Aeg-Electrolux T8030TW Manuale utente

Categoria
Asciugatrici
Tipo
Manuale utente
8030 TW ELECTRONIC
User manual Condenser dryer with
heat pump
Istruzioni per l’uso Asciugabiancheria a
condensa con pompa di
calore
Thank you for choosing one of our high-quality products.
To ensure optimal and regular performance of your appliance please read this
instruction manual carefully. It will enable you to navigate all processes perfectly
and most efficiently. To refer to this manual any time you need to, we recommend
you to keep it in a safe place. And please pass it to any future owner of the appliance.
We wish you much joy with your new appliance.
Contents
Operating Instructions 3
Important safety information 3
Environment 5
Product description 6
Control panel 7
Control panel 7
Display 7
Before first use 8
Programme overview 8
Daily use 10
Sorting laundry 10
Average laundry weights 11
Switching machine/drum light on 11
Laundry loading 11
Selecting the programme 12
EXTRA DELICATE (EXTRA SANFT) function
12
INTENSIVE (TROCKNEN PLUS) function
12
LONG ANTI-CREASE (KNITTERSCHUTZ PLUS)
function 12
BUZZER (SIGNAL) function 13
TIME (ZEITWAHL) function 13
DELAY START (ZEITVORWAHL) 13
CHILD LOCK function 13
Starting the programme 14
Changing programme 14
Laundry unloading 14
Care and cleaning 15
Cleaning fluff filter 15
Cleaning the door seal 16
Emptying the water reservoir 16
Cleaning heat exchanger filters 17
Cleaning the drum 19
Clean operating screen and housing 19
What to do if ... 19
Machine settings 21
Technical specifications 22
Installation 23
Transporting the appliance 23
Appliance positioning 23
Removing transport safety packaging 24
Electrical connection 24
Changing door stop 24
Special accessories 25
Service 26
Subject to change without notice
2
Contents
Operating Instructions
Important safety information
In the interest of your safety and to ensure the correct use, before installing and
first using the appliance, read this user manual carefully, including its hints and
warnings. To avoid unnecessary mistakes and accidents, it is important to ensure
that all people using the appliance are thoroughly familiar with its operation and
safety features. Save these instructions and make sure that they remain with the
appliance if it is moved or sold, so that everyone using it through its life will be
properly informed on appliance use and safety.
- Please read the instruction book before using this appliance.
General safety
It is dangerous to alter the specifications or attempt to modify this product in any way.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Make sure that small children and pets do not climb into the drum. To avoid this, please
check into the drum before using.
Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp
material can cause extensive damage and must not be placed into the machine.
In order to avoid danger of fires caused by excessive drying, do not use appliance to dry
the following items: Cushions, quilts and the like (these items accumulate heat).
Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed
articles and clothes or pillows fitted with foam rubber pads should not be dried in the
tumble dryer.
Always unplug the appliance after use, cleaning and maintenance.
Under no circumstances should you attempt to repair the machine yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact
your local Service Centre. Always insist on genuine spare parts.
Items that have been soiled with substances such as cooking oil acetone, petrol, kerosene,
spot removers, turpentine, waxes and wax removers should be washed in hot water with
an extra amount of detergent before being dried in the tumble dryer.
Danger of explosion: Never tumble dry items that have been in contact with inflam-
mable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these sub-
stances are volatile, they could cause an explosion. Only tumble dry items washed with
water.
Risk of fire: items that have been spotted or soaked with vegetable or cooking oil
constitute a fire hazard and should not be placed in the tumble dryer.
If you have washed your laundry with stain remover you must execute an extra rinse
cycle before loading your tumble dryer.
Please make sure that no gas lighters or matches have accidentally been left in pockets
of garments to be loaded into appliance
Important safety information
3
WARNING!
Never stop a tumble dry before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated. Risk of fire!
Lint must not be allowed to accumulate around the tumble dryer.
Risk of electric shock! Do not spray down the appliance with jets of water.
The final part of a tumble dryer cycle occurs without heat ( cool down cycle ) to ensure
that the items are left at a temperature that ensures that items will not be damaged.
