Samsung HW-J7501R Guida Rapida

Marca: Samsung

Modello: HW-J7501R

Categoria: Altoparlanti della soundbar

Tipo: Guida Rapida

HW-J7500R

HW-J7501R

For further information, refer to the Web Manual.

Web manual : www.Samsung.com

Support

Product name search HW-J7500R or HW-J7501R

User Manual

· 2 · English

SAFETY INFORMATION

SAFETY WARNINGS

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).

NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This symbol indicates that high voltage is

present inside. It is dangerous to make any

kind of contact with any internal part of this

product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

Class II product : This symbol indicates that it does not require a safety connection to electrical

earth (ground).

AC voltage : This symbol indicates that the rated voltage marked with the symbol is AC

voltage.

DC voltage : This symbol indicates that the rated voltage marked with the symbol is DC

voltage.

Caution, Consult instructions for use : This symbol instructs the user to consult the user

manual for further safety related information.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

• This apparatus shall always be connected to a AC outlet with a protective grounding connection.

• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the

mains plug shall be readily operable.

CAUTION

• Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases on

the apparatus.

• To turn this apparatus off completely, you must pull the power plug out of the wall socket. Consequently, the

power plug must be easily and readily accessible at all times.

· 3 · English

PRECAUTIONS

1. Ensure that the AC power supply in your house complies with the power requirements listed on the

identification sticker located on the rear of your product. Install your product horizontally, on a suitable base

(furniture), with enough space around it for ventilation (7~10 cm). Make sure the ventilation slots are not

covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is

designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet. Unplug the

unit if you intend to leave it unused for a long period of time.

2. During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could

damage the unit.

3. Do not expose the unit to direct sunlight or other heat sources. This could lead to overheating and cause the

unit to malfunction.

4. Protect the product from moisture (i.e. vases), and excess heat (e.g. a fireplace) or equipment creating strong

magnetic or electric fields. Unplug the power cable from the AC wall socket if the unit malfunctions. Your

product is not intended for industrial use. It is for personal use only. Condensation may occur if your product

has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours

until the unit has reached room temperature before using.

5. The battery used with this product contains chemicals that are harmful to the environment.

Do not dispose of the battery in the general household trash. Do not expose the battery to excess heat,

direct sunlight, or fire. Do not short circuit, disassemble, or overheat the battery. Danger of explosion if the

battery is replaced incorrectly. Replace only with the same or equivalent type.

WARNING: DO NOT INGEST BATTERY. CHEMICAL BURN HAZARD.

The remote control supplied withthis product contains a coin/button cell battery. If the coin/button cell battery is

swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries

away from children. If the battery compartment does not close securely, stop using the product and keep it away from

children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate

medical attention.

· 4 · English

CHECKING THE COMPONENTS

Subwoofer

Remote Control /

Battery

HDMI Cable

1 Power Cord

Soundbar Main Unit

2 AC/DC Adapter 3 Power Cord

c Use Cat 7 (*STP Type) cable for the connection.

* Shielded Twist Pair

CONNECTING ELECTRICAL POWER

Use the power components (1, 2, 3) to connect the power supplies in the following order:

Subwoofer  Soundbar Main Unit

c For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of Soundbar main unit)

POWER

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

DC 24V

(Power Jack)

Connecting electrical power

1 Power Cord

2 AC/DC Adapter

3 Power Cord

Rear of Subwoofer

Rear of the Soundbar Main Unit

c Make sure to rest the AC/DC Adapter flat on a table or the floor. If you place the AC/DC Adapter so that it is

hanging with the AC cord input facing upwards, water or other foreign substances could enter the Adapter

and cause the Adapter to malfunction.

· 5 · English

CONNECTING THE SUBWOOFER TO THE SOUNDBAR

MAIN UNIT

You can enjoy rich bass tones and better sound quality by linking the subwoofer to the Soundbar main unit.

