los carros

Cualquier uso indebido o modiﬁcación de la máquina que no

hayan sido autorizadas por el fabricante lo eximen de los

posibles daños que puedan derivar o estar relacionados con

los actos mencionados.

Quitar o usar indebidamente los dispositivos de seguridad

comporta una violación de las Normas Europeas de Seguri-

dad.

Cada vez que se produce una diferencia en altura de los carros igual a 18

mm, el dispositivo de control se activa automáticamente, con el ﬁn de

reestablecer la nivelación correcta.

N.B. En sus du blocage mécanique ci-dessus il pourrait se produire le

déclenchement automatique de la sonde thermique du moteur. Le rétablis-

sement de la sonde se fait automatiquement après trois minutes env.

1.4 Synchronisme de levage

La responsabilité du fabricant ne peut être mise en cause

pour les dommages dérivant de toute altération ou modiﬁca-

tion de l’équipement non autorisée préalablement par le fabri-

cant.

La suppression ou l’altération des dispositifs de sécurité com-

porte une violation des Normes Européennes en matière de

sécurité.

Lorsque la différence de niveau entre les deux chariots atteint 18 mm, le

contrôleur rétablit l’alignement correct automatiquement.

Hinweis: Ausser der mechanischen Sperre kann die obige Situation das

Abschalten des Motorwärmefühlers zur Folge haben. Es muss dann das

automatische Wiedereinschalten desselben (nach ca. 3 Minuten) abgewar-

tet werden.

1.4

Gleichlaufregelung der Hubwagen

Alle eigenmächtigen Eingriffe oder Modifizierungen an Ein-

richtungen, die nicht zuvor vom Hersteller autorisiert wurden,

entheben diesen von der Haftungspﬂicht für dadurch verur-

sachte Schäden.

Die Entfernung oder der Umbau der Sicherheitseinrichtungen stellt eine Ver-

letzung der Europäischen Sicherheitsnormen dar.

Erreicht der Höhenunterschied der Hubwagen 18 mm greift automatisch die

Überwachungsvorrichtung ein und stellt den Gleichlauf wieder her.

N.B. Besides the mechanical stop described above, the motor heat probe

might be disabled. This is automatically reset after about 3 minutes.

1.4 Carriage height synchronization

Any unauthorised modiﬁcations or tampering with the equipment

release the manufacturer from any liability for damages caused

by or related to the above mentioned acts.

Removal of or tampering with safety devices constitutes an

infringement of European Safety Regulations.

Should the difference in level of the two carriages exceed 18 mm, the

control device automatically resets the correct alignment.

1. SAFETY DEVICES

1.1 Padlockable main switch

1.2 Deadman device

The lift is equipped with a “deadman” type operative system so that up or

down movement is immediately stopped when the control reverser-

switch is released.

1.3 Mechanical emergency stop

The lift is ﬁtted with mechanical stops that trigger when the limit switch

sends warning signals, at the end of an up or down run. In these situa-

tions, jog operate the movement opposite to the previous movement for a

distance of 5-10 cm.

Check the relative limit switch and replace if necessary.

1. SICHERHEITSEINRICHTUNGEN

1.1 Verriegelbarer Hauptschalter

1.2 Totmann-System

Die Hebebühne ist mit dem “Totmann”-Betriebssystem ausgerüstet. Wird die

Schalttaste losgelassen, werden die Hub- und Absenkbewegungen

unverzüglich unterbrochen.

1.3

Mechanische Not-Aus-Vorrichtung

Sollte ein Endschalter am Ende der Aufwärts- bzw. Abwärtsbewegung nicht

funktionieren, wird die Hebebühne über ein mechanisches Sperrsystem

abgestoppt.

Unter diesen Umständen die Hebebühne im umgekehrter Richtung ca. 5 - 10

cm stossweise zurückfahren.

Den Endschalter prüfen und ggf. auswechseln.

1. DISPOSITIFS DE SECURITE

1.1 Interrupteur principal verrouillable

1.2 Système (de sécurité "d'homme-mort")

Le pont élévateur est équipé d’un système (dit “d’homme mort”): les opérations de

montée ou de descente commandées sont immédiatement interrompues lors du

relâchement du poussoir.

1.3 Arrêt d'urgence (mécanique)

Le pont est équipé de butées mécaniques agissant à la ﬁn de la course de levée

ou de descente, en cas de mauvais fonctionnement des ﬁns de course. Dans ce

cas, commander par à-coups la manoeuvre opposée à l’opération précédente

pour une course de 5-10 cm. Contrôler le ﬁn de course en question et le remplacer

au besoin.

