Samsung VCMA16BS Manuale del proprietario

Vacuum Cleaner

user manual

imagine the possibilities

Thank you for purchasing a Samsung product.

To receive a more complete service,

please register your product at

www.samsung.com/register

✻

Before operating this unit, please read the instructions carefully.

✻

For indoor use only.

English

VCMA16 series

VCMA18 series

VCMA20 series

02_ safety information

safety information

SAFETY INFORMATION

• Before operating the appliance, please read this manual thoroughly and

retain it for your reference.

• Because these following operating instructions cover various models,

the characteristics of your vacuum cleaner may differ slightly from those

described in this manual.

CAUTION/WARNING SYMBOLS USED

WARNING

Indicates that a danger of death or serious injury exists.

CAUTION

Indicates that a risk of personal injury or material damage exists.

OTHER SYMBOLS USED

Represents something you must NOT do.

Represents something you must follow.

Indicates that you must disconnect the power plug from the socket.

WARNING

safety information _03

safety information

IMPORTANT SAFEGUARDS

1. Read all instructions carefully. Before switching on, make sure

that the voltage of your electricity supply is the same as that

indicated on the rating plate on the bottom of the cleaner.

2. WARNING: Do not use the vacuum cleaner when rug or ﬂ oor

is wet. Do not use to suck up water.

3. Close supervision is necessary when any appliance is used

by or near children. Do not allow the vacuum cleaner to

be used as a toy. Do not allow the vacuum cleaner to run

unattended at any time. Use the vacuum cleaner only for its

intended use as described in these instructions.

4. Do not use the vacuum cleaner without a dust bin.

Empty the dust bin before it is full in order to maintain the

best efﬁ ciency.

5. Slide to the Stop(or Min) position before inserting a plug into

the electrical outlet.

6. Do not use the vacuum cleaner to pick up matches, live

ashes or cigarette butts.

Keep the vacuum cleaner away from stoves and other heat

sources. Heat can deform and discolour the plastic parts of

the unit.

7. Avoid picking up hard, sharp objects with the vacuum cleaner

as they may damage the cleaner parts. Do not stand on the

hose assembly. Do not put weight on the hose.

Do not block the suction or the exhaust port.

04_ safety information

8. Switch the vacuum cleaner off on the body of the machine

before unplugging from the electrical outlet. Disconnect the

plug from the electrical outlet before changing the dust bag

or dust container. To avoid damage, please remove the plug

by grasping the plug itself, not by pulling on the cord.

9. This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved.

10. Children shall not play with the appliance.

11. Cleaning and user maintenance shall not be made by children

without supervision.

12. The use of an extension cord is not recommended.

13. If your vacuum cleaner is not operating correctly, switch off

the power supply and consult an authorized service agent.

14. If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualiﬁ ed

person in order to avoid a hazard.

15. Don’t carry the vacuum cleaner by holding the hose. Use the

handle on the vacuum cleaner set.

16. Unplug the cleaner when not in use. Turn off the power

switch before unplugging.

safety information

contents _05

contents

ASSEMBLING THE CLEANER

06

OPERATING THE CLEANER

07

07 ON/OFF Switch

07 Power Cord

08 Power-Control

MAINTAIN TOOLS AND FILTER

09

09 Using accessory

10 Maintain ﬂ oor tools

12 Emptying the dust bin

13 When to clean the dust pack

14 Cleaning the dust pack

15 Cleaning the outlet ﬁ lter

TROUBLESHOOTING

16

06_ assembling the cleaner

assembling the cleaner

• Please do not press the button

of dust bin handle when carrying

machine.

• For storage, park the ﬂ oor nozzle.

OPTION

operating the cleaner _07

02 OPERATING THE CLEANER

operating the cleaner

ON/OFF SWITCH

1) BODY CONTROL TYPE 2) ON/OFF TYPE

• When removing the plug from the electrical outlet, grasp

the plug, not the cord.

POWER CORD

CAUTION

08_ operating the cleaner

POWER-CONTROL

BODY-CONTROL TYPE / ON/OFF TYPE

• HOSE

To reduce suction for cleaning draperies,

small rugs, and other light fabrics, pull

the tap air until the hole is open.

• BODY (BODY-CONTROL TYPE ONLY)

MIN = For delicate surface e.g. net

curtains.

MAX = For hard ﬂ oors and heavily soiled

carpets.

maintain tools and ﬁ lter _09

03 MAINTAIN TOOLS AND FILTER

maintain tools and ﬁ lter

USING ACCESSORY

Pipe (Option)

• Adjust the length of the telescopic pipe by

sliding the length control button located in the

center of the telescopic pipe back and forth.

• To check for blockages, separate the

telescopic pipe and adjust to shorten. This

allows for easier removal of waste clogging the

tube.

Accessory

• Dusting brush for furniture. shelves, books,

etc.

• Crevice tool for radiators, crevices, corners,

between cushions.

