Extreme Networks AP4000 Guida di riferimento

Marca: Extreme Networks

Modello: AP4000

Tipo: Guida di riferimento

ExtremeWireless 802.11ax AP4000 and

AP4000-1 Indoor Access Point

AP4000 and AP4000-1 Overview

The AP4000 and AP4000-1 access point is a high-performance,

802.11ax Wi-Fi 6E access point. Designed for high-density indoor

environments, the access point can operate in 6 GHz, 5 GHz band,

and 2.4 GHz bands. The access point can support IEEE 802.11ax

Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user

access.

The access point can be installed on an indoor environment such as a

ceiling rail, on non-standard ceilings, on a wall, on a junction box, or to

a beam.

The AP4000 and AP4000-1 access point has the following features:

• One bi-color LED status light

For LED activity description, see “Status LED Activity Description”

• One light sensor located at the top of the device

• Two Ethernet ports - ETH0 and ETH1

Ethernet ports (ETH0 and ETH1) automatically negotiate half- and

full-duplex connections with the connecting device.

– ETH0: 100/1000/2500 Mbps auto-negotiation Ethernet port,

RJ45, Power over Ethernet (PoE) at 802.3at

– ETH1: 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45

These ports are auto-sensing and adjust to straight-through

and crossover standard Cat5e or better Ethernet cables

automatically. The access point receives power through an

Ethernet connection to the Eth0 port from power sourcing

equipment (PSE) that is compatible with the 802.3at and

802.3at standards.

• One USB port

Use the USB port to connect USB-based beacons such as iBeacon

and Internet of Things (IoT) devices. Remove the screw that

secures the protective cover to access the USB port.

• One micro USB console port

• One reset button

• One Kensington lock

The best practice is to use Kensington locks for locking the device.

• Temperature:

– Operating temperature: 0 °C to +50 °C (+32 °F to +122 °F)

– Storage temperature: -40 °C to +70 °C (-40 °F to +158 °F)

• Relative humidity: 0% to 95% non-condensing

Power Specifications

• IEEE 802.3at PoE Power

Power Options

• Power Draw:

– Typical: 13.0 W; Max: 14.5 W (without USB) (AP4000-1-WW)

– Typical: 15.8 W; Max: 17.3 W (with USB)

• 802.3at PoE capable

• Gigabit Ethernet port (RJ45 power input pins: Wires 4,5,7,8 or

1,2,3,6)

For detailed device and radio specifications, refer to the AP4000 and

AP4000-1 data sheets.

Figure 1 AP4000 and AP4000-1 access point ports

Table 1 AP4000 and AP4000-1 access point hardware ports

Callout Description

1 ETH1

2 ETH0/PoE+

3 Console port

4 USB port

5 Reset button

6 Security Kensington lock

Status LED Activity Description

The AP4000 and AP4000-1 access point has one status light on top

of the chassis. The status light conveys operational states for system

power, firmware updates, Ethernet and wireless interface activity, and

major alarms.

• Dark: power is off.

• Steady white: The device has successfully established a Control

And Provisioning of Wireless Access Points (CAPWAP) connection

to ExtremeCloud IQ and is operating normally.

• Slow-blinking white: The device has a CAPWAP connection to

ExtremeCloud IQ, but is operating on 802.3af power instead of

802.3at power.

• Steady amber: The device is initializing, rebooting, or is running

without a CAPWAP connection.

• Slow-blinking amber: The device has no CAPWAP connection to

ExtremeCloud IQ, and is operating on 802.3af power instead of

802.3at power.

• Fast-blinking amber: The device is upgrading its IQ Engine

firmware.

Micro USB Console Port

Through the console port, you can make a serial connection between your

management system and the access point. Use the SKU ACC-WIFI-MICRO-

USB when you order the Micro USB cable.

AP4000 and AP4000-1 Box Contents

Ensure that the following items shipped with your access point.

All optional brackets and accessories are sold separately. For detailed

instructions about all mounting procedures, refer to the AP4000

Access Point Installation Guide and the 802.11ax and Cloud Access

Points Accessories Guide on the Extreme Networks Documentation

Support site.

Position the Access Point before Installation

There is a red dot on the back of the access point and the bracket that

will work as a guide to position the access point for installation. Line

up the red dot on the access point and the bracket for ease of

installation.

Install the Access Point

Use these instructions as guidelines for mounting and connecting the

access point easily and safely.

