Sharp LL-T15S1 Manuale utente

R

LCD MONITOR

LCD FARBMONITOR

MONITEUR LCD

MONITOR LCD

LL-T15S1

OPERATION MANUAL

BEDIENUNGSANLEITUNG

MODE D’EMPLOI

MANUALE D’USO

MANUAL DE FUNCIONAMIENTO

- This operation manual is made using recycled paper.

- Diese Bedienungsanleitung ist auf Recycling-Papier gedruckt.

- Ce mode d’emploi a été imprimé sur du papier recyclé.

- Questo manuale operativo è prodotto con carta riciclata.

- Este manual de uso está impreso en papel reciclado.

Table of Contents / Inhaltsverzeichnis / Table des matières / Indice / Índice

English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Deutsch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Français . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Español. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

2

3

English

Table of Contents

Notice for Users in the USA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

TCO'99. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Notice for Users in Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Notice for Users in the UK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Notice for Users in Australia . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Tips and safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Connecting the monitor and turning the monitor on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting the monitor to a computer (PC etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting the monitor to headphones and a microphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Connecting the monitor to a power source. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Turning the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Turning the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Adjusting the screen display and speaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Automatic screen adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Adjusting the backlight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Manual screen adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Adjusting the speaker volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Monitor care and repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Monitor care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Instructions for installing a VESA compliant arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

4

Notice for Users in the USA

FCC Statement

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user's authority to operate this equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Use nothing but the included cables and AC cord to insure compliance with FCC regulation for Class B

computing equipment.

Declaration of Conformity

SHARP LCD Color Monitor LL-T15S1

This device complies with part 15 of the FCC rules. Operation is subject to the following conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undersized operation.

Responsible Party : SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430

TEL :1-800-BE-SHARP

* As an ENERGY STAR Partner, SHARP has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury. Disposal

of these materials may be regulated due to environmental considerations. For disposal or recycling

information, please contact your local authorities or the Electronics Industries Alliance:www.eiae.org

5

English

Congratulations!

You have just purchased a TCO'99 approved and labelled product! Your choice has provided you with a

product developed for professional use. Your purchase has also contributed to reducing the burden on the

environment and also to the further development of environmentally adapted electronics products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established method for encouraging the

adaptation of goods and services to the environment. The main problem, as far as computers and other

electronics equipment are concerned, is that environmentally harmful substances are used both in the

products and during their manufacture. Since it is not so far possible to satisfactorily recycle the majority of

electronics equipment, most of these potentially damaging substances sooner or later enter nature.

There are also other characteristics of a computer, such as energy consumption levels, that are important

from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of

electricity generation have a negative effect on the environment (e.g. acidic and climate-influencing

emissions, radioactive waste), it is vital to save energy. Electronics equipment in offices is often left running

continuously and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO'99 scheme which provides for international and

environmental labelling of personal computers. The labelling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees), Svenska Naturskyddsforeningen (The

Swedish Society for Nature Conservation) and Statens Energimyndighet (The Swedish National Energy

Administration).

Approval requirements cover a wide range of issues: environment, ergonomics, usability, emission of electric

and magnetic fields, energy consumption and electrical and fire safety.

The environmental demands impose restrictions on the presence and use of heavy metals, brominated and

chlorinated flame retardants, CFCs (freons) and chlorinated solvents, among other things. The product must

be prepared for recycling and the manufacturer is obliged to have an environmental policy which must be

adhered to in each country where the company implements its operational policy.

The energy requirements include a demand that the computer and/or display, after a certain period of

inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to

reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for example, in respect of the reduction of

electric and magnetic fields, physical and visual ergonomics and good usability.

Below you will find a brief summary of the environmental requirements met by this product. The complete

environmental criteria document may be ordered from:

6

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): dev[email protected]

Current information regarding TCO'99 approved and labelled products may also be

obtained via the Internet, using the address: http://www.tco-info.com/

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is

to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of

flame retardant substances. Most flame retardants contain bromine or chloride, and those flame retardants

are chemically related to another group of environmental toxins, PCBs. Both the flame retardants containing

bromine or chloride and the PCBs are suspected of giving rise to severe health effects, including

reproductive damage in fish-eating birds and mammals, due to the bio-accumulative* processes. Flame

retardants have been found in human blood and researchers fear that disturbances in foetus development

may occur.

The relevant TCO'99 demand requires that plastic components weighing more than 25 grams must not

contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the

printed circuit boards since no substitutes are available.

