PNI CT25PW Manuale utente

PNI CT25PW

Smart thermostat / Интелигентен термостат

Intelligenter Thermostat / Termostato inteligente /

Thermostat intelligent / Intelligens termosztát / Termostato

intelligente / Slimme thermostaat / Inteligentny termostat

Termostat inteligent incastrabil

EN User manual .................................... 3

BG Ръководство за употреба........... 22

DE Benutzerhandbuch ......................... 43

ES Manual de usuario ........................... 64

FR Manuel utilisateur ........................... 85

HU Használati utasítás .......................... 106

IT Manuale utente ............................... 127

NL Handleiding ..................................... 148

PL Instrukcja obsługi ............................ 169

RO Manual de utilizare .......................... 190

3

Introduction

PNI CT25PW is a programmable built-in thermostat for

underﬂoor heating with water, which turns the heating

system on and o depending on the set temperature. You

can set dierent temperatures for dierent time periods

and days.

The thermostat can work and display the temperature in 3

ways:

- according to the ﬂoor sensor

- according to the built-in air sensor

- according to both sensors

How quickly the air in the room heats up does not depend

on the settings of the thermostat, but on the size and the

design of the heating system.

The thermostat has a non-energized relay output that sends

an On/O command to the boiler or other water heating

systems.

4

Special warnings

As the product must be connected to a 230V mains

supply and to a heating equipment, the installation must

be performed only by qualiﬁed personnel, in order to

avoid irreparable damage to the product or to the heating

equipment to which it is connected, defects which are not

subject to warranty.

For the ﬁrst conﬁguration of the thermostat, we recommend

that you call a specialist.

Main features

• Illuminated LCD screen

• 3 operating modes : Eco, Manual and Scheduled

• 4 programmable periods for each day of the week

• Display the set temperature and the room temperature

• Opened window detection function

• Key lock function

• Anti-freeze function

5

Technical speciﬁcations

• Power supply: 230V

• Maximum load: 16A

• Temperature range that can be set: 5°C ~ 35°C

• Displayed temperature range: 0 ~ +50°C

• Sensor: NTC 10K

• Temperature measurement accuracy: ± 0.1°C

• Temperature setting step: ± 0.5°C

• 2.4Ghz WiFi

• Transmission power: 100mW

• Water resistance: IP30

• Housing: ABS with ﬁre standard UL94-5

6

Product description

Up

Child protection active

(keys locked)

No external sensor

alarm

Over-heating

protection

WiFi signal level

On/Off

Settings

Down

Open window

detection

Hour

Day of the week

Current period

7

Connecting the thermostat to the WiFi network

and adding it to the Tuya Smart application

Note: Make sure you have your mobile phone connected to the

2.4GHz WiFi network and the GPS location enabled. For a

quick setup, make sure the phone and thermostat are as close to

each other as possible (1-3 m).

WARNING:

Make sure you have a 2.4 Ghz wireless network available and

that you have connected your phone to it. The new generation

routers and phones also come equipped with a 5 Ghz wireless

network activated, and the devices connect automatically on

this frequency. The thermostat cannot be connected to the

5 Ghz wireless network because it only works on the 2.4 Ghz

frequency. To conﬁgure the router and the 2.4 Ghz wireless

network, call a specialist.

8

1. Connect your phone to the WiFi network.

2. Download the app Tuya Smart.

Android iOS

3. Open the application, create an account and log in.

4. Add the thermostat to the application by pressing the +

icon in the upper right corner of the screen or by pressing

the Add device button (this button shows only when you

do not have any devices added to the application).

5. Select the option Small Home Appliances on the left side

of the screen.

6. From the list of devices displayed on the right side of the

screen, select Thermostat (Wi-Fi).

7. Select the WiFi network you want to connect to and add

9

the password. Click Next.

8. In the next interface, select the option EZ Mode from the

upper right corner.

9. Long press the key from the thermostat to enter the

pairing mode. Then, press the key ˄. The icon will

blink on the screen.

10. Then check Conﬁrm the indicator is blinking rapidly.

Click Next.

11. The application will start scanning nearby devices.

12. After you identify your device, you will receive the

Added Successfully conﬁrmation.

13. To ﬁnish, click the Done button.

From the application, you can turn the thermostat on and

o, you can change the operation mode of the thermostat

(Manual, Eco, Auto) or you can set the weekly program.

10

11

Setting the thermostat

Set the time and the day of the week

Long press the key for about 5 seconds. The minutes icon

will ﬂash on the screen. Press the keys ˄ and ˅ to reach the

desired value. Short press the key to conﬁrm. The hours

indicator will ﬂash on the screen. Press the keys ˄ and ˅ to

reach the desired value. Short press the key to conﬁrm.

