Moog Videolarm FDW75CF2 Installation And Operation Instructions Manual

Categoria
Custodie per telecamere
Tipo
Installation And Operation Instructions Manual

Questo manuale è adatto anche per

www.videolarm.com
F D W 7 5 C F 2 N
Fixed Camera Fusion Dome (Outdoor/ Indoor Wall Mount with Housing)
Installation and Operation Instructions for the following models:
FDW75CF2N IP Network Ready 7” Outdoor dome housing with wall mount, clear dome,
with 24VAC input, heater/blower, for an IP Network xed camera, 120 to
24VAC transformer
FDW75TF2N IP Network Ready 7” Outdoor dome housing with wall mount,tinted dome, with
24VAC input, heater/blower, for an IP Network xed camera, 120 to
24VAC transformer
IFDP75CF2N IP Network Ready 7” Indoor dome housing with pendent mount, clear dome
with 24VAC input, heater/blower, for an IP Network xed camera, 120 to
24VAC transformer
FDW75CF2 Outdoor dome housing with wall mount, clear dome with 24VAC input,
heater/blower, xed camera bracket
IFDW7CF Indoor dome housing with wall mount, xed camera bracket
Before attempting to connect or operate this product, please read these instructions completely.
81-IN5359
01-31-2012
© 2011, Moog Videolarm, Inc. All Rights Reserved
IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS
UNPACKING
SERVICE
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with damp cloth.
7 Do not block any of the ventilation openings. Install in accordance with the
manufacturers instructions.
8 Cable Runs- All cable runs must be within permissible distance.
9 Mounting - This unit must be properly and securely mounted to a supporting
structure capable of sustaining the weight of the unit.
Accordingly:
a. The installation should be made by a qualied installer.
b. The installation should be in compliance with local codes.
c. Care should be exercised to select suitable hardware to install the unit, taking into
account both the composition of the mounting surface and the weight of the unit.
10 Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus ( including ampliers) that produce heat.
11 Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. When the provided plug does not t into your
outlet, consult an electrician for replacement of the obsolete outlet.
12 Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
13 Only use attachment/ accessories specied by the manufacturer.
14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
15 Unplug this apparatus during lighting storms or when unused for long periods of time.
16 Refer all servicing to qualied service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled of objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
Be sure to periodically examine the unit and the supporting structure to make sure that the integrity
of the installation is intact. Failure to comply with the foregoing could result in the unit separating
from the support structure and falling, with resultant damages or injury to anyone or anything struck
by the falling unit.
Unpack carefully. Electronic components can be
damaged if improperly handled or dropped. If an item
appears to have been damaged in shipment, replace
it properly in its carton and notify the shipper.
Be sure to save:
1 The shipping carton and packaging material.
They are the safest material in which to make future
shipments of the equipment.
2 These Installation and Operating Instructions.
If technical support or service is needed, contact us at
the following number:
The lightning ash with an arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of non-insulated
“dangerous voltage” within the product’s
enclosure that may be of sufcient magnitude
to constitute a risk to persons.
Este símbolo se piensa para alertar al usuario a la presencia
del “voltaje peligroso no-aisIado” dentro del recinto de los
productos que puede ser un riesgo de choque eléctrico.
Ce symbole est prévu pour alerter I’utilisateur à la presence
“de la tension dangereuse” non-isolée dans la clôture de
produits qui peut être un risque de choc électrique.
Dieses Symbol soll den Benutzer zum Vorhandensein der
nicht-lsolier “Gefährdungsspannung” innerhalb der
Produkteinschließung alarmieren die eine Gefahr des
elektrischen Schlages sein kann.
Este símbolo é pretendido alertar o usuário à presença “di
tensão perigosa non-isolada” dentro do cerco dos produtos
que pode ser um risco de choque elétrico.
Questo simbolo è inteso per avvertire I’utente alla presenza
“di tensione pericolosa” non-isolata all’interno della
recinzione dei prodotti che può essere un rischio di scossa
elettrica
.