Subwoofer

Soundbar Main Unit

Unit

The Soundbar main unit and subwoofer should link (connect wirelessly) automatically when the Soundbar main

unit and subwoofer are turned on. When auto-connection is complete, the blue indicator on the front of the

subwoofer stops blinking and glows blue continuously.

c If the indicator on the front of the subwoofer displays in red or flashes in blue, the subwoofer has not

automatically connected. If this occurs, follow the directions below to connect the subwoofer manually.

c Important: Before you begin, put the battery into the remote. See page 17 for instructions.

POWER

1. Plug the power cords of the Soundbar main unit and subwoofer into an AC wall outlet.

2. Press the ID SET button on the rear of the subwoofer for 5 seconds. The red indicator on the front of the

subwoofer turns off and the blue indicator flashes rapidly.

3. Press the

button on your remote control for 5 seconds while the Soundbar main unit is turned OFF.

4. The ID SET message appears on the display of the Soundbar main unit for a short period of time, and then

disappears.

ID SET

5. While the subwoofer's indicator is flashing blue, press the button on your remote control or on the top of

the Soundbar main unit to turn on the Soundbar main unit.

6. The connection is complete if the indicator on the front of the subwoofer stops flashing and glows

continuously.

c If the connection process fails, the blue indicator will flash continuously. Go to Step 2 and start again.

· 6 · English

CONNECTING TO YOUR TV

You can enjoy TV sound after connecting the Soundbar to your TV with or without a cable.

c Important: Before you begin, put the battery into the remote. See page 17 for instructions.

Method 1. Connecting with a Cable

HDMI OUT

(TV-ARC)

Bottom of Soundbar

HDMI IN

(TV-ARC)

Soundbar

HDMI Cable

Check the HDMI OUT (TV-ARC)

port of the Soundbar main unit.

Check the (TV-ARC) at

HDMI IN port of your TV.

1. Connect the HDMI cable as in the picture above.

2. TV ARC appears on display of the product and TV sound is output.

TV ARC

c If TV sound is not output, press the button on the top of your Soundbar or the SOURCE button on the

remote control to select the D.IN mode on Soundbar main unit display. Then, the D.IN mode is changed to

TV ARC and TV sound is output.

c If the Soundbar main unit display does not change to TV ARC, check the cable connections.

c You can conveniently control the volume of the Soundbar and interlock power supply.

· 7 · English

Method 2. TV SoundConnect (Linking to a Samsung TV with Bluetooth)

1. Turn on your Samsung TV and the Soundbar.

2. Select TV mode in your Soundbar display by pressing the

button on the top of the Soundbar or the

SOURCE button on your remote control. (Modes are displayed in the following order: D.IN → AUX → HDMI

→ BT → TV.)

3. When the connection message shown below appears on the TV screen, select <Yes> with your TV remote

control.

Samsung Audio Device detected.

Do you want to hear TV sound

through this device?

Yes No

Select <Yes> with your TV remote control.

4. The Soundbar outputs TV sound.

c If the TV SoundConnect linking process fails, navigate to SoundConnect in the TV's Sound menu, select

Add New Device, and set Add New Device to ON. Then, try again.

c If your Soundbar is connected to your TV through TV SoundConnect, you can conveniently control the

volume with the Soundbar's remote or the TV's remote.

c The TV SoundConnect (Soundshare) function is only available in some Samsung TV products released since

2012.

c If you want to disconnect the existing connection to your TV and establish a new connection to another TV,

press the & button on your remote control for more than 5 seconds.

c In the TV SoundConnect mode, the Soundbar cannot be paired to another Bluetooth device.

c Do not place electronic devices or metallic objects on top of the product.

e.g., Wired/wireless router, set-top box, or modem.

c Placing the product on the floor may degrade wireless network performance, depending on the floor material.

· 8 · English

Method 3. Connecting to a Wireless Network

Installing the Samsung Multiroom App and Connecting Wirelessly

To install Samsung Multiroom app for the first time, follow

the steps shown below.

1. Press and hold the SPK ADD button on the rear of the

Soundbar for more than 1 second.

• There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main

unit. Afterwards, the message “WIFI READY” appears

when standby-for-connection mode activates.

2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.