Install the Access Point on a Standard Ceiling Rail

The AP4000 and AP4000-1 access point ships with a mounting

bracket for standard 15/16 in. dropped ceiling grid. For non-standard

ceiling rail installations, see “Install the Access Point on a Non-

Standard Ceiling Grid or a Wall” .

1 Remove the ceiling tiles.

2 Align the accessory on the ceiling rail in such a way that the

accessory metal hinges are almost parallel to the sides of the

ceiling rail.

3 Rotate the accessory clockwise until the metal hinges hook over

the edge of the rail and the white tabs click in place.

Note: When you connect to the device using the micro USB Console

port, the management station from which you connect to the device

must have a VT100 emulation program, such as Tera Term Pro (a free

terminal emulator) or Hilgraeve HyperTerminal (provided with

Windows operating systems from XP forward).

Table 2 Contents of the AP4000 and AP4000-1 Box

Quantity Item

1 An AP4000 or AP4000-1 access point

1Mounting bracket for 15/16 in. T-bar ceiling installation (part

number AH-ACC-BKT-AX-TB)

1 Quick Reference Guide

Electrical Hazard: Only qualified personnel must perform

installation procedures.

Note: There are two white tabs in the back of the accessory that

holds on to the ceiling rail in place. Use your finger to push and

unhook one side of the white tab if you want to remove the accessory

from the ceiling rail.

Figure 2 AH-ACC-BKT-AX-TB bracket

Table 3 AH-ACC-BKT-AX-TB bracket parts description

4 Attach the Ethernet port cap to the access point Ethernet port.

For more information about Ethernet cap, refer to Ethernet Cap

Accessory Information on the 802.11ax and Cloud Access Points

Accessories Guide.

5 Align the red dot on the back of the access point against the

bracket red dot.

6 Press and rotate the access point 1/8th turn clockwise until it clicks

into place on the accessory.

Figure 3 AP4000-1 or AP4000 access point ceiling install

7 Attach the Cat6 RJ45 cable to the ETH0 or Eth1 port.

8 If hidden cables are desired, then place the cable cover over the

Ethernet cable.

9 Replace the ceiling tiles.

Install the Access Point on a Non-Standard Ceiling

Grid or a Wall

For detailed non-standard ceiling grid installation or wall installation

instructions, refer to the 802.11ax and Cloud Access Points Accessories

Guide.

The access point can be installed on a non-standard ceiling grid using

the following accessories:

Table 4 Non-standard ceiling grid and wall accessories

Callout Description

1 Metal hinges on the AH-ACC-BKT-AX-TB bracket

2 Mounting holes for wall mounting

3 White tab on the AH-ACC-BKT-AX-TB bracket

Note: The accessory has a circular tip that fits into the circular

depression on the back of the access point.

Bracket part number Description

AH-ACC-BKT-AX-TB

Mounting bracket for Prelude ceilings (15/16

in. ceiling grid), Suprafine ceilings (9/16 in.

ceiling grid), and walls

AH-ACC-BKT-AX-IL Mounting bracket for Interlude (9/16 wide T-

bar with protrusion) ceilings

AH-ACC-BKT-AX-SL Mounting bracket for Silhouette ceilings

(ceiling grid with 1/8 in. or 1/4 in. bottom

opening)

ACC-BKT-AX-JB Junction box or wall mounting for indoor

access

points

ACC-BKT-AX-BEAM Beam mounting for indoor access points

AH-ACC-BKT-AX-WL Mounting bracket for direct-to-wall

installation

AH-ACC-BKT-916-KIT 9/16 in. ceiling mount brackets for non-flat

and protruded ceiling tiles. Use with AH-

ACC-BKT-AX-TB

Lock the Access Point after Installation (Optional)

Secure the access point by using the Kensington lock on the side of

the access point. The security feature is used to prevent the access

point from being removed from the mounting accessory.

Professional Installation Instruction

Installation personnel

This product is designed for specific application and needs to be

installed by a qualified personnel who has RF and related rule

knowledge. The general user shall not attempt to install or change

the setting.

Installation procedure

Refer to the ExtremeWireless AP4000 Access Point Installation Guide

for additional information.

Instructions d'installation professionnelle

Installation

Ce produit est destine a un usage specifique et doit etre installe par un

personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant.

L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final.

Procedure d'installation

Consulter le manuel d'utilisation ExtremeWireless AP4000 Access Point Installation Guide.

Regulatory and Compliance Information

Safety Guidelines

This section contains notices that are intended to protect your personal safety

and to prevent damage to the equipment.

