Moog Videolarm SM75CF2N Installation And Operation Instructions Manual

Marca: Moog Videolarm

Modello: SM75CF2N

Categoria: Accessori per telecamere di sicurezza

Tipo: Installation And Operation Instructions Manual

Questo manuale è adatto anche per

www.videolarm.com

S M 7 5 F I X E D

Vandal-Resistant Surface Mount Network Housing

Installation and Operation Instructions for the following models:

SM75CF2N IP Network Ready, vandal-resistant outdoor surface mount facing

down or facing towards the sky. Clear dome, with 24Vac input,

heater / blower, for an IP Network. Fixed Camera

ISM75CF2N IP Network Ready, vandal-resistant indoor surface mount facing

down or facing towards the sky. Clear dome, with 24Vac input,

heater / blower, for an IP Network. Fixed Camera

Before attempting to connect or operate this product, please read these instructions completely.

81-IN5376

02-27-2012

IMPORTANT SAFEGUARDS SAFETY PRECAUTIONS

UNPACKING

SERVICE

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with damp cloth.

7 Do not block any of the ventilation openings. Install in accordance with the

manufacturers instructions.

8 Cable Runs- All cable runs must be within permissible distance.

9 Mounting - This unit must be properly and securely mounted to a supporting

structure capable of sustaining the weight of the unit.

Accordingly:

a. The installation should be made by a qualied installer.

b. The installation should be in compliance with local codes.

c. Care should be exercised to select suitable hardware to install the unit, taking into

account both the composition of the mounting surface and the weight of the unit.

10 Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus ( including ampliers) that produce heat.

11 Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. When the provided plug does not t into your

outlet, consult an electrician for replacement of the obsolete outlet.

12 Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

13 Only use attachment/ accessories specied by the manufacturer.

14 Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

15 Unplug this apparatus during lighting storms or when unused for long periods of time.

16 Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled of objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

Be sure to periodically examine the unit and the supporting structure to make sure that the integrity

of the installation is intact. Failure to comply with the foregoing could result in the unit separating

from the support structure and falling, with resultant damages or injury to anyone or anything struck

by the falling unit.

Unpack carefully. Electronic components can be

damaged if improperly handled or dropped. If an item

appears to have been damaged in shipment, replace

it properly in its carton and notify the shipper.

Be sure to save:

1 The shipping carton and packaging material.

They are the safest material in which to make future

shipments of the equipment.

2 These Installation and Operating Instructions.

If technical support or service is needed, contact us at

the following number:

The lightning ash with an arrowhead symbol,

within an equilateral triangle, is intended to

alert the user to the presence of non-insulated

“dangerous voltage” within the product’s

enclosure that may be of sufcient magnitude

to constitute a risk to persons.

Este símbolo se piensa para alertar al usuario a la presencia

del “voltaje peligroso no-aisIado” dentro del recinto de los

productos que puede ser un riesgo de choque eléctrico.

Ce symbole est prévu pour alerter I’utilisateur à la presence

“de la tension dangereuse” non-isolée dans la clôture de

produits qui peut être un risque de choc électrique.

Dieses Symbol soll den Benutzer zum Vorhandensein der

nicht-lsolier “Gefährdungsspannung” innerhalb der

Produkteinschließung alarmieren die eine Gefahr des

elektrischen Schlages sein kann.

Este símbolo é pretendido alertar o usuário à presença “di

tensão perigosa non-isolada” dentro do cerco dos produtos

que pode ser um risco de choque elétrico.

Questo simbolo è inteso per avvertire I’utente alla presenza

“di tensione pericolosa” non-isolata all’interno della

recinzione dei prodotti che può essere un rischio di scossa

elettrica

The exclamation point within an equilateral

triangle is intended to alert the user to

presence of important operating and

maintenance (servicing) instructions in the

literature accompanying the appliance.

Este símbolo del punto del exclamation se piensa para

alertar al usuario a la presencia de instrucciones importantes

en la literatura que acompaña la aplicación.

Ce symbole de point d’exclamation est prévu pour alerter

l’utilisateur à la presence des instructions importantes dans

la littérature accompagnant l’appareil.

Dieses Ausruf Punktsymbol soll den Benutzer zum

Vorhandensein de wichtigen Anweisungen in der Literatur

alarmieren, die das Gerät begleitet.

Este símbolo do ponto do exclamation é pretendido alertar o

usuário à presença de instruções importantes na literatura

que acompanha o dispositivo.