The exclamation point within an equilateral
triangle is intended to alert the user to
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Este símbolo del punto del exclamation se piensa para
alertar al usuario a la presencia de instrucciones importantes
en la literatura que acompaña la aplicación.
Ce symbole de point d’exclamation est prévu pour alerter
l’utilisateur à la presence des instructions importantes dans
la littérature accompagnant l’appareil.
Dieses Ausruf Punktsymbol soll den Benutzer zum
Vorhandensein de wichtigen Anweisungen in der Literatur
alarmieren, die das Gerät begleitet.
Este símbolo do ponto do exclamation é pretendido alertar o
usuário à presença de instruções importantes na literatura
que acompanha o dispositivo.
Questo simbolo del punto del exclamaton è inteso per
avvertire l’utente alla presenza delle istruzioni importanti nella
letteratura che accompagna l'apparecchio.
TECHNICAL SUPPORT
AVAILABLE 24 HOURS
1- 800 - 554 -1124
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER ( OR BACK). NO USER- SERVICE-
ABLE PARTS INSIDE. REFER SEVICING
TO QUALIFIED SERVICE PERSONNEL.
Limited Warranty for Moog Videolarm Products
Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:
PRODUCT CATEGORY PARTS \ LABOR
All Enclosures and Electronics* Five (5) Years
Poles/PolEvators/CamEvator Three (3) Years
Warrior Series™/Q-View™/IR Illuminators Five (5) Years
SView Series™ Five (5) Years **6 months if used in auto scan/tour operation
Controllers Five (5) Years
Power Supplies Five (5) Years
EcoKit Three (3) Years
Accessory Brackets Five (5) Years
Liberty Dome Three (3) Years
*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation
During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm
Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with
a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support
Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to
provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or
parts charges.
The limited warranty stated in these product instructions is subject to all of the following terms and conditions.
TERMS AND CONDITIONS
1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an
explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.
If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of
investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period
of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that
part or the remaining period of the Product parts warranty, whichever is greater.
2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any
Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.
3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the
warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,
earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance
procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the
Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts
(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the
published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,
or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not
been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”
(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any
cost associated with removal of defective product and installation of replacement product is not included in this warranty.
4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.
DISCLAIMER OF WARRANTY
EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR
ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL
CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT
THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS
PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.
LIMITATION OF LIABILITY
THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND
WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL
PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER
FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,
REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.
FDW75F2N
24 VAC
26 Watts
Accessories: Heater: 25 Watts, Blower: 1 Watt
Camera Power: 26 Watts Max
Tools Required: .100” Flat Head Screwdriver
Phillips Head Screwdriver
24 VAC
26 vatios
Accesorios: Calentador: 25 Vatios, Soplador: 1 vatio
Energía De la Cámara fotográfica: 26 vatios Max
Las Herramientas Requirieron: Destornillador Principal Plano Del
100". Destornillador Principal Phillips.
24 VCA
26 watts
Accessoires : Réchauffeur : 25 Watts, Ventilateur : 1 watt
Puissance D'Appareil-photo : 26 watts Max
Les Outils Ont exigé : Tournevis Principal Plat De 100".
Tournevis Principal Phillips.
24 VAC
26 Watt
Zusatzgeräte: Heizung: 25 Watt, Gebläse: 1 Watt.
Kamera-Energie: 26 Watt Max
Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher.
Kreuzkopfhauptschraubenzieher.
24 VAC
26 watts
Acessórios: Calefator: 25 Watts, Ventilador: 1 watt.
Poder Da Câmera: 26 watts Max
Ferramentas Requeridas: Chave de fenda Principal Lisa Do
100". Chave de fenda Principal Phillips.
24 VCA.
26 watt
Accessori: Riscaldatore: 25 Watt, Ventilatore: 1 watt.
Alimentazione Della Macchina fotografica: 26 watt Max
Gli Attrezzi Hanno richiesto: Cacciavite Capo Piano Del 100".
Cacciavite Capo "phillips".
Electrical Specifications
IFDP75CFN
FDW75CFN (INDOOR ONLY)
Power 24VAC
Class 2 Only
24 VAC
No power options provided.