1. DISPOSITIVOS DE SEGURIDAD

1.1 Interruptor general bajo candado

1.2 Sistema “hombre muerto”

El elevador tiene un sistema de tipo “hombre muerto”, las operaciones de

subida o descenso son interrumpidas de immediato al soltar el interrup-

tor-invertidor de mando.

1.3 Bloqueo mecánico de emergencia

El elevador está dotado de topes mecánicos que actúan en caso de ano-

malías del ﬁn de carrera, al ﬁnal del recorrido de subida o de descenso.

En esos casos, mandar a intervalos la maniobra opuesta a la operación

anterior durante un recorrido de 5 - 10 cms.

Regular o sustituir el ﬁnal de carrera correspondiente.

NOTA: Además del tope mecánico, se puede también veriﬁcar la desacti-

1. DISPOSITIVI DI SICUREZZA

1.1 Interruttore generale lucchettabile

1.2 Sistema a uomo presente

Il ponte è dotato di un sistema operativo del tipo "uomo presente": le ope-

razioni di salita o di discesa, sono immediatamente interrotte al rilascio

dell'interruttore-invertitore di comando.

1.3 Blocco meccanico d'emergenza

Il ponte è dotato di arresti meccanici che agiscono in caso di anomalie del

ﬁnecorsa, al termine della corsa di salita o di discesa.

In tali situazioni comandare a scatti la manovra opposta all’operazione

precedente per una corsa di 5-10 cm.

Controllare il ﬁnecorsa interessato, ed eventualmente sostituirlo.

N.B. Oltre al blocco meccanico di cui sopra puó veriﬁcarsi il disinserimento

della sonda termica del motore; il riarmo automatico di quest’ultima avverrà

dopo circa 3 minuti.

1.4 Riallineamento carrelli

Ogni manomissione o modiﬁca dell'apparecchiatura non pre-

ventivamente autorizzate dal costruttore sollevano quest'ulti-

mo da danni derivati o riferibili agli atti suddetti.

La rimozione o manomissione dei dispositivi di sicurezza

comporta una violazione delle Norme Europee sulla sicurez-

za.

Quando la differenza di altezza tra i due carrelli raggiunge i 18mm, il dispo-

sitivo di controllo interviene automaticamente per ripristinare il corretto

allineamento.

1.7 Nut wear stop

If the lift is operated even when the limit marks are aligned (see par. 9.3),

the safety system becomes operative. The device intervention allows to

move down the charge but it does not allow to lift it.

1.5 Emergency block

This type of block occurs in the case of:

- the carriages more than 40 mm out of alignment;

- motor block

- breakage of alignment cable.

1.6 Manoeuvres permitted in emergency conditions

- When the lift is in the emergency state (see previous paragraph), no

operation is allowed by means of the “lowering” or “lifting” push buttons.

To reset the operation mode, apply to our After Sales Service.

- To remove the car from the lift, turn the pulleys by hand.

1.5 Blocco di emergenza

Questo tipo di blocco interviene in caso di:

- disallineamento dei carrelli superiore a 40 mm;

- blocco dei motori

- rottura del cavetto di allineamento.

1.6 Manovre permesse in condizioni di emergenza

- Quando il sollevatore si trova in condizione di emergenza (vedi paragrafo

precedente) non è consentita nessuna manovra di salita o discesa mediante

i comandi; per il ripristino del funzionamento contattare il Servizio Assistenza

- Se occorresse togliere il veicolo dal ponte è possibile far scendere i carrelli

azionando manualmente le pulegge.

1.7 Arresto usura chiocciole

Utilizzando il sollevatore oltre il limite indicato al par. 9.3 si avrà l’intervento

dell’arresto usura chiocciola.

L’intervento del dispositivo consente la discesa del carico e impedisce il solle-

vamento.

1.5 Arrêt d’urgence

Ce type d’arrêt intervient lorsque:

- le désalignement des chariots est supérieur à 40 mm;

- les moteurs s’arrêtent;

- le câble d’alignement se casse.

1.6 Quoi faire en cas d’arrêt de secours

- Lorsque le pont-élévateur est dans l’arrêt de secours (voir par.

précédent), on ne peut pas commander par les boutons-poussoirs ni la

montée ni la descente. Pour rétablir le fonctionnement, il faut s’adresser

au Service Après-Vente.

- Pour descendre le véhicule du pont, baisser les chariots en actionnant

les poulies manuellement.

1.7 Arret usure ecrous

Si le pont élévateur continue à travailler au délà de la limite indiquée au

par. 9.3, on provoquera l’actionnement de l’arrêt de sécurité usure écrou.

L’actionnement du dispositif permet la descente de la charge et empêche

le levage.

1.5 Bloqueo de emergencia

Este tipo de bloqueo se activa en caso de:

- desalineación de los carros superior a 40 mm;

- bloqueo de los motores;

- ruptura del cablecito de alineación.