The day indicator will ﬂash on the screen. Press the keys ˄

and ˅ to reach the desired value. Wait a few seconds, the

screen will return to normal display mode.

Setting the working mode

Shortly press the key to switch between Eco (Holiday),

Scheduled or Manual mode.

12

Scheduled mode

1. After setting the time and day of the week,

you will enter the programming mode of

the 4 periods for each day of the week.

It starts with setting the ﬁrst day of the week and the

ﬁrst period.

2. The start time* and temperature* will ﬂash on the screen

in turn. Each time you press the key the selected value

will be conﬁrmed and you will move to the next setting.

3. After setting the time and temperature for the ﬁrst

period, it automatically switches to the second period,

then to the third and fourth.

4. This will continue with the setting of the 4 periods for

each day of the week (1 - 7).

*Note: The time can be changed from quarter to quarter of

an hour, and the temperature from half to half a degree. For

example, you can set the time to 07:15 or 07:30 or 07:45 and

the temperature to 22.0°C or 22.5°C or 23.0°C.

13

Default settings

Period 1 2

Hour Temp. Hour Temp.

12345

(M-F) 07:00 22°C 08:30 19°C

6 (S) 08:00 22°C 08:30 22°C

7 (S) 08:00 22°C 08:30 22°C

Period 3 4

Hour Temp. Hour Temp.

12345

(M-F) 17:00 22°C 17:00 19°C

6 (S) 17:00 22°C 22:00 19°C

7 (S) 17:00 22°C 22:00 19°C

14

Manual mode

Shortly press the key to set the Manual operation mode.

Only the time, day of the week and temperature will be

displayed on the screen.

Press the keys ˄ and ˅ to set the desired temperature. The

heating system will turn on and o to keep this temperature

for 24 hours.

Eco mode (Holiday)

Shortly press the key to set the Eco operation mode. A

suitcase icon will appear on the screen.

Press the keys ˄ and ˅ to set the desired temperature.

15

Functions

Keylock function

If Child Protection has been activated in the advanced

settings menu, the thermostat keys will lock as soon as the

screen backlight turns o.

Long press the key ˄ and ˅ for about 5 seconds to

temporarily unlock the keys.

Open window detection function (OWD)

If the function has been activated from the advanced

settings menu (see page 165), the thermostat will switch o

the heating if the room temperature drops suddenly (default

setting 2°C in 15 minutes). This sudden drop of temperature

occurs when a window or door is opened while the heating

system is operating. The icon appears on the screen.

The device will return to its original operating mode after

30 minutes. The icon disappears from the screen. By

pressing any key, you will exit OWD mode.

16

Advanced settings

Switch o the thermostat by brieﬂy pressing the key .

Press the keys and ˄ simultaneously for about 6 seconds.

Use the keys ˄ and ˅ to change the settings and the key

to move to the next setting.

Menu Description Range Default

01 Internal sensor

calibration -8°C~8°C 0°C

02 Setting the maximum

temperature limit 5°C ~35°C 35°C

03 Setting the minimum

temperature limit 5°C ~35°C 5°C

04 Sensor selection 0: Air

1: Floor

2: Air&Floor

17

05 Antifreeze

temperature 5°C~15°C 5°C

06 External sensor

calibration -8°C~8°C 0°C

07* Display ﬂoor

temperature Read only

08* Floor temperature

overheating limit 20°C~80°C 32°C

09 Hysteresis 0.2°C~6°C 0.3°C

11 Child protection 0: Keys

unlocked

1: Keys

locked

0

12 Open window

detection (OWD) 1: On

0: O 0

* - Menus 07 and 08 appear only if option 2 (Air and ﬂoor

sensor) has been selected in menu 04.

18

13 The time interval in

which the sudden

drop in temperature is

detected

2~30 min. 15 min.

14 Degrees lost in the

time interval set at

menu 13

2°C

3°C

4°C

2°C

15 The time after which

the device returns to

its original mode of

operation

10~60 min 30 min.

17 Reset 0: No

1: Yes. Press

for 5 s.

Wait for the

device to

restart.

0

Software version

19

Connection diagrams

20

Installation instructions

Note:

Install the thermostat at eye level.

Before installing the thermostat, carefully read the instructions

in this manual.

The thermostat was designed to be recessed and requires a dose

(minimum depth 35mm) with side mounting screws.

La pagina sta caricando ...

PNI CT25PW Manuale utente

PNI CT25PW Manuale utente

in altre lingue

Documenti correlati

Altri documenti