Cadmium**

Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer

displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99

requirement states that batteries, the colour-generating layers of display screens and the electrical or

electronics components must not contain any cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It damages the nervous system and is toxic in

high doses. The relevant TCO'99 requirement states that batteries may not contain any mercury. It also

demands that mercury is not present in any of the electrical or electronics components associated with the

labelled unit. There is however one exception. Mercury is, for the time being, permitted in the back light

system of flat panel monitors as there today is no commercially available alternative. TCO aims on removing

this exception when a mercury free alternative is available.

CFCs (freons)

The relevant TCO'99 requirement states that neither CFCs nor HCFCs may be used during the manufacture

and assembly of the product. CFCs (freons) are sometimes used for washing printed circuit boards. CFCs

break down ozone and thereby damage the ozone layer in the stratosphere, causing increased reception on

earth of ultraviolet light with e.g. increased risks of skin cancer (malignant melanoma) as a consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and capacitors. Lead damages the nervous

system and in higher doses, causes lead poisoning. The relevant TCO´99 requirement permits the inclusion

of lead since no replacement has yet been developed.

*

Bio-accumulative is defined as substances which accumulate within living organisms

**

Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.

7

English

Notice for Users in Europe

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by

93/68/EEC.

Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit

Änderung 93/68/EWG.

Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées

par la directive 93/68/CEE.

Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/

EEG.

Dette udstyr overholder kravene i direktiv nr. 89/336/EEC og 73/23/EEC med tillæg nr. 93/68/EEC.

Quest' apparecchio è conforme ai requisiti delle direttive 89/336/EEC e 73/23/EEC, come emendata dalla

direttiva 93/68/EEC.

Η εγκατασταση ανταποκρινεται στιζ απαιτησειζ των οδηγιων τηζ Ευρωπαïκηζ Ενωσηζ 89/336/ΕΟΚ κατ 73/23/ΕΟΚ,

óπωζ οι κανονισµοι αυτοι συµπληρωθηκαν απó την οδηγια 93/68/ΕΟΚ.

Este equipamento obedece às exigências das directivas 89/336/CEE e 73/23/CEE, na sua versão

corrigida pela directiva 93/68/CEE.

Este aparato satisface las exigencias de las Directivas 89/336/CEE y 73/23/CEE, modificadas por medio

de la 93/68/CEE.

Denna utrustning uppfyller kraven enligt riktlinjerna 89/336/EEC och 73/23/EEC så som komplette ras av

93/68/EEC.

Dette produktet oppfyller betingelsene i direktivene 89/336/EEC og 73/23/EEC i endringen 93/68/EEC.

Tämä laite täyttää direktiivien 89/336/EEC ja 73/23/EEC vaatimukset, joita on muutettu direktiivillä 93/68/

EEC.

CAUTION :

TO PREVENT ELECTRICAL SHOCK, DISCONNECT THE AC CORD BEFORE SERVICING.

CAUTION :

FOR A COMPLETE ELECTRICAL DISCONNECTION, PULL OUT THE MAIN PLUG.

VORSICHT :

UM DIE STROMZUFUHR VOLLSTÄNDIG ZU UNTERBRECHEN, DEN NETZSTECKER HERAUSZIEHEN

ENTFERNEN.

ATTENTION :

POUR UN ARRET TOTAL DU SYSTEMS, DECONNECTEZ LA PRISE DE COURANT SECTEUR.

VARNING :

FÖR TOTAL ELEKTRISK URKOPPLING, KOPPLA UR KONTAKTEN OCH.

PRECAUCION :

PARA UNA COMPLETA DESCONEXION ELECTRICA DESENCHUFE LA CLAVIJA DE LA RED.

8

Notice for Users in the UK

FOR CUSTOMERS IN U.K.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code :

GREEN-AND-YELLOW : Earth

BLUE : Neutral

BROWN : Live

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured

markings identifying the terminals in your plug proceed as follows. The wire which is coloured GREEN-

AND-YELLOW must be connected to the terminal in the plug which is marked by the letter E or by the

safety earth or coloured green or green-and-yellow.

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N

or coloured black.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter

L or coloured red.

Ensure that your equipment is connected correctly-if you are in any doubt consult a qualified

electrician.

"WARNING :THIS APPARATUS MUST BE EARTHED"

Notice for Users in Australia

Service Inquiries

Please contact your dealer for service if required or contact Sharp Corporation of Australia on

1 300 13 50 22 for referral to your nearest Sharp authorized Service Center.

9

English

- Under certain display conditions, minute specks or

spots may be noticeable. This is common for liquid

crystal monitors and is not a malfunction.