Samsung

Multiroom

Internet Wireless Router Smart Device

3. Install the Samsung Multiroom app on your smart device (smart phone, tablet, etc.).

4. Launch the Samsung Multiroom app.

Android iOS

Samsung Multiroom app

Samsung

Multiroom

5. Complete the initial settings by following the instructions on the app screen.

Complete the settings

by following the

instructions on the

Samsung Multiroom

app screen.

Start screen Entering the password

for the wireless router

Speaker connection

complete

c Y

ou must enter the password of your wireless router to connect your Soundbar to your wireless network

through Samsung Multiroom app.

c If your wireless router has no designated password, the app completes the initial settings without asking you

to enter a password.

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

SPK ADDWi-Fi SETUP

DC 24V

Rear of Soundbar

· 9 · English

Adding the Soundbar to an Existing Multiroom Audio System

If the Samsung Multiroom app is already installed for use with

another multiroom audio device, follow these steps to add the

Soundbar.

1. Press and hold the SPK ADD button on the rear of the

Soundbar for more than 1 second.

• There is a notification sound and the message

“ADD SPEAKER” appears on the Soundbar’s main

unit. Afterwards, the message “WIFI READY” appears

when standby-for-connection mode activates.

2. Connect your smart device (smart phone, tablet, etc.) to your wireless router.

Samsung

Multiroom

Internet Wireless Router Smart Device

3. Launch the Samsung Multiroom app.

4. Touch

to go to the list of all speakers.

5. Select More > Add New Speaker in the app, and then follow the instructions on the app screen.

Complete the settings

by following the

instructions on the

Samsung Multiroom

app screen.

Start screen Selection of network

Speaker addition

complete

c To connect a different network, select No.

You must enter the password of your wireless router to connect your Soundbar to your wireless network

through the Samsung Multiroom app.

If your wireless router does not have a designated password, the app completes the initial settings without

asking you to enter a password.

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

SPK ADDWi-Fi SETUP

DC 24V

Rear of Soundbar

· 10 · English

Connecting the Soundbar to your Samsung Smart TV

You can connect your TV to the Soundbar through a wireless network and enjoy the TV sound.

c Important: Make sure that the TV and Soundbar are connected to the same network.

(How to check your Samsung TV network : Home menu  Network  Network Status)

Configuring Settings from your Samsung Smart TV

c To play sound via the Soundbar, make sure that your TV model supports the Multiroom feature

(Samsung Smart TVs released after 2014).

c If the TV is disconnected from the wireless network due to a change to the input source of the Soundbar,

use the TV menu to re-establish the connection.

 For TVs released in 2016

1. Home menu  Settings ( )  Sound  Sound Output  Select [Samsung] HW-Jxxxx (Wi-Fi)

2. TV sound is output.

 For TVs released in 2015

1. Home menu



Sound

 Speaker List 

Select [Samsung] HW-Jxxxx (Wi-Fi)

2. TV sound is output.

 For TVs released in 2014

1. Home menu



Sound

 Speaker Settings 

Select

Multiroom Link - Settings  Soundbar+Surround

2. From the Soundbar position, select "J7500" and select "OK".

3. Home menu



Sound

 Speaker Settings 

Select

TV Sound Output  Multiroom Link

TV Speaker

•

TV Installation Type

Stand

TV SoundConnect

• Samsung Audio Device List

• Add New Device

Multiroom Link

• Settings

Soundbar+Surround

Bluetooth headphone

• Bluetooth headphone List

Speaker Settings

TV Sound Output Multiroom Link

󰟵

󰟳

Multiroom Link

OK Volume Level Speaker Test

Soundbar

[Samsung] HW-J7500

Soundbar+Surround

[Samsung] HW-J7500

Don't Use

󰟴

Edit Na

4. TV sound is output.

· 11 · English

Connecting Samsung Multiroom Audio System to the Surround

You can enjoy three-dimensional sound in surround mode after connecting two Multiroom Audios and a

Soundbar.

c Surround connection between a Multiroom Audio and a Soundbar is unavailable.

1. Touch

to go to the list of all speakers.

2. Touch

on the right of the Soundbar model name.

3. Touch Surround Setup. Select Done after dragging the speaker to the desired location.

4. Surround connection is completed.

Soundbar

c Refer to the web manual for connection between the TV and the surround.

