WASHING MACHINE CANDY CTS 82
A PROGRAMME/TEMPERATURE SELECTOR
B1 WASH TEMPERATURE SELECTOR
C1 SPIN REDUCTION
C2 EXTRA RINSE
H START/STOP KEY
p CONTROL POSITION INDICATOR
A
C1
B
1
C2 H
p
230 V. /
50 Hz.
175 W.
Table of programmes mod.CTS 82
* Programme as per EN 60456
Technical data mod. CTS 82
170
140
134
80
54
30
7
95
86
72
43
4
63
54
48
34
4
4
32
800
800
800
800
800
800
800
800
800
800
800
800
400
800
800
800
800
800
90º
90º
60º
40º
60º
50º
40º
40º
40º
30º
50º
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1. fast coloureds with prewash
2. fast coloureds
*3. fast coloureds
4. delicate coloureds
bleach/whitener
vigorous rinse
vigorous spin
5. mixed synthetics
6. coloureds
7. acrylics
gentle rinse
gentle spin
8. delicates
9. woolmark woollens
10. hand wash
gentle rinse
gentle spin
empty
fast 32 min.
III
COTTONS
SYNTHETICS
DELICATES
SPECIAL
340 W. 30 W. 1950 W. 2200 W. 10 A. 0,05-0,8
Mpa
48 l. 1,03 Kw/h.
programme programme for
aprox.
time
min.
Máx. temp.
setting
ºC
Máx.
spin
speed
Máx.
load
kg
Washing powder load Option keys C
Mains
voltage
Wash
power
rating
Spin
power
rating
Pump
motor
power
rating
Heating
element
power rating
Max.
power
input
Mains fuse
amp. rating
Water
pressure
Water
consumption
* prog.
EN 60456
Energy
consumption
* prog.
EN 60456
5
5
5
5
5
2
2
2
1,5
1
2
2
PREPARING THE WASH CYCLE
1.- Once the washing is loaded, ensure that the drum doors are properly closed.
2.- Add detergent and additives, not exceeding the maximum level indicator.
• detergent for pre-wash I
• detergent for wash programme II
• bleach
• fabric conditioner
SELECTING THE DESIRED PROGRAMMES AND OPTIONS
3.- Tu rn the programme selector (A) to the desired programme. (clokwise).
4.- Press the key or keys for any options desired (C1, C2).
C1: spin reduction key
This reduces spin speed to the figures indicated (400) at the press of the key.
C2: extra rinse key
The electronic system engaged by this key activates a new special rinse cycle. More water
and a combination of drum rotation movements ensure that washing is perfectly rinsed. The key
can be activated in Cottons, Mixed, Synthetics and Delicates programmes.
5.- Select wash temperature if required (B1)
B1 temperature selector
Use this control to select the wash temperature within the range for the programme selected
(see programme table).
The control can be turned in both directions. Select the required temperature before starting
the programme.
6.- Once you have selected the desired options, press the START key (H). The washing machine
will start up . To cancel an option after setting, just press the option key again.
To change or cancel a programme
To change or cancel a programme once the programme selected has started, proceed as follows:
- Press the key (H). The programme has been cancelled, and another may be selected.
- Select the new programme.
- Press (H) again.
- The machine will then run the new programme selected
Programme Pause
To pause the wash programme so that more washing can be added, proceed as follows:
- Hold down the key (H). When the door lock disengages (after approx. 2 minutes), open the
door and put the additional washing into the drum.
- Close the door and press (H) again.
- The machine will continue with the programme.
END OF PROGRAMME
For safety’s sake, set the programme selector or the start/stop key to OFF when the programme
ends.
12-04 / 46002007/ EN
-
1
-
2
-
3
-
4