- The LCD panel has been manufactured using highly

elaborate technology. Properly working pixels com-

prise 99.99% of total pixels. However, please

understand that 0.01% or less of pixels may be

missing or be brighter than usual.

- Do not leave the screen displaying idly for long peri-

ods of time, as this could cause afterimage to remain.

- If the brightness is adjusted to the minimum setting it

may be difficult to see the screen.

- The quality of the computer signal may influence the

quality of the display. We recommend using a

computer able to emit high quality video signals.

- Never rub or tap the monitor with hard objects.

- Please understand that Sharp Corporation bears no

responsibility for errors made during use by the

customer or a third party, nor for any other malfunc-

tions or damage to this product arising during use,

except where indemnity liability is recognized under

law.

- This monitor and its accessories may be upgraded

without advance notice.

Location

- Do not use the monitor where ventilation is poor,

where there is a lot of dust, where humidity is high, or

where the monitor may come into contact with oil or

steam, as this could lead to fire.

- Ensure that the monitor does not come into contact

with water or other fluids. Ensure that no objects such

as paper clips or pins enter the monitor as this could

lead to fire or electric shock.

- Do not place the monitor on top of unstable objects

or in unsafe places. Do not allow the monitor to come

into contact with strong shocks or vibrations. Causing

the monitor to fall or topple over may damage it.

- Do not use in places where the monitor will be

subject to direct sunlight, near heating equipment or

anywhere else where there is likelihood of high

temperature, as this may lead to generation of

excessive heat and outbreak of fire.

The Power Cord

- Do not damage the power cord or place heavy

objects on it, stretch it or overly bend it. Also, do not

add extension cords. Damage to the cord may result

in fire or electric shock.

- Use only the AC adapter supplied with the monitor.

Using an AC adapter other than that supplied may

lead to fire.

- Insert the power plug directly into the AC outlet.

Adding an extension cord may lead to fire as a result

of overheating.

Monitor and accessory checklist

- Please check that the following items are included in

the package.

- LCD monitor (1)

- AC adapter (1)

- Audio cable (2)

- Utility Disk for Windows (1)

- Operation manual (1)

Notes:

- You are advised to retain the carton in case the

monitor needs to be transported.

- Authorship rights to the Monitor Settings Adjustment

Disk program are held by Sharp Corporation. Do not

reproduce it without permission.

Use of AC adapter

- Do not use the AC adapter for other than the

specified equipment.

- Unplug the AC adapter if it is not used for long time.

- Do not place any objects on the AC adapter.

- Do not use the AC adapter outdoors.

- Do not attempt to repair the AC adapter if it is broken

or malfunctioning. Refer the servicing to the service

representative.

- Do not try to open the AC adapter.

- Do not use water or wet cloth to cleaning of the AC

adapter.

Manual Scope

- In this booklet, Microsoft Windows 2000 will be

referred to as [Windows2000], Microsoft Windows

Millenium as [WindowsMe], Microsoft Windows 98 as

[Windows98], Microsoft Windows 95 as [Windows95],

and Microsoft Windows Version 3.1 as [Windows3.1].

When there is no need to distinguish between

programs, the term [Windows] will be used.

- Microsoft and Windows are registered trademarks of

Microsoft Corp. U.S. in the U.S. and the other

countries.

- Macintosh is a registered trademarks of Apple

Computer, INC.

Tips and safety precautions

10

Product description

1

7

8

9

10

11 12 13

14

15

2

3

456

1. MENU button ..........................This button is used to pop-up, select and close the OSD Menu.

2. SELECT button.......................When the On Screen Display (OSD) menu is displayed, choose the menu option to

be adjusted.

3.

buttons ............................When the OSD menu is displayed:

Change or adjust the adjustment values by switching between the OSD options

contents.

When the backlight adjustment bar is displayed:

The brightness of the backlight can be adjusted.

When the OSD menu / backlight adjustment bar is not displayed:

The speaker volume can be adjusted.

4. BRIGHT button .......................When the OSD menu is displayed:

The OSD menu disappears.

When the OSD menu is not displayed:

Switch between turning the automatic brightness adjustment function [ON] and

[OFF].

5. Power LED.............................. This LED is lit green when in use and orange when in power-saving mode.

6. Power button...........................Pressing this button turns the power on. (After turning the power on, it may take a

little time before the screen displays.)

Press the button again to turn the power off.

7. Speakers ................................Audio entering via the monitor and the external device connected to the monitor

can be heard.

