Siemens Cell Phone A40 Manuale utente
- Categoria
- Cellulari
- Tipo
- Manuale utente
Questo manuale è adatto anche per
Issued by
Information and Communication mobile
Haidenauplatz 1
81667 München
© Siemens AG 2001
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
http://www.my-siemens.com
Ref.No.: A31008-H4400-A1-1-7619
*A5B00025205508*
s
User Guide
A40
For more comfort and efficiency, use Siemens
Original Accessories, these also enable safe
use whilst driving. Non Original Accessories
can damage your phone.
QR_A40-en 12.03.2001 13:18 Uhr Seite 1
1
07.05.2001 b35_enIVZ.fm A40 englisch A31008-H4400-A1-1-7619
Contents
Overview ............................................. 2
Safety................................................... 3
Introduction ........................................ 4
Icons Used ....................................... 4
Icons on the Display......................... 4
Menu Control ...................................... 5
Getting Started................................... 6
1. Insert CLIPit Folio ......................... 6
2. Insert SIM Card ............................ 6
3. Insert and Charge Battery ............ 7
4. Switch Telephone On................... 7
5. Emergency Call ............................ 7
6. Enter PIN ...................................... 8
7. Standby Mode.............................. 8
8. Switch Telephone Off .................. 8
Making Calls........................................ 9
Dialling with the Keypad................... 9
Ending Calls...................................... 9
International Number........................ 9
Redialling........................................ 10
Answering Calls.............................. 10
Unwanted Calls .............................. 10
Active Number ............................... 10
Phonebook ........................................ 11
Saving Numbers ............................. 11
Calling from Phonebook ................. 12
Phonebook Menu ........................... 12
Saving the Tone Sequence............. 13
Fast access dialling .......................... 14
During a Call...................................... 15
Changing the Volume..................... 15
Time/Units...................................... 15
Call Waiting .................................... 15
Answering Calls.............................. 15
Rejecting Calls................................ 15
Conducting a Second Call............... 15
Text Messages (SMS) ...................... 16
Reading New Messages ................ 16
Writing and Sending Messages ..... 17
Message Lists ................................ 18
Replying to Messages.................... 19
Displaying Capacity ........................ 19
Setting the Service No. .................. 19
CB Cell Broadcast ............................. 20
CB Setup ........................................ 20
Reading Cell Broadcast Messages. 20
Voice Mail ......................................... 21
Configuring Voice Mail ................... 21
Hearing Voice Mail ......................... 22
Applications ...................................... 23
Missed Calls ...................................... 24
Ringers/Melodies.............................. 25
Switching the Ringer On/Off .......... 25
Setting the Ringer Volume ............. 25
Setting the Melody......................... 25
Switching Service Tones On/Off .... 25
Switching CB Tones On/Off ........... 25
Key Sound ...................................... 25
Switching All Tones On/Off............ 26
Switching the
Silent (Vibrating) Alert On/Off......... 26
Setup ................................................. 27
Language........................................ 27
Time ............................................... 27
Charges .......................................... 27
Divert.............................................. 28
Security .......................................... 29
GSM Services................................. 30
Car Use........................................... 31
Troubleshooting ............................... 32
Data.................................................... 34
Licensing ........................................ 34
Technical Data ................................ 34
Care of Phone................................. 34
Care of Your SIM Card ................... 34
Accessories ....................................... 35
Basics............................................. 35
Car Solution .................................... 35
Further information......................... 36
GSM Network Control Codes.......... 37
International Service
Numbers (Hotline) ............................ 38
Index .................................................. 39
2
07.05.2001 B35_01_over.fm A40 englisch A31008-H4400-A1-1-7619
Overview
A 40
8
9
0
abc
def
ghi
jkl
mno
pqrs
tuv
w
xyz
B
J
<Network Provider>
17:35 [Menu]
Reception strength
Navigation key
Scroll through menus
and lists.
Open the Phonebook in
standby.