Power required for camera only.
24 VAC
Ningunas opciones de la energía proporcionaron.
Energía requerida para la cámara fotográfica solamente.
24 VCA
Option de puissance n'a pas fourni.
Puissance requise pour l'appareil-photo seulement.
24 VAC
Keine Energie Wahlen stellten zur Verfügung.
Energie erfordert für nur Kamera.
24 VAC
Nenhumas opções do poder fornecidas.
Poder requerido para a câmera somente.
24 VAC
Nessun'opzione di alimentazione ha fornito.
Alimentazione richiesta per la macchina fotografica soltanto.
!!
Indoor Models IFDP75CN/ IFDP75CN Include NO Power
Accessories
International Models FDW75C2NE/ FDP75C2NE Include NO
Power Transformer
!!
Français
Deutsch
Italiano
Portuguese
Español
English
Contents of Box
A
B
*
* NOT included with E or 12V models
Pendent Model
(ONLY)
* Not included with E , 12V or non-network models
Bracket is designed for 45° conduit tting (If using the
conduit). Run wire into bracket, secure to wall.
El soporte se diseña para la guarnición del conducto 45° (si usa el
conducto). Funcione con el alambre en el soporte seguro para
emparedar.
La parenthèse est conçue pour l'ajustage de précision du conduit 45° (si
à l'aide du conduit). Courez le l dans la parenthèse bloquée pour murer.
Haltewinkel ist für Befestigung des Rohres 45° bestimmt (wenn das Rohr
verwendet wird). Lassen Sie Draht in den Haltewinkel laufen, der, um zu
ummauern sicher ist.
O suporte é projetado para o encaixe da canalização 45° (se usando a
canalização). Funcione o o no suporte seguro para murar.
La staffa è progettata per il montaggio del condotto 45° (se per mezzo
del condotto). Faccia funzionare il legare nella staffa sicura per murare.
Trim incoming control & power wires to 4”- 5”,
for either wall or pendent bracket.
& entrante del control del ajuste; accione los alambres a 4” - 5”, para
la pared o el soporte pendiente.
& entrant de commande d'équilibre ; actionnez les fils à 4 » - 5 », pour
le mur ou la parenthèse en suspens.
Ankommendes & Steuer der Ordnung; antreiben Sie Drähte bis 4“ - 5“,
entweder für Wand oder pendent Haltewinkel r.
& entrante do controle da guarnição; pnha fios a 4” - 5”, para a
parede ou o suporte pendent.
& ricevuto di controllo della disposizione; alimenti i legare a 4„ - 5„,
per la parete o la staffa pendent.
4”-5”
Secure lanyard to lanyard clip.
Asegure el acollador al clip del acollador.
Fixez la lanière à l'agrafe de lanière.
Befestigen Sie Abzuglinie an Abzuglinieclip.
Fixe o colhedor ao grampo do colhedor.
Assicuri la cordicella alla clip della cordicella.
Complete ALL wiring connections.
Termine TODAS LAS conexiones del cableado.
Accomplissez TOUS LES raccordements de câblage.
Schließen Sie ALLE Verdrahtungsanschlüsse ab.
Termine TODAS AS conexões da fiação.
Completi TUTTI I collegamenti dei collegamenti.
WALL MOUNTING
1 2
3 4
26 Watts
COAX
C
(coax wire not supplied)
Wiring the dome can be completed by
referring to the diagram.
Atar con alambre la bóveda puede ser terminada
refiriendo al diagrama.
Le câblage du dôme peut être accompli en se
rapportant au diagramme.
Das Verdrahten der Haube kann durchgeführt
werden, indem man auf das Diagramm sich bezieht.
Wiring a abóbada pode ser terminado consultando
ao diagrama.
Legare la cupola può essere completato riferendosi
allo schema.
Align large arrows.
Alinee las flechas grandes.
Alignez les grandes flèches.
Richten Sie große Pfeile aus.
Alinhe grandes setas.
Allini le grandi frecce.
!