1.6 Maniobras permitidas en condiciones de emergencia

- Cuando el elevador se encuentra en condiciones de emergencia (ver

párrafo anterior) ninguna maniobra de subida o bajada está permitida por

medio de los pulsadores. Para reestablecer el funcionamiento del eleva-

dor, consultar con el Servicio Post-Venta.

- Si fuera necesario remover el vehículo del elevador, se pueden bajar los

carros activando manualmente las poleas.

1.7 Bloqueo desgaste tuercas portantes

Insistiendo en el uso del elevador más allá del límite indicado en el párrafo

9.3, se produce el desgaste total y la parada mecánica de la tuerca. La

activación de este dispositivo permite la bajada de la carga, pero impide

la elevación.

1.5 Not-Aus

Not-Aus-Abschaltung bei:

- Höhenunterschied zwischen den beiden Hubwagen über 40 mm;

- Motorenstopp;

- Bruch des Ausrichtungsdrahtseils.

1.6 Bei Not-Aus zugelassene Manöver

- Bei Not-Aus der Hebebühne (siehe obiger Abschnitt) darf diese über die

Tasten weder hoch- noch heruntergefahren werden. Zur Wiederherstel-

lung des Betriebs den Kundendienst zu Rate ziehen.

- Ist das Fahrzeug auf den Boden zu bringen, die Hubwagen manuell über

die Riemenscheiben herunterfahren.

1.7 Stopp bei Tragmutterabnutzung

Wird die Hebebühne über die in Abschitt 9.3 angegebene Grenze hinaus

benutzt, greift die Tragmutterabnutzungs-Vorrichtung ein.

Der Eingriff dieser Vorrichtung ermöglicht das Herunterfahren der Last

und verhindert das Hochfahren.

PAGE INTENTIONELLY LEFT BLANK

ABSICHTLICH LEER GELASSENE SEITE

PAGINA LASCIATA INTENZIONALMENTE BIANCA

PAGE INTENTIONELLEMENT VIDE

PAGINA VACÍA INTENCIONADAMENTE

STICKER (Q=3200Kg)

STICKER (INSTRUCTIONS)

STICKER (SERIAL NUMBER)

STICKER (ROTARYLIFT)

STICKER (WARNING)

STICKER (MAINTENANCE)

STICKER (LOAD DISTRIBUTION)

999921550

999909850

999921570

999921580

999921590

999921610

999918080

SPMA32

SPMA32/C

Refer to full operating manual.

The lift may only be operated by authorized staff.

The lift must be used for its intended purpose only.

Do not exceed the load capacity speciﬁ ed on the Serial plate.

The weight distribution at the front/back may not exceed the value

given in the full operating manual.

Comply with the statutory Health and Safety regulations.

Do not carry persons on the lift.

Apply the vehicle handbrake after driving onto the lift and before

lifting the vehicle.

The main switch is also an emergency stop switch .In case

of emergency, turn the switch to "O".

Secure the lift against unauthorized use by locking the main switch.

Obstacles must be kept out of range of moving load and lift.

1. BEFORE LOADING:

Check that the lift is in full working order. Refer to the

Operating and Service Manual.

The lift must be fully lowered, there must be no objects, grease and

oil on the arms and rubber pads and people in the work area.

Swing the arms with the adapters free of oil and grease all the way

to the drive -through position.

Main switch to "ON".

Swing the arms under the vehicle and position the adapters on the

pick-up points recommended by the vehicle manufacturer.

If necessary, use optional adapters.

2. LIFTING:

There must be No one on the lift or in the vehicle when lifting

and lowering.

Press the "UP" button. Before the adapters make contact with

the vehicle, stop the lift .Ensure that all the arm restraints are fully engaged.

If necessary, move the arm slightly until the restraint fully engages

in the restraint gear. Do Not hit the pins with a hammer, since doing so

could damage the restraint gear teeth!

Do not leave parts lying around on the lift and on the vehicle you want to lift.

When ﬁ tting or disassembling heavy vehicle parts, make sure that the

centre of the vehicle does not shift! The vehicle must be secured beforehand.

The vehicle must always rest on 4 pick-up points or be secured

against movement.

Only continue the lifting process up to the desired height if the vehicle

is stable.

Do not leave the lift at its full rise for long periods.

Lower the lift onto the safety latches.

3. WHEN LIFTING:

Prevent the vehicle from rocking.

The vehicle doors must be closed when raising and lowering.

Monitor the load and the lift when raising and lowering.

Do not loiter within range of the moving load and lift when raising

and lowering.

Do not climb onto the raised vehicle or the lift.

