Sharp LL-T15S1 Manuale utente

Categoria
TV
Tipo
Manuale utente
R
LCD MONITOR
LCD FARBMONITOR
MONITEUR LCD
MONITOR LCD
MONITOR LCD
LL-T15S1
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE D’USO
MANUAL DE FUNCIONAMIENTO
- This operation manual is made using recycled paper.
- Diese Bedienungsanleitung ist auf Recycling-Papier gedruckt.
- Ce mode d’emploi a été imprimé sur du papier recyclé.
- Questo manuale operativo è prodotto con carta riciclata.
- Este manual de uso está impreso en papel reciclado.
Table of Contents / Inhaltsverzeichnis / Table des matières / Indice / Índice
English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
2
3
English
Table of Contents
Notice for Users in the USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TCO'99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notice for Users in Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Notice for Users in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Notice for Users in Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting the monitor to a computer (PC etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting the monitor to headphones and a microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Connecting the monitor to a power source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Turning the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Adjusting the screen display and speaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Automatic screen adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting the backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Manual screen adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Adjusting the speaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Monitor care and repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Monitor care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Instructions for installing a VESA compliant arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4
Notice for Users in the USA
FCC Statement
WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user's authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B
computing equipment.
Declaration of Conformity
SHARP LCD Color Monitor LL-T15S1
This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undersized operation.
Responsible Party : SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430
TEL :1-800-BE-SHARP
* As an ENERGY STAR Partner, SHARP has determined that this product meets the ENERGY STAR
guidelines for energy efficiency.
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal
of these materials may be regulated due to environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronics Industries Alliance:www.eiae.org
5
English
Congratulations!
You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a
product developed for professional use. Your purchase has also contributed to reducing the burden on the
environment and also to the further development of environmentally adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established method for encouraging the
adaptation of goods and services to the environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful substances are used both in the
products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances sooner or later enter nature.
There are also other characteristics of a computer, such as energy consumption levels, that are important
from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing
emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running
continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO'99 scheme which provides for international and
environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The
Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy
Administration).
Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric
and magnetic fields, energy consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and use of heavy metals, brominated and
chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must
be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be
adhered to in each country where the company implements its operational policy.
The energy requirements include a demand that the computer and/or display, after a certain period of
inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to
reactivate the computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for example, in respect of the reduction of
electric and magnetic fields, physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
6
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email (Internet): dev[email protected]
Current information regarding TCO'99 approved and labelled products may also be
obtained via the Internet, using the address: http://www.tco-info.com/
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is
to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of
flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants
are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing
bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including
reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame
retardants have been found in human blood and researchers fear that disturbances in foetus development
may occur.
The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not
contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the
printed circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer
displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99
requirement states that batteries, the colour-generating layers of display screens and the electrical or
electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in
high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also
demands that mercury is not present in any of the electrical or electronics components associated with the
labelled unit. There is however one exception. Mercury is, for the time being, permitted in the back light
system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing
this exception when a mercury free alternative is available.
CFCs (freons)
The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture
and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs
break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on
earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous
system and in higher doses, causes lead poisoning. The relevant TCO´99 requirement permits the inclusion
of lead since no replacement has yet been developed.
*
Bio-accumulative is defined as substances which accumulate within living organisms
**
Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
7
English
Notice for Users in Europe
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by
93/68/EEC.
Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit
Änderung 93/68/EWG.
Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées
par la directive 93/68/CEE.
Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/
EEG.
Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.
Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla
direttiva 93/68/EEC.
Η εγκατασταση ανταποκρινεται στιζ απαιτησειζ των οδηγιων τηζ Ευρωπαïκηζ Ενωσηζ 89/336/ΕΟΚ κατ 73/23/ΕΟΚ,
óπωζ οι κανονισµοι αυτοι συµπληρωθηκαν απó την οδηγια 93/68/ΕΟΚ.
Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão
corrigida pela directiva 93/68/CEE.
Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio
de la 93/68/CEE.
Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som komplette ras av
93/68/EEC.
Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.
Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/
EEC.
CAUTION :
TO PREVENT ELECTRICAL SHOCK, DISCONNECT THE AC CORD BEFORE SERVICING.