Important
Gasket
Must be in
place
To lock, turn clockwise.
Para trabarse, dar vuelta a la derecha.
Pour fermer à clef, tourner dans le sens des aiguilles d'une montre.
Zu sich verriegeln, nach rechts drehen.
Para travar, para girar no sentido horário.
Per per chiudere, girare in senso orario.
Secure with ¼” Allen wrench.
Asegure con la llave Allen del ¼”.
Fixez clé Allen avec de ¼ ».
Sichern Sie mit ¼“ Inbusschlüssel.
Fixe com chave Allen do ¼ de”.
Fissi con chiave di Allen del ¼„.
WALL MOUNTING
5 6
7
8
Trim incoming control and power wires to 4-5” for
either wall or pendent bracket.
Ajuste los alambres entrantes del control y de la energía a
4-5” para la pared o el soporte pendiente.
Équilibrez les fils entrants de commande et de puissance à 4-5
» pour le mur ou la parenthèse en suspens.
Trimmen Sie ankommende Steuer- und Energiendrähte bis
4-5“ entweder für Wand oder pendent Haltewinkel.
Apare fios entrantes do controle e do poder a 4-5” para a
parede ou o suporte pendent.
Assetti i legare ricevuti di potere e di controllo a 4-5„ per la
parete o la staffa pendent.
4”-5”
Secure lanyard to lanyard clip.
Asegure el acollador al clip del acollador.
Fixez la lanière à l'agrafe de lanière.
Befestigen Sie Abzuglinie an Abzuglinieclip.
Fixe o colhedor ao grampo do colhedor.
Assicuri la cordicella alla clip della cordicella.
Complete all wiring connections
(coax wire not supplied).
Termine todas las conexiones del cableado
(alambre coaxil no suministrado).
Accomplissez tous les raccordements de câblage
(fil coaxial non fourni).
Schließen Sie alle Verdrahtungsanschlüsse ab
(koaxialer Draht nicht geliefert).
Termine todas as conexões da fiação
(fio co-axial não fornecido).
Completi tutti i collegamenti dei collegamenti
(legare coassiale non fornito).
26 Watts
COAX
C
(coax wire not supplied)
Wiring the dome can be completed by
referring to the diagram.
Atar con alambre la bóveda puede ser terminada
refiriendo al diagrama.
Le câblage du dôme peut être accompli en se
rapportant au diagramme.
Das Verdrahten der Haube kann durchgeführt
werden, indem man auf das Diagramm sich bezieht.
Wiring a abóbada pode ser terminado consultando
ao diagrama.
Legare la cupola può essere completato riferendosi
allo schema.
FOR PENDENT/
WALL MOUNTING
9
10
11
12
Align large arrows.
Alinee las flechas grandes.
Alignez les grandes flèches.
Richten Sie große Pfeile aus.
Alinhe grandes setas.
Allini le grandi frecce.
To lock, turn clockwise.
Para trabarse, dar vuelta a la derecha.
Pour fermer à clef, tourner dans le sens des aiguilles d'une
montre.
Zu sich verriegeln, nach rechts drehen.
Para travar, para girar no sentido horário.
Per per chiudere, girare in senso orario.
!
Important
Gasket
Must be in
place
Secure with ¼” Allen wrench.
Asegure con la llave Allen del ¼”.
Fixez clé Allen avec de ¼”.
Sichern Sie mit ¼“ Inbusschlüssel.
Fixe com chave Allen do ¼ de”.
Fissi con chiave di Allen del ¼”.
To loosen - unscrew bolts ½” turn counter
clockwise.
Para aflojar - desatornille a la derecha contrario de la vuelta
del ½ de los pernos”.
Pour se desserrer - dans le sens des aiguilles d'une montre de
tour dévissez de boulons ½ » contre-.
Um sich zu lösen - schrauben Sie Schraubbolzen ½“
Umdrehungs-Gegenrechtses herum ab.
Para afrouxar - desaparafuse sentido horário contrário volta
do ½ dos parafusos da”.
Per allentare - sviti in senso orario di girata del ½ dei bulloni„
contro.