The tumble dryer is not to be used if industrial chemicals have been used for cleaning.
Ensure you have good ventilation in the installation room to avoid the back flow of gases
into the room from appliances burning other fuels, including open fires.
Installation
This appliance is heavy. Care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in doubt, do not use it
and contact the Service Centre.
All packaging must be removed before use. Serious damage can occur to the product
and to property if this is not adhered to. See relevant section in the user manual.
Any electrical work required to install this appliance should be carried out by a qualified
electrician or competent person.
If the machine is situated on a carpeted floor, please adjust the feet in order to allow air
to circulate freely under the appliance.
After having installed the appliance, check that it is not pressing or standing on its
electrical supply cable.
If the tumble dryer is placed on top of a washing machine, it is compulsory to use the
stacking kit (optional accessory).
Use
This appliance is designed for domestic use. It must not be used for purposes other than
those for which it was designed.
Only wash fabrics which are designed to be machine dried. Follow the instructions on
each garment label.
Do not dry unwashed items in the tumble dryer.
Do not overload the appliance. See the relevant section in the user manual.
Clothes which are dripping wet should not be placed in the dryer.
Garments which have been in contact with volatile petroleum products should not be
machine dried. If volatile cleaning fluids are used, care should be taken to ensure that
the fluid is removed from the garment before placing in the machine.
Never pull the power supply cable to remove the plug from the socket; always take hold
of the plug itself.
Never use the tumble dryer if the power supply cable, the control panel, the working
surface or the base are damaged so that the inside of the tumble dryer is accessible.
Fabric softeners, or similar products should be used as specified by the fabric softener
instructions.
Caution - hot surface : Do not touch the door light cover surface when the light is
switched on.
(Only dryers equipped with internal drum light)
4
Important safety information
Child safety
This machine is not intended for use by young children or infirm persons without su-
pervision.
Children often do not recognise the hazards associated with electrical appliances. Chil-
dren should be supervised to ensure that they do not play with the appliance.
The packaging components (e.g. plastic film, polystyrene) can be dangerous to children
- danger of suffocation! Keep them out of children’s reach.
Keep all detergents in a safe place out of children’s reach.
Make sure that children or pets do not climb into the drum.
Environment
The symbol on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please contact
your local council, your household waste disposal service or the shop where you purchased
the product.
Environmental tips
In the dryer, laundry becomes fluffy and soft. Fabric softeners are not therefore needed
when washing.
Your dryer will function most economically if you:
Always keep the ventilation slots on the base of the dryer unobstructed;
Use the loading volumes specified in the programme overview;
Ensure you have good ventilation in the installation room;
Clean the micro-fine filter and fine strainer after each drying cycle;
Spin the laundry well before drying.
Energy consumption depends on spinning speed set in washing machine. Higher spinning
speed - lower energy consumption.
Environmental information
The packaging materials are environmentally friendly and can be recycled. The plastic com-
ponents are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging
materials in the appropriate container at the community waste disposal facilities.
The heat pump of your dryer contains a closed refrigerant circuit filled with a refrigerant
which is free from fluoro-chloro-hydrocarbons. The refrigerant circuit in the heat pump
must not be damaged.
Environment
5
WARNING!
When a unit is no longer being used:
Pull the plug out of the socket.
Cut off the cable and plug and dispose of them.
Dispose of the door catch. This prevents children from trapping themselves inside and
endangering their lives.
Product description
11
2
3
7
9
5
1
4
8
10
6
12
1 Control panel
2 Water reservoir
3 Drum light
4 Fine fluff filters
5 Course fluff filters
6 Fluff filters
7 Rating plate
8 Loading door (reversible)
9 Heat exchanger door, fluff filter, heat exchanger
10 Button for opening door in plinth
11 Ventilation grille
6
Product description
12 Adjustable feet
Control panel
Control panel
6 5 4
321
1 Programme selector and on/off switch
2 Function buttons
3 START PAUSE button
4 DELAY START (ZEITVORWAHL) button
5 Display
6 Status LED
Display
1 time to end / error message
2 warnings
3 long anti-crease icon
4 cycle phase status
5 delay time option icon
6 child lock icon
Display description
drying (drying phase
indicator)
cooling (drying phase
indicator)
crease guard (drying
phase indicator)
long anti-crease
1
2
34
5
6
Control panel
7
Display description
empty water reservoir
(warning)
clean filters (warning)
clean condenser
(warning)
child lock
- -
delay start cycle duration
time program scope
(10 min - 3h)
delay start scope
Before first use
WARNING!