Qualified Personnel:

Federal Communication Commission Interference

Statement

FCC regulations restrict the operation of this device to indoor use only.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one of the

following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

• Consult the dealer or an experienced radio or TV technician for help

ACC-BKT-TB-NF Adapter bracket AH-ACC-BKT-TB for 15/16

in. wide T-bars non-flat or protruded ceiling

tiles

ACC-BKT-AX-WNGADAPT Adapter bracket for using cloud access point

with WiNG mounting plate (#37201)

Note: The default bracket for wall installation is the ACC-BKT-AX-TB

bracket. Order the -TB bracket for new wall installations.

Warning: Select the installation position and ensure that the final

output power does not exceed the limit set forth in relevant rules. The

violation of the rule could lead to serious federal penalty.

Warning: Avertissement: Choisir avec soin la position d'installation et

s'assurer que la puissance de sortie ne depasse pas les limites en

vigueur. La violation de cette regle peut conduire a de serieuses

penalites federales.

Electrical Hazard: Only qualified personnel must perform installation procedures. Within

the context of the safety notes in this documentation, qualified persons are defined as

persons who are authorized to commission grounding devices, systems, and circuits in

accordance with established safety practices and standards. A qualified person understands

the requirements and risks involved with installing outdoor electrical equipment in

accordance with national codes.

Bracket part number Description

ExtremeWirelessTM

Indoor Access Point

Quick Reference

AP4000-WW and AP4000-1-WW

Scan to Download the

ExtremeCloud IQ Companion Mobile Application

Commission, monitor, and troubleshoot devices easily with ExtremeCloud IQ

Companion Mobile Application (supported on iOS and Android).

Use your mobile device camera to scan the serial number, capture installation

images, assign or change device location, and network policy. The

ExtremeCloud IQ Companion Mobile Application enables you to access the

device CLI for troubleshooting and view device and client status

ExtremeCloud IQ Companion ExtremeCloud IQ Companion

iOS Mobile Application Android Mobile Application

Scan for Product Support Details

ExtremeCloud IQ Companion Documentation

Mobile Application Onboarding

Notice

Legal Notices

Extreme Networks, Inc. reserves the right to make changes in specifications

and other information contained in this document and its website without

prior notice. The reader should in all cases consult representatives of Extreme

Networks to determine whether any such changes have been made.

The hardware, firmware, software or any specifications described or referred

to in this document are subject to change without notice.

Trademarks

Extreme Networks and the Extreme Networks logo are trademarks or

registered trademarks of Extreme Networks, Inc. in the United States and/or

other countries.

All other names (including any product names) mentioned in this document

are the property of their respective owners and may be trademarks or

registered trademarks of their respective companies/owners.

For additional information on Extreme Networks trademarks, please see:

www.extremenetworks.com/company/legal/trademarks/

Documentation, Installation Videos, and Support

For product support, including Documentation and Installation Videos, visit:

www.extremenetworks.com/documentation

This device is restricted for indoor use. This equipment may only be operated

indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject

the operator to serious legal penalties.

The operation of this device is prohibited on oil platforms, cars, trains, boats,

and aircraft, except that operation of this device is permitted in large aircraft

while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125

GHz band is prohibited for control of or Communications with unmanned

aircraft systems.

Japan Indoor Use Statement

For Japan, AP4000-1 access point is restricted for indoor use in the 5150-5350

MHz band only.

Japan Voluntary Control Council for Interference (VCCI) -

Class B

European Union (EU) Radiation Warning Statement

Selling Countries:

Brazil Compliance Statement

Este produto está homologado pela ANATEL, de acordo com os

procedimentos regulamentados pela Resolução n°. 242/2000 e atende aos

requisitos técnicos aplicados.

Este equipamento não tem direito à proteção contra interferência prejudicial e

não pode causar interferência em sistemas devidamente autorizados. Para

maiores informações, consulte o site da ANATEL – www.anatel.gov.br.

Mexico Compliance Statement

La operacion de este equipo esta sujeta a las siguientes dos condiciones

1 es posible que este equipo o dispositivo no cause interferencia perjudicial y

2 este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo

la que pueda causar su operacion no deseada.

UK Statement and CE Statement

This equipment complies with the UK and EEA radiation exposure limits set

forth for an uncontrolled environment. This equipment should be installed and

operated with minimum distance of 20 cm between the radiator and your

body.