!
13
14
15
16
Green
Yellow
Orange
Red
Camera
Power
Accessory
Power
Camera = red & orange wires to terminal
Heater/Blower = yellow & green wires to terminal
Cámara fotográfica = alambres rojos y anaranjados al
terminal Heater/Blower = alambres del amarillo y del verde
al terminal
Appareil-photo = fils rouges et oranges à la borne
Heater/Blower = fils de jaune et de vert à la borne
Kamera = rote u. orange Leitungen zum Anschluß
Heater/Blower = Gelb- u. Grünleitungen zum Anschluß
Câmera = fios vermelhos & alaranjados ao terminal
Heater/Blower = fios do amarelo & do verde ao terminal
Macchina fotografica = legare rossi & arancioni al terminale
Heater/Blower = legare di verde & di colore giallo al termi-
nale
MM
2
AWG
,5 ,75 1,0 1,5 2,5 4 6
22 20 18 16 14 12 10
The beam angle may be adjusted on the
bottom of the unit.
Éstos se recomiendan las distancias máximas para
24VAC con una gota del voltage del 10%.
Ceux-ci sont recommandés des distances maximum
pour 24VAC avec une chute de tension de 10%.
Diese werden maximale Abstände für 24VAC mit
einem 10% Spannungsabfall empfohlen.
Estes são recomendados distâncias máximas para
24VAC com uma queda de tensão de 10%.
Questi sono suggeriti distanze massime per 24VAC
con una differenza de potenziale di 10%.
12
These are recommended maximum distances
for 24VAC with a 10% voltage drop.
19
18
RJ45
24VAC
1
2
3
4
Camera
Camera
Heater/Blower
Heater/Blower
Red
Orange
Yellow
Green
POWER
Max 40 Watts
26 Watts
Make the appropriate male and female connections. Indoor model does not include pre-run cables.
Haga las conexiones masculinas y femeninas apropiadas. El modelo de interior no incluye pre-funciona los cables.
Établissez les rapports masculins et femelles appropriés. Le modèle d'intérieur n'inclut pas pré-courent des câbles.
Stellen Sie die passenden männlichen und weiblichen Beziehungen her. Innenmodell schließt nicht vor-laufen lassen Kabel
ein.
Faça as conexões masculinas e fêmeas apropriadas. O modelo indoor não inclui pre-funciona cabos.
Faccia i collegamenti maschii e femminili adatti. Il modello dell'interno non include pre-fa funzionare i cavi.
17
Bolt camera to camera bracket as shown.
Cámara fotográfica del perno al soporte de la cámara
fotográfica según lo demostrado.
Appareil-photo de boulon à la parenthèse d'appareil-
photo comme montré.
Schraubbolzenkamera zum Kamerahaltewinkel, wie
gezeigt.
Câmera do parafuso ao suporte da câmera como
mostrado.
Macchina fotografica del bullone alla staffa della
macchina fotografica come indicato.
Loosen the thumb screws to adjust the
cameras height and tilt angle.
Afloje los tornillos de pulgar para ajustar la altura de las
cámaras fotográficas y para inclinar ángulo.
Desserrez les vis de pouce pour ajuster la taille
d'appareils-photo et pour incliner l'angle.
Lösen Sie die Rändelschrauben, um die Kamerahöhe
zu justieren und Winkel zu kippen.
Afrouxe os parafusos de polegar para ajustar a altura
das câmeras e para inclinar o ângulo.
Allenti le viti di pollice per registrare l'altezza delle
macchine fotografiche e per inclinare l'angolo.
For 12VDC models connect red and black
(12VDC wires) to camera power inputs complete
network wiring connections.
Para 12VDC los modelos conectan rojo y negro (los alambres
12VDC) a las entradas de energía de la cámara fotográfica termine
las conexiones del cableado de la red.
Pour 12VDC les modèles relient rouge et noir (fils 12VDC) aux
puissances fournies d'appareil-photo accomplissez les raccorde-
ments de câblage de réseau.