If the appliance was not transported in an upright position, leave it to stand for 12 hours
before connecting it to the electricity supply and using it for the first time, so that the oil
can flow back to the compressor. Otherwise the compressor could be damaged.
In order to remove any residues which may have been produced during production, wipe
the dryer drum with a damp cloth or carry out a brief drying cycle (ca. 30 min.) with damp
cloths in the machine.
Programme overview
Programmes
max. load
(weight
when dry)
Application/properties Options
Care
mark
COTTONS (BAUMWOLLE)
EXTRA DRY (EX-
TRATROCKEN)
7 kg
Thorough drying of thick or multi-
layered fabrics, e.g. terry towel-
ling items, bathrobes.
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
CUPBOARD DRY
(SCHRANKTROCK-
EN)
7 kg
Thorough drying of fabrics of
even thicknesses, e.g. terry towel-
ling items, knitwear, towels.
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
IRON DRY (BÜGEL-
TROCKEN)
7 kg
For normal thickness cotton or
linen laundry, e.g. bedding, table
linen.
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
SYNTHETICS (MISCHGEWEBE)
EXTRA DRY (EX-
TRATROCKEN)
3 kg
Thorough drying of thick or multi-
layered fabrics, e.g. pullovers,
bedding, table linen.
all except TIME
(ZEITWAHL)
1)
8
Before first use
Programmes
max. load
(weight
when dry)
Application/properties Options
Care
mark
CUPBOARD DRY
(SCHRANKTROCK-
EN)
3 kg
For thin fabrics which are not ir-
oned, e.g. easy care shirts, table
linen, baby clothes, socks, lingerie
with bones or wires.
all except TIME
(ZEITWAHL)
1)
IRON DRY (BÜGEL-
TROCKEN)
3 kg
For thin fabrics which are also to
be ironed, e.g. knitwear, shirts.
all except TIME
(ZEITWAHL)
1)
SPECIAL
TIME PRO-
GRAMME (ZEIT-
PROGRAMM)
7 kg
For drying of individual items of
laundry.
all except EXTRA
DELICATE (EXTRA
SANFT) and IN-
TENSIVE
(TROCKNEN
PLUS)
BED LINEN (BETT-
WÄSCHE)
3 kg
Bed linen (single and double
sheet, pillowcase, bedspread, du-
vet cover).
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
JEANS 7 kg
For leisure clothing, such as jeans,
sweat-shirts, etc., of different ma-
terial thicknesses (e.g. at the neck,
cuffs and seams).
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
SPORTS LIGHT
(SPORTKLEIDUNG)
2 kg
For sportswear, thin fabrics, poly-
ester, which are not ironed.
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
EASY IRON PLUS
(LEICHTBÜGELN
PLUS)
1 kg (or 5
shirts)
Special program with anti-crease
mechanism for easy care fabrics
such shirts and blouses; for mini-
mum ironing effort. The results
depend on the type of fabric and
its finish. Place fabrics in the dryer
straight after spinning; once
dried, immediately remove fabrics
and place on a clothes hanger.
all except EXTRA
DELICATE (EXTRA
SANFT) and TIME
(ZEITWAHL)
FRESHEN-UP
(AUFFRISCHEN)
1 kg
For refreshing or gently cleaning
textiles with commercially avail-
able dry cleaning products.
LONG ANTI-
CREASE (KNIT-
TERSCHUTZ
PLUS), BUZZER
(SIGNAL), DELAY
START (ZEITVOR-
WAHL)
Programme overview
9
Programmes
max. load
(weight
when dry)
Application/properties Options
Care
mark
WOOL CARE
(WOLLPFLEGE)
1 kg
Special programme for briefly
treating woollens with warm air,
after they have been dried natu-
rally, worn or stored for long pe-
riods. Wool fibres stand up and
the wool becomes soft and cosy.