4. BEFORE LOWERING THE LIFT:

Remove obstacles from under the car and lift.

Do not loiter within the work area of the lift.

5. LOWERING:

Press the "UP" button, if you want to raise the lift out of the

locking mechanism .

Press the "Lower" button and lower to the desired height .If the lift

is M-version , Operate the release lever down at the same time.

6. DRIVING OFF:

The lift must be fully lowered.

Swing the arms all the way to the drive-through position .Only then

move the vehicle.

7. SWITCHING OFF:

When the lift is not in use, turn the main switch to "OFF".

8. TROUBLESHOOTING AND MAINTENANCE:

Refer to the operating and Service Manual.

TOTAL LIFT CAPACITY

3200 KG

Refer to full operating manual.

The lift may only be operated by authorized staff.

The lift must be used for its intended purpose only.

Do not exceed the load capacity speciﬁ ed on the Serial plate.

The weight distribution at the front/back may not exceed the value

given in the full operating manual.

Comply with the statutory Health and Safety regulations.

Do not carry persons on the lift.

Apply the vehicle handbrake after driving onto the lift and before

lifting the vehicle.

The main switch is also an emergency stop switch .In case

of emergency, turn the switch to "O".

Secure the lift against unauthorized use by locking the main switch.

Obstacles must be kept out of range of moving load and lift.

1. BEFORE LOADING:

Check that the lift is in full working order. Refer to the

Operating and Service Manual.

The lift must be fully lowered, there must be no objects, grease and

oil on the arms and rubber pads and people in the work area.

Swing the arms with the adapters free of oil and grease all the way

to the drive -through position.

Main switch to "ON".

Swing the arms under the vehicle and position the adapters on the

pick-up points recommended by the vehicle manufacturer.

If necessary, use optional adapters.

2. LIFTING:

There must be No one on the lift or in the vehicle when lifting

and lowering.

Press the "UP" button. Before the adapters make contact with

the vehicle, stop the lift .Ensure that all the arm restraints are fully engaged.

If necessary, move the arm slightly until the restraint fully engages

in the restraint gear. Do Not hit the pins with a hammer, since doing so

could damage the restraint gear teeth!

Do not leave parts lying around on the lift and on the vehicle you want to lift.

When ﬁ tting or disassembling heavy vehicle parts, make sure that the

centre of the vehicle does not shift! The vehicle must be secured beforehand.

The vehicle must always rest on 4 pick-up points or be secured

against movement.

Only continue the lifting process up to the desired height if the vehicle

is stable.

Do not leave the lift at its full rise for long periods.

Lower the lift onto the safety latches.

3. WHEN LIFTING:

Prevent the vehicle from rocking.

The vehicle doors must be closed when raising and lowering.

Monitor the load and the lift when raising and lowering.

Do not loiter within range of the moving load and lift when raising

and lowering.

Do not climb onto the raised vehicle or the lift.

4. BEFORE LOWERING THE LIFT:

Remove obstacles from under the car and lift.

Do not loiter within the work area of the lift.

5. LOWERING:

Press the "UP" button, if you want to raise the lift out of the

locking mechanism .

Press the "Lower" button and lower to the desired height .If the lift

is M-version , Operate the release lever down at the same time.

6. DRIVING OFF:

The lift must be fully lowered.

Swing the arms all the way to the drive-through position .Only then

move the vehicle.

7. SWITCHING OFF:

When the lift is not in use, turn the main switch to "OFF".

8. TROUBLESHOOTING AND MAINTENANCE:

Refer to the operating and Service Manual.

TOTAL LIFT CAPACITY

3200 KG

Refer to full operating manual.

The lift may only be operated by authorized staff.

The lift must be used for its intended purpose only.

Do not exceed the load capacity speciﬁ ed on the Serial plate.

The weight distribution at the front/back may not exceed the value

given in the full operating manual.

Comply with the statutory Health and Safety regulations.

Do not carry persons on the lift.

Apply the vehicle handbrake after driving onto the lift and before

lifting the vehicle.

The main switch is also an emergency stop switch .In case

of emergency, turn the switch to "O".

Secure the lift against unauthorized use by locking the main switch.

Obstacles must be kept out of range of moving load and lift.

1. BEFORE LOADING:

Check that the lift is in full working order. Refer to the

Operating and Service Manual.

The lift must be fully lowered, there must be no objects, grease and

oil on the arms and rubber pads and people in the work area.

Swing the arms with the adapters free of oil and grease all the way

to the drive -through position.

Main switch to "ON".

Swing the arms under the vehicle and position the adapters on the

pick-up points recommended by the vehicle manufacturer.

If necessary, use optional adapters.

2. LIFTING:

There must be No one on the lift or in the vehicle when lifting

and lowering.