Adjust volume during call.
Call key
Answer calls.
Dial displayed number or
name.
Correction key
Delete characters or
words.
Ringer On/Off
Hold down:
Switch ringer on/off.
Battery level
Menu
Set the telephone and
network functions.
Softkey
Execute the function
shown on the display
(see note below).
On, Off, Disconnect key
•
Long press:
Switch telephone on/
off (from standby).
Skip back to standby.
•
Short press:
End call,
Return to a higher
menu level as far as
standby.
International code
(
¼
p. 9)
>
Note: Softkeys
The function currently active is indicated by a text on
the display. In order to execute the function displayed,
you must press the so-called softkey
>
on the key-
pad.
To call up the Main Menu in this example, press
>
.
J
<Network Provider>
17:35 [Menu]
Key lock
Hold down:
Lock on/off.
Protects the keys from
being activated inadvert-
ently.
3
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Safety
All radio transmitters are subject to
restrictions such as:
Switch off in hospitals and in the vi-
cinity of medical devices, e.g. pace-
makers or hearing aids. Mobile
phones can interfere with the func-
tion of these devices.
Always use the handsfree kit for calls
while driving
(Accessories,
¼
p. 35).
Mobile phones must be switched off
at all times in an aircraft. Prevent ac-
cidental activation.
Switch off near petrol stations, fuel
depots, chemical plants or blasting
operations. Mobile phones can inter-
fere with the operation of technical
installations.
The ring tone is reproduced through
the earpiece. To avoid damage to
hearing, first accept the call, then
hold the phone to the ear.
SIM card may be removed. Caution:
small parts could be swallowed by
children.
The mains voltage specified on the
power supply unit must not be ex-
ceeded.
We recommend you use only original
Siemens batteries (100% mercury-
free) and charging devices. Other-
wise considerable health risks and
damage to the product cannot be ex-
cluded.
Please note:
Package Contents
• A40 telephone
• User guide
• NiMH battery
• Power supply unit
• CLIPit folio set
Neither the phone nor the battery
(100% mercury-free) may be opened
under any circumstances. Changes
to this device are strictly prohibited,
as they will invalidate the type ap-
proval criteria required for operation
of the unit.
Dispose of used batteries according
to the legal regulations.
Mobile phones can interfere with the
operation of nearby TVs, radios, PCs.
We recommend you use only original
Siemens accessories to avoid possi-
ble damage and to comply with the
existing regulations.
Improper use invalidates the
warranty!
4
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Introduction
Icons Used
The following icons appear in the User
Guide:
F
Use the keypad to write
numbers or letters.
*
Navigation key
N
To scroll, press the key at
the right or left as indicated.
>
Use the softkey for the func-
tion displayed above.
?
Correction key:
Press briefly to clear the last
character, hold down to
clear the word or the
number.
:
Call key
8
On/Off/Disconnect key
Network-dependent fea-
ture. Not available from all
network providers.
[OK]
Bold text indicates
a displayed function
which is executed using
the corresponding key.
<
Text
>
Variable text
Operating step performed
by the user, e.g. scroll
through the menu, select a
menu item.
,
Icons on the Display
The most important display icons:
Status/Events
2
Local network area
6
New text message, new voice mail,
new missed call.
5
All calls diverted.
/
Ringer off
H
Key lock
G
Set up connection
I
Connection set up
Incoming call
Network access barred
Restricted network connection -
emergency calls OK
@
No encryption (network-dependent)
$
Action successfully executed, On
A
Action not executed, Off
/
Active line (number)
Menu Icons
6
Event
+
SIM applications
%
Phonebook
,
Text messages
P
Missed calls
&
Voice mails
=
Ringers/melodies
Extras
5
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Menu Control
Example:
Setting the Language in standby
Step 1: Open the menu
Press
>
to call up the
[Menu]
.
Step 2: Scroll through menu
Use the
*
key to scroll
between the main menu
items (e.g. to
Setup
).