Recommendation: Remove fab-
rics immediately after drying.
BUZZER (SIG-
NAL), DELAY
START (ZEITVOR-
WAHL)
1) select EXTRA DELICATE (EXTRA SANFT)
Daily use
Sorting laundry
Sort by fabric type:
Cotton/linen for programmes in COTTONS (BAUMWOLLE) programme group.
Mixtures and synthetics for programmes in SYNTHETICS (MISCHGEWEBE) programme
group.
Sort by care label: The care labels mean:
Drying in the tumble dryer possible in principle
Drying at normal temperature
Drying at reduced temperature
Drying in the tumble dryer not possible
Do not place in the appliance any wet laundry which is not specified on the care label as
being suitable for tumble-drying.
This appliance can be used for all wet laundry items which are labelled as suitable for
tumble-drying.
Do not dry new, coloured textiles together with light-coloured laundry items. Textile
colours may bleed.
Do not dry cotton jersey and knitwear with the EXTRA programme. Items may shrink!
Wool and wool-like textiles can be dried using the WOOL CARE (WOLLPFLEGE) pro-
gramme.
Preparing laundry
To avoid laundry becoming tangled: close zips, button up duvet covers and tie loose ties
or ribbons (e.g. of aprons).
Empty pockets. Remove metal items (paper clips, safety pins, etc).
Turn items with double-layered fabrics inside out (e.g. with cotton-lined anoraks, the
cotton layer should be outermost). These fabrics will then dry better.
Do not overload the appliance. Observe max. loading volume of 7 kg.
10
Daily use
Average laundry weights
bathrobe 1200 g
quilt cover 700 g
man’s work shirt 600 g
man’s pyjamas 500 g
sheet 500 g
tablecloth 250 g
man’s shirt 200 g
night dress 200 g
pillow case 200 g
towelling towel 200 g
blouse 100 g
ladies’ briefs 100 g
men’s underpants 100 g
napkin 100 g
tea cloth 100 g
Switching machine/drum light on
Turn the programme selector to any programme or turn it to DRUM LIGHT (BELEUCHTUNG).
The machine has been switched on. When the loading door is opened, the drum light is
illuminated.
Laundry loading
1. Open loading door:
Use force to push against the loading door
(push point)
2. Load your laundry (do not force it in).
CAUTION!
Do not jam laundry in between the loading
door and rubber seal.
3. Close loading door securely. Lock must
audibly lock.
Daily use
11
Selecting the programme
Use the programme selector to set the programme
you require. The estimated time to end of the pro-
gramme appears on the LCD, e.g.
( hours .
minutes ).
During the cycle, time elapses by steps of one mi-
nute.
EXTRA DELICATE (EXTRA SANFT) function
For especially gentle drying of sensitive fabrics
with the
care label and for temperature-sen-
sitive textiles (e.g. acrylic, viscose). Programme is
executed with reduced heat.
Delicate function is only suitable for use with
loads of up to 3 kg.
To activate it:
1. Choose the drying programme.
2. Press EXTRA DELICATE (EXTRA SANFT) button
(1) - the LED above is on.
To deselect function press again EXTRA DELICATE (EXTRA SANFT) button (1). The LED above
is off.
INTENSIVE (TROCKNEN PLUS) function
You can increase the drying result by using the INTENSIVE (TROCKNEN PLUS) function
To activate it:
1. Choose the drying programme.
2. Press INTENSIVE (TROCKNEN PLUS) button (2) - the LED above is on.
To deselect function press again INTENSIVE (TROCKNEN PLUS) button (2). The LED above is
off.
LONG ANTI-CREASE (KNITTERSCHUTZ PLUS) function
This function prolongs anti-crease phase what gives 90 min. in total. The drum rotates in
intervals during this phase. The laundry thereby remains relaxed and free of creases.
To activate it:
1. Choose the drying programme.
2. Press LONG ANTI-CREASE (KNITTERSCHUTZ PLUS) button (3) - the LED above is on and
display shows the following icon
.