· 12 · English

CONNECTION VIA BLUETOOTH

You can connect a Bluetooth device to the Soundbar and enjoy music with stereo sound, all without wires!

c It is not possible to connect multiple Bluetooth devices at the same time.

Connect

Bluetooth device

1. Press the

button on the top of the Soundbar or the SOURCE button on the remote control to select BT.

2. Select the Bluetooth menu on the Bluetooth device you want to connect. (Refer to the Bluetooth device's

user manual.)

3. Select "[Samsung] HW-Jxxxx" from the list.

• When the connection is established between the Soundbar and Bluetooth device, the front display

window of the Soundbar displays [Bluetooth device name] → BT.

4. Play music on the connected device.

[If failed to connect to the Bluetooth device / If device searching is needed again]

• Delete the previous "[Samsung] HW-Jxxxx" found by the Bluetooth device and have it search for the

Soundbar again.

c If asked for a PIN code when connecting a Bluetooth device, enter <0000>.

c In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Soundbar

and the Bluetooth device exceeds 10 meters.

c The Soundbar automatically turns off after 15 minutes in the Ready state.

c The Soundbar may not perform Bluetooth search or connection correctly under the following

circumstances:

If there is a strong electrical field around the Soundbar.

If several Bluetooth devices are simultaneously paired with the Soundbar.

If the Bluetooth device is turned off, not in place, or malfunctions.

c Electronic devices may cause radio interference. Devices that generate electromagnetic waves must be

kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.

Disconnecting the Soundbar from the Bluetooth device

Press the SOURCE button on the remote control or the button on the product's

top

to switch from BT to

another mode or turn off the Soundbar.

• The connected Bluetooth device will wait a certain amount of time for a response from the Soundbar before

terminating the connection. (Disconnection time may differ, depending on the Bluetooth device)

· 13 · English

CONNECTING TO AN EXTERNAL DEVICE

You can enjoy sound from separate external devices such as a BD player/game console/set-top box, etc. by

connecting them to your Soundbar.

HDMI OUT

(TV-ARC)

HDMI IN

HDMI Cable

External

Device

Soundbar

HDMI OUT

HDMI IN

Bottom of Soundbar

1. Connect the HDMI cable as in the picture above.

2. Press the

button on top of your Soundbar or the SOURCE button on your remote control to select

HDMI mode.

3. The Soundbar shows HDMI on its display and output sound.

· 14 · English

SOFTWARE UPDATE

Samsung may offer updates for the Soundbar's

system firmware in the future.

Auto Update

The automatic update function is enabled on the

Soundbar by default. Automatic firmware updates are

searched for and performed if the Soundbar is

connected to the Internet, irrespective of whether it is

turned on or off.

c To use the Auto Update function, the Soundbar

must be connected to the Internet.

The Wi-Fi connection to the Soundbar will be

terminated if its power cord is disconnected or the

power is cut off. If the power is cut off, turn on the

Soundbar and reconnect it.

Updating with USB

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

If an update is offered, you can update the firmware

by connecting a USB device with the firmware update

stored on it to the USB port on your Soundbar.

For more information about how to download update

files, go to the Samsung Electronics website at

(samsung.com/sec)  search for the model name 

download the firmware from the customer support

menu option. The option name can vary.

INSTALLING THE WALL

MOUNT

I nstallation Precautions

• Install on a vertical wall only.

• Do not install the Soundbar system in a location

with high temperature and/or humidity. Install the

system on a stable wall that can bear the weight of

the Soundbar main unit.

• Check the strength of the wall. To install the

Soundbar system on a wall that may not bear the

Soundbar main unit weight, reinforce the wall

before installation. If this is not possible, install the

system on another wall, one stable enough to bear

the weight of the Soundbar main unit.

• Purchase and use the fixing screws or anchors

appropriate for the kind of wall you have (plaster

board, iron board, wood, etc.). If possible, fix the

support screws into wall studs.

• Purchase wall mounting screws according to the

type and thickness of the wall you will mount the

Soundbar on.