The frequency and the maximum transmitted power in the UK and European

Conformity are listed below:

2412-2472MHz: 19.96 dBm (AP4000 only)

5180-5240MHz: 22.95 dBm

5260-5320MHz: 22.98 dBm

5500-5700MHz: 22.98 dBm

5745-5825 MHz: 22.98 dBm

5955-6415MHz: 22.97 dBm

CE - The device is restricted to indoor use only when operating in the 5150-

5350 MHz and 5945 to 6425 MHz frequency range.

UK - The device is restricted to indoor use only when operating in the 5150-

5350 MHz and 5925 to 6425 MHz frequency range.

The device is restricted for indoor use only in the frequency range.

Hereby, Extreme Networks declares that the radio equipment AP4000 and

AP4000-1 is in compliance with Radio Equipment Regulations 2017.

Extreme Networks UK Address

Extreme Networks, UK Ltd.

250 Longwater Avenue Green Park

1st Floor

Reading, UK

Caution: Any changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate this equipment.

Warning: FCC Radiation Exposure Statement: This equipment complies with FCC

radiation exposure limits set forth for an uncontrolled environment. This equipment should

be installed and operated with minimum distance of 44 cm between the radiator and your

body.

Warning: This equipment complies with EU radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with minimum

distance of 20 cm between the radiator and your body.

Restrictions or

requirements in the UK

AT BE BG HR CY CZ DK

EE FI FR DE EL HU IE

IT LV LT LU MT NL PL

PT RO SK SI ES SE UK(NI)

Extreme Networks EU Importer Address

Extreme Networks, Ireland Ops Ltd.

Rineanna House Shannon Industrial Estate

Shannon,

V14CA36 Ireland

Industry Canada Notice

This device complies with ISED’s licence-exempt RSSs. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d’ ISED applicables aux appareils

radio exempts de licence. L’exploitation est autorisée aux deux conditions

suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et

(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage

susceptible de provoquer un fonctionnement indésirable.

Taiwan Regulatory Statement

取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均不得

擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻器材之

使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停

用，並改善至無干擾時方得繼續使用。前述合法通信，指依電信管理法規

定作業之無線電通信。低功率射頻器材須忍受合法通信或工業、科學及醫

療用電波輻射性電機設備之干擾。應避免影響附近雷達系統之操作。

請至此連結閱讀中文說明: https://www.extremenetworks.com/support/

documentation/.

ExtremeWireless 802.11ax Wi-Fi 6E AP4000 無線接入點無線電：3 個無

線電 (2.4GHz、5 GHz 和 6 GHz); 1 個物聯網無線電 (BLE/802.15.4)

Hazardous Substances

This product complies with the requirements of Directive 2011/65/EU of the

European Parliament and of the Council of 8 June 2011 on the restriction of the

use of certain hazardous substances in electrical and electronic equipment.

European Waste Electrical and Electronic Equipment

(WEEE) Notice

In accordance with Directive 2012/19/EU of the European Parliament on waste

electrical and electronic equipment (WEEE):

1 The symbol above indicates that separate collection of electrical and

electronic equipment is required.

2 When this product has reached the end of its serviceable life, it cannot be

disposed of as unsorted municipal waste. It must be collected and treated

separately.

3 It has been determined by the European Parliament that there are potential

negative effects on the environment and human health as a result of the

presence of hazardous substances in electrical and electronic equipment.

It is the users’ responsibility to utilize the available collection system to ensure

WEEE is properly treated.

For information about the available collection system, contact Extreme

Environmental Compliance at [email protected].

Warning: For indoor use only.

Pour une utilisation en intérieur uniquement.

Warning: IC Radiation Exposure Statement: This equipment complies with IC RSS-102

radiation exposure limits set forth for an uncontrolled environment. This equipment should

be installed and operated with minimum distance of 27 cm between the radiator and your

body.

Warning: Cet équipement est conforme aux limites d'exposition aux rayonnements IC

établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé

avec un minimum de 27 cm de distance entre la source de rayonnement et votre corps.

Caution: The device for operation in the band 5150-5250 MHz is only for indoor use to

reduce the potential for harmful interference to co-channel mobile satellite systems.

Caution: Avertissement: les dispositifs fonctionnant dans la bande 5150-5250 MHz sont

réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage

préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.