Press the "UP" button. Before the adapters make contact with

the vehicle, stop the lift .Ensure that all the arm restraints are fully engaged.

If necessary, move the arm slightly until the restraint fully engages

in the restraint gear. Do Not hit the pins with a hammer, since doing so

could damage the restraint gear teeth!

Do not leave parts lying around on the lift and on the vehicle you want to lift.

When ﬁ tting or disassembling heavy vehicle parts, make sure that the

centre of the vehicle does not shift! The vehicle must be secured beforehand.

The vehicle must always rest on 4 pick-up points or be secured

against movement.

Only continue the lifting process up to the desired height if the vehicle

is stable.

Do not leave the lift at its full rise for long periods.

Lower the lift onto the safety latches.

3. WHEN LIFTING:

Prevent the vehicle from rocking.

The vehicle doors must be closed when raising and lowering.

Monitor the load and the lift when raising and lowering.

Do not loiter within range of the moving load and lift when raising

and lowering.

Do not climb onto the raised vehicle or the lift.

4. BEFORE LOWERING THE LIFT:

Remove obstacles from under the car and lift.

Do not loiter within the work area of the lift.

5. LOWERING:

Press the "UP" button, if you want to raise the lift out of the

locking mechanism .

Press the "Lower" button and lower to the desired height .If the lift

is M-version , Operate the release lever down at the same time.

6. DRIVING OFF:

The lift must be fully lowered.

Swing the arms all the way to the drive-through position .Only then

move the vehicle.

7. SWITCHING OFF:

When the lift is not in use, turn the main switch to "OFF".

8. TROUBLESHOOTING AND MAINTENANCE:

Refer to the operating and Service Manual.

TOTAL LIFT CAPACITY

3200 KG

Refer to full operating manual.

The lift may only be operated by authorized staff.

The lift must be used for its intended purpose only.

Do not exceed the load capacity speciﬁ ed on the Serial plate.

The weight distribution at the front/back may not exceed the value

given in the full operating manual.

Comply with the statutory Health and Safety regulations.

Do not carry persons on the lift.

Apply the vehicle handbrake after driving onto the lift and before

lifting the vehicle.

The main switch is also an emergency stop switch .In case

of emergency, turn the switch to "O".

Secure the lift against unauthorized use by locking the main switch.

Obstacles must be kept out of range of moving load and lift.

1. BEFORE LOADING:

Check that the lift is in full working order. Refer to the

Operating and Service Manual.

The lift must be fully lowered, there must be no objects, grease and

oil on the arms and rubber pads and people in the work area.

Swing the arms with the adapters free of oil and grease all the way

to the drive -through position.

Main switch to "ON".

Swing the arms under the vehicle and position the adapters on the

pick-up points recommended by the vehicle manufacturer.

If necessary, use optional adapters.

2. LIFTING:

There must be No one on the lift or in the vehicle when lifting

and lowering.

Press the "UP" button. Before the adapters make contact with

the vehicle, stop the lift .Ensure that all the arm restraints are fully engaged.

If necessary, move the arm slightly until the restraint fully engages

in the restraint gear. Do Not hit the pins with a hammer, since doing so

could damage the restraint gear teeth!

Do not leave parts lying around on the lift and on the vehicle you want to lift.

When ﬁ tting or disassembling heavy vehicle parts, make sure that the

centre of the vehicle does not shift! The vehicle must be secured beforehand.

The vehicle must always rest on 4 pick-up points or be secured

against movement.

Only continue the lifting process up to the desired height if the vehicle

is stable.

Do not leave the lift at its full rise for long periods.

Lower the lift onto the safety latches.

3. WHEN LIFTING:

Prevent the vehicle from rocking.

The vehicle doors must be closed when raising and lowering.

Monitor the load and the lift when raising and lowering.

Do not loiter within range of the moving load and lift when raising

and lowering.

Do not climb onto the raised vehicle or the lift.

4. BEFORE LOWERING THE LIFT:

Remove obstacles from under the car and lift.

Do not loiter within the work area of the lift.

5. LOWERING:

Press the "UP" button, if you want to raise the lift out of the

locking mechanism .

Press the "Lower" button and lower to the desired height .If the lift

is M-version , Operate the release lever down at the same time.

6. DRIVING OFF:

The lift must be fully lowered.

Swing the arms all the way to the drive-through position .Only then

move the vehicle.

7. SWITCHING OFF:

When the lift is not in use, turn the main switch to "OFF".

8. TROUBLESHOOTING AND MAINTENANCE:

Refer to the operating and Service Manual.

TOTAL LIFT CAPACITY

3200 KG

Refer to full operating manual.

The lift may only be operated by authorized staff.

The lift must be used for its intended purpose only.