Questo simbolo del punto del exclamaton è inteso per

avvertire l’utente alla presenza delle istruzioni importanti nella

letteratura che accompagna l'apparecchio.

TECHNICAL SUPPORT

AVAILABLE 24 HOURS

1- 800 - 554 -1124

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER ( OR BACK). NO USER- SERVICE-

ABLE PARTS INSIDE. REFER SEVICING

TO QUALIFIED SERVICE PERSONNEL.

Limited Warranty for Moog Videolarm Products

Moog Videolarm warrants these products to be free from defects in material or workmanship as follows:

PRODUCT CATEGORY PARTS \ LABOR

All Enclosures and Electronics* Five (5) Years

Poles/PolEvators™/CamEvator Three (3) Years

Warrior Series™/Q-View™/IR Illuminators Five (5) Years

SView Series™ Five (5) Years **6 months if used in auto scan/tour operation

Controllers Five (5) Years

Power Supplies Five (5) Years

EcoKit Three (3) Years

Accessory Brackets Five (5) Years

Liberty Dome Three (3) Years

*DeputyDome™, NiteTrac™, Igloo Dome, PurgeDome™ Three (3) Years **6 months if used in auto scan/tour operation

During the labor warranty period, to repair the Product, Purchaser will either return the defective product, freight prepaid, or deliver it to Moog Videolarm

Inc. Decatur GA. The Product to be repaired is to be returned in either its original carton or a similar package affording an equal degree of protection with

a RMA # (Return Materials Authorization number) displayed on the outer box or packing slip. To obtain a RMA# you must contact our Technical Support

Team at 800.554.1124, extension 101. Moog Videolarm will return the repaired Product freight prepaid to Purchaser. Moog Videolarm is not obligated to

provide Purchaser with a substitute unit during the warranty period or at any time. After the applicable warranty period, Purchaser must pay all labor and/or

parts charges.

The limited warranty stated in these product instructions is subject to all of the following terms and conditions.

TERMS AND CONDITIONS

1. NOTIFICATION OF CLAIMS: WARRANTY SERVICE: If Purchaser believes that the Product is defective in material or workmanship, then written notice with an

explanation of the claim shall be given promptly by Purchaser to Moog Videolarm. All claims for warranty service must be made within the warranty period.

If after investigation Moog Videolarm determines the reported problem was not covered by the warranty, Purchaser shall pay Moog Videolarm for the cost of

investigating the problem at its then prevailing per incident billable rate. No repair or replacement of any Product or part thereof shall extend the warranty period

of the entire Product. The speci c warranty on the repaired part only shall be in effect for a period of ninety (90) days following the repair or replacement of that

part or the remaining period of the Product parts warranty, whichever is greater.

2. EXCLUSIVE REMEDY: ACCEPTANCE: Purchaser’s exclusive remedy and Moog Videolarm’s sole obligation is to supply (or pay for) all labor necessary to repair any

Product found to be defective within the warranty period and to supply, at no extra charge, new or rebuilt replacements for defective parts.

3. EXCEPTIONS TO LIMITED WARRANTY: Moog Videolarm shall have no liability or obligation to Purchaser with respect to any Product requiring service during the

warranty period which is subjected to any of the following: abuse, improper use, negligence, accident, lightning damage or other acts of God (i.e., hurricanes,

earthquakes), modi cation, failure of the end-user to follow the directions outlined in the product instructions, failure of the end-user to follow the maintenance

procedures recommended by the International Security Industry Organization, written in product instructions, or recommended in the service manual for the

Product. Furthermore, Moog Videolarm shall have no liability where a schedule is speci ed for regular replacement or maintenance or cleaning of certain parts

(based on usage) and the end-user has failed to follow such schedule; attempted repair by non-quali ed personnel; operation of the Product outside of the

published environmental and electrical parameters, or if such Product’s original identi cation (trademark, serial number) markings have been defaced, altered,

or removed. Moog Videolarm excludes from warranty coverage Products sold AS IS and/or WITH ALL FAULTS and excludes used Products which have not

been sold by Moog Videolarm to the Purchaser. All software and accompanying documentation furnished with, or as part of the Product is furnished “AS IS”

(i.e., without any warranty of any kind), except where expressly provided otherwise in any documentation or license agreement furnished with the Product. Any

cost associated with removal of defective product and installation of replacement product is not included in this warranty.