Step 3: Confirm selection
Select the
Setup
main menu
item by pressing the
>
key.
Step 4: Scroll through submenu
Press
*
to scroll to
Lan-
guage
submenu.
RJ
<Network provider>
11:35 [Menu]
RJ
Setup
[Select]
RJ
Language
[Select]
Step 5: Confirm selection
Select the
Language
sub-
menu item with the
>
key.
Step 6: Open the menu
Select the
Language
sub-
menu item with the
>
key.
Step 7: Scroll through submenu
Press
*
to scroll be-
tween the menu items
(e.g. to
English
).
Step 8: Confirm selection
Confirm your selection by
pressing the
>
key.
Step 9: Back
8
Holding
this key
down
brings you to standby mode.
8
Pressing briefly
takes you
back one menu level.
RJ
Language
[Select]
RJ
<Language>
[Change]
RJ
English
[Select]
6
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Getting Started
1. Insert CLIPit Folio
• Remove transparent CLIPit as
shown.
• Insert CLIPit folio as shown. Make
sure the retaining clips are correctly
positioned.
• Then replace transparent CLIPit.
2. Insert SIM Card
Your service provider will supply you
with a SIM card, which stores informa-
tion regarding your connection and bill-
ing details.
"Care of Your SIM Card",
¼
p. 34.
Additional folio designs are available
on the Internet (please refer to the at-
tached CLIPit folios for the address).
Older SIM cards are only compatible if
they are 3 V mini SIM cards.
Contact your service provider if you
have any questions or problems.
A 40
8
0
jk
l
t
u
v
ghi
p
q
r
s
9
d
e
f
m
n
o
w
x
y
z
a
b
c
A 40
d
e
a
b
c
A 40
d
a
b
c
7
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Getting Started
3. Insert and Charge
Battery
To Insert the Battery
• Insert the battery as indicated below
(contacts on top end).
• Refit the cover, ensure the top end
is flush before pressing it closed
(until it clicks).
To Charge the Battery:
Your new battery will not be fully
charged:
• Insert the plug into the charger into
the socket in the phone
(see illustration below).
• Plug the charging unit into the mains
power socket (first checking the rat-
ed voltage of the charging unit).
K
The charging progress is shown
on your display. You may use
your phone whilst charging.
J
Charging complete.
Battery is fully charged.
• To release, squeeze the arrows on
the plug together and remove.
.
4. Switch Telephone On
8
Hold down to switch on.
If
Insert SIM Card
is displayed, check
that the SIM card is correctly inserted
(
¼
p. 32).
5. Emergency Call
You can contact the emergency servic-
es at any time even without a SIM
card. Simply dial 112 (999 in the UK).
Charging Time
Allow at least 3 hours for your first
few charges. 1.5 - 2 hours are enough
after this.
Usage Time
A full charge can provide from 60 to
150 hours standby, or from 90 to 240
minutes talk time (depending on use
and network conditions).
A beep sounds when the battery
needs charging.
8
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Getting Started
6. Enter PIN
Your SIM card is provided with a PIN to
prevent misuse:
F
Enter the PIN.
The display is suppressed
(You can correct mistakes
using
?
).
Press
>
.
It may take a few seconds to register
your phone with the network.
7. Standby Mode
If the name of the network provider is
displayed, the telephone is on standby:
You can now make calls, answer calls
and use the other telephone functions.
PIN
The SIM card will be blocked after the
third incorrect PIN entry (
¼
p. 32).
To switch on/off PIN control or to
change your PIN number (
¼
p. 29).
J
Please enter PIN:
**** [OK]
J
<Network Provider>
11:35 [Menu]
If the Date/Time function is on
(
¼
p. 27), you will see the time dis-
played.
B
Strong reception signal.
D
If the signal is weak, call
quality or continuity may be
impaired.
You can normally improve reception by
moving to a window or open space.