Supplement to Product Instructions

Declaration of Conformity in Languages of the European

Community

English Hereby, Extreme Networks declares that the radio equipment type

(AP4000 and AP4000-1) is in compliance with Directive 2014/53/EU. For

full text of the EU Declaration of Conformity, contact Extreme Regulatory

Compliance at compliancerequest@extremenetworks.com

Finnish Täten Extreme Networks vakuuttaa, että Radio laite tyyppi (AP4000 and

AP4000-1) on direktiivin 2014/53/EU mukainen.EU

vaatimustenmukaisuusvakuutuksen täydellisestä tekstistä ota yhteyttä

äärimmäisiin viranomais säädöksiin osoitteessa

compliancerequest@extremenetworks.com

Dutch Extreme Networks verklaart hierbij dat het type radioapparatuur

(AP4000 and AP4000-1) in overeenstemming is met richtlijn 2014/53/

EU.Voor de volledige tekst van de EU-conformiteitsverklaring u contact

opnemen met extreme regelgeving op

compliancerequest@extremenetworks.com

French Par la présente, Extreme Networks déclare que le type d'équipement

radio (AP4000 and AP4000-1) est conforme à la directive 2014/53/

UE.Pour le texte intégral de la Déclaration de conformité de l'UE, veuillez

communiquer avec Extreme Regulatory Compliance à

compliancerequest@extremenetworks.com

Swedish Härmed intygar Extreme Networks att radioutrustning typ (AP4000 and

AP4000-1) överensstämmer med direktiv 2014/53/EU.För fullständig text

av EU-försäkran om överensstämmelse, vänligen kontakta Extreme

regelefterlevnad på compliancerequest@extremenetworks.com

Danish Herved erklærer Extreme Networks, at radioudstyrs typen (AP4000 and

AP4000-1) er i overensstemmelse med direktiv 2014/53/EU.For den fulde

ordlyd af EU-overensstemmelseserklæringen bedes du kontakte Extreme

Regulatory Compliance på compliancerequest@extremenetworks.com

German Dabei erklärt Extreme Networks, dass der Funkgerätetyp (AP4000 and

AP4000-1) mit der Richtlinie 2014/53/EU im Einklang steht.Für den

vollständigen Wortlaut der EU-Konformitätserklärung wenden Sie sich

bitte an extreme Regulatory Compliance unter

compliancerequest@extremenetworks.com

Greek Με την παρούσα, ακραία δίκτυα δηλώνουν ότι ο τύπος του

ραδιοεξοπλισμού (AP4000 and AP4000-1) συμμορφώνεται με την

οδηγία 2014/53/ΕΕ.Για το πλήρες κείμενο της δήλωσης συμμόρφωσης

ΕΕ, παρακαλούμε επικοινωνήστε με την ακραία κανονιστική

συμμόρφωση στο compliancerequest@extremenetworks.com

Icelandic Hérlendis, Extreme Networks, lýsa því yfir að útvarpsbúnaðargerðin

(AP4000 and AP4000-1) sé í samræmi við tilskipun 2014/53/ESB.Fyrir

fullan texta í ESB yfirlýsingu um samræmi, vinsamlegast hafðu samband

við Extreme Reglufylgni á compliancerequest@extremenetworks.com

Italian Di conseguenza, Extreme Networks dichiara che il tipo di apparecchiature

radio (AP4000 and AP4000-1) è conforme alla direttiva 2014/53/EU.Per il

testo integrale della Dichiarazione di conformità dell'UE, contattare

Extreme Regulatory Compliance presso

compliancerequest@extremenetworks.com

Spanish Por la presente, Extreme Networks declara que el tipo de equipo

radioeléctrico (AP4000 and AP4000-1) cumple con la Directiva 2014/53/

UE.Para obtener el texto completo de la Declaración de conformidad de la

UE, póngase en contacto con Extreme Regulatory Compliance en

compliancerequest@extremenetworks.com

Portuguese Por este meio, a Extreme Networks declara que o tipo de equipamento de

rádio (AP4000 and AP4000-1) está em conformidade com a Diretiva

2014/53/UE.Para obter o texto integral da Declaração de Conformidade

da UE, contacte o cumprimento regulamentar extremo em

compliancerequest@extremenetworks.com

Malti B ' dan, netwerks estremi, jiddikjara li t-tip ta ' tagħmir tar-radju (AP4000

and AP4000-1) huwa konformi mad-Direttiva 2014/53/UE.Għat-test sħiħ

tad-dikjarazzjoni ta ' konformità tal-UE, jekk jogħġbok ikkuntattja lill-

konformità regolatorja compliancerequest@extremenetworks.com P/N 9037075-07 Rev AD

Extreme Networks AP4000 Guida di riferimento

Marca: Extreme Networks

Modello: AP4000

Tipo: Guida di riferimento

Scarica il pdf

rapporto

Extreme Networks AP4000 Guida di riferimento

Extreme Networks AP4000 Guida di riferimento

Documenti correlati

Altri documenti