Samsung SWA-W700 Manuale utente

Categoria
Apparecchiature musicali supplementari
Tipo
Manuale utente
SWA-W700
USER MANUAL
ENG - 2 ENG - 3
Safety Information
Thank you for purchasing this product (SWA-W700).
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol indicates that
high voltage is present inside.
It is dangerous to make any
kind of contact with any
internal part of this product.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates
that important literature
concerning operation and
maintenance has been
included with this product.
Class II product : This symbol indicates that it does not require a safety connection to
electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
The slots and openings in the cabinet and
in the back or bottom are provided for
necessary ventilation. To ensure reliable
operation of this apparatus, and to protect it
from overheating, these slots and openings
must never be blocked or covered.
Do not place this apparatus in a conned
space, such as a bookcase, or built-in
cabinet, unless proper ventilation is
provided.
Do not place this apparatus near or over
a radiator or heat register, or where it is
exposed to direct sunlight.
Do not place vessels (vases etc.)
containing water on this apparatus.
A water spill can cause a re or electric
shock.
Do not expose this apparatus to rain
or place it near water (near a bathtub,
washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool,
etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer
immediately.
Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in re or electric shock.
ENG - 2 ENG - 3
Safety Information
Thank you for purchasing this product (SWA-W700).
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN
This symbol indicates that
high voltage is present inside.
It is dangerous to make any
kind of contact with any
internal part of this product.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE THE
COVER (OR BACK). THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER ALL
SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates
that important literature
concerning operation and
maintenance has been
included with this product.
Class II product : This symbol indicates that it does not require a safety connection to
electrical earth (ground).
AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC
voltage.
DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC
voltage.
Caution, Consult instructions for use : This symbol instructs the user to consult the user
manual for further safety related information.
Route power-supply cords so that they are
not likely to be walked on or pinched by items
placed on or against them. Pay particular
attention to cords at the plug end, at wall
outlets, and the point where they exit from
the apparatus.
To protect this apparatus from a lightning
storm, or when it is left unattended and
unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the
set due to lightning and power line surges.
Before connecting the AC power cord to the
DC adaptor outlet, make sure the voltage
designation of the DC adaptor corresponds to
the local electrical supply.
Never insert anything metallic into the open
parts of this apparatus. Doing so may create a
danger of electric shock.
To avoid electric shock, never touch the inside
of this apparatus. Only a qualied technician
should open this apparatus.
Make sure to plug the power cord in until it is
rmly seated. When unplugging the power
cord from a wall outlet, always pull on the
power cord’s plug. Never unplug by pulling on
the power cord. Do not touch the power cord
with wet hands.
If this apparatus does not operate normally
- in particular, if there are any unusual
sounds or smells coming from it - unplug it
immediately and contact an authorized dealer
or service centre.
Maintenance of Cabinet.
Before connecting other components to
this product, be sure to turn them off.
Be sure to pull the power plug out of the
outlet if the product is to remain unused or
if you are leaving the house for an extended
period of time (especially when children,
elderly, or disabled people will be left alone in
the house).
Accumulated dust can cause an electric
shock, an electric leakage, or a re by
causing the power cord to generate sparks
and heat or the insulation to deteriorate.
Contact an authorized service centre for
information if you intend to install your
product in a location with heavy dust, high or
low temperatures, high humidity, chemical
substances, or where it will operate 24 hours
a day such as in an airport, a train station, etc.
Failing to do so may cause serious damage to
your product.
Use only a properly grounded plug and wall
outlet.
An improper ground may cause electric
shock or equipment damage. (Class l
Equipment only.)
To turn this apparatus off completely, you
must disconnect it from the wall outlet.
Consequently, the wall outlet and power plug
must be readily accessible at all times.
Do not allow children to hang on the product.
Store the accessories (battery, etc.) in a
location safely out of the reach of children.
Do not place vessels (vases etc.)
containing water on this apparatus.
A water spill can cause a re or electric
shock.
Do not expose this apparatus to rain
or place it near water (near a bathtub,
washbowl, kitchen sink, or laundry tub, in
a wet basement, or near a swimming pool,
etc.). If this apparatus accidentally gets wet,
unplug it and contact an authorized dealer
immediately.
Do not overload wall outlets, extension cords
or adaptors beyond their capacity, since this
can result in re or electric shock.
ENG - 4 ENG - 5
Do not install the product in an unstable
location such as a shaky self, a slanted oor,
or a location exposed to vibration.
Do not drop or strike the product. If the
product is damaged, disconnect the power
cord and contact a service centre.
To clean this apparatus, unplug the power
cord from the wall outlet, and then wipe
the product using a soft, dry cloth. Do not
use any chemicals such as wax, benzene,
alcohol, thinners, insecticide, air fresheners,
lubricants, or detergent. These chemicals can
damage the appearance of the product or
erase the printing on the product.
Do not expose this apparatus to dripping
or splashing. Do not put objects lled with
liquids, such as vases, on the apparatus.
Do not plug multiple electric devices into the
same wall socket. Overloading a socket can
cause it to overheat, resulting in a re.
WARNING :
TO PREVENT THE SPREAD OF
FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
To reduce the risk of re or electric shock, do
not expose this appliance to rain or moisture.
Precautions
1. Ensure that the AC or DC power supply
in your house complies with the power
requirements listed on the identication
sticker located on the back of your product.
Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on ampliers
or other equipment which may become hot.
This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC
plug from the wall outlet.
2. Do not expose the unit to direct sunlight
or other heat sources. This could lead
to overheating and cause the unit to
malfunction.
3. Unplug the Power cord from the AC wall
socket if the unit malfunctions. Your product
is not intended for industrial use. It is for
personal use only. Condensation may occur
if your product has been stored in cold
temperatures. If transporting the unit during
the winter, wait approximately 2 hours until
the unit has reached room temperature
before using it.