8. Brightness sensor ..................Measures the brightness of the surrounding environment.

9. Microphone terminal ..............A microphone (to be purchased separately) can be connected here.

10. Headphone terminal .............. Headphones (to be purchased separately) can be connected here.

11. Audio input terminal ...............A computer’s audio output terminal can be connected here. (The audio cable

included should be used.)

12. Microphone output terminal ...A computer’s microphone terminal can be connected here. (The audio cable

included should be used.)

13. Power terminal........................Connect the AC adapter (included) here.

14. RGB signal cable ...................Connects to the computer's analog RGB output terminal.

15. Ventilation openings ..............Note: Never block the ventilation openings as this may lead to overheating inside

the monitor and result in malfunction.

Front view Rear viewLeft side surface

11

English

Product description

Standing up and adjusting the monitor

Standing up the monitor

Press down on the stand and lift up the top section of the

monitor.

Adjusting the monitor

Lightly holding both sides of the monitor, adjust it to a

suitable viewing angle.

25

3

Folding up the monitor (when packing it away)

- Except when folding away the monitor to transport it,

do not fold down the monitor. Unnecessarily folding

and unfolding the monitor could lead to malfunction.

1. Remove the AC adapter.

2. If carrying out adjustments to the monitor, place it

upright.

3. While pressing the rear lock disable button (1),

gently fold back the monitor (2).

(2)

(1)

12

Connecting the monitor and turning

the monitor on and off

Connecting the monitor to a computer

(PC etc.)

When connecting, ensure that both the monitor and

computer are switched off.

Note:

- Do not overly bend the cable or add extension cords

as this could lead to malfunction.

Using the audio cable included, the computer’s audio

output terminal or a microphone terminal can be con-

nected.

Note:

- DO only connect cables less than 3m to the LL-

T15S1.

RGB cable

If connecting to a D-sub 15 pin 2 row Apple

Power Macintosh, attach a Macintosh

conversion adapter (to be purchased

separately) to the RGB signal cable.

Macintosh conversion adapter

RGB signal cable

After connecting the adapter, tighten the

screws on each side to fix into place.

Firmly insert the analog RGB output

terminal (mini D-sub 15 pin with 3 rows)

then tighten the screws each side.

Connecting the monitor to headphones

and a microphone

Headphones and a microphone (both to be purchase

separately) can be connected here.

Note:

- Do not overly bend the cable or add extension cords

as this could lead to malfunction.

Note:

- DO only connect cables less than 3m to the LL-

T15S1.

- When the headphones are connected, no sound can

be heard from the monitor speakers.

Connecting the monitor to a power source

Before connecting, first turn off the monitor's main

power switch.

Note:

- Do not overly bend the cable or add extension cords

as this could lead to malfunction.

1. Connect the AC adapter to the monitor's power

terminal

2. Attach the power cord to the AC adapter and place

the power plug into the AC terminal.

Audio cable

Audio input

terminal

Microphone output

terminal

PC (Audio output

terminal)

PC (Microphone

terminal)

Microphone

terminal

Headphone

terminal

Microphone

Headphones

Power terminal

AC adapter

Power cord

13

English

Connecting the monitor and turning the monitor on and off

Turning the power on

1. Turn on the computer.

2. Press the monitor's power button.

The power LED will be lit green, and the screen will

display an image.

Note:

- When setting up this monitor for the first time or after

having changed an aspect of the current system,

perform an automatic screen adjustment before use

(p. 15).

Turning the power off

1. Turn the computer off.

2. Press the monitor's power button.

The Power LED will disappear.

Installing set-up information

Depending on the computer or OS, it may be necessary

to use the computer to operate the installation of monitor

set-up information etc. If so, follow the steps below to

install the monitor set-up information. (Depending on the

type of computer or OS, command names and methods

may differ. Please follow the computer’s own operation

manual while reading this.)

For Windows95

Installing monitor set-up information into Windows95.

This explanation assumes that the floppy disk drive is "A

drive".

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced Properties], and

[Monitor], then [Change].

5. Click on [Have disk], confirm that [Copy manufactur-

er's files from:] is [A:] then click [OK].

6. Confirm that the monitor details are selected, and

click [OK].

7. Check that the monitor details are displayed, then

click [Apply].

8. Click [OK], and close the window.

9. Remove the Utility Disk from the A drive.

For Windows98

Installing monitor set-up information into Windows98.

This explanation assumes that the floppy disk drive is "A

drive".

If the "Add new Hardware Wizard" has appeared:

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.], then

click [Next].

4. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],

and click [OK].