Do not exceed the load capacity speciﬁ ed on the Serial plate.

The weight distribution at the front/back may not exceed the value

given in the full operating manual.

Comply with the statutory Health and Safety regulations.

Do not carry persons on the lift.

Apply the vehicle handbrake after driving onto the lift and before

lifting the vehicle.

The main switch is also an emergency stop switch .In case

of emergency, turn the switch to "O".

Secure the lift against unauthorized use by locking the main switch.

Obstacles must be kept out of range of moving load and lift.

1. BEFORE LOADING:

Check that the lift is in full working order. Refer to the

Operating and Service Manual.

The lift must be fully lowered, there must be no objects, grease and

oil on the arms and rubber pads and people in the work area.

Swing the arms with the adapters free of oil and grease all the way

to the drive -through position.

Main switch to "ON".

Swing the arms under the vehicle and position the adapters on the

pick-up points recommended by the vehicle manufacturer.

If necessary, use optional adapters.

2. LIFTING:

There must be No one on the lift or in the vehicle when lifting

and lowering.

Press the "UP" button. Before the adapters make contact with

the vehicle, stop the lift .Ensure that all the arm restraints are fully engaged.

If necessary, move the arm slightly until the restraint fully engages

in the restraint gear. Do Not hit the pins with a hammer, since doing so

could damage the restraint gear teeth!

Do not leave parts lying around on the lift and on the vehicle you want to lift.

When ﬁ tting or disassembling heavy vehicle parts, make sure that the

centre of the vehicle does not shift! The vehicle must be secured beforehand.

The vehicle must always rest on 4 pick-up points or be secured

against movement.

Only continue the lifting process up to the desired height if the vehicle

is stable.

Do not leave the lift at its full rise for long periods.

Lower the lift onto the safety latches.

3. WHEN LIFTING:

Prevent the vehicle from rocking.

The vehicle doors must be closed when raising and lowering.

Monitor the load and the lift when raising and lowering.

Do not loiter within range of the moving load and lift when raising

and lowering.

Do not climb onto the raised vehicle or the lift.

4. BEFORE LOWERING THE LIFT:

Remove obstacles from under the car and lift.

Do not loiter within the work area of the lift.

5. LOWERING:

Press the "UP" button, if you want to raise the lift out of the

locking mechanism .

Press the "Lower" button and lower to the desired height .If the lift

is M-version , Operate the release lever down at the same time.

6. DRIVING OFF:

The lift must be fully lowered.

Swing the arms all the way to the drive-through position .Only then

move the vehicle.

7. SWITCHING OFF:

When the lift is not in use, turn the main switch to "OFF".

8. TROUBLESHOOTING AND MAINTENANCE:

Refer to the operating and Service Manual.

TOTAL LIFT CAPACITY

3200 KG

2 5 4 1

18080

EN1493-2010

3000

3100

3200

128019201000

1240

1860

900

1200

1800

800

Q=P1+P2

RIPARTIZIONE DEL CARICO

LOAD DISTRIBUTION

GEWICHT VERTEILUNG

REPARTITION DE CHARGE

REPARTICION DE LA CARGA

P2(P1)

P1(P2)

2900

1160

1740

700

1.8 Indication of outstanding risks

OUR LIFT HAS BEEN MANUFACTURED ACCORDING TO THE MOST STRINGENT STANDARDS REQUIRED BY APPLICABLE DIRECTIVES.

RISK ANALYSIS HAS BEEN CAREFULLY MADE AND ALL HAZARDS HAVE, AS FAR AS POSSIBLE, BEEN ELIMINATED. ANY OUTSTANDING RISKS ARE

EVIDENCED IN THIS MANUAL AND ON THE MACHINE BY PICTOGRAMS.

1.9 Pictograms on lift

SEE FIG.

IN THE EVENT OF THESE PICTOGRAMS BEING DAMAGED, THEY MUST BE REPLACED BY NEW ONES AVAILABLE FROM ROTARY.

1.8 Informations sur les risques résiduels

L’ÉLÉVATEUR OBJET DE LA PRÉSENTE NOTICE A ÉTÉ FABRIQUÉ DANS LE RESPECT DE NORMES SÉVÈRES POUR RÉPONDRE AUX QUALITÉS REQUI-

SES PAR LES DIRECTIVES RÉGISSANT CES APPAREILS.

UNE ANALYSE ATTENTIVE DES RISQUES A ÉTÉ RÉALISÉE ET LES DANGERS ONT ÉTÉ ÉLIMINÉS DANS LA MESURE DU POSSIBLE.

LES RISQUES RÉSIDUELS ÉVENTUELS ONT ÉTÉ SIGNALÉS DANS LA PRÉSENTE NOTICE ET SUR LA MACHINE AU MOYEN DE PICTOGRAMMES.