If you are outside your "home" network
(
¼
p. 30) or abroad, your phone will au-
tomatically select another GSM net-
work (
¼
p. 30). Your network provider
may restrict the selection of another
network (
¼
p. 30).
Key Lock
Activating the key lock prevents keys
being pressed inadvertently.
Hold down.
The key lock is activated. Any key can
now be pressed without a function be-
ing executed.
Deactivating the key lock:
Hold down.
8. Switch Telephone Off
8
Hold down
(in standby mode).
9
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Making Calls
Dialling with the Keypad
The telephone must be switched on
(standby).
F
Always enter the number
with the area code (where
applicable with the interna-
tional code).
You can use the
?
key to correct any
mistakes.
:
Press. The number dis-
played is dialled.
You can use the
[Save]
function to store
the number in your Phonebook
(
¼
p. 11).
Ending Calls
8
Press.
Press this key even if the
other party hangs up first.
The call is ended.
For easier, quicker, error-free use you
can:
• Redial numbers.
• Use the Phonebook (
¼
p. 12).
• Use speed dialling (
¼
p. 14).
• Dial numbers in messages
(
¼
p. 16).
RJ
089987654321
[Save]
International Number
An international number comprises the
international prefix, the country code
(e.g. 49 for Germany) and the national
number (often without the first digit):
Hold down until "+" appears.
F
Enter the country code and
number.
:
Press.
10
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Making Calls
Redialling
The last numbers dialled are stored
(max. ten, depending on your SIM
card).
:
Press.
A list is opened of the last numbers
dialled.
N
Scroll to the required
number.
:
Press. The number dis-
played is dialled.
Processing Lists
You can save an entry to a list or delete
the list.
:
Press.
N
Scroll to the required entry.
[Options]
Press.
N
Scroll to the required option.
[Select]
Press to save an entry to a
list or delete the list.
,
Answering Calls
In certain cases, the caller’s name or
number is displayed (
¼
p. 11).
:
Press.
Unwanted Calls
You can reject unwanted calls. If you
receive a call:
8
Press. The caller hears the
busy tone.
or
[Busy]
Press.
Divert is on
appears if call diversion is
activated (
¼
p. 28).
Active Number
When an alternative number is regis-
tered for the telephone it is possible to
switch between numbers in standby
mode:
Press.
Line
/
Press to switch the line.
,
11
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Phonebook
You can enter frequently dialled num-
bers along with the associated names
in the Phonebook, enabling you to dial
quickly and without errors.
If caller number transmission is activat-
ed, the name of the caller is shown on
the display, providing there is a corre-
sponding entry in the Phonebook.
Saving Numbers
When you are in standby mode you
can make a new entry:
F
Always enter the number
with the area code.
For frequent travel abroad,
enter the international code
(
¼
p. 9).
[Save]
Save entry.
F
Enter the name that belongs
to the number (see below).
Press
>
to confirm your
entry.
8
Return to standby mode to
enter another number.
or
:
Dial the number.
A number can consist of up to 20
characters.
Up to 250 Phonebook entries can be
made, depending on the SIM card.
RJ
Ann Andrews
[OK]
Writing Names
Press the digit keys repeatedly until
the character you want appears. The
cursor advances after a short delay.
Press once briefly for A,
twice for B, etc.
?
Press briefly to erase the
character preceding the cur-
sor, hold down to erase the
whole word.
Press to switch between
upper and lower case letters
(only applies to the adjacent
character). The first charac-
ter is written in upper case
as standard.
Press to create a space.
1/Ä Numbers and letters with
accents appear after letters.
*
Press briefly to move the
cursor from character to
character. Hold down to
move from word to word.
Entering Other Characters
These keys are used for punctuation,
common icons and Greek characters.
Available characters (
¼
p. 18).
You may enter a range of numbers for
the same person, e.g.:
• Ann O (Office)
• Ann H (Home)
The entries are sorted alphabetically,
however only the first six letters of
each name are taken into account.