Diameter : M5

Length: 35 mm or longer recommended.

• Connect cables from the unit to external devices

before you install it on the wall.

• Make sure the unit is turned off and unplugged

before you install it. Otherwise, it may cause an

electric shock.

· 15 · English

For Soundbar Main Unit (Wallmount

Components)

Holder-Screw 1 (4 EA)

Holder-Screw 2

(for Soundbar main unit

fixing) (4 EA)

Wall-Mount Bracket

Holder-Fix Mount

(for wall-mount fixing)

1. Place the Soundbar as shown in the illustration,

ensuring that none of the buttons touch the

surface it is lying on.

2. If the Holder-Foot (3 EA) and Holder-Support

(2 EA) are attached, remove them.

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

󰟴

󰟳

Holder-Foot Holder-Support

3. Fix Holder-Screw 1 (4 EA) and Holder-Screw 2

(for Soundbar main unit fixing) (4 EA) into the holes

of the Soundbar tightly as shown in the illustration.

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

SERVICE

SPK ADDWi-Fi SETUP

DC 24V

AUX IN

LAN HDMI IN OPTICAL IN

HDMI OUT

(TV-ARC)

4. Insert the Wall-Mount Screws into the 3 holes

one by one to fix the Wall-Mount Bracket on the

wall.

Wall

c Recommended screw : M5

· 16 · English

5. Mount the Soundbar on the Wall-Mount Bracket

in order of the following illustration (1  2).

6. Fix the Holder-Fix Mount (for wall-mount fixing) to

join the Wall-Mount Bracket with the Soundbar.

c Wall-Mount Screws are not provided.

c Since different types of wall-mount screws are

required depending on your wall, you should

check your wall before installation and purchase

the appropriate wall-mount screws to use.

· 17 · English

󰟳

Power

Turns the Soundbar on and off.

󰟴

SOURCE

Press to select a source connected to the Soundbar.

󰟵

Mute

Sets the volume temporarily to 0.

Press again to cancel.

󰟶

Volume

Adjusts the volume level of the unit.

󰟵

󰟴

󰟳

󰟹

󰟺

󰟽

󰟼

󰟻

󰟷

󰟶

󰟸

Inserting Battery before using the Remote Control

1. Use a suitable coin to turn the remote control's battery cover

counterclockwise to remove it as shown in the figure below.

2. Insert a 3V lithium battery. Keep the positive (+) pole facing up when

inserting the battery. Put the battery cover on, and then align the '●'

marks side by side as shown in the figure below.

3. Use a suitable coin to turn the remote control battery cover clockwise

as far as it will go to fix it in place.

 

REMOTE CONTROL BUTTONS & FEATURES

· 18 · English

󰟷

Play / Pause

Press the

button to pause a music temporarily.

Press the

button again to play the selected music.

Skip Forward

Selects the next file.

Skip Back

Selects the previous file.

Repeat

The Repeat function is available only when playing back music from Songs on

phone or DMS of Samsung Multiroom app.

• OFF-REPEAT : Cancels Repeat Playback.

• TRACK-REPEAT : Plays a track repeatedly.

• ALL-REPEAT : Plays all tracks repeatedly.

󰟸

Surround Sound

The Surround Sound function adds depth and a sense of space to sound.

When this button is pressed, ON or OFF is repeatedly alternated.

󰟹

SOUND

CONTROL

You can select from TREBLE, BASS or AUDIO SYNC.

• To control the volume of the treble or bass sound, select TREBLE or BASS in

Sound Settings, and then adjust the volume between -3~+3 by using the

, buttons.

• If the video and audio between the TV and your Soundbar are not synchronized,

select AUDIO SYNC in Sound Settings, and then set audio delay between 0~300

milliseconds by using the

, buttons.

󰟺

SOUND EFFECT

You can select from 6 sound modes: STANDARD, MUSIC, CLEAR VOICE, SPORTS,

MOVIE, and NIGHT.

c NIGHT Mode

When changing a channel or music source, the volume difference between different

music input sources is automatically adjusted to be suitable for listening.

󰟻

Anynet+

You can turn the Anynet+ and Auto Power Link on or off.