Für 12VDC schließen Modelle Rotes an und schwarz (Leitungen
12VDC) zu den Kameraenergie Eingängen führen Sie Netzverdrah-
tung Anschlüsse durch.
Para 12VDC os modelos conectam vermelho e preto (fios 12VDC)
às entradas de poder da câmera termine conexões da fiação da
rede.
Per 12VDC i modelli collegano rosso e nero (legare 12VDC) agli
input di alimentazione della macchina fotografica completi i
collegamenti dei collegamenti della rete.
For 24VAC models connect red and orange (24
VAC wires) to camera power inputs.
Para 24VAC los modelos conectan rojo y la naranja (24 alambres
del VAC) con las entradas de energía de la cámara fotográfica.
Pour 24VAC les modèles relient rouge et l'orange (24 fils de VCA)
aux puissances fournies d'appareil-photo.
Für 24VAC schließen Modelle Rotes und Orange (24 VAC Leitungen)
an Kameraenergie Eingänge an.
Para 24VAC os modelos conectam vermelhos e a laranja (24 fios do
VAC) às entradas de poder da câmera.
Per 24VAC i modelli collegano rosso e l'arancio (24 legare di VCA)
agli input di alimentazione della macchina fotografica.
20
21
22
23
15
Fasten down the dome with a Phillips
screwdriver.
Sujete abajo de la bóveda con un destornillador
Phillips.
Attachez en bas du dôme avec un tournevis
Phillips.
Befestigen Sie sich hinunter die Haube mit einem
Kreuzkopfschraubenzieher.
Prenda abaixo a abóbada com uma chave de
fenda Phillips.
Fissisi giù la cupola con un cacciavite "phillips".
Wipe the dome clean.
Limpie la bóveda limpia.
Essuyez le dôme.
Wischen Sie die Haube sauber ab.
Limpe a abóbada limpa.
Asciughi la cupola.
24
25
15
Replacement Parts List
FDW75CF2N
9
5
7
8
6
10
11
12
13
14
15
3
1
2
16
4
PART NUMBER DESCRIPTION
1 FD7C CLEAR REPLACEMENT CAPSULE
1A FD7T TINTED REPLACEMENT CAPSULE
2 RPFD7501 LOWER TRIM RING
3 RPFD703 DOME CLAMPING RING
4 RPNET02 NETWORK HGS POWER SUPPLY
5 RPFD072 24V HEATER
5A RPFD072/12 12V HEATER (12VDC MODELS ONLY)
6 RPFD080 BLOWER
7 RP3510 CAMERA BRACKET
8 RP70FP7PB CONNECTION PCB(24VAC)
8A RP70FP7PB12 CONNECTION PCB (12VDC)
9 RPFD040 HOUSING TOP
10 RPFD2612 HOUSING TOP GASKET
11 RPFD3245 WALL/PENDE
NT ADAPTER
12 RP
GK3356 WALL/PENDENT GASKET
13 RP3458 LANYARD SET
14 RP3551 WM11 WALL MOUNT
15 RP3606 PENDENT MOUNT BRACKET
16 RP3719 1 1/2 FEMALE /FEMALE COUPLING
N/S RPPKH2098 BRACKET PACKET ASSEMBLY
N/S RPPKE1100 ELECTRICAL PACKET ASSEMBLY
N/S RPTRAN02 110 TO 24VAC WALL TRANSFORMER
17
17 FRP FIXED CAMERA BRACKET
Product Registration/Warranty
Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest
quality products available and superior customer service.
Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles,
Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.
Register Your Products Online
Take a few moments and validate your purchase via the Online Product Registration Form at
www.videolarm.com/productregistration.jsp
Register your recent Moog Videolarm purchases and benet from the following:
Simple and Trouble-Free RMA process
Added into customer database to receive product updates / news
Eliminate the need to archive original purchase documents:
Receipts, Purchase Orders, etc…
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

Moog Videolarm FDW75CF2 Installation And Operation Instructions Manual

Categoria
Custodie per telecamere
Tipo
Installation And Operation Instructions Manual
Questo manuale è adatto anche per

in altre lingue