4. If the electricity supplied to your home is
rated at 240V AC, use a suitable plug adapter
to connect this unit to your electrical outlets.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not t into your outlet, consult an
electrician for replacement of the obsolete
outlet.
ENG - 4 ENG - 5
Precautions
1. Ensure that the AC or DC power supply
in your house complies with the power
requirements listed on the identication
sticker located on the back of your product.
Install your product horizontally, on a
suitable base (furniture), with enough space
around it for ventilation (7~10 cm).
Make sure the ventilation slots are not
covered. Do not place the unit on ampliers
or other equipment which may become hot.
This unit is designed for continuous use.
To fully turn off the unit, disconnect the AC
plug from the wall outlet.
2. Do not expose the unit to direct sunlight
or other heat sources. This could lead
to overheating and cause the unit to
malfunction.
3. Unplug the Power cord from the AC wall
socket if the unit malfunctions. Your product
is not intended for industrial use. It is for
personal use only. Condensation may occur
if your product has been stored in cold
temperatures. If transporting the unit during
the winter, wait approximately 2 hours until
the unit has reached room temperature
before using it.
4. If the electricity supplied to your home is
rated at 240V AC, use a suitable plug adapter
to connect this unit to your electrical outlets.
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below. Keep these operating
instructions handy for future reference.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install
in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or other
apparatus (including AV receivers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug.
A polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety. If the provided
plug does not t into your outlet, consult an
electrician for replacement of the obsolete
outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where it exits the apparatus.
11. Only use attachments/accessories specied
by the manufacturer.
12. Use only with the cart,
stand, tripod, bracket,
or table specied by the
manufacturer, or sold with
the apparatus. When a cart
is used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning
storms or when you intend to leave it unused
for long periods of time.
14. Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or plug
is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does
not operate normally, or has been dropped.
ENG - 6 ENG - 7
Checking the Components
WIRELESS
Soundbar Sound
+
Subwoofer
Power Cord Wireless Dongle (WHM520V)
Screw (2 EA) Holder-Dongle
(Stand Type)
Holder-Dongle
(Wall mount Type / One Mount Type)
The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 11. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specications
Weight 14.6 kg
Dimensions (W x H x D) 320.0 X 338.3 X 320.0 mm
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10% ~ 75%
Speaker Subwoofer x 1, 254.0 mm, 4ohm
Wireless device output power SRD max transmitter power 25mW at 5.725GHz – 5.825GHz
NOTES
Samsung Electronics Co., Ltd reserves the right to change the specications without notice.
Weight and dimensions are approximate.
For more information about the power supply and power consumption, refer to the label attached
to the product.
Design and specications are subject to change without prior notice.
Open Source Licence Notice
To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
This product uses some software programs which are distributed under the FreeRTOS Modied GPL.
GPL Software : FreeRTOS
FreeRTOS Modied GPL License
http://www.freertos.org/license.txt
Important Note About Service
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the
user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user
manual has not been read).
You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-W700 to a Soundbar
1. Check the standby status after plugging into an electrical outlet
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer
to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer
blinks. If the LED does not blink, refer to step 7 on page 10.
Bottom of the Wireless Subwoofer
Front of the Wireless Subwoofer
ID SET
POWER
LINK
SERVICE
POWER
ID SET
POWER
LINK
SERVICE
POWER
Blue blinking
The main unit is heavy. Be careful not to pinch your ngers when pressing the ID SET button or
connecting the power cord on the bottom.
The upper part of the subwoofer is prone to scratches. Handle it carefully.
Speaker Unit
Rear of the Wireless Subwoofer
Do not press on or strike the Speaker Unit on the
rear of the body. You can deform or damage the
speaker.
ENG - 6 ENG - 7
Checking the Components
WIRELESS
Soundbar Sound
+
Subwoofer
Power Cord Wireless Dongle (WHM520V)
Screw (2 EA) Holder-Dongle
(Stand Type)
Holder-Dongle
(Wall mount Type / One Mount Type)
The Wireless Dongle is only compatible with Samsung Soundbars. For a list of compatible Samsung
Soundbars, see page 11. Do not connect the dongle to any other devices, such as smartphones,
desk-top PCs, or notebook PCs.
Specications
Weight 14.6 kg
Dimensions (W x H x D) 320.0 X 338.3 X 320.0 mm
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10% ~ 75%
Speaker Subwoofer x 1, 254.0 mm, 4ohm
Wireless device output power SRD max transmitter power 25mW at 5.725GHz – 5.825GHz
NOTES
Samsung Electronics Co., Ltd reserves the right to change the specications without notice.
Weight and dimensions are approximate.
For more information about the power supply and power consumption, refer to the label attached
to the product.
Design and specications are subject to change without prior notice.
Open Source Licence Notice
To send inquiries and requests regarding open sources, contact Samsung via Email
(oss.request@samsung.com).
This product uses some software programs which are distributed under the FreeRTOS Modied GPL.
GPL Software : FreeRTOS
FreeRTOS Modied GPL License
http://www.freertos.org/license.txt
Important Note About Service
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect with the product (i.e. where the
user manual has not been read).
(b) you bring the unit to a repair centre and there is no defect with the product (i.e. where the user
manual has not been read).
You will be informed of the administration fee amount before a technician visits.
Connecting the SWA-W700 to a Soundbar
1. Check the standby status after plugging into an electrical outlet
Plug the Wireless Subwoofer power cord into an electrical outlet and into the Wireless Subwoofer
to turn on the Wireless Subwoofer. The LINK LED indicator (blue LED) on the Wireless Subwoofer
blinks. If the LED does not blink, refer to step 7 on page 10.
Bottom of the Wireless Subwoofer
Front of the Wireless Subwoofer
ID SET
POWER
LINK
SERVICE
POWER
ID SET
POWER
LINK
SERVICE
POWER
Blue blinking
The main unit is heavy. Be careful not to pinch your ngers when pressing the ID SET button or
connecting the power cord on the bottom.
The upper part of the subwoofer is prone to scratches. Handle it carefully.