5. Confirm that the monitor details are selected, then

click [Next], [Next], and [Finish]. If the "Add New

Hardware Wizard" appears, repeat the installation

commands beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:

1. Place the Utility Disk in the computer's A drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug & Play

monitors] and click on [Change].

6. Click [Next].

7. Click on [Display a list of all the drivers in a specific

location, so you can select the driver you want.], then

click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],

and click [OK].

9. Confirm that the monitor details are selected, then

click [Next], [Next], and [Finish].

10. Check that the monitor details are displayed, then

click [Apply].

11. Click [OK], and close the window.

12. Remove the Utility Disk from the A drive.

Power LED Power button

14

Connecting the monitor and turning the monitor on and off

For Windows2000

Installing monitor set-up information into Windows2000.

This explanation assumes that the floppy disk drive is "A

drive".

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. Click on [Properties], [Driver] and [Update Driver].

6. When [Upgrade Device Driver Wizard] appears, click

[Next].

7. Check [Display a list of the known drivers for this

device so that I can choose a specific driver] and

click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],

and click [OK].

9. Select the monitor from the list displayed and click

[Next].

10. Click [Next], confirm that the monitor's name appears

on the screen, and click [Finish]. If [The Digital

Signature Not Found] appears, click [Yes].

11. Click on [Close].

12. Click [OK], and close the window.

13. Remove the Utility Disk from the A drive.

For WindowsMe

Installing monitor set-up information into WindowsMe.

This explanation assumes that the floppy disk drive is "A

drive".

If the "Add new Hardware Wizard" has appeared:

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Check [Specify the location of the driver [Advanced]]

and click [Next].

3. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.], then

click [Next].

4. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],

and click [OK].

5. Select the monitor details from the list, then click

[Next], [Next], and [Finish]. If the "Add new Hardware

Wizard" appears, repeat the installation commands

beginning from 2 above.

6. Remove the Utility Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:

1. Place the Utility Disk in the computer's A drive.

2. Click on the [Start] button. From [Settings], choose

[Control Panel].

3. Double click on [Display].

4. Click on [Settings], [Advanced] and [Monitor].

5. In [Options], check [Automatically detect Plug & Play

monitors] and click on [Change].

6. Check [Specify the location of the driver [Advanced]]

and click [Next].

7. Check [Display a list of all the drivers in a specific

location, so you can select the driver you want.] and

click [Next].

8. When [Models] is displayed, click on [Have disk],

confirm that [Copy manufacturer's files from:] is [A:],

and click [OK].

9. Select the monitor details, then click [Next], [Next],

and [Finish].

10. Check that the monitor details are displayed, then

click [Apply].

11. Click [OK], and close the window.

12. Remove the Utility Disk from the A drive.

15

English

Adjusting the screen display and speaker volume

Adjusting the screen dispray

Automatic screen adjustment (right column)

The clock, phase, H-POS (horizontal positioning) and V-

POS (vertical positioning) functions can be adjusted

automatically.

Adjustment of backlight (p.16)

Brightness of backlight can be adjusted.

Manual adjustment (p. 17)

Fine adjustments can be made using the On Screen

Display (OSD) Menu.

Note:

- All adjustments will be saved even after turning the

power off.

All Reset MENU

All adjustment values can be returned to their original

ex-factory values in one command.

1. Press the power button to turn off the monitor power.

2. Press the MENU button and the SELECT button

simultaneously, and while doing this press the power

button (i.e. turn the power on). When [ALL RESET]

appears on the screen, the reset is complete.

Notes:

- While ALL RESET is displayed, the control buttons

do not function.

- It is not possible to reset values when the adjustment

lock is in place. Remove the adjustment lock before

attempting to operate control buttons.

Adjustment lock function

By disabling the control buttons (i.e. setting the lock) any

attempted changes to adjusted values will be voided.

1. Press the power button to turn off the monitor power.

2. While pressing the MENU button, press the power

button (i.e. turn the power on).

When the menu is unlocked:

[ADJUSTMENT LOCKED] will appear on the screen,

and the lock will be set.

When the menu is locked:

[ADJUSTMENT UNLOCKED] will appear on the

screen, and the lock will be removed.

Note:

- When the lock setting is on, only the power button

and the speaker volume adjustment can be

operated.

Choosing a message language

Messages displayed on the screen and OSD Menu

contents can be changed to the following languages.

English, German, French, Italian, Spanish.

1. Turn off the monitor.

2. Pressing the SELECT and

buttons simultaneously,

press the power button (i.e. turn the power on).

The Language Selection Menu (LANGUAGE) will be

displayed on the screen.

