Ariston LFF 8S112 X AG Guida utente

Marca: Ariston

Modello: LFF 8S112 X AG

Categoria: Lavastoviglie

Tipo: Guida utente

LFF 8S112

English

Operating instructions

DISHWASHER - Contents

Operating instructions, 1

Precautions and advice, 2-3

Product Data, 7

Assistance, 9

Installation, 10-11

Description of the appliance, 12

Refined salt and rinse aid, 13

Loading the racks, 14-15

Detergent and dishwasher use, 16

Wash cycles, 17

Special wash cycles and options, 18

Care and maintenance, 19

Troubleshooting, 20

Español

Manual de instrucciones

LAVAVAJILLAS - Índice

Instrucciones de uso, 1

Precauciones y consejos, 3-4

Ficha producto, 7

Asistencia, 9

Instalación, 21-22

Descripción del aparato, 23

Sal regeneradora y abrillantador, 24

Cargar los cestos, 25-26

Detergente y uso del lavavajillas, 27

Programas, 28

Programas especiales y opciones, 29

Mantenimiento y cuidados, 30

Anomalías y soluciones, 31

Italiano

Istruzioni per l’uso

LAVASTOVIGLIE - Sommario

Istruzioni per l’uso, 1

Precauzioni e Consigli, 5-6

Scheda prodotto, 8

Assistenza, 9

Installazione, 45-46

Descrizione dell’apparecchio, 47

Sale Rigenerante e Brillantante, 48

Caricare i cesti, 49-50

Detersivo e uso della lavastoviglie, 51

Programmi, 52

Programmi Speciali ed Opzioni, 53

Manutenzione e cura, 54

Anomalie e rimedi, 55

Português

Instruções de uso

MÁQUINA DE LAVAR LOUÇA - Índice

Instruções de uso, 1

Precauções e conselhos, 4-5

Ficha do produto, 8

Assistência, 9

Instalação, 33-34

Descrição do aparelho, 35

Sal, regenerador e abrilhantador, 36

Carregar os cestos, 37-38

Detergente e uso da máquina de lavar louça, 39

Programas, 40

Programas especiais e opções, 41

Manutenção e cuidados, 42

Anomalias e soluções, 43

Precautions and advice

This appliance was designed and

manufactured in compliance with international

safety standards. The following information has

been provided for safety reasons and should

be read carefully.

Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given

away or moved, make sure the manual is kept

with the machine.

Read the instructions carefully, as they include

important information on safe installation, use

and maintenance.

This appliance was designed for domestic use

or similar applications, for example:

- farmhouses;

- use by guests in hotels, motels and other

residential settings;

- bed & breakfasts.

Remove the appliance from all packaging

and make sure it was not damaged during

transportation. If it was damaged, contact the

retailer and do not proceed any further with the

installation process.

General safety

• This appliance should not be operated

by children younger than 8 years, people

with reduced physical, sensory or mental

capacities, or inexperienced people who

are not familiar with the product, unless they

are given close supervision or instructions on

how to use it safely and are made aware by

a responsible person of the dangers its use

might entail.

• Children must not play with the appliance.

• It is the user's responsibility to clean and

maintain the appliance. Children should

never clean or maintain it unless they are

given supervision.

• The appliance was designed for domestic

use inside the home and is not intended for

commercial or industrial use.

• The appliance must be used to wash

domestic crockery in accordance with the

instructions in this manual.

• The appliance must not be installed outdoors,

even in covered areas. It is extremely

dangerous to leave the machine exposed to

rain and storms.

• Do not touch the appliance when barefoot.

• When unplugging the appliance always pull

the plug from the mains socket. Do not pull

on the cable.

• The water supply tap must be shut off and the

plug should be removed from the electrical

socket at the end of every cycle and before

cleaning the appliance or carrying out any

maintenance work.

• The maximum number of place settings is

shown in the product sheet.

• If the appliance breaks down, do not under

any circumstances touch the internal parts in

an attempt to perform the repair work yourself.

• Do not lean or sit on the open door: this may

cause the appliance to overturn.

• The door should not be left open as it may

create a dangerous obstacle.

• Keep detergent and rinse aid out of reach of

children.

• The packaging material should not be used

as a toy.

• Knives and other utensils with sharp edges

must be placed either with the points/blades

facing downwards in the cutlery basket or

horizontally on the tip-up compartments or

in the tray/third basket, if available.

• Connect the appliance to the water mains

using the new supply hose provided with the

appliance. Do not re-use the old hose.

• Install the back side of a free-standing

dishwasher against a wall.

Disposal

• To dispose of any packaging materials, follow

local legislation so that the packagings may

be reused.

• The European Directive 2012/19/EU relating

to Waste Electrical and Electronic Equipment

(WEEE) states that household appliances

should not be disposed of using the

normal solid urban waste cycle. Exhausted

appliances should be collected separately

in order to optimise the cost of reusing and

recycling the materials inside the machine,

while preventing potential damage to the

atmosphere and public health. The crossed-

out dustbin symbol shown on all products

reminds the owners of their obligations

regarding separated waste collection.

For further information relating to the correct

disposal of household appliances, owners

may contact the relevant public authority or

the local appliance dealer.

Saving energy and respecting the

environment

Saving water and energy

• Only begin a wash cycle when the dishwasher

is full. While waiting for the dishwasher to be

filled, prevent unpleasant odours with the

Soak cycle

(if available, see Wash Cycles).

• Select a wash cycle that is suited to the type of

crockery and to the soil level using the Table

of Wash Cycles:

- For dishes with a normal soil level, use

the Eco wash cycle, which guarantees low

energy and water consumption levels.

- If the load is smaller than usual activate

the Half Load option

(see Special wash cycles and

options, if available).

• If your electricity supply contract gives details

of electricity-saving time bands, run the wash

cycles when electricity prices are lower. The

Delayed Start option can help you organise

the wash cycles accordingly

(see Special wash

cycles and options, if available).

Precauciones y consejos

El aparato ha sido proyectado y fabricado

en conformidad con las normas internacionales

de seguridad Estas advertencias se

suministran por razones de seguridad y

deben ser leídas atentamente.

Es importante conservar este manual para

poder consultarlo en cualquier momento. En

caso de venta, de cesión o de traslado, el

manual debe permanecer junto al aparato.

Lea atentamente las instrucciones: contienen

información importante sobre la instalación,

sobre el uso y sobre la seguridad.

Este aparato ha sido proyectado para uso

doméstico y para aplicaciones similares, por

ejemplo:

- cortijos;

- uso por parte de clientes en hoteles, moteles

y otros ambientes de tipo residencial;

- bed and breakfast.

Desembalar el aparato y comprobar que no

haya sufrido daños durante el transporte. Si

estuviera dañado, no conectarlo; llamar al

revendedor.

Seguridad general

• Este electrodoméstico puede ser utilizado

por niños de no menos de 8 años de

edad y por personas con capacidades

físicas, sensoriales o mentales reducidas, o

carentes de experiencia o del conocimiento

necesario, pero sólo bajo la estricta

vigilancia de una persona responsable,

siguiendo las instrucciones sobre el uso

seguro y después de comprender bien los

peligros inherentes.

• Los niños no deben jugar con el aparato.

• La limpieza y el mantenimiento del aparato

deben ser efectuados por el usuario.

No deben ser efectuados por niños sin

vigilancia.

• El aparato ha sido fabricado para un uso

de tipo no profesional en el interior de una

vivienda.

• El aparato debe ser utilizado para el lavado

de vajilla de uso doméstico y según las

instrucciones contenidas en este manual.

• El aparato no se debe instalar al aire libre, ni

siquiera si el lugar está protegido, porque

es muy peligroso dejarlo expuesto a la

lluvia o a las tormentas.

• No tocar el lavavajillas con los pies

descalzos.

• No desconectar la clavija de la toma de

corriente tirando del cable sino sujetando

la clavija.

• Es necesario cerrar el grifo de agua y

desconectar la clavija de la toma de

corriente al final de cada ciclo antes

de realizar operaciones de limpieza y

mantenimiento.

• El número máximo de cubiertos se indica

en la ficha del producto.

• En caso de avería, no acceder nunca a

los mecanismos internos para intentar su

reparación.

• No apoyarse ni sentarse sobre la puerta

abierta: el aparato podría voltearse.

• La puerta no se debe dejar abierta, ya que

podría causar tropiezos.

• Conservar el detergente y el abrillantador

fuera del alcance de los niños.

• Los embalajes no son juguetes para los

niños.

• Los cuchillos y utensilios con bordes

filosos deben colocarse en el cesto para

cubiertos con las puntas/hojas hacia abajo

o en posición horizontal sobre los cestos

especiales adicionales o en la bandeja o el

tercer cesto en los modelos que lo tienen.

• El aparato se debe conectar a la red del

agua utilizando el nuevo tubo de carga. El

tubo de carga anterior no se debe reutilizar.

Si el lavavajillas es de libre instalación, el

lado posterior debe quedar contra una

pared.

Eliminación

• Eliminación del material de embalaje:

respetar las normas locales para que los

embalajes puedan ser reutilizados.

• La norma Europea 2012/19/EU sobre

residuos de equipos eléctricos y

electrónicos (REEE) establece que los

electrodomésticos no se deben eliminar

de la misma manera que los desechos

sólidos urbanos. Los aparatos eliminados

deben ser recogidos en forma separada

para optimizar la tasa de recuperación

y reciclado de los materiales que los

componen e impedir que provoquen

daños a la salud y el medio ambiente. El

símbolo del cubo tachado se encuentra

en todos los productos para recordar la

obligación de recolección separada.

Para mayor información sobre la correcta

eliminación de los electrodomésticos, los

propietarios podrán dirigirse al servicio

público encargado de la recolección o a

los revendedores.

Ahorrar y respetar el medio ambiente

Ahorrar agua y energía

• Poner en funcionamiento el lavavajillas sólo

con plena carga. A la espera de que la

máquina se llene, prevenir los malos olores

con el ciclo Remojo

(si lo hay - ver Programas).

• Seleccionar un programa adecuado al

tipo de vajilla y al grado de suciedad

consultando la Tabla de programas:

- para la vajilla con suciedad normal utilizar

el programa Eco, que garantiza un bajo

consumo energético y de agua.

- si la carga es reducida, activar la opción

Media carga

(si la hay - ver Programas especiales

y opciones).

• Si el suministro de energía eléctrica prevé

horarios de ahorro energético, realizar los

lavados en los horarios con tarifa reducida.

Para organizar mejor los lavados, puede

ser útil la opción de Arranque diferido

(si la

hay - ver Programas especiales y opciones).

Precauções e conselhos

O aparelho foi projetado e construído

conforme as normas internacionais de

segurança. Estas advertências são

fornecidas por razões de segurança e

devem ser lidas com atenção.

É importante conservar este manual para

poder consultá-lo em qualquer momento.

Em caso de venda, cessão ou mudança,

certifique-se que o mesmo fique junto ao

aparelho.

Ler atentamente as instruções: nelas estão

presentes informações importantes sobre a

instalação, o uso e a segurança.

Este aparelho foi projetado para o uso

doméstico ou para aplicações simples,

como por exemplo:

- casas de férias;

- uso por parte de clientes em hotéis, motéis

e outros ambientes de tipo residencial;

- bed and breakfast.

Desembale o aparelho e controle que não

tenha sofrido danos durante o transporte. Se

estiver danificado, não o acenda e contacte

o revendedor.

Segurança geral

• Este eletrodoméstico pode ser utilizado por

crianças com mais de 8 anos e pessoas

com capacidades físicas, sensoriais ou

mentais reduzidas, ou sem experiência e

conhecimentos necessários, desde que

sob rigorosa vigilância de uma pessoa

responsável ou após terem recebido

instruções relativas ao uso seguro do

aparelho e à compreensão dos perigos

associados ao uso.

• As crianças não devem brincar com o

aparelho.

• A limpeza e manutenção do aparelho

devem ser efetuadas pelo utilizador.

Não deve ser efetuada por crianças sem

vigilância.

• O aparelho foi concebido para um uso de

tipo não profissional dentro do ambiente

doméstico.

• O aparelho deve ser utilizado para a

lavagem de louças de utilização doméstica,

conforme as instruções escritas neste

manual.

• Esta máquina de lavar louça não pode

ser instalada ao ar livre, nem mesmo num

lugar protegido por um telhado: é muito

perigoso deixá-la exposta à chuva e aos

temporais.

• Não toque na máquina com os pés

descalços.

• Não retire a ficha da tomada de corrente

puxando o cabo, mas segure a ficha.

• É necessário fechar a torneira da água e

tirar a ficha da tomada da corrente elétrica

no final de cada ciclo, antes de efetuar

operações de limpeza e manutenção.

• O número máximo de louças é indicado

na ficha do produto.

• Em caso de avarias, jamais aceda aos

mecanismos internos para tentar reparar

sozinho.

• Não se apoie nem se sente sobre a porta

aberta: o aparelho pode voltar-se.

• A porta não pode ficar aberta para evitar

o perigo de tropeçar.

• Mantenha o detergente e o abrilhantador

fora do alcance das crianças.

• As embalagens não são brinquedos para

crianças.

• As facas e utensílios com rebordos afiados

devem ser colocados com as pontas/

lâminas viradas para baixo no cesto

dos talheres ou em posição horizontal

nas peças basculantes no tabuleiro/

terceiro cesto, nos modelos em que esteja

presente.

• O aparelho deve ser ligado à rede hídrica

através do novo tubo de carga e o tubo

de carga antigo não deve ser reutilizado.

Se a máquina de lavar louça for de

instalação livre, o lado traseiro da mesma

deve ser colocado contra uma parede.

Eliminação

• Eliminação do material de embalagem:

respeite a normas locais, assim as

embalagens poderão ser reaproveitadas.

• A diretiva Europeia 2012/19/EU

relativa aos resíduos de equipamentos

elétricos e eletrónicos (REEE) prevê

que os eletrodomésticos não devem

ser eliminados no normal fluxo dos

resíduos sólidos urbanos. Os aparelhos

em fim de vida devem ser recolhidos

separadamente para otimizar a taxa de

recuperação e reciclagem dos materiais

que os compõem e impedir potenciais

danos à saúde e ao meio ambiente.

O símbolo do cesto do lixo cancelado

está indicado em todos os produtos

para lembrar o dever de coleta seletiva.

Para mais informações sobre a correta

eliminação dos eletrodomésticos, os

proprietários poderão contactar o serviço

de coleta público ou os revendedores.

Economizar e respeitar o ambiente

Economizar água e energia

• Use a máquina de lavar louça somente

com carga plena. Enquanto espera que

a máquina fique cheia, previna os maus

cheiros com o ciclo de Amolecimento

(se

disponível - ver Programas)

• Selecione um programa adequado ao

tipo de louças e ao grau de sujidade

consultando a tabela dos programas:

- para louças normalmente sujas, utilize

o programa Eco, que garante baixos

consumos energéticos e de água.

- se a carga for reduzida, utilize a opção

Meia carga

(se disponível - ver Programas especiais

e opções).

• Se o seu contrato de fornecimento de

energia elétrica previr faixas horárias de

economia energética, efetue as lavagens

nos horários com tarifa reduzida. A opção

Início Posterior pode ajudar a organizar

as lavagens nesse sentido

(

se disponível - ver

Programas especiais e opções).

Precauzioni e consigli

L’apparecchio è stato progettato e costruito

in conformità alle norme internazionali di

sicurezza. Queste avvertenze sono fornite per

ragioni di sicurezza e devono essere lette

attentamente.

È importante conservare questo libretto per

poterlo consultare in ogni momento. In caso di

vendita, di cessione o di trasloco, assicurarsi

che resti insieme all’apparecchio.

Leggere attentamente le istruzioni: ci sono

importanti informazioni sull’installazione, sull’uso

e sulla sicurezza.

Questo apparecchio è progettato per l’uso

domestico o per applicazioni simili, ad esempio:

- case coloniche;

- utilizzo da parte di clienti in hotel, motel ed altri

ambienti di tipo residenziale;

- bed and breakfast.

Disimballare l’apparecchio e controllare che

non abbia subìto danni durante il trasporto. Se

fosse danneggiato non collegarlo e contattare

il rivenditore.

Sicurezza generale

• Questo elettrodomestico può essere utilizzato

da bambini di età non inferiore a 8 anni e

da persone con ridotte capacità fisiche,

sensoriali o mentali, o prive di esperienza

o della necessaria conoscenza, purché

sotto stretta sorveglianza di una persona

responsabile oppure dopo che le stesse

abbiano ricevuto istruzioni relative all’uso

sicuro dell’apparecchio e alla comprensione

dei pericoli ad esso inerenti.

• I bambini non devono giocare con

l’apparecchio.

• La pulizia e la manutenzione dell’apparecchio

deve essere effettuata dall’utilizzatore. Non

deve essere effettuata da bambini senza

sorveglianza.

• L’apparecchio è stato concepito per un

uso di tipo non professionale all’interno

dell’abitazione.

• L’apparecchio deve essere usato per il

lavaggio delle stoviglie a uso domestico

e secondo le istruzioni riportate in questo

libretto.

• L’apparecchio non va installato all’aperto,

nemmeno se lo spazio è riparato, perché è

molto pericoloso lasciarlo esposto a pioggia

e temporali.

• Non toccare la lavastoviglie a piedi nudi.

• Non staccare la spina dalla presa della

corrente tirando il cavo, bensì afferrando la

spina.

• È necessario chiudere il rubinetto dell’acqua

e staccare la spina dalla presa della corrente

alla fine di ogni ciclo e prima di effettuare

operazioni di pulizia e manutenzione.

• Il numero massimo di coperti è indicato nella

scheda prodotto.

• In caso di guasto, in nessun caso accedere

ai meccanismi interni per tentare una

riparazione.

• Non appoggiarsi o sedersi sulla porta aperta:

l’apparecchio potrebbe ribaltarsi.

• La porta non deve essere tenuta nella

posizione aperta perchè può rappresentare

il pericolo di inciampare.

• Tenere il detersivo e il brillantante fuori dalla

portata dei bambini.

• Gli imballaggi non sono giocattoli per

bambini.

• I coltelli e gli utensili con bordi affilati devono

essere sistemati con le punte/lame rivolte

verso il basso nel cestino posate o posti

in posizione orizzontale sulle ribaltine o

nel vassoio/terzo cesto nei modelli in cui è

presente.

• L’apparecchio deve essere connesso alla

rete idrica collegando il nuovo tubo di carico

e il vecchio tubo di carico non deve essere

riutilizzato

Se la lavastoviglie è a libera installazione, il

lato posteriore della stessa deve essere posto

contro un muro.

Smaltimento

• Smaltimento del materiale di imballaggio:

attenersi alle norme locali, così gli imballaggi

potranno essere riutilizzati.

• La direttiva Europea 2012/19/EU sui rifiuti di

apparecchiature elettriche ed elettroniche

(RAEE), prevede che gli elettrodomestici non

debbano essere smaltiti nel normale flusso

dei rifiuti solidi urbani. Gli apparecchi dismessi

devono essere raccolti separatamente per

ottimizzare il tasso di recupero e riciclaggio

dei materiali che li compongono ed impedire

potenziali danni per la salute e l’ambiente. Il

simbolo del cestino barrato è riportato su tutti

i prodotti per ricordare gli obblighi di raccolta

separata.

Quando si acquista una nuova apparecchiatura

equivalente si può consegnare il RAEE

al negoziante, che è tenuto a ritirarlo

gratuitamente; i RAEE di “piccolissime

dimensioni” (nessun lato sopra i 25 cm)

possono essre consegnati gratuitamente

ai negozianti anche se non si acquista nulla

(solo nei negozi con superficie di vendita

superiore a 400 mq).

Per ulteriori informazioni, sulla corretta

dismissione degli elettrodomestici, i detentori

potranno rivolgersi al servizio pubblico

preposto o ai rivenditori.

Risparmiare e rispettare l’ambiente

Risparmiare acqua ed energia

• Avviare la lavastoviglie solo a pieno carico. In

attesa che la macchina sia piena, prevenire i

cattivi odori con il ciclo Ammollo

(dove disponibile

- vedi Programmi)

• Selezionare un programma adatto al tipo di

stoviglie e al grado di sporco consultando la

Tabella dei programmi:

- per stoviglie normalmente sporche utilizzare

il programma Eco, che garantisce bassi

consumi energetici e di acqua.

- se il carico è ridotto attivare l’opzione Mezzo

carico

(dove disponibile vedi Programmi Speciali ed

Opzioni).

• Se il proprio contratto di erogazione

dell’energia elettrica prevede fasce orarie

di risparmio energetico, effettuare i lavaggi

negli orari a tariffa ridotta. L’opzione Partenza

Ritardata può aiutare a organizzare i lavaggi

in tal senso

(

dove disponibile vedi Programmi Speciali

ed Opzioni).

Product Fiche

Brand

ARISTON

Model

LFF 8S112

Rated capacity in standard place settings (1)

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)

A+

Energy consumption per year in kWh (2)

302.0

Energy consumption of the standard cleaning cycle in kWh

1.07

Power consumption of the off-mode in W

0.5

Power consumption of the left-on mode in W

5.0

Water consumption per year in litres (3)

3080.0

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)

Programme time for standard cleaning cycle in minutes

195’

The duration of the left-on mode in minutes

Noise in dB(A) Re 1pW

Built-in model

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled

tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle

corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy consumption

depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Product Data (product fiche)

Ficha producto

Marca

ARISTON

Modelo

LFF 8S112

Capacidad nominal en número de cubiertos estándar (1)

Clase de eciencia energética sobre una escala de A+++ (bajo consumo) a D (alto consumo)

A+

Consumo energético anual en kWh (2)

302.0

Consumo energético del ciclo de lavado estándar en kWh

1.07

Consumo de potencia en el modo apagado en W

0.5

Consumo de potencia en el modo espera en W

5.0

Consumo de agua anual en litros (3)

3080.0

Clase de ecacia de secado sobre una escala de G (ecacia mínima) a A (ecacia máxima)

Duración del programa por ciclo de lavado estándar en minutos

195’

Duración del modo espera en minutos

Nivel de ruido en dB(A) re 1 pW

Modelo de encastre

NOTAS

1) La información contenida en la etiqueta y la cha se reere al ciclo estándar de lavado, este programa está diseñado para lavar

normalmente vajillas manchadas y es el programa más eciente en términos de consumo combinado de agua y energía. El ciclo

estándar de lavado se corresponde con el ciclo Eco.

2) Basado en 280 ciclos de lavado estándar con agua fría y consumo de modos de bajo consumo energético. El consumo actual

dependerá de cómo se utilice el aparato.

3) Basado en 280 ciclos de lavado estándar. El consumo actual de agua depende de cómo se utilice el aparato.

Ficha producto

Ficha de produto

Marca

ARISTON

Modelo

LFF 8S112

Capacidade nominal, em serviços de louça-padrão (1)

Classe de eciência energética numa escala de A+++ (baixos consumos) a D (altos consumos)

A+

Consumo de energia anual em kWh (2)

302.0

Consumo de energia do ciclo de lavagem normal em kWh

1.07

Consumo, em termos de potência, em estado de desactivação em (W)

0.5

Consumo, em termos de potência, em estado inactivo em (W)

5.0

Consumo de água anual em litros (3)

3080.0

Classe de ecácia de secagem numa escala da G (ecácia miníma) a A (ecácia máxima)

Duração do programa para o ciclo de lavagem normal, em minutos 5)

195’

Duração do estado inactivo expressa em minutos 6)

Emissão de ruído aéreo expressa em dB(A) re 1 pW7)

Produto de encastre

Não

1) A informação constante na etiqueta e na tabela de características fazem referência ao programa normal de lavagem, este

programa é adequado a lavar louça com um grau de sugidade normal e é o programa mais efeciente em termos de consumo

combianado de energia e água.

2) Baseado em 280 ciclos de lavagem normal com enchimento a água fria e no consumo dos modos de baixo consumo de

energia. O consumo real de energia dependerá das condições de utilização do aparelho.

3) Baseado em 280 ciclos de lavagem normal. O valor real do consumo de água dependerá do modo de utilização do aparelho.

Scheda prodotto

Marchio

ARISTON

Modello

LFF 8S112

Capacità nominale in numero di coperti standard (1)

Classe di efcienza energetica su una scala da A+++ (bassi consumi) a D (alti consumi)

A+

Consumo energetico annuo in kWh (2)

302.0

Consumo energetico del ciclo di lavaggio standard in kWh

1.07

Consumo di potenza nel modo spento in W

0.5

Consumo di potenza nel modo lasciato acceso in W

5.0

Consumo di acqua annuo in litri (3)

3080.0

Classe di efcacia di asciugatura su una scala da G (efcacia minima) ad A (efcacia massima)

Durata del programma per il ciclo di lavaggio standard in minuti

195’

Durata del modo lasciato acceso in minuti

Rumore in dB(A) re 1 pW

Prodotto da incasso

NOTE

1) L’informazione sull’etichetta e sulla scheda fanno riferimento al programma standard di lavaggio, questo programma è adatto per

lavare stoviglie che presentano un grado di sporco normale ed è il programma più efciente in termini di consumo combinato di energia

ed acqua. Il ciclo standard corrisponde al ciclo ECO.

2) Consumo di energia basato su 280 cicli annui standard con acqua caricata fredda e sui consumi in modo di spento o di lasciato

acceso dopo la ne ciclo. Il consumo effettivo dipende da come viene usato l’elettrodomestico.

3) Basato su 280 cicli di lavaggio standard. Il consumo effettivo dipende dalle modalità di utilizzo dell’apparecchio.

Scheda prodotto

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the

Troubleshooting guide

(see Troubleshooting).

• Restart the programme to check whether the problem has

ceased to exist.

• If the problem persists, contact the Authorised Technical

Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• The type of malfunction.

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the appliance data plate

(see Description of the appliance)

Assistenza

Prima di contattare l’Assistenza:

• Verificare se l’anomalia può essere risolta da soli

(vedi Anomalie

e Rimedi)

• Riavviare il programma per controllare se l’inconveniente è stato

ovviato.

• In caso negativo, contattare il Servizio Assistenza Tecnica

Autorizzato.

Non ricorrere mai a tecnici non autorizzati.

Comunicare:

• il tipo di anomalia;

• il modello della macchina (Mod.);

• il numero di serie (S/N).

Queste informazioni si trovano sulla targhetta caratteristiche posta

sull’apparecchio

(vedi Descrizione dell’apparecchio).

Asistencia Técnica

Antes de llamar al Servicio de Asistencia Técnica:

• Verifique si la anomalía puede ser resuelta por Ud.

mismo

(ver Anomalías y Soluciones).

• Vuelva a poner en funcionamiento el programa para

controlar si el inconveniente ha sido resuelto.

• Si no es así, llame al Servicio de Asistencia Técnica

Autorizado.

No llame nunca a técnicos no autorizados.

Comunique:

• el tipo de anomalía;

• el modelo de la máquina (Mod.);

• y el número de serie (S/N).

Esta información se encuentra en la placa de características

ubicada en el aparato

(ver Descripción del aparato).

Assistência

Antes de contactar a Assistência:

• Verifique se pode resolver sozinho a anomalia

(veja

Anomalias e Soluções).

• Reinicie o programa para controlar se o inconveniente

foi resolvido.

• Em caso negativo, contacte o Serviço de Assistência

Técnica Autorizado.

Nunca recorra a técnicos não autorizados.

Comunique:

• o tipo de defeito;

• o modelo da máquina (Mod.);

• o número de série (S/N).

Estas informações encontram-se na placa de identificação

situada no aparelho

(veja Descrição do Aparelho)

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto

its back.

Connecting the water supply

Adaptation of the water supply for installation should only

be performed by a qualified technician.

The water inlet and outlet hoses may be positioned towards

the right or the left in order to achieve the best possible

installation.

Make sure the dishwasher does not bend or squash the

hoses.

Connecting the water inlet hose

• To a 3/4” gas cold or hot water connection point (max.

60°C).

• Run the water until it is perfectly clear.

• Screw the inlet hose tightly into position and turn off the

tap.

If the inlet hose is not long enough, contact a specialist

store or an authorised technician

(see Assistance)

The water pressure must be within the values indicated

in the Technical Data table - otherwise the dishwasher may

be function properly.

Make sure the hose is not bent or compressed.

Connecting the water outlet hose

Connect the outlet hose to a drain duct with a minimum

diameter of 2 cm. (A)

The outlet hose connection must be at a height ranging from

40 to 80 cm from the floor or surface where the dishwasher

rests.

Before connecting the water outlet hose to the sink drain,

remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water

supply in the event of anomalies or leaks from inside the

appliance.

Some models are also equipped with the supplementary

safety device New Acqua Stop*, which guarantees anti-

flooding protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstances should the water inlet hose be cut

as it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make

sure that:

• The socket is earthed and complies with current

regulations;

• the socket can withstand the maximum load of the

appliance as shown on the data plate located on the inside

of the door

(see chapter Description of the appliance);

• The power supply voltage falls within the values indicated

on the data plate on the inside of the door.

• The socket is compatible with the plug of the appliance. If

this is not the case, ask an authorised technician to replace

the plug (

see Assistance

). Do not use extension cables or

multiple sockets.

Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced

by the manufacturer or its authorised Technical Assistance

Service in order to prevent all potential hazards.

(See

Assistance)

The Company shall not be held responsible for any

incidents, if these regulations are not observed.

Positioning and levelling

1. Position the dishwasher on a level sturdy floor. If the floor is

uneven, the front feet of the appliance may be adjusted until

it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move

or cause vibrations and noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive

transparent strip* under the wooden shelf in order to protect

it from any condensation which may form.

3. Place the dishwasher so that its sides or back panel are in

contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop*

(see the

Assembly instruction sheet)

4*. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher

using a hexagonal spanner with an opening of 8 mm. Turn the

spanner in a clockwise direction to increase the height and

in an anticlockwise direction to decrease it.

(see Building-in

instruction sheet attached to the documentation)

Installation

MIN 40 cm

MAX 80 cm

* Only available in selected models.

Advice regarding the first wash cycle

After the installation, remove the stoppers from the racks and

the retaining elastic elements from the upper rack

(if any).

Water softener settings

Before starting the first wash cycle, set the hardness lev-

el of the water from the mains supply.

(see chapter Rinse

aid and refined salt).

First load the softener tank with water, then introduce about

1 kg of salt. It is perfectly normal for water to flow out.

As soon as this procedure is complete, run a wash cycle.

Only use salt that has been specifically designed for dish-

washers.

After the salt has been poured into the machine, the LOW

SALT indicator light* switches off.

If the salt container is not filled, the water softener and

the heating element may be damaged as a result.

Technical data

Dimensions

width 60 cm

height 85 cm

depth 60 cm

Capacity 15 standard place-settings

Water supply pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 psi – 145 psi

Power supply voltage See appliance data plate

Total absorbed power See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/ CE Waste Electrical

and Electronic Equipment (WEEE)

* Only available in selected models.

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display* provides useful information concerning the

type of wash cycle, drying/wash-cycle phase, remaining

time, temperature etc.

Description of the

appliance

The number and type of wash cycles and options may vary depending on the dishwasher model.

Overall view

Wash-cycle indicator lights

Zone Wash indicator lights

Low Rinse-Aid indicator light

Low Salt indicator light

Blocked Filter indicator light

Extra Drying indicator light

Multi-Functional Tablets indicator light (Tabs)

Washing and Drying indicator lights

Tap Shut-Off indicator light

Delayed Start indicator light

Short Time indicator light

Remaining Time indicator

Display

Control panel

Short Time

Option button

Start/Pause

button and

indicator lights

Button and

indicator light

On-Off/Reset

Extra Drying option button

Zone Wash option button

Delayed Start

buttons

Multi-functional Tablets

option button (Tabs)

Display

Wash-Cycle Selection buttons

1. Upper rack

2. Upper sprayer arm

3. Tip-up dispensers

4. Rack height adjuster

5. Third rack*

6. Lower rack

7. Lower sprayer arm

8. Washing filter

9. Salt dispenser

10. Detergent and rinse-aid dispensers

11. Data plate

12. Control panel****

Refined Salt and Rinse Aid

* Only available in selected models.

Only use products which have been specifically designed

for dishwashers. Do not use table salt or industrial salt.

Follow the instructions given on the packaging.

If you are using a multi-function product, we recommend

that you add salt in any case, especially if the water is hard

or very hard.

(Follow the instructions given on the packaging.)

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID* indicator lights will remain lit.

Measuring out the refined salt

The use of salt prevents the formation of LIMESCALE on the

dishes and on the machine's functional components.

• It is important that the salt dispenser be never empty.

• It is important to set the water hardness.

The salt dispenser is located in the lower part of the dishwasher

(see Description)

and should be filled:

• When the LOW RINSE AID indicator light in the control panel

is lit *;

• When the green float* on the cap of the salt dispenser is no

longer visible.

• See autonomy in the water hardness table.

1. Remove the lower rack and unscrew the

container cap (anticlockwise).

2. Only the first time you do this: fill the water

dispenser up to the edge.

3. Position the funnel

(see figure)

and

fill the salt container right up to its edge

(approximately 1 kg); it is not unusual for a

little water to leak out.

4. Remove the funnel and wipe any salt residue away from the

opening; rinse the cap under running water and then screw it on.

It is advisable to perform this procedure every time you add salt

to the container.

Make sure the cap is screwed on tightly, so that no detergent can

get into the container during the wash cycle (this could damage

the water softener beyond repair).

Whenever you need to add salt, we recommend carrying out

the procedure before the washing cycle is started.

Setting the water hardness

For perfect water softener operation, it is essential that the

adjustment be based on the water hardness in your house. Ask

your local water supplier for this information. The factory setting

is for medium water hardness.

• Switch the dishwasher on using the On/Off button.

• Switch it off using the On/Off button

• Hold down the START/PAUSE button

for 5 seconds until

you hear a beep.

• Switch it on using the On/Off button

• The display shows the current selection level number and the

salt indicator light.

• Press button ECO to select the desired hardness level

(see

Hardness Table).

• Switch it off using the On/Off button

• Setting is complete!

Even if using multi-functional tablets, the salt dispenser should

still be filled.

(°dH = hardness measured in German degrees - °f = hardness

measured in French degrees – mmol/l = millimoles per litre)

Measuring out the rinse aid

Rinse aid makes dish DRYING easier. The rinse aid dispenser

should be filled:

• When the LOW RINSE AID indicator light on the panel/display

is lit *;

• When the dark optical indicator* on the dispenser door “D”

becomes transparent.

1. Open the dispenser “D” by pressing and pulling up the tab

on the lid;

2. Carefully introduce the rinse aid as far as the maximum

reference notch in the filling space - avoid spilling it. If this

happens, clean the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

may want to adjust the quantity of rinse aid used.

• Switch the dishwasher on using the On/Off button.

• Switch it off using the On/Off button

• Press the START/PAUSE button

3 times - a beep will be

heard.

• Switch it on using the On/Off button

• The display shows the current selection level and the rinse aid

indicator light.

• Press button ECO to select the level of rinse aid quantity to be

supplied.

• Switch it off using the On/Off button

• Setting is complete!

If the rinse aid level is set to ZERO, the rinse aid will not be

supplied and the low rinse aid indicator light will not be lit if you

run out of it.

A maximum of 4 levels can be set according to the dishwasher

model. The factory setting is for a medium level.

• If you see bluish streaks on the dishes, set a low number (1-2).

• If there are drops of water or limescale marks on the dishes,

set a high number (3-4).

Water Hardness Table

Average autonomy

salt dispenser with 1

wash cycle per day

level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1.1 - 2 5 months

3 12 - 17 21 - 30 2.1 - 3 3 months

4 17 - 34 31 - 60 3.1 - 6 2 months

34 - 50 61 - 90 6.1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the use

of salt. A setting of 5 may increase cycle duration.

Loading the racks

Tips

Before loading the racks, remove all food residues from the

crockery and empty liquids from glasses and containers. No

preventive rinsing is needed under running water.

Arrange the crockery so that it is held in place firmly and does

not tip over; and arrange the containers with the openings facing

downwards and the concave/convex parts placed obliquely,

thus allowing the water to reach every surface and flow freely.

Make sure that the lids, handles, trays and frying pans do not

prevent the sprayer arms from rotating. Place any small items

in the cutlery basket.

Since plastic dishes and non-stick frying pans usually retain more

water drops, their drying will be not so good as that of ceramic

or stainless-steel dishes.

Lightweight items such as plastic containers should be placed

in the upper rack and arranged so that they cannot move.

After loading the appliance, make sure that the sprayer arms

can rotate freely.

Lower rack

The lower rack can hold pans, lids, dishes, salad bowls, cutlery

etc. Large plates and lids should ideally be placed at the sides.

Very soiled dishes and pans should be placed in the lower rack

because in this sector the water sprays are stronger and allow

a higher washing performance.

Some models are

equipped with Vertical

Zone, special pull-out

supports*in the rear of

the rack that can be used

to support frying pans

and baking pans in a

more vertical position,

thus taking up less space.

In order to use it, just get

hold of the coloured grip

and pull it upwards while

rotating it forward. The supports can slide right and left to fit the

size of the crockery.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging dishes

or in a horizontal position (lower) to load pans and salad bowls

easily.

Upper rack

Load this rack with delicate and lightweight crockery such as

glasses, cups, saucers and shallow salad bowls.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging tea/

dessert saucers or in a lower position to load bowls and food

containers.

Tip-up compartments with adjustable position*

The side tip-up compartments can be positioned at three different

heights to optimize the arrangement of crockery inside the rack.

Wine glasses can be placed safely in the tip-up compartments

by inserting the stem of each glass into the corresponding slots.

For optimum drying results incline

the tip-up compartments more. To

change the inclination, pull up the

tip-up compartment, slide it slightly

and position it as you wish.

Wine glasses can be placed safely in the tip-up compartments

by inserting the stem of each glass into the corresponding slots.

*Only available in selected models with different numbers and

positions.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack

may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE

RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

If the rack is equipped with a Lift-Up

device*

(see figure)

, lift

it up by holding its sides. To restore the lower position, press

the levers (A) at the sides of the rack and follow the rack down.

The upper rack cannot be used in the high position and

with the tip-up compartments closed in a vertical position.

Third rack

The third rack was designed to house the cutlery. Arrange the

cutlery as shown in the figure.

A separate arrangement of the cutlery makes collection easier

after washing and improves washing and drying performance.

“Knives and other utensils with sharp edges must be

positioned with the blades facing downwards.”

The upper rack can be adjusted for height based on requirements:

high position to place bulky crockery in the lower rack and low

position to make the most of the tip-up compartments/sectors

by creating more space upwards.

Unsuitable crockery

• Wooden crockery and cutlery.

• Delicate decorated glasses, artistic handicraft and antique

crockery. Their decorations are not resistant.

• Parts in synthetic material which do not withstand high

temperatures.

• Copper and tin crockery.

• Crockery soiled with ash, wax, lubricating grease or ink.

The colours of glass decorations and aluminium/silver pieces can

change and fade during the washing process. Some types of

glass (e.g. crystal objects) can become opaque after a number

of wash cycles too.

Damage to glass and crockery

Caused by:

• Type of glass and glass production process.

• Chemical composition of detergent.

• Water temperature of rinse cycle.

Tips:

• Only use glasses and porcelain guaranteed by the

manufacturer as dishwasher safe.

• Use a delicate detergent suitable for crockery.

• Collect glasses and cutlery from the dishwasher as soon as

the wash cycle is over.

The geometry of the rack makes it possible to place such small

items as coffee cups in the area in the middle.

The third basket is equipped with two sliding side trays to make

the most of the height of the space below.

* Only available in selected models.

Detergent and

dishwasher use

* Only available in selected models.

Measuring out the detergent

A good wash result also depends on the correct

amount of detergent being used. Exceeding the stated

amount does not result in a more effective wash and

increases environmental pollution.

Based on how soiled the items are, the amount can be

adjusted to individual cases using powder or liquid

detergent.

In the case of normally soiled items, use approximately either

35 gr (powder detergent) or 35 ml (liquid detergent). If tablets

are used, one tablet will be enough.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce

the amount of detergent used accordingly.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers.

To open the detergent dispenser use the opening device “A”.

Introduce the detergent into the dry dispenser “B” only.

Place the amount of detergent for pre-washing directly

inside the tub.

1. When measuring out the detergent refer to the Table of wash

cycles to add the proper quantity. Compartment B comprises a

level showing the maximum quantity of liquid or powder detergent

that can be added to each cycle.

2. Remove detergent residues from the edges of the dispenser

and close the cover until it clicks.

3. Close the lid of the detergent dispenser by pulling it up until

the closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the wash cycle.

If all-in-one detergents are used, we recommend using the TABS

option, because it adjusts the cycle so that the best washing and

drying results are always achieved.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residues

remaining in the machine after the cycle has ended.

To achieve the best washing and drying results, the combined

use of detergent, rinse aid liquid and refined salt is required.

We recommend using detergents that do not contain

phosphates or chlorine, as these products are

harmful to the environment.

Starting the dishwasher

1. Turn the water tap on.

2. Press the ON/OFF button: The ON/OFF indicator light and the

display light up.

3. Open the door and pour in a suitable amount of detergent

(see below).

4. Load the racks

(see Loading the racks)

and shut the door.

5. Select the wash cycle in accordance with the type of crockery

and its soil level

(see Table of wash cycles)

by pressing the

wash-cycle selection buttons.

6. Select the wash options*

(see adjacent information).

7. Start the cycle by pressing the Start/Pause button: The wash

indicator light comes on and the time left to the end of the cycle

appears on the display.

8. At the end of the cycle, the display shows END. Switch off the

appliance by pressing the ON/OFF button, shut off the water tap

and unplug the appliance from the electricity socket.

9. Wait for a few minutes before removing the crockery in order

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during long

periods of inactivity in order to minimise electricity

consumption.

AUTO WASH CYCLES*:some dishwasher models are

equipped with a special sensor which can be used to assess

the level of soiling and automatically select the most efficient and

economical wash cycle accordingly. The duration of the auto

wash cycles may vary due to the operation of the sensor.

Changing a wash cycle in progress

If a mistake was made in the wash cycle selection process, it is

possible to change the cycle provided that it has only just begun:

once the wash cycle has started, in order to change the wash

cycle switch off the machine by pressing and holding the ON/

OFF/Reset button. Switch it back on using the same button and

select the desired wash cycle and options.

Adding extra crockery

Press the Start/Pause button and open the door, taking care to

avoid the escaping steam, and place the crockery inside the

dishwasher. Press the Start/Pause button: The cycle will start

again after a long beep has been emitted.

If the delayed start has been set, at the end of the countdown

the wash cycle will not start. It will stay in Pause mode.

Press the Start/Pause button to pause the machine; the wash

cycle is stopped.

At this stage it is not possible to change the wash cycle.

Accidental interruptions

If the door is opened during the wash cycle or there is a power

cut, the cycle stops. It starts again from the point at which it

was interrupted once the door has been shut or the electricity

supply is restored.

Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.

Based on the different conditions of use, the wash-cycle duration and data can change.

The number and type of wash cycles and options may vary depending on the dishwasher model.

Wash cycles

Wash cycle

which

include

drying

Options

Approximate

duration of

wash cycles

Water

consumption

(l/cycle)

Energy

consumption

(KWh/cycle)

Eco Yes Delayed start – Tabs – Extra Dry 03:15’ 11 1,07

Auto Intensive Yes

Delayed start – Tabs – Extra Dry –

Short Time – Zone wash

02:00’ - 03:10’ 15,5 - 17,0 1,6 - 1,85

Auto Normal Yes

Delayed start – Tabs – Extra Dry –

Short Time – Zone wash

01:30’ - 02:30’ 15,0 – 16,5 1,30 - 1,45

Auto Fast No Delayed start – Tabs 00:40’ - 01:20’ 13,0 - 14,5 1,20- 1,30

Trio Wash Yes

Delayed start – Tabs – Extra Dry –

Short Time

02:00’ 18,0 1,4

Delicate Yes Delayed start – Tabs – Extra Dry 01:40’ 11,5 1,2

Express 30’ No Delayed start – Tabs 00:30’ 9,0 0,55

Soak No Delayed start 00:12’ 4,5 0,01

Instructions on wash-cycle selection and detergent dosage

1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal

soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery. 32 gr/ml + 6 gr/ml** – 1

Tab (**Quantity of pre-washing detergent)

2. Heavily soiled dishes and pans (not to be used for delicate items). 38 gr/ml – 1 Tab

3. Normally soiled pans and dishes. 32 gr/ml + 6 gr/ml** – 1 Tab

4. Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab

5. Wash spread over the two/three* racks: normal in the upper rack and third rack for cutlery and glasses, heavy-duty in sauce-

pans in the lower rack. 38 gr/ml – 1 Tab

6. Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab

7. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab

8. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W.

Special wash cycles

and Options

* Only available in selected models.

Extra drying

To improve the dryness level of the crockery, press

the EXTRA DRYING button and the symbol will light up. If it

is pressed again, the option will be deselected.

A higher temperature during the final rinsing and a longer

drying phase improve the dryness level.

The EXTRA DRYING option increases the duration of

the wash cycle.

Delayed start

It is possible to delay the start time of the cycle for

a period of time between 1 and 24 hours:

1. Select the desired wash cycle and any other options

required, press the DELAYED START button. The relevant

symbol starts flashing. Use the buttons + and - to select when

the wash cycle will start (h01, h02 etc.)

2. Confirm with the START/PAUSE button. The symbol stops

flashing and the countdown begins.

3. Once this time has elapsed, the DELAYED START symbol

switches off and the wash cycle begins.

To deselect the DELAYED START option, press the DELAYED

START button until the text OFF

appears.

The Delayed Start function cannot be set once a wash

cycle has been started.

Wash options*

The OPTIONS may only be set, changed or reset after the

wash cycle has been selected and before the Start/Pause

button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

(see Table of wash cycles)

, the

corresponding symbol flashes rapidly 3 times.

If an option is selected which is not compatible with another

(previously selected) option, it will flash 3 times and switch

off, while the most recently selected option will remain active.

To deselect an option which has been set by mistake, press

the corresponding button again.

Multi-functional tablets* (Tabs)

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI-

FUNCTIONAL TABLETS button; the corresponding symbol

will light up. If the button is pressed again, the option will be

deselected.

The “Multi-functional tablets” option results in a

longer wash cycle.

The use of tablets is only recommended for models

having this option and it is not recommended with wash

cycles which do not specify the use of multi-functional

tablets.

Notes:

Optimum performance levels when using the “Fast" and "Express

30’” cycles can be achieved by respecting the specified number

of place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Note for Test Laboratories: for information on comparative EN

testing conditions, please send an email to the following address:

Short Time option

This option can be used to reduce the duration of the

main wash cycles while maintaining the same washing and

drying performance levels.

After selecting the wash cycle, press the Short Time option but-

ton;

To deselect the option, press the same button again.

Zone Wash

This option makes it possible to carry out the wash

cycle in the selected rack only. Select the wash cycle and

then press the ZONE WASH button: the selected rack lights

up and the wash cycle starts in the selected rack only. Press

the button again to deselect the option.

The option is available with the following wash cycles:

Intensive and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVE ZONE washing. This wash cycle is ideal

for very soiled mixed loads, e.g. pans and saucepans,

dishes with heavy encrustation or difficult-to-clean crockery

(grater, vegetable mill, dirty cutlery). The spraying pressure is

stronger and the washing temperature higher, thus ensuring

optimum handling of stubborn stains.

Select the option and the Normal cycle to start the SAVING

ZONE washing. This function makes it possible to reduce

energy consumption. Cycle duration might change.

Remember to load the crockery in the selected rack only

[email protected]

Care and maintenance

Shutting off the water and electricity

supplies

• Turn off the water tap after every wash cycle to avoid leaks.

• Always unplug the appliance when cleaning it and when

performing maintenance work.

Cleaning the dishwasher

• The external surfaces of the machine and the control panel

can be cleaned using a non-abrasive cloth which has been

dampened with water. Do not use solvents or abrasive

products.

• Any marks on the inside of the appliance may be removed

using a cloth dampened with water and a little vinegar.

Preventing unpleasant odours

• Always keep the door of the appliance ajar in order to avoid

moisture from forming and being trapped inside the machine.

• Clean the seals around the door and detergent dispensers

regularly using a damp sponge. This will avoid food becoming

trapped in the seals, which is the main cause behind the

formation of unpleasant odours.

Cleaning the sprayer arms

Food residue may become encrusted onto the sprayer arms

and block the holes used to spray the water. It is therefore

recommended that you check the arms from time to time and

clean them with a small non-metallic brush.

The two sprayer arms may both be removed.

To remove the upper sprayer arm,

turn the plastic locking ring in an

anti-clockwise direction. The upper

sprayer arm should be replaced

so that the side with the greater

number of holes is facing upwards.

The lower sprayer arm can be

removed by pressing on the side

tabs and pulling it upwards.

Cleaning the water inlet filter*

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free

of impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked

and damage the dishwasher.

Clean the water inlet filter at the tap outlet regularly.

- Turn off the water tap.

- Unscrew the end of the water inlet hose, remove the filter and

clean it carefully under running water.

- Re-place the filter and screw the water hose back into position.

Cleaning the filters

The filter assembly consists of three filters which remove food

residues from the washing water and then recirculate the water.

They should be cleaned if you wish to achieve the best results

in every wash.

Clean the filters regularly.

The dishwasher should not be used without filters or if the

filter is loose.

• After several washes, check the filter assembly and if necessary

clean it thoroughly under running water, using a non-metallic

brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and

pull it out

(fig. 1).

2. Remove the cup filter B by exerting a slight pressure on the

side flaps

(fig. 2);

3. Slide out the stainless-steel plate filter A.

(fig. 3).

4. Inspect the trap and remove any food residues. NEVER

REMOVE the wash-cycle pump protection

(black detail) (fig.4).

After cleaning the filters, re-place the filter assembly and fix it in

position correctly; this is essential for maintaining the efficient

operation of the dishwasher.

Leaving the machine unused for extended

periods

• Disconnect the appliance from the electricity supply and shut

off the water tap.

• Leave the door of the appliance ajar.

• When you return, run a wash cycle when the dishwasher is

empty.

* Only available in selected models.

Troubleshooting

Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.

* Only available in selected models.

Problem: Possible causes / Solutions:

The dishwasher does not start

or cannot be controlled.

• The water supply tap is not turned on.

• Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately

one minute and reset the wash cycle.

• The appliance has not been plugged in properly or another electricity socket should be used.

• The dishwasher door has not been closed properly.

The door won’t close.

• Make sure that the racks were inserted all the way.

• The lock was released. Strongly push the door until a “clacking” noise is heard.

No water drain out of the

dishwasher.

• The wash cycle has not nished yet.

• The water drain hose is bent

(see Installation).

• The drain duct is clogged up.

• The lter is clogged up with food residues.

• Check the height of the drain hose.

The dishwasher makes

excessive noise.

• The dishes are rattling against each other or against the sprayer arms. Place the dishes

properly and make sure the sprayer arms can rotate freely.

• Too much foam: the detergent has not been measured out correctly or it is not suitable for use

in dishwashers.

(See Detergent and dishwasher use.)

Do not prewash the dishes by hand.

The dishes and glasses are

covered in a white lm or

limescale deposits.

• No rened salt.

• Water hardness adjustment is not suitable: increase the relevant values.

(See Rened Salt

and Rinse Aid.)

• The salt and rinse-aid dispenser cap has not been closed properly.

• The rinse aid has been used up or the dosage is too low.

The dishes and glasses are

streaked or have a bluish

tinge.

• The rinse aid dosage is too high.

The crockery has not been

dried properly.

• A wash cycle without a drying programme has been selected.

• The rinse aid has been used up.

(See Rened Salt and Rinse Aid.)

• The rinse aid dispenser setting is not suitable.

• The crockery is made from non-stick material or plastic; the presence of water drops is

normal.

The dishes are not clean. • The crockery has not been arranged properly.

• The sprayer arms cannot rotate freely, being hindered by the dishes.

• The wash cycle is too gentle

(see Wash Cycles).

• Too much foam: the detergent has not been measured out correctly or it is not suitable for use

in dishwashers.

(See Detergent and dishwasher use.)

• The lid on the rinse aid compartment has not been closed correctly.

• The lter is dirty or clogged up

(see Care and maintenance.)

• The rened salt level is low

(See Rened Salt and Rinse Aid.)

• Make sure that the height of the dishes is compatible with the rack adjustment.

• The holes in the sprayer arms are clogged up.

(See Care and maintenance.)

The dishwasher won’t load

any water.

It is blocked with ashing lights.

• There is no water in the mains supply or the tap is shut off.

• The water inlet hose is bent

(see Installation).

• The lters are clogged up: they need cleaning.

(See Care and maintenance.)

• The drain duct is clogged up: it needs cleaning.

• After checking and cleaning, switch the dishwasher on and off and start a new wash cycle.

• If the problem persists, turn off the water tap, remove the plug and call the Service Centre.

La pagina sta caricando ...

Ariston LFF 8S112 X AG Guida utente

Marca: Ariston

Modello: LFF 8S112 X AG

Categoria: Lavastoviglie

Tipo: Guida utente

Scarica il pdf

rapporto

Ariston LFF 8S112 X AG Guida utente

Ariston LFF 8S112 X AG Guida utente

Documenti correlati

Altri documenti