12
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Phonebook
Calling from Phonebook
You can access the Phonebook directly
from standby mode (
¼
p. 5):
N
Press to open the Phone-
book.
F
/
*
Select a name by entering
the first letter and/or
scrolling.
:
Press.
Phonebook Menu
Own Number
The first entry in the Phonebook is re-
served for your own phone number.
This means that you can display your
own number at any time.
You cannot dial this number. If your
number is not already entered, you can
do this as follows:
[Menu]
Phonebook
<Own number>
[Set]
Press.
F
Enter the number.
[OK]
Confirm entry.
Alternative Line
If your SIM provides an alternative line
(
Line
), you can view or set the sec-
ond number.
RJ
Ann Andrews
[Options]
,
New Entry
[Menu]
Phonebook
<New entry>
F
Always enter the number
with the area code.
For frequent travel abroad,
enter the international code
(
¼
p. 9).
[OK]
Confirm entry.
F
Enter the name.
[OK]
Confirm entry.
Edit Phonebook Entry
Several options are available for each
displayed entry:
[Menu]
Phonebook
<Entry>
[Options]
View entry
Edit entry
The number is displayed with a flash-
ing cursor:
?
/
F
Alter the number.
[OK]
Confirm changes and repeat
for entering the name.
Delete entry
Clear Phonebook
Capacity
The memory available on the SIM card
is displayed.
13
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Phonebook
Saving the Tone
Sequence
You can save your numbers in your
Phonebook together with tone se-
quences (digits), e.g. for remote reply
of an answering machine.
F
Enter the number.
Hold down until a “+” ap-
pears (pause during connec-
tion setup).
F
Enter the digits.
If necessary insert more
pauses to ensure that the
numbers are processed se-
curely on the receiver side.
Sending a Tone Sequence
A tone sequence can be entered man-
ually after a connection has been set
up:
F
Enter the numbers for the
tone sequence.
Service numbers
Your service provider can equip your
SIM card with service numbers. If this
case, you will see
<Service numbers>
as
an entry in your Phonebook.
[Menu]
Phonebook
<Service numbers>
*
Scroll to the required service
number.
:
Press. The number is di-
alled.
,
Information Numbers
Your service provider can equip your
SIM card with information numbers.
These numbers can be stored together
in directories (e.g. hotels, weather).
The numbers or directories are auto-
matically available as entries in the
Phonebook.
If
appears beside an entry, it can on-
ly be dialled in the local network.
Dialling Information Numbers
[Menu]
Phonebook
<Info Numbers>
*
Scroll to the required
directory.
[Select]
Press to open the directory.
*
Scroll to the required entry.
:
Press. The number is di-
alled.
Active Line
[Menu]
Phonebook
<Active Line>
The line is active in the following exam-
ple. You can switch to
Line
.
Press
>
to switch to
[Line
]
in this example.
,
,
RJ
<Active Line>
[Line
]
14
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Fast access dialling
To accelerate dialling, you can define
speed dialling numbers for the entries
in your Phonebook. You can use the
digit keys 2 - 9 for this purpose.
Assigning Speed Dialling
Numbers
This is how to allocate a speed dialling
number (in this case 3):
Press.
[Set]
Press to open the Phone-
book.
N
Scroll to the required entry.
[Select]
Confirm.
The speed dialling number (in this
case 3) is linked with the selected
Phonebook entry.
Making Calls using Speed
Dialling Numbers
Enter the speed dialling
number.
The Phonebook entry corresponding to
the speed dialling number is displayed.
:
Press. The number is dialled
and the connection is set up.
Only the first six characters of a name
can be displayed.
The number for checking the mailbox
is assigned to the digit key
.
RJ
3
[Ann An...]
Next Speed Dialling Number
Press
>
.
*
Scroll to the required speed
dialling number.
:
Press. The number is dialled
and the connection is set up.
Changing Speed Dialling Numbers
You can change a speed dialling
number.
Press
>
.
The Phonebook entry and correspond-
ing speed dialling number are dis-
played.