3. Use the SELECT button to choose a language.

4. Press the MENU button.

The setting is complete. From now, messages and

adjustment menus will be displayed in the chosen

language.

Automatic screen adjustment

Options in MENU 1 (ADJUSTMENT) can be adjusted

automatically (CLOCK, PHASE, H-POS,

V-POS).

Note:

- When setting up this monitor for the first time or after

having changed an aspect of the current system,

perform an automatic screen adjustment before use.

1. First display an image that makes the entire screen

very bright. If you are using Windows, you can use

the Adjustment Pattern on the accompanying Utility

Disk (p.16).

2. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

[

]

A

AA

A

CC

D

E

HV

H

J

K

LM

M

N

L

O

P

S

T

TT

U

8

V

12

4

6

4

H

67

0

8

0

5

60

1

0

0 5

z

0x

-

OPS-

:k:4Hz

E

3. Press the button.

The screen will become dark and [ADJUSTING] will

be displayed. After a few seconds the ADJUSTMENT

Menu will return. (The automatic adjustment is now

complete.)

4. Press the MENU button 4 times to make the On

Screen Display (OSD) Menu disappear.

Notes:

- In most cases automatic adjustment is sufficient.

- If necessary due to any of the following, manual

adjustments (p. 17) can be performed after the

automatic adjustment.

- When further fine adjustment is needed.

- When [OUT OF ADJUST] is displayed. (When the

screen displays an entirely dark image, the

automatic screen adjustment may be disabled.

When making an automatic adjustment, be sure

to either use the Adjustment Pattern or try

displaying an image that makes the entire

screen very bright.)

16

Opening the Adjustment Pattern (for Windows)

If you are using Windows, you can use the Adjustment

Pattern on the accompanying Utility Disk.

This explanation is for Windows 95/98/Me/2000, and

assumes that the floppy disk drive is "A drive".

1. Place the Utility Disk (provided) into the computer's A

drive.

2. Open [My Computer] and select [3 ½ Floppy (A:)]. If

using Windows 3.1, open [File Manager] and choose

"A drive".

3. Double click on [Adj_uty.exe] to run the Adjustment

Program. The Adjustment Pattern will appear.

Notes:

- After completing the adjustments, press the

computer's [Esc] key to exit the Adjustment Program.

- If the floppy disk drive of your computer is not

"A drive", please read the below substituting the

floppy disk drive you are using in place of

"A drive" or "A".

- If your computer's display mode is set to 65K colors,

you may see the different color levels in each color

pattern or the gray scale may look colored. (This is

due to the specification of the input signal and is not

a malfunction.)

Adjusting the backlight

The backlight brightness can be set to change automati-

cally for use in different surroundings. (Automatic

brightness adjustment)

If the surroundings become brighter, the backlight will

become brighter.

If the surroundings become darker, the backlight will

become darker.

The brightness sensor measures the brightness of the

surrounding environment. Never place anything in front

of the brightness sensor.

Use the BRIGHT button to switch between automatic

brightness adjustment or no automatic brightness

adjustment.

Automatic brightness adjustment

AUTO BRIGHTNESS ON

[ ]

!" Press BRIGHT button

No automatic brightness adjustment

B R I G H T

AUTO BRIGHTNESS OFF

]

[

[ ]

3 1

Notes:

- The backlight adjustment bar automatically

disappears several seconds after the last command.

- On the screen that appears after the values have

been set, the brightness can be further adjusted by

pressing the

and buttons.

Adjusting the brightness

Carry out the commands without the On Screen Display

(OSD) Menu displayed. If the OSD Menu is displayed,

press the MENU button (several times may be required)

and begin when the OSD Menu has disappeared.

When adjusting brightness automatically

Using the adjusted backlight brightness as a base, the

brightness can be adjusted automatically.

1. Without the OSD Menu being displayed, press the

button or the button. The BRIGHT bar will appear at

the bottom section of the screen.

AUTO BRIGHTNESS ON

[ ]

2. Adjust by pressing the button (darker) or the

button (lighter).

Depending on the brightness of the surrounding

environment, the parameters for adjustment may be

limited.

3. Press the MENU button.

The OSD will disappear.

Adjusting the screen display and speaker volume

Adjustment pattern

17

English

When not adjusting brightness automatically

1. Without the OSD Menu being displayed, press the

button or the button.

B R I G H T

AUTO BRIGHTNESS OFF

]

[

[ ]

3 1

2. Adjust by pressing the button (darker) or the

button (lighter).

3. Press the MENU button.

The OSD Menu will disappear.