1.9 Pictogrammes présents sur l’élévateur

VOIR FIGURE

LES PICTOGRAMMES ENDOMMAGÉS DOIVENT ÊTRE REMPLACÉS. S’ADRESSER DIRECTEMENT À LA SOCIÉTÉ ROTARY.

1.8 Indicaciones de los riesgos residuos

NUESTRO ELEVADOR SE HA CONSTRUIDO APLICANDO NORMAS SEVERAS PARA RESPONDER A LOS REQUISITOS EXIGIDOS POR LAS NORMATIVAS

PERTINENTES.

EL ANÁLISIS DE LOS RIESGOS SE EFECTÚO CON EL MÁXIMO CUIDADO Y LOS PELIGROS FUERON, EN LO QUE FUE POSIBLE, ELIMINADOS.

EVENTUALES RIESGOS RESIDUOS SE EVIDENCIAN EN EL PRESENTE MANUAL Y EN LA MÁQUINA MEDIANTE PICTOGRAMAS DE CUIDADO.

1.9 Pictogramas en el elevador

VER FIG.

EN EL CASO DE QUE ESTOS PICTOGRAMAS SE ESTROPEEN, ES NECESARIO SUSTITUIRLOS, SOLICITÁNDOLOS A LA EMPRESA ROTARY

1.8 Hinweise zu den Restrisiken

BEI DER ENTWICKLUNG UNSERER HEBEBÜHNE WURDEN STRENGE NORMEN ZUR ÜBEREINSTIMMUNG MIT DEN IN DEN EINSCHLÄGIGEN RICHT-

LINIEN VORGESCHRIEBENEN ANFORDERUNGEN ANGEWANDT.

DIE ANALYSE DER RISIKEN WURDE MIT GRÖSSTER SORGFALT AUSGEFÜHRT UND DIE GEFÄHRDUNGEN WURDEN, SOWEIT MÖGLICH, BESEITIGT.

EVENTUELLE RESTRISIKEN WERDEN IN DIESER BEDIENUNGSANLEITUNG UND AUF DEN GEFAHRENZEICHEN AUF DER AUSRÜSTUNG ANGEZEIGT.

1.9 Auf der Hebebühne vorhandene Gefahrenzeichen

SIEHE ABB.

EVTL. BESCHÄDIGTE GEFAHRENZEICHEN SIND BEI DER ROTARY ANZUFORDERN UND ZU ERSETZEN.

1.8 Indicazioni dei rischi residui

IL NOSTRO SOLLEVATORE È STATO REALIZZATO APPLICANDO SEVERE NORME PER LA RISPONDENZA AI REQUISITI RICHIAMATI DALLE DIRETTIVE

PERTINENTI.

L'ANALISI DEI RISCHI È STATA EFFETTUATA ACCURATAMENTE ED I PERICOLI SONO STATI, PER QUANTO POSSIBILE, ELIMINATI.

EVENTUALI RISCHI RESIDUI SONO EVIDENZIATI NEL PRESENTE MANUALE E SULLA MACCHINA MEDIANTE PITTOGRAMMI DI ATTENZIONE.

1.9 Pittogrammi presenti sul sollevatore

VEDI FIGURA.

NEL CASO CHE QUESTI PITTOGRAMMI SI DANNEGGINO È NECESSARIO SOSTITUIRLI RICHIEDENDOLI ALLA ROTARY.

P1 P2

P1P2

3200 Kg

2. INTENDED USE

The product is designed for lifting vehicles. The capacity is indicated on

the serial number plate.

Vehicles having the following characteristics may be lifted:

- weight not exceeding lift capacity

- load distribution on supporting points

- minimum distance of pickup points (track): 1000 mm

For lower distance values, the lift capacity will be reduced. In this case or

in other cases not covered by this manual, the manufacturer should be

contacted.

- The lift may only be used in enclosed areas where there is no danger of

explosion or ﬁre.

- The lift is not suitable for use where vehicle washing is contemplated.

2. BESTIMMUNGSGEMÄSSE VERWENDUNG

Das Produkt ist zum Heben von Fahrzeugen vorgesehen. Die entsprechen-

de Tragfähigkeit ist auf dem Seriennummernschild angegeben.

Gestattet wird das Heben von Fahrzeugen, die den folgenden Anforderun-

gen entsprechen:

- Gewicht, das die Tragfähigkeit der Hebebühne nicht überschreitet.

- Lastverteilung auf den Abstützpunkten

- Mindestabstand der Hebepunkte (Spurweite): 1000 mm

Bei geringerem Abstand wird die Tragfähigkeit der Hebebühne reduziert.