If this additional function is selected, the anti-crease phase at the end of the drying cycle
is lengthened by 60 minutes. The laundry can be removed at any time during the anti-
crease phase.
12
Daily use
To deselect function press again LONG ANTI-CREASE (KNITTERSCHUTZ PLUS) button. The
LED above is off and 90 from the icon disappears
.
BUZZER (SIGNAL) function
The appliance is supplied with the BUZZER (SIGNAL) function deactivated.
The buzzer sounds or plays a tune when activated during:
cycle end
anti-crease phase and when phase starts or ends
cycle interruption by a warning
–alarm
To activate it:
1. Choose the drying programme.
2. Press BUZZER (SIGNAL) button (4) - the LED above is on.
To deselect function press again BUZZER (SIGNAL) button (4). The LED above is off.
TIME (ZEITWAHL) function
To select the programme duration after setting the TIME PROGRAMME (ZEITPROGRAMM) .
You can select a programme duration from 10 mins to 3 hrs in 10-minute steps.
1. Turn the programme knob to the TIME PROGRAMME (ZEITPROGRAMM). The blinking
10' appears in the display. (corresponding to the cooling phase).
2. Press the TIME (ZEITWAHL) button (5) repeatedly until the desired programme duration
is shown in the display, e.g.
for a programme of 20 minutes.
If the programme duration is not selected, the duration is automatically set to 10 mins.
DELAY START (ZEITVORWAHL)
With the DELAY START (ZEITVORWAHL) button (7), you can delay the start of a
programme by between 30 minutes (30') and a maximum of 20 hours (20h).
1. Select the programme and additional functions.
2. Press the DELAY START (ZEITVORWAHL) button (7) as many times as necessary until the
required start delay appears on the display, e.g.
if the programme is to be started
in 12 hours.
If the display is showing 20h and you press the button again, the time delay will
be cancelled. The display will show 0'and then the duration of the selected pro-
gramme.
3. To activate the delay timer, press the START PAUSE button (6). The amount of time
remaining until the programme is set to start is continuously displayed (e.g. 15h, 14h,
13h, … 30' etc).
CHILD LOCK function
The child lock can be set to prevent a programme being accidentally started or a programme
in operation being accidentally changed. The child lock function locks all buttons and the
programme knob. The child lock can be activated or deactivated by holding down the LONG
ANTI-CREASE (KNITTERSCHUTZ PLUS) (3) and BUZZER (SIGNAL) (4) buttons simultaneously
for 5 seconds.
Daily use
13
Before programme is started: Appliance cannot be used
After programme is started: Programme in operation cannot be changed
The
icon appears in the display to indicate that the child safety device is activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Starting the programme
Press the START PAUSE button (6). The programme is started.
The programme phase is shown in LCD by appropriate icon:
- drying phase indication
- cooling phase indication
- anti-crease phase indication
During program selection all appropriate phase icons are displayed. When program is star-
ted only current cycle phase is indicated by single icon.
Changing programme
To change a programme which has been selected by mistake once the programme has
started, first turn the programme selector to OFF (AUS) and then reset the programme.
The programme can no longer be changed directly once the programme has started. If
nevertheless there is an attempt to change the programme on the programme knob, the
programme progress display and the maintenance indicators flash. If an option (excluding
the buzzer ) is set, Err appears in the multidisplay. The drying programme is not however
affected by this (laundry protection).
Laundry unloading
Once the drying cycle is complete, display shows a blinking , anti-crease icon appears
on LCD. If the BUZZER (SIGNAL) button (4) has been pressed, an acoustic signal sounds
intermittently for about one minute.
The drying cycles are automatically followed by an anti-crease phase which lasts around
30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose
and free of creases. The laundry can be removed at any time during the anti-crease phase.
(The laundry should be taken out towards the end of the anti-crease phase at the latest to
prevent creases from forming.) If LONG ANTI-CREASE (KNITTERSCHUTZ PLUS)
function
has been selected, the anti-crease phase is lengthened by 60 minutes.