Note:

- The backlight adjustment bar automatically

disappears several seconds after the last command.

Manual screen adjustment

Fine adjustments can be made using On Screen Display

(OSD) Menu provided.

1. Display an image that makes the entire screen very

bright. If using Windows, you can open and use the

Adjustment Pattern on the accompanying Utility Disk.

(p. 16)

2. Press the MENU button.

The ADJUSTMENT Menu will be displayed.

[

]

A

AA

A

CC

D

E

HV

H

J

K

LM

M

N

L

O

P

S

T

TT

U

8

V

12

4

6

4

H

67

0

8

0

5

60

1

0

0 5

z

0x

-

OPS-

:k:4Hz

E

At this point relevant menu options can be adjusted.

Each time the MENU button is pressed the next

menu is selected. (MENU 1 → 2 → 3 → 4 → OSD

Menu disappears)

Notes:

- The OSD Menu automatically disappears several

seconds after the last command.

- This explanation is based on using the Adjustment

Pattern (for Windows) to make adjustments.

MENU 1: ADJUSTMENT

[

]

A

AA

A

CC

D

E

HV

H

J

K

LM

M

N

L

O

P

S

T

TT

U

8

V

12

4

6

4

H

67

0

8

0

5

60

1

0

0 5

z

0x

-

OPS-

:k:4Hz

E

MANUAL: Individual menu options are manually

adjusted.

AUTO: Every menu option is automatically

adjusted.

Notes:

- Press the

button to select AUTO.

- To choose a menu option: SELECT button

- To go to MENU 2: MENU button

CLOCK

The figure below demonstrates how to adjust so that

vertical flicker noise is not emitted. (

buttons)

PHASE

The figure below demonstrates how to adjust so that

horizontal flicker noise is not emitted. (

buttons)

Note:

- Adjustments to PHASE should be made only after

CLOCK has been correctly set.

H-POS (horizontal positioning) and V-POS

(vertical positioning)

To center the screen image within the boundaries of the

screen, adjust the left-right (H-POS) values and the up-

down (V-POS) values. ( buttons)

Adjusting the screen display and speaker volume

Horizontal flicker noise

Vertical flicker noise

Screen frame

Adjustment

pattern

18

MENU 2: GAIN CONTROL

BLACK LEVEL and CONTRAST are optimized before

shipment, but can be adjusted to suit.

[]

AA A

GA I

LM

O

N

T

OT

CROL

U U

N

12

3

4

4678

0

620K 16M

0x

N

HV60:Hz 8Hzk:4

BLACK LEVEL

CONTRAST

DISPLAY COLORS

MANUAL: Individual menu options are manually

adjusted.

AUTO: Every menu option is automatically

adjusted using the Auto Gain Control*

function,

Notes:

- Press the

button to select AUTO.

- To choose a menu option: SELECT button

- To go to MENU 3: MENU button

* Auto Gain Control function

- The Auto Gain Control adjusts contrast and black

level based on the brightest color of the image

displayed. If you are not using the Adjustment Pattern

it is necessary to have an area of

5 mm x 5 mm of white displayed, and if not

adjustments may not be possible. (In such case,

[OUT OF ADJUST] will appear and setting values

remain unchanged.)

- To perform the Auto Gain Control function, first go to

MENU 3 and set [WHITE BALANCE] to something

other than [USER]. If [USER] is set, Auto Gain Control

will be disabled.

BLACK LEVEL

Total screen brightness can be adjusted while watching

the color pattern. (

buttons)

CONTRAST

While watching the color pattern, adjustments can be

made so that all graduations appear. ( buttons)

DISPLAY COLORS

Maximum display colors can be set. ( buttons)

260K (260,000) and 16M (16.19 million)

MENU 3: WHITE BALANCE

WHITE BALANCE (color tone) can be adjusted as

necessary. (As adjustments are made before shipment,

there is no real necessity for further alteration.)

D

OR

WH I

C

B

O

L

U ESR

A

NE

C

LM

T

E

A

S

W

AT

[]

124 6780x

HV60:Hz 8Hzk:4

3

4

0

20

R-CONTRAST

G-CONTRAST

B-CONTRAST

Notes:

- On settings other than [STD] not all graduations can

be displayed. To display all graduations, set to STD.

- Selecting USER will display the setting values for [R-

CONTRAST], [G-CONTRAST] and

[B-CONTRAST], in order to make fine adjustments.