Speaker Unit
Rear of the Wireless Subwoofer
Do not press on or strike the Speaker Unit on the
rear of the body. You can deform or damage the
speaker.
ENG - 8 ENG - 9
2. Connect the main unit of the Soundbar to the Wireless Dongle
Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit.
When inserting the Wireless Dongle into the holder, make sure that the WIRELESS” logo is
facing up, as shown in the pictures below.
WIRELESS
WIRELESS
WIRELESS
1
2
Stand Type
WIRELESS
WIRELESS
WIRELESS
1
2
Wall Mount Type
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
One Mount Type (WMN300SB, not supplied)
Do not remove the wireless dongle from the main Soundbar.
The wireless dongle that comes with the product can be used with the optional Wireless Rear
Speaker Kit.
3. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button
on the main Soundbar.
BYE
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
The images of the Soundbar shown on this page may differ from your Soundbar, depending on
the model.
4. Congure “ID SET” using the Soundbars remote control
Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears
on your Soundbar’s display.
VOL
SOUNDBAR
ID
SET
5 Sec
5. Turn on the Soundbar
Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on
the main Soundbar.
ON
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
ENG - 8 ENG - 9
2. Connect the main unit of the Soundbar to the Wireless Dongle
Connect the wireless dongle to the “WIRELESS” port on the Soundbar main unit.
When inserting the Wireless Dongle into the holder, make sure that the WIRELESS” logo is
facing up, as shown in the pictures below.
WIRELESS
WIRELESS
WIRELESS
1
2
Stand Type
WIRELESS
WIRELESS
WIRELESS
1
2
Wall Mount Type
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
One Mount Type (WMN300SB, not supplied)
Do not remove the wireless dongle from the main Soundbar.
The wireless dongle that comes with the product can be used with the optional Wireless Rear
Speaker Kit.
3. Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button
on the main Soundbar.
BYE
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
The images of the Soundbar shown on this page may differ from your Soundbar, depending on
the model.
4. Congure “ID SET” using the Soundbars remote control
Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears
on your Soundbar’s display.
VOL
SOUNDBAR
ID
SET
5 Sec
5. Turn on the Soundbar
Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on
the main Soundbar.
ON
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
ENG - 10 ENG - 11
6. Check if the LINK LED is solid blue (connection complete)
Front of the Wireless Subwoofer
Stops blinking.
Glows blue.
The LINK LED indicator stops blinking
and glows a solid blue when a
connection is established between the
Soundbar and the Wireless Subwoofer.
7. If the SWA-W700 does not connect, take the necessary steps
according to the LED Indicators status
LED status Action
Blue
On
Connected with
the Soundbar
-
Blinking
Connection
standby status
Check if the Soundbar is turned on
Repeat steps 3 through 6.
Red On Connection failure
Check if the Soundbar is turned on
1. Press the ID SET button on the
bottom of the Wireless Subwoofer
with a pen tip for 5~6 seconds until
the LINK LED indicator blinks (in
Blue).
ID SET
POWER
LINK
SERVICE
ID SET LINK
5 Sec
2. Repeat steps 3 through 6.
Others - Errors Contact a Samsung Service Centre.
Compatible Models
HW-MS550 HW-MS55C HW-MS570 HW-MS57C HW-MS560
HW-MS650 HW-MS651 HW-MS6500 HW-MS6501 HW-MS660
HW-MS661 HW-MS6510 HW-MS6511 HW-MS750 HW-MS751
HW-MS760 HW-MS761
The model list is subject to change without further notice.
Hereby, Samsung Electronics, declares that this equipment is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.samsung.com go to Support > Search Product Support and enter
the model name. This equipment may be operated in all EU countries.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government ofce, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
For information on Samsung’s environmental commitments and product specic regulatory
obligations e.g. REACH visit:
samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
ENG - 10 ENG - 11
6. Check if the LINK LED is solid blue (connection complete)
Front of the Wireless Subwoofer
Stops blinking.
Glows blue.
The LINK LED indicator stops blinking
and glows a solid blue when a
connection is established between the
Soundbar and the Wireless Subwoofer.
7. If the SWA-W700 does not connect, take the necessary steps
according to the LED Indicators status
LED status Action
Blue
On
Connected with
the Soundbar
-
Blinking
Connection
standby status
Check if the Soundbar is turned on
Repeat steps 3 through 6.
Red On Connection failure
Check if the Soundbar is turned on
1. Press the ID SET button on the
bottom of the Wireless Subwoofer
with a pen tip for 5~6 seconds until
the LINK LED indicator blinks (in
Blue).
ID SET
POWER
LINK
SERVICE
ID SET LINK
5 Sec
2. Repeat steps 3 through 6.
Others - Errors Contact a Samsung Service Centre.
Compatible Models
HW-MS550 HW-MS55C HW-MS570 HW-MS57C HW-MS560
HW-MS650 HW-MS651 HW-MS6500 HW-MS6501 HW-MS660
HW-MS661 HW-MS6510 HW-MS6511 HW-MS750 HW-MS751
HW-MS760 HW-MS761
The model list is subject to change without further notice.
Hereby, Samsung Electronics, declares that this equipment is in compliance with
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
address: http://www.samsung.com go to Support > Search Product Support and enter
the model name. This equipment may be operated in all EU countries.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste
at the end of their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and recycle
them responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local
government ofce, for details of where and how they can take these items for environmentally safe
recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product and its electronic accessories should not be mixed with other commercial
wastes for disposal.
For information on Samsung’s environmental commitments and product specic regulatory
obligations e.g. REACH visit:
samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
FRA - 2 FRA - 3
Consignes de Sécuri
Merci d’avoir acheté ce produit (SWA-W700).
ATTENTION
RISQUE DE CHOC ÉLECTRIQUE.
NE PAS OUVRIR
Ce symbole indique la
présence d’une tension
dangereuse dans
l’appareil. Ne touchez
jamais les composants
internes du produit.