4. PROOF OF PURCHASE: The Purchaser’s dated bill of sale must be retained as evidence of the date of purchase and to establish warranty eligibility.

DISCLAIMER OF WARRANTY

EXCEPT FOR THE FOREGOING WARRANTIES, Moog Videolarm HEREBY DISCLAIMS AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,

INCLUDING, BUT NOT LIMITED TO ANY AND/OR ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND/OR

ANY WARRANTY WITH REGARD TO ANY CLAIM OF INFRINGEMENT THAT MAY BE PROVIDED IN SECTION 2-312(3) OF THE UNIFORM COMMERCIAL

CODE AND/OR IN ANY OTHER COMPARABLE STATE STATUTE. Moog Videolarm HEREBY DISCLAIMS ANY REPRESENTATIONS OR WARRANTY THAT

THE PRODUCT IS COMPATIBLE WITH ANY COMBINATION OF NON-Moog Videolarm PRODUCTS OR NON-Moog Videolarm RECOMMENDED PRODUCTS

PURCHASER MAY CHOOSE TO CONNECT TO THE PRODUCT.

LIMITATION OF LIABILITY

THE LIABILITY OF Moog Videolarm, IF ANY, AND PURCHASER’S SOLE AND EXCLUSIVE REMEDY FOR DAMAGES FOR ANY CLAIM OF ANY KIND

WHATSOEVER, REGARDLESS OF THE LEGAL THEORY AND WHETHER ARISING IN TORT OR CONTRACT, SHALL NOT BE GREATER THAN THE ACTUAL

PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH SUCH CLAIM IS MADE. IN NO EVENT SHALL Moog Videolarm BE LIABLE TO PURCHASER

FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION,

REIMBURSEMENT OR DAMAGES ON ACCOUNT OF THE LOSS OF PRESENT OR PROSPECTIVE PROFITS OR FOR ANY OTHER REASON WHATSOEVER.

SM7 FIXED

24 VAC

3.3 Amps

84 Watts

Total Power: 84 Watts

Accessories: Heater: 50 Watts/Blower: 2 Watts

Camera Power: 32 Watts Max

Tools Required: .100” Flat Head Screwdriver

Phillips Head Screwdriver

24 VAC

3.3 amperios

84 vatios

Energía Total: 84 vatios

Accesorios: Calentador: 50 Watts/Blower: 2 vatios

Energía De la Cámara fotográfica: 32 vatios Max

Las Herramientas Requirieron: Destornillador Principal Plano Del 100"

Destornillador Principal Phillips

24 VCA

3.3 ampères

84 watts

Puissance Totale : 84 watts

Accessoires : Réchauffeur : 50 Watts/Blower : 2 watts

Puissance D'Appareil-photo : 32 watts Max

Les Outils besoin : Tournevis Principal Plat De 100"

Tournevis Principal Phillips

24 VAC

1.8 Ampere

84 Watt

Gesamtenergie: 84 Watt

Zusatzgeräte: Heizung: 50 Watts/Blower: 2 Watt

Kamera-Energie: 32 Watt Max

Werkzeuge Erforderten: 100"Flacher Hauptschraubenzieher

Kreuzkopfhauptschraubenzieher

24 VAC

1.8 ampères

84 watts

Poder Total: 84 watts

Acessórios: Calefator: 50 Watts/Blower: 2 watt

Poder Da Câmera: 32 watt Max

As Ferramentas Requereram: Chave de fenda Principal Lisa Do 100"

Chave de fenda Principal Phillips

24 VAC

1.8 ampère

84 watt

Alimentazione Totale: 84 watt

Accessori: Riscaldatore: 50 Watts/Blower: 2 watt

Alimentazione Della Macchina fotografica: 32 watt Max

Attrezzi Richiesti: Cacciavite Capo Piano Del 100"

Cacciavite Capo "phillips"

Electrical Specifications

Power 24VAC

Class 2 Only

Français

Deutsch

Italiano

Portuguese

Español

English

Contents of Box

Use Teflon Tape (included) to seal conduit plugs.

• Utilice la cinta del Teflon (incluida) para sellar los

enchufes del conducto.

• Utilisez la bande de teflon (incluse) pour sceller des

prises de conduit.

• Benutzen Sie das Teflonklebeband (eingeschlossen)

um Rohrstecker zu versiegeln.

• Use a fita adesiva do Teflon (incluída) selar plugues

da canalização.

• Utilizzi il nastro del Teflon (incluso) per sigillare le spine

del condotto.

Use teflon

tape

Wall

Mounting

WALL

WALL MOUNT

Mount only to suitable material such as brick,

concrete, wood, etc. (Wall mount sold separately)

• Monte solamente al material conveniente tal como ladrillo,

concreto, madera, etc. (montaje de la pared vendido por

separado)

• Montez seulement au matériel approprié tel que la brique,

le béton, le bois, etc..(bâti de mur vendu séparément)

• Bringen Sie nur zum verwendbaren Material wie Ziegelstein,

Beton, Holz, usw. an. (Wandeinfassung separat verkauft)

• Monte somente ao material apropriado tal como o tijolo, o

concreto, a madeira, etc..(montagem da parede vendida

separada)

• Monti soltanto a materiale adatto quali il mattone, il

calcestruzzo, il legno, ecc.

Wall

Mounting

Mounting surface should be capable of rigidly

holding 4(X) the weight of the entire assembly.

• La superficie de montaje debe ser capaz rígido de

llevar a cabo 4(X) al peso de la asamblea entera.

• La surface de montage devrait être capable de tenir

rigidement 4(X) le poids de l'assemblée entière.

• Befestigungsfläche sollte zu 4(X) das Gewicht der

gesamten Versammlung steif halten fähig sein.

• A superfície de montagem deve ser capaz rìgida de

prender 4(X) o peso do conjunto inteiro.

• La superficie di montaggio dovrebbe essere capace

rigidamente della tenuta 4(X) il peso di intero complessivo.

Wall

Mounting

Example on using conduit for wall mount

applications.

• Ejemplo en usar el conducto para los usos del montaje

de la pared.

• Exemple sur utiliser le conduit pour des applications de

bâti de mur.

• Beispiel auf dem Verwenden des Rohres für

Wandeinfassung Anwendungen.

• Exemplo em usar a canalização para aplicações da

montagem da parede.

• Esempio sul per mezzo del condotto per le applicazioni

del supporto della parete.

Wall

Mounting

Surface

Mounting

Remove the (4) side plates . Mounting Surface

should be of suitable material such as brick,

concrete, wood etc.

• Quite (4) las placas laterales usando la herramienta de la seguridad

proporcionada. La superficie de montaje debe estar de material

conveniente tal como ladrillo, concreto, madera etc.

• Enlevez (4) les plats latéraux à l'aide de l'outil de sécurité fourni. La

surface de montage devrait être de matériel approprié tel que la

brique, le béton, le bois etc...

• Entfernen Sie die (4) seitlichen Platten mit dem bereitgestellten

Sicherheit Werkzeug. Befestigungsfläche sollte vom verwendbaren

Material wie Ziegelstein, Beton, Holz usw. sein.

• Remova (4) as placas laterais usando a ferramenta da segurança

fornecida. A superfície de montagem deve ser do material apropriado

tal como o tijolo, o concreto, a madeira etc..

• Rimuova (4) le piastre laterali per mezzo dell'attrezzo di sicurezza fornito.

La superficie di montaggio dovrebbe essere di materiale adatto quali il

mattone, il calcestruzzo, il legno ecc.

Surface

Mounting

Securely mount housing to mounting surface. Replace

side plates when complete.

• Con seguridad montaje que contiene a la superficie de

montaje. Substituya las placas laterales cuando es completo.

• Solidement bâti logeant sur la surface de montage.

Remplacez les plats latéraux si complet.

• Sicher Einfassung, die zur Befestigungsfläche unterbringt.

Ersetzen Sie seitliche Platten, wenn komplett.

• Firmemente montagem que abriga à superfície de monta-

gem. Substitua placas laterais quando completo.

• Saldamente supporto che alloggia alla superficie di montag-

gio. Sostituisca le piastre laterali una volta completo.

Surface

Mounting

To connect conduit, remove conduit cover from side of

housing.

• Para conectar el conducto, quite la cubierta del conducto

del lado de la cubierta.

• Pour relier le conduit, enlevez la couverture de conduit du

côté du logement.

• Um Rohr anzuschließen, entfernen Sie Rohrabdeckung von der

Seite des Gehäuses.

• Para conectar a canalização, remova a tampa da

canalização do lado da carcaça.

• Per collegare il condotto, rimuova la copertura del condotto

dal lato di alloggiamento.

Remove Cover

Install conduit and secure with nut from inside of

housing.

• Instale el conducto y asegúrelo con la tuerca desde adentro

de la cubierta.

• Installez le conduit et le fixez avec l'écrou de l'intérieur du

logement.

• Bringen Sie Rohr an und sichern Sie mit Nuß von innen des

Gehäuses.

• Instale a canalização e fixe-a com a porca dentro da

carcaça.

• Installi il condotto e fissi con il dado dall'interno di

alloggiamento.

Surface

Mounting

26 Watts

Wiring the dome can be completed by

referring to the diagram.

• Atar con alambre la bóveda puede ser terminada

refiriendo al diagrama.

• Le câblage du dôme peut être accompli en se

rapportant au diagramme.

• Das Verdrahten der Haube kann durchgeführt

werden, indem man auf das Diagramm sich bezieht.

• Wiring a abóbada pode ser terminado consultando

ao diagrama.

• Legare la cupola può essere completato riferendosi

allo schema.

Connect red/black 12VDC power wires to

camera.

• Conecte los alambres de la energía de red/black

12VDC con la cámara fotográfica.

• Reliez les fils de puissance de red/black 12VDC à

l'appareil-photo.

• Schließen Sie red/black 12VDC Energie Leitungen an

Kamera an.

• Conecte fios do poder de red/black 12VDC à câmera.

• Colleghi i legare di alimentazione di red/black 12VDC

alla macchina fotografica.

NOTE: ISM75CFN does not include 24 to 12 step down

power supply.

NOTA: ISM75CFN no incluye la fuente de alimentación

descenderar 24 a 12.

NOTE : ISM75CFN n'inclut pas l'alimentation de l'énergie

24 à 12 dévoltrice.

ANMERKUNG: ISM75CFN schließt nicht Spg.

Versorgungsteil 24 bis 12 Schrittes unten ein.

NOTA: ISM75CFN não inclui a fonte de alimentação

de 24 a 12 etapas para baixo.

NOTA: ISM75CFN non include il gruppo di alimentazione

di 24 - 12 punti giù.

AWG

,5 ,75 1,0 1,5 2,5 4 6

22 20 18 16 14 12 10

The beam angle may be adjusted on the

bottom of the unit.

• Éstos se recomiendan las distancias máximas para

24VAC con una gota del voltage del 10%.

• Ceux-ci sont recommandés des distances maximum

pour 24VAC avec une baisse de volatage de 10%.

• Diese werden maximale Abstände für 24VAC mit einem

das 10% volatage Tropfen empfohlen.

• Estes são recomendados distâncias máximas para

24VAC com uma gota do volatage de 10%.

• Questi sono suggeriti distanze massime per 24VAC con

una goccia di volatage di 10%.

These are recommended maximum distances

for 24VAC with a 10% voltage drop.

1 12VDC+ Red

2 12VDC- Black

12VDC Power leads RM7F2N

WIRING INSIDE HOUSING

Camera power supply

DC power for camera

(red & black wires)

The beam angle may be adjusted on the

bottom of the unit.

• Instale la cámara fotográfica en el soporte fijo y termine

todos los usos del cableado.

• Installez l'appareil-photo sur la parenthèse fixe et accom-

plissez toutes les applications de câblage.

• Bringen Sie die Kamera am örtlich festgelegten Haltewin-

kel an und führen Sie alle Verdrahtung Anwendungen

durch.

• Instale a câmera no suporte fixo e termine todas as

aplicações da fiação.

• Installi la macchina fotografica sulla staffa fissa e completi

tutte le applicazioni dei collegamenti.

Install the camera on the fixed bracket and

complete all wiring applications.

Use the rubber seal when mounting housing

up right. Center the seal over the dome.

• Utilice el sello de goma al montar contener encima de la

derecha. Centre el sello sobre la bóveda.

• Utilisez le joint en caoutchouc en montant loger vers le haut de

la droite. Centrez le joint au-dessus du dôme.

• Benutzen Sie die Gummidichtung, wenn Sie die Unterbringung

herauf Recht anbringen. Zentrieren Sie die Dichtung über der

Haube.

• Use o selo de borracha ao montar abrigar acima da direita.

Centre o selo sobre a abóbada.

• Utilizzi la guarnizione di gomma quando montano l'alloggio

sulla destra. Concentrisi la guarnizione sopra la cupola.

Pull the seal over the face of the dome and

down onto the housing.

• Tire del sello sobre la cara de la bóveda y abajo sobre la

cubierta.

• Tirez le joint au-dessus du visage du dôme et vers le bas sur le

logement.

• Ziehen Sie die Dichtung über dem Gesicht der Haube und

unten auf das Gehäuse.

• Puxe o selo sobre a cara da abóbada e para baixo na

carcaça.

• Tiri la guarnizione sopra la faccia della cupola e giù

sull'alloggiamento.

Push seal edge up against dome and housing

surfaces.

• Empuje el borde del sello para arriba contra superficies de la

bóveda y de la cubierta.

• Poussez le bord de joint vers le haut contre des surfaces de

dôme et de logement.

• Drücken Sie Dichtung Rand oben gegen Haube- und

Gehäuseoberflächen.

• Empurre a borda do selo acima de encontro às superfícies da

abóbada e da carcaça.

• Spinga il bordo della guarnizione in su contro le superfici

dell'alloggiamento e della cupola.

Make sure there are NO GAPS or EDGES between

the seal edge and the dome’s surface.

• Cerciórese de que no haya BOQUETES o BORDES entre el

borde del sello y la superficie de la bóveda.

• Assurez-vous qu'il n'y a AUCUNE LACUNE ou BORD entre le

bord de joint et la surface du dôme.

• Stellen Sie sicher, daß es KEINE ABSTÄNDE oder RÄNDER

zwischen dem Dichtung Rand und der Oberfläche der Haube

gibt.

• Certifique-se que não há NENHUMA ABERTURA ou BORDA

entre a borda do selo e a superfície da abóbada.

• Assicurisi che non ci sono LACUNE o BORDI fra il bordo della

guarnizione e la superficie della cupola.

SM75 FIXED NETWORK

Replacement Parts List

RPSM7501

RPRH7502

RPRH7503

RPFD060

RPFD072

RPFD080

RC7T

RPSM7512

WMSM7

RPSM7511

RPSM7513

RPFD050

RPNET02

RPNET01

RPSM75040

Wall Mount

WMSM7

Sold Separately

Part Number Description

1 RPSM7501 DOME SEAL

2 RPRH7502 LOWER TRIM RING

3 RC7T TINTED REPLACEMENT CAPSULE

RC7C CLEAR REPLACEMENT CAPSULE

4 RPRH7503 DOME CLAMPING BRACKET

5 RPFD060 CAMERA BRACKET

6 RPFD080 (12VDC) BLOWER (USED IN 24V HGS)

7 RPFD072 24VAC HEATER

8 RPNET01 NETWORK CAMERA BRACKETS

9 RPNET02 NETWORK HGS POWER BOARD

RPFD050 (Model SM7HB)

RPRH706 (Model SM7FHB)

RPRH707 (Model SM7NHB)

CONNECTION PCB

CONNECTION PCB (FIXED MODELS)

CONNECTION PCB (NETWORK MODELS)

11 RPSM7511 HOUSING TOP

12 RPSM7512 MOUNTING HOLE CLOSURE

13 RPSM7513 CONDUIT HOLE CLOSURE

14 WMSM7 (Sold Separately) WALL MOUNT BRACKET (Sold Separately)

15 RPSM75040 HOUSING HARDWARE

RP40BRTRAN3

POWER CONVERSION MODULE ASSEMBLY

17 RPPKH2071 HOUSING HARDWARE PACKET B

RPRH713

FIXED CAMERA BRACKET

N/S RPPKE1125 ELECTRICAL PACKET, HB, FIXED NETWORK

RPSM75040

RPRH713

RP40BRTRAN3

RPPKH2071

(1)

(3)

(1)

RPPKE1100

RPPKH2110

(8)

(4)

RPPKH2094

RPPKE1100 ELECTRICAL PACKET

RPPKH2110 SECURITY TOOL AND SCREW PACKET

RPPKH2094 SPACER PACKET

Product Registration/Warranty

Thank you for choosing Moog Videolarm. We value your patronage and are solely committed to providing you with the highest

quality products available and superior customer service.

Should a problem arise, rest assure that Moog Videolarm stands behind its products by offering impressive warranty plans: 3 Years on all Housings, Poles,

Power Supplies, and Accessories and 5 Years on camera systems (SView, QView, Warriors), and InfraRed Illuminators.

Take a few moments and validate your purchase via the Online Product Registration Form at

www.videolarm.com/productregistration.jsp

• Simple and Trouble-Free RMA process

• Added into customer database to receive product updates / news

• Eliminate the need to archive original purchase documents:

Receipts, Purchase Orders, etc…