- To choose a menu option: SELECT button

- To go to MENU 4: MENU button

COOL . . . . . Color tone bluer than standard

- . . . . . . . Color tone slightly bluer than standard

STD. . . . . . . Color tone standard setting

- . . . . . . . Color tone slightly redder than standard

WARM . . . . . Color tone redder than standard

USER

R-CONTRAST . . . button for blue-green

button for red

G-CONTRAST . . .

button for purple

button for green

B-CONTRAST . . .

button for yellow

button for blue

Adjusting the screen display and speaker volume

Color pattern

19

English

Adjusting the screen display and speaker volume

MENU 4: MODE SELECT

0

H-SO

M

O

0

D

V-

POD

SD

T

4

IS

SLETCE

NOI

E

OPTIS

LS

NIE

NOI

046027

[]

124 6780x

HV60:Hz 8Hzk:4

ELVSCAL ING

EL

1

ELV

EL

2

Notes:

- Depending on the resolution of the input signal, even

if menu options can be selected, the display may not

change.

- To choose a menu option: SELECT button

- When adjustment complete: MENU button

OSD H-POSITION (OSD horizontal position)

The position of the OSD display can be moved to the left

and right. (

buttons)

OSD V-POSITION (OSD vertical position)

The position of the OSD display can be moved up and

down. ( buttons)

400 LINES (degree of resolution)

You can specify the horizontal resolution of a 400-line

screen when using US text, etc.

(

buttons)

640 640 X 400 dot mode

720 720 X 400 dot mode (US text etc.)

Note:

- As the resolution input for other than 400 lines is

done automatically, there is no need to set it.

SCALING (Level of scaling)

The sharpness of the image can be adjusted.

( buttons)

Note:

- When the display mode is set to less than

1024 x 768 pixels, the display is enlarged to cover

the whole screen (i.e. the side ratio of the display

may change).

- Display modes of 1024 X 768 pixels cannot be

changed.

Adjusting the speaker volume

Without the OSD menu and backlight adjustment bar

being displayed, press the

buttons to adjust the

volume.

20

Monitor care and repair

Monitor care

Always remove the plug from the AC outlet when

cleaning the monitor.

Cabinet and control panel section

Use a soft dry cloth to lightly wipe away any grime from

the cabinet and control panel.

If very dirty, apply neutral detergent to a dampened soft

cloth, wring it out well and wipe away grime.

LCD panel section

Use a soft dry cloth to lightly wipe away dirt and dust

from the surface of the LCD panel. (A soft cloth such as

gauze or that used for lens cleaning is suitable.)

CAUTION!

- Never use thinner, benzine, alcohol, glass cleaner,

etc, as this could lead to color change or change in

shape.

- Never scratch the monitor with anything hard or

apply strong pressure as this could leave marks or

result in malfunction.

Storage

If the monitor will not be used for a long period of time,

be sure to remove the power plug from the AC outlet.

CAUTION!

Do not leave the monitor in contact with rubber or plastic

items for long periods of time as this could lead to color

change or change in shape.

Troubleshooting

If you think the monitor may be faulty, please check the

following points before taking it to be repaired.

If afterwards it still does not work, please contact the

shop where you purchased the monitor or your nearest

Sharp authorized Service Center.

No image appears on the monitor (Power LED is not lit)

- Are the AC adapter and the power cord connected

properly? (p. 12)

No image appears on the monitor (Power LED is lit)

- Is the computer connected properly? (p. 12)

- Is the computer turned on?

- Does the computer's signal timing correspond to

monitor specifications? (p. 22)

- Is the computer in power-saving mode?

Control buttons do not work

- Is the adjustment lock on? (p. 15)

Only VGA image is displayed

- Does the Windows display timing setting meet

monitor specifications? Refer to the monitor signal

timings (p. 22) and set to appropriate timing.

The image appears distorted

- Does the computer's signal timing correspond to

monitor specifications? (p. 22)

- Perform automatic adjustment. (p. 15)

No sound can be heard from the speakers:

- Are the headphones connected?

- Perform the volume adjustment procedure.(p. 19)

The monitor's florescent tubes have a limited life

span.

- If the screen darkens, persistently flickers or

does not light up, the florescent tube unit may

need replacement. Please inquire at the shop

where you purchased the monitor or your

nearest Sharp authorized Service Center. (Never

attempt this replacement on your own.)

- In the initial period of use, due to the

characteristics of florescent tubes the screen

may flicker. (This is not a malfunction.) Should

this happen, check by first turning off the power,

then turning it on again.

La pagina sta caricando ...

Sharp LL-T15S1 Manuale utente

Sharp LL-T15S1 Manuale utente

in altre lingue

Documenti correlati