In solchen und anderen, nicht von dieser Anleitung vorgesehenen Fällen

den Hersteller zu Rate ziehen.

- Die Hebebühne darf ausschliesslich in geschlossenen Räumen, wo

weder Explosions- noch Brandgefahr besteht, gefahren werden.

- Die Hebebühne ist nicht zum Waschen von Fahrzeugen geeignet.

2. DESTINATION D’USAGE

Le pont élévateur est destiné au levage de véhicules; la portée est celle

indiquée sur la plaque matricule.

Il ne peut être utilisé que pour le levage de véhicules répondant aux

caractéristiques suivantes:

- le poids ne doit pas dépasser la portée du pont élévateur,

- distribution de la charge sur les points d’appui

- distance minimale entre les points de levage (voie): 1000 mm.

Pour des valeurs de distance inférieures, la portée du pont élévateur est

réduite. Dans ce cas ou d’autres qui ne sont pas prévus dans la présente

notice, il sera opportun de prendre contact avec le fabricant.

- le pont élévateur ne peut être utilisé qu’à l’intérieur de locaux fermés, à

l’abri de tout risque d’explosion ou d’incendie.

- le pont élévateur ne peut être utilisé pour laver les véhicules.

2. DESTINACIÓN DE USO

El producto está destinado a la elevación de autovehículos; la capacidad

está indicada en la placa de matrícula.

Está permitida la elevación de autovehículos que respondan a las siguien-

tes características:

- peso no superior a la capacidad del elevador

- distribución de la carga en los puntos de apoyo

- distancia mínima de los puntos de elevación (carril): 1000 mm.

Para valores de distancia inferiores, la capacidad del elevador se reduce.

Por tanto, en esos casos y para otros no contemplados en el presente

manual, será conveniente ponerse en contacto con el fabricante.

- El uso del elevador está permitido exclusivamente en el interior de loca-

les cerrados, en los que no exista peligro de explosión o incendio.

- El elevador no es adecuado para usos que prevean el lavado de vehícu-

los.

2. DESTINAZIONE D’USO

Il prodotto è destinato al sollevamento di autoveicoli; la portata è quella

indicata nella targhetta matricola.

E’ consentito il sollevamento di autoveicoli rispondenti ai seguenti requisi-

ti:

- peso non superiore alla portata del sollevatore

- ripartizione del carico sui punti di appoggio

- distanza minima dei punti di sollevamento (carreggiata): mm.1000

Per valori di distanza inferiori, la portata del sollevatore viene ridotta. Per-

tanto in questi casi o per altri non contemplati nel presente manuale, sarà

opportuno contattare il costruttore.

- l’uso del sollevatore è consentito esclusivamente all’interno di locali

chiusi, ove non sussistano pericoli di esplosione o incendio.

- il sollevatore non è idoneo ad un utilizzo che preveda il lavaggio dei vei-

coli.

2510

92 min

152 max

3900

2042 max

926

1440

550

1100

3132

2637

2389

2664

3. TECHNISCHE DATEN

Tragkraft 3200 kg

Dreiphasenmotor 230/400 V - 50 Hz - 3.5 kW (2 motoren)

Gewicht 520 kg

Geräuschpegel ≤70 dB (A)

3. TECHNICAL DETAILS

Capacity 3200 kg

Three-phase motor 230/400 V - 50 Hz - 3.5 kW (2 motors)

Weight 520 kg

Noise level ≤70 dB (A)

3. DATI TECNICI

Portata 3200 kg

Motore trifase 230/400 V - 50 Hz - 3.5 kW (2 motori)

Peso 520 kg

Rumorosità ≤70 dB (A)

3. DONNEES TECHNIQUES

Portée 3200 kg

Moteurs triphasés 230/400 V - 50 Hz - 3.5 kW (2 moteurs)

Poids 520 kg

Niveau de bruit ≤70 dB (A)

3. DATOS TÉCNICOS

Capacidad 3200 kg

Motor Trifásico 230/400 V - 50 Hz - 3.5 kW (2 motores)

Peso 520 kg

Nivel de ruido ≤70 dB (A)

kg 400

kg 1200

La pagina sta caricando ...

Rotary SPMA32 Manuale del proprietario

Marca: Rotary

Modello: SPMA32

Tipo: Manuale del proprietario

Questo manuale è adatto anche per

Scarica il pdf

rapporto

in altre lingue

English: Rotary SPMA32 Owner's manual
français: Rotary SPMA32 Le manuel du propriétaire
español: Rotary SPMA32 El manual del propietario
Deutsch: Rotary SPMA32 Bedienungsanleitung

Rotary SPMA32 Manuale del proprietario

Questo manuale è adatto anche per

Rotary SPMA32 Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti