Ariston LFF 8M019 X AG Guida utente

Categoria
Lavastoviglie
Tipo
Guida utente
LFF 8M019
EN
English
Operating instructions
DISHWASHER - Contents
Operating instructions,1
Precautions and advice, 2-3
Product Data, 7
Assistance, 9
Installation, 10-11
Description of the appliance, 12
Refined salt and rinse aid, 13
Loading the racks, 14-15
Detergent and dishwasher use, 16
Wash cycles, 17
Special wash cycles and options, 18
Care and maintenance, 19
Troubleshooting, 20
PT
Português
Instruções de uso
MÁQUINA DE LAVAR LOUÇA - Índice
Instruções de uso, 1
Precauções e conselhos, 4-5
Ficha do produto, 8
Assistência, 9
Instalação, 32-33
Descrição do aparelho, 34
Sal, regenerador e abrilhantador, 35
Carregar os cestos, 36-37
Detergente e uso da máquina de lavar louça, 38
Programas, 39
Programas especiais e opções, 40
Manutenção e cuidados, 41
Anomalias e soluções, 42
ES
Español
Manual de instrucciones
LAVAVAJILLAS - Índice
Instrucciones de uso, 1
Precauciones y consejos, 3-4
Ficha producto, 7
Asistencia, 9
Instalación, 21-22
Descripción del aparato, 23
Sal regeneradora y abrillantador, 24
Cargar los cestos, 25-26
Detergente y uso del lavavajillas, 27
Programas, 28
Programas especiales y opciones, 29
Mantenimiento y cuidados, 30
Anomalías y soluciones, 31
IT
Italiano
Istruzioni per l’uso
LAVASTOVIGLIE - Sommario
Istruzioni per l’uso, 1
Precauzioni e Consigli, 5-6
Scheda prodotto, 8
Assistenza, 9
Installazione, 43-44
Descrizione dell’apparecchio,45
Sale Rigenerante e Brillantante, 46
Caricare i cesti, 47-48
Detersivo e uso della lavastoviglie, 49
Programmi, 50
Programmi Speciali ed Opzioni, 51
Manutenzione e cura, 52
Anomalie e rimedi, 53
2
EN
Precautions and advice
This appliance was designed and
manufactured in compliance with international
safety standards. The following information
has been provided for safety reasons and
should be read carefully.
Keep this instruction manual in a safe place
for future reference. If the appliance is sold,
given away or moved, make sure the manual
is kept with the machine.
Read the instructions carefully, as they
include important information on safe
installation, use and maintenance.
This appliance was designed for domestic
use or similar applications, for example:
- farmhouses;
- use by guests in hotels, motels and other
residential settings;
- bed & breakfasts.
Remove the appliance from all packaging
and make sure it was not damaged during
transportation. If it was damaged, contact
the retailer and do not proceed any further
with the installation process.
General safety
This appliance should not be operated
by children younger than 8 years, people
with reduced physical, sensory or mental
capacities, or inexperienced people
who are not familiar with the product,
unless they are given close supervision
or instructions on how to use it safely and
are made aware by a responsible person
of the dangers its use might entail.
Children must not play with the appliance.
It is the user's responsibility to clean and
maintain the appliance. Children should
never clean or maintain it unless they are
given supervision.
The appliance was designed for domestic
use inside the home and is not intended
for commercial or industrial use.
The appliance must be used to wash
domestic crockery in accordance with the
instructions in this manual.
The appliance must not be installed
outdoors, even in covered areas. It is
extremely dangerous to leave the machine
exposed to rain and storms.
Do not touch the appliance when barefoot.
When unplugging the appliance always
pull the plug from the mains socket. Do
not pull on the cable.
The water supply tap must be shut off
and the plug should be removed from
the electrical socket at the end of every
cycle and before cleaning the appliance
or carrying out any maintenance work.
The maximum number of place settings is
shown in the product sheet.
If the appliance breaks down, do not under
any circumstances touch the internal parts
in an attempt to perform the repair work
yourself.
Do not lean or sit on the open door: this
may cause the appliance to overturn.
The door should not be left open as it may
create a dangerous obstacle.
Keep detergent and rinse aid out of reach
of children.
The packaging material should not be
used as a toy.
Knives and other utensils with sharp
edges must be placed either with the
points/blades facing downwards in the
cutlery basket or horizontally on the tip-up
compartments or in the tray/third basket,
if available.
Connect the appliance to the water mains
using the new supply hose provided with
the appliance. Do not re-use the old hose.
Install the back side of a free-standing
dishwasher against a wall.
Disposal
To dispose of any packaging materials,
follow local legislation so that the
packagings may be reused.
The European Directive 2012/19/EU
relating to Waste Electrical and Electronic
Equipment (WEEE) states that household
appliances should not be disposed of
using the normal solid urban waste cycle.
Exhausted appliances should be collected
separately in order to optimise the cost of
reusing and recycling the materials inside
the machine, while preventing potential
damage to the atmosphere and public
health. The crossed-out dustbin symbol
shown on all products reminds the owners
of their obligations regarding separated
waste collection.
For further information relating to the correct
disposal of household appliances, owners
may contact the relevant public authority or
the local appliance dealer.
3
ES
Precauciones y consejos
El aparato ha sido proyectado y fabricado
en conformidad con las normas internacionales
de seguridad Estas advertencias se
suministran por razones de seguridad y
deben ser leídas atentamente.
Es importante conservar este manual para
poder consultarlo en cualquier momento. En
caso de venta, de cesión o de traslado, el
manual debe permanecer junto al aparato.
Lea atentamente las instrucciones: contienen
información importante sobre la instalación,
sobre el uso y sobre la seguridad.
Este aparato ha sido proyectado para uso
doméstico y para aplicaciones similares, por
ejemplo:
- cortijos;
- uso por parte de clientes en hoteles, moteles
y otros ambientes de tipo residencial;
- bed and breakfast.
Desembalar el aparato y comprobar que no
haya sufrido daños durante el transporte. Si
estuviera dañado, no conectarlo; llamar al
revendedor.
Seguridad general
Este electrodoméstico puede ser utilizado
por niños de no menos de 8 años de
edad y por personas con capacidades
físicas, sensoriales o mentales reducidas, o
carentes de experiencia o del conocimiento
necesario, pero sólo bajo la estricta
vigilancia de una persona responsable,
siguiendo las instrucciones sobre el uso
seguro y después de comprender bien los
peligros inherentes.
Los niños no deben jugar con el aparato.
La limpieza y el mantenimiento del aparato
deben ser efectuados por el usuario.
No deben ser efectuados por niños sin
vigilancia.
El aparato ha sido fabricado para un uso
de tipo no profesional en el interior de una
vivienda.
El aparato debe ser utilizado para el lavado
de vajilla de uso doméstico y según las
instrucciones contenidas en este manual.
El aparato no se debe instalar al aire libre, ni
siquiera si el lugar está protegido, porque
es muy peligroso dejarlo expuesto a la
lluvia o a las tormentas.
No tocar el lavavajillas con los pies
descalzos.
No desconectar la clavija de la toma de
corriente tirando del cable sino sujetando
la clavija.
Es necesario cerrar el grifo de agua y
desconectar la clavija de la toma de
corriente al final de cada ciclo antes
de realizar operaciones de limpieza y
mantenimiento.
El número máximo de cubiertos se indica
en la ficha del producto.
En caso de avería, no acceder nunca a
los mecanismos internos para intentar su
reparación.
No apoyarse ni sentarse sobre la puerta
abierta: el aparato podría voltearse.
La puerta no se debe dejar abierta, ya que
podría causar tropiezos.
Conservar el detergente y el abrillantador
fuera del alcance de los niños.
Los embalajes no son juguetes para los
niños.
Los cuchillos y utensilios con bordes
filosos deben colocarse en el cesto para
cubiertos con las puntas/hojas hacia abajo
o en posición horizontal sobre los cestos
especiales adicionales o en la bandeja o el
tercer cesto en los modelos que lo tienen.
El aparato se debe conectar a la red del
agua utilizando el nuevo tubo de carga. El
tubo de carga anterior no se debe reutilizar.
Si el lavavajillas es de libre instalación, el
Saving energy and respecting the
environment
Saving water and energy
Only begin a wash cycle when the
dishwasher is full. While waiting for the
dishwasher to be filled, prevent unpleasant
odours with the Soak cycle
(if available, see
Wash Cycles).
Select a wash cycle that is suited to the
type of crockery and to the soil level using
the Table of Wash Cycles:
- For dishes with a normal soil level, use
the Eco wash cycle, which guarantees low
energy and water consumption levels.
- If the load is smaller than usual activate
the Half Load option
(see Special wash cycles
and options, if available).
If your electricity supply contract gives
details of electricity-saving time bands, run
the wash cycles when electricity prices are
lower. The Delayed Start option can help
you organise the wash cycles accordingly
(see Special wash cycles and options, if available).
4
lado posterior debe quedar contra una
pared.
Eliminación
Eliminación del material de embalaje:
respetar las normas locales para que los
embalajes puedan ser reutilizados.
La norma Europea 2012/19/EU sobre
residuos de equipos eléctricos y
electrónicos (REEE) establece que los
electrodomésticos no se deben eliminar
de la misma manera que los desechos
sólidos urbanos. Los aparatos eliminados
deben ser recogidos en forma separada
para optimizar la tasa de recuperación
y reciclado de los materiales que los
componen e impedir que provoquen
daños a la salud y el medio ambiente. El
símbolo del cubo tachado se encuentra
en todos los productos para recordar la
obligación de recolección separada.
Para mayor información sobre la correcta
eliminación de los electrodomésticos, los
propietarios podrán dirigirse al servicio
público encargado de la recolección o a
los revendedores.
Ahorrar y respetar el medio ambiente
Ahorrar agua y energía
Poner en funcionamiento el lavavajillas sólo
con plena carga. A la espera de que la
máquina se llene, prevenir los malos olores
con el ciclo Remojo
(si lo hay - ver Programas).
Seleccionar un programa adecuado al
tipo de vajilla y al grado de suciedad
consultando la Tabla de programas:
- para la vajilla con suciedad normal utilizar
el programa Eco, que garantiza un bajo
consumo energético y de agua.
- si la carga es reducida, activar la opción
Media carga
(si la hay - ver Programas especiales
y opciones).
Si el suministro de energía eléctrica prevé
horarios de ahorro energético, realizar los
lavados en los horarios con tarifa reducida.
Para organizar mejor los lavados, puede
ser útil la opción de Arranque diferido
(si la
hay - ver Programas especiales y opciones).
PT
Precauções e conselhos
O aparelho foi projetado e construído
conforme as normas internacionais de
segurança. Estas advertências são
fornecidas por razões de segurança e
devem ser lidas com atenção.
É importante conservar este manual para
poder consultá-lo em qualquer momento.
Em caso de venda, cessão ou mudança,
certifique-se que o mesmo fique junto ao
aparelho.
Ler atentamente as instruções: nelas estão
presentes informações importantes sobre a
instalação, o uso e a segurança.
Este aparelho foi projetado para o uso
doméstico ou para aplicações simples,
como por exemplo:
- casas de férias;
- uso por parte de clientes em hotéis, motéis
e outros ambientes de tipo residencial;
- bed and breakfast.
Desembale o aparelho e controle que não
tenha sofrido danos durante o transporte. Se
estiver danificado, não o acenda e contacte
o revendedor.
Segurança geral
Este eletrodoméstico pode ser utilizado por
crianças com mais de 8 anos e pessoas
com capacidades físicas, sensoriais ou
mentais reduzidas, ou sem experiência e
conhecimentos necessários, desde que
sob rigorosa vigilância de uma pessoa
responsável ou após terem recebido
instruções relativas ao uso seguro do
aparelho e à compreensão dos perigos
associados ao uso.
As crianças não devem brincar com o
aparelho.
A limpeza e manutenção do aparelho
devem ser efetuadas pelo utilizador.
Não deve ser efetuada por crianças sem
vigilância.
O aparelho foi concebido para um uso de
tipo não profissional dentro do ambiente
doméstico.
O aparelho deve ser utilizado para a
lavagem de louças de utilização doméstica,
conforme as instruções escritas neste
manual.
Esta máquina de lavar louça não pode
ser instalada ao ar livre, nem mesmo num
lugar protegido por um telhado: é muito
perigoso deixá-la exposta à chuva e aos
temporais.
Não toque na máquina com os pés
descalços.
Não retire a ficha da tomada de corrente
5
puxando o cabo, mas segure a ficha.
É necessário fechar a torneira da água e
tirar a ficha da tomada da corrente elétrica
no final de cada ciclo, antes de efetuar
operações de limpeza e manutenção.
O número máximo de louças é indicado
na ficha do produto.
Em caso de avarias, jamais aceda aos
mecanismos internos para tentar reparar
sozinho.
Não se apoie nem se sente sobre a porta
aberta: o aparelho pode voltar-se.
A porta não pode ficar aberta para evitar
o perigo de tropeçar.
Mantenha o detergente e o abrilhantador
fora do alcance das crianças.
As embalagens não são brinquedos para
crianças.
As facas e utensílios com rebordos afiados
devem ser colocados com as pontas/
lâminas viradas para baixo no cesto
dos talheres ou em posição horizontal
nas peças basculantes no tabuleiro/
terceiro cesto, nos modelos em que esteja
presente.
O aparelho deve ser ligado à rede hídrica
através do novo tubo de carga e o tubo
de carga antigo não deve ser reutilizado.
Se a máquina de lavar louça for de
instalação livre, o lado traseiro da mesma
deve ser colocado contra uma parede.
Eliminação
Eliminação do material de embalagem:
respeite a normas locais, assim as
embalagens poderão ser reaproveitadas.
A diretiva Europeia 2012/19/EU
relativa aos resíduos de equipamentos
elétricos e eletrónicos (REEE) prevê
que os eletrodomésticos não devem
ser eliminados no normal fluxo dos
resíduos sólidos urbanos. Os aparelhos
em fim de vida devem ser recolhidos
separadamente para otimizar a taxa de
recuperação e reciclagem dos materiais
que os compõem e impedir potenciais
danos à saúde e ao meio ambiente.
O símbolo do cesto do lixo cancelado
está indicado em todos os produtos
para lembrar o dever de coleta seletiva.
Para mais informações sobre a correta
eliminação dos eletrodomésticos, os
proprietários poderão contactar o serviço
de coleta público ou os revendedores.
Economizar e respeitar o ambiente
Economizar água e energia
Use a máquina de lavar louça somente
com carga plena. Enquanto espera que
a máquina fique cheia, previna os maus
cheiros com o ciclo de Amolecimento
(se
disponível - ver Programas)
.
Selecione um programa adequado ao
tipo de louças e ao grau de sujidade
consultando a tabela dos programas:
- para louças normalmente sujas, utilize
o programa Eco, que garante baixos
consumos energéticos e de água.
- se a carga for reduzida, utilize a opção
Meia carga
(se disponível - ver Programas especiais
e opções).
Se o seu contrato de fornecimento de
energia elétrica previr faixas horárias de
economia energética, efetue as lavagens
nos horários com tarifa reduzida. A opção
Início Posterior pode ajudar a organizar
as lavagens nesse sentido
(
se disponível - ver
Programas especiais e opções).
IT
Precauzioni e consigli
L’apparecchio è stato progettato e costruito
in conformità alle norme internazionali di
sicurezza. Queste avvertenze sono fornite per
ragioni di sicurezza e devono essere lette
attentamente.
È importante conservare questo libretto per
poterlo consultare in ogni momento. In caso di
vendita, di cessione o di trasloco, assicurarsi
che resti insieme all’apparecchio.
Leggere attentamente le istruzioni: ci sono
importanti informazioni sull’installazione, sull’uso
e sulla sicurezza.
Questo apparecchio è progettato per l’uso
domestico o per applicazioni simili, ad esempio:
- case coloniche;
- utilizzo da parte di clienti in hotel, motel ed altri
ambienti di tipo residenziale;
- bed and breakfast.
Disimballare l’apparecchio e controllare che
non abbia subìto danni durante il trasporto. Se
fosse danneggiato non collegarlo e contattare
il rivenditore.
Sicurezza generale
Questo elettrodomestico può essere utilizzato
da bambini di età non inferiore a 8 anni e
da persone con ridotte capacità fisiche,
6
sensoriali o mentali, o prive di esperienza
o della necessaria conoscenza, purché
sotto stretta sorveglianza di una persona
responsabile oppure dopo che le stesse
abbiano ricevuto istruzioni relative all’uso
sicuro dell’apparecchio e alla comprensione
dei pericoli ad esso inerenti.
I bambini non devono giocare con
l’apparecchio.
La pulizia e la manutenzione dell’apparecchio
deve essere effettuata dall’utilizzatore. Non
deve essere effettuata da bambini senza
sorveglianza.
L’apparecchio è stato concepito per un
uso di tipo non professionale all’interno
dell’abitazione.
L’apparecchio deve essere usato per il
lavaggio delle stoviglie a uso domestico
e secondo le istruzioni riportate in questo
libretto.
L’apparecchio non va installato all’aperto,
nemmeno se lo spazio è riparato, perché è
molto pericoloso lasciarlo esposto a pioggia
e temporali.
Non toccare la lavastoviglie a piedi nudi.
Non staccare la spina dalla presa della
corrente tirando il cavo, bensì afferrando la
spina.
È necessario chiudere il rubinetto dell’acqua
e staccare la spina dalla presa della corrente
alla fine di ogni ciclo e prima di effettuare
operazioni di pulizia e manutenzione.
Il numero massimo di coperti è indicato nella
scheda prodotto.
In caso di guasto, in nessun caso accedere
ai meccanismi interni per tentare una
riparazione.
Non appoggiarsi o sedersi sulla porta aperta:
l’apparecchio potrebbe ribaltarsi.
La porta non deve essere tenuta nella
posizione aperta perchè può rappresentare
il pericolo di inciampare.
Tenere il detersivo e il brillantante fuori dalla
portata dei bambini.
Gli imballaggi non sono giocattoli per
bambini.
I coltelli e gli utensili con bordi affilati devono
essere sistemati con le punte/lame rivolte
verso il basso nel cestino posate o posti
in posizione orizzontale sulle ribaltine o
nel vassoio/terzo cesto nei modelli in cui è
presente.
L’apparecchio deve essere connesso alla
rete idrica collegando il nuovo tubo di carico
e il vecchio tubo di carico non deve essere
riutilizzato
Se la lavastoviglie è a libera installazione, il
lato posteriore della stessa deve essere posto
contro un muro.
Smaltimento
Smaltimento del materiale di imballaggio:
attenersi alle norme locali, così gli imballaggi
potranno essere riutilizzati.
La direttiva Europea 2012/19/EU sui rifiuti di
apparecchiature elettriche ed elettroniche
(RAEE), prevede che gli elettrodomestici non
debbano essere smaltiti nel normale flusso
dei rifiuti solidi urbani. Gli apparecchi dismessi
devono essere raccolti separatamente per
ottimizzare il tasso di recupero e riciclaggio
dei materiali che li compongono ed impedire
potenziali danni per la salute e l’ambiente. Il
simbolo del cestino barrato è riportato su tutti
i prodotti per ricordare gli obblighi di raccolta
separata.
Quando si acquista una nuova apparecchiatura
equivalente si può consegnare il RAEE
al negoziante, che è tenuto a ritirarlo
gratuitamente; i RAEE di “piccolissime
dimensioni” (nessun lato sopra i 25 cm)
possono essere consegnati gratuitamente
ai negozianti anche se non si acquista nulla
(solo nei negozi con superficie di vendita
superiore a 400 mq).
Per ulteriori informazioni, sulla corretta
dismissione degli elettrodomestici, i detentori
potranno rivolgersi al servizio pubblico
preposto o ai rivenditori.
Risparmiare e rispettare l’ambiente
Risparmiare acqua ed energia
Avviare la lavastoviglie solo a pieno carico. In
attesa che la macchina sia piena, prevenire i
cattivi odori con il ciclo Ammollo
(dove disponibile
- vedi Programmi)
.
Selezionare un programma adatto al tipo di
stoviglie e al grado di sporco consultando la
Tabella dei programmi:
- per stoviglie normalmente sporche utilizzare
il programma Eco, che garantisce bassi
consumi energetici e di acqua.
- se il carico è ridotto attivare l’opzione Mezzo
carico
(dove disponibile vedi Programmi Speciali ed
Opzioni).
Se il proprio contratto di erogazione
dell’energia elettrica prevede fasce orarie
di risparmio energetico, effettuare i lavaggi
negli orari a tariffa ridotta. L’opzione Partenza
Ritardata può aiutare a organizzare i lavaggi
in tal senso
(
dove disponibile vedi Programmi Speciali
ed Opzioni).
7
Ficha producto
Marca
ARISTON
Modelo
LFF 8M019
Capacidad nominal en número de cubiertos estándar (1)
14
Clase de eciencia energética sobre una escala de A+++ (bajo consumo) a D (alto consumo)
A+
Consumo energético anual en kWh (2)
295
Consumo energético del ciclo de lavado estándar en kWh
1.04
Consumo de potencia en el modo apagado en W
0.5
Consumo de potencia en el modo espera en W
5.0
Consumo de agua anual en litros (3)
3080
Clase de ecacia de secado sobre una escala de G (ecacia mínima) a A (ecacia máxima)
A
Duración del programa por ciclo de lavado estándar en minutos
190
Duración del modo espera en minutos
12
Nivel de ruido en dB(A) re 1 pW
49
Modelo de encastre
No
NOTAS
1) La información contenida en la etiqueta y la cha se reere al ciclo estándar de lavado, este programa está diseñado para lavar
normalmente vajillas manchadas y es el programa más eciente en términos de consumo combinado de agua y energía. El ciclo
estándar de lavado se corresponde con el ciclo Eco.
2) Basado en 280 ciclos de lavado estándar con agua fría y consumo de modos de bajo consumo energético. El consumo actual
dependerá de cómo se utilice el aparato.
3) Basado en 280 ciclos de lavado estándar. El consumo actual de agua depende de cómo se utilice el aparato.
ES
Ficha producto
Product Fiche
Brand
ARISTON
Model
LFF 8M019
Rated capacity in standard place settings (1)
14
Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)
A+
Energy consumption per year in kWh (2)
295
Energy consumption of the standard cleaning cycle in kWh
1.04
Power consumption of the off-mode in W
0.5
Power consumption of the left-on mode in W
5.0
Water consumption per year in litres (3)
3080
Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)
A
Programme time for standard cleaning cycle in minutes
190
The duration of the left-on mode in minutes
12
Noise in dB(A) Re 1pW
49
Built-in model
No
NOTES
1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled
tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle
corresponds to the Eco cycle.
2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy
consumption depends on how the appliance is used.
3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.
EN
Product Data (product fiche)
8
PT
Ficha de produto
Ficha de produto
Marca
ARISTON
Modelo
LFF 8M019
Capacidade nominal, em serviços de louça-padrão (1)
14
Classe de eciência energética numa escala de A+++ (baixos consumos) a D (altos consumos)
A+
Consumo de energia anual em kWh (2)
295
Consumo de energia do ciclo de lavagem normal em kWh
1.04
Consumo, em termos de potência, em estado de desactivação em (W)
0.5
Consumo, em termos de potência, em estado inactivo em (W)
5.0
Consumo de água anual em litros (3)
3080
Classe de ecácia de secagem numa escala da G (ecácia miníma) a A (ecácia máxima)
A
Duração do programa para o ciclo de lavagem normal, em minutos 5)
190
Duração do estado inactivo expressa em minutos 6)
12
Emissão de ruído aéreo expressa em dB(A) re 1 pW7)
49
Produto de encastre
Não
1) A informação constante na etiqueta e na tabela de características fazem referência ao programa normal de lavagem, este
programa é adequado a lavar louça com um grau de sugidade normal e é o programa mais efeciente em termos de consumo
combianado de energia e água.
2) Baseado em 280 ciclos de lavagem normal com enchimento a água fria e no consumo dos modos de baixo consumo de
energia. O consumo real de energia dependerá das condições de utilização do aparelho.
3) Baseado em 280 ciclos de lavagem normal. O valor real do consumo de água dependerá do modo de utilização do aparelho.
Scheda prodotto
Marchio
ARISTON
Modello
LFF 8M019
Capacità nominale in numero di coperti standard (1)
14
Classe di efcienza energetica su una scala da A+++ (bassi consumi) a D (alti consumi)
A+
Consumo energetico annuo in kWh (2)
295
Consumo energetico del ciclo di lavaggio standard in kWh
1.04
Consumo di potenza nel modo spento in W
0.5
Consumo di potenza nel modo lasciato acceso in W
5.0
Consumo di acqua annuo in litri (3)
3080
Classe di efcacia di asciugatura su una scala da G (efcacia minima) ad A (efcacia massima)
A
Durata del programma per il ciclo di lavaggio standard in minuti
190
Durata del modo lasciato acceso in minuti
12
Rumore in dB(A) re 1 pW
49
Prodotto da incasso
No
NOTE
1) L’informazione sull’etichetta e sulla scheda fanno riferimento al programma standard di lavaggio, questo programma è adatto per
lavare stoviglie che presentano un grado di sporco normale ed è il programma più efciente in termini di consumo combinato di energia
ed acqua. Il ciclo standard corrisponde al ciclo ECO.
2) Consumo di energia basato su 280 cicli annui standard con acqua caricata fredda e sui consumi in modo di spento o di lasciato
acceso dopo la ne ciclo. Il consumo effettivo dipende da come viene usato l’elettrodomestico.
3) Basato su 280 cicli di lavaggio standard. Il consumo effettivo dipende dalle modalità di utilizzo dell’apparecchio.
IT
Scheda prodotto
9
EN
Assistance
Before contacting Assistance:
Check whether the problem can be resolved using the
Troubleshooting guide
(see Troubleshooting).
Restart the programme to check whether the problem has
ceased to exist.
If the problem persists, contact the Authorised Technical
Assistance Service.
Never use the services of unauthorised technicians.
Please have the following information to hand:
The type of malfunction.
The appliance model (Mod.).
The serial number (S/N).
This information can be found on the appliance data plate
(see
Description of the appliance)
.
PT
Assistência
Antes de contactar a Assistência:
Verifique se pode resolver sozinho a anomalia
(veja Anomalias
e Soluções).
Reinicie o programa para controlar se o inconveniente foi
resolvido.
Em caso negativo, contacte o Serviço de Assistência Técnica
Autorizado.
Nunca recorra a técnicos não autorizados.
Comunique:
o tipo de defeito;
o modelo da máquina (Mod.);
o número de série (S/N).
Estas informações encontram-se na placa de identificação
situada no aparelho
(veja Descrição do Aparelho)
.
ES
Asistencia Técnica
Antes de llamar al Servicio de Asistencia Técnica:
Verifique si la anomalía puede ser resuelta por Ud. mismo
(ver Anomalías y Soluciones).
Vuelva a poner en funcionamiento el programa para controlar
si el inconveniente ha sido resuelto.
Si no es así, llame al Servicio de Asistencia Técnica
Autorizado.
No llame nunca a técnicos no autorizados.
Comunique:
el tipo de anomalía;
el modelo de la máquina (Mod.);
y el número de serie (S/N).
Esta información se encuentra en la placa de características
ubicada en el aparato
(ver Descripción del aparato).
IT
Assistenza
Prima di contattare l’Assistenza:
Verificare se l’anomalia può essere risolta da soli
(vedi Anomalie
e Rimedi)
.
Riavviare il programma per controllare se l’inconveniente è stato
ovviato.
In caso negativo, contattare il Servizio Assistenza Tecnica
Autorizzato.
Non ricorrere mai a tecnici non autorizzati.
Comunicare:
il tipo di anomalia;
il modello della macchina (Mod.);
il numero di serie (S/N).
Queste informazioni si trovano sulla targhetta caratteristiche posta
sull’apparecchio
(vedi Descrizione dell’apparecchio).
10
EN
Installation
* Only available in selected models.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto
its back.
Connecting the water supply
Adaptation of the water supply for installation should only
be performed by a qualified technician.
The water inlet and outlet hoses may be positioned towards
the right or the left in order to achieve the best possible
installation.
Make sure the dishwasher does not bend or squash the hoses.
Connecting the water inlet hose
To a 3/4” gas cold or hot water connection point (max.
60°C).
Run the water until it is perfectly clear.
Screw the inlet hose tightly into position and turn off the
tap.
If the inlet hose is not long enough, contact a specialist
store or an authorised technician
(see Assistance)
.
The water pressure must be within the values indicated
in the Technical Data table - otherwise the dishwasher may
be function properly.
Make sure the hose is not bent or compressed.
Connecting the water outlet hose
Connect the outlet hose to a drain duct with a minimum
diameter of 2 cm. (A)
The outlet hose connection must be at a height ranging from
40 to 80 cm from the floor or surface where the dishwasher
rests.
Before connecting the water outlet hose to the sink drain,
remove the plastic plug (B).
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water
supply in the event of anomalies or leaks from inside the
appliance.
Some models are also equipped with the supplementary
safety device New Acqua Stop*, which guarantees anti-
flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstances should the water inlet hose be cut
as it contains live electrical parts.
Electrical connection
Before inserting the plug into the electrical socket, make
sure that:
The socket is earthed and complies with current
regulations;
the socket can withstand the maximum load of the
appliance as shown on the data plate located on the inside
of the door
(see chapter Description of the appliance);
The power supply voltage falls within the values indicated
on the data plate on the inside of the door.
The socket is compatible with the plug of the appliance. If
this is not the case, ask an authorised technician to replace
the plug (
see Assistance
). Do not use extension cables or
multiple sockets.
Once the appliance has been installed, the power supply
cable and the electrical socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced
by the manufacturer or its authorised Technical Assistance
Service in order to prevent all potential hazards.
(See
Assistance)
The Company shall not be held responsible for any
incidents, if these regulations are not observed.
Positioning and levelling
1. Position the dishwasher on a level sturdy floor. If the floor is
uneven, the front feet of the appliance may be adjusted until
it reaches a horizontal position. If the appliance is levelled
correctly, it will be more stable and much less likely to move
or cause vibrations and noise while it is operating.
2. Before recessing the dishwasher, stick the adhesive
transparent strip
* under the wooden shelf in order to protect
it from any condensation which may form.
3. Place the dishwasher so that its sides or back panel are in
contact with the adjacent cabinets or the wall. This appliance
can also be recessed under a single worktop
*
(see the
Assembly instruction sheet)
.
4
*. To adjust the height of the rear foot, turn the red hexagonal
bushing on the lower central part at the front of the dishwasher
using a hexagonal spanner with an opening of 8 mm. Turn the
spanner in a clockwise direction to increase the height and
in an anticlockwise direction to decrease it.
(see Building-in
instruction sheet attached to the documentation)
MIN 40 cm
MAX 80 cm
11
EN
Advice regarding the first wash cycle
After the installation, remove the stoppers from the racks and
the retaining elastic elements from the upper rack
(if any).
Water softener settings
Before starting the first wash cycle, set the hardness lev-
el of
the water from the mains supply.
(see chapter Rinse
aid and refined salt).
First load the softener tank with water, then introduce about
1 kg of salt. It is perfectly normal for water to flow out.
As soon as this procedure is complete, run a wash cycle.
Only use salt that has been specifically designed for dish-
washers.
After the salt has been poured into the machine, the LOW
SALT indicator light
* switches off.
If the salt container is not filled, the water softener and the
heating element may be damaged as a result.
Technical data
Dimensions
width 60 cm
height 85 cm
depth 60 cm
Capacity 14 standard place-settings
Water supply pressure
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 – 145 psi
Power supply voltage See appliance data plate
Total absorbed power See appliance data plate
Fuse See appliance data plate
This dishwasher conforms to the
following European Community
Directives:
-2006/95/EC (Low Voltage)
-2004/108/EC (Electromagnetic
Compatibility)
-2009/125/EC (Comm. Reg.
1016/2010) (Ecodesign)
-97/17/EC (Labelling)
-2012/19/EU Waste Electrical
and Electronic Equipment
(WEEE)
* Only available in selected models.
The machine has a buzzer/set of tones
(depending on the
dishwasher model
) to inform the user that a command has
been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed
light
(depending on the dishwasher model)
.
The display provides useful information concerning the type
of wash cycle, drying/wash-cycle phase, remaining time,
temperature etc etc.
12
EN
Overall view
Description of the
appliance
1. Upper rack
2. Upper spray arm
3. Tip-up compartments
4. Rack height adjuster
5. Lower rack
6. Lower spray arm
7. Washing filter
8. Salt dispenser
9. Detergent dispenser, rinse-aid dispenser and
Active Oxygen device*
10. Data plate
11. Control panel***
***
Only in completely built-in models.
* Only available in selected models.
Control panel
The number and type of wash cycles and options may vary depending on the dishwasher model.
Start/Pause
button and
indicator lights
Button and
indicator light
On-Off/Reset
Extra Drying Option button
Half Load Option button
Delayed Start
Option buttons
Multi-functional Tablets
option button (Tabs)
Wash-Cycle Selection buttons
Short Time Option button
Wash-cycle indicator lights
Wash-cycle indicator lights
Half Load Option indicator light
Low Rinse-Aid indicator light
Low Salt indicator light
Blocked Filter indicator light
Extra Drying Option indicator light
Multi-Functional Tablets Option indicator light (Tabs)
Washing and Drying indicator lights
Tap Shut-Off indicator light
Delayed Start Option indicator light
Short Time Option indicator light
Remaining Time indicator
Display
13
EN
Refined Salt and Rinse Aid
Only use products which have been specifically designed
for dishwashers. Do not use table salt or industrial salt.
Follow the instructions given on the packaging.
If you are using a multi-function product, we recommend
that you add salt in any case, especially if the water is hard or
very hard.
(Follow the instructions given on the packaging.)
If you do not add salt or rinse aid, the LOW SALT* and
LOW RINSE AID
* indicator lights will remain lit.
Measuring out the refined salt
The use of salt prevents the formation of LIMESCALE on the dishes
and on the machine’s functional components.
• It is important that the salt dispenser be never empty.
• It is important to set the water hardness.
The salt dispenser is located in the lower part of the dishwasher
(see Description)
and should be filled:
When the LOW RINSE AID indicator light in the control panel
is lit *;
When the green float* on the cap of the salt dispenser is no
longer visible.
See autonomy in the water hardness table.
1. Remove the lower rack and unscrew the
container cap (anticlockwise).
2. Only the first time you do this: fill the water
dispenser up to the edge.
3. Position the funnel
(see figure)
and
fill the salt container right up to its edge
(approximately 1 kg); it is not unusual for a
little water to leak out.
4. Remove the funnel and wipe any salt residue away from the
opening; rinse the cap under running water and then screw it on.
It is advisable to perform this procedure every time you add salt
to the container.
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash cycle (this could damage
the water softener beyond repair).
Whenever you need to add salt, we recommend carrying out
the procedure before the washing cycle is started.
Setting the water hardness
For perfect water softener operation, it is essential that the
adjustment be based on the water hardness in your house. Ask
your local water supplier for this information. The factory setting
is for medium water hardness.
• Switch the dishwasher on using the On/Off button.
• Switch it off using the On/Off button
Hold down the START/PAUSE button for 5 seconds until
you hear a beep.
• Switch it on using the On/Off button
The display shows the current selection level number and the
salt indicator light.
Press button ECO to select the desired hardness level
(see
Hardness Table).
• Switch it off using the On/Off button
• Setting is complete!
Even if using multi-functional tablets, the salt dispenser should
still be filled.
Measuring out the rinse aid
Rinse aid makes dish DRYING easier. The rinse aid dispenser
should be filled:
When the LOW RINSE AID indicator light on the panel/display
is lit *;
When the dark optical indicator* on the dispenser door “D”
becomes transparent.
1. Open the dispenser
“D” by pressing and pulling up the tab
on the lid;
2. Carefully introduce the rinse aid as far as the maximum reference
notch of the filling space - avoid spilling it. If this happens, clean
the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the appliance tub.
Rinse-aid dispenser setting
If you are not completely satisfied with the drying results, you can
adjust the quantity of rinse aid.
• Switch the dishwasher on using the On/Off button.
• Switch it off using the On/Off button
• Press the START/PAUSE button 3 times - a beep will be
heard.
• Switch it on using the On/Off button
• The display shows the current selection level and the rinse aid
indicator light.
• Press button ECO to select the level of rinse aid quantity to be
supplied.
• Switch it off using the On/Off button
• Setting is complete!
If the rinse aid level is set to ZERO, no rinse aid will be supplied.
The LOW RINSE AID indicator light will not illuminate if you run
out of rinse aid.
Up to maximum 4 levels can be set based on the dishwasher
model.
If there are streaks on the crockery, set the adjustment device
to a lower number (1-2.)
If there are drops of water or limescale marks, set the adjustment
device to a higher number (3-4.)
Water Hardness Table
Average salt dispenser
capacity duration**
level °dH °fH mmol/l months
1 0 - 6 0 - 10 0 - 1 7 months
2 6 - 11 11 - 20 1,1 - 2 5 months
3 12 - 17 21 - 30 2,1 - 3 3 months
4 17 - 34 31 - 60 3,1 - 6 2 months
5
*
34 - 50 61 - 90 6,1 - 9 2/3 weeks
For values between 0°f and 10°f, we do not recommend the use of salt.
* a setting of 5 may increase cycle duration.
** 1 wash cycle per day.
(°dH = hardness measured in German degrees - °f = hardness
measured in French degrees – mmol/l = millimoles per litre)
* Only available in selected models.
M
A
X
14
EN
Loading the racks
Tips
Before loading the racks, remove all food residues from the
crockery and empty liquids from glasses and containers. No
preventive rinsing is needed under running water.
Arrange the crockery so that it is held in place firmly and does
not tip over; and arrange the containers with the openings facing
downwards and the concave/convex parts placed obliquely,
thus allowing the water to reach every surface and flow freely.
Make sure that the lids, handles, trays and frying pans do not
prevent the spray arms from rotating. Place any small items in
the cutlery basket.
Since plastic dishes and non-stick frying pans usually retain more
water drops, their drying will be not so good as that of ceramic
or stainless-steel dishes.
Lightweight items such as plastic containers should be placed in
the upper rack and arranged so that they cannot move.
After loading the appliance, make sure that the spray arms can
rotate freely.
Lower rack
The lower rack can hold pans, lids, dishes, salad bowls, cutlery
etc. Large plates and lids should ideally be placed at the sides.
Very soiled dishes and pans should be placed in the lower rack
because in this sector the water sprays are stronger and allow
a higher washing performance.
Several dishwasher models are fitted with tip-up sectors
*.
They can be used in a vertical position when arranging dishes
or in a horizontal position (lower) to load pans and salad bowls
easily.
Cutlery basket
The basket is equipped with top grilles for improved cutlery ar-
rangement. The cutlery basket should be positioned only at the
front of the lower rack
Upper rack
Load this rack with delicate and lightweight crockery such as
glasses, cups, saucers and shallow salad bowls.
Several dishwasher models are fitted with tip-up sectors
*.
They can be used in a vertical position when arranging tea/
dessert saucers or in a lower position to load bowls and food
containers.
* Only available in selected models.
15
EN
The upper rack can be adjusted for height based on requirements:
high position to place bulky crockery in the lower rack and low
position to make the most of the tip-up compartments/sectors
by creating more space upwards.
Tip-up compartments with adjustable position*
The side tip-up compartments can be positioned at three different
heights to optimize the arrangement of crockery inside the rack.
Wine glasses can be placed safely
in the tip-up compartments by
inserting the stem of each glass
into the corresponding slots. For
optimum drying results incline the
tip-up compartments more. To
change the inclination, pull up the
tip-up compartment, slide it slightly
and position it as you wish.
Cutlery tray*
Some dishwasher models are fitted with a sliding tray which
can be used to hold serving utensils or small cups. For optimum
washing performance avoid positioning bulky crockery directly
below the tray. The cutlery tray can be removed
(see Figure).
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower position.
The height of the upper rack should be adjusted WHEN THE
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.
If the rack is equipped with a Lift-Up
device*
(see figure)
, lift
it up by holding its sides. To restore the lower position, press
the levers (A) at the sides of the rack and follow the rack down.
Unsuitable crockery
Wooden crockery and cutlery.
Delicate decorated glasses, artistic handicraft and antique
crockery. Their decorations are not resistant.
Parts in synthetic material which do not withstand high
temperatures.
Copper and tin crockery.
Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces
can change and fade during the washing process. Some types
of glass (e.g. crystal objects) can become opaque after a number
of wash cycles too.
Damage to glass and crockery
Caused by:
Type of glass and glass production process.
Chemical composition of detergent.
Water temperature of rinse cycle.
Tips:
Only use glasses and porcelain guaranteed by the
manufacturer as dishwasher safe.
Use a delicate detergent suitable for crockery.
Collect glasses and cutlery from the dishwasher as soon as
the wash cycle is over.
*Only available in selected models with different numbers and
positions.
16
EN
Measuring out the detergent
Good washing results also depend on the correct amount of
detergent being used. Exceeding the stated amount does not
result in a more effective wash and increases environmental
pollution.
The amount can be adjusted to the soil level.
In the case of normally soiled items, use approximately either
35g (powder detergent) or 35ml (liquid detergent). If tablets
are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has been rinsed
with water before being placed in the dishwasher, reduce the
amount of detergent used accordingly.
For good washing results also follow the instructions shown
on the detergent box.
For further questions please ask the detergent producers.
To open the detergent dispenser use the opening device “A”.
Introduce the detergent into the dry dispenser “B” only.
Place the amount of detergent for pre-washing directly inside
the tub.
1. When measuring out the detergent refer to the Table of wash
cycles to add the proper quantity. Compartment B comprises a
level showing the maximum quantity of liquid or powder detergent
that can be added to each cycle.
2. Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until
the closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the wash cycle.
If all-in-one detergents are used, we recommend using the TABS
option, because it adjusts the cycle so that the best washing and
drying results are always achieved.
Only use detergent which has been specifically designed
for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam residues
remaining in the machine after the cycle has ended.
To achieve the best washing and drying results, the combined
use of detergent, rinse aid liquid and refined salt is required.
We recommend using detergents that do not contain
phosphates or chlorine, as these products are harmful
to the environment.
Detergent and
dishwasher use
Starting the dishwasher
1. Press the ON/OFF button.
2. Open the door and pour in a suitable amount of detergent
(see detergent).
3. Load the racks
(see Loading the racks)
and shut the door.
4. Select the wash cycle in accordance with the type of crockery
and its soil level
(see Table of wash cycles)
by pressing the
wash-cycle selection buttons.
5. Select the wash options
*
(
see wash options)
.
6. Start the cycle by pressing the Start/Pause button: The wash
indicator light comes on and the time left to the end of the cycle
appears on the display.
7. At the end of the cycle, the display shows END. Switch off the
appliance by pressing the ON/OFF button.
8. Wait for a few minutes before removing the crockery in order
to avoid burns. Unload the racks, beginning with the lower level.
The machine will switch off automatically during long
periods of inactivity in order to minimise electricity
consumption.
Changing a wash cycle in progress
If a mistake was made in the wash cycle selection process, it is
possible to change the cycle provided that it has only just begun:
once the wash cycle has started, in order to change the wash
cycle switch off the machine by pressing and holding the ON/
OFF/Reset button. Switch it back on using the same button and
select the desired wash cycle and options.
Adding extra crockery
Press the Start/Pause button and open the door, taking care to
avoid the escaping steam, and place the crockery inside the
dishwasher. Press the Start/Pause button: The cycle will start
again after a long beep has been emitted.
If the delayed start has been set, at the end of the countdown
the wash cycle will not start. It will stay in Pause mode.
Press the Start/Pause button to pause the machine; the wash
cycle is stopped.
At this stage it is not possible to change the wash cycle.
Accidental interruptions
If the door is opened during the wash cycle or there is a power
cut, the cycle stops. It starts again from the point at which it was
interrupted once the door has been shut or the electricity supply
is restored.
17
EN
Wash cycles
Wash cycle
Wash cycle
which include
drying
Options
Approximate
duration of
wash cycles
H:min.
Water
consumption
(l/cycle)
Energy
consumption
(KWh/cycle)
1. Eco Yes
Delayed start – Tabs –
Extra Dry - Half Load
03:10 11 1,04
2. Intensive Yes
Delayed start – Tabs –
Extra Dry – Short Time -
Half Load
02:30 16,5 1,70
3. Normal Yes
Delayed start – Tabs –
Extra Dry – Short Time -
Half Load
02:00 16,0 1,35
4. Fast No
Delayed start – Tabs -
Half Load
01:00 11,5 1,10
5. Delicate Yes
Delayed start – Tabs –
Extra Dry - Half Load
01:30 12,0 1,10
6. Express 30’ No Delayed start – Tabs 00:30 8,5 0,45
7. Soak No Delayed start - Half Load 00:10 4,0 0,01
8. Sanitazing Yes Delayed start 01:20 11,5 1,35
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Instructions on wash-cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.
29 gr/ml + 6 gr/ml** – 1 Tab
(**Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 35 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 29 gr/ml + 6 gr/ml** – 1 Tab
4. Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab
5. Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab
6. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab
7. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.
8. High-temperature disinfecting cycle. Ideal to clean crockery and feeding bottles. 30 gr/ml – 1 Tab
Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W.
18
EN
Extra drying option
To improve the dryness level of the crockery, press
the EXTRA DRYING button and the symbol will light up. If it
is pressed again, the option will be deselected.
A higher temperature during the final rinsing and a longer
drying phase improve the dryness level.
The EXTRA DRYING option increases the duration of
the wash cycle.
Delayed start option
It is possible to delay the start time of the cycle for
a period of time between 1 and 24 hours:
1. Select the desired wash cycle and any other options
required, press the DELAYED START button. The relevant
symbol starts flashing. Use the buttons + and - to select when
the wash cycle will start (h01, h02 etc.)
2. Confirm with the START/PAUSE button. The symbol stops
flashing and the countdown begins.
3. Once this time has elapsed, the DELAYED START symbol
switches off and the wash cycle begins.
To deselect the DELAYED START option, press the DELAYED
START button until the text OFF
appears.
The Delayed Start function cannot be set once a wash
cycle has been started.
Wash options
The OPTIONS may only be set, changed or reset after the
wash cycle has been selected and before the Start/Pause
button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
corresponding symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another
(previously selected) option, it will flash 3 times and switch
off, while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Multi-functional tablets option (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button; the corresponding symbol
will light up. If the button is pressed again, the option will be
deselected.
The “Multi-functional tablets” option results in a longer
wash cycle.
Special wash cycles
and Options
Short Time option
This option can be used to reduce the duration of the
main wash cycles while maintaining the same washing and drying
performance levels.
Having selected the option, press the Short Time button. To
deselect the option, press the same button again.
Notes:
Optimum performance levels when using the “Fast wash”
and “Express 30’” cycles can be achieved by respecting
the specified number of place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: for information on comparative
EN testing conditions, please send an email to the following
address:
* Only available in selected models.
Half load option
If there are not many dishes to be washed, a half load
cycle may be used in order to save water, electricity
and detergent. Select the wash cycle and press the HALF
LOAD button: the indicator light will illuminate.
Press the HALF LOAD button to deselect this option.
Remember to halve the amount of detergent.
19
EN
Care and maintenance
Shutting off the water and electricity
supplies
Turn off the water tap after every wash cycle to avoid leaks.
Always unplug the appliance when cleaning it and when
performing maintenance work.
Cleaning the dishwasher
The external surfaces of the machine and the control panel
can be cleaned using a non-abrasive cloth which has been
dampened with water. Do not use solvents or abrasive
products.
Any marks on the inside of the appliance may be removed
using a cloth dampened with water and a little vinegar.
Preventing unpleasant odours
Always keep the door of the appliance ajar in order to avoid
moisture from forming and being trapped inside the machine.
Clean the seals around the door and detergent dispensers
regularly using a damp sponge. This will avoid food becoming
trapped in the seals, which is the main cause behind the
formation of unpleasant odours.
Cleaning the spray arms
Food residue may become encrusted onto the sprayer arms
and block the holes used to spray the water. It is therefore
recommended that you check the arms from time to time and
clean them with a small non-metallic brush.
The two spray arms may both be removed.
To remove the upper spray arm,
turn the plastic locking ring in an
anti-clockwise direction. The upper
sprayer arm should be replaced
so that the side with the greater
number of holes is facing upwards.
The lower spray arm can be removed
by pressing on the side tabs and
pulling it upwards.
Cleaning the water inlet hose*
If the water hoses are new or have not been used for an extended
period of time, let the water run to make sure it is clear and free
of impurities before performing the necessary connections. If this
precaution is not taken, the water inlet could become blocked
and damage the dishwasher.
Clean the water inlet filter at the tap outlet regularly.
- Turn off the water tap.
- Unscrew the end of the water inlet hose, remove the filter and
clean it carefully under running water.
- Re-place the filter and screw the water hose back into position.
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the water.
They must be cleaned if you wish to achieve the best results in
every wash.
Clean the filters regularly.
The dishwasher must not be used without filters or if the filter
is loose.
After several washes, check the filter assembly and if necessary
clean it thoroughly under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction and
pull it out
(fig. 1).
2. Remove the cup filter B by exerting a slight pressure on the
side flaps
(fig. 2);
3. Slide out the stainless-steel plate filter A.
(fig. 3).
4. Inspect the trap and remove any food residues. NEVER
REMOVE the wash-cycle pump protection
(black detail) (fig.4).
After cleaning the filters, re-place the filter assembly and fix it
in position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
Disconnect the appliance from the electricity supply and shut
off the water tap.
Leave the door of the appliance ajar.
When you return, run a wash cycle when the dishwasher is
empty.
* Only available in selected models.
20
EN
Troubleshooting
Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance.
* Only available in selected models.
Problem: Possible causes / Solutions:
The dishwasher does not start
or cannot be controlled.
• The water supply tap is not turned on.
• Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately
one minute and reset the wash cycle.
• The appliance has not been plugged in properly or another electricity socket should be used.
• The dishwasher door has not been closed properly.
The door won’t close.
• Make sure that the racks were inserted all the way.
• The lock was released. Strongly push the door until a “clacking” noise is heard.
No water drain out of the
dishwasher.
• The wash cycle has not nished yet.
• The water drain hose is bent
(see Installation).
• The drain duct is clogged up.
• The lter is clogged up with food residues.
• Check the height of the drain hose.
The dishwasher makes
excessive noise.
• The dishes are rattling against each other or against the spray arms. Place the dishes
properly and make sure the spray arms can rotate freely.
• Too much foam: the detergent has not been measured out correctly or it is not suitable for use
in dishwashers.
(See Detergent and dishwasher use.)
Do not prewash the dishes by hand.
The dishes and glasses are
covered in a white lm or
limescale deposits.
• No rened salt.
• Water hardness adjustment is not suitable: increase the relevant values.
(See Rened Salt
and Rinse Aid.)
• The salt and rinse-aid dispenser cap has not been closed properly.
• The rinse aid has been used up or the dosage is too low.
The dishes and glasses are
streaked or have a bluish
tinge.
• The rinse aid dosage is too high.
The crockery has not been
dried properly.
A wash cycle without a drying programme has been selected.
• The rinse aid has been used up.
(See Rened Salt and Rinse Aid.)
• The rinse aid dispenser setting is not suitable.
• The crockery is made from non-stick material or plastic; the presence of water drops is
normal.
The dishes are not clean. • The crockery has not been arranged properly.
• The spray arms cannot rotate freely, being hindered by the dishes.
• The wash cycle is too gentle
(see Wash Cycles).
• Too much foam: the detergent has not been measured out correctly or it is not suitable for use
in dishwashers.
(See Detergent and dishwasher use.)
• The lid on the rinse aid compartment has not been closed correctly.
• The lter is dirty or clogged up
(see Care and maintenance.)
• The rened salt level is low
(See Rened Salt and Rinse Aid.)
• Make sure that the height of the dishes is compatible with the rack adjustment.
• The holes in the sprayer arms are clogged up.
(See Care and maintenance.)
The dishwasher won’t load
any water.
It is blocked with ashing lights.
• There is no water in the mains supply or the tap is shut off.
• The water inlet hose is bent
(see Installation).
• The lters are clogged up: they need cleaning.
(See Care and maintenance.)
• The drain duct is clogged up: it needs cleaning.
After checking and cleaning, switch the dishwasher on and off and start a new wash cycle.
• If the problem persists, turn off the water tap, remove the plug and call the Service Centre.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Ariston LFF 8M019 X AG Guida utente

Categoria
Lavastoviglie
Tipo
Guida utente