1. Open door.
2. Before removing the laundry, remove fluff from the micro-fine filter. It is best to use
a damp hand for this purpose. (See “Care and cleaning” chapter.)
3. Remove laundry.
4. Turn the programme selector to OFF.
After each drying cycle:
- Clean the micro-fine filter and fine filter
- Drain the condensed water container
14
Daily use
(See chapter “Care and cleaning”.)
5. Close the door.
Care and cleaning
Cleaning fluff filter
The filters collect all the fluff which accumulates during drying. To ensure that the dryer
works perfectly, the fluff filters (micro-fine filter and fine strainer) must be cleaned after
every drying cycle.
The warning icon
is on to remind you of this operation.
CAUTION!
Never operate the dryer without fluff filters or with damaged or blocked fluff filters.
1. Open loading door
2. Use a damp hand to clean the micro-
fine filter, which is built into the lower
part of the loading aperture.
3. After a period of time, a patina due to
detergent residue on laundry forms on
the filters. When this occurs, clean the
filters with warm water using a brush.
Remove the filter from the door pulling
it out. It can be positioned with the tooth
facing to the left or to the right).
After cleaning do not forget to put it
back.
4. Push down unlock button on large mesh
filter.
Large mesh filter jumps up.
Care and cleaning
15
5. Take out fine strainer.
6. Remove fluff from fine strainer. It is best
to use a damp hand for this purpose.
Clean the entire filter area
The strainer area does not have to be
cleaned after every drying cycle, but
should be checked regularly and cleaned
of fluff if necessary.
7. To do this, grip the top of the large mesh
filter and pull it forwards until it comes
loose from the two brackets.
8. Remove fluff from the entire filter area.
It is best to use a vacuum cleaner for this
purpose.
9. Press both journals of the large mesh
filter into the brackets on the loading
door until they snap into place.
10. Re-insert fine strainer.
11. Press against the large mesh filter until
it locks into the interlock.
If the fine strainer is not fitted, the large
mesh filter will not snap into place and the
loading door cannot be closed.
Cleaning the door seal
Wipe the door seal with a damp cloth immediately after the drying cycle has finished.
Emptying the water reservoir
Empty the water reservoir after every drying cycle.
If the water reservoir is full, an active programme will break off automatically and the
empty container
icon on the display will light up. In order to continue the programme,
the water reservoir must first be emptied.
WARNING!
The condensed water is not suitable for drinking or for preparing foodstuffs.
16
Care and cleaning
1. Take out drawer containing condensed
water container completely 1 and pull up
the condensed water container’s drain-
age pipe as far as it will go 2 .
2. Pour condensed water out into a basin or
similar receptacle.
3. Slide outlet connections in and refit water
reservoir.
If the programme has been interrupted as
a result of the water reservoir being full:
Press the START PAUSE button to contin-
ue the drying cycle.
The water reservoir has a volume of approx. 4
litres. This is sufficient for around 7 kg of
laundry which has previously been spun at 1000 revolutions/ minute.
The condensate can be used as distilled water, e.g. for steam ironing. However first filter
the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.
Cleaning heat exchanger filters
If the indicator clean base filters lights up, the heat exchanger fluff filters in the base
of the appliance must be cleaned, i.e. after each 5 drying cycles. Both filters are located in
the appliance base.
Water can collect in the filter housing therefore it is normal for the heat exchanger fluff
filters to become wet.
Never operate the dryer without the fluff filters.
Clogged filters cause higher energy consumption (drying cycle elongation) and dryer
damage.
A dirty heat pump can only be cleaned up by means of a costly process.
1. Open loading door
2. Open door in plinth: To do this, press the
release button on the bottom of the door
aperture and open the door in the plinth
to the left.
1
2
Care and cleaning
17
3. Pull filter housing out of the base by the
handle.
4. To clean the fluff filter: Remove filter
from filter housing. To do this, press the
pressure points on the sides and pull the
filter frame up and out of the housing.
Remove fluff from the fluff filter with a
damp hand.
5. Use a damp hand to remove the fluff from
the filter in the base .
If necessary pull out and clean the filter
with warm water using a wiper or brush.