ATTENTION: POUR LIMITER LES RISQUES DE
DÉCHARGE ÉLECTRIQUE, NE RETIREZ JAMAIS LE
CACHE (NI L’ARRIÈRE DE L’APPAREIL). CERTAINES
PIÈCES QUIL CONTIENT NE SONT PAS RÉPARABLES
PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN
TECHNICIEN QUALIFIÈ POUR TOUTE RÉPARATION.
Ce symbole indique que
ce produit est fourni
avec des documents
importants relatifs au
fonctionnement et à
l’entretien.
Produit de classeII: ce symbole indique qu'aucun branchement de sécurité à la terre
(prise de terre) n'est requis.
Tension CA: ce symbole indique que la tension nominale indiquée par le symbole est
une tension CA.
Tension CC: ce symbole indique que la tension nominale indiquée par le symbole est
une tension CC.
Mise en garde, Consulter le mode d'emploi: ce symbole avertit l'utilisateur qu'il doit
consulter le manuel d'utilisation pour en savoir plus sur les informations relatives à la
sécurité.
Les fentes et les ouvertures sites à l’arrière
et en dessous de lappareil permettent
d’assurer une ventilation correcte. An
d’assurer le bon fonctionnement de l’appareil
et d’empêcher toute surchauffe, veillez à ne
jamais obstruer ces ouvertures de quelque
façon que ce soit.
Ne placez pas l’appareil dans un endroit
conné comme une bibliothèque ou un
meuble intégré sauf si une ventilation
sufsante y est assurée.
Ne placez pas l’appareil à proximité
ou sur un radiateur ou une bouche
de chaleur et ne l’exposez jamais à la
lumière directe du soleil.
Ne posez pas de récipients contenant
du liquide (ex.: vase, etc.) sur l’appareil
an d’éviter tout risque d’incendie ou
d’électrocution en cas de projections.
Nexposez pas l’appareil à la pluie et ne
le placez pas à côté d’une source d’eau
(baignoire, lavabo, évier, cuve, sous-sol
humide, piscine, etc.). Si l’appareil est exposé
à de l’eau ou à de l’humidité par accident,
débranchez-le et contactez immédiatement
un représentant agréé.
Ne surchargez pas les prises murales, les
rallonges et les adaptateurs an déviter tout
risque d’incendie ou délectrocution.
FRA - 2 FRA - 3
Consignes de Sécuri
Merci d’avoir acheté ce produit (SWA-W700).
ATTENTION
RISQUE DE CHOC ÉLECTRIQUE.
NE PAS OUVRIR
Ce symbole indique la
présence d’une tension
dangereuse dans
l’appareil. Ne touchez
jamais les composants
internes du produit.
ATTENTION: POUR LIMITER LES RISQUES DE
DÉCHARGE ÉLECTRIQUE, NE RETIREZ JAMAIS LE
CACHE (NI L’ARRIÈRE DE L’APPAREIL). CERTAINES
PIÈCES QUIL CONTIENT NE SONT PAS RÉPARABLES
PAR L’UTILISATEUR. VEUILLEZ CONTACTER UN
TECHNICIEN QUALIFIÈ POUR TOUTE RÉPARATION.
Ce symbole indique que
ce produit est fourni
avec des documents
importants relatifs au
fonctionnement et à
l’entretien.
Produit de classeII: ce symbole indique qu'aucun branchement de sécurité à la terre
(prise de terre) n'est requis.
Tension CA: ce symbole indique que la tension nominale indiquée par le symbole est
une tension CA.
Tension CC: ce symbole indique que la tension nominale indiquée par le symbole est
une tension CC.
Mise en garde, Consulter le mode d'emploi: ce symbole avertit l'utilisateur qu'il doit
consulter le manuel d'utilisation pour en savoir plus sur les informations relatives à la
sécurité.
Organisez les câbles de sorte qu’ils ne gênent
pas la circulation dans la pièce ou qu’ils ne
soient pas écrasés par le mobilier attenant.
Assurez-vous toujours que les parties côté
che, prise murale et sortie de l’appareil sont
en bon état.
An de protéger l’appareil de la foudre, ou
si vous prévoyez de ne pas l’utiliser pendant
une période prolongée, débranchez-le. Faites
de même avec l’antenne ou le système de
câblage. Vous éviterez ainsi qu’ils ne soient
endommagés par la foudre ou une surtension.
Avant de brancher le cordon d’alimentationCA
sur la prise de l’adaptateurCC, assurez-vous
que les caractéristiques électriques de
l’adaptateurCC correspondent à lalimentation
électrique locale.
N’insérez jamais dobjets métalliques dans les
ouvertures de l’appareil. Vous risqueriez de
vous électrocuter.
Pour éviter tout risque d’électrocution, ne
touchez jamais les composants internes de
l’appareil. Seul un technicien qualié est
autorisé à ouvrir l’appareil.
Enfoncez correctement la prise dans le
mur. Pour débrancher l’appareil du mur,
tirez toujours sur la che du câble. Ne
tentez jamais de le débrancher en tirant
directement sur le câble. Ne touchez jamais le
cordon d’alimentation si vous avez les mains
mouillées.
Si vous constatez que l’appareil ne fonctionne
pas normalement (bruits ou odeurs
inhabituels), débranchez-le immédiatement
et contactez un revendeur ou un centre de
services agréé.
Entretien du meuble.
Avant de brancher un composant sur cet
appareil, assurez-vous que celui-ci est
hors tension.
Débranchez toujours lappareil si vous
prévoyez de ne pas l’utiliser pendant une
période prolongée (en particulier si des
enfants ou des personnes aux capacités
réduites sont laissées sans surveillance).
L’accumulation de poussière sur l’appareil
risque de provoquer des étincelles, une
surchauffe ou un problème disolation
et de provoquer un choc électrique, une
fuite électrique ou un incendie.
Contactez un centre de services agréé pour
obtenir plus d’informations si vous souhaitez
installer votre produit dans une pièce exposée
à la poussière, à des températures extrêmes,
à l’humidité ou à des substances chimiques
ou dans un endroit où il fonctionnera en
permanence, comme dans un hall d’aéroport
ou de gare. Le non-respect de ces consignes
risque dendommager gravement l’appareil.
Utilisez uniquement une che et une prise
murale correctement mises à la terre.
Une mise à la terre incorrecte peut
provoquer un choc électrique ou
endommager léquipement. (équipement
de classe1 uniquement.)
Pour éteindre complètement l’appareil, vous
devez débrancher le cordon d’alimentation
de la prise murale. Cest pourquoi le cordon
d’alimentation doit être facilement accessible
à tout moment.
Ne laissez jamais les enfants jouer avec
l’appareil.
Conservez les accessoires (piles, etc.) dans un
endroit sûr, hors de leur portée.
Ne posez pas de récipients contenant
du liquide (ex.: vase, etc.) sur l’appareil
an d’éviter tout risque d’incendie ou
d’électrocution en cas de projections.
Nexposez pas l’appareil à la pluie et ne
le placez pas à côté d’une source d’eau
(baignoire, lavabo, évier, cuve, sous-sol
humide, piscine, etc.). Si l’appareil est exposé
à de l’eau ou à de l’humidité par accident,
débranchez-le et contactez immédiatement
un représentant agréé.
Ne surchargez pas les prises murales, les
rallonges et les adaptateurs an déviter tout
risque d’incendie ou délectrocution.
FRA - 4 FRA - 5
N’installez pas le produit dans un endroit
instable, comme sur une étagère branlante,
un sol incliné ou dans un local exposé à des
vibrations.
Ne faites pas tomber l’appareil et ne l’exposez
pas à des chocs. S’il est endomma
débranchez le câble d’alimentation et
contactez le centre de services.
Pour nettoyer l’appareil, débranchez d’abord
le câble d’alimentation de la prise murale,
puis essuyez-le avec un chiffon doux et sec.
N’utilisez pas de produits chimiques, tels que
de la cire, du benzène, de l’alcool, des diluants,
des insecticides, des puricateurs d’air, des
lubriants ou des détergents. Ils risquent
d’endommager le revêtement du produit ou
d’en effacer les inscriptions.
Évitez toute projection d’eau sur l’appareil. Ne
posez jamais d’objets contenant un liquide
(ex: un vase) sur l’appareil.
Ne branchez pas plusieurs appareils
électriques sur une même prise murale.
Surcharger une prise murale peut provoquer
une surchauffe et donc un incendie.
AVERTISSEMENT :
AFIN D’ÉVITER TOUT RISQUE
DE PROPAGATION D’INCENDIE,
ÉLOIGNEZ LES BOUGIES OU LES
AUTRES DISPOSITIFS À FEU NU
DE L’APPAREIL.
Pour réduire les risques dincendie ou de
décharge électrique, veuillez ne pas exposer
cet appareil à la pluie ou à l’humidité.
Précautions
1. Vériez que l’alimentation électrique
CA ou CC de votre logement respecte
les conditions en matière d’alimentation
répertoriées sur l’étiquette d’identication
située au dos de votre produit. Installez
le produit horizontalement, sur une base
adaptée (meuble), en laissant sufsamment
d’espace autour du produit pour une bonne
ventilation (entre 7 et 10 cm). Vériez que les
fentes de ventilation ne sont pas couvertes.
Ne placez pas l’unité sur des haut-parleurs
ou sur tout autre équipement susceptible
de devenir chaud. Cette unité a été conçue
pour une utilisation continue. Pour l’éteindre
complètement, débranchez la prise CA de la
prise murale.
2. Nexposez pas l’unité à la lumière directe du
soleil ou à d’autres sources de chaleur.
Cela pourrait entraîner une surchauffe et des
dysfonctionnements.
3. Débranchez le câble d’alimentation de
la prise murale CA si l’unité présente un
dysfonctionnement. Le produit na pas été
conçu pour une utilisation industrielle, mais
pour une utilisation personnelle uniquement.
De la condensation peut se former si le
produit a été stocké à basse température.
Si vous transportez l’unité en hiver, attendez
environ 2 heures, le temps qu’elle atteigne la
température ambiante, avant de l’utiliser.
4. Si l’alimentation électrique est utilie à
240 V CA, un adaptateur de prise adapté doit
être utilisé.
Consignes de sécuri
importantes
Lisez attentivement ces consignes avant
d’utiliser l’appareil. Veillez à respecter toutes les
consignes répertoriées ci-après. Conservez ces
instructions à portée de main pour vous y référer
ultérieurement.
1. Lisez attentivement ces consignes.
2. Conservez-les précieusement.
3. Tenez compte de tous les avertissements
mentionnés.
4. Respectez toutes les instructions sans
exception.
5. N’utilisez pas cet appareil à proximité de
l’eau.
6. Nettoyez-le à l’aide d’un tissu sec.
7. Ne bloquez pas les ouvertures de ventilation.
Installez l’appareil conformément aux
instructions du fabricant.
8. N’installez pas l’appareil à proximité d’une
source de chaleur de type radiateur, registre
de chaleur, cuisinière ou tout autre appareil
(y compris les récepteurs AV) générateur de
chaleur.
9. Ne désactivez pas le dispositif de sécuri
de la che de mise à la terre ou de la che
polarie. Une che polarisée comporte
deux lames dont l’une est plus large que
l’autre. Une che de mise à la terre comporte
deux lames et une troisième broche de
mise à la terre. La lame la plus large et la
troisième broche sont destinées à assurer
votre sécurité. Si la che fournie ne s’insère
pas dans la prise utilisée, faites appel à un
électricien pour faire remplacer celle-ci.
FRA - 4 FRA - 5
Précautions
1. Vériez que l’alimentation électrique
CA ou CC de votre logement respecte
les conditions en matière d’alimentation
répertoriées sur l’étiquette d’identication
située au dos de votre produit. Installez
le produit horizontalement, sur une base
adaptée (meuble), en laissant sufsamment
d’espace autour du produit pour une bonne
ventilation (entre 7 et 10 cm). Vériez que les
fentes de ventilation ne sont pas couvertes.
Ne placez pas l’unité sur des haut-parleurs
ou sur tout autre équipement susceptible
de devenir chaud. Cette unité a été conçue
pour une utilisation continue. Pour l’éteindre
complètement, débranchez la prise CA de la
prise murale.
2. Nexposez pas l’unité à la lumière directe du
soleil ou à d’autres sources de chaleur.
Cela pourrait entraîner une surchauffe et des
dysfonctionnements.
3. Débranchez le câble d’alimentation de
la prise murale CA si l’unité présente un
dysfonctionnement. Le produit na pas été
conçu pour une utilisation industrielle, mais
pour une utilisation personnelle uniquement.
De la condensation peut se former si le
produit a été stocké à basse température.
Si vous transportez l’unité en hiver, attendez
environ 2 heures, le temps qu’elle atteigne la
température ambiante, avant de l’utiliser.
4. Si l’alimentation électrique est utilie à
240 V CA, un adaptateur de prise adapté doit
être utilisé.
Consignes de sécuri
importantes
Lisez attentivement ces consignes avant
d’utiliser l’appareil. Veillez à respecter toutes les
consignes répertoriées ci-après. Conservez ces
instructions à portée de main pour vous y référer
ultérieurement.
1. Lisez attentivement ces consignes.
2. Conservez-les précieusement.
3. Tenez compte de tous les avertissements
mentionnés.
4. Respectez toutes les instructions sans
exception.
5. N’utilisez pas cet appareil à proximité de
l’eau.
6. Nettoyez-le à l’aide d’un tissu sec.
7. Ne bloquez pas les ouvertures de ventilation.
Installez l’appareil conformément aux
instructions du fabricant.
8. N’installez pas l’appareil à proximité d’une
source de chaleur de type radiateur, registre
de chaleur, cuisinière ou tout autre appareil
(y compris les récepteurs AV) générateur de
chaleur.
9. Ne désactivez pas le dispositif de sécuri
de la che de mise à la terre ou de la che
polarie. Une che polarisée comporte
deux lames dont l’une est plus large que
l’autre. Une che de mise à la terre comporte
deux lames et une troisième broche de
mise à la terre. La lame la plus large et la
troisième broche sont destinées à assurer
votre sécurité. Si la che fournie ne s’insère
pas dans la prise utilisée, faites appel à un
électricien pour faire remplacer celle-ci.
10. Placez le cordon d’alimentation de sorte
qu’il ne puisse être ni piétiné ni pincé,
particulièrement au niveau de la che, de
la prise de courant et du point de sortie du
cordon de l’appareil.
11. Utilisez exclusivement les xations/
accessoires spéciés par le fabricant.
12. Utilisez exclusivement
le meuble à roulettes, le
socle, le trépied, le support
ou la table recommandés
par le fabricant ou vendus
avec l’appareil. Si l’appareil est posé sur un
meuble à roulettes, déplacez l’ensemble
avec précaution pour éviter de faire tomber
l’appareil et de vous blesser.
13. Débranchez l’appareil en cas d’orage ou
lorsqu’il est inutilisé pendant une période
prolongée.
14. Conez toutes les réparations à un
technicien qualié. Votre appareil doit
impérativement être réparé lorsqu’il a
été endommagé de quelque manière que
ce soit: détérioration du cordon ou de la
che d’alimentation, projection de liquide
sur l’appareil, chute d’objets à l’intérieur
de l’appareil, exposition à la pluie ou à
l’humidité, dysfonctionnement, chute.
FRA - 6 FRA - 7
Vérication des composants
WIRELESS
Subwoofer de la barre audio Sound
+
Cordon d’alimentation Clé électronique sans
l (WHM520V)
Vis (2EA)
Support de clé électronique
(Fixation verticale)
Support de clé électronique
(Fixation murale / Fixation unique)
La clé électronique sans l est uniquement compatible avec les Soundbars Samsung.
Pour une liste des Soundbars Samsung compatibles, reportez-vous à la page 11.
Ne connectez pas la clé électronique à un autre appareil, comme un smartphone, un ordinateur de
bureau ou un ordinateur portable.
Spécications
Poids 14,6 kg
Dimensions (L x H x P) 320,0 X 338,3 X 320,0 mm
Plage de températures de fonctionnement +5°C à +35°C
Plage de taux d’humidité de fonctionnement 10% ~ 75%
Enceinte Subwoofer x 1, 254,0 mm, 4 ohms
Puissance de sortie de
l’appareil sans l
Puissance de
transmission SRD max.
25 mW à 5,725 GHz – 5,825 GHz
REMARQUES
Samsung Electronics Co., Ltd se réserve le droit de modier les caractéristiques sans préavis.
Le poids et les dimensions sont approximatifs.
Pour plus d’informations sur l’alimentation et la consommation électriques, reportez-vous à
l’étiquette collée sur le produit.
La présentation et les spécications peuvent faire l’objet de modications sans préavis.
Avis de licence libre
Pour toute requête et demande concernant les sources ouvertes, contactez Samsung via e-mail à
l’adresse (oss.request@samsung.com).
Ce produit utilise certains programmes logiciels qui sont distribués sous la licence publique
générale modiée de FreeRTOS.
Logiciel sous licence publique générale : FreeRTOS
Licence publique générale modiée de FreeRTOS
http://www.freertos.org/license.txt
Remarque Importante à Propos du Service
Des frais supplémentaires pourront vous être facturés dans les cas suivants:
(a) Vous demandez l’intervention d’un ingénieur, mais il s’avère que l’appareil ne présente aucune
anomalie (par ex. vous n’avez pas lu ce Manuel d’utilisation).
(b) Vous portez l’unité à un centre de réparation, mais il s’avère que celle-ci ne présente aucune
défaillance (par ex. vous navez pas lu ce Manuel d’utilisation).
Le montant de ces frais administratifs vous sera notié avant que tout travail ou toute visite à votre
domicile ne soit effectuée).
Connexion du SWA-W700 à une Soundbar
1. Vériez l’état de veille après le branchement à une prise électrique
Branchez le cordon dalimentation du subwoofer sans l à une prise électrique et au subwoofer
sans l pour allumer le subwoofer sans l. Le voyant LINK LED (LED bleue) sur le subwoofer sans l
clignote. Si la LED ne clignote pas, consultez l’étape 7 de la page 10.
Bas du subwoofer sans l Avant du subwoofer sans l
ID SET
POWER
LINK
SERVICE
POWER
ID SET
POWER
LINK
SERVICE
POWER
Clignotement
bleu
L’unité principale est lourde. Faites attention de ne pas vous pincer les doigts lorsque vous appuyez
sur le bouton ID SET ou lorsque vous connectez le cordon d’alimentation sur la partie inférieure.
La partie supérieure du subwoofer est sujette aux rayures. Manipulez-le avec précaution.
Unité D’enceinte
Arrière du subwoofer sans l
Nexercez pas de pression et ne donnez aucun coup
à la Unité D’enceinte à l’arrière de l’appareil. Vous
risquez de déformer ou d’endommager l’enceinte.
FRA - 6 FRA - 7
Vérication des composants
WIRELESS
Subwoofer de la barre audio Sound
+
Cordon d’alimentation Clé électronique sans
l (WHM520V)
Vis (2EA)
Support de clé électronique
(Fixation verticale)
Support de clé électronique
(Fixation murale / Fixation unique)
La clé électronique sans l est uniquement compatible avec les Soundbars Samsung.
Pour une liste des Soundbars Samsung compatibles, reportez-vous à la page 11.
Ne connectez pas la clé électronique à un autre appareil, comme un smartphone, un ordinateur de
bureau ou un ordinateur portable.
Spécications
Poids 14,6 kg
Dimensions (L x H x P) 320,0 X 338,3 X 320,0 mm
Plage de températures de fonctionnement +5°C à +35°C
Plage de taux d’humidité de fonctionnement 10% ~ 75%
Enceinte Subwoofer x 1, 254,0 mm, 4 ohms
Puissance de sortie de
l’appareil sans l
Puissance de
transmission SRD max.
25 mW à 5,725 GHz – 5,825 GHz
REMARQUES
Samsung Electronics Co., Ltd se réserve le droit de modier les caractéristiques sans préavis.
Le poids et les dimensions sont approximatifs.
Pour plus d’informations sur l’alimentation et la consommation électriques, reportez-vous à
l’étiquette collée sur le produit.
La présentation et les spécications peuvent faire l’objet de modications sans préavis.
Avis de licence libre
Pour toute requête et demande concernant les sources ouvertes, contactez Samsung via e-mail à
l’adresse (oss.request@samsung.com).
Ce produit utilise certains programmes logiciels qui sont distribués sous la licence publique
générale modiée de FreeRTOS.
Logiciel sous licence publique générale : FreeRTOS
Licence publique générale modiée de FreeRTOS
http://www.freertos.org/license.txt
Remarque Importante à Propos du Service
Des frais supplémentaires pourront vous être facturés dans les cas suivants:
(a) Vous demandez l’intervention d’un ingénieur, mais il s’avère que l’appareil ne présente aucune
anomalie (par ex. vous n’avez pas lu ce Manuel d’utilisation).
(b) Vous portez l’unité à un centre de réparation, mais il s’avère que celle-ci ne présente aucune
défaillance (par ex. vous navez pas lu ce Manuel d’utilisation).
Le montant de ces frais administratifs vous sera notié avant que tout travail ou toute visite à votre
domicile ne soit effectuée).
Connexion du SWA-W700 à une Soundbar
1. Vériez l’état de veille après le branchement à une prise électrique
Branchez le cordon dalimentation du subwoofer sans l à une prise électrique et au subwoofer
sans l pour allumer le subwoofer sans l. Le voyant LINK LED (LED bleue) sur le subwoofer sans l
clignote. Si la LED ne clignote pas, consultez l’étape 7 de la page 10.
Bas du subwoofer sans l Avant du subwoofer sans l
ID SET
POWER
LINK
SERVICE
POWER
ID SET
POWER
LINK
SERVICE
POWER
Clignotement
bleu
L’unité principale est lourde. Faites attention de ne pas vous pincer les doigts lorsque vous appuyez
sur le bouton ID SET ou lorsque vous connectez le cordon d’alimentation sur la partie inférieure.
La partie supérieure du subwoofer est sujette aux rayures. Manipulez-le avec précaution.
Unité D’enceinte
Arrière du subwoofer sans l
Nexercez pas de pression et ne donnez aucun coup
à la Unité D’enceinte à l’arrière de l’appareil. Vous
risquez de déformer ou d’endommager l’enceinte.
FRA - 8 FRA - 9
2. Connexion de l’unité principale de la Soundbar à la clé
électronique sans l
Connectez la clé électronique sans l au port « WIRELESS » situé sur l’unité principale de la
Soundbar.
Lors de l’insertion de la clé électronique dans le support, assurez-vous que le logo « WIRELESS »
est tourné vers le haut, comme indiqué sur l’image ci-dessous.
WIRELESS
WIRELESS
WIRELESS
1
2
Fixation verticale
WIRELESS
WIRELESS
WIRELESS
1
2
Fixation murale
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
Fixation unique (WMN300SB, non fourni)
Ne retirez pas la clé électronique sans l de la Soundbar principale.
La clé électronique sans l fournie avec le produit peut être utilisée avec le kit d’enceintes
arrière sans l optionnel.
3. Éteindre la Soundbar
Éteignez la Soundbar avec la télécommande de la Soundbar ou en appuyant sur le bouton
(Alimentation) sur la Soundbar principale.