Twice in succession:
[Reset]
Press.
Assign a new speed dialling number
(see above).
RJ
3
[Ann An...]
RJ
Ann Andrews
< 3 > [Reset]
RJ
3
[Ann An...]
15
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
During a Call
Changing the Volume
You can set the handset volume while
a call is in progress. There are
five volume settings.
*
Press to change the volume.
Time/Units
The call duration or the units are dis-
played during and after a call (
¼
p. 27).
Call Waiting
If someone calls you while you are on a
call, you will hear a Call Waiting signal.
Answering Calls
:
Press.
The first call is placed on hold and the
new call is answered. You can now
toggle back and forth between the two
calls (swap).
Press
>
to swap.
If may be necessary to apply to your
service provider to have this function
enable. To activate/deactivate Call
Waiting or to check the status of the
function (
¼
p. 37).
RJ
0172987654321
I
[Menu]
,
,
RJ
I
+491729876
I
[Swap]
Rejecting Calls
You can reject a new call:
8
Press.
If you have activated Divert to the mail-
box, then the call is diverted.
Conducting
a Second Call
You are on a call and make a call to a
second subscriber.
F
Enter the number.
or
[Menu]
Press and select entry from
Phonebook.
:
Press. The connection is
set up.
In both cases the current call is put on
hold and the new call is set up. You can
swap between the two calls.
Press
>
to swap.
Ending a Connection
8
Press.
[OK]
Confirm the prompt. You re-
turn to the call on hold.
,
RJ
I
+491729876
I
[Swap]
16
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Text Messages (SMS)
Your phone can receive and send text
messages (Short Message Service,
SMS). Your service provider will advise
you concerning service availability and
operation.
Reading New Messages
A
new
text message is indicated by the
following icon
6
:
To read the message:
[Menu]
Events
New Message
The display indicates the date and time
at which the message was received.
N
Scroll to read the number
and the message.
The end of the message is indicated by
a mark.
When you have read the message you
will be asked if you want to delete this
message.You should delete messages
regularly as the capacity of your SIM
card is limited (see below).
N
Once you have read the
message scroll to the next
one.
:
Press to dial a selected
number in the text mes-
sage (
`
08998765432
_
).
R6 J
<Network Provider>
[Menu]
Options While Reading
You can access the following functions
when reading a message:
[Options]
Press.
*
Scroll to the required func-
tion and then:
[Select]
Press to execute a function.
Call active no.
Save active no.
Saves the number in your Phonebook.
Reply to sender
Sends a reply to the originator.
Edit Message
Edits the received message.
Can also be used to enter a new ad-
dress.
Delete Message
[Delete]
Press to confirm the securi-
ty prompt.
6
Flashes when the mes-
sage memory is full. You
cannot receive any more
messages when the
memory is full.
17
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Text Messages (SMS)
Writing and Sending
Messages
You can create text message contain-
ing up to 160 characters.
To send a text message, this must first
be forwarded to the Service Centre.
The number of your Service Centre is
usually preset. Otherwise you must
enter this manually (
¼
p. 19). The
Service Centre number is available
from your service provider.
[Menu]
Messages
Create Message
F
Enter the message text.
(See the box below for writ-
ing text).
After entering the message text:
[Options]
Select.
[Select]
Confirm the prompt for
sending the text message.
F
/
%
Enter the number or dial
from the Phonebook.
Send Message
Confirm.
or
:
Press to send.
You are advised when your message
has been sent, then you can save it.
It will appear in your sent message
list.
Writing Text
Press the digit keys repeatedly until
the character you want appears. The
cursor advances after a short delay.
Press once briefly for A, twice
for B, etc.
?
Press briefly to erase the char-
acter preceding the cursor,
hold down to erase the whole
word.
Press to switch between up-
per case and lower case let-
ters. The first character is writ-
ten in upper case as standard.
Press to create a space.
1/Ä Numbers and letters with ac-
cents appear after letters.