10_ maintain tools and ﬁ lter

Blanket brush (Option)

Clogs on turbine keep brush from turning, thus need to be unclogged

as follows. For picking up pet hair and ﬁ bre on upholstery and bed

linen.

Remove waste matter completely when inlet is blocked.

Turn the lock button to ‘UNLOCK’, and remove waste

matter.

To reassemble, align the cover to the front of the main

body and close. After closing the cover, ensure that the

lock button is turned to the ‘LOCK’ position.

Use for bedclothes only. Be cautious not to damage brush during

unclogging.

MAINTAIN FLOOR TOOLS

2-Step Brush

• Adjust the inlet lever according to the ﬂ oor

surface.

• Remove waste matter

completely if the inlet is

blocked.

Carpet Cleaning

Floor Cleaning

Turbine

Brush

WARNING

maintain tools and ﬁ lter _11

03 MAINTAIN TOOLS AND FILTER

maintain tools and ﬁ lter

Mini turbo brush (Optional)

- TO REPLACE BRUSHROLL

1. If a clog is present or debris is visible, unscrew the

two screws on the back of the Mini turbo brush to

remove the faceplate and clear any obstructions.

2. Inspect condition of brushroll.

Replace brushroll if brushes are worn down.

To remove brushroll, pull up and out of end slots in

nozzle housing.

Insert ends of brushroll into same slots to replace.

Inspect belt to ensure that it is in good

condition.

If belt is broken or cracked, replace belt

according to To Replace Belt instructions.

3. Using at MAX.

Press the MAX button to operate the vacuum at

maximum intake.

- TO REPLACE BELT

1. Remove bottom plate.

See ﬁ gure in To Replace Brushroll instructions.

2. Loop one end of new belt around shaft of pulley.

3. Loop other end of belt around designated area for

it on brushroll. Insert brushroll into slots in nozzle

housing.

See ﬁ gure in To Replace Brushroll instructions.

4. Fit Mini turbo brush back together as described in

To Replace Brushroll instructions.

12_ maintain tools and ﬁ lter

EMPTYING THE DUST BIN

1. Once dust reaches the

MAX mark, or sution

is noticeably reduced

during cleaning, empty

the dust bin.

2. Take the dust bin out

by pressing the button.

3. Separate the dust bin

cover.

4. Throw away dust into

the bin.

5. Close the dust bin

cover.

6. Before use, push the

dust bin into the main

body of the vacuum

cleaner until you hear

the “click” sound.

- Empty into a plastic bag

(recommended for asthma/

allergy sufferers)

You may rinse the dust bin with cold water.

click

maintain tools and ﬁ lter _13

03 MAINTAIN TOOLS AND FILTER

maintain tools and ﬁ lter

WHEN TO CLEAN THE DUST PACK

- If suction is noticeably reduced during cleaning, please check the dust pack as

indicated below.

Turn the vacuum power to ‘MAX’.

If suction is noticeably reduced with the inlet ﬂ oating 10cm

above ﬂ at ﬂ oor, clean it.

When suction is noticeably reduced continuously, please cleaning the Dust Pack as

shown in the following illustration.

14_ maintain tools and ﬁ lter

CLEANING THE DUST PACK

1. Remove the dust bin and dust pack as

shown.

2. Remove the sponge and ﬁ lter from the dust pack.

3. Wash the sponge and the ﬁ lter of the dust pack

with water.

4. Let the sponge and ﬁ lter dry in the shade for more

than 12 hours.

5. Put the sponge and ﬁ lter into the dust pack.

6. Put the assembled dust pack into the main

body.

Make sure the ﬁ lter is completely dry

before putting it back into the vacuum

cleaner. Allow 12 hours for it to dry.

maintain tools and ﬁ lter _15

03 MAINTAIN TOOLS AND FILTER

maintain tools and ﬁ lter

CLEANING THE OUTLET FILTER

Press the ﬁ xed frame part at the back

of the main body to remove.

Remove and replace the blocked

outlet ﬁ lter.

Replacement ﬁ lters are available at your local Samsung distributor.

16_ troubleshooting

troubleshooting

PROBLEM SOLUTION

Motor dows not start.

• Check cable, pulg and socket.

• Leave to cool.

Suction force is gradually

decreasing.

• Check for blockage and remove.

Cord does not rewind fully.

• Pull the cord out 2-3m and push down the cord

rewind button.

Vacuum cleaner dows not pick

up dirt.

• Check hose and replace if required.

Low or decreasing suction

• Please check ﬁ lter and, if required, clean as

illustrated in the instructions. if ﬁ lters are out of

condition change them to new ones.

Body overheating

• Please check ﬁ lters, If required clean as

illustrated in the instruction.

Static electicity discharge • Please decrease power suction.

memo

La pagina si sta caricando...

Samsung VCMA16BS Manuale del proprietario

Questo manuale è adatto anche per

Samsung VCMA16BS Manuale del proprietario

in altre lingue

Documenti correlati

Altri documenti