Smart Control
User Manual
Statement
Safety first (important)
List of items
Specifications
Meet your smart control
Preparations
Use the device
Error code description
How to charge the smart control?
Declaration of conformity
After-sales services
01
02
02
03
04
10
11
12
13
13
01
Thank you for choosing xTool products!
If you use the product for the first time, read carefully all the accompanying materials of the product to improve your experience with it. If you do not use
the product according to the instructions and requirements of the Manual, or mis-operate the product due to misunderstanding, etc., the Company shall
bear no responsibility for any loss resulting therefrom.
The Company has collated the content of the Manual rigorously and carefully, but errors or omissions may remain.
The Company is committed to continuously improving product functions and service quality, and therefore reserves the right to change any product or
software described in the Manual and the content of the Manual at any time.
The Manual is intended to help you use the product properly and does not include any description of hardware and software configuration. For product
configuration, refer to the related contract (if any) and packing list, or consult your distributor. Images in the Manual are for reference only and the actual
product may vary.
Protected by copyright laws and regulations, the Manual shall not be reproduced or transcribed in any way, or be transmitted on any wired or wireless
network in any manner, or be translated into any language, or be modified in any way, such as content, image, or layout modification, without the prior
written authorization of the Company.
The Company is committed to continuously improving the product and related materials. The product and the Manual are subject to change, and
updates can be found at xtool.com.
Read and get familiar with all safety precautions and measures before using this product. Strictly follow all safety precautions. Ensure that this product is
properly assembled and is working properly.
Follow the operating principles:
■ Check the product for damage every time before you use it. Do not operate it in any way when any damage or defect is found.
■ Ensure that the workspace is clean and flat.
■ Do not leave the product unattended during operation. Pay attention to whether it is working properly.
■ The machine works properly at the temperature of –10 to 35 and can be stored at the temperature of –10 to 45. Do not operate it at a temperature
lower than 0.
Statement
Safety first (important)
01 02
List of items
Smart control Transceiver USB cable User manual
Specifications
Time setting range
Temperature setting range
Size 117.2 mm x 91.4 mm x 35.1 mm
100 ~ 205 212 ~ 400
0s ~ 600s
xTool Smart Control Transceiver
Model
Input
Maximum RF transmit power
FCC ID
IC 22796-MXHP002A
2AH9Q-MXHP002A
2.4G(2420-2470MHz)< 20 dBm
5V100mA
MXH-P002a-001
03 04
Preparations
Connect to a power supply
Level switch button
Start button
Temperature setting knob
Time setting knob
Screen
Power switch
USB port (Type-C)
Temperature
unit switch
Working state indicator
Pairing button
Battery level
Temperature
Unit of temperature
Time Unit of time
Level
Smart Press Auto
Module connection icon Smart Control pairing icon
Meet your smart control
05 06
Pair with the Smart Control
Hold down for 3sInsert the transceiver
Toggle the switch to ON
Blinking blue Hold down for 3s
Blinking Stopping blinking, pairing succeeded
07 08
Smart Control settings
1. Switch between preset levels
Press to switch the level between A, B, C, and D
Turn the knobs to adjust the temperature and time Hold down 3s to save your setting as the level
Press Select a level
A 30s
30s
50s
60s
B
C
D
140 285
160 320
195 385
205 400
Temperature TimeLevel
2. Define a level yourself
09 10
3. Set the time and temperature directly
Turn the knobs to adjust the temperature and time
Press the level switch button
at level D to exit the level
mode, and then set the time
and temperature.
Use the device
The usage of the smart control may vary according to heat pressing
devices.
Visit support.xtool.com or scan the following QR code to find details
about how to use xTool devices with the smart control.
11 12
Error code description
If you see any error code displayed on the screen, contact xTool team for help.
Error code Description
Exceptions occur on the temperature
sensor on the heating plate.
The temperature sensor is damaged.
The heating plate cannot be heated.
The temperature of the heating plate
does not go as expected.
The temperature of the heating plate
does not go as expected.
Exceptions occur on the temperature
sensor on the circuit board.
Error code Description
The radiating fins are overheated.
Exceptions occur when the heating
plate is heated.
Exceptions occur when the heating
plate is heated.
Exceptions occur when the heating
plate is heated.
Exceptions occur on the wireless chip.
How to charge the Smart Control?
Makeblock Co. Ltd. declara por la presente que este producto cumple los
requisitos esenciales y otras disposiciones pertinentes de la directiva RED
2014/53/UE y la directiva RoHS 2011/65/UE.
ES
Makeblock Co., Ltd. déclare par la présente que ce produit est conforme
aux principales exigences et autres dispositions pertinentes de la directive
Directive RED 2014/53/UE et de la directive RoHS 2011/65/UE.
FR
la Makeblock Co., Ltd., con la presente dichiara che questo prodotto è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti alla
direttiva RED 2014/53/UE e della direttiva RoHS 2011/65/UE.
IT
Hiermit erklärt Makeblock Co., Ltd., dass dieses Produkt die grundlegen-
den Anforderungen und anderen relevanten Vorschriften der Richtlinie
RED 2014/53/EU und der RoHS-Richtlinie 2011/65/EU einhält.
DE
Hereby, Makeblock Co., Ltd., declares that this product is in compliance
with the essential requirements and other relevant provisions of Directive
RED 2014/53/EU and the RoHS directive 2011/65/EU.
EN
Pelo presente, a Makeblock Co., Ltd., declara que este produto está em con
ormidade com os requisitos essenciais e outras disposições relevantes da
Diretiva RED 2014/53/UE e da Diretiva RoHS 2011/65/UE.
PT
Declaration of conformity
For technical support, contact us at [email protected]om.
For more information about after-sales services, visit support.xtool.com.
After-sales services
13
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
FCC radiation exposure statement(For Smart Control Transceiver)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body.
RF warning statement:(For Smart Control)
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC statement
-English: "
This device complies with Industry Canada licence-exempt RSS standard(
s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that
may cause undesired operation of the device."
-French:"
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement."
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