Clean the inside of the door, the fluff filter
chamber and the rubber seals of fluff.
2
1
18
Care and cleaning
6.
Insert the fluff filter into the base a . Insert
the second fluff filter into the filter hous-
ing (it has to audibly lock) and slide it in-
side the filter chamber b . Close the door
in plinth. Note: If the fluff filter is not in-
serted in the filter housing, the filter hous-
ing cannot be slide into the appliance
base.
7. As necessary, approx. once every 6
months, remove the fluff from the heat
exchanger using the sponge supplied.
When doing this, please use rubber gloves.
Tip: The fluff can be removed more easily if it
is first dampened (e. g. with a laundry damp-
ener) or with the help of vacuum cleaner.
Cleaning the drum
CAUTION!
Do not use abrasives or steel wool to clean the drum.
Lime in the water or cleaning agents may form a barely visible lining on the inside of the
drum. The degree to which the laundry has been dried is then no longer detected reliably.
The laundry is damper than expected when removed from the dryer.
Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the inside of
the drum and drum ribs.
Clean operating screen and housing
CAUTION!
Do not use furniture cleaners or aggressive cleaning agents to clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if ...
Troubleshooting by yourself
Problem
1)
Possible cause Remedy
Dryer does not
work.
Dryer not connected to mains supply.
Plug in at mains socket. Check fuse in
fuse box (domestic installation).
Loading door opened. Close loading door
The START PAUSE button not pressed. Press the START PAUSE button.
Unsatisfacto-
ry drying re-
sults.
Incorrect programme set.
Set suitable programme.
2)
Fluff filters clogged.
Clean fluff filters.
3)
ab
What to do if ...
19
Heat exchanger clogged.
Clean heat exchanger.
3)
Max. loading exceeded. Respect max. loading volume.
Covered ventilation grill. Uncover ventilation grill in base area.
Residue inside the drum. Clean the drum inside.
High water hardness.
Set suitable water hardness
4)
.
Loading door
does not close
Filters not locked in place.
Install fine filter and/or snap course fil-
ter into place.
Err
( Error ) on
the LCD.
5)
Attempt to change parameters after
start of the programme.
Turn the dryer off and on. Set requested
parameters.
No drum light
Programme selector in OFF position.
Turn it to DRUM LIGHT (if available) or
to any programme.
Defective light bulb. Replace light bulb (see next section).
Abnormally
elapsing time
on the LCD
5)
Time to end is calculated on the basis
of: type, volume and dampness of laun-
dry.
Automatic process; this is not a ma-
chine fault.
Programme
inactive
Full water reservoir.
Empty water reservoir
3)
, press START
PAUSE button.
Drying cycle
to short
Small laundry volume./Too dry laundry
for selected programme.
Select time programme or higher drying
level (e.g. EXTRA DRY).
Drying cycle
to long
6)
Fluff filters clogged. Clean fluff filters.
To high loading volume. Respect max. loading volume.
Laundry insufficiently spun. Spun adequately the laundry.
Particularly high room temperature -
no machine fault.
Lower the room temperature if possible.
1) In case of error message on the LCD (e.g.
E51
- only dryers with the LCD): Switch the dryer off and on. Set
programme. Press the START PAUSE button. Does not work? - inform local service and quote the error code.
2) follow program recommendation - see Programme overview chapter
3) see Care and cleaning chapter
4) see Machine settings chapter
5) only dryers with the LCD
6) Note: After around 5 hours the drying cycle ends automatically (see Drying cycle complete section).
Changing the bulb for interior lighting
Only use a special bulb which is designed specially for dryers. The special bulb can be
obtained from your local service centre.
When the appliance is switched on, the interior lighting switches itself off after 4 minutes
when the door is open.
WARNING!
Do not use standard bulbs! These develop too much heat and may damage the machine!
Before replacing the bulb, disconnect the mains plug; with a permanent connection: fully
unscrew or deactivate the fuse.
20
What to do if ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Aeg-Electrolux T8030TW Manuale utente

Categoria
Asciugatrici
Tipo
Manuale utente

in altre lingue