The Anynet+ and Auto Power Link work in reverse to each other.

• Anynet+: if connected through HDMI cable, you can control your Soundbar with

the Samsung TV remote control.

• Auto Power Link: the Soundbar is automatically turned on when turning on the

TV connected through optical input.

󰟼

WOOFER

You can adjust the subwoofer volume between -12, or -6~+6 levels.

󰟽

STREAMING

MUSIC

You can enjoy internet radio through Streaming Music.

You can select your desired station from 3 internet radio stations by default.

To use Streaming Music function, you should connect your Soundbar to a network.

· 19 · English

TROUBLESHOOTING

Before seeking assistance, check the following.

The unit will not turn on.

Is the power cord plugged into the outlet?

 Connect the power plug to the outlet.

A function does not work when the button is

essed.

Is ther

e static electricity in the air?

 Disconnect the power plug and connect it again.

Sound is not produced.

Is the Mute function on?



Press the (Mute) button to cancel the function.

Is the volume set to minimum?

 Adjust the Volume.

The r

emote control does not work.

Is the battery drained?

 Replace with new battery

Is the distance between the remote control and

Soundbar main unit too far?

 Move the remote control closer to the Soundbar

main unit.

The TV SoundConnect (TV pairing) failed.

Does your TV support TV SoundConnect?

 TV SoundConnect is supported by some

Samsung TVs released fr

om 2012 on. Check

your TV to see if it supports TV SoundConnect.

Is your TV firmware the latest version?

 Update your TV with the latest firmware.

Does an err

or occur when connecting?

 Contact the Samsung Call Centre.

 Reset TV SoundConnect and connect again.

o reset the TV SoundConnect connection,

press and hold the

button for 5 seconds.

The red LED on the subwoofer blinks and the

subwoofer is not producing sound.

Your subwoofer may not be connected to the

Soundbar main unit.

 Try to connect your subwoofer again.

See page 5.

The subwoofer dr

ones and vibrates noticeably.

Try to adjust the vibration of your subwoofer



Press the WOOFER button on your remote

control to adjust its value (between -12, -6 ~ +6).

LICENCE

Manufactured under license from Dolby

Laboratories. Dolby, Dolby Audio and the double-D

symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com.

Manufactured under licence from DTS Licencing

Limited. DTS, the Symbol, & DTS and the Symbol

together are registered trademarks, and DTS 2.0

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI

Licencing LLC in the United States and other

countries.

· 20 · English

OPEN SOURCE LICENCE NOTICE

For further information on Open Sources used in this product, please visit the website:

http://opensource.samsung.com

IMPORTANT NOTE ABOUT SERVICE

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product

appearance.

SPECIFICATIONS

GENERAL

Weight

Soundbar Main Unit

4.0 kg

Subwoofer

(PS-WJ7500R / PS-WJ7501R)

6.8 kg

Dimensions

(W x H x D)

Soundbar Main Unit

1230.0 x 47.5 x 170.0 mm

Subwoofer

(PS-WJ7500R / PS-WJ7501R)

452.0 x 335.0 x 154.0 mm

Operating Temperature Range

+5°C to +35°C

Operating Humidity Range

10 % to 75 %

AMPLIFIER

Rated Output

Power

Soundbar Main Unit

20W x 8, 8 ohm, THD≦10%

Subwoofer

(PS-WJ7500R / PS-WJ7501R)

160W, 3 ohm, THD≦10%

• Nominal specification

Design, specifications and App screen are subject to change without prior notice.

Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

Weight and dimensions are approximate.

For more information about the power supply and power consumption, refer to the label attached to the

product. (Label : Bottom of Soundbar main unit)

La pagina sta caricando ...

Samsung HW-J7501R Guida Rapida

Marca: Samsung

Modello: HW-J7501R

Categoria: Altoparlanti della soundbar

Tipo: Guida Rapida

Scarica il pdf

rapporto

in altre lingue

English: Samsung HW-J7501R Quick start guide

Samsung HW-J7501R Guida Rapida

Samsung HW-J7501R Guida Rapida

in altre lingue

Documenti correlati

Altri documenti