*
Press briefly to move the cur-
sor from character to charac-
ter. Hold down to move from
word to word.
Space 1
Q
£ $ ¥
Aa Bb Cc 2 Ää Çà
Dd Ee Ff 3 Éé è
Gg Hh Ii 4 ì
Jj Kk Ll 5
Mm Nn Oo 6 Öö ñ ò
Pp Qq Rr Ss 7 ß
Tt Uu Vv 8 Üü ù
Ww Xx Yy Zz 9 Ææ Øø Åå
A - a * / ( ) < = >
% ¤
+ 0 - . , : ? ¿
! ¡ " ‘ ; _
# @ & §
Γ ∆ θ Λ
Ξ Π Σ Φ Ψ Ω
18
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Text Messages (SMS)
Options While Writing
When writing a message, other func-
tions are available in addition to the
send function:
Save message
Saves the message.
Insert from:
%
Opens the Phonebook to select a
number.
Insert new line
Begins a new paragraph.
Discard message
Delete the text input.
[Options]
Press.
*
Scroll to the required func-
tion and then:
[Select]
Press to execute the re-
quired function.
Info
If the message could not be sent, you
are given the option of repeating the
action. If the send action fails again,
check that your Service Centre
number is correctly set (
¼
p. 19).
Note that “Message sent!” means
that the message has only been re-
ceived by your Service Centre. It will
then try to send it on to the recipient
within a certain period of time.
Message Lists
Your messages are saved in an incom-
ing or outgoing list.
Inbox
In the incoming list, there are several
options when a message is displayed:
New Message
[Menu]
Messages
Incoming List
<Select Message>
Read Message
Read
new
message.
*
Scroll through the message.
For editing options when reading
(
¼
p. 16).
Old Messages
[Menu]
Messages
Incoming List
<Select Message>
[Options]
Read Message
Read
old
message.
*
Scroll through the message.
For editing options when reading
(
¼
p. 16).
Edit Message
For information on procedure, see the
section on "Options While Writing",
¼
p. 18.
Delete Message
[Delete]
Press.
Confirm security prompt.
19
07.05.2001 B35_02_main.f A40 englisch A31008-H4400-A1-1-7619
Text Messages (SMS)
Outbox
If you select a sent message in the out-
going list, the text is displayed.
If you select an unsent message which
contains a number, the number is dis-
played.
The following options are available:
[Menu]
Messages
Outgoing List
<Select Messages>
[Options]
Read Message
Read message.
*
Scroll through the message.
Edit Message
For information on procedure, see
"Options While Writing" (
¼
p. 18).
Delete Message
(
¼
p. 16)
[Delete]
Press.
Confirm security prompt.
You have the following options when
reading a text message:
[Options]
Press.
*
Scroll to the required func-
tion and then:
[Select]
Press to execute a function.
Call active no.
Save active no.
Send Message
Edit Message
Delete Message
Replying to Messages
A received message can be read as fol-
lows:
[Options]
Press.
N
Scroll to the
Reply to sender
option.
[Select]
Press.
Here you can edit a message and then
send it (
¼
p. 17).
Displaying Capacity
[Menu]
Messages
Capacity
The amount of occupied and free stor-
age space for messages on the SIM
card is displayed.
Setting the Service No.
This is where you enter the number of
the Service Center. If this number is
not already contained on the SIM card,
you can obtain it from your service pro-
vider.
[Menu]
Messages
Set Serv. Center
F
Enter the number.
[OK]
Confirm entry.
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
La pagina sta caricando ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
Siemens Cell Phone A40 Manuale utente
- Categoria
- Cellulari
- Tipo
- Manuale utente
- Questo manuale è adatto anche per
in altre lingue
- English: Siemens Cell Phone A40 User manual
Documenti correlati
-
Siemens SSA911.02ZB Guida utente
-
-
-
-
Siemens Cell Phone A65 Manuale utente
-
-
-
-