CAUTION :
FOR A COMPLETE ELECTRICAL DISCONNECTION, PULL OUT THE MAIN PLUG.
VORSICHT :
UM DIE STROMZUFUHR VOLLSTÄNDIG ZU UNTERBRECHEN, DEN NETZSTECKER HERAUSZIEHEN
ENTFERNEN.
ATTENTION :
POUR UN ARRET TOTAL DU SYSTEMS, DECONNECTEZ LA PRISE DE COURANT SECTEUR.
VARNING :
FÖR TOTAL ELEKTRISK URKOPPLING, KOPPLA UR KONTAKTEN OCH.
PRECAUCION :
PARA UNA COMPLETA DESCONEXION ELECTRICA DESENCHUFE LA CLAVIJA DE LA RED.
8
Notice for Users in the UK
FOR CUSTOMERS IN U.K.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code :
GREEN-AND-YELLOW : Earth
BLUE : Neutral
BROWN : Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured
markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN-
AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the
safety earth or coloured green or green-and-yellow.
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N
or coloured black.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter
L or coloured red.
Ensure that your equipment is connected correctly-if you are in any doubt consult a qualified
electrician.
"WARNING :THIS APPARATUS MUST BE EARTHED"
Notice for Users in Australia
Service Inquiries
Please contact your dealer for service if required or contact Sharp Corporation of Australia on
1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.
9
English
- Under certain display conditions, minute specks or
spots may be noticeable. This is common for liquid
crystal monitors and is not a malfunction.
- The LCD panel has been manufactured using highly
elaborate technology. Properly working pixels com-
prise 99.99% of total pixels. However, please
understand that 0.01% or less of pixels may be
missing or be brighter than usual.
- Do not leave the screen displaying idly for long peri-
ods of time, as this could cause afterimage to remain.
- If the brightness is adjusted to the minimum setting it
may be difficult to see the screen.
- The quality of the computer signal may influence the
quality of the display. We recommend using a
computer able to emit high quality video signals.
- Never rub or tap the monitor with hard objects.
- Please understand that Sharp Corporation bears no
responsibility for errors made during use by the
customer or a third party, nor for any other malfunc-
tions or damage to this product arising during use,
except where indemnity liability is recognized under
law.
- This monitor and its accessories may be upgraded
without advance notice.
Location
- Do not use the monitor where ventilation is poor,
where there is a lot of dust, where humidity is high, or
where the monitor may come into contact with oil or
steam, as this could lead to fire.
- Ensure that the monitor does not come into contact
with water or other fluids. Ensure that no objects such
as paper clips or pins enter the monitor as this could
lead to fire or electric shock.
- Do not place the monitor on top of unstable objects
or in unsafe places. Do not allow the monitor to come
into contact with strong shocks or vibrations. Causing
the monitor to fall or topple over may damage it.
- Do not use in places where the monitor will be
subject to direct sunlight, near heating equipment or
anywhere else where there is likelihood of high
temperature, as this may lead to generation of
excessive heat and outbreak of fire.
The Power Cord
- Do not damage the power cord or place heavy
objects on it, stretch it or overly bend it. Also, do not
add extension cords. Damage to the cord may result
in fire or electric shock.
- Use only the AC adapter supplied with the monitor.
Using an AC adapter other than that supplied may
lead to fire.
- Insert the power plug directly into the AC outlet.
Adding an extension cord may lead to fire as a result
of overheating.
Monitor and accessory checklist
- Please check that the following items are included in
the package.
- LCD monitor (1)
- AC adapter (1)
- Audio cable (2)
- Utility Disk for Windows (1)
- Operation manual (1)
Notes:
- You are advised to retain the carton in case the
monitor needs to be transported.
- Authorship rights to the Monitor Settings Adjustment
Disk program are held by Sharp Corporation. Do not
reproduce it without permission.
Use of AC adapter
- Do not use the AC adapter for other than the
specified equipment.
- Unplug the AC adapter if it is not used for long time.
- Do not place any objects on the AC adapter.
- Do not use the AC adapter outdoors.
- Do not attempt to repair the AC adapter if it is broken
or malfunctioning. Refer the servicing to the service
representative.
- Do not try to open the AC adapter.
- Do not use water or wet cloth to cleaning of the AC
adapter.
Manual Scope
- In this booklet, Microsoft Windows 2000 will be
referred to as [Windows2000], Microsoft Windows
Millenium as [WindowsMe], Microsoft Windows 98 as
[Windows98], Microsoft Windows 95 as [Windows95],
and Microsoft Windows Version 3.1 as [Windows3.1].
When there is no need to distinguish between
programs, the term [Windows] will be used.
- Microsoft and Windows are registered trademarks of
Microsoft Corp. U.S. in the U.S. and the other
countries.
- Macintosh is a registered trademarks of Apple
Computer, INC.
Tips and safety precautions
10
Product description
1
7
8
9
10
11 12 13
14
15
2
3
456
1. MENU button ..........................This button is used to pop-up, select and close the OSD Menu.
2. SELECT button.......................When the On Screen Display (OSD) menu is displayed, choose the menu option to
be adjusted.
3.
buttons ............................When the OSD menu is displayed:
Change or adjust the adjustment values by switching between the OSD options
contents.
When the backlight adjustment bar is displayed:
The brightness of the backlight can be adjusted.
When the OSD menu / backlight adjustment bar is not displayed:
The speaker volume can be adjusted.
4. BRIGHT button .......................When the OSD menu is displayed:
The OSD menu disappears.
When the OSD menu is not displayed:
Switch between turning the automatic brightness adjustment function [ON] and
[OFF].
5. Power LED.............................. This LED is lit green when in use and orange when in power-saving mode.
6. Power button...........................Pressing this button turns the power on. (After turning the power on, it may take a
little time before the screen displays.)
Press the button again to turn the power off.
7. Speakers ................................Audio entering via the monitor and the external device connected to the monitor
can be heard.
8. Brightness sensor ..................Measures the brightness of the surrounding environment.
9. Microphone terminal ..............A microphone (to be purchased separately) can be connected here.
10. Headphone terminal .............. Headphones (to be purchased separately) can be connected here.
11. Audio input terminal ...............A computer’s audio output terminal can be connected here. (The audio cable
included should be used.)
12. Microphone output terminal ...A computer’s microphone terminal can be connected here. (The audio cable
included should be used.)
13. Power terminal........................Connect the AC adapter (included) here.
14. RGB signal cable ...................Connects to the computer's analog RGB output terminal.
15. Ventilation openings ..............Note: Never block the ventilation openings as this may lead to overheating inside
the monitor and result in malfunction.
Front view Rear viewLeft side surface
11
English
Product description
Standing up and adjusting the monitor
Standing up the monitor
Press down on the stand and lift up the top section of the
monitor.
Adjusting the monitor
Lightly holding both sides of the monitor, adjust it to a
suitable viewing angle.
25
3
Folding up the monitor (when packing it away)
- Except when folding away the monitor to transport it,
do not fold down the monitor. Unnecessarily folding
and unfolding the monitor could lead to malfunction.
1. Remove the AC adapter.
2. If carrying out adjustments to the monitor, place it
upright.
3. While pressing the rear lock disable button (1),
gently fold back the monitor (2).
(2)
(1)
12
Connecting the monitor and turning
the monitor on and off
Connecting the monitor to a computer
(PC etc.)
When connecting, ensure that both the monitor and
computer are switched off.
Note:
- Do not overly bend the cable or add extension cords
as this could lead to malfunction.
Using the audio cable included, the computers audio
output terminal or a microphone terminal can be con-
nected.
Note:
- DO only connect cables less than 3m to the LL-
T15S1.
RGB cable
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh
conversion adapter (to be purchased
separately) to the RGB signal cable.
Macintosh conversion adapter
RGB signal cable
After connecting the adapter, tighten the
screws on each side to fix into place.
Firmly insert the analog RGB output
terminal (mini D-sub 15 pin with 3 rows)
then tighten the screws each side.
Connecting the monitor to headphones
and a microphone
Headphones and a microphone (both to be purchase
separately) can be connected here.
Note:
- Do not overly bend the cable or add extension cords
as this could lead to malfunction.
Note:
- DO only connect cables less than 3m to the LL-
T15S1.
- When the headphones are connected, no sound can
be heard from the monitor speakers.
Connecting the monitor to a power source
Before connecting, first turn off the monitor's main
power switch.
Note:
- Do not overly bend the cable or add extension cords
as this could lead to malfunction.
1. Connect the AC adapter to the monitor's power
terminal
2. Attach the power cord to the AC adapter and place
the power plug into the AC terminal.
Audio cable
Audio input
terminal
Microphone output
terminal
PC (Audio output
terminal)
PC (Microphone
terminal)
Microphone
terminal
Headphone
terminal
Microphone
Headphones
Power terminal
AC adapter
Power cord
13
English
Connecting the monitor and turning the monitor on and off
Turning the power on
1. Turn on the computer.
2. Press the monitor's power button.
The power LED will be lit green, and the screen will
display an image.
Note:
- When setting up this monitor for the first time or after
having changed an aspect of the current system,
perform an automatic screen adjustment before use
(p. 15).
Turning the power off
1. Turn the computer off.
2. Press the monitor's power button.
The Power LED will disappear.
Installing set-up information
Depending on the computer or OS, it may be necessary
to use the computer to operate the installation of monitor
set-up information etc. If so, follow the steps below to
install the monitor set-up information. (Depending on the
type of computer or OS, command names and methods
may differ. Please follow the computers own operation
manual while reading this.)
For Windows95
Installing monitor set-up information into Windows95.
This explanation assumes that the floppy disk drive is "A
drive".
1. Place the Utility Disk (provided) into the computer's A
drive.
2. Click on the [Start] button. From [Settings], choose
[Control Panel].
3. Double click on [Display].
4. Click on [Settings], [Advanced Properties], and
[Monitor], then [Change].
5. Click on [Have disk], confirm that [Copy manufactur-
er's files from:] is [A:] then click [OK].
6. Confirm that the monitor details are selected, and
click [OK].
7. Check that the monitor details are displayed, then
click [Apply].
8. Click [OK], and close the window.
9. Remove the Utility Disk from the A drive.
For Windows98
Installing monitor set-up information into Windows98.
This explanation assumes that the floppy disk drive is "A
drive".
If the "Add new Hardware Wizard" has appeared:
1. Place the Utility Disk (provided) into the computer's A
drive.
2. Click [Next].
3. Check [Display a list of all the drivers in a specific
location, so you can select the driver you want.], then
click [Next].
4. When [Models] is displayed, click on [Have disk],
confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].
5. Confirm that the monitor details are selected, then
click [Next], [Next], and [Finish]. If the "Add New
Hardware Wizard" appears, repeat the installation
commands beginning from 2 above.
6. Remove the Utility Disk from the A drive.
If the "Add New Hardware Wizard" has not appeared:
1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. From [Settings], choose
[Control Panel].
3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug & Play
monitors] and click on [Change].
6. Click [Next].
7. Click on [Display a list of all the drivers in a specific
location, so you can select the driver you want.], then
click [Next].
8. When [Models] is displayed, click on [Have disk],
confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].
9. Confirm that the monitor details are selected, then
click [Next], [Next], and [Finish].
10. Check that the monitor details are displayed, then
click [Apply].
11. Click [OK], and close the window.
12. Remove the Utility Disk from the A drive.
Power LED Power button
14
Connecting the monitor and turning the monitor on and off
For Windows2000
Installing monitor set-up information into Windows2000.
This explanation assumes that the floppy disk drive is "A
drive".
1. Place the Utility Disk (provided) into the computer's A
drive.
2. Click on the [Start] button. From [Settings], choose
[Control Panel].
3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. Click on [Properties], [Driver] and [Update Driver].
6. When [Upgrade Device Driver Wizard] appears, click
[Next].
7. Check [Display a list of the known drivers for this
device so that I can choose a specific driver] and
click [Next].
8. When [Models] is displayed, click on [Have disk],
confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].
9. Select the monitor from the list displayed and click
[Next].
10. Click [Next], confirm that the monitor's name appears
on the screen, and click [Finish]. If [The Digital
Signature Not Found] appears, click [Yes].
11. Click on [Close].
12. Click [OK], and close the window.
13. Remove the Utility Disk from the A drive.
For WindowsMe
Installing monitor set-up information into WindowsMe.
This explanation assumes that the floppy disk drive is "A
drive".
If the "Add new Hardware Wizard" has appeared:
1. Place the Utility Disk (provided) into the computer's A
drive.
2. Check [Specify the location of the driver [Advanced]]
and click [Next].
3. Check [Display a list of all the drivers in a specific
location, so you can select the driver you want.], then
click [Next].
4. When [Models] is displayed, click on [Have disk],
confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].
5. Select the monitor details from the list, then click
[Next], [Next], and [Finish]. If the "Add new Hardware
Wizard" appears, repeat the installation commands
beginning from 2 above.
6. Remove the Utility Disk from the A drive.
If the "Add New Hardware Wizard" has not appeared:
1. Place the Utility Disk in the computer's A drive.
2. Click on the [Start] button. From [Settings], choose
[Control Panel].
3. Double click on [Display].
4. Click on [Settings], [Advanced] and [Monitor].
5. In [Options], check [Automatically detect Plug & Play
monitors] and click on [Change].
6. Check [Specify the location of the driver [Advanced]]
and click [Next].
7. Check [Display a list of all the drivers in a specific
location, so you can select the driver you want.] and
click [Next].
8. When [Models] is displayed, click on [Have disk],
confirm that [Copy manufacturer's files from:] is [A:],
and click [OK].
9. Select the monitor details, then click [Next], [Next],
and [Finish].
10. Check that the monitor details are displayed, then
click [Apply].
11. Click [OK], and close the window.
12. Remove the Utility Disk from the A drive.
15
English
Adjusting the screen display and speaker volume
Adjusting the screen dispray
Automatic screen adjustment (right column)
The clock, phase, H-POS (horizontal positioning) and V-
POS (vertical positioning) functions can be adjusted
automatically.
Adjustment of backlight (p.16)
Brightness of backlight can be adjusted.
Manual adjustment (p. 17)
Fine adjustments can be made using the On Screen
Display (OSD) Menu.
Note:
- All adjustments will be saved even after turning the
power off.
All Reset MENU
All adjustment values can be returned to their original
ex-factory values in one command.
1. Press the power button to turn off the monitor power.
2. Press the MENU button and the SELECT button
simultaneously, and while doing this press the power
button (i.e. turn the power on). When [ALL RESET]
appears on the screen, the reset is complete.
Notes:
- While ALL RESET is displayed, the control buttons
do not function.
- It is not possible to reset values when the adjustment
lock is in place. Remove the adjustment lock before
attempting to operate control buttons.
Adjustment lock function
By disabling the control buttons (i.e. setting the lock) any
attempted changes to adjusted values will be voided.
1. Press the power button to turn off the monitor power.
2. While pressing the MENU button, press the power
button (i.e. turn the power on).
When the menu is unlocked:
[ADJUSTMENT LOCKED] will appear on the screen,
and the lock will be set.
When the menu is locked:
[ADJUSTMENT UNLOCKED] will appear on the
screen, and the lock will be removed.
Note:
- When the lock setting is on, only the power button
and the speaker volume adjustment can be
operated.
Choosing a message language
Messages displayed on the screen and OSD Menu
contents can be changed to the following languages.
English, German, French, Italian, Spanish.
1. Turn off the monitor.
2. Pressing the SELECT and
buttons simultaneously,
press the power button (i.e. turn the power on).
The Language Selection Menu (LANGUAGE) will be
displayed on the screen.
3. Use the SELECT button to choose a language.
4. Press the MENU button.
The setting is complete. From now, messages and
adjustment menus will be displayed in the chosen
language.
Automatic screen adjustment
Options in MENU 1 (ADJUSTMENT) can be adjusted
automatically (CLOCK, PHASE, H-POS,
V-POS).
Note:
- When setting up this monitor for the first time or after
having changed an aspect of the current system,
perform an automatic screen adjustment before use.
1. First display an image that makes the entire screen
very bright. If you are using Windows, you can use
the Adjustment Pattern on the accompanying Utility
Disk (p.16).
2. Press the MENU button.
The ADJUSTMENT Menu will be displayed.
[
]
A
AA
A
A
CC
D
E
HV
H
H
J
K
LM
M
N
N
L
O
O
O
P
P
S
S
S
T
TT
U
U
U
8
V
12
4
6
4
H
67
0
8
0
5
60
1
0
0 5
z
0x
-
OPS-
:k:4Hz
E
3. Press the button.
The screen will become dark and [ADJUSTING] will
be displayed. After a few seconds the ADJUSTMENT
Menu will return. (The automatic adjustment is now
complete.)
4. Press the MENU button 4 times to make the On
Screen Display (OSD) Menu disappear.
Notes:
- In most cases automatic adjustment is sufficient.
- If necessary due to any of the following, manual
adjustments (p. 17) can be performed after the
automatic adjustment.
- When further fine adjustment is needed.
- When [OUT OF ADJUST] is displayed. (When the
screen displays an entirely dark image, the
automatic screen adjustment may be disabled.
When making an automatic adjustment, be sure
to either use the Adjustment Pattern or try
displaying an image that makes the entire
screen very bright.)
16
Opening the Adjustment Pattern (for Windows)
If you are using Windows, you can use the Adjustment
Pattern on the accompanying Utility Disk.
This explanation is for Windows 95/98/Me/2000, and
assumes that the floppy disk drive is "A drive".
1. Place the Utility Disk (provided) into the computer's A
drive.
2. Open [My Computer] and select [3 ½ Floppy (A:)]. If
using Windows 3.1, open [File Manager] and choose
"A drive".
3. Double click on [Adj_uty.exe] to run the Adjustment
Program. The Adjustment Pattern will appear.
Notes:
- After completing the adjustments, press the
computer's [Esc] key to exit the Adjustment Program.
- If the floppy disk drive of your computer is not
"A drive", please read the below substituting the
floppy disk drive you are using in place of
"A drive" or "A".
- If your computer's display mode is set to 65K colors,
you may see the different color levels in each color
pattern or the gray scale may look colored. (This is
due to the specification of the input signal and is not
a malfunction.)
Adjusting the backlight
The backlight brightness can be set to change automati-
cally for use in different surroundings. (Automatic
brightness adjustment)
If the surroundings become brighter, the backlight will
become brighter.
If the surroundings become darker, the backlight will
become darker.
The brightness sensor measures the brightness of the
surrounding environment. Never place anything in front
of the brightness sensor.
Use the BRIGHT button to switch between automatic
brightness adjustment or no automatic brightness
adjustment.
Automatic brightness adjustment
AUTO BRIGHTNESS ON
[ ]
[ ]
!" Press BRIGHT button
No automatic brightness adjustment
B R I G H T
AUTO BRIGHTNESS OFF
]
[
[ ]
3 1
Notes:
- The backlight adjustment bar automatically
disappears several seconds after the last command.
- On the screen that appears after the values have
been set, the brightness can be further adjusted by
pressing the
and buttons.
Adjusting the brightness
Carry out the commands without the On Screen Display
(OSD) Menu displayed. If the OSD Menu is displayed,
press the MENU button (several times may be required)
and begin when the OSD Menu has disappeared.
When adjusting brightness automatically
Using the adjusted backlight brightness as a base, the
brightness can be adjusted automatically.
1. Without the OSD Menu being displayed, press the
button or the button. The BRIGHT bar will appear at
the bottom section of the screen.
AUTO BRIGHTNESS ON
[ ]
[ ]
2. Adjust by pressing the button (darker) or the
button (lighter).
Depending on the brightness of the surrounding
environment, the parameters for adjustment may be
limited.
3. Press the MENU button.
The OSD will disappear.
Adjusting the screen display and speaker volume
Adjustment pattern
17
English
When not adjusting brightness automatically
1. Without the OSD Menu being displayed, press the
button or the button.
B R I G H T
AUTO BRIGHTNESS OFF
]
[
[ ]
3 1
2. Adjust by pressing the button (darker) or the
button (lighter).
3. Press the MENU button.
The OSD Menu will disappear.
Note:
- The backlight adjustment bar automatically
disappears several seconds after the last command.
Manual screen adjustment
Fine adjustments can be made using On Screen Display
(OSD) Menu provided.
1. Display an image that makes the entire screen very
bright. If using Windows, you can open and use the
Adjustment Pattern on the accompanying Utility Disk.
(p. 16)
2. Press the MENU button.
The ADJUSTMENT Menu will be displayed.
[
]
A
AA
A
A
CC
D
E
HV
H
H
J
K
LM
M
N
N
L
O
O
O
P
P
S
S
S
T
TT
U
U
U
8
V
12
4
6
4
H
67
0
8
0
5
60
1
0
0 5
z
0x
-
OPS-
:k:4Hz
E
At this point relevant menu options can be adjusted.
Each time the MENU button is pressed the next
menu is selected. (MENU 1 2 3 4 OSD
Menu disappears)
Notes:
- The OSD Menu automatically disappears several
seconds after the last command.
- This explanation is based on using the Adjustment
Pattern (for Windows) to make adjustments.
MENU 1: ADJUSTMENT
[
]
A
AA
A
A
CC
D
E
HV
H
H
J
K
LM
M
N
N
L
O
O
O
P
P
S
S
S
T
TT
U
U
U
8
V
12
4
6
4
H
67
0
8
0
5
60
1
0
0 5
z
0x
-
OPS-
:k:4Hz
E
MANUAL: Individual menu options are manually
adjusted.
AUTO: Every menu option is automatically
adjusted.
Notes:
- Press the
button to select AUTO.
- To choose a menu option: SELECT button
- To go to MENU 2: MENU button
CLOCK
The figure below demonstrates how to adjust so that
vertical flicker noise is not emitted. (
buttons)
PHASE
The figure below demonstrates how to adjust so that
horizontal flicker noise is not emitted. (
buttons)
Note:
- Adjustments to PHASE should be made only after
CLOCK has been correctly set.
H-POS (horizontal positioning) and V-POS
(vertical positioning)
To center the screen image within the boundaries of the
screen, adjust the left-right (H-POS) values and the up-
down (V-POS) values. ( buttons)
Adjusting the screen display and speaker volume
Horizontal flicker noise
Vertical flicker noise
Screen frame
Adjustment
pattern
18
MENU 2: GAIN CONTROL
BLACK LEVEL and CONTRAST are optimized before
shipment, but can be adjusted to suit.
[]
AA A
GA I
LM
O
N
T
OT
CROL
U U
N
12
3
4
4678
0
0
620K 16M
0x
N
HV60:Hz 8Hzk:4
BLACK LEVEL
CONTRAST
DISPLAY COLORS
MANUAL: Individual menu options are manually
adjusted.
AUTO: Every menu option is automatically
adjusted using the Auto Gain Control*
function,
Notes:
- Press the
button to select AUTO.
- To choose a menu option: SELECT button
- To go to MENU 3: MENU button
* Auto Gain Control function
- The Auto Gain Control adjusts contrast and black
level based on the brightest color of the image
displayed. If you are not using the Adjustment Pattern
it is necessary to have an area of
5 mm x 5 mm of white displayed, and if not
adjustments may not be possible. (In such case,
[OUT OF ADJUST] will appear and setting values
remain unchanged.)
- To perform the Auto Gain Control function, first go to
MENU 3 and set [WHITE BALANCE] to something
other than [USER]. If [USER] is set, Auto Gain Control
will be disabled.
BLACK LEVEL
Total screen brightness can be adjusted while watching
the color pattern. (
buttons)
CONTRAST
While watching the color pattern, adjustments can be
made so that all graduations appear. ( buttons)
DISPLAY COLORS
Maximum display colors can be set. ( buttons)
260K (260,000) and 16M (16.19 million)
MENU 3: WHITE BALANCE
WHITE BALANCE (color tone) can be adjusted as
necessary. (As adjustments are made before shipment,
there is no real necessity for further alteration.)
D
OR
WH I
C
B
O
L
U ESR
A
NE
C
LM
T
E
A
S
W
AT
[]
124 6780x
HV60:Hz 8Hzk:4
3
4
0
0
20
R-CONTRAST
G-CONTRAST
B-CONTRAST
Notes:
- On settings other than [STD] not all graduations can
be displayed. To display all graduations, set to STD.
- Selecting USER will display the setting values for [R-
CONTRAST], [G-CONTRAST] and
[B-CONTRAST], in order to make fine adjustments.
- To choose a menu option: SELECT button
- To go to MENU 4: MENU button
COOL . . . . . Color tone bluer than standard
- . . . . . . . Color tone slightly bluer than standard
STD. . . . . . . Color tone standard setting
- . . . . . . . Color tone slightly redder than standard
WARM . . . . . Color tone redder than standard
USER
R-CONTRAST . . . button for blue-green
button for red
G-CONTRAST . . .
button for purple
button for green
B-CONTRAST . . .
button for yellow
button for blue
Adjusting the screen display and speaker volume
Color pattern
19
English
Adjusting the screen display and speaker volume
MENU 4: MODE SELECT
0
H-SO
M
O
O
0
D
V-
POD
SD
T
4
IS
SLETCE
NOI
E
OPTIS
LS
NIE
NOI
046027
[]
124 6780x
HV60:Hz 8Hzk:4
ELVSCAL ING
EL
1
ELV
EL
2
Notes:
- Depending on the resolution of the input signal, even
if menu options can be selected, the display may not
change.
- To choose a menu option: SELECT button
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the left
and right. (
buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up and
down. ( buttons)
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-line
screen when using US text, etc.
(
buttons)
640 640 X 400 dot mode
720 720 X 400 dot mode (US text etc.)
Note:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
SCALING (Level of scaling)
The sharpness of the image can be adjusted.
( buttons)
Note:
- When the display mode is set to less than
1024 x 768 pixels, the display is enlarged to cover
the whole screen (i.e. the side ratio of the display
may change).
- Display modes of 1024 X 768 pixels cannot be
changed.
Adjusting the speaker volume
Without the OSD menu and backlight adjustment bar
being displayed, press the
buttons to adjust the
volume.
20
Monitor care and repair
Monitor care
Always remove the plug from the AC outlet when
cleaning the monitor.
Cabinet and control panel section
Use a soft dry cloth to lightly wipe away any grime from
the cabinet and control panel.
If very dirty, apply neutral detergent to a dampened soft
cloth, wring it out well and wipe away grime.
LCD panel section
Use a soft dry cloth to lightly wipe away dirt and dust
from the surface of the LCD panel. (A soft cloth such as
gauze or that used for lens cleaning is suitable.)
CAUTION!
- Never use thinner, benzine, alcohol, glass cleaner,
etc, as this could lead to color change or change in
shape.
- Never scratch the monitor with anything hard or
apply strong pressure as this could leave marks or
result in malfunction.
Storage
If the monitor will not be used for a long period of time,
be sure to remove the power plug from the AC outlet.
CAUTION!
Do not leave the monitor in contact with rubber or plastic
items for long periods of time as this could lead to color
change or change in shape.
Troubleshooting
If you think the monitor may be faulty, please check the
following points before taking it to be repaired.
If afterwards it still does not work, please contact the
shop where you purchased the monitor or your nearest
Sharp authorized Service Center.
No image appears on the monitor (Power LED is not lit)
- Are the AC adapter and the power cord connected
properly? (p. 12)
No image appears on the monitor (Power LED is lit)
- Is the computer connected properly? (p. 12)
- Is the computer turned on?
- Does the computer's signal timing correspond to
monitor specifications? (p. 22)
- Is the computer in power-saving mode?
Control buttons do not work
- Is the adjustment lock on? (p. 15)
Only VGA image is displayed
- Does the Windows display timing setting meet
monitor specifications? Refer to the monitor signal
timings (p. 22) and set to appropriate timing.
The image appears distorted
- Does the computer's signal timing correspond to
monitor specifications? (p. 22)
- Perform automatic adjustment. (p. 15)
No sound can be heard from the speakers:
- Are the headphones connected?
- Perform the volume adjustment procedure.(p. 19)
The monitor's florescent tubes have a limited life
span.
- If the screen darkens, persistently flickers or
does not light up, the florescent tube unit may
need replacement. Please inquire at the shop
where you purchased the monitor or your
nearest Sharp authorized Service Center. (Never
attempt this replacement on your own.)
- In the initial period of use, due to the
characteristics of florescent tubes the screen
may flicker. (This is not a malfunction.) Should
this happen, check by first turning off the power,
then turning it on again.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113

Sharp LL-T15S1 Manuale utente

Categoria
TV
Tipo
Manuale utente