BYE
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
Les images de la Soundbar visibles sur cette page peuvent être différentes de votre Soundbar,
selon le modèle.
4. Congurer « ID SET » à l’aide de la télécommande de la
Soundbar
Appuyez sur le bouton VOL de votre télécommande pendant 5 à 6 secondes jusqu’à ce que le
message « ID SET » s’afche sur l’écran de votre Soundbar.
VOL
SOUNDBAR
ID
SET
5 Sec
5. Allumer la Soundbar
Allumez la Soundbar à l’aide de la télécommande de la Soundbar ou en appuyant sur le bouton
(Alimentation) situé sur la Soundbar principale.
ON
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
FRA - 8 FRA - 9
2. Connexion de l’unité principale de la Soundbar à la clé
électronique sans l
Connectez la clé électronique sans l au port « WIRELESS » situé sur l’unité principale de la
Soundbar.
Lors de l’insertion de la clé électronique dans le support, assurez-vous que le logo « WIRELESS »
est tourné vers le haut, comme indiqué sur l’image ci-dessous.
WIRELESS
WIRELESS
WIRELESS
1
2
Fixation verticale
WIRELESS
WIRELESS
WIRELESS
1
2
Fixation murale
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS5XX/HW-MS6XX/HW-MS65XX
WIRELESS
WIRELESS
WIRELESS
WIRELESS
HW-MS7XX
Fixation unique (WMN300SB, non fourni)
Ne retirez pas la clé électronique sans l de la Soundbar principale.
La clé électronique sans l fournie avec le produit peut être utilisée avec le kit d’enceintes
arrière sans l optionnel.
3. Éteindre la Soundbar
Éteignez la Soundbar avec la télécommande de la Soundbar ou en appuyant sur le bouton
(Alimentation) sur la Soundbar principale.
BYE
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
Les images de la Soundbar visibles sur cette page peuvent être différentes de votre Soundbar,
selon le modèle.
4. Congurer « ID SET » à l’aide de la télécommande de la
Soundbar
Appuyez sur le bouton VOL de votre télécommande pendant 5 à 6 secondes jusqu’à ce que le
message « ID SET » s’afche sur l’écran de votre Soundbar.
VOL
SOUNDBAR
ID
SET
5 Sec
5. Allumer la Soundbar
Allumez la Soundbar à l’aide de la télécommande de la Soundbar ou en appuyant sur le bouton
(Alimentation) situé sur la Soundbar principale.
ON
Surround
VOL BASS
SOUNDBAR
SOUND
MODE
SMART
MODE
FRA - 10 FRA - 11
6. Vériez que le voyant LED LINK séclaire en bleu en continu
(connexion établie)
Avant du subwoofer sans l
Cesse de clignoter.
Reste allumé en bleu.
Le voyant LINK LED arrête de clignoter
et séclaire en bleu en continu
lorsqu’une connexion est établie entre
la Soundbar et le subwoofer sans l.
7. Si le SWA-W700 ne se connecte pas, suivez les étapes
nécessaires selon l’état du voyant LED
État LED Action
Bleu
Allumé
Connecté avec la
Soundbar
-
Clignotement
État de veille de la
connexion
Vériez que la Soundbar est allumée.
Répétez les étapes 3 à 6.
Rouge Allumé
Échec de la
connexion
Vériez que la Soundbar est allumée.
1. Appuyez sur le bouton ID SET sur la
partie inférieure du subwoofer sans
l avec l’extrémité d’un stylo pendant
5 à 6 secondes jusqu’à ce que le
voyant LINK LED clignote (en bleu).
ID SET
POWER
LINK
SERVICE
ID SET LINK
5 Sec
2. tez les étapes 3 à 6.
Autres - Erreurs
Contactez un service après-vente
Samsung.
Moles compatibles
HW-MS550 HW-MS55C HW-MS570 HW-MS57C HW-MS560
HW-MS650 HW-MS651 HW-MS6500 HW-MS6501 HW-MS660
HW-MS661 HW-MS6510 HW-MS6511 HW-MS750 HW-MS751
HW-MS760 HW-MS761
La liste des modèles est sujette à modications sans avis préalable.
Samsung Electronics déclare par la présente que cet équipement est conforme à la
directive 2014/53/UE.
Le texte complet de la déclaration de conformité de l’UE est disponible à ladresse
Internet suivante : http://www.samsung.com, puis allez dans Assistance > Sélectionner
un produit et saisissez le nom de modèle. Cet équipement peut fonctionner dans tous
les pays de l’Union européenne.
Les bons gestes de mise au rebut de ce produit
(Déchets d’équipements électriques & électroniques)
(Applicable aux pays disposant de systèmes de collecte séparés)
Ce symbole sur le produit, ses accessoires ou sa documentation indique que ni le produit, ni ses
accessoires électroniques usagés (chargeur, casque audio, câble USB, etc.) ne peuvent être jetés
avec les autres déchets ménagers. La mise au rebut incontrôlée des déchets présentant des risques
environnementaux et de santé publique, veuillez séparer vos produits et accessoires usagés des
autres déchets. Vous favoriserez ainsi le recyclage de la matière qui les compose dans le cadre d’un
développement durable.
Les particuliers sont invités à contacter le magasin leur ayant vendu le produit ou à se renseigner
auprès des autorités locales pour connaître les procédures et les points de collecte de ces produits
en vue de leur recyclage.
Les entreprises et particuliers sont invités à contacter leurs fournisseurs et à consulter les conditions
de leur contrat de vente. Ce produit et ses accessoires ne peuvent être jetés avec les autres déchets.
Pour obtenir des informations sur les engagements environnementaux de Samsung et sur les
obligations glementaires spéciques à l'appareil (par ex. la réglementation REACH), rendez-vous sur :
samsung.com/uk/aboutsamsung/samsungelectronics/corporatecitizenship/data_